ONLY=${ONLY:-"$*"}
-# bug number for skipped test:
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
+SRCDIR=$(dirname $0)
+PTLDEBUG=${PTLDEBUG:--1}
+LUSTRE=${LUSTRE:-$(dirname $0)/..}
+. $LUSTRE/tests/test-framework.sh
+init_test_env "$@"
+init_logging
+
+# tool to create lustre filesystem images
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
+
+# bug number for skipped test: LU-11915
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-# bug number for skipped test:
-# a tool to create lustre filesystem images
-ALWAYS_EXCEPT="32newtarball $ALWAYS_EXCEPT"
if $SHARED_KEY; then
-# bug number for skipped tests: LU-9795 (all below)
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 0 31 32a 32d 35a"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 53a 53b 54b 76a 76b"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76c 76d 78 103"
+ # bug number for skipped tests: LU-9795 (all below)
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 84 86 103"
fi
-SRCDIR=$(dirname $0)
-PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
+if ! combined_mgs_mds; then
+ # bug number for skipped test: LU-11991 LU-11990
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 32a 32b 32c 32d 32e 66"
+ # bug number for skipped test: LU-9897 LU-12032
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 84 123F"
+fi
-PTLDEBUG=${PTLDEBUG:--1}
-SAVE_PWD=$PWD
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-RLUSTRE=${RLUSTRE:-$LUSTRE}
-export MULTIOP=${MULTIOP:-multiop}
+# 8 22 40 165 (min)
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="45 69 106 111"
-. $LUSTRE/tests/test-framework.sh
-init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
-get_lustre_env
+build_test_filter
# use small MDS + OST size to speed formatting time
# do not use too small MDSSIZE/OSTSIZE, which affect the default journal size
STORED_MDSSIZE=$MDSSIZE
STORED_OSTSIZE=$OSTSIZE
MDSSIZE=200000
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] && MDSSIZE=400000
+[ "$mds1_FSTYPE" = zfs ] && MDSSIZE=400000
OSTSIZE=200000
-[ $(facet_fstype ost1) = "zfs" ] && OSTSIZE=400000
+[ "$ost1_FSTYPE" = zfs ] && OSTSIZE=400000
fs2mds_HOST=$mds_HOST
fs2ost_HOST=$ost_HOST
OSTDEV1_2=$fs2ost_DEV
OSTDEV2_2=$fs3ost_DEV
-if ! combined_mgs_mds; then
- # bug number for skipped test: LU-9860 LU-9860 LU-9860
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 43b 53b 54b"
- # bug number for skipped test: LU-9875 LU-9879 LU-9879 LU-9879 LU-9879
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 70e 80 84 87 100"
- # bug number for skipped test: LU-8110 LU-9879 LU-9879 LU-9879
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 102 104 105 107"
-fi
-
# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
fi
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test:
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT"
-# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-
-[ $MDSCOUNT -ge 2 ] &&
-# bug number for skipped test: LU-11915
- ALWAYS_EXCEPT+=" 110"
-# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-
-init_logging
-
#
require_dsh_mds || exit 0
require_dsh_ost || exit 0
-# 8 22 40 165 (min)
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="45 69 106 111"
-
assert_DIR
gen_config() {
# and stop to generate the startup logs.
start_mds
start_ost
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
stop_ost
stop_mds
}
}
reformat() {
- formatall
+ formatall
}
start_mgs () {
echo "start mgs service on $(facet_active_host mgs)"
- start mgs $(mgsdevname) $MGS_MOUNT_OPTS $@
+ start mgs $(mgsdevname) $MGS_MOUNT_OPTS "$@"
}
start_mdt() {
shift 1
echo "start mds service on `facet_active_host $facet`"
- start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
+ start $facet ${dev} $MDS_MOUNT_OPTS "$@" || return 94
+}
+
+stop_mdt_no_force() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on `facet_active_host $facet`"
+ stop $facet || return 97
}
stop_mdt() {
local num
for num in $(seq $MDSCOUNT); do
- start_mdt $num $@ || return 94
+ start_mdt $num "$@" || return 94
+ done
+ for num in $(seq $MDSCOUNT); do
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds${num} FULL
done
}
if ! combined_mgs_mds ; then
start_mgs
fi
- start_mds $@
+ start_mds "$@"
}
stop_mds() {
}
stop_mgs() {
- echo "stop mgs service on `facet_active_host mgs`"
- # These tests all use non-failover stop
- stop mgs -f || return 97
+ echo "stop mgs service on `facet_active_host mgs`"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
}
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
- start ost1 $(ostdevname 1) $OST_MOUNT_OPTS $@ || return 95
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS "$@" || return 95
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost1 FULL
}
stop_ost() {
start_ost2() {
echo "start ost2 service on `facet_active_host ost2`"
- start ost2 $(ostdevname 2) $OST_MOUNT_OPTS $@ || return 92
+ start ost2 $(ostdevname 2) $OST_MOUNT_OPTS "$@" || return 92
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost2 FULL
}
stop_ost2() {
}
mount_client() {
- local MOUNTPATH=$1
- echo "mount $FSNAME on ${MOUNTPATH}....."
- zconf_mount $(hostname) $MOUNTPATH || return 96
-}
+ local mountpath=$1
+ local mountopt="$2"
-remount_client() {
- local mountopt="remount,$1"
- local MOUNTPATH=$2
- echo "remount '$1' lustre on ${MOUNTPATH}....."
- zconf_mount $(hostname) $MOUNTPATH "$mountopt" || return 96
+ echo "mount $FSNAME ${mountopt:+with opts $mountopt} on $mountpath....."
+ zconf_mount $HOSTNAME $mountpath $mountopt || return 96
}
umount_client() {
local mountpath=$1
shift
echo "umount lustre on $mountpath....."
- zconf_umount $HOSTNAME $mountpath $@ || return 97
+ zconf_umount $HOSTNAME $mountpath "$@" || return 97
}
manual_umount_client(){
do_facet client "cp /etc/passwd $DIR/a" || return 71
do_facet client "rm $DIR/a" || return 72
# make sure lustre is actually mounted (touch will block,
- # but grep won't, so do it after)
- do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
+ # but grep won't, so do it after)
+ do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
echo "setup single mount lustre success"
}
cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $1 | head -n 1
}
-build_test_filter
-
if [ "$ONLY" == "setup" ]; then
setup
exit
setup
touch $DIR/$tfile || error "touch $DIR/$tfile failed"
stop_ost || error "Unable to stop OST1"
- umount_client $MOUNT -f || error “unmount $MOUNT failed”
+ umount_client $MOUNT -f || error "unmount $MOUNT failed"
cleanup_nocli
eno=$?
# ok for ost to fail shutdown
run_test 5e "delayed connect, don't crash (bug 10268)"
test_5f() {
- if combined_mgs_mds ; then
- skip "needs separate mgs and mds"
- return 0
- fi
+ combined_mgs_mds && skip "needs separate mgs and mds"
grep " $MOUNT " /etc/mtab &&
error false "unexpected entry in mtab before mount" && return 10
test_5g() {
modprobe lustre
- [ $(lustre_version_code client) -lt $(version_code 2.9.53) ] &&
- { skip "automount of debugfs missing before 2.9.53" && return 0; }
+ [ "$CLIENT_VERSION" -lt $(version_code 2.9.53) ] &&
+ skip "automount of debugfs missing before 2.9.53"
umount /sys/kernel/debug
$LCTL get_param -n devices | egrep -v "error" && \
error "lctl can't access debugfs data"
}
run_test 5g "handle missing debugfs"
+test_5h() {
+ setup
+
+ stop mds1
+ #define OBD_FAIL_MDS_FS_SETUP 0x135
+ do_facet mds1 "$LCTL set_param fail_loc=0x80000135"
+ start_mdt 1 && error "start mdt should fail"
+ start_mdt 1 || error "start mdt failed"
+ client_up || error "client_up failed"
+ cleanup
+}
+run_test 5h "start mdt failure at mdt_fs_setup()"
+
+test_5i() {
+ (( $MDS1_VERSION >= $(version_code 2.12.54) )) ||
+ skip "Need MDS version at least 2.12.54"
+
+ setup
+
+ stop mds1
+ #define OBD_FAIL_QUOTA_INIT 0xA05
+ do_facet mds1 "$LCTL set_param fail_loc=0x80000A05"
+ start_mdt 1 && error "start mdt should fail"
+ start_mdt 1 || error "start mdt failed"
+ client_up || error "client_up failed"
+ cleanup
+}
+run_test 5i "start mdt failure at mdt_quota_init()"
+
test_6() {
setup
manual_umount_client
}
run_test 9 "test ptldebug and subsystem for mkfs"
+test_10a() {
+ setup
+
+ if ! combined_mgs_mds; then
+ files=$(do_facet mgs "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MGS $files is a broken symlink"
+ fi
+
+ files=$(do_facet mds1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MDS $files is a broken symlink"
+
+ files=$(do_facet ost1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "OSS $files is a broken symlink"
+
+ files=$(do_facet client "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "clients $files is a broken symlink"
+
+ cleanup || error "cleanup failed with rc $?"
+}
+run_test 10a "find lctl param broken symlinks"
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
#
test_17() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
setup
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
test_18() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
log "use file $MDSDEV with MIN=$MIN"
fi
- [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
+ [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS"
echo "mount mds with large journal..."
setup
check_mount || error "check_mount failed"
- echo "check journal size..."
- local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
- if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
- log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
- else
- error "expected journal size > 32M, found $((FOUNDSIZE >> 20))M"
- fi
+ echo "check journal size..."
+ local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
+ if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
+ log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
+ else
+ error "expected journal size > 32M, found $((FOUNDSIZE >> 20))M"
+ fi
cleanup || error "cleanup failed with rc $?"
mount_client $MOUNT || error "mount_client $MOUNT failed"
check_mount || error "check_mount failed"
rm -f $DIR/$tfile || error "remove $DIR/$tfile failed."
- remount_client ro $MOUNT || error "remount_client with ro failed"
+ mount_client $MOUNT remount,ro || error "remount client with ro failed"
touch $DIR/$tfile && error "$DIR/$tfile created incorrectly"
[ -e $DIR/$tfile ] && error "$DIR/$tfile exists incorrectly"
- remount_client rw $MOUNT || error "remount_client with rw failed"
+ mount_client $MOUNT remount,rw || error "remount client with rw failed"
touch $DIR/$tfile || error "touch $DIR/$tfile failed"
MCNT=$(grep -c $MOUNT' ' /etc/mtab)
[ "$MCNT" -ne 1 ] && error "$MOUNT in /etc/mtab $MCNT times"
run_test 21c "start mds between two osts, stop mds last"
test_21d() {
- if combined_mgs_mds ; then
- skip "need separate mgs device" && return 0
- fi
- stopall
+ combined_mgs_mds && skip "need separate mgs device"
- reformat
+ stopall
+ reformat
start_mgs || error "unable to start MGS"
start_ost || error "unable to start OST1"
start_mds || error "MDS start failed"
wait_osc_import_state mds ost2 FULL
+ local zkeeper=${KEEP_ZPOOL}
+ stack_trap "KEEP_ZPOOL=$zkeeper" EXIT
+ KEEP_ZPOOL="true"
+
stop_ost || error "Unable to stop OST1"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
stop_mgs
#writeconf to remove all ost2 traces for subsequent tests
writeconf_or_reformat
+ KEEP_ZPOOL="${zkeeper}"
+
start_mgs || error "unable to start MGS"
}
run_test 21d "start mgs then ost and then mds"
test_21e() { # LU-5863
if [[ -z "$fs3ost_DEV" || -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
test_24b() {
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ combined_mgs_mds ||
+ skip "needs combined MGT and MDT device"
if [ -z "$fs2mds_DEV" ]; then
local dev=${SINGLEMDS}_dev
local MDSDEV=${!dev}
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --mgs --fsname=${FSNAME}2 \
--reformat $fs2mdsdev $fs2mdsvdev || exit 10
setup
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS &&
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && {
+ cleanup
error "start MDS should fail"
+ }
stop fs2mds -f
cleanup || error "cleanup failed with rc $?"
}
run_test 24b "Multiple MGSs on a single node (should return err)"
test_25() {
- setup
+ setup_noconfig
check_mount || error "check_mount failed"
local MODULES=$($LCTL modules | awk '{ print $2 }')
rmmod $MODULES 2>/dev/null || true
run_test 26 "MDT startup failure cleans LOV (should return errs)"
test_27a() {
+ cleanup
start_ost || error "Unable to start OST1"
start_mds || error "Unable to start MDS"
echo "Requeue thread should have started: "
test_27b() {
# FIXME. ~grev
- setup
+ setup_noconfig
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
run_test 27b "Reacquire MGS lock after failover"
test_28A() { # was test_28
- setup
- TEST="llite.$FSNAME-*.max_read_ahead_whole_mb"
- PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
- ORIG=$($LCTL get_param -n $TEST)
- FINAL=$(($ORIG + 1))
- set_persistent_param_and_check client "$TEST" "$PARAM" $FINAL
- FINAL=$(($FINAL + 1))
- set_persistent_param_and_check client "$TEST" "$PARAM" $FINAL
+ setup_noconfig
+
+ local TEST="llite.$FSNAME-*.max_read_ahead_whole_mb"
+ local PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
+ local orig=$($LCTL get_param -n $TEST)
+ local max=$($LCTL get_param -n \
+ llite.$FSNAME-*.max_read_ahead_per_file_mb)
+
+ orig=${orig%%.[0-9]*}
+ max=${max%%.[0-9]*}
+ echo "ORIG:$orig MAX:$max"
+ [[ $max -le $orig ]] && orig=$((max - 3))
+ echo "ORIG:$orig MAX:$max"
+
+ local final=$((orig + 1))
+
+ set_persistent_param_and_check client "$TEST" "$PARAM" $final
+ final=$((final + 1))
+ set_persistent_param_and_check client "$TEST" "$PARAM" $final
umount_client $MOUNT || error "umount_client $MOUNT failed"
mount_client $MOUNT || error "mount_client $MOUNT failed"
- RESULT=$($LCTL get_param -n $TEST)
- if [ $RESULT -ne $FINAL ]; then
- error "New config not seen: wanted $FINAL got $RESULT"
+
+ local result=$($LCTL get_param -n $TEST)
+
+ if [ $result -ne $final ]; then
+ error "New config not seen: wanted $final got $result"
else
- echo "New config success: got $RESULT"
+ echo "New config success: got $result"
fi
- set_persistent_param_and_check client "$TEST" "$PARAM" $ORIG
+ set_persistent_param_and_check client "$TEST" "$PARAM" $orig
cleanup || error "cleanup failed with rc $?"
}
run_test 28A "permanent parameter setting"
test_28a() { # LU-4221
- [[ $(lustre_version_code ost1) -ge $(version_code 2.5.52) ]] ||
- { skip "Need OST version at least 2.5.52" && return 0; }
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-4221: no such proc params for ZFS OSTs" && return
+ [[ "$OST1_VERSION" -ge $(version_code 2.5.52) ]] ||
+ skip "Need OST version at least 2.5.52"
+ [ "$ost1_FSTYPE" = zfs ] &&
+ skip "LU-4221: no such proc params for ZFS OSTs"
local name
local param
local new
local device="$FSNAME-OST0000"
- setup
+ setup_noconfig
# In this test we will set three kinds of proc parameters with
# lctl set_param -P or lctl conf_param:
run_test 28a "set symlink parameters permanently with lctl"
test_29() {
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs" && return
- setup > /dev/null 2>&1
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs"
+ setup_noconfig > /dev/null 2>&1
start_ost2 || error "Unable to start OST2"
sleep 10
# on the MDS servers which is tested with wait_osp_* below.
# For ost_server_uuid that only exist on client so filtering
# is safe.
- local PROC_ACT="osc.$FSNAME-OST0001-osc-*.active"
- local PROC_UUID="osc.$FSNAME-OST0001-osc-[!M]*.ost_server_uuid"
+ local PROC_ACT="os[cp].$FSNAME-OST0001-osc-[^M]*.active"
+ local PROC_UUID="os[cp].$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
- ACTV=$($LCTL get_param -n $PROC_ACT)
+ ACTV=$($LCTL get_param -n $PROC_ACT)
DEAC=$((1 - $ACTV))
set_persistent_param_and_check client $PROC_ACT $PARAM $DEAC
# also check ost_server_uuid status
run_test 29 "permanently remove an OST"
test_30a() {
- setup
+ setup_noconfig
echo Big config llog
- TEST="llite.$FSNAME-*.max_read_ahead_whole_mb"
- ORIG=$($LCTL get_param -n $TEST)
- LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
- for i in ${LIST[@]}; do
- set_persistent_param_and_check client "$TEST" \
- "$FSNAME.llite.max_read_ahead_whole_mb" $i
+ local path="llite.$FSNAME-*"
+ local cpath="$FSNAME.llite"
+ local param="max_read_ahead_whole_mb"
+
+ local test="${path}.$param"
+ local conf="${cpath}.$param"
+
+ local orig=$($LCTL get_param -n $test)
+ local list=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
+ for i in ${list[@]}; do
+ set_persistent_param_and_check client $test $conf $i
done
# make sure client restart still works
umount_client $MOUNT
mount_client $MOUNT || error "mount_client $MOUNT failed"
- [ "$($LCTL get_param -n $TEST)" -ne "$i" ] &&
- error "Param didn't stick across restart $($TEST) != $i"
+ [ "$($LCTL get_param -n $test)" -ne "$i" ] &&
+ error "Param didn't stick across restart $($test) != $i"
pass
echo Erase parameter setting
if [[ $PERM_CMD == *"set_param -P"* ]]; then
- do_facet mgs "$PERM_CMD -d $TEST" ||
- error "Erase param $TEST failed"
+ do_facet mgs "$PERM_CMD -d $test" ||
+ error "Erase param $test failed"
else
- do_facet mgs "$PERM_CMD \
- -d $FSNAME.llite.max_read_ahead_whole_mb" ||
- error "Erase param $FSNAME.llite.max_read_ahead_whole_mb failed"
+ do_facet mgs "$PERM_CMD -d $conf" ||
+ error "Erase param $conf failed"
fi
umount_client $MOUNT
mount_client $MOUNT || error "mount_client $MOUNT failed"
- FINAL=$($LCTL get_param -n $TEST)
- echo "deleted (default) value=$FINAL, orig=$ORIG"
+ local final=$($LCTL get_param -n $test)
+ echo "deleted (default) value=$final, orig=$orig"
+ orig=${orig%%.[0-9]*}
+ final=${final%%.[0-9]*}
# assumes this parameter started at the default value
- [ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
+ [ "$final" -eq "$orig" ] ||
+ error "Deleted value=$final -ne orig=$orig"
cleanup || error "cleanup failed with rc $?"
}
run_test 30a "Big config llog and permanent parameter deletion"
test_30b() {
- setup
+ setup_noconfig
local orignids=$($LCTL get_param -n \
osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
T32_QID=60000
T32_BLIMIT=40960 # Kbytes
T32_ILIMIT=4
-
+T32_PRJID=1000
+T32_PROLIMIT=$((T32_BLIMIT/10))
#
# This is not really a test but a tool to create new disk
# image tarballs for the upgrade tests.
local dst=.
local src=/etc/rc.d
local tmp=$TMP/t32_image_create
- local server_version=$(lustre_version_code $SINGLEMDS)
local remote_dir
local striped_dir
local pushd_dir
+ local pfl_dir
+ local pfl_file
+ local dom_dir
+ local dom_file
+ local flr_dir
+ local flr_file
+ local pj_quota_dir
+ local pj_quota_file
+ local target_dir
if [ $FSNAME != t32fs -o \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o \
- $OSTCOUNT -ne 1 -o -z "$OSTDEV1" ]; then
- error "Needs FSNAME=t32fs MDSCOUNT=2 " \
- "MDSDEV1=<nonexistent_file>" \
- "MDSDEV2=<nonexistent_file>" \
- "(or MDSDEV, in the case of b1_8)" \
- "OSTCOUNT=1 OSTDEV1=<nonexistent_file>"
+ $OSTCOUNT -ne 2 -o -z "$OSTDEV1" ]; then
+ error "Needs FSNAME=t32fs MDSCOUNT=2 " \
+ "MDSDEV1=<nonexistent_file> " \
+ "MDSDEV2=<nonexistent_file> " \
+ "(or MDSDEV, in the case of b1_8) " \
+ "OSTCOUNT=2 OSTDEV1=<nonexistent_file> " \
+ "OSTDEV2=<nonexistent_file>"
fi
mkdir $tmp || {
mkdir $tmp/src || return 1
tar cf - -C $src . | tar xf - -C $tmp/src
- dd if=/dev/zero of=$tmp/src/t32_qf_old bs=1M \
- count=$(($T32_BLIMIT / 1024 / 4))
- chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
# format ost with comma-separated NIDs to verify LU-4460
local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
setupall
- [[ $server_version -ge $(version_code 2.3.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.3.50) ]] ||
$LFS quotacheck -ug /mnt/$FSNAME
$LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
/mnt/$FSNAME
- tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
-
if [[ $MDSCOUNT -ge 2 ]]; then
remote_dir=/mnt/$FSNAME/remote_dir
$LFS mkdir -i 1 $remote_dir
tar cf - -C $tmp/src . | tar xf - -C $remote_dir
- if [[ $server_version -ge $(version_code 2.7.0) ]]; then
+ target_dir=$remote_dir
+ if [[ $MDS1_VERSION -ge $(version_code 2.7.0) ]]; then
striped_dir=/mnt/$FSNAME/striped_dir_old
$LFS mkdir -i 1 -c 2 $striped_dir
tar cf - -C $tmp/src . | tar xf - -C $striped_dir
fi
+ else
+ tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
+ target_dir=/mnt/$FSNAME
fi
+ # add project quota #
+ [[ $mds1_FSTYPE == "ldiskfs" &&
+ $MDS1_VERSION -gt $(version_code 2.9.55) ]] ||
+ [[ $mds1_FSTYPE == "zfs" &&
+ $MDS1_VERSION -gt $(version_code 2.10.53) ]] && {
+ pj_quota_dir=$target_dir/project_quota_dir
+ pj_quota_file_old=$pj_quota_dir/pj_quota_file_old
+
+ enable_project_quota
+ set_mdt_qtype ugp ||
+ error "enable mdt quota failed"
+
+ set_ost_qtype ugp ||
+ error "enable ost quota failed"
+
+ mkdir -p $pj_quota_dir
+ $LFS setquota -p $T32_PRJID -b 0 -B $T32_PROLIMIT -i 0 \
+ -I $T32_ILIMIT $pj_quota_dir ||
+ error "setquota -p $T32_PRJID failed"
+
+ $LFS setstripe $pj_quota_file_old -c 1 ||
+ error "setstripe $pj_quota_file_old failed"
+
+ chown $T32_QID:$T32_QID $pj_quota_file_old ||
+ error "chown $pj_quota_file_old failed"
+
+ change_project -p $T32_PRJID $pj_quota_file_old
+
+ mkdir -p $tmp/src/project_quota_dir
+ cp $pj_quota_file_old $tmp/src/project_quota_dir/
+ }
+
+ #####################
+ tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
+
+ #if [[ $MDSCOUNT -ge 2 ]]; then
+ # remote_dir=/mnt/$FSNAME/remote_dir
+ # $LFS mkdir -i 1 $remote_dir
+ # tar cf - -C $tmp/src . | tar xf - -C $remote_dir
+
+ # if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
+ # striped_dir=/mnt/$FSNAME/striped_dir_old
+ # $LFS mkdir -i 1 -c 2 $striped_dir
+ # tar cf - -C $tmp/src . | tar xf - -C $striped_dir
+ # fi
+ #fi
+
+ # PFL file #
+ if [[ $MDS1_VERSION -ge $(version_code 2.9.51) ]]; then
+ pfl_dir=$target_dir/pfl_dir
+ pfl_file=$pfl_dir/pfl_file
+ mkdir -p $pfl_dir
+ $LFS setstripe -E 2M -c 1 -o 0 -E -1 -S 2M -c 1 -o 1 \
+ $pfl_file ||
+ error "Create PFL file failed"
+
+ dd if=/dev/urandom of=$pfl_file bs=1k count=3k
+ mkdir -p $tmp/src/pfl_dir
+ cp $pfl_file $tmp/src/pfl_dir/
+ fi
+
+ ############
+ # DoM / FLR file #
+ if [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]]; then
+ dom_dir=$target_dir/dom_dir
+ dom_file=$dom_dir/dom_file
+ flr_dir=$target_dir/flr_dir
+ flr_file=$flr_dir/flr_file
+
+ mkdir -p $dom_dir
+ $LFS setstripe -E 1M -L mdt -E -1 -S 4M $dom_file
+ dd if=/dev/urandom of=$dom_file bs=1k count=2k
+ mkdir -p $tmp/src/dom_dir
+ cp $dom_file $tmp/src/dom_dir
+ # FLR #
+ mkdir -p $flr_dir
+ LFS mirror create -N2 $flr_file
+ dd if=/dev/urandom of=$flr_file bs=1k count=1
+ mkdir -p $tmp/src/flr_dir
+ cp $flr_file $tmp/src/flr_dir
+ fi
+ ############
stopall
mkdir $tmp/img || return 1
pushd_dir=/mnt/$FSNAME
if [[ $MDSCOUNT -ge 2 ]]; then
pushd_dir=$remote_dir
- if [[ $server_version -ge $(version_code 2.7.0) ]]; then
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
pushd $striped_dir
ls -Rni --time-style=+%s >$tmp/img/list2
popd
$LCTL get_param -n version | head -n 1 |
sed -e 's/^lustre: *//' >$tmp/img/commit
- [[ $server_version -ge $(version_code 2.3.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.3.50) ]] ||
$LFS quotaon -ug /mnt/$FSNAME
$LFS quota -u $T32_QID -v /mnt/$FSNAME
$LFS quota -v -u $T32_QID /mnt/$FSNAME |
echo $T32_BLIMIT > $tmp/img/blimit
echo $T32_ILIMIT > $tmp/img/ilimit
+ $MULTIOP /mnt/$FSNAME/orph_file Ouw_c&
+ pid=$!
+ sync
+ stop_mdt_no_force 1
+ debugfs -R "ls /PENDING" ${MDSDEV1:-$MDSDEV}
+ cp ${MDSDEV1:-$MDSDEV} $tmp/img
+ start_mdt 1
+ kill -s USR1 $pid
+ wait $pid
+
+ #################
stopall
pushd $tmp/src
uname -r >$tmp/img/kernel
uname -m >$tmp/img/arch
- mv ${MDSDEV1:-$MDSDEV} $tmp/img
for num in $(seq 2 $MDSCOUNT); do
local devname=$(mdsdevname $num)
local facet=mds$num
devname=$(mdsvdevname $num)
mv $devname $tmp/img
done
- mv $OSTDEV1 $tmp/img
+
+ for num in $(seq $OSTCOUNT); do
+ local devname=$(ostdevname $num)
+ local facet=oss$num
+ [[ $(facet_fstype $facet) != zfs ]] ||
+ devname=$(ostdevname $num)
+ mv $devname $tmp/img
+ done
version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
sed -e 's/\./_/g') # E.g., "1.8.7" -> "1_8"
dst=$(cd $dst; pwd)
pushd $tmp/img
- tar cjvf $dst/disk$version-$(facet_fstype $SINGLEMDS).tar.bz2 -S *
+ tar cjvf $dst/disk$version-"$mds1_FSTYPE".tar.bz2 -S *
popd
rm -r $tmp
# variable "tarballs".
#
t32_check() {
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
- if [ "$CLIENTONLY" ]; then
- skip "Client-only testing"
- exit 0
- fi
-
- if ! $r which $TUNEFS; then
- skip_env "tunefs.lustre required on $node"
- exit 0
- fi
+ ! $r which "$TUNEFS" && skip_env "tunefs.lustre required on $node"
- local IMGTYPE=$(facet_fstype $SINGLEMDS)
+ local IMGTYPE="$mds1_FSTYPE"
- tarballs=$($r find $RLUSTRE/tests -maxdepth 1 \
- -name \'disk*-$IMGTYPE.tar.bz2\')
+ [[ -n "$T32IMAGE" ]] && tarballs=$T32IMAGE ||
+ tarballs=$($r find $RLUSTRE/tests -maxdepth 1 \
+ -name \'disk*-$IMGTYPE.tar.bz2\')
- if [ -z "$tarballs" ]; then
- skip "No applicable tarballs found"
- exit 0
- fi
+ [ -z "$tarballs" ] && skip "No applicable tarballs found"
}
t32_test_cleanup() {
local tmp=$TMP/t32
local facet=$SINGLEMDS
- local fstype=$(facet_fstype $facet)
local rc=$?
+ echo "== cleanup with rc=$rc =="
if $shall_cleanup_lustre; then
umount $tmp/mnt/lustre || rc=$?
fi
if $shall_cleanup_ost; then
$r $UMOUNT $tmp/mnt/ost || rc=$?
fi
+ if $shall_cleanup_ost1; then
+ $r $UMOUNT $tmp/mnt/ost1 || rc=$?
+ fi
$r rm -rf $tmp
rm -rf $tmp
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
local poolname
local poolname_list="t32fs-mdt1 t32fs-ost1"
local node=$1
local all_removed=false
local i=0
- local fstype=$(facet_fstype $SINGLEMDS)
- [ $fstype == "zfs" ] && do_rpc_nodes $node "service zed stop"
+ [ "$mds1_FSTYPE" == zfs ] && do_rpc_nodes $node "service zed stop"
while ((i < 20)); do
echo "Unloading modules on $node: Attempt $i"
- do_rpc_nodes $node $LUSTRE_RMMOD $fstype &&
+ do_rpc_nodes $node $LUSTRE_RMMOD "$mds1_FSTYPE" &&
all_removed=true
do_rpc_nodes $node check_mem_leak || return 1
if $all_removed; then
do_rpc_nodes $node load_modules
return 0
fi
- if [ $fstype == "zfs" ]; then
+ if [ "$mds1_FSTYPE" == zfs ]; then
do_rpc_nodes $node "$ZPOOL status -v"
fi
sleep 5
local facet=$1
local fsname=$2
local mnt=$3
- local fstype=$(facet_fstype $SINGLEMDS)
local qval
local cmd
# lustre will estimate the object count usage. This fails quota
# verification in 32b. The object quota usage should be accurate after
# zfs-0.7.0 is released.
- [ $fstype == "zfs" ] && {
+ [ "$mds1_FSTYPE" == zfs ] && {
local zfs_version=$(do_facet $facet cat /sys/module/zfs/version)
[ $(version_code $zfs_version) -lt $(version_code 0.7.0) ] && {
}
set_persistent_param_and_check $facet \
- "osd-$fstype.$fsname-MDT0000.quota_slave.enabled" \
+ "osd-$mds1_FSTYPE.$fsname-MDT0000.quota_slave.enabled" \
"$fsname.quota.mdt" ug
set_persistent_param_and_check $facet \
- "osd-$fstype.$fsname-OST0000.quota_slave.enabled" \
+ "osd-$mds1_FSTYPE.$fsname-OST0000.quota_slave.enabled" \
"$fsname.quota.ost" ug
chmod 0777 $mnt
return 0
}
+getquota() {
+ local spec=$4
+ local uuid=$3
+ local mnt=$5
+
+ sync_all_data > /dev/null 2>&1 || true
+
+ [ "$uuid" != "global" ] || uuid=$mnt
+
+ $LFS quota -v "$1" "$2" $mnt |
+ awk 'BEGIN { num='$spec' } { if ($1 == "'$uuid'") \
+ { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
+ | tr -d "*"
+}
+
t32_test() {
local tarball=$1
local writeconf=$2
local dne_upgrade=${dne_upgrade:-"no"}
local dom_upgrade=${dom_upgrade:-"no"}
+ local project_upgrade=${project_upgrade:-"no"}
local ff_convert=${ff_convert:-"no"}
+ local pfl_upgrade=${pfl_upgrade:-"no"}
+ local project_quota_upgrade=${project_quota_upgrade:-"no"}
+ local dom_new_upgrade=${dom_new_upgrade:-"no"}
+ local flr_upgrade=${flr_upgrade:-"no"}
local shall_cleanup_mdt=false
local shall_cleanup_mdt1=false
local shall_cleanup_ost=false
+ local shall_cleanup_ost1=false
local shall_cleanup_lustre=false
local mdt2_is_available=false
+ local ost2_is_available=false
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
local tmp=$TMP/t32
local nrpcs_orig
local nrpcs
local list
- local fstype=$(facet_fstype $SINGLEMDS)
local mdt_dev=$tmp/mdt
local mdt2_dev=$tmp/mdt2
local ost_dev=$tmp/ost
+ local ost2_dev=$tmp/ost2
local stripe_index
local stripe_count
local dir
+ local pfl_file=$tmp/mnt/lustre/remote_dir/pfl_dir/pfl_file
+ local flr_file=$tmp/mnt/lustre/remote_dir/flr_dir/flr_file
+ local dom_file=$tmp/mnt/lustre/remote_dir/dom_dir/dom_file
+ local quota_dir=$tmp/mnt/lustre/remote_dir/project_quota_dir
combined_mgs_mds || stop_mgs || error "Unable to stop MGS"
trap 'trap - RETURN; t32_test_cleanup' RETURN
nid=$($r $LCTL list_nids | head -1)
mkdir -p $tmp/mnt/lustre || error "mkdir $tmp/mnt/lustre failed"
- $r mkdir -p $tmp/mnt/{mdt,mdt1,ost}
+ $r mkdir -p $tmp/mnt/{mdt,mdt1,ost,ost1}
$r tar xjvf $tarball -S -C $tmp || {
error_noexit "Unpacking the disk image tarball"
return 1
# - ost device img version < 2.3.64
# - ost server version >= 2.5
[ $(version_code $img_commit) -ge $(version_code 2.3.64) -o \
- $(lustre_version_code ost1) -lt $(version_code 2.5.0) ] &&
+ "$OST1_VERSION" -lt $(version_code 2.5.0) ] &&
ff_convert="no"
! $r test -f $mdt2_dev || mdt2_is_available=true
+ ! $r test -f $ost2_dev || ost2_is_available=true
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ echo "== fstype is zfs =="
# import pool first
local poolname
local poolname_list="t32fs-mdt1 t32fs-ost1"
mdt_dev=t32fs-mdt1/mdt1
ost_dev=t32fs-ost1/ost1
! $mdt2_is_available || mdt2_dev=t32fs-mdt2/mdt2
+ ! $ost2_is_available || ost2_dev=t32fs-ost2/ost2
wait_update_facet $SINGLEMDS "$ZPOOL list |
awk '/^t32fs-mdt1/ { print \\\$1 }'" "t32fs-mdt1" || {
error_noexit "import zfs pool failed"
return 1
}
+ elif [ "$project_upgrade" != "no" ]; then
+ echo "== project upgrade =="
+ ! $r tune2fs -O project $mdt_dev &&
+ error_noexit "enable project on mdt0 failed" &&
+ return 1
+ $mdt2_is_available && ! $r tune2fs "-O project" $mdt2_dev &&
+ error_noexit "enable project on mdt failed" &&
+ return 1
+ ! $r tune2fs -O project $ost_dev &&
+ error_noexit "enable project on ost failed" &&
+ return 1
+ $ost2_is_available && ! $r tune2fs -O project $ost2_dev &&
+ error_noexit "enable project on ost2 failed" &&
+ return 1
fi
$r $LCTL set_param debug="$PTLDEBUG"
fi
if [ "$writeconf" ]; then
+ echo "== writeconf mdt tunefs and quota =="
mopts=writeconf
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
$r $TUNEFS --quota $mdt_dev || {
$r losetup -a
error_noexit "Enable mdt quota feature"
return 1
}
+
+ if [ "$project_quota_upgrade" != "no" ]; then
+ echo "== enable mdt2 project quota =="
+ $r $TUNE2FS -O project $mdt_dev || {
+ $r losetup -a
+ error_noexit "tune2fs $mdt_dev failed"
+ return 1
+ }
+ fi
+
if $mdt2_is_available; then
$r $TUNEFS --quota $mdt2_dev || {
$r losetup -a
- error_noexit "Enable mdt quota feature"
+ error_noexit "Enable mdt2 quota feature"
return 1
}
+ if [ "$project_quota_upgrade" != "no" ]; then
+ echo "== enable mdt2 project quota =="
+ $r $TUNE2FS -O project $mdt2_dev || {
+ $r losetup -a
+ error_noexit \
+ "tune2fs $mdt2_dev failed"
+ return 1
+ }
+ fi
fi
fi
else
+ echo "== replace nids =="
if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
- [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
- { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
- "(Need MGS version at least 2.3.59)"; return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.3.59) ]] ||
+ skip "LU-2200: Cannot run over IB w/o lctl replace_nids "
+ "(Need MGS version at least 2.3.59)"
+ fi
- local osthost=$(facet_active_host ost1)
- local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
+ local osthost=$(facet_active_host ost1)
+ local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
- mopts=nosvc
- if [ $fstype == "ldiskfs" ]; then
- mopts="loop,$mopts"
- fi
- $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
- $r $LCTL replace_nids $fsname-OST0000 $ostnid
- $r $LCTL replace_nids $fsname-MDT0000 $nid
- $r $UMOUNT $tmp/mnt/mdt
+ mopts=nosvc
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
+ mopts="loop,$mopts"
+ fi
+ $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
+ $r $LCTL replace_nids $fsname-OST0000 $ostnid
+ if $ost2_is_available; then
+ $r $LCTL replace_nids $fsname-OST0001 $ostnid
fi
+ $r $LCTL replace_nids $fsname-MDT0000 $nid
+ if $mdt2_is_available; then
+ $r $LCTL replace_nids $fsname-MDT0001 $nid
+ fi
+ $r $UMOUNT $tmp/mnt/mdt
mopts=exclude=$fsname-OST0000
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
fi
shall_cleanup_mdt=true
if $mdt2_is_available; then
+ echo "== mdt2 available =="
mopts=mgsnode=$nid,$mopts
$r $MOUNT_CMD -o $mopts $mdt2_dev $tmp/mnt/mdt1 || {
$r losetup -a
error_noexit "Mounting the MDT"
return 1
}
+ shall_cleanup_mdt1=true
+ echo "== mount new MDT $mdt2_dev =="
- echo "mount new MDT....$mdt2_dev"
- $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
+ $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 || {
error_noexit "enable remote dir create failed"
+ return 1
+ }
- shall_cleanup_mdt1=true
elif [ "$dne_upgrade" != "no" ]; then
local fs2mdsdev=$(mdsdevname 1_2)
local fs2mdsvdev=$(mdsvdevname 1_2)
- echo "mkfs new MDT on ${fs2mdsdev}...."
- if [ $(facet_fstype mds1) == ldiskfs ]; then
+ echo "== mkfs new MDT on ${fs2mdsdev} =="
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
- add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
- $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
+ add $SINGLEMDS $(mds2failover_HOST="" \
+ mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
error_noexit "Mkfs new MDT failed"
return 1
}
- [[ $(facet_fstype mds1) != zfs ]] || import_zpool mds1
+ [[ "$mds1_FSTYPE" != zfs ]] || import_zpool mds1
$r $TUNEFS --dryrun $fs2mdsdev || {
error_noexit "tunefs.lustre before mounting the MDT"
return 1
}
- echo "mount new MDT....$fs2mdsdev"
+ echo "== mount new MDT....$fs2mdsdev =="
$r $MOUNT_CMD -o $mopts $fs2mdsdev $tmp/mnt/mdt1 || {
error_noexit "mount mdt1 failed"
return 1
error_noexit "tunefs.lustre before mounting the OST"
return 1
}
+
+ if $ost2_is_available; then
+ $r $TUNEFS --dryrun $ost2_dev || {
+ error_noexit "tunefs.lustre before mounting the OST"
+ return 1
+ }
+ fi
+
if [ "$writeconf" ]; then
+ echo "== writeconf and ost quota tunefs =="
mopts=mgsnode=$nid,$writeconf
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$ost1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
$r $TUNEFS --quota $ost_dev || {
$r losetup -a
error_noexit "Enable ost quota feature"
return 1
}
+
+ if [ "$project_quota_upgrade" != "no" ]; then
+ echo "== enable ost project quota =="
+ $r $TUNE2FS -O project $ost_dev || {
+ $r losetup -a
+ error_noexit "tune2fs $ost_dev failed"
+ return 1
+ }
+ fi
+
+ if $ost2_is_available; then
+ $r $TUNEFS --quota $ost2_dev || {
+ $r losetup -a
+ error_noexit "Enable ost2 quota feature"
+ return 1
+ }
+ if [ "$project_quota_upgrade" != "no" ]; then
+ echo "== enable ost2 project quota =="
+ $r $TUNE2FS -O project $ost2_dev || {
+ $r losetup -a
+ error_noexit \
+ "tune2fs $ost2_dev failed"
+ return 1
+ }
+ fi
+ fi
fi
else
mopts=mgsnode=$nid
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
fi
error_noexit "Mounting the OST"
return 1
}
+
+ if $ost2_is_available; then
+ $r $MOUNT_CMD -onomgs -o$mopts $ost2_dev $tmp/mnt/ost1 || {
+ error_noexit "Mounting the OST2"
+ return 1
+ }
+ shall_cleanup_ost1=true
+ fi
+
shall_cleanup_ost=true
uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0000.uuid) || {
return 1
fi
- if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ if $ost2_is_available; then
+ uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0001.uuid) ||{
+ error_noexit "Getting OST1 UUID"
+ return 1
+ }
+ if [ "$uuid" != $fsname-OST0001_UUID ]; then
+ error_noexit "Unexpected OST1 UUID: \"$uuid\""
+ return 1
+ fi
+ fi
+
+ if [[ $PERM_CMD =~ "set_param" ]]; then
+ echo "== perm cmd = '$PERM_CMD' =="
$r $PERM_CMD osc.$fsname-OST0000*.import=connection=$nid || {
error_noexit "Setting OST \"failover.node\""
return 1
return 1
}
else
+ echo "== perm cmd = '$PERM_CMD' =="
$r $PERM_CMD $fsname-OST0000.failover.node=$nid || {
error_noexit "Setting OST \"failover.node\""
return 1
return 1
}
- if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
+ if [ "$ff_convert" != "no" -a "$ost1_FSTYPE" == ldiskfs ]; then
+ echo "== ff convert ($ff_convert) =="
$r $LCTL lfsck_start -M $fsname-OST0000 || {
error_noexit "Start OI scrub on OST0"
return 1
}
fi
- if [ "$dne_upgrade" != "no" ]; then
- if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
+ echo "== dne upgrate ($dne_upgrade) or mdt2 available =="
+ if [[ $PERM_CMD =~ "set_param" ]]; then
$r $PERM_CMD mdc.$fsname-MDT0001*.import=connection=$nid || {
error_noexit "Setting MDT1 \"failover.node\""
return 1
fi
if [ "$writeconf" ]; then
+ echo "== writeconf and client mount =="
$MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
error_noexit "Mounting the client"
return 1
shall_cleanup_lustre=true
$r $LCTL set_param debug="$PTLDEBUG"
- # Leave re-enabling this to a separate patch for LU-11558
- # t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
- # error_noexit "verify quota failed"
- # return 1
- #}
+ t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
+ error_noexit "verify quota failed"
+ return 1
+ }
if $r test -f $tmp/list; then
+ echo "== list verification =="
#
# There is not a Test Framework API to copy files to or
# from a remote node.
return 1
fi
else
- echo "list verification skipped"
+ echo "== list verification skipped =="
fi
+ #non-dom upgrade to dom
if [ "$dom_upgrade" != "no" ]; then
- echo "Check DoM file can be created"
+ echo "== dom upgrade =="
$LFS setstripe -E 1M -L mdt -E EOF $tmp/mnt/lustre/dom || {
error_noexit "Verify DoM creation"
return 1
}
fi
+ #dom upgrade
+ #$LFS setstripe -E 1M -L mdt -E -1 -S 4M $dom_file
+ if [ "$dom_new_upgrade" != "no" ]; then
+ if ! $mdt2_is_available; then
+ dom_file=$tmp/mnt/lustre/dom_dir/dom_file
+ fi
+ echo "== check DoM file can be accessed =="
+ [ $($LFS getstripe -I1 -L $dom_file) == "mdt" ] || {
+ error_noexit "Verify a DoM file"
+ return 1
+ }
+ [ $(stat -c%s $dom_file) == $((2 * 1024 * 1024)) ] || {
+ error_noexit "DoM: bad size after write"
+ return 1
+ }
+ fi
+
+ if [ "$flr_upgrade" != "no" ]; then
+ if ! $mdt2_is_available; then
+ flr_file=$tmp/mnt/lustre/flr_dir/flr_file
+ fi
+ local mirror_count=$($LFS getstripe -N $flr_file)
+ echo "== check FLR file =="
+ [ $mirror_count == 2 ] || {
+ error_noexit "FLR mirror count wrong"
+ return 1
+ }
+ fi
+
if [ "$dne_upgrade" != "no" ]; then
+ echo "== dne upgrade striped_dir =="
$LFS mkdir -i 1 -c2 $tmp/mnt/lustre/striped_dir || {
error_noexit "set striped dir failed"
return 1
}
-
$LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
pushd $tmp/mnt/lustre
- tar -cf - . --exclude=./striped_dir \
- --exclude=./striped_dir_old \
- --exclude=./remote_dir |
+ tar -c --exclude=./striped_dir \
+ --exclude=./striped_dir_old \
+ --exclude=./remote_dir -f - .|
tar -xvf - -C striped_dir 1>/dev/null || {
error_noexit "cp to striped dir failed"
return 1
popd
fi
+ if [ "$pfl_upgrade" != "no" ]; then
+ local comp_size
+ local comp_cnt
+ local stripe_size
+ local stripe_cnt
+ local comp_id
+
+ echo "== check PFL file =="
+ if ! $mdt2_is_available; then
+ pfl_file=$tmp/mnt/lustre/pfl_dir/pfl_file
+ fi
+ comp_cnt=$($LFS getstripe --component-count $pfl_file)
+ [ $comp_cnt == 2 ] || {
+ error_noexit "wrong comp_cnt $comp_cnt"
+ return 1
+ }
+
+ comp_size=$($LFS getstripe -I1 -E $pfl_file)
+ [ $comp_size == 2097152 ] || {
+ error_noexit "wrong component size $comp_size"
+ return 1
+ }
+
+ comp_id=$($LFS getstripe -I1 -i $pfl_file)
+ [ $comp_id == 0 ] || {
+ error_noexit "wrong comp id $comp_id"
+ return 1
+ }
+
+ comp_id=$($LFS getstripe -I2 -i $pfl_file)
+ [ $comp_id -eq 1 ] || {
+ error_noexit "wrong comp id $comp_id"
+ return 1
+ }
+
+ stripe_size=$($LFS getstripe -I1 -S $pfl_file)
+ [ $stripe_size -eq 1048576 ] || {
+ error_noexit "wrong stripe size $stripe_size"
+ return 1
+ }
+
+ stripe_size=$($LFS getstripe -I2 -S $pfl_file)
+ [ $comp_size -eq 2097152 ] || {
+ error_noexit "wrong component size $comp_size"
+ return 1
+ }
+ fi
+
+ if [ "$project_quota_upgrade" != "no" ]; then
+ if ! $mdt2_is_available; then
+ quota_dir=$tmp/mnt/lustre/project_quota_dir
+ fi
+ local hardlimit
+
+ echo "== check Project Quota =="
+ hardlimit=$(getquota -p $T32_PRJID global 3 \
+ ${tmp}/mnt/lustre)
+ [ $hardlimit == $T32_PROLIMIT ] || {
+ error_noexit "wrong hardlimit $hardlimit"
+ return 1
+ }
+ fi
+
# If it is upgrade from DNE (2.5), then rename the remote dir,
# which is created in 2.5 to striped dir.
if $mdt2_is_available && [[ "$dne_upgrade" != "no" ]]; then
+ echo "== rename remote_dir =="
stripe_index=$($LFS getdirstripe -i \
$tmp/mnt/lustre/remote_dir)
# If it is upgraded from DNE (2.7), then move the striped dir
# which was created in 2.7 to the new striped dir.
if $mdt2_is_available && [[ "$dne_upgrade" != "no" ]] &&
+ echo "== rename striped dir =="
[[ -d $tmp/mnt/lustre/striped_dir_old ]]; then
stripe_count=$($LFS getdirstripe -c \
$tmp/mnt/lustre/striped_dir_old)
}
if $r test -f $tmp/sha1sums; then
+ echo "== checking sha1sums =="
# LU-2393 - do both sorts on same node to ensure locale
# is identical
$r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
- if [ "$dne_upgrade" != "no" ]; then
- pushd $tmp/mnt/lustre/striped_dir
+ if [[ "$dne_upgrade" != "no" ]]; then
+ if [[ -d $tmp/mnt/lustre/striped_dir/remote_dir ]]; then
+ pushd $tmp/mnt/lustre/striped_dir/remote_dir
+ else
+ pushd $tmp/mnt/lustre/striped_dir
+ fi
+ elif [[ "$pfl_upgrade" != "no" ]] ||
+ [[ "$flr_upgrade" != "no" ]] ||
+ [[ "$dom_new_upgrade" != "no" ]] ||
+ [[ "$project_quota_upgrade" != "no" ]] ||
+ [[ -d $tmp/mnt/lustre/remote_dir ]]; then
+ pushd $tmp/mnt/lustre/remote_dir
else
pushd $tmp/mnt/lustre
fi
find ! -path "*remote_dir*" ! -path "*striped_dir*" \
- ! -name .lustre -type f -exec sha1sum {} \; |
+ ! -name .lustre -type f -exec sha1sum {} \; |
sort -k 2 >$tmp/sha1sums || {
popd
error_noexit "sha1sum"
return 1
}
+ local save=$PWD
+
popd
if ! diff -ub $tmp/sha1sums.orig $tmp/sha1sums; then
+ echo "==** find $save files start **=="
+ find $save -type f -ls
+ echo "==** find $save files finish **=="
error_noexit "sha1sum verification failed"
return 1
fi
# if upgrade from DNE(2.7), then check striped directory
if $mdt2_is_available &&
[[ "$dne_upgrade" != "no" ]]; then
+ echo "== mdt2 upgrade sha1sum check =="
local new_dir="$tmp/mnt/lustre/striped_dir"
local striped_dir_old="$new_dir/striped_dir_old"
dir_list+=" $striped_dir_old"
for dir in $dir_list; do
+ echo "== dir = $dir =="
pushd $dir
- find ! -name .lustre -type f \
+ find ! -name .lustre -type f \
-exec sha1sum {} \; |
sort -k 2 >$tmp/sha1sums || {
+ ls -alR
popd
error_noexit "sha1sum"
return 1
popd
if ! diff -ub $tmp/sha1sums.orig \
$tmp/sha1sums; then
+ ls -alR $dir
error_noexit "sha1sum $dir" \
"failed"
return 1
done
fi
else
- echo "sha1sum verification skipped"
+ echo "== sha1sum verification skipped =="
+ fi
+
+ # PFL write test after sha1sum check
+ if [ "$pfl_upgrade" != "no" ]; then
+ local rw_len=$((3 * 1034 * 1024))
+
+ if ! $mdt2_is_available; then
+ pfl_file=$tmp/mnt/lustre/pfl_dir/pfl_file
+ fi
+ small_write $pfl_file $rw_len || {
+ error_noexit "PFL RW Failed"
+ return 1
+ }
fi
if [ "$dne_upgrade" != "no" ]; then
fi
# migrate files/dirs to remote MDT, then move them back
- if [ $(lustre_version_code mds1) -ge $(version_code 2.7.50) -a \
+ if [ "$MDS1_VERSION" -ge $(version_code 2.7.50) -a \
$dne_upgrade != "no" ]; then
$r $LCTL set_param -n \
mdt.${fsname}*.enable_remote_dir=1 2>/dev/null
- echo "test migration"
+ echo "== test migration =="
pushd $tmp/mnt/lustre
for dir in $(find ! -name .lustre ! -name . -type d); do
mdt_index=$($LFS getdirstripe -i $dir)
}
shall_cleanup_lustre=false
else
- if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
- $r $UMOUNT $tmp/mnt/mdt1 || {
- error_noexit "Unmounting the MDT2"
- return 1
- }
- if [[ $fstype == zfs ]]; then
- $r "$ZPOOL export t32fs-mdt2"
- fi
- shall_cleanup_mdt1=false
+ $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
+ error_noexit "Mounting the client"
+ return 1
+ }
+
+ if [ "$mds1_FSTYPE" == ldiskfs -a \
+ "$project_upgrade" != "no" ]; then
+ ! $LFS project -d -p 1 $tmp/mnt/lustre/* &&
+ error_noexit "set project failed" &&
+ return 1
+ fi
+
+ [[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) == 0 ]] ||
+ error "MDD orphan cleanup thread not quit"
+
+ umount $tmp/mnt/lustre || {
+ error_noexit "Unmounting the client"
+ return 1
+ }
+
+ if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
+ $r $UMOUNT $tmp/mnt/mdt1 || {
+ error_noexit "Unmounting the MDT2"
+ return 1
+ }
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ $r "$ZPOOL export t32fs-mdt2"
+ fi
+ shall_cleanup_mdt1=false
fi
$r $UMOUNT $tmp/mnt/mdt || {
error_noexit "Unmounting the MDT"
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
$r "$ZPOOL export t32fs-mdt1"
fi
shall_cleanup_mdt=false
error_noexit "Unmounting the OST"
return 1
}
- if [[ $fstype == zfs ]]; then
- $r "$ZPOOL export t32fs-ost1"
+ if $ost2_is_available; then
+ $r $UMOUNT $tmp/mnt/ost1 || {
+ error_noexit "Unmounting the OST1"
+ return 1
+ }
+ shall_cleanup_ost1=false
+ fi
+
+ if [[ $ost1_FSTYPE == zfs ]]; then
+ $r "$ZPOOL export t32fs-ost1"
+ if $ost2_is_available; then
+ $r "$ZPOOL export t32fs-ost2"
+ fi
fi
shall_cleanup_ost=false
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
local poolname=t32fs-mdt1
$r "modprobe zfs;
$ZPOOL list -H $poolname >/dev/null 2>&1 ||
}
mopts=exclude=$fsname-OST0000
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
$r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade"
t32_test $tarball || let "rc += $?"
done
return $rc
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade with writeconf"
t32_test $tarball writeconf || let "rc += $?"
done
return $rc
local tarball
local rc=0
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
t32_check
for tarball in $tarballs; do
- # Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
- echo $tarball | grep "1_8" && continue
- echo $tarball | grep "2_1" && continue
+ banner "testing $tarball upgrade with DNE"
load_modules
dne_upgrade=yes t32_test $tarball writeconf || rc=$?
done
t32_check
for tarball in $tarballs; do
- ff_convert=yes t32_test $tarball || rc=$?
+ banner "testing $tarball upgrade with ff and project upgrade"
+ project_upgrade="no"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.54) ]] &&
+ [[ "$tarball" =~ "disk2_4-ldiskfs" ]] &&
+ project_upgrade="yes"
+ project_upgrade=$project_upgrade ff_convert=yes t32_test \
+ $tarball || rc=$?
done
return $rc
}
-run_test 32d "convert ff test"
+run_test 32d "convert ff and project quota upgrade test"
test_32e() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.56) ]] ||
- { skip "Need MDS version at least 2.10.56"; return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
local tarballs
local tarball
t32_check
for tarball in $tarballs; do
- echo $tarball | grep "2_9" || continue
+ [[ "$tarball" =~ "2_9" ]] ||
+ { echo "skip $(basename $tarball)"; continue; }
#load_modules
+ banner "testing $tarball upgrade with DoM"
dom_upgrade=yes t32_test $tarball writeconf || let "rc += $?"
done
return $rc
}
run_test 32e "dom upgrade test"
+test_32f() {
+ [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
+
+ local tarballs
+ local tarball
+ local rc=0
+
+ t32_check
+ for tarball in $tarballs; do
+ [[ "$tarball" =~ "2_10" ]] ||
+ { echo "skip $(basename $tarball)"; continue; }
+ pfl_upgrade=yes project_quota_upgrade=yes \
+ t32_test $tarball writeconf || let "rc += $?"
+ done
+ return $rc
+}
+run_test 32f "pfl upgrade test"
+
+test_32g() {
+ [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
+
+ local tarballs
+ local tarball
+ local rc=0
+
+ t32_check
+ for tarball in $tarballs; do
+ [[ $tarball =~ "2_12" ]] ||
+ { echo "skip $(basename $tarball)"; continue; }
+ flr_upgrade=yes dom_new_upgrade=yes \
+ t32_test $tarball writeconf || let "rc += $?"
+ done
+ return $rc
+}
+run_test 32g "flr/dom upgrade test"
+
test_33a() { # bug 12333, was test_33
- local FSNAME2=test-123
+ local FSNAME2=test-$testnum
+
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
local mkfsoptions
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
local dev=${SINGLEMDS}_dev
local MDSDEV=${!dev}
+
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" &&
- return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
local fs2mdsvdev=$(mdsvdevname 1_2)
local fs2ostvdev=$(ostvdevname 1_2)
- if [ $(facet_fstype mds1) == ldiskfs ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
fi
--reformat $mgs_flag $mkfsoptions $fs2mdsdev $fs2mdsvdev ||
exit 10
add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
- --fsname=${FSNAME2} --index=8191 --reformat $fs2ostdev \
+ --fsname=${FSNAME2} --index=0x1fff --reformat $fs2ostdev \
$fs2ostvdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
echo "ok."
cp /etc/hosts $MOUNT2/ || error "copy /etc/hosts $MOUNT2/ failed"
- $GETSTRIPE $MOUNT2/hosts || error "$GETSTRIPE $MOUNT2/hosts failed"
+ $LFS getstripe $MOUNT2/hosts ||
+ error "$LFS getstripe $MOUNT2/hosts failed"
+
+ umount $MOUNT2
+ # test lctl del_ost on large index
+ do_facet mgs "$LCTL del_ost -t ${FSNAME2}-OST1fff" ||
+ error "del_ost failed with $?"
+ $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
+ echo "ok."
+ $LFS df | grep -q OST1fff && error "del_ost did not remove OST1fff!"
umount $MOUNT2
+
stop fs2ost -f
stop fs2mds -f
cleanup_nocli || error "cleanup_nocli failed with $?"
run_test 33a "Mount ost with a large index number"
test_33b() { # was test_34
- setup
+ setup
- do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
- # Drop lock cancelation reply during umount
+ do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
+ # Drop lock cancelation reply during umount
#define OBD_FAIL_LDLM_CANCEL_NET 0x304
do_facet client $LCTL set_param fail_loc=0x80000304
#lctl set_param debug=-1
run_test 33b "Drop cancel during umount"
test_34a() {
- setup
+ setup
do_facet client "sh runmultiop_bg_pause $DIR/file O_c"
manual_umount_client
rc=$?
run_test 35a "Reconnect to the last active server first"
test_35b() { # bug 18674
- remote_mds || { skip "local MDS" && return 0; }
+ remote_mds || skip "local MDS"
setup
debugsave
run_test 35b "Continue reconnection retries, if the active server is busy"
test_36() { # 12743
- [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs" && return
+ [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs"
[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] ||
- { skip "remote OST" && return 0; }
+ skip "remote OST"
local rc=0
local FSNAME2=test1234
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
local fs2ostvdev=$(ostvdevname 1_2)
local fs3ostvdev=$(ostvdevname 2_2)
+ load_modules
add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
--reformat $fs2mdsdev $fs2mdsvdev || exit 10
# XXX after we support non 4K disk blocksize in ldiskfs, specify a
DFAVAIL=$(echo $STRING | cut -d, -f3)
DFFREE=$(($DFTOTAL - $DFUSED))
- ALLOWANCE=$((64 * $OSTCOUNT))
-
- if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
- [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
- echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
- rc=1
- fi
- if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
- [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
- echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
- rc=2
- fi
- if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
- [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
- echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
- rc=3
- fi
+ ALLOWANCE=$((64 * $OSTCOUNT))
+
+ if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
+ [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
+ echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
+ rc=1
+ fi
+ if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
+ [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
+ echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
+ rc=2
+ fi
+ if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
+ [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
+ echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
+ rc=3
+ fi
$UMOUNT $MOUNT2
stop fs3ost -f || error "unable to stop OST3"
local opts=$MDS_MOUNT_OPTS
local rc=0
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
echo "MDS : $mdsdev"
if ! do_facet $SINGLEMDS test -b $mdsdev; then
opts=$(csa_add "$opts" -o loop)
fi
+
+ load_modules
mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
$mdsdev_sym $mntpt 2>&1)
rc=${PIPESTATUS[0]}
run_test 37 "verify set tunables works for symlink device"
test_38() { # bug 14222
- local fstype=$(facet_fstype $SINGLEMDS)
local mntpt=$(facet_mntpt $SINGLEMDS)
setup
local COUNT=10
local SRC="/etc /bin"
local FILES=$(find $SRC -type f -mtime +1 | head -n $COUNT)
+
log "copying $(echo $FILES | wc -w) files to $DIR/$tdir"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
tar cf - $FILES | tar xf - -C $DIR/$tdir ||
run_test 40 "race during service thread startup"
test_41a() { #bug 14134
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
skip "Loop devices does not work with nosvc option"
- return
fi
- combined_mgs_mds ||
- { skip "needs combined MGT and MDT device" && return 0; }
+ combined_mgs_mds || skip "needs combined MGT and MDT device"
start_mdt 1 -o nosvc -n
if [ $MDSCOUNT -ge 2 ]; then
run_test 41a "mount mds with --nosvc and --nomgs"
test_41b() {
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
skip "Loop devices does not work with nosvc option"
- return
fi
- ! combined_mgs_mds && skip "needs combined mgs device" && return 0
+ ! combined_mgs_mds && skip "needs combined mgs device"
stopall
reformat
run_test 41b "mount mds with --nosvc and --nomgs on first mount"
test_41c() {
- local server_version=$(lustre_version_code $SINGLEMDS)
local oss_list=$(comma_list $(osts_nodes))
- [[ $server_version -ge $(version_code 2.6.52) ]] ||
- [[ $server_version -ge $(version_code 2.5.26) &&
- $server_version -lt $(version_code 2.5.50) ]] ||
- [[ $server_version -ge $(version_code 2.5.4) &&
- $server_version -lt $(version_code 2.5.11) ]] ||
- { skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.52) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.26) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.4) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.11) ]] ||
+ skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"
# ensure mds1 ost1 have been created even if running sub-test standalone
cleanup
local mds1dev=$(mdsdevname 1)
local mds1mnt=$(facet_mntpt mds1)
- local mds1fstype=$(facet_fstype mds1)
local mds1opts=$MDS_MOUNT_OPTS
- if [ $mds1fstype == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet mds1 test -b $mds1dev; then
mds1opts=$(csa_add "$mds1opts" -o loop)
fi
- if [[ $mds1fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
import_zpool mds1 || return ${PIPESTATUS[0]}
fi
local rc2=$?
wait $pid
local rc=$?
+
do_facet mds1 "$LCTL set_param fail_loc=0x0"
if [ $rc -eq 0 ] && [ $rc2 -ne 0 ]; then
echo "1st MDT start succeed"
local ost1dev=$(ostdevname 1)
local ost1mnt=$(facet_mntpt ost1)
- local ost1fstype=$(facet_fstype ost1)
local ost1opts=$OST_MOUNT_OPTS
- if [ $ost1fstype == ldiskfs ] &&
+ if [ "$ost1_FSTYPE" == ldiskfs ] &&
! do_facet ost1 test -b $ost1dev; then
ost1opts=$(csa_add "$ost1opts" -o loop)
fi
- if [[ $ost1fstype == zfs ]]; then
+ if [[ "$ost1_FSTYPE" == zfs ]]; then
import_zpool ost1 || return ${PIPESTATUS[0]}
fi
run_test 42 "allow client/server mount/unmount with invalid config param"
test_43a() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.5.58) ]] ||
- { skip "Need MDS version at least 2.5.58" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.5.58) ]] ||
+ skip "Need MDS version at least 2.5.58"
[ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
ID1=${ID1:-501}
USER1=$(getent passwd | grep :$ID1:$ID1: | cut -d: -f1)
- [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1" &&
- return
+ [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1"
setup
chmod ugo+x $DIR || error "chmod 0 failed"
echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
- mkdir $DIR/$tdir-rootdir || error "mkdir failed"
+ mkdir_on_mdt0 $DIR/$tdir-rootdir || error "mkdir failed"
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
run_test 43a "check root_squash and nosquash_nids"
test_43b() { # LU-5690
- [[ $(lustre_version_code mgs) -ge $(version_code 2.7.62) ]] ||
- { skip "Need MGS version 2.7.62+"; return; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.7.62) ]] ||
+ skip "Need MGS version 2.7.62+"
if [[ -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
check_mount || error "check_mount"
UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
STATS_FOUND=no
- UUIDS=$(do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
- for VAL in $UUIDS; do
- NID=$(echo $VAL | cut -d= -f1)
- CLUUID=$(echo $VAL | cut -d= -f2)
- [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
- done
+ UUIDS=$(do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
+ for VAL in $UUIDS; do
+ NID=$(echo $VAL | cut -d= -f1)
+ CLUUID=$(echo $VAL | cut -d= -f2)
+ [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
+ done
[ "$STATS_FOUND" = "no" ] && error "stats not found for client"
cleanup || error "cleanup failed with $?"
}
start_mds || error "unable to start MDS"
#first client should see only one ost
start_ost || error "Unable to start OST1"
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
#start_client
mount_client $MOUNT || error "mount_client $MOUNT failed"
trap "cleanup_46a $OSTCOUNT" EXIT ERR
#second client see all ost's
mount_client $MOUNT2 || error "mount_client failed"
- $SETSTRIPE -c -1 $MOUNT2 || error "$SETSTRIPE -c -1 $MOUNT2 failed"
- $GETSTRIPE $MOUNT2 || error "$GETSTRIPE $MOUNT2 failed"
+ $LFS setstripe -c -1 $MOUNT2 ||
+ error "$LFS setstripe -c -1 $MOUNT2 failed"
+ $LFS getstripe $MOUNT2 || error "$LFS getstripe $MOUNT2 failed"
echo "ok" > $MOUNT2/widestripe
- $GETSTRIPE $MOUNT2/widestripe ||
- error "$GETSTRIPE $MOUNT2/widestripe failed"
+ $LFS getstripe $MOUNT2/widestripe ||
+ error "$LFS getstripe $MOUNT2/widestripe failed"
# fill acl buffer for avoid expand lsm to them
awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd |
while read acl; do
check_mount || error "check_mount failed"
$LCTL set_param ldlm.namespaces.$FSNAME-*-*-*.lru_size=100
- local lru_size=[]
- local count=0
- for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
- if echo $ns | grep "MDT[[:digit:]]*"; then
- continue
- fi
- lrs=$(echo $ns | sed 's/.*lru_size=//')
- lru_size[count]=$lrs
- let count=count+1
- done
+ local lru_size=[]
+ local count=0
+ for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
+ if echo $ns | grep "MDT[[:digit:]]*"; then
+ continue
+ fi
+ lrs=$(echo $ns | sed 's/.*lru_size=//')
+ lru_size[count]=$lrs
+ let count=count+1
+ done
facet_failover ost1
facet_failover $SINGLEMDS
client_up || error "client_up failed"
- count=0
- for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
- if echo $ns | grep "MDT[[:digit:]]*"; then
- continue
- fi
- lrs=$(echo $ns | sed 's/.*lru_size=//')
- if ! test "$lrs" -eq "${lru_size[count]}"; then
- n=$(echo $ns | sed -e 's/ldlm.namespaces.//' -e 's/.lru_size=.*//')
- error "$n has lost lru_size: $lrs vs. ${lru_size[count]}"
- fi
- let count=count+1
- done
+ count=0
+ for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
+ if echo $ns | grep "MDT[[:digit:]]*"; then
+ continue
+ fi
+ lrs=$(echo $ns | sed 's/.*lru_size=//')
+ if ! test "$lrs" -eq "${lru_size[count]}"; then
+ n=$(echo $ns | sed -e 's/ldlm.namespaces.//' -e 's/.lru_size=.*//')
+ error "$n has lost lru_size: $lrs vs. ${lru_size[count]}"
+ fi
+ let count=count+1
+ done
cleanup || error "cleanup failed with $?"
}
setup_noconfig
check_mount || error "check_mount failed"
- $SETSTRIPE -c -1 $MOUNT || error "$SETSTRIPE -c -1 $MOUNT failed"
- $GETSTRIPE $MOUNT || error "$GETSTRIPE $MOUNT failed"
+ $LFS setstripe -c -1 $MOUNT ||
+ error "$LFS setstripe -c -1 $MOUNT failed"
+ $LFS getstripe $MOUNT || error "$LFS getstripe $MOUNT failed"
echo "ok" > $MOUNT/widestripe
- $GETSTRIPE $MOUNT/widestripe ||
- error "$GETSTRIPE $MOUNT/widestripe failed"
+ $LFS getstripe $MOUNT/widestripe ||
+ error "$LFS getstripe $MOUNT/widestripe failed"
# In the future, we may introduce more EAs, such as selinux, enlarged
# LOV EA, and so on. These EA will use some EA space that is shared by
# ACL entries. So here we only check some reasonable ACL entries count,
# instead of the max number that is calculated from the max_ea_size.
- if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.57) ];
- then
+ if [ "$MDS1_VERSION" -lt $(version_code 2.8.57) ]; then
count=28 # hard coded of RPC protocol
- elif [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
- count=4000 # max_num 4091 max_ea_size = 32768
- elif ! large_xattr_enabled; then
- count=450 # max_num 497 max_ea_size = 4012
+ elif large_xattr_enabled; then
+ count=4500 # max_num 8187 max_ea_size = 65452
+ # not create too many (4500) to save test time
else
- count=4500 # max_num 8187 max_ea_size = 1048492
- # not create too much (>5000) to save test time
+ count=450 # max_num 497 max_ea_size = 4012
fi
echo "It is expected to hold at least $count ACL entries"
cancel_lru_locks mdc
stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
local r_count=$(getfacl $MOUNT/widestripe | grep "user:" | wc -l)
+
count=$((count + 1)) # for the entry "user::rw-"
[ $count -eq $r_count ] ||
lazystatfs() {
# wait long enough to exceed OBD_STATFS_CACHE_SECONDS = 1
sleep 2
- # Test both statfs and lfs df and fail if either one fails
+ # Test both statfs and lfs df and fail if either one fails
multiop_bg_pause $1 f_
RC=$?
PID=$!
# Wait for client to detect down OST
stop_ost || error "Unable to stop OST1"
- wait_osc_import_state mds ost DISCONN
+ wait_osc_import_state mds ost DISCONN
lazystatfs $MOUNT || error "lazystatfs failed with one down server"
umount_client $MOUNT || error "Unable to unmount client"
start_mds || error "Unable to start mds"
#first client should see only one ost
start_ost || error "Unable to start OST1"
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
- start_ost2 || error "Unable to start OST2"
- wait_osc_import_state mds ost2 FULL
+ start_ost2 || error "Unable to start OST2"
+ wait_osc_import_state mds ost2 FULL
# Wait for client to detect down OST
stop_ost2 || error "Unable to stop OST2"
run_test 50f "normal statfs one server in down"
test_50g() {
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs"
setup
start_ost2 || error "Unable to start OST2"
- wait_osc_import_state mds ost2 FULL
+ wait_osc_import_state mds ost2 FULL
wait_osc_import_ready client ost2
if [[ $PERM_CMD == *"set_param -P"* ]]; then
local PARAM="${FSNAME}-OST0001.osc.active"
fi
- $SETSTRIPE -c -1 $DIR/$tfile || error "$SETSTRIPE failed"
+ $LFS setstripe -c -1 $DIR/$tfile || error "$LFS setstripe failed"
do_facet mgs $PERM_CMD $PARAM=0 || error "Unable to deactivate OST"
umount_client $MOUNT || error "Unable to unmount client"
# LU-642
test_50h() {
# prepare MDT/OST, make OSC inactive for OST1
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs"
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --param osc.active=0 `ostdevname 1`" ||
error "tunefs OST1 failed"
start_mds || error "Unable to start MDT"
"${FSNAME}-OST0000.osc.active" 1
mkdir $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
- $SETSTRIPE -c -1 -i 0 $DIR/$tdir/2 ||
- error "$SETSTRIPE $DIR/$tdir/2 failed"
+ $LFS setstripe -c -1 -i 0 $DIR/$tdir/2 ||
+ error "$LFS setstripe $DIR/$tdir/2 failed"
sleep 1 && echo "create a file after OST1 is activated"
# doing some io, shouldn't crash
dd if=/dev/zero of=$DIR/$tdir/2/$tfile-io bs=1M count=10
test_50i() {
# prepare MDT/OST, make OSC inactive for OST1
- [ "$MDSCOUNT" -lt "2" ] && skip_env "needs >= 2 MDTs" && return
+ [ "$MDSCOUNT" -lt "2" ] && skip "needs >= 2 MDTs"
load_modules
[ $(facet_fstype mds2) == zfs ] && import_zpool mds2
start_ost2 || error "Unable to start OST2"
mount_client $MOUNT || error "client start failed"
- mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
if [[ $PERM_CMD == *"set_param -P"* ]]; then
$PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&
"${FSNAME}-MDT0001.mdc.active" 1
wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds2 FULL
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.60) ]
+ if [ "$MDS1_VERSION" -ge $(version_code 2.7.60) ]
then
wait_dne_interconnect
fi
check_mount || error "check_mount failed"
mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
- $SETSTRIPE -c -1 $MOUNT/$tdir ||
- error "$SETSTRIPE -c -1 $MOUNT/$tdir failed"
+ $LFS setstripe -c -1 $MOUNT/$tdir ||
+ error "$LFS setstripe -c -1 $MOUNT/$tdir failed"
#define OBD_FAIL_MDS_REINT_DELAY 0x142
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x142"
touch $MOUNT/$tdir/$tfile &
do_node $node mkdir -p $dest
[ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
- do_node $node 'tar cf - '$@' | tar xf - -C '$dest';
+ do_node $node 'tar cf - '$*' | tar xf - -C '$dest';
[ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
[ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
- do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$*' > '$xattrs
[ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
}
do_node $node mkdir -p $backup2
[ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
- do_node $node 'tar cf - '$@' | tar xf - -C '$backup2';
+ do_node $node 'tar cf - '$*' | tar xf - -C '$backup2';
[ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
[ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
[ $? -eq 0 ] || { error "contents differ"; return 3; }
local xattrs2=${TMP}/xattrs2
- do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$*' > '$xattrs2
[ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
do_node $node "diff $xattrs $xattrs2"
}
test_52() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
start_mds || error "Unable to start MDS"
error "Unable to create temporary file"
sleep 1
- $SETSTRIPE -c -1 -S 1M $DIR/$tdir || error "$SETSTRIPE failed"
+ $LFS setstripe -c -1 -S 1M $DIR/$tdir || error "$LFS setstripe failed"
for (( i=0; i < nrfiles; i++ )); do
multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c ||
if ! do_node $ost1node test -b $ost1_dev; then
loop="-o loop"
fi
- do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
+ do_node $ost1node mount -t "$ost1_FSTYPE" $loop $ost1_dev \
$ost1mnt ||
error "Unable to mount ost1 as ldiskfs"
# Arguments: service name (OST or MDT), facet (e.g., ost1, $SINGLEMDS), and a
# parameter pattern prefix like 'ost.*.ost'.
thread_sanity() {
- local modname=$1
- local facet=$2
- local parampat=$3
- local opts=$4
+ local modname=$1
+ local facet=$2
+ local parampat=$3
+ local opts=$4
local basethr=$5
- local tmin
- local tmin2
- local tmax
- local tmax2
- local tstarted
- local paramp
- local msg="Insane $modname thread counts"
+ local tmin
+ local tmin2
+ local tmax
+ local tmax2
+ local tstarted
+ local paramp
+ local msg="Insane $modname thread counts"
local ncpts=$(check_cpt_number $facet)
local nthrs
- shift 4
+ shift 4
- check_mount || return 41
+ check_mount || return 41
- # We need to expand $parampat, but it may match multiple parameters, so
- # we'll pick the first one
- if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
- error "Couldn't expand ${parampat}.threads_min parameter name"
- return 22
- fi
+ # We need to expand $parampat, but it may match multiple parameters, so
+ # we'll pick the first one
+ if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
+ error "Couldn't expand ${parampat}.threads_min parameter name"
+ return 22
+ fi
# Remove the .threads_min part
paramp=${paramp%.threads_min}
fi
[ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
- skip_env "module parameter forced $facet thread count" &&
- tmin=3 && tmax=$((3 * tmax))
+ skip_env "module parameter forced $facet thread count"
# Check that we can change min/max
do_facet $facet "$LCTL set_param \
cleanup
local oldvalue
local newvalue="${opts}=$(expr $basethr \* $ncpts)"
+
setmodopts -a $modname "$newvalue" oldvalue
setup
run_test 53b "check MDS thread count params"
test_54a() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p ||
run_test 54a "test llverdev and partial verify of device"
test_54b() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
setup
lov_objid_size()
{
local max_ost_index=$1
+
echo -n $(((max_ost_index + 1) * 8))
}
test_55() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local mdsdev=$(mdsdevname 1)
stopall
done
- reformat
+ reformat_and_config
}
run_test 55 "check lov_objid size"
test_56a() {
- local server_version=$(lustre_version_code $SINGLEMDS)
local mds_journal_size_orig=$MDSJOURNALSIZE
local n
echo ok
$LFS osts
- if [[ $server_version -ge $(version_code 2.6.54) ]] ||
- [[ $server_version -ge $(version_code 2.5.4) &&
- $server_version -lt $(version_code 2.5.11) ]]; then
+ # test instantiating PFL components with sparse index LU-15513
+ mkdir -p $MOUNT/$tdir
+ $LFS setstripe -E 4M -c 1 -E 1G -c 4 -S4M -E eof -c -1 $MOUNT/$tdir
+ dd if=/dev/zero of=$MOUNT/$tdir/$tfile bs=4K count=1 seek=10k ||
+ error "dd to second component failed"
+
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.4) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.11) ]]; then
wait_osc_import_state mds ost1 FULL
wait_osc_import_state mds ost2 FULL
- $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
+ $LFS setstripe --stripe-count=-1 $DIR/$tfile ||
error "Unable to setstripe $DIR/$tfile"
n=$($LFS getstripe --stripe-count $DIR/$tfile)
[ "$n" -eq 2 ] || error "Stripe count not two: $n"
stopall
MDSJOURNALSIZE=$mds_journal_size_orig
- reformat
+ reformat_and_config
}
run_test 56a "check big OST indexes and out-of-index-order start"
stop mds2
stop mds3
stopall
- reformat
+ reformat_and_config
}
test_56b() {
- [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
trap cleanup_56b EXIT RETURN ERR
stopall
local NID=$(do_facet ost1 "$LCTL get_param nis" |
tail -1 | awk '{print $1}')
writeconf_or_reformat
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" ||
error "tunefs failed"
start_mgsmds
start_ost && error "OST registration from failnode should fail"
- reformat
+ cleanup
}
run_test 57a "initial registration from failnode should fail (should return errs)"
local NID=$(do_facet ost1 "$LCTL get_param nis" |
tail -1 | awk '{print $1}')
writeconf_or_reformat
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" ||
error "tunefs failed"
start_mgsmds
start_ost || error "OST registration from servicenode should not fail"
- reformat
+ cleanup
}
run_test 57b "initial registration from servicenode should not fail"
count_osts() {
- do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
+ do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
}
test_58() { # bug 22658
# restart MDS with missing llog files
start_mds || error "unable to start MDS"
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0"
- reformat
+ cleanup
}
run_test 58 "missing llog files must not prevent MDT from mounting"
}
run_test 59 "writeconf mount option"
-test_60() { # LU-471
- local num
-
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+test_60a() { # LU-471
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
+ local num
+
for num in $(seq $MDSCOUNT); do
add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
--mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' \
echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
# we set stride extended options
echo $dump | grep stride > /dev/null || error "stride is not set"
- reformat
+ stop_mds
+ reformat_and_config
+}
+run_test 60a "check mkfs.lustre --mkfsoptions -E -O options setting"
+
+test_60b() {
+ [[ "$mds1_FSTYPE" == ldiskfs ]] || skip "ldiskfs only test"
+
+ local features=$(do_facet $SINGLEMDS $DUMPE2FS $(mdsdevname 1) |
+ grep features)
+ [ ${PIPESTATUS[0]} -eq 0 ] || error "$DUMPE2FS $(mdsdevname 1) failed"
+
+ echo $features
+ # ea_inode feature should be enabled by default for MDTs
+ [[ "$features" =~ "ea_inode" ]] || error "ea_inode is not set"
+ # large_dir feature should be enabled by default for MDTs
+ [[ "$features" =~ "large_dir" ]] || error "large_dir is not set"
}
-run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
+run_test 60b "check mkfs.lustre MDT default features"
-test_61() { # LU-80
- local lxattr=false
+test_61a() { # LU-80
+ local lxattr=$(large_xattr_enabled)
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
- { skip "Need MDS version at least 2.1.53"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.1.53) ] ||
+ skip "Need MDS version at least 2.1.53"
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! large_xattr_enabled; then
lxattr=true
done
fi
- combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
- setup_noconfig || error "setting up the filesystem failed"
+ setup || error "setting up the filesystem failed"
client_up || error "starting client failed"
local file=$DIR/$tfile
local small_value="bar"
local name="trusted.big"
- log "save large xattr $name on $file"
+ log "save large xattr of $(max_xattr_size) bytes on $name on $file"
setfattr -n $name -v $large_value $file ||
error "saving $name on $file failed"
log "remove large xattr $name from $file"
setfattr -x $name $file || error "removing $name from $file failed"
- if $lxattr; then
+ if $lxattr && [ "$mds1_FSTYPE" == ldiskfs ]; then
stopall || error "stopping for e2fsck run"
for num in $(seq $MDSCOUNT); do
run_e2fsck $(facet_active_host mds$num) \
# need to delete this file to avoid problems in other tests
rm -f $file
- stopall || error "stopping systems failed"
+ cleanup || error "stopping systems failed"
+}
+run_test 61a "large xattr"
+
+test_61b() { # LU-80
+ local lxattr=$(large_xattr_enabled)
+
+ [ "$MDS1_VERSION" -ge $(version_code 2.1.53) ] ||
+ skip "Need MDS version at least 2.1.53"
+
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
+ skip "ldiskfs specific bug"
+ fi
+
+ if ! large_xattr_enabled; then
+ lxattr=true
+
+ for num in $(seq $MDSCOUNT); do
+ do_facet mds${num} $TUNE2FS -O ea_inode \
+ $(mdsdevname $num) ||
+ error "tune2fs on mds $num failed"
+ done
+ fi
+
+ setup || error "setting up the filesystem failed"
+ client_up || error "starting client failed"
+
+ local _file=$MOUNT/panda
+ local large_value="$(generate_string $(max_xattr_size))"
+ local name="trusted.big"
+
+ touch ${_file} || error "touch ${_file} failed"
+ setfattr -n $name -v $large_value ${_file} ||
+ error "saving $name on $file failed"
+
+ MDT_DEV="${FSNAME}-MDT0000"
+ MDT_DEVNAME=$(mdsdevname ${SINGLEMDS//mds/})
+
+ stopall || error "stopping for e2fsck run"
+
+
+ ino=$(do_facet $SINGLEMDS "$DEBUGFS -R 'stat /ROOT/panda' \
+ ${MDT_DEVNAME} | grep trusted.big")
+ ino=$(echo "${ino}" | awk '{print $2;}')
+ echo "large ea "${ino}
+
+ do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"ln $ino /lost+found\\\" \
+ ${MDT_DEVNAME}"
+
+ setup_noconfig || error "remounting the filesystem failed"
+
+ do_facet $SINGLEMDS $LCTL lfsck_start -M ${MDT_DEV} -t namespace || {
+ error "can't start lfsck namespace"
+ }
+
+ sleep 5
+ wait_update_facet $SINGLEMDS "$LCTL get_param -n \
+ mdd.${MDT_DEV}.lfsck_namespace |
+ awk '/^status/ { print \\\$2 }'" "completed" 32 || {
+ error "(2) unexpected status"
+ }
+
+ stopall || error "stopping for e2fsck run"
+ for num in $(seq $MDSCOUNT); do
+ run_e2fsck $(facet_active_host mds$num) \
+ $(mdsdevname $num) "-y" ||
+ error "e2fsck MDT$num failed"
+ done
+ setup_noconfig || error "remounting the filesystem failed"
+
+ # need to delete this file to avoid problems in other tests
+ rm -f $file
+ cleanup || error "stopping systems failed"
}
-run_test 61 "large xattr"
+run_test 61b "large xattr"
test_62() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
+ [[ "$MDS1_VERSION" -ge $(version_code 2.2.51) ]] ||
+ skip "Need MDS version at least 2.2.51"
# MRP-118
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
- { skip "Need MDS version at least 2.2.51"; return 0; }
-
echo "disable journal for mds"
do_facet mds1 $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
start_mds && error "MDT start should fail"
run_test 62 "start with disabled journal"
test_63() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ldiskfs
awk '/ldiskfs_inode_cache/ { print $5 / $6 }')
if [ -z "$inode_slab" ]; then
skip "ldiskfs module has not been loaded"
- return
+ fi
+
+ if grep -q "CONFIG_DEBUG_LOCK_ALLOC=y" /boot/config-$(uname -r); then
+ skip "test is not compatible with CONFIG_DEBUG_LOCK_ALLOC=y"
fi
echo "$inode_slab ldiskfs inodes per page"
# If kmalloc-128 is also 1 per page - this is a debug kernel
# and so this is not an error.
local kmalloc128=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
- awk '/^(kmalloc|size)-128 / { print $5 / $6 }')
+ awk '/^(dma-kmalloc|size)-128 / { print $5 / $6 }')
# 32 128-byte chunks in 4k
[ "${kmalloc128%.*}" -lt "32" ] ||
error "ldiskfs inode too big, only $inode_slab objs/page, " \
test_65() { # LU-2237
# Currently, the test is only valid for ldiskfs backend
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
+ skip "ldiskfs only test"
local devname=$(mdsdevname ${SINGLEMDS//mds/})
local brpt=$(facet_mntpt brpt)
# remove the "last_rcvd" file
do_facet $SINGLEMDS "mkdir -p $brpt"
do_facet $SINGLEMDS \
- "mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
+ "mount -t $mds1_FSTYPE $opts $devname $brpt"
do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
do_facet $SINGLEMDS "$UMOUNT $brpt"
run_test 65 "re-create the lost last_rcvd file when server mount"
test_66() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
- { skip "Need MGS version at least 2.3.59"; return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.3.59) ]] ||
+ skip "Need MGS version at least 2.3.59"
setup
local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
check_mount || error "error after nid replace"
cleanup || error "cleanup failed"
- reformat
+ reformat_and_config
}
run_test 66 "replace nids"
local START
local END
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
- { skip "Need MDS version at least 2.4.53"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.4.53) ] ||
+ skip "Need MDS version at least 2.4.53"
umount_client $MOUNT || error "umount client failed"
- if ! combined_mgs_mds; then
- start_mgs || error "start mgs failed"
- fi
-
- start_mdt 1 || error "MDT start failed"
- start_ost || error "Unable to start OST1"
+ start_mgsmds
+ start_ost
# START-END - the sequences we'll be reserving
START=$(do_facet $SINGLEMDS \
# just "precreate" the missing objects. In the past it might try to recreate
# millions of objects after an OST was reformatted
test_69() {
- local server_version=$(lustre_version_code $SINGLEMDS)
+ [[ "$MDS1_VERSION" -lt $(version_code 2.4.2) ]] &&
+ skip "Need MDS version at least 2.4.2"
- [[ $server_version -lt $(version_code 2.4.2) ]] &&
- skip "Need MDS version at least 2.4.2" && return
-
- [[ $server_version -ge $(version_code 2.4.50) ]] &&
- [[ $server_version -lt $(version_code 2.5.0) ]] &&
- skip "Need MDS version at least 2.5.0" && return
+ [[ "$MDS1_VERSION" -ge $(version_code 2.4.50) ]] &&
+ [[ "$MDS1_VERSION" -lt $(version_code 2.5.0) ]] &&
+ skip "Need MDS version at least 2.5.0"
setup
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
local OSTNAME=$(ostname_from_index 0)
local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
local last_id=$(do_facet mds1 $LCTL get_param -n \
- osc.$mdtosc_proc1.prealloc_last_id)
+ osp.$mdtosc_proc1.prealloc_last_id)
# Want to have OST LAST_ID over 5 * OST_MAX_PRECREATE to
# verify that the LAST_ID recovery is working properly. If
if [ $num_create -gt 0 ]; then
# Check the number of inodes available on OST0
local files=0
- local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
- log "On OST0, $ifree inodes available. Want $num_create."
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
- $SETSTRIPE -i 0 $DIR/$tdir ||
- error "$SETSTRIPE -i 0 $DIR/$tdir failed"
+ $LFS setstripe -i 0 $DIR/$tdir ||
+ error "$LFS setstripe -i 0 $DIR/$tdir failed"
if [ $ifree -lt 10000 ]; then
files=$(( ifree - 50 ))
else
start_ost || error "OST0 restart failure"
wait_osc_import_state mds ost FULL
+ sleep $((TIMEOUT/2)) #object recreation requires some time
mount_client $MOUNT || error "mount client failed"
touch $DIR/$tdir/$tfile-last || error "create file after reformat"
- local idx=$($GETSTRIPE -i $DIR/$tdir/$tfile-last)
+ local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
- local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
- log "On OST0, $iused used inodes"
- [ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
+ local iused=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $3 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $iused used inodes rc=$?"
+ [ $iused -ge $((ost_max_pre + 1000)) ] &&
error "OST replacement created too many inodes; $iused"
cleanup || error "cleanup failed with $?"
}
run_test 69 "replace an OST with the same index"
test_70a() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
cleanup || error "cleanup failed with $?"
run_test 70a "start MDT0, then OST, then MDT1"
test_70b() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 70b "start OST, MDT1, MDT0"
test_70c() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_mds || error "MDS start fail"
run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
test_70d() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_mds || error "MDS start fail"
run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
test_70e() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.62) ] ||
- { skip "Need MDS version at least 2.7.62"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.7.62) ] ||
+ skip "Need MDS version at least 2.7.62"
- cleanup || error "cleanup failed with $?"
+ reformat || error "reformat failed with $?"
+
+ load_modules
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
local opts_mds="$(mkfs_opts mds1 $mdsdev) --reformat $mdsdev $mdsvdev"
local opts_ost="$(mkfs_opts ost1 $ostdev) --reformat $ostdev $ostvdev"
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
add mds1 $opts_mds || error "add mds1 failed"
start_mdt 1 || error "start mdt1 failed"
add ost1 $opts_ost || error "add ost1 failed"
run_test 70e "Sync-on-Cancel will be enabled by default on DNE"
test_71a() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
+ skip "needs separate MGS/MDT"
fi
local MDTIDX=1
run_test 71a "start MDT0 OST0, MDT1, OST1"
test_71b() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
+ skip "needs separate MGS/MDT"
fi
local MDTIDX=1
run_test 71b "start MDT1, OST0, MDT0, OST1"
test_71c() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71c "start OST0, OST1, MDT1, MDT0"
test_71d() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71d "start OST0, MDT1, MDT0, OST1"
test_71e() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71e "start OST0, MDT1, OST1, MDT0"
test_72() { #LU-2634
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
+ skip "ldiskfs only test"
+
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
local cmd="$E2FSCK -fnvd $mdsdev"
local fn=3
local add_options
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
+ cleanup
+ load_modules
if combined_mgs_mds; then
add_options='--reformat'
run_test 72 "test fast symlink with extents flag enabled"
test_73() { #LU-3006
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
error "1st tunefs failed"
start_mgsmds || error "start mds failed"
$LCTL get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
umount_client $MOUNT || error "umount client failed"
- stopall
- reformat
+ stop_ost
+ stop_mds
}
run_test 73 "failnode to update from mountdata properly"
test_75() { # LU-2374
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
- skip "Need MDS version at least 2.4.1" && return
+ [[ "$MDS1_VERSION" -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1"
local index=0
local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
- --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ --replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
+ --replace --reformat $(ostdevname 1) $(ostvdevname 1)"
#check with default parameters
add mds1 $opts_mds || error "add mds1 failed for default params"
add mds1 $opts_mds || error "add mds1 failed for new params"
add ost1 $opts_ost || error "add ost1 failed for new params"
- if ! combined_mgs_mds; then
- stop_mgs || error "stop mgs failed"
- fi
- reformat
+
+ reformat_and_config
return 0
}
run_test 75 "The order of --index should be irrelevant"
test_76a() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
- { skip "Need MDS version at least 2.4.52" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.4.52) ]] ||
+ skip "Need MDS version at least 2.4.52"
- if ! combined_mgs_mds; then
- start_mgs || error "start mgs failed"
- fi
setup
local MDMB_PARAM="osc.*.max_dirty_mb"
echo "Change MGS params"
run_test 76a "set permanent params with lctl across mounts"
test_76b() { # LU-4783
- [[ $(lustre_version_code mgs) -ge $(version_code 2.5.57) ]] ||
- { skip "Need MGS version at least 2.5.57" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.5.57) ]] ||
+ skip "Need MGS version at least 2.5.57"
stopall
setupall
do_facet mgs $LCTL get_param mgs.MGS.live.params ||
run_test 76b "verify params log setup correctly"
test_76c() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.8.54) ]] ||
- { skip "Need MDS version at least 2.4.52" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.8.54) ]] ||
+ skip "Need MDS version at least 2.4.52"
setupall
local MASK_PARAM="mdd.*.changelog_mask"
echo "Change changelog_mask"
run_test 76d "verify llite.*.xattr_cache can be set by 'lctl set_param -P' correctly"
test_77() { # LU-3445
- local server_version=$(lustre_version_code $SINGLEMDS)
- [[ $server_version -ge $(version_code 2.8.55) ]] ||
- { skip "Need MDS version 2.8.55+ "; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.8.55) ]] ||
+ skip "Need MDS version 2.8.55+ "
if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
run_test 77 "comma-separated MGS NIDs and failover node NIDs"
test_78() {
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ||
- $(facet_fstype ost1) != ldiskfs ]] &&
- skip "ldiskfs only test" && return
+ [[ "$mds1_FSTYPE" != ldiskfs ||
+ "$ost1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
# reformat the Lustre filesystem with a smaller size
local saved_MDSCOUNT=$MDSCOUNT
# check whether the MDT or OST filesystem was shrunk or not
if ! $shrunk; then
combined_mgs_mds || stop_mgs || error "(9) stop mgs failed"
- reformat || error "(10) reformat Lustre filesystem failed"
+ reformat_and_config ||
+ error "(10) reformat Lustre filesystem failed"
return 0
fi
MDSCOUNT=$saved_MDSCOUNT
OSTCOUNT=$saved_OSTCOUNT
- reformat || error "(14) reformat Lustre filesystem failed"
+ reformat_and_config || error "(14) reformat Lustre filesystem failed"
}
run_test 78 "run resize2fs on MDT and OST filesystems"
test_79() { # LU-4227
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.59) ]] ||
- { skip "Need MDS version at least 2.5.59"; return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.59) ]] ||
+ skip "Need MDS version at least 2.5.59"
local mdsdev1=$(mdsdevname 1)
local mdsvdev1=$(mdsvdevname 1)
mgsnode_opt=$(echo $opts_mds2 |
awk '{ for ( i = 1; i < NF; i++ )
if ( $i ~ "--mgsnode" ) { print $i; break } }')
- [ -n $mgsnode_opt ] &&
+ [ -n "$mgsnode_opt" ] &&
opts_mds2=$(echo $opts_mds2 | sed -e "s/$mgsnode_opt//")
mgsnode_opt=$(echo $opts_ost1 |
awk '{ for ( i = 1; i < NF; i++ )
if ( $i ~ "--mgsnode" ) { print $i; break } }')
- [ -n $mgsnode_opt ] &&
+ [ -n "$mgsnode_opt" ] &&
opts_ost1=$(echo $opts_ost1 | sed -e "s/$mgsnode_opt//")
-
+ load_modules
# -MGS, format a mdt without --mgs option
add mds1 $opts_mds1 $mdsdev1 $mdsvdev1 &&
error "Must specify --mgs when formatting mdt combined with mgs"
add ost1 $opts_ost1 $ostdev1 $ostvdev2 &&
error "Must specify --mgsnode when formatting an ost"
- reformat
+ reformat_and_config
}
run_test 79 "format MDT/OST without mgs option (should return errors)"
start_ost2 || error "Failed to start OST2"
do_facet ost1 "$LCTL set_param fail_loc=0"
- stopall
+ stop_ost2
+ stop_ost
+ stop_mds
}
run_test 80 "mgc import reconnect race"
done
OSTCOUNT=$saved_ostcount
- formatall
+ reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
}
# The main purpose of this test is to ensure the OST_INDEX_LIST functions as
# expected. This test uses OST_INDEX_LIST to format OSTs with a randomly
# assigned index and ensures we can mount such a formatted file system
test_81() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 3 ]] || skip_env "needs >= 3 OSTs"
stopall
# Check max_easize.
local max_easize=$($LCTL get_param -n llite.*.max_easize)
- [[ $max_easize -eq 128 ]] ||
- error "max_easize is $max_easize, should be 128 bytes"
+ # 65452 is XATTR_SIZE_MAX less ldiskfs ea overhead
+ if large_xattr_enabled; then
+ [[ $max_easize -ge 65452 ]] ||
+ error "max_easize is $max_easize, should be at least 65452 bytes"
+ else
+ # LU-11868
+ # 4012 is 4096 less ldiskfs ea overhead
+ [[ $max_easize -ge 4012 ]] ||
+ error "max_easize is $max_easize, should be at least 4012 bytes"
+ fi
restore_ostindex
}
#
# 5. Lastly ensure this functionality fails with directories.
test_82a() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 3 ]] || skip_env "needs >= 3 OSTs"
stopall
# Collect debug information - start of test
do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL get_param osc.*.prealloc_*_id
+ $LCTL get_param osp.*.prealloc_*_id
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL get_param osc.*.prealloc_*_id" EXIT
+ $LCTL get_param osp.*.prealloc_*_id" EXIT
# 1. If the file does not exist, new file will be created
# with specified OSTs.
local file=$DIR/$tdir/$tfile-1
- local cmd="$SETSTRIPE -o $ost_indices $file"
+ local cmd="$LFS setstripe -o $ost_indices $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file $OSTCOUNT
# will be attached with specified layout.
file=$DIR/$tdir/$tfile-2
mcreate $file || error "mcreate $file failed"
- cmd="$SETSTRIPE -o $ost_indices $file"
+ cmd="$LFS setstripe -o $ost_indices $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
# be in the OST indices list.
local start_ost_idx=${ost_indices##*,}
file=$DIR/$tdir/$tfile-3
- cmd="$SETSTRIPE -o $ost_indices -i $start_ost_idx $file"
+ cmd="$LFS setstripe -o $ost_indices -i $start_ost_idx $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file $OSTCOUNT
check_start_ost_idx $file $start_ost_idx
file=$DIR/$tdir/$tfile-4
- cmd="$SETSTRIPE"
+ cmd="$LFS setstripe"
cmd+=" -o $(exclude_items_from_list $ost_indices $start_ost_idx)"
cmd+=" -i $start_ost_idx $file"
echo -e "\n$cmd"
# 5. Specifying OST indices for directory should succeed.
local dir=$DIR/$tdir/$tdir
mkdir $dir || error "mkdir $dir failed"
- cmd="$SETSTRIPE -o $ost_indices $dir"
- if [[ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.11.53) &&
- $(lustre_version_code client -gt $(version_code 2.11.53)) ]]; then
+ cmd="$LFS setstripe -o $ost_indices $dir"
+ if [ "$MDS1_VERSION" -gt $(version_code 2.11.53) ] &&
+ [ "$CLIENT_VERSION" -gt $(version_code 2.11.53) ]; then
echo -e "\n$cmd"
eval $cmd || error "unable to specify OST indices on directory"
else
# Remove OSTs from a pool and destroy the pool.
destroy_pool $ost_pool || true
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
restore_ostindex
}
# the supplied OST index list points to OSTs not contained in the user
# supplied pool.
test_82b() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 4 ]] || { skip_env "needs >= 4 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 4 ]] || skip_env "needs >= 4 OSTs"
stopall
done
mount_client $MOUNT || error "mount client $MOUNT failed"
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# Create a new pool and add OSTs into it.
# If [--pool|-p <pool_name>] is set with [--ost-list|-o <ost_indices>],
# then the OSTs must be the members of the pool.
local file=$DIR/$tdir/$tfile
- cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
+ cmd="$LFS setstripe -p $ost_pool -o $ost_idx_in_list $file"
echo -e "\n$cmd"
eval $cmd && error "OST with index $ost_idx_in_list should be" \
"in OST pool $ost_pool"
# Only select OST $ost_idx_in_list from $ost_pool for file.
ost_idx_in_list=${ost_idx_in_pool#*,}
- cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
+ cmd="$LFS setstripe -p $ost_pool -o $ost_idx_in_list $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
- cmd="$GETSTRIPE $file"
+ cmd="$LFS getstripe $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file 2
run_test 82b "specify OSTs for file with --pool and --ost-list options"
test_83() {
- [[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
- { skip "Need OST version at least 2.6.91" && return 0; }
- if [ $(facet_fstype ost1) != ldiskfs ]; then
+ [[ "$OST1_VERSION" -ge $(version_code 2.6.91) ]] ||
+ skip "Need OST version at least 2.6.91"
+ if [ "$ost1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local dev
dev=$(ostdevname 1)
ostmnt=$(facet_mntpt ost1)
- fstype=$(facet_fstype ost1)
# Mount the OST as an ldiskfs filesystem.
- log "mount the OST $dev as a $fstype filesystem"
+ log "mount the OST $dev as a $ost1_FSTYPE filesystem"
add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
--reformat $dev > /dev/null ||
error "format ost1 error"
if ! test -b $dev; then
- mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
+ mnt_opts=$(csa_add "$OST_MOUNT_FS_OPTS" -o loop)
fi
echo "mnt_opts $mnt_opts"
- do_facet ost1 mount -t $fstype $dev \
+ do_facet ost1 mount -t "$ost1_FSTYPE" $dev \
$ostmnt $mnt_opts
# Run llverfs on the mounted ldiskfs filesystem.
# It is needed to get ENOSPACE.
- log "run llverfs in partial mode on the OST $fstype $ostmnt"
+ log "run llverfs in partial mode on the OST $ost1_FSTYPE $ostmnt"
do_rpc_nodes $(facet_host ost1) run_llverfs $ostmnt -vpl \
- "no" || error "run_llverfs error on $fstype"
+ "no" || error "run_llverfs error on $ost1_FSTYPE"
# Unmount the OST.
log "unmount the OST $dev"
err=$(do_facet ost1 dmesg | grep "VFS: Busy inodes after unmount of")
echo "string err $err"
[ -z "$err" ] || error $err
- reformat
+ reformat_and_config
}
run_test 83 "ENOSPACE on OST doesn't cause message VFS: \
Busy inodes after unmount ..."
run_test 84 "check recovery_hard_time"
test_85() {
- [[ $(lustre_version_code ost1) -ge $(version_code 2.7.55) ]] ||
- { skip "Need OST version at least 2.7.55" && return 0; }
+ [[ "$OST1_VERSION" -ge $(version_code 2.7.55) ]] ||
+ skip "Need OST version at least 2.7.55"
##define OBD_FAIL_OSD_OST_EA_FID_SET 0x197
do_facet ost1 "lctl set_param fail_loc=0x197"
start_ost
}
test_86() {
- local server_version=$(lustre_version_code $SINGLEMDS)
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-6442: no such mkfs params for ZFS OSTs" && return
- [[ $server_version -ge $(version_code 2.7.56) ]] ||
- { skip "Need server version newer than 2.7.55"; return 0; }
-
- local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
+ [ "$ost1_FSTYPE" = zfs ] &&
+ skip "LU-6442: no such mkfs params for ZFS OSTs"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
+ skip "Need server version newer than 2.7.55"
local NEWSIZE=1024
local OLDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
awk '/Flex block group size: / { print $NF; exit; }')
- local opts=OST_OPTS
- if [[ ${!opts} != *mkfsoptions* ]]; then
- eval opts=\"${!opts} \
- --mkfsoptions='\\\"-O flex_bg -G $NEWSIZE\\\"'\"
- else
- val=${!opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O flex_bg -G $NEWSIZE }
- eval opts='${val}'
- fi
+ [ "$OLDSIZE" == "$NEWSIZE" ] && skip "$NEWSIZE groups already"
+ local opts=" -O flex_bg -G $NEWSIZE"
+ opts=$(OST_FS_MKFS_OPTS+="$opts" mkfs_opts ost1 $(ostdevname 1))
+ opts+=" --reformat $(ostdevname 1) $(ostvdevname 1)"
echo "params: $opts"
trap cleanup_86 EXIT ERR
run_test 86 "Replacing mkfs.lustre -G option"
test_87() { #LU-6544
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.9.51) ]] ||
- { skip "Need MDS version at least 2.9.51" && return; }
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
- { skip "ldiskfs only test" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.9.51) ]] ||
+ skip "Need MDS version at least 2.9.51"
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
[[ $OSTCOUNT -gt 59 ]] &&
- { skip "Ignore wide striping situation" && return; }
+ skip "Ignore wide striping situation"
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
local mdsdev=$(mdsdevname 1)
local mdsvdev=$(mdsvdevname 1)
unload_modules
reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
add mds1 $(mkfs_opts mds1 ${mdsdev}) --stripe-count-hint=$stripe_cnt \
--reformat $mdsdev $mdsvdev || error "add mds1 failed"
start_mdt 1 > /dev/null || error "start mdt1 failed"
check_mount || error "check client $MOUNT failed"
#set xattr
- $SETSTRIPE -E 1M -S 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
+ $LFS setstripe -E 1M -S 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
error "Create file with 3 components failed"
$TRUNCATE $file $((1024*1024*64+1)) || error "truncate file failed"
- i=$($GETSTRIPE -I3 -c $file) || error "get 3rd stripe count failed"
+ i=$($LFS getstripe -I3 -c $file) || error "get 3rd stripe count failed"
if [ $i -ne $OSTCOUNT ]; then
left_size=$(expr $left_size + $(expr $OSTCOUNT - $i) \* 24)
echo -n "Since only $i out $OSTCOUNT OSTs are used, "
more than $left_size-byte space left in inode."
echo "Verified: at most $left_size-byte space left in inode."
- stopall
+ unmount_ldiskfs $SINGLEMDS
+
+ for i in $(seq $OSTCOUNT); do
+ stop ost$i -f || error "stop ost$i failed"
+ done
}
run_test 87 "check if MDT inode can hold EAs with N stripes properly"
test_88() {
- [ "$(facet_fstype mds1)" == "zfs" ] &&
- skip "LU-6662: no implementation for ZFS" && return
+ [ "$mds1_FSTYPE" == zfs ] &&
+ skip "LU-6662: no implementation for ZFS"
load_modules
run_test 88 "check the default mount options can be overridden"
test_89() { # LU-7131
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.9.54) ]] ||
- { skip "Need MDT version at least 2.9.54" && return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.9.54) ]] ||
+ skip "Need MDT version at least 2.9.54"
local key=failover.node
local val1=192.0.2.254@tcp0 # Reserved IPs, see RFC 5735
stopall
- [ $(facet_fstype mds1) == zfs ] && import_zpool mds1
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
# Check that parameters are added correctly
echo "tunefs --param $key=$val1"
- do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val1 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that parameters replace existing instances when added
echo "tunefs --param $key=$val2"
- do_facet mds "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val2 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that a parameter is erased properly
echo "tunefs --erase-param $key"
- do_facet mds "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
error "tunefs --erase-param $key failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
error "on-disk parameter not erased correctly via tunefs"
# Check that all the parameters are erased
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ error "tunefs --param $key=$val1 failed"
echo "tunefs --erase-params"
- do_facet mds "$TUNEFS --erase-params $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-params $mdsdev >/dev/null" ||
error "tunefs --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
- [ -z $params ] ||
- error "all on-disk parameters not erased correctly via tunefs"
+ params=$(echo $params | tr ' ' '\n')
+ [ -z "$params" ] ||
+ error "all on-disk parameters not erased correctly via tunefs $params"
# Check the order of options --erase-params and --param
echo "tunefs --param $key=$val1 --erase-params"
- do_facet mds \
+ do_facet mds1 \
"$TUNEFS --param $key=$val1 --erase-params $mdsdev >/dev/null"||
error "tunefs --param $key=$val1 --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
[ $(echo $params | tr ' ' '\n') == "$key=$val1" ] ||
error "on-disk param not added correctly with --erase-params"
- reformat
+ reformat_and_config
}
run_test 89 "check tunefs --param and --erase-param{s} options"
}
test_90a() {
- reformat
- if ! combined_mgs_mds ; then
- start_mgs
- fi
setup
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
# check default value
$LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
### test 1.
# update max_mod_rpcs_in_flight
tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
grep -c "multi_mod_rpcs")
if [ "$tmp" -ne $MDSCOUNT ]; then
- echo "Client not able to send multiple modify RPCs in parallel"
cleanup
- return
+ skip "Client not able to send multiple modify RPCs in parallel"
fi
# update max_mod_rpcs_in_flight
}
run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
-test_90c() {
- local tmp
- local mrif
- local mmrpc
+save_params_90c() {
+ # get max_rpcs_in_flight value
+ mrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ echo "max_rpcs_in_flight is $mrif_90c"
- setup
+ # get max_mod_rpcs_in_flight value
+ mmrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight)
+ echo "max_mod_rpcs_in_flight is $mmrif_90c"
- [[ $($LCTL get_param mdc.*.import |
- grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ # get MDT max_mod_rpcs_per_client value
+ mmrpc_90c=$(do_facet mds1 \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+ echo "max_mod_rpcs_per_client is $mmrpc_90c"
+}
+
+restore_params_90c() {
+ trap 0
+
+ # restore max_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ # restore max_mod_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mmrif_90c
+
+ # restore MDT max_mod_rpcs_per_client value
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+}
+
+test_90c() {
+ local tmp
+
+ setup
+
+ [[ $($LCTL get_param mdc.*.import |
+ grep "connect_flags:.*multi_mod_rpc") ]] ||
+ skip "Need MDC with 'multi_mod_rpcs' feature"
# check client is able to send multiple modify RPCs in paralell
tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
grep -c "multi_mod_rpcs")
if [ "$tmp" -ne $MDSCOUNT ]; then
- skip "Client not able to send multiple modify RPCs in parallel"
cleanup
- return
+ skip "Client not able to send multiple modify RPCs in parallel"
fi
- # get max_rpcs_in_flight value
- mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
- echo "max_rpcs_in_flight is $mrif"
-
- # get MDT max_mod_rpcs_per_client
- mmrpc=$(do_facet mds1 \
- cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
- echo "max_mod_rpcs_per_client is $mmrpc"
+ save_params_90c
+ stack_trap restore_params_90c
# testcase 1
# attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
# prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
- umount_client $MOUNT
- do_facet mds1 \
- "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- mount_client $MOUNT
+ do_facet mds1 "echo $mrif_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- $LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
- error "set max_mod_rpcs_in_flight to $mrif should fail"
+ # if max_mod_rpcs_in_flight is set to be equal to or larger than
+ # max_rpcs_in_flight, then max_rpcs_in_flight will be increased
+ if [[ "$CLIENT_VERSION" -ge $(version_code 2.13.53) ]]; then
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c ||
+ error "set max_mod_rpcs_in_flight to $mrif_90c failed"
+
+ local new_mrif=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ ((new_mrif == mrif_90c + 1)) ||
+ error "max_rpcs_in_flight was not increased"
+ fi
umount_client $MOUNT
- do_facet mds1 \
- "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
mount_client $MOUNT
# testcase 2
# attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
# prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc_90c + 2))
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
- error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc_90c + 1)) &&
+ error "set max_mod_rpcs_in_flight to $((mmrpc_90c + 1)) should fail"
+
+ # testcase 3
+ # attempt to set max_mod_rpcs_in_flight permanently
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c
+
+ remount_client $MOUNT
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" \
+ "$((mrif_90c + 1))" ||
+ error "expected '$((mrif_90c + 1))' for max_rpcs_in_flight"
+
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight" \
+ "$mrif_90c" ||
+ error "expected '$mrif_90c' for max_mod_rpcs_in_flight"
+
+ restore_params_90c
cleanup
}
run_test 90c "check max_mod_rpcs_in_flight update limits"
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
$LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/$tdir))
tmp=$($LCTL get_param -N \
mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
if [ -z "$tmp" ]; then
- skip "Client does not support multiple modify RPCs in flight"
cleanup
- return
+ skip "Client does not support multiple modify RPCs in flight"
fi
# get current value of max_mod_rcps_in_flight
check_uuid_on_mdt() {
local nid=$1
- do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
+ do_facet $SINGLEMDS "$LCTL get_param mdt.${mds1_svc}*.exports.'$nid'.uuid"
}
test_91() {
local nid
local found
- [[ $(lustre_version_code ost1) -ge $(version_code 2.7.63) ]] ||
- { skip "Need OST version at least 2.7.63" && return 0; }
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.63) ]] ||
- { skip "Need MDT version at least 2.7.63" && return 0; }
+ [[ "$OST1_VERSION" -ge $(version_code 2.7.63) ]] ||
+ skip "Need OST version at least 2.7.63"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.63) ]] ||
+ skip "Need MDT version at least 2.7.63"
start_mds || error "MDS start failed"
start_ost || error "unable to start OST"
echo "evict $nid"
do_facet $SINGLEMDS \
"$LCTL set_param -n mdt.${mds1_svc}.evict_client nid:$nid"
+ sleep 1 # eviction above is async, give it some time to proceed
found=$(check_uuid_on_mdt $nid | grep $uuid)
[ -n "$found" ] && error "found $uuid $nid on MDT"
local ldevconfpath=$1
local fstype=
local fsldevformat=""
- touch $ldevconfpath
+ rm -f $ldevconfpath
- fstype=$(facet_fstype mgs)
- if [ "$fstype" == "zfs" ]; then
- fsldevformat="$fstype:"
- else
+ local facets="mgs,$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
fsldevformat=""
- fi
-
- printf "%s\t-\t%s-MGS0000\t%s%s\n" \
- $mgs_HOST \
- $FSNAME \
- $fsldevformat \
- $(mgsdevname) > $ldevconfpath
-
- local mdsfo_host=$mdsfailover_HOST;
- if [ -z "$mdsfo_host" ]; then
- mdsfo_host="-"
- fi
-
- for num in $(seq $MDSCOUNT); do
- fstype=$(facet_fstype mds$num)
- if [ "$fstype" == "zfs" ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
- fi
-
- printf "%s\t%s\t%s-MDT%04d\t%s%s\n" \
- $mds_HOST \
- $mdsfo_host \
- $FSNAME \
- $num \
- $fsldevformat \
- $(mdsdevname $num) >> $ldevconfpath
- done
-
- local ostfo_host=$ostfailover_HOST;
- if [ -z "$ostfo_host" ]; then
- ostfo_host="-"
- fi
-
- for num in $(seq $OSTCOUNT); do
- fstype=$(facet_fstype ost$num)
- if [ "$fstype" == "zfs" ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
+ fstype=$(facet_fstype $facet)
+ [ "$fstype" = zfs ] && fsldevformat="$fstype:"
+ local host=$(facet_host $facet)
+ local fo="-"
+ local varfo=${facet}failover_HOST
+ if [ $facet == mgs ] && combined_mgs_mds; then
+ varfo=mds1failover_HOST
fi
-
- printf "%s\t%s\t%s-OST%04d\t%s%s\n" \
- $ost_HOST \
- $ostfo_host \
+ [ -n "${!varfo}" ] && fo=${!varfo}
+ local type=$(echo $facet | tr -d "[:digit:]" | \
+ tr "[:lower:]" "[:upper:]" | sed s/MDS/MDT/ )
+ local num=1
+ [ ${facet} == mgs ] ||
+ num=$(facet_number $facet)
+ printf "%s\t%s\t%s-%s%04x\t%s%s\n" \
+ ${host} \
+ ${fo} \
$FSNAME \
- $num \
+ $type \
+ $(( num - 1 )) \
$fsldevformat \
- $(ostdevname $num) >> $ldevconfpath
+ $(facet_device $facet) >> $ldevconfpath
done
echo "----- $ldevconfpath -----"
}
compare_ldev_output() {
- ldev_output=$1
- expected_output=$2
+ local ldev_output=$1
+ local expected_output=$2
sort $expected_output -o $expected_output
sort $ldev_output -o $ldev_output
generate_nids $NIDSPATH
# echo the mgs nid and compare it to environment variable MGSNID
- # also, ldev.conf and nids is a server side thing, use the OSS
- # hostname
- local output
- output=$($LDEV -c $LDEVCONFPATH -H $ost_HOST -n $NIDSPATH echo %m)
-
- echo "-- START OF LDEV OUTPUT --"
- echo -e "$output"
- echo "--- END OF LDEV OUTPUT ---"
-
- # ldev failed, error
- if [ $? -ne 0 ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed to execute!"
- fi
-
- # need to process multiple lines because of combined MGS and MDS
- echo -e $output | awk '{ print $2 }' | while read -r line ; do
- if [ "$line" != "$MGSNID" ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed mgs nid '$line', expected '$MGSNID'"
- fi
+ local facets="$(get_facets OST),$(get_facets MDS),mgs"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ local output=$($LDEV -c $LDEVCONFPATH -H $host -n $NIDSPATH echo %m)
+
+ echo "-- START OF LDEV OUTPUT --"
+ echo -e "$output"
+ echo "--- END OF LDEV OUTPUT ---"
+
+ [ -z "$output" ] &&
+ error "ldev failed to execute!"
+
+ # need to process multiple lines because of
+ # several targets on host
+ echo -e $output | awk '{ print $2 }' | while read -r line ; do
+ [ "$line" = "$MGSNID" ] ||
+ error "ldev failed mgs nid '$line', \
+ expected '$MGSNID'"
+ done
done
-
- rm $LDEVCONFPATH $NIDSPATH
+ rm -f $LDEVCONFPATH $NIDSPATH
}
run_test 92 "ldev returns MGS NID correctly in command substitution"
test_93() {
- [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
reformat
#start mgs or mgs/mdt0
start_ost || error "OST0 start fail"
#define OBD_FAIL_MGS_WRITE_TARGET_DELAY 0x90e
- do_facet mgs "$LCTL set_param fail_val = 10 fail_loc=0x8000090e"
+ do_facet mgs "$LCTL set_param fail_val=10 fail_loc=0x8000090e"
for num in $(seq 2 $MDSCOUNT); do
start_mdt $num &
done
mount_client $MOUNT || error "mount client fails"
wait_osc_import_state mds ost FULL
- wait_osc_import_state client ost FULL
+ wait_osc_import_ready client ost
check_mount || error "check_mount failed"
cleanup || error "cleanup failed with $?"
printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
echo "$mgs_HOST-$(facet_fstype mgs)" > $EXPECTED_OUTPUT
- if [ "$mgs_HOST" == "$mds_HOST" ]; then
- for num in $(seq $MDSCOUNT); do
- echo "$mds_HOST-$(facet_fstype mds$num)" \
- >> $EXPECTED_OUTPUT
- done
- fi
-
- if [ "$mgs_HOST" == "$ost_HOST" ]; then
- for num in $(seq $OSTCOUNT); do
- echo "$ost_HOST-$(facet_fstype ost$num)" \
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ [ "$mgs_HOST" == "$host" ] &&
+ echo "$host-$(facet_fstype $facet)" \
>> $EXPECTED_OUTPUT
- done
- fi
+ done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
fi
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
rm $EXPECTED_OUTPUT
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
for ((x = 1; x <= 400; x++)); do
mountopt="$mountopt,user_xattr"
done
- remount_client $mountopt $MOUNT 2>&1 | grep "too long" ||
+ mount_client $MOUNT remount,$mountopt 2>&1 | grep "too long" ||
error "Buffer overflow check failed"
cleanup || error "cleanup failed"
}
test_99()
{
- [[ $(facet_fstype ost1) != ldiskfs ]] &&
- { skip "ldiskfs only test" && return; }
- [[ $(lustre_version_code ost1) -ge $(version_code 2.8.57) ]] ||
- { skip "Need OST version at least 2.8.57" && return 0; }
+ [[ "$ost1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
+ [[ "$OST1_VERSION" -ge $(version_code 2.8.57) ]] ||
+ skip "Need OST version at least 2.8.57"
local ost_opts="$(mkfs_opts ost1 $(ostdevname 1)) \
--reformat $(ostdevname 1) $(ostvdevname 1)"
do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" &&
- skip "meta_bg already set" && return
+ skip "meta_bg already set"
local opts=ost_opts
if [[ ${!opts} != *mkfsoptions* ]]; then
echo "params: $opts"
+ load_modules
add ost1 $opts || error "add ost1 failed with new params"
do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" ||
error "meta_bg is not set"
-
- reformat
}
run_test 99 "Adding meta_bg option"
test_100() {
reformat
- start_mds || error "MDS start failed"
+
+ start_mgsmds || error "MDS start failed"
start_ost || error "unable to start OST"
mount_client $MOUNT || error "client start failed"
check_mount || error "check_mount failed"
# Desired output
# MGS:
# 0@lo
- # lustre-MDT0000:
+ # $FSNAME-MDT0000:
# 0@lo
- # lustre-OST0000:
+ # $FSNAME-OST0000:
# 0@lo
do_facet mgs 'lshowmount -v' | awk 'BEGIN {NR == 0; rc=1} /MGS:/ {rc=0}
END {exit rc}' || error "lshowmount have no output MGS"
}
run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
-test_101() {
+test_101a() {
local createmany_pid
local dev=$FSNAME-OST0000-osc-MDT0000
setup
unlinkmany $DIR1/$tdir/$tfile-%d 50000
cleanup
}
-run_test 101 "Race MDT->OST reconnection with create"
+run_test 101a "Race MDT->OST reconnection with create"
+
+test_101b () {
+ local dev=$FSNAME-OST0000-osc-MDT0000
+ local dir=$DIR1/$tdir
+ setup
+
+ mkdir $dir
+ $LFS setstripe -c 1 -i 0 $dir
+ do_facet $SINGLEMDS "$LCTL --device $dev deactivate;"
+#define OBD_FAIL_OSP_CON_EVENT_DELAY 0x2107
+ do_facet mds1 "$LCTL set_param fail_loc=0x80002107 fail_val=20"
+ do_facet $SINGLEMDS "$LCTL --device $dev activate;"
+ stop_ost
+ sleep 25
+ start_ost
+
+ wait_osc_import_state client ost1 FULL
+ touch $dir/$tfile || error "Can't create file"
+
+ cleanup
+}
+run_test 101b "Race events DISCONNECT and ACTIVE in osp"
test_102() {
- [[ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.9.53) ]] ||
+ [[ "$MDS1_VERSION" -gt $(version_code 2.9.53) ]] ||
skip "Need server version greater than 2.9.53"
+ [[ “$(mdsdevname 1)” != “$(mgsdevname)” ]] &&
+ [[ “$(facet_host mds1)” = “$(facet_host mgs)” ]] &&
+ skip "MGS must be on different node or combined"
+
cleanup || error "cleanup failed with $?"
local mds1dev=$(mdsdevname 1)
local mds1mnt=$(facet_mntpt mds1)
- local mds1fstype=$(facet_fstype mds1)
local mds1opts=$MDS_MOUNT_OPTS
- if [ $mds1fstype == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet mds1 test -b $mds1dev; then
mds1opts=$(csa_add "$mds1opts" -o loop)
fi
- if [[ $mds1fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
import_zpool mds1 || return ${PIPESTATUS[0]}
fi
echo "rename $FSNAME to $newname"
if ! combined_mgs_mds ; then
- local facet=$(mgsdevname)
+ local dev=$(mgsdevname)
do_facet mgs \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(7) Fail to rename MGS"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(7) Fail to rename MGS"
+ if [ "$(facet_fstype mgs)" = "zfs" ]; then
reimport_zpool mgs $newname-mgs
fi
fi
for num in $(seq $MDSCOUNT); do
- local facet=$(mdsdevname $num)
+ local dev=$(mdsdevname $num)
do_facet mds${num} \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(8) Fail to rename MDT $num"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(8) Fail to rename MDT $num"
+ if [ "$(facet_fstype mds${num})" = "zfs" ]; then
reimport_zpool mds${num} $newname-mdt${num}
fi
done
for num in $(seq $OSTCOUNT); do
- local facet=$(ostdevname $num)
+ local dev=$(ostdevname $num)
do_facet ost${num} \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(9) Fail to rename OST $num"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(9) Fail to rename OST $num"
+ if [ "$(facet_fstype ost${num})" = "zfs" ]; then
reimport_zpool ost${num} $newname-ost${num}
fi
done
cp $LUSTRE/tests/test-framework.sh $DIR/$tdir ||
error "(2) Fail to copy test-framework.sh"
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
do_facet mgs $LCTL pool_new $FSNAME.pool1 ||
error "(3) Fail to create $FSNAME.pool1"
# name the pool name as the fsname
test_103_set_pool $FSNAME OST0000
- $SETSTRIPE -p $FSNAME $DIR/$tdir/d0 ||
+ $LFS setstripe -p $FSNAME $DIR/$tdir/d0 ||
error "(6) Fail to setstripe on $DIR/$tdir/d0"
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
KEEP_ZPOOL=true
stopall
FSNAME="mylustre"
setupall
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
test_103_check_pool $save_fsname 7
if [ $OSTCOUNT -ge 2 ]; then
test_103_set_pool $save_fsname OST0001
fi
- $SETSTRIPE -p $save_fsname $DIR/$tdir/f0 ||
+ $LFS setstripe -p $save_fsname $DIR/$tdir/f0 ||
error "(16) Fail to setstripe on $DIR/$tdir/f0"
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
stopall
FSNAME="tfs"
setupall
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
test_103_check_pool $save_fsname 17
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
stopall
test_renamefs $save_fsname
}
run_test 103 "rename filesystem name"
-test_104() { # LU-6952
+test_104a() { # LU-6952
local mds_mountopts=$MDS_MOUNT_OPTS
local ost_mountopts=$OST_MOUNT_OPTS
local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
awk '{ print $2 }')
[[ $(version_code $lctl_ver) -lt $(version_code 2.9.55) ]] &&
- { skip "this test needs utils above 2.9.55" && return 0; }
+ skip "this test needs utils above 2.9.55"
# specify "acl" in mount options used by mkfs.lustre
if [ -z "$MDS_MOUNT_FS_OPTS" ]; then
#reformat/remount the MDT to apply the MDT_MOUNT_FS_OPT options
formatall
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
if [ -z "$MDS_MOUNT_OPTS" ]; then
MDS_MOUNT_OPTS="-o noacl"
else
MDS_MOUNT_OPTS=$mds_mountopts
OST_MOUNT_OPTS=$ost_mountopts
MDS_MOUNT_FS_OPTS=$mds_mountfsopts
+}
+run_test 104a "Make sure user defined options are reflected in mount"
- formatall
- setupall
+test_104b() { # LU-12859
+ mount_client $MOUNT3 flock,localflock
+ stack_trap "umount_client $MOUNT3" EXIT
+ mount | grep "$MOUNT3 .*,flock" && error "flock is still set"
+ mount | grep "$MOUNT3 .*,localflock" || error "localflock is not set"
+ umount_client $MOUNT3
+ mount_client $MOUNT3 localflock,flock
+ mount | grep "$MOUNT3 .*,localflock" && error "localflock is still set"
+ mount | grep "$MOUNT3 .*,flock" || error "flock is not set"
+ umount_client $MOUNT3
+ mount_client $MOUNT3 localflock,flock,noflock
+ flock_is_enabled $MOUNT3 && error "some flock is still enabled" || true
}
-run_test 104 "Make sure user defined options are reflected in mount"
+run_test 104b "Mount uses last flock argument"
error_and_umount() {
umount $TMP/$tdir
test_105() {
cleanup -f
reformat
- setup
+ setup_noconfig
mkdir -p $TMP/$tdir
mount --bind $DIR $TMP/$tdir || error "mount bind mnt pt failed"
rm -f $TMP/$tdir/$tfile
local repeat=5
reformat
- setupall
+ setup_noconfig
mkdir -p $DIR/$tdir || error "create $tdir failed"
lfs setstripe -c 1 -i 0 $DIR/$tdir
#define OBD_FAIL_CAT_RECORDS 0x1312
#shows that osp code is buggy
do_facet mds1 $LCTL set_param fail_loc=0 fail_val=0
- stopall
+ cleanup
}
run_test 106 "check osp llog processing when catalog is wrapped"
test_107() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.50) ]] ||
- { skip "Need MDS version > 2.10.50"; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.10.50) ]] ||
+ skip "Need MDS version > 2.10.50"
local cmd
start_mgsmds || error "start_mgsmds failed"
$rcmd mkdir -p $tmp/{mnt,images} || error "failed to mkdir remotely"
for facet in $facets; do
- [ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
+ [ "$mds1_FSTYPE" = zfs ] &&
$rcmd $ZPOOL -f export lustre-$facet > /dev/null 2>&1
$rcmd mkdir $tmp/mnt/$facet ||
error "failed to mkdir $tmp/mnt/$facet"
for facet in $facets; do
$rcmd umount -f $tmp/mnt/$facet ||
error "failed to umount $facet"
- if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+ if [ "$mds1_FSTYPE" = zfs ]; then
$rcmd $ZPOOL export -f lustre-$facet ||
error "failed to export lustre-$facet"
fi
}
test_108a() {
- [ "$CLIENTONLY" ] && skip "Client-only testing" && return
-
- [ $(facet_fstype $SINGLEMDS) != "zfs" ] &&
- skip "zfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.58) ] &&
- skip "Need server version at least 2.10.58" && return
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+ [ "$mds1_FSTYPE" != zfs ] && skip "zfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.58) ] &&
+ skip "Need server version at least 2.10.58"
stopall
load_modules
echo "changing server nid..."
$rcmd mount -t lustre -o nosvc lustre-mdt1/mdt1 $tmp/mnt/mdt1
- $rcmd lctl replace_nids lustre-MDT0000 $nid
- $rcmd lctl replace_nids lustre-MDT0001 $nid
- $rcmd lctl replace_nids lustre-OST0000 $nid
- $rcmd lctl replace_nids lustre-OST0001 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0000 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0001 $nid
$rcmd umount $tmp/mnt/mdt1
for facet in $facets; do
run_test 108a "migrate from ldiskfs to ZFS"
test_108b() {
- [ "$CLIENTONLY" ] && skip "Client-only testing" && return
-
- [ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.58) ] &&
- skip "Need server version at least 2.10.58" && return
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+ [ "$mds1_FSTYPE" != ldiskfs ] && skip "ldiskfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.58) ] &&
+ skip "Need server version at least 2.10.58"
stopall
load_modules
echo "changing server nid..."
$rcmd mount -t lustre -o nosvc,loop $tmp/images/mdt1 $tmp/mnt/mdt1
- $rcmd lctl replace_nids lustre-MDT0000 $nid
- $rcmd lctl replace_nids lustre-MDT0001 $nid
- $rcmd lctl replace_nids lustre-OST0000 $nid
- $rcmd lctl replace_nids lustre-OST0001 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0000 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0001 $nid
$rcmd umount $tmp/mnt/mdt1
for facet in $facets; do
done
for facet in $scrub_list; do
- $rcmd $LCTL lfsck_start -M lustre-$facet -t scrub ||
+ $rcmd $LCTL lfsck_start -M $FSNAME-$facet -t scrub ||
error "failed to start OI scrub on $facet"
done
}
run_test 108b "migrate from ZFS to ldiskfs"
-
#
# set number of permanent parameters
#
local mgsdev
if ! combined_mgs_mds ; then
- mgsdev=$MGSDEV
+ mgsdev=$(mgsdevname)
stop_mgs || error "stop_mgs failed"
start_mgs "-o nosvc" || error "start_mgs nosvc failed"
else
test_109a()
{
- [ "$(facet_fstype mgs)" == "zfs" ] &&
- skip "LU-8727: no implementation for ZFS" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.59) ] &&
+ skip "Needs MDS version 2.10.59 or later."
+ [ "$(facet_fstype mgs)" == zfs ] &&
+ skip "LU-8727: no implementation for ZFS"
+
stopall
reformat
setup_noconfig
test_109b()
{
- [ "$(facet_fstype mgs)" == "zfs" ] &&
- skip "LU-8727: no implementation for ZFS" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.59) ] &&
+ skip "Needs MDS version 2.10.59 or later."
+ [ "$(facet_fstype mgs)" == zfs ] &&
+ skip "LU-8727: no implementation for ZFS"
+
stopall
reformat
setup_noconfig
error "failed to clear client config"
setup_noconfig
-
#
# check that configurations are intact
#
test_110()
{
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
skip "Only applicable to ldiskfs-based MDTs"
do_facet $SINGLEMDS $DEBUGFS -w -R supported_features |grep large_dir ||
skip "large_dir option is not supported on OSS"
stopall # stop all targets before modifying the target counts
- stack_trap "MDSCOUNT=$MDSCOUNT OSTCOUNT=$OSTCOUNT" EXIT
+ local old_mdscount=$MDSCOUNT
+ local old_ostcount=$OSTCOUNT
+ local replace=""
+ stack_trap "MDSCOUNT=$old_mdscount OSTCOUNT=$old_ostcount" EXIT
MDSCOUNT=1
OSTCOUNT=1
(( MDSSIZE < CONF_SANITY_110_LINKS / 3 * 4/3 * 4/3 )) &&
CONF_SANITY_110_LINKS=$((MDSSIZE * 3 * 3/4 * 3/4))
+ combined_mgs_mds || replace=" --replace "
local opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
- --reformat $(mdsdevname 1) $(mdsvdevname 1)"
- if [[ $opts != *mkfsoptions* ]]; then
- opts+=" --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536\\\""
- else
- opts="${opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536 }"
+ $replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536\\\""
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536 }"
+ fi
fi
echo "MDT params: $opts"
+ load_modules
+ combined_mgs_mds || start_mgs
add mds1 $opts || error "add mds1 failed with new params"
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
opts="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
+ $replace --reformat $(ostdevname 1) $(ostvdevname 1)"
- if [[ $opts != *mkfsoptions* ]]; then
- opts+=" --mkfsoptions=\\\"-O large_dir\\\" "
- else
- opts="${opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O large_dir }"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir\\\" "
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir }"
+ fi
fi
echo "OST params: $opts"
add ost1 $opts || error "add ost1 failed with new params"
echo "waiting for PIDs$pids to complete"
wait $pids || error "createmany failed after $group groups"
+ umount_client $MOUNT2 -f
cleanup
run_e2fsck $(facet_active_host mds1) $(mdsdevname 1) -n
+ MDSCOUNT=$old_mdscount
+ OSTCOUNT=$old_ostcount
}
run_test 110 "Adding large_dir with 3-level htree"
test_111() {
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
skip "Only applicable to ldiskfs-based MDTs"
is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
# cleanup before changing target counts
cleanup
+ local old_mdscount=$MDSCOUNT
+ local old_ostcount=$OSTCOUNT
+ local old_mdssize=$MDSSIZE
+ local replace=""
stack_trap "MDSSIZE=$MDSSIZE MDSCOUNT=$MDSCOUNT OSTCOUNT=$OSTCOUNT" EXIT
MDSCOUNT=1
OSTCOUNT=1
(( MDSSIZE < 2400000 )) && MDSSIZE=2400000 # need at least 2.4GB
local mdsdev=$(mdsdevname 1)
-
+ combined_mgs_mds || replace=" --replace "
local opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
- --reformat $(mdsdevname 1) $(mdsvdevname 1)"
- if [[ $opts != *mkfsoptions* ]]; then
- opts+=" --mkfsoptions=\\\"-O large_dir -i 1048576 \\\" "
- else
- opts="${opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O large_dir -i 1048576 }"
+ $replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir -i 1048576 \\\" "
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir -i 1048576 }"
+ fi
fi
echo "MDT params: $opts"
+ load_modules
+ combined_mgs_mds || start_mgs
__touch_device mds 1
add mds1 $opts || error "add mds1 failed with new params"
start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
opts="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
- if [[ $opts != *mkfsoptions* ]]; then
- opts+=" --mkfsoptions=\\\"-O large_dir \\\""
- else
- opts="${opts//--mkfsoptions=\\\"/ --mkfsoptions=\\\"-O large_dir }"
+ $replace --reformat $(ostdevname 1) $(ostvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir \\\""
+ else
+ opts="${opts//--mkfsoptions=\\\"/ --mkfsoptions=\\\"-O large_dir }"
+ fi
fi
echo "OST params: $opts"
__touch_device ost 1
(( left > 1200 )) && needskip=1
done
+ umount_client $MOUNT2 -f
cleanup
(( $needskip )) && skip "ETA ${left}s after $num files / ${taken}s is too long"
run_e2fsck $(facet_active_host mds1) $(mdsdevname 1) -n
+ MDSCOUNT=$old_mdscount
+ OSTCOUNT=$old_ostcount
+ MDSSIZE=$old_mdssize
}
run_test 111 "Adding large_dir with over 2GB directory"
+test_112() {
+ start_mds || error "MDS start failed"
+ start_ost || error "OSS start failed"
+ echo "start ost2 service on $(facet_active_host ost2)"
+ start ost2 $(ostdevname 2) $(csa_add "$OST_MOUNT_OPTS" -o no_precreate) ||
+ error "start ost2 facet failed"
+ local val=$(do_facet ost2 \
+ "$LCTL get_param -n obdfilter.$FSNAME-OST0001*.no_precreate")
+ (( $val == 1 )) || error "obdfilter.$FSNAME-OST0001*.no_precreate=$val"
+
+ mount_client $MOUNT || error "mount client failed"
+ wait_osc_import_state mds1 ost1 FULL
+ wait_osc_import_state client ost1 FULL
+ wait_osc_import_state client ost2 FULL
+
+ $LFS setstripe -i 0 $DIR/$tfile.0 ||
+ error "problem creating $tfile.0 on OST0000"
+ $LFS setstripe -i 1 $DIR/$tfile.1 && $LFS getstripe $DIR/$tfile.1 &&
+ (( $($LFS getstripe -i $DIR/$tfile.1) == 1 )) &&
+ error "allowed to create $tfile.1 on OST0001"
+ do_facet ost2 $LCTL set_param obdfilter.*.no_precreate=0
+ sleep_maxage
+ $LFS setstripe -i 1 $DIR/$tfile.2 ||
+ error "failed to create $tfile.2 on ost1 facet"
+ # files not cleaned with ONLY_REPEAT because of client unmount below
+ rm -f $DIR/$tfile.[012]
+ stop_ost2 || error "stop ost2 facet failed"
+ cleanup
+}
+run_test 112 "mount OST with nocreate option"
cleanup_115()
{
trap 0
stopall
- rm -f $TMP/$tdir/lustre-mdt
- formatall
+ do_facet mds1 rm -f $1
}
test_115() {
- IMAGESIZE=$((3072 << 30)) # 3072 GiB
-
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
- return
fi
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
+
+ local dbfs_ver=$(do_facet mds1 $DEBUGFS -V 2>&1)
+
+ echo "debugfs version: $dbfs_ver"
+ echo "$dbfs_ver" | egrep -w "1.44.3.wc1|1.44.5.wc1|1.45.2.wc1" &&
+ skip_env "This version of debugfs doesn't show inode number"
+
+ local IMAGESIZE=$((3072 << 30)) # 3072 GiB
stopall
+
+ FLAKEY=false
+
+ echo "client1: "
+ $LCTL dl
+ mount | grep lustre
+ echo "mds1: "
+ do_facet mds1 "hostname; $LCTL dl; mount"
+ echo "ost1: "
+ do_facet ost1 "hostname; $LCTL dl; mount"
# We need MDT size 3072GB, because it is smallest
# partition that can store 2B inodes
- do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
+ do_facet mds1 "mkdir -p $TMP/$tdir"
local mdsimgname=$TMP/$tdir/lustre-mdt
- do_facet $SINGLEMDS "rm -f $mdsimgname"
- do_facet $SINGLEMDS "touch $mdsimgname"
- trap cleanup_115 RETURN EXIT
- do_facet $SINGLEMDS "$TRUNCATE $mdsimgname $IMAGESIZE" ||
- { skip "Backend FS doesn't support sparse files"; return 0; }
- local mdsdev=$(do_facet $SINGLEMDS "losetup -f")
- do_facet $SINGLEMDS "losetup $mdsdev $mdsimgname"
-
- local mds_opts="$(mkfs_opts mds1 ${mdsdev}) --device-size=$IMAGESIZE \
- --mkfsoptions='-O lazy_itable_init,ea_inode,^resize_inode,meta_bg \
- -i 1024'"
+
+ do_facet mds1 "rm -f $mdsimgname"
+ do_facet mds1 "touch $mdsimgname"
+ stack_trap "cleanup_115 $mdsimgname" EXIT
+ do_facet mds1 "$TRUNCATE $mdsimgname $IMAGESIZE" ||
+ skip "Backend FS doesn't support sparse files"
+ local mdsdev=$(do_facet mds1 "losetup -f")
+
+ do_facet mds1 "losetup $mdsdev $mdsimgname"
+
+ local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ --mkfsoptions='-O ea_inode,^resize_inode,meta_bg \
+ -N 2247484000 -E lazy_itable_init' --device-size=$IMAGESIZE"
add mds1 $mds_opts --mgs --reformat $mdsdev ||
- { skip_env "format large MDT failed"; return 0; }
- add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
- --reformat $(ostdevname 1) $(ostvdevname 1)
+ skip_env "format large MDT failed"
+
+ local ostdev=$(ostdevname 1)
- start $SINGLEMDS ${mdsdev} $MDS_MOUNT_OPTS || error "start MDS failed"
+ local opts="$(mkfs_opts ost1 $ostdev) \
+ --reformat $ostdev $ostdev"
+ add ost1 $opts || error "add ost1 failed with new params"
+ start mds1 $mdsdev $MDS_MOUNT_OPTS || error "start MDS failed"
start_ost || error "start OSS failed"
mount_client $MOUNT || error "mount client failed"
mkdir -p $DIR/$tdir || error "mkdir $DIR/$tdir fail"
- for goal in $(do_facet $SINGLEMDS "ls /sys/fs/ldiskfs/*/inode_goal"); do
- do_facet $SINGLEMDS "echo 2147483947 >> $goal; grep . $goal"
- done
-
+ local goal="/sys/fs/ldiskfs/$(basename $mdsdev)/inode_goal"
+ echo goal: $goal
+ # 2147483648 is 0x80000000
+ do_facet mds1 "echo 2147483648 >> $goal; grep . $goal"
touch $DIR/$tdir/$tfile
- # Add > 5k bytes to xattr
- for i in {1..30}; do
- ln $DIR/$tdir/$tfile $DIR/$tdir/$(printf "link%0250d" $i) ||
- error "Can't make link"
+ # attrs from 1 to 16 go to block, 17th - to inode
+ local i
+
+ for i in {1..17}; do
+ local nm="trusted.ea$i"
+ setfattr -n $nm -v $(printf "xattr%0250d" $i) $DIR/$tdir/$tfile
done
- sync; sleep 5; sync
+ do_facet mds1 "$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev"
- local inode_num=$(do_facet $SINGLEMDS \
- "$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsimgname" |
- awk '/link =/ { print $4 }' |
+ # inode <2147483649> trusted.ea16 (255)
+ local inode_num=$(do_facet mds1 \
+ "$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev" |
+ awk '/ea17/ { print $2 }' |
sed -e 's/>//' -e 's/<//' -e 's/\"//')
echo "inode num: $inode_num"
- [ $inode_num -ge 2147483947 ] || error "inode $inode_num too small"
- do_facet $SINGLEMDS "losetup -d $mdsdev"
- cleanup_115
+ [ $inode_num -ge 2147483648 ] || error "inode $inode_num too small"
+ do_facet mds1 "losetup -d $mdsdev"
}
run_test 115 "Access large xattr with inodes number over 2TB"
test_116() {
- [ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.59) ] &&
- skip "Need server version at least 2.10.59" && return
-
- do_facet $SINGLEMDS which mkfs.xfs || {
+ [ "$mds1_FSTYPE" != ldiskfs ] && skip "ldiskfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.59) ] &&
+ skip "Need server version at least 2.10.59"
+ do_facet $SINGLEMDS which mkfs.xfs ||
skip_env "No mkfs.xfs installed"
- return
- }
stopall
load_modules
MDSSIZE=$old_mdssize
MDSISIZE=$old_mdsisize
- do_facet $SINGLEMDS $MKFS $opts17t $tmpmnt/$mdtimg ||
+
+ do_facet $SINGLEMDS $MKFS \
+ ${opts17t/-E /-E lazy_itable_init,lazy_journal_init,} \
+ $tmpmnt/$mdtimg ||
error "failed to mkfs for $tmpmnt/$mdtimg"
do_facet $SINGLEMDS $TUNE2FS -l $tmpmnt/$mdtimg |
grep -qw 'features.*extent' || error "extent should be enabled"
+ reformat_and_config
}
run_test 116 "big size MDT support"
}
run_test 117 "lctl get_param return errors properly"
+test_119() {
+ local had_config
+ local size_mb
+
+ [[ "$MDSCOUNT" -ge 2 ]] || skip "Need more at least 2 MDTs"
+
+ had_config=$(do_facet mds1 "$LCTL get_param debug | grep config")
+ do_facet mds1 "$LCTL set_param debug=+config"
+ do_facet mds1 "$LCTL clear"
+
+ setup
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ # mount after writeconf will make "add osp" added to mdt0 config:
+ # 53 (224)marker 60 (flags=0x01, v2.5.1.0) lustre-MDT0001 'add osp'
+ # 54 (080)add_uuid nid=... 0: 1:...
+ # 55 (144)attach 0:lustre-MDT0001-osp-MDT0000 1:osp 2:...
+ # 56 (144)setup 0:lustre-MDT0001-osp-MDT0000 1:... 2:...
+ # 57 (136)modify_mdc_tgts add 0:lustre-MDT0000-mdtlov 1:... 2:1 3:1
+ # duplicate modify_mdc_tgts caused crashes
+
+ debug_size_save
+ # using larger debug_mb size to avoid lctl dk log truncation
+ size_mb=$((DEBUG_SIZE_SAVED * 4))
+ for i in {1..3}; do
+ stop_mdt 2
+ # though config processing stops after failed attach and setup
+ # it will proceed after the failed command after each writeconf
+ # this is the original scenario of the issue
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ do_facet mds1 "$LCTL set_param debug_mb=$size_mb"
+ start_mdt 2
+
+ wait_update_facet_cond mds1 \
+ "$LCTL dk | grep -c Processed.log.$FSNAME-MDT0000" \
+ ">" 1 300
+ done
+ debug_size_restore
+
+ [[ -z "$had_config" ]] && do_facet mds1 lctl set_param debug=-config
+
+ reformat
+}
+run_test 119 "writeconf on slave mdt shouldn't duplicate mdc/osp and crash"
+
test_120() { # LU-11130
[ "$MDSCOUNT" -lt 2 ] && skip "mdt count < 2"
- [ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
skip "ldiskfs only test"
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.11.56) ] &&
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.56) ] &&
skip "Need DNE2 capable MD target with LU-11130 fix"
setup
}
run_test 120 "cross-target rename should not create bad symlinks"
-test_122() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- [[ $(lustre_version_code ost1) -ge $(version_code 2.11.53) ]] ||
- { skip "Need OST version at least 2.11.53" && return 0; }
+test_121(){
+ stopall
+ start_mgsmds || error "MGS MDS Start failed"
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+ #failback
+ start_mds
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+}
+run_test 121 "failover MGS"
+test_122a() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
reformat
LOAD_MODULES_REMOTE=true load_modules
#define OBD_FAIL_OFD_SET_OID 0x1e0
do_facet ost1 $LCTL set_param fail_loc=0x00001e0
- setupall
+ setup_noconfig
$LFS mkdir -i1 -c1 $DIR/$tdir
$LFS setstripe -i0 -c1 $DIR/$tdir
do_facet ost1 $LCTL set_param fail_loc=0
createmany -o $DIR/$tdir/file_ 1000 ||
error "Fail to create a new sequence"
+ cleanup
+}
+run_test 122a "Check OST sequence update"
+
+test_122b() {
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
+ local err
+
reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ stack_trap cleanup EXIT
+ setup_noconfig
+ do_facet ost1 $LCTL set_param obdfilter.*.precreate_batch=256
+ $LFS mkdir -i0 -c1 $DIR/$tdir || error "failed to create directory"
+ $LFS setstripe -i0 -c1 $DIR/$tdir || error "failed to setstripe"
+ do_facet ost1 $LCTL set_param fail_loc=0
+ # overflow IDIF 32bit and create > OST_MAX_PRECREATE*5
+ # so a new wrong sequence would differ from an original with error
+ #define OST_MAX_PRECREATE 20000
+ local ost_max_precreate=20100
+ local num_create=$(( ost_max_precreate * 5 ))
+
+ # Check the number of inodes available on OST0
+ local files=0
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
+
+ if [ $ifree -lt 10000 ]; then
+ files=$(( ifree - 50 ))
+ else
+ files=10000
+ fi
+
+ local j=$((num_create / files + 1))
+
+ for i in $(seq 1 $j); do
+ createmany -o $DIR/$tdir/$tfile-$i- $files ||
+ error "createmany fail create $files files: $?"
+ unlinkmany $DIR/$tdir/$tfile-$i- $files ||
+ error "unlinkmany failed unlink $files files"
+ done
+ sync
+ touch $DIR/$tdir/$tfile
+ do_facet ost1 sync
+ #we need a write req during recovery for ofd_seq_load
+ replay_barrier ost1
+ dd if=/dev/urandom of=$DIR/$tdir/$tfile bs=1024k count=1 oflag=sync ||
+ error "failed to write file"
+
+ # OBD_FAIL_OST_CREATE_NET 0x204
+ do_facet ost1 $LCTL set_param fail_loc=0x80000204
+ fail ost1
+ createmany -o $DIR/$tdir/file_ 100
+ sync
+
+ err=$(do_facet ost1 dmesg | tac | sed "/Recovery over/,$ d" |
+ grep "OST replaced or reformatted")
+ [ -z "$err" ] || error $err
}
-run_test 122 "Check OST sequence update"
+run_test 122b "Check OST sequence wouldn't change when IDIF 32bit overflows"
test_123aa() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
- [ -d $MOUNT/.lustre ] || setupall
+ [ -d $MOUNT/.lustre ] || setup
# test old logid format until removal from llog_ioctl.c::str2logid()
if [ $MGS_VERSION -lt $(version_code 3.1.53) ]; then
[[ $MGS_VERSION -gt $(version_code 2.11.51) ]] ||
skip "Need server with working llog_print support"
- [ -d $MOUNT/.lustre ] || setupall
+ [ -d $MOUNT/.lustre ] || setup
local yaml
local orig_val
+ local mgs_arg=""
+
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
orig_val=$(do_facet mgs $LCTL get_param jobid_name)
- do_facet mgs $LCTL set_param -P jobid_name="testname"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME"
- yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
+ yaml=$(do_facet mgs $LCTL $mgs_arg llog_print params |
grep jobid_name | tail -n 1)
local param=$(awk '{ print $10 }' <<< "$yaml")
local val=$(awk '{ print $12 }' <<< "$yaml")
#return to the default
do_facet mgs $LCTL set_param -P jobid_name=$orig_val
- [ $val = "testname" ] || error "bad value: $val"
+ [ $val = "TESTNAME" ] || error "bad value: $val"
[ $param = "jobid_name," ] || error "Bad param: $param"
}
run_test 123ab "llog_print params output values from set_param -P"
local start=10
local end=50
+ local mgs_arg=""
- [ -d $MOUNT/.lustre ] || setupall
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
+
+ [ -d $MOUNT/.lustre ] || setup
# - { index: 10, event: add_uuid, nid: 192.168.20.1@tcp(0x20000c0a81401,
# node: 192.168.20.1@tcp }
- do_facet mgs $LCTL --device MGS \
+ do_facet mgs $LCTL $mgs_arg \
llog_print --start $start --end $end $FSNAME-client | tr -d , |
while read DASH BRACE INDEX idx EVENT BLAH BLAH BLAH; do
(( idx >= start )) || error "llog_print index $idx < $start"
do_facet mgs "$LCTL help llog_print" 2>&1 | grep -q -- --start ||
skip "Need 'lctl llog_print --start' on MGS"
- [ -d $MOUNT/.lustre ] || setupall
+ [ -d $MOUNT/.lustre ] || setup
# append a new record, to avoid issues if last record was cancelled
local old=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
}
run_test 123ad "llog_print shows all records"
+test_123ae() { # LU-11566
+ local max
+ local mgs_arg=""
+ local log
+ local id
+ local orig
+ local new
+ local rpcs
+
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ -d $MOUNT/.lustre ] || setupall
+
+ max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ pgs=$($LCTL get_param -n osc.*-OST0000-*.max_pages_per_rpc | head -1)
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
+
+ if do_facet mgs "$LCTL help llog_cancel" 2>&1| grep -q -- --log_id; then
+ # save one set_param -P record in case none exist
+
+ do_facet mgs $LCTL set_param -P osc.*.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL set_param -P -d \
+ osc.*.max_pages_per_rpc"
+
+ log=params
+ orig=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
+ do_facet mgs $LCTL $mgs_arg llog_print $log | tail -1 |
+ grep "parameter: osc.*.max_dirty_mb" ||
+ error "new set_param -P wasn't stored in params log"
+
+ # - { index: 71, event: set_param, device: general,
+ # param: osc.*.max_dirty_mb, value: 256 }
+ id=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL $mgs_arg llog_cancel $log --log_idx=$id
+ local new=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ (( new == orig )) ||
+ error "new llog_cancel now $new, not at $orig records"
+ fi
+
+ # test old positional parameters for a while still
+ if [ "$MGS_VERSION" -le $(version_code 3.1.53) ]; then
+ log=$FSNAME-client
+
+ do_facet mgs $LCTL conf_param \
+ $FSNAME-OST0000.osc.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL conf_param -d \
+ $FSNAME-OST0000.osc.max_pages_per_rpc"
+
+ orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$max
+ do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | grep "parameter: osc.max_dirty_mb" ||
+ error "old conf_param wasn't stored in params log"
+ do_facet mgs $LCTL --device MGS llog_print $log
+ # - { index: 71, event: conf_param, device: testfs-OST0000-osc,
+ # param: osc.max_dirty_mb=256 }
+ id=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL --device MGS llog_cancel $log $id
+ do_facet mgs $LCTL --device MGS llog_print $log
+ new=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ (( new == orig )) ||
+ error "old llog_cancel now $new, not at $orig records"
+ fi
+}
+run_test 123ae "llog_cancel can cancel requested record"
+
+test_123af() { #LU-13609
+ [ "$MGS_VERSION" -ge $(version_code 2.13.54) -a \
+ "$MDS1_VERSION" -ge $(version_code 2.13.54) ] ||
+ skip "Need both MGS and MDS version at least 2.13.54"
+
+ [ -d $MOUNT/.lustre ] || setupall
+ stack_trap "do_facet mds1 $LCTL set_param fail_loc=0" EXIT
+
+ local device
+ local facet
+ local cmd
+ local orig_clist
+ local orig_count
+ local new_clist
+ local new_count
+
+ for device in "MGS" "$FSNAME-MDT0000"; do
+ cmd="--device $device llog_catlist"
+ echo "lctl $cmd ..."
+ if [ "$device" = "MGS" ]; then
+ facet="mgs"
+ else
+ facet="mds1"
+ fi
+ orig_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ orig_count=${#orig_clist[@]}
+ echo "orig_clist: ${orig_clist[*]}"
+
+ #define OBD_FAIL_CATLIST 0x131b
+ #fetch to llog records from the second one
+ do_facet $facet $LCTL set_param fail_loc=0x131b fail_val=2
+
+ new_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ new_count=${#new_clist[@]}
+ echo "new_clist: ${new_clist[*]}"
+
+ [ $new_count -eq $((orig_count - 1)) ] ||
+ error "$new_count != $orig_count - 1"
+ for i in $(seq 0 $new_count); do
+ j=$((i + 1))
+ [ "${orig_clist[$j]}" = "${new_clist[$i]}" ] ||
+ error "${orig_clist[$j]} != ${new_clist[$i]}"
+ done
+ do_facet mds1 $LCTL set_param fail_loc=0
+ echo "done"
+ done
+}
+run_test 123af "llog_catlist can show all config files correctly"
+
+test_123ag() { # LU-15142
+ local rec
+ local orig_val
+
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ (( $MGS_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need server version least 2.14.55"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ orig_val=$(do_facet mgs $LCTL get_param jobid_name)
+ stack_trap "do_facet mgs $LCTL set_param -P jobid_name=$orig_val"
+
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ do_facet mgs $LCTL set_param -P -d jobid_name
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #1"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 1)) || error "parameter is not set"
+ # usage with ordinary set_param format works too
+ do_facet mgs $LCTL set_param -P -d jobid_name="ANY"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #2"
+}
+run_test 123ag "llog_print skips values deleted by set_param -P -d"
+
+test_123ah() { #LU-7668 del_ost
+ [ "$MGS_VERSION" -ge $(version_code 2.15.50) -a \
+ "$MDS1_VERSION" -ge $(version_code 2.15.50) ] ||
+ skip "Need both MGS and MDS version at least 2.15.50"
+
+ [ -d $MOUNT/.lustre ] || setupall
+ stack_trap "do_facet mds1 $LCTL set_param fail_loc=0" EXIT
+
+ local cmd="--device MGS llog_print"
+
+ cli_llogcnt_orig=$(do_facet mgs $LCTL $cmd $FSNAME-client |
+ grep -c $FSNAME-OST0000)
+ mds1_llogcnt_orig=$(do_facet mgs $LCTL $cmd $FSNAME-MDT0000 |
+ grep -c $FSNAME-OST0000)
+
+ [ $cli_llogcnt_orig -gt 0 ] ||
+ error "$FSNAME-OST0000 not found (client)"
+ [ $mds1_llogcnt_orig -gt 0 ] || error "$FSNAME-OST0000 not found (MDT)"
+
+ # -n/--dryrun should NOT modify catalog
+ do_facet mgs "$LCTL del_ost -n -t $FSNAME-OST0000" ||
+ error "del_ost --dryrun failed with $?"
+
+ local cli_llogcnt=$(do_facet mgs $LCTL $cmd $FSNAME-client |
+ grep -c $FSNAME-OST0000)
+ local mds1_llogcnt=$(do_facet mgs $LCTL $cmd $FSNAME-MDT0000 |
+ grep -c $FSNAME-OST0000)
+
+ [ $cli_llogcnt -eq $cli_llogcnt_orig ] ||
+ error "--dryrun error: $cli_llogcnt != $cli_llogcnt_orig"
+ [ $mds1_llogcnt -eq $mds1_llogcnt_orig ] ||
+ error "--dryrun error: $mds1_llogcnt != $mds1_llogcnt_orig"
+
+ # actual run
+ do_facet mgs "$LCTL del_ost --target $FSNAME-OST0000" ||
+ error "del_ost failed with $?"
+
+ local cli_llogcnt=$(do_facet mgs $LCTL $cmd $FSNAME-client |
+ grep -c $FSNAME-OST0000)
+ local mds1_llogcnt=$(do_facet mgs $LCTL $cmd $FSNAME-MDT0000 |
+ grep -c $FSNAME-OST0000)
+
+ # every catalog entry for OST0000 should have been cancelled
+ [ $cli_llogcnt -eq 0 ] || error "$FSNAME-OST0000 not cancelled (cli)"
+ [ $mds1_llogcnt -eq 0 ] || error "$FSNAME-OST0000 not cancelled (MDT)"
+
+ umount_client $MOUNT
+ mount_client $MOUNT
+
+ $LFS df | grep -q OST0000 && error "del_ost did not remove OST0000!"
+ cleanup
+ reformat_and_config
+}
+run_test 123ah "del_ost cancels config log entries correctly"
+
test_123F() {
- setupall
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+
+ [ -d $MOUNT/.lustre ] || setup
local yaml_file="$TMP/$tfile.yaml"
+
do_facet mgs rm "$yaml_file"
local cfgfiles=$(do_facet mgs "lctl --device MGS llog_catlist" |
sed 's/config_log://')
# set jobid_var to a different value for test
local orig_val=$(do_facet mgs $LCTL get_param jobid_var)
- do_facet mgs $LCTL set_param -P jobid_var="testname"
+
+ do_facet mgs $LCTL set_param -P jobid_var="TESTNAME"
for i in $cfgfiles params; do
do_facet mgs "lctl --device MGS llog_print ${i} >> $yaml_file"
echo "Writeconf"
writeconf_all
echo "Remounting"
- mountmgs
- mountmds
- mountoss
- mountcli
+ setup_noconfig
# Reapply the config from before
echo "Setting configuration parameters"
do_facet mgs "lctl set_param -F $yaml_file"
local set_val=$(do_facet mgs $LCTL get_param jobid_var)
+
do_facet mgs $LCTL set_param -P $orig_val
- [ $set_val == "jobid_var=testname" ] ||
- error "$set_val is not testname"
+ [ $set_val == "jobid_var=TESTNAME" ] ||
+ error "$set_val is not TESTNAME"
do_facet mgs rm "$yaml_file"
+ cleanup
}
run_test 123F "clear and reset all parameters using set_param -F"
test_124()
{
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- [ -z $mds2failover_HOST ] && skip "needs MDT failover setup" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [ -z $mds2failover_HOST ] && skip "needs MDT failover setup"
setup
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp && error "Should not be fake nid"
+ do_facet mgs $LCTL conf_param $FSNAME-MDT0001.failover.node=1.2.3.4@tcp\
+ || error "Set params error"
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp || error "Fake nid should be added"
cleanup
load_modules
fi
local nid=$(do_facet mds2 $LCTL list_nids | head -1)
local failover_nid=$(do_node $mds2failover_HOST $LCTL list_nids | head -1)
+
do_facet mgs $LCTL replace_nids $FSNAME-MDT0001 $nid:$failover_nid ||
error "replace_nids execution error"
}
run_test 124 "check failover after replace_nids"
+get_max_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_sectors_path="/sys/block/${dev_base}/queue/max_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_sectors_path} ]] &&
+ cat ${max_sectors_path}"
+}
+
+get_max_hw_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_hw_path="/sys/block/${dev_base}/queue/max_hw_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_hw_path} ]] && cat ${max_hw_path}"
+}
+
+set_max_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local value="$3"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_sectors_path="/sys/block/${dev_base}/queue/max_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_sectors_path} ]] &&
+ echo ${value} > ${max_sectors_path}"
+ rc=$?
+
+ [[ $rc -ne 0 ]] && echo "Failed to set ${max_sectors_path} to ${value}"
+
+ return $rc
+}
+
+# Return 0 if all slave devices have max_sectors_kb == max_hw_sectors_kb
+# Otherwise return > 0
+check_slaves_max_sectors_kb()
+{
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local slaves_dir=/sys/block/${dev_base}/slaves
+ local slave_devices=$(do_facet ${facet} "ls ${slaves_dir} 2>/dev/null")
+ [[ -z ${slave_devices} ]] && return 0
+
+ local slave max_sectors new_max_sectors max_hw_sectors path
+ local rc=0
+
+ for slave in ${slave_devices}; do
+ path="/dev/${slave}"
+ ! is_blkdev ${facet} ${path} && continue
+ max_sectors=$(get_max_sectors_kb ${facet} ${path})
+ max_hw_sectors=$(get_max_hw_sectors_kb ${facet} ${path})
+ new_max_sectors=${max_hw_sectors}
+ [[ ${new_max_sectors} -gt ${RQ_SIZE_LIMIT} ]] &&
+ new_max_sectors=${RQ_SIZE_LIMIT}
+
+ if [[ ${max_sectors} -ne ${new_max_sectors} ]]; then
+ echo "${path} ${max_sectors} ${new_max_sectors}"
+ ((rc++))
+ fi
+ check_slaves_max_sectors_kb ${facet} ${path}
+ ((rc + $?))
+ done
+
+ return $rc
+}
+
+test_125()
+{
+ local facet_list="mgs mds1 ost1"
+ combined_mgs_mds && facet_list="mgs ost1"
+
+ local facet
+ for facet in ${facet_list}; do
+ [[ $(facet_fstype ${facet}) != ldiskfs ]] &&
+ skip "ldiskfs only test" &&
+ return 0
+ ! is_blkdev ${facet} $(facet_device ${facet}) &&
+ skip "requires all real devices" &&
+ return 0
+ done
+
+ local rc=0
+ # We don't increase IO request size limit past 16MB. See comments in
+ # lustre/utils/libmount_utils_ldiskfs.c:tune_max_sectors_kb()
+ RQ_SIZE_LIMIT=$((16 * 1024))
+ local device old_max_sectors new_max_sectors max_hw_sectors
+ for facet in ${facet_list}; do
+ device=$(facet_device ${facet})
+ old_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+ max_hw_sectors=$(get_max_hw_sectors_kb ${facet} ${device})
+
+ # The expected value after l_tunedisk is executed
+ new_max_sectors=$old_max_sectors
+ [[ ${new_max_sectors_kb} -gt ${RQ_SIZE_LIMIT} ]] &&
+ new_max_sectors_kb=${RQ_SIZE_LIMIT}
+
+ # Ensure the current value of max_sectors_kb does not equal
+ # max_hw_sectors_kb, so we can tell whether l_tunedisk did
+ # anything
+ set_max_sectors_kb ${facet} ${device} $((new_max_sectors - 1))
+
+ # Value before l_tunedisk
+ local pre_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+ if [[ ${pre_max_sectors} -ne $((new_max_sectors - 1)) ]]; then
+ echo "unable to satsify test pre-condition:"
+ echo "${pre_max_sectors} != $((new_max_sectors - 1))"
+ ((rc++))
+ continue
+ fi
+
+ echo "Before: ${facet} ${device} ${pre_max_sectors} ${max_hw_sectors}"
+
+ do_facet ${facet} "l_tunedisk ${device}"
+
+ # Value after l_tunedisk
+ local post_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+
+ echo "After: ${facet} ${device} ${post_max_sectors} ${max_hw_sectors}"
+
+ if [[ ${facet} != ost1 ]]; then
+ if [[ ${post_max_sectors} -ne ${pre_max_sectors} ]]; then
+ echo "l_tunedisk modified max_sectors_kb of ${facet}"
+ ((rc++))
+ fi
+
+ set_max_sectors_kb ${facet} ${device} ${old_max_sectors}
+ else
+ if [[ ${post_max_sectors} -eq ${pre_max_sectors} ]]; then
+ echo "l_tunedisk failed to modify max_sectors_kb of ${facet}"
+ ((rc++))
+ fi
+
+ check_slaves_max_sectors_kb ${facet} ${device} ||
+ ((rc++))
+ fi
+ done
+
+ return $rc
+}
+run_test 125 "check l_tunedisk only tunes OSTs and their slave devices"
+
+test_126() {
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.52) ]] ||
+ skip "Need MDS version at least 2.13.52"
+
+ cleanup
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ../libcfs/libcfs/libcfs
+ #define OBD_FAIL_OBD_SETUP 0x60d
+ do_facet mds1 $LCTL set_param fail_loc=0x60d
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_modules &
+ for i in {1..40}; do
+ do_facet mds1 lsmod | grep -q osd_$mds1_FSTYPE && break
+ sleep 1
+ done
+ clear_failloc $SINGLEMDS 20 &
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+}
+run_test 126 "mount in parallel shouldn't cause a crash"
+
+test_127() {
+ [[ "$ost1_FSTYPE" == ldiskfs ]] || skip "ldiskfs only test"
+
+ cleanup
+ setup
+ zconf_umount_clients $RCLIENTS $MOUNT
+
+ wait_osp_active ost ${FSNAME}-OST0000 0 1
+ local osc_tgt="$FSNAME-OST0000-osc-$($LFS getname -i $DIR)"
+ local avail1=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ $LFS setstripe -i 0 $DIR/$tfile || error "failed creating $DIR/$tfile"
+ dd if=/dev/zero of=$DIR/$tfile bs=1M oflag=direct || true
+
+ local avail2=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ if ((avail2 * 100 / avail1 > 1)); then
+ lfs df $DIR
+ ls -l $DIR/$tfile
+ error "more than 1% space left: before=$avail1 after=$avail2"
+ fi
+
+ local mbs=$(($(stat -c %s $DIR/$tfile) / (1024 * 1024)))
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=$mbs conv=notrunc \
+ oflag=direct || error "overwrite failed"
+}
+run_test 127 "direct io overwrite on full ost"
+
+test_128()
+{
+ combined_mgs_mds && skip "need separate mgs device"
+ [ "$ost2_FSTYPE" == zfs ] && import_zpool ost2
+
+ format_ost 2
+ # Try to apply nolocallogs to the virgin OST. Should fail.
+ do_facet ost2 "$TUNEFS --nolocallogs $(ostdevname 2)" &&
+ error "nolocallogs should not be allowed on the virgin target"
+
+ setupall
+ stopall
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Start OST without MGS (local configs)
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)"
+ start_ost || error "unable to start OST1"
+ stop_ost || error "Unable to stop OST1"
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Do not allow reading local configs, should fail
+ do_facet ost1 "$TUNEFS --nolocallogs $(ostdevname 1)" ||
+ error "Can not set nolocallogs"
+ start_ost && error "OST1 started, but should fail"
+
+ # Connect to MGS successfully, reset nolocallogs flag
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ start_mgs || error "unable to start MGS"
+ start_ost || error "unable to start OST1"
+
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)" | grep "nolocallogs" &&
+ error "nolocallogs expected to be reset"
+
+ stop_ost || error "Unable to stop OST1"
+}
+run_test 128 "Force using remote logs with --nolocallogs"
+
+test_129()
+{
+ stopall
+ start_mds || error "MDS start failed"
+ format_ost 1
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "start ost1 should fail" || true
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "second start ost1 should fail" || true
+ do_facet ost1 "$TUNEFS --writeconf $(ostdevname 1)"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS ||
+ error "start ost1 failed"
+ stop ost1
+ stop_mds
+}
+run_test 129 "attempt to connect an OST with the same index should fail"
+
+test_130()
+{
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ setupall
+ stop_mdt 2 || error "mdt2 stop failed"
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)"
+ start_mdt 2 || error "mdt2 start failed"
+ do_facet mds2 "$LCTL dl" | grep MDT0001-osp-MDT0001 &&
+ error "Illegal OSP device created" || true
+}
+run_test 130 "re-register an MDT after writeconf"
+
+test_131() {
+ [ "$mds1_FSTYPE" == "ldiskfs" ] || skip "ldiskfs only test"
+ do_facet mds1 $DEBUGFS -R features $(mdsdevname 1) |
+ grep -q project || skip "skip project quota not supported"
+
+ local projid
+
+ setupall
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir
+ $LFS project -p 1000 $DIR/$tdir || error "set dir project id failed"
+ createmany -o $DIR/$tdir/f 512
+ for ((i = 0; i < 512; ++i)); do
+ $LFS project -p $i $DIR/$tdir/f${i} ||
+ error "set f${i} project id failed"
+ done
+
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir.inherit
+ $LFS project -p 1001 -s $DIR/$tdir.inherit
+ createmany -o $DIR/$tdir.inherit/f 128
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "files did not inherit projid 1001"
+
+ stopall
+
+ for i in $(seq $MDSCOUNT); do
+ mds_backup_restore mds$i ||
+ error "Backup/restore on mds$i failed"
+ done
+
+ setupall
+
+ projid=($($LFS project -d $DIR/$tdir))
+ [ ${projid[0]} == "1000" ] ||
+ error "projid expected 1000 not ${projid[0]}"
+ for ((i = 0; i < 512; ++i)); do
+ projid=($($LFS project $DIR/$tdir/f${i}))
+ [ ${projid[0]} == "$i" ] ||
+ error "projid expected $i not ${projid[0]}"
+ done
+
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "restore did not copy projid 1001"
+}
+run_test 131 "MDT backup restore with project ID"
+
+test_132() {
+ local err_cnt
+ local err_cnt2
+
+ reformat
+ combined_mgs_mds || start_mgs || error "unable to start MGS"
+ start_mdt 1 || error "unable to start mdt1"
+
+ err_cnt=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ stop_mdt 1 || error "stop mdt1 failed"
+
+ [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ do_facet mds1 $TUNEFS --param mdt.hsm_control=enabled $(mdsdevname 1) ||
+ error "tunefs failed"
+ start_mdt 1 || error "cannot start mdt1"
+
+ err_cnt2=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ [ $err_cnt -eq $err_cnt2 ] || error "Can not take the layout lock"
+ stop_mdt 1 || error "stop mdt1 failed"
+}
+run_test 132 "hsm_actions processed after failover"
+
+# This test verifies we do RR allocation within a pool even if there is a
+# significant imbalance vs an OST outside the pool
+test_133() {
+ [[ $OSTCOUNT -lt 4 ]] && skip_env "needs >= 4 OSTs"
+ # This is the easiest way to ensure OSTs start out balanced
+ reformat_and_config
+ setupall
+
+ check_set_fallocate_or_skip
+
+ local testfile=$DIR/$tdir/$tfile
+ local pool="testpool"
+ local ostrange=$((OSTCOUNT - 1))
+ # Select all but the last OST to add to the pool
+ local poolostrange=$((OSTCOUNT - 2))
+ local filenum=20
+ local filecount
+ local stripecount
+
+ declare -a AVAIL
+ free_min_max
+
+ [ $MINV -eq 0 ] && error "no free space in OST$MINI"
+ [ $MAXV -gt $((2 * $MINV)) ] &&
+ error "OSTs badly unbalanced after reformat"
+
+ create_pool $FSNAME.$pool || error "failed to create a pool"
+ do_facet mgs $LCTL pool_add $FSNAME.$pool OST[0-$poolostrange] ||
+ error "failed to add OST[0-$poolostrange] to the pool"
+
+ test_mkdir -p $DIR/$tdir || error "failed to mkdir $DIR/$tdir"
+ # Consume space on the OSTs in the pool so they are unbalanced with the
+ # OST outside of the pool
+ # fill each OST 90% with fallocate so they are widely
+ # imbalanced
+ local size=$(((MINV * 9 / 10) * 1024))
+ for ((i = 0; i <= poolostrange; i++)); do
+ $LFS setstripe -c 1 -i $i $testfile$i ||
+ error "failed to setstripe $testfile$i"
+ fallocate -l $size $testfile$i || error "fallocate failed"
+ done
+ ls -la $DIR/$tdir
+ sleep_maxage
+ $LFS df
+
+ # Create files in the pool now that there is an imbalance
+ filecount=$(((OSTCOUNT - 1) * filenum))
+ for ((i = 0; i < filecount; i++)); do
+ $LFS setstripe -p $pool $testfile-$i ||
+ error "failed to setstripe -p $pool $testfile-$i"
+ done
+ $LFS getstripe -i $testfile-* > /tmp/$tfile.log
+ # Count the number of files with a stripe on each OST to verify the
+ # pool allocated with round-robin
+ for ((i = 0; i <= poolostrange; i++)); do
+ stripecount=$(grep -c $i /tmp/$tfile.log)
+ # Allow a little leeway
+ if (( stripecount < filenum - 1 ||
+ stripecount > filenum + 1 )); then
+ cat /tmp/$tfile.log
+ error "$stripecount != $filenum files on OST$i"
+ fi
+ done
+
+ # Create files across the system now that there is an imbalance
+ filecount=$((OSTCOUNT * filenum))
+ for ((i = 1; i < filecount; i++)); do
+ $LFS setstripe $testfile-$i.2 ||
+ error "failed to setstripe $testilfe-$i.2"
+ done
+ $LFS getstripe -i $testfile-*.2 > /tmp/$tfile.log
+ local qos_used=""
+ # Count the number of files with a stripe on each OST to verify the
+ # files are *NOT* allocated with round-robin
+ for ((i = 0; i <= ostrange; i++)); do
+ stripecount=$(grep -c $i /tmp/$tfile.log)
+ if [[ $stripecount -ne $filenum ]]; then
+ qos_used="true"
+ echo "QOS: $stripecount != $filenum files on OST$i"
+ fi
+ done
+ if [ -z "$qos_used" ]; then
+ error "QOS not used on imbalanced OSTs!"
+ fi
+
+ rm -rf /tmp/$tfile.log $DIR/$tdir
+ do_facet mgs $LCTL pool_remove $FSNAME.$pool OST[0-$poolostrange] ||
+ "failed to remove OST[0-$poolostrange] from the pool"
+ do_facet mgs $LCTL pool_destroy $FSNAME.$pool ||
+ error "failed to destroy pool"
+}
+run_test 133 "stripe QOS: free space balance in a pool"
+
if ! combined_mgs_mds ; then
stop mgs
fi