# requirement:
# add uml1 uml2 uml3 in your /etc/hosts
+# FIXME - there is no reason to use all of these different
+# return codes, espcially when most of them are mapped to something
+# else anyway. The combination of test number and return code
+# figure out what failed.
+
set -e
SRCDIR=`dirname $0`
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
+MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
. $LUSTRE/tests/test-framework.sh
. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
-FORCE=${FORCE:-" --force"}
-
gen_config() {
rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
+ add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+ add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES\
--stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
- add_client client mds --lov lov1 --path $MOUNT
+ add_client client mds1 --lov lov1 --path $MOUNT
}
gen_second_config() {
add_lov lov2 mds2 --stripe_sz $STRIPE_BYTES\
--stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
add_ost ost2 --lov lov2 --dev $OSTDEV --size $OSTSIZE
- add_client client mds2 --lov lov2 --path $MOUNT2
+ add_client client --mds mds2 --lov lov2 --path $MOUNT2
}
start_mds() {
- echo "start mds service on `facet_active_host mds`"
- start mds --reformat $MDSLCONFARGS > /dev/null || return 94
+ echo "start mds1 service on `facet_active_host mds1`"
+ start mds1 --reformat $MDSLCONFARGS || return 94
+ start_lsvcgssd || return 501
}
+
stop_mds() {
- echo "stop mds service on `facet_active_host mds`"
- stop mds $@ > /dev/null || return 97
+ echo "stop mds1 service on `facet_active_host mds1`"
+ stop mds1 $@ || return 97
+ stop_lsvcgssd
}
start_ost() {
echo "start ost service on `facet_active_host ost`"
- start ost --reformat $OSTLCONFARGS > /dev/null || return 95
+ start ost --reformat $OSTLCONFARGS || return 95
}
stop_ost() {
echo "stop ost service on `facet_active_host ost`"
- stop ost $@ > /dev/null || return 98
+ stop ost $@ || return 98
}
mount_client() {
local MOUNTPATH=$1
+ start_lgssd || return 502
echo "mount lustre on ${MOUNTPATH}....."
- zconf_mount $MOUNTPATH > /dev/null || return 96
+ zconf_mount `hostname` $MOUNTPATH || return 96
}
umount_client() {
local MOUNTPATH=$1
echo "umount lustre on ${MOUNTPATH}....."
- zconf_umount $MOUNTPATH > /dev/null || return 97
+ zconf_umount `hostname` $MOUNTPATH || return 97
+ stop_lgssd
}
manual_umount_client(){
echo "manual umount lustre on ${MOUNTPATH}...."
do_facet client "umount $MOUNT"
+ stop_lgssd
}
setup() {
start_ost
start_mds
- mount_client $MOUNT
+ mount_client $MOUNT
}
cleanup() {
- umount_client $MOUNT || return -200
- stop_mds || return -201
- stop_ost || return -202
+ umount_client $MOUNT || return 200
+ stop_mds || return 201
+ stop_ost || return 202
+ # catch case where these return just fine, but modules are still not unloaded
+ /sbin/lsmod | grep -q portals
+ if [ 1 -ne $? ]; then
+ echo "modules still loaded..."
+ return 203
+ fi
}
check_mount() {
#create single point mountpoint
gen_config
+start_krb5_kdc || exit 1
test_0() {
start_ost
start_mds
- mount_client $MOUNT
+ mount_client $MOUNT
check_mount || return 41
- cleanup
+ cleanup || return $?
}
run_test 0 "single mount setup"
test_1() {
start_ost
echo "start ost second time..."
- start ost --reformat $OSTLCONFARGS > /dev/null
+ start ost --reformat $OSTLCONFARGS
start_mds
mount_client $MOUNT
check_mount || return 42
- cleanup
+ cleanup || return $?
}
run_test 1 "start up ost twice"
start_ost
start_mds
echo "start mds second time.."
- start mds --reformat $MDSLCONFARGS > /dev/null
+ start mds1 --reformat $MDSLCONFARGS
- mount_client $MOUNT
+ mount_client $MOUNT
check_mount || return 43
- cleanup
+ cleanup || return $?
}
run_test 2 "start up mds twice"
test_3() {
- setup
+ setup
mount_client $MOUNT
check_mount || return 44
umount_client $MOUNT
- cleanup
+ cleanup || return $?
}
run_test 3 "mount client twice"
test_4() {
setup
touch $DIR/$tfile || return 85
- stop_ost ${FORCE}
-
- # cleanup may return an error from the failed
- # disconnects; for now I'll consider this successful
- # if all the modules have unloaded.
- if ! cleanup ; then
- lsmod | grep -q portals && return 1
- fi
+ stop_ost --force
+ cleanup
+ eno=$?
+ # ok for ost to fail shutdown
+ if [ 202 -ne $eno ]; then
+ return $eno;
+ fi
return 0
}
run_test 4 "force cleanup ost, then cleanup"
test_5() {
setup
- touch $DIR/$tfile || return 86
- stop_mds ${FORCE} || return 98
+ touch $DIR/$tfile || return 1
+ stop_mds --force || return 2
- # cleanup may return an error from the failed
- # disconnects; for now I'll consider this successful
+ # cleanup may return an error from the failed
+ # disconnects; for now I'll consider this successful
# if all the modules have unloaded.
- if ! cleanup ; then
- lsmod | grep -q portals && return 1
- fi
+
+ # as MDS is down, umount without -f may cause blocking
+ # and this test will never finish. Blocking is possible
+ # as umount may want to cancel locks with RPC's and these
+ # RPC's will wait forever, as pinger thread will try to
+ # recover failed import endlessly.
+ #
+ # Thus, main point is: nobody should expect umount finish
+ # quickly and cleanly without -f flag when MDS or OST is
+ # down for sure. --umka
+ umount -f $MOUNT &
+ UMOUNT_PID=$!
+ sleep 2
+ echo "killing umount"
+ kill -TERM $UMOUNT_PID
+ echo "waiting for umount to finish"
+ wait $UMOUNT_PID
+ stop_lgssd
+
+ # cleanup client modules
+ $LCONF --force --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+
+ # stop_mds is a no-op here, and should not fail
+ stop_mds || return 4
+
+ # this should have --force flag specified, as umount -f
+ # will skip disconnect phase and thus OST will have one
+ # extra refcount what will cause class_cleanup() failure
+ # if --force is not specified. --umka
+ stop_ost --force || return 5
+
+ lsmod | grep -q portals && return 6
+ return 0
+}
+run_test 5 "force cleanup mds, then cleanup --force"
+
+test_5b() {
+ start_ost
+ start_mds
+ stop_mds
+
+ [ -d $MOUNT ] || mkdir -p $MOUNT
+ $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
+ start_lgssd || return 1
+ llmount -o nettype=$NETTYPE $mds_HOST://mds_svc/client_facet $MOUNT && exit 2
+
+ # cleanup client modules
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ stop_lgssd
+
+ # stop_mds is a no-op here, and should not fail
+ stop_mds || return 3
+ stop_ost || return 4
+
+ lsmod | grep -q portals && return 5
+ return 0
+
+}
+run_test 5b "mds down, cleanup after failed mount (bug 2712)"
+
+test_5c() {
+ start_ost
+ start_mds
+
+ [ -d $MOUNT ] || mkdir -p $MOUNT
+ $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
+ start_lgssd || return 1
+ llmount -o nettype=$NETTYPE $mds_HOST://wrong_mds_svc/client_facet $MOUNT && return 2
+
+ # cleanup client modules
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ stop_lgssd
+
+ stop_mds || return 3
+ stop_ost || return 4
+
+ lsmod | grep -q portals && return 5
return 0
+
+}
+run_test 5c "cleanup after failed mount (bug 2712)"
+
+test_5d() {
+ start_ost
+ start_mds
+ stop_ost --force
+
+ [ -d $MOUNT ] || mkdir -p $MOUNT
+ $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
+ start_lgssd || return 1
+ llmount $mds_HOST://mds1_svc/client_facet $MOUNT || return 1
+
+ umount $MOUNT || return 2
+ # cleanup client modules
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ stop_lgssd
+
+ stop_mds || return 3
+
+ lsmod | grep -q portals && return 4
+ return 0
+
}
-run_test 5 "force cleanup mds, then cleanup"
+run_test 5d "ost down, don't crash during mount attempt"
test_6() {
setup
manual_umount_client
mount_client ${MOUNT} || return 87
touch $DIR/a || return 86
- cleanup
+ cleanup || return $?
}
run_test 6 "manual umount, then mount again"
test_7() {
setup
manual_umount_client
- cleanup
+ cleanup || return $?
}
run_test 7 "manual umount, then cleanup"
start_ost
start_mds
- mount_client $MOUNT
- mount_client $MOUNT2
+ mount_client $MOUNT
+ mount_client $MOUNT2
check_mount2 || return 45
umount $MOUNT
- umount_client $MOUNT2
+ umount_client $MOUNT2
stop_mds
stop_ost
# backup the old values of PTLDEBUG and SUBSYSTEM
OLDPTLDEBUG=$PTLDEBUG
OLDSUBSYSTEM=$SUBSYSTEM
-
+
# generate new configuration file with lmc --ptldebug and --subsystem
PTLDEBUG="trace"
SUBSYSTEM="mdc"
start_ost
start_mds
mount_client $MOUNT
- [ "`cat /proc/sys/portals/debug`" = "1" ] && \
- echo "lmc --debug success" || return 1
- [ "`cat /proc/sys/portals/subsystem_debug`" = "16777216" ] && \
- echo "lmc --subsystem success" || return 1
+ CHECK_PTLDEBUG="`cat /proc/sys/portals/debug`"
+ if [ $CHECK_PTLDEBUG = "1" ]; then
+ echo "lmc --debug success"
+ else
+ echo "lmc --debug: want 1, have $CHECK_PTLDEBUG"
+ return 1
+ fi
+ CHECK_SUBSYSTEM="`cat /proc/sys/portals/subsystem_debug`"
+ if [ $CHECK_SUBSYSTEM = "2" ]; then
+ echo "lmc --subsystem success"
+ else
+ echo "lmc --subsystem: want 2, have $CHECK_SUBSYSTEM"
+ return 1
+ fi
check_mount || return 41
- cleanup
+ cleanup || return $?
# the new PTLDEBUG/SUBSYSTEM used for lconf --ptldebug/subsystem
- PTLDEBUG="inode"
- SUBSYSTEM="mds"
+ PTLDEBUG="inode+trace"
+ SUBSYSTEM="mds+ost"
# check lconf --ptldebug/subsystem overriding lmc --ptldebug/subsystem
start_ost
start_mds
+ CHECK_PTLDEBUG="`do_facet mds1 cat /proc/sys/portals/debug`"
+ if [ $CHECK_PTLDEBUG = "3" ]; then
+ echo "lconf --debug success"
+ else
+ echo "lconf --debug: want 3, have $CHECK_PTLDEBUG"
+ return 1
+ fi
+ CHECK_SUBSYSTEM="`do_facet mds1 cat /proc/sys/portals/subsystem_debug`"
+ if [ $CHECK_SUBSYSTEM = "20" ]; then
+ echo "lconf --subsystem success"
+ else
+ echo "lconf --subsystem: want 20, have $CHECK_SUBSYSTEM"
+ return 1
+ fi
mount_client $MOUNT
- [ "`cat /proc/sys/portals/debug`" = "2" ] && \
- echo "lconf --debug overriding success" || return 1
- [ "`cat /proc/sys/portals/subsystem_debug`" = "33554432" ] && \
- echo "lconf --subsystem overriding success" || return 1
check_mount || return 41
- cleanup
+ cleanup || return $?
# resume the old configuration
PTLDEBUG=$OLDPTLDEBUG
SUBSYSTEM=$OLDSUBSYSTEM
gen_config
}
-run_test 9 "test --ptldebug and --subsystem for lmc"
+run_test 9 "test --ptldebug and --subsystem for lmc and lconf"
+
+test_10() {
+ echo "generate configuration with the same name for node and mds"
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="broken.xml"
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ facet="mds1"
+ rm -f ${facet}active
+ add_facet $facet
+ echo "the name for node and mds is the same"
+ do_lmc --add mds --node ${facet}_facet --mds ${facet}_facet \
+ --dev $MDSDEV --size $MDSSIZE || return $?
+ do_lmc --add lov --mds ${facet}_facet --lov lov1 --stripe_sz \
+ $STRIPE_BYTES --stripe_cnt $STRIPES_PER_OBJ \
+ --stripe_pattern 0 || return $?
+ add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
+ facet="client"
+ add_facet $facet --lustre_upcall $UPCALL
+ do_lmc --add mtpt --node ${facet}_facet --mds mds1_facet \
+ --lov lov1 --path $MOUNT
+
+ echo "mount lustre"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+
+ echo "Success!"
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 10 "mount lustre with the same name for node and mds"
+
+test_11() {
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="conf11.xml"
+
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+ add_ost ost --dev $OSTDEV --size $OSTSIZE
+ add_client client mds1 --path $MOUNT --ost ost_svc || return $?
+ echo "Default lov config success!"
+
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+ add_ost ost --dev $OSTDEV --size $OSTSIZE
+ add_client client mds1 --path $MOUNT && return $?
+ echo "--add mtpt with neither --lov nor --ost will return error"
+
+ echo ""
+ echo "Success!"
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 11 "use default lov configuration (should return error)"
+
+test_12() {
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="batch.xml"
+ BATCHFILE="batchfile"
+
+ # test double quote
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
+ # --mkfsoptions "-I 128"
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "matched double quote success"
+ else
+ echo "matched double quote fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
+ # --mkfsoptions "-I 128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "unmatched double quote should return error"
+
+ # test single quote
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
+ # --mkfsoptions '-I 128'
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "matched single quote success"
+ else
+ echo "matched single quote fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
+ # --mkfsoptions '-I 128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "unmatched single quote should return error"
+
+ # test backslash
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
+ # --mkfsoptions \-\I\ \128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "backslash followed by a whitespace/letter success"
+ else
+ echo "backslash followed by a whitespace/letter fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
+ # --mkfsoptions -I\ 128\
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "backslash followed by nothing should return error"
+
+ rm -f $BATCHFILE
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
+
+test_13() {
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="conf13-1.xml"
+ SECONDXMLCONFIG="conf13-2.xml"
+
+ # check long uuid will be truncated properly and uniquely
+ echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ do_lmc --add net --node localhost --nid localhost.localdomain --nettype tcp
+ do_lmc --add mds --node localhost --mds mds1_name_longer_than_31characters
+ do_lmc --add mds --node localhost --mds mds2_name_longer_than_31characters
+ if [ ! -f "$XMLCONFIG" ]; then
+ echo "Error:no file $XMLCONFIG created!"
+ return 1
+ fi
+ EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
+ EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
+ FOUNDMDS1UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '1p' \
+ | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
+ FOUNDMDS2UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '2p' \
+ | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
+ if ([ $EXPECTEDMDS1UUID = $FOUNDMDS1UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS2UUID ]) || \
+ ([ $EXPECTEDMDS1UUID = $FOUNDMDS2UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS1UUID ]); then
+ echo "Success:long uuid truncated successfully and being unique."
+ else
+ echo "Error:expected uuid for mds1 and mds2: $EXPECTEDMDS1UUID; $EXPECTEDMDS2UUID"
+ echo "but: found uuid for mds1 and mds2: $FOUNDMDS1UUID; $FOUNDMDS2UUID"
+ return 1
+ fi
+
+ # check multiple invocations for lmc generate same XML configuration file
+ rm -f $XMLCONFIG
+ echo "Generate the first XML configuration file"
+ gen_config
+ echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
+ mv $XMLCONFIG $SECONDXMLCONFIG || return $?
+ echo "Generate the second XML configuration file"
+ gen_config
+ if [ `diff $XMLCONFIG $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
+ echo "Success:multiple invocations for lmc generate same XML file"
+ else
+ echo "Error: multiple invocations for lmc generate different XML file"
+ return 1
+ fi
+
+ rm -f $XMLCONFIG
+ rm -f $SECONDXMLCONFIG
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 13 "check new_uuid of lmc operating correctly"
+
+test_14() {
+ rm -f $XMLCONFIG
+
+ # create xml file with --mkfsoptions for ost
+ echo "create xml file with --mkfsoptions for ost"
+ add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+ add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES\
+ --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+ add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
+ --mkfsoptions "-Llabel_conf_14"
+ add_client client mds1 --lov lov1 --path $MOUNT
+
+ FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
+ EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
+ if [ $EXPECTEDSTRING != $FOUNDSTRING ]; then
+ echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
+ return 1
+ fi
+ echo "Success:mkfsoptions for ost written to xml file correctly."
+
+ # mount lustre to test lconf mkfsoptions-parsing
+ echo "mount lustre"
+ start_ost
+ start_mds
+ mount_client $MOUNT || return $?
+ if [ -z "`dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
+ echo "Error: the mkoptions not applied to mke2fs of ost."
+ return 1
+ fi
+ cleanup
+ echo "lconf mkfsoptions for ost success"
+
+ gen_config
+}
+run_test 14 "test mkfsoptions of ost for lmc and lconf"
+
+cleanup_15() {
+ trap 0
+ [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
+ if [ -f $MOUNTLUSTRE.sav ]; then
+ echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
+ mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
+ fi
+}
+
+test_15() {
+ start_ost
+ start_mds
+ echo "mount lustre on ${MOUNT} with $MOUNTLUSTRE....."
+ if [ -f "$MOUNTLUSTRE" ]; then
+ echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
+ mv $MOUNTLUSTRE $MOUNTLUSTRE.sav
+ fi
+ [ -f "$MOUNTLUSTRE" ] && echo "can't move $MOUNTLUSTRE" && return 40
+ trap cleanup_15 EXIT INT
+ [ ! `cp $LUSTRE/utils/llmount $MOUNTLUSTRE` ] || return $?
+ do_node `hostname` mkdir -p $MOUNT 2> /dev/null
+ # load llite module on the client if it isn't in /lib/modules
+ do_node `hostname` lconf --nosetup --node client_facet $XMLCONFIG
+ do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
+ `facet_active_host mds1`:/mds1_svc/client_facet $MOUNT ||return $?
+ echo "mount lustre on $MOUNT with $MOUNTLUSTRE: success"
+ [ -d /r ] && $LCTL modules > /r/tmp/ogdb-`hostname`
+ check_mount || return 41
+ do_node `hostname` umount $MOUNT
+
+ [ -f "$MOUNTLUSTRE" ] && rm -f $MOUNTLUSTRE
+ echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
+ do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
+ `facet_active_host mds1`:/mds1_svc/client_facet $MOUNT &&return $?
+ echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
+ cleanup || return $?
+ cleanup_15
+}
+run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
+
+is_digit() {
+ local value=$1
+ echo $value | grep -q "^[[:digit:]]*$"
+ return $?
+}
+
+test_16() {
+ TMPMTPT="/mnt/conf16"
+
+ if [ ! -f "$MDSDEV" ]; then
+ echo "no $MDSDEV existing, so mount Lustre to create one"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+ fi
+
+ echo "change the mode of $MDSDEV/OBJECTS,LOGS,PENDING to 555"
+ [ -d $TMPMTPT ] || mkdir -p $TMPMTPT
+ mount -o loop -t ext3 $MDSDEV $TMPMTPT || return $?
+ chmod 555 $TMPMTPT/OBJECTS || return $?
+ chmod 555 $TMPMTPT/LOGS || return $?
+ chmod 555 $TMPMTPT/PENDING || return $?
+ umount $TMPMTPT || return $?
+
+ echo "mount Lustre to change the mode of OBJECTS/LOGS/PENDING, then umount Lustre"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+
+ echo "read the mode of OBJECTS/LOGS/PENDING and check if they has been changed properly"
+ EXPECTEDOBJECTSMODE=`debugfs -R "stat OBJECTS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+ EXPECTEDLOGSMODE=`debugfs -R "stat LOGS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+ EXPECTEDPENDINGMODE=`debugfs -R "stat PENDING" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+
+ # check if values are empty
+ test "x$EXPECTEDOBJECTSMODE" = "x" && EXPECTEDOBJECTSMODE="<empty>"
+ test "x$EXPECTEDLOGSMODE" = "x" && EXPECTEDLOGSMODE="<empty>"
+ test "x$EXPECTEDPENDINGMODE" = "x" && EXPECTEDPENDINGMODE="<empty>"
+
+ # check if values are valid digits
+ is_digit $EXPECTEDOBJECTSMODE || {
+ echo "Invalid OBJECTS mode obtained from debugfs: $EXPECTEDOBJECTSMODE"
+ return 42
+ }
+
+ is_digit $EXPECTEDLOGSMODE || {
+ echo "Invalid LOGS mode obtained from debugfs: $EXPECTEDLOGSMODE"
+ return 42
+ }
+
+ is_digit $EXPECTEDPENDINGMODE || {
+ echo "Invalid PINDING mode obtained from debugfs: $EXPECTEDPENDINGMODE"
+ return 42
+ }
+
+ # check if values are those we expected
+ if [ "x$EXPECTEDOBJECTSMODE" = "x0777" ]; then
+ echo "Success: Lustre change the mode of OBJECTS correctly"
+ else
+ echo "Error: Lustre does not change the mode of OBJECTS properly"
+ echo "Expected value: 0777, actual one: $EXPECTEDOBJECTSMODE"
+ return 1
+ fi
+
+ if [ "x$EXPECTEDLOGSMODE" = "x0777" ]; then
+ echo "Success: Lustre change the mode of LOGS correctly"
+ else
+ echo "Error: Lustre does not change the mode of LOGS properly"
+ echo "Expected value: 0777, actual one: $EXPECTEDLOGSMODE"
+ return 1
+ fi
+
+ if [ "x$EXPECTEDPENDINGMODE" = "x0777" ]; then
+ echo "Success: Lustre change the mode of PENDING correctly"
+ else
+ echo "Error: Lustre does not change the mode of PENDING properly"
+ echo "Expected value: 0777, actual one: $EXPECTEDPENDINGMODE"
+ return 1
+ fi
+}
+run_test 16 "verify that lustre will correct the mode of OBJECTS/LOGS/PENDING"
+
+test_17() {
+ TMPMTPT="/mnt/conf17"
+
+ if [ ! -f "$MDSDEV" ]; then
+ echo "no $MDSDEV existing, so mount Lustre to create one"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+ fi
+
+ echo "Remove mds config log"
+ [ -d $TMPMTPT ] || mkdir -p $TMPMTPT
+ mount -o loop -t ext3 $MDSDEV $TMPMTPT || return $?
+ rm -f $TMPMTPT/LOGS/mds1_svc || return $?
+ umount $TMPMTPT || return $?
+
+ start_ost
+ start mds1 $MDSLCONFARGS && return 42
+ cleanup || return $?
+}
+run_test 17 "Verify failed mds_postsetup won't fail assertion (2936)"
+
+test_18() {
+ [ -f $MDSDEV ] && echo "remove $MDSDEV" && rm -f $MDSDEV
+ echo "mount mds with large journal..."
+ OLDMDSSIZE=$MDSSIZE
+ MDSSIZE=2000000
+ gen_config
+
+ echo "mount lustre system..."
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+
+ echo "check journal size..."
+ FOUNDJOURNALSIZE=`debugfs -R "stat <8>" $MDSDEV | awk '/Size: / { print $6; exit;}'`
+ if [ $FOUNDJOURNALSIZE = "79691776" ]; then
+ echo "Success:lconf creates large journals"
+ else
+ echo "Error:lconf not create large journals correctly"
+ echo "expected journal size: 79691776(76M), found journal size: $FOUNDJOURNALSIZE"
+ return 1
+ fi
+
+ cleanup || return $?
+
+ MDSSIZE=$OLDMDSSIZE
+ gen_config
+}
+run_test 18 "check lconf creates large journals"
equals_msg "Done"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff