ONLY=${ONLY:-"$*"}
# bug number for skipped test: LU-8972
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 101"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
is_sles11() # LU-2181
fi
# check MDTs too
- for num in $(seq $MDSCOUNT); do
- local mdtosc=$(get_mdtosc_proc_path mds${num} $FSNAME-OST0001)
- local MPROC="osc.$mdtosc.active"
- local MAX=30
- local WAIT=0
- while [ 1 ]; do
- sleep 5
- RESULT=$(do_facet mds${num} "$LCTL get_param -n $MPROC")
- [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
- if [ $RESULT -eq $DEAC ]; then
- echo -n "MDT deactivated also after"
- echo "$WAIT sec (got $RESULT)"
- break
- fi
- WAIT=$((WAIT + 5))
- if [ $WAIT -eq $MAX ]; then
- error "MDT active: wanted $DEAC got $RESULT"
- fi
- echo "Waiting $(($MAX - $WAIT))secs for MDT deactivated"
- done
- done
+ wait_osp_active ost ${FSNAME}-OST0001 1 0
+
# test new client starts deactivated
umount_client $MOUNT || error "umount_client $MOUNT failed"
mount_client $MOUNT || error "mount_client $MOUNT failed"
local IMGTYPE=$(facet_fstype $SINGLEMDS)
- tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\')
+ tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\' | grep -v "2_9")
if [ -z "$tarballs" ]; then
skip "No applicable tarballs found"
reformat_and_config
}
-test_48() { # bug 17636
- reformat
+test_48() { # bz-17636 LU-7473
+ local count
+
setup_noconfig
check_mount || error "check_mount failed"
$GETSTRIPE $MOUNT/widestripe ||
error "$GETSTRIPE $MOUNT/widestripe failed"
- trap cleanup_48 EXIT ERR
+ # In the future, we may introduce more EAs, such as selinux, enlarged
+ # LOV EA, and so on. These EA will use some EA space that is shared by
+ # ACL entries. So here we only check some reasonable ACL entries count,
+ # instead of the max number that is calculated from the max_ea_size.
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.57) ];
+ then
+ count=28 # hard coded of RPC protocol
+ elif [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ count=4000 # max_num 4091 max_ea_size = 32768
+ elif ! large_xattr_enabled; then
+ count=450 # max_num 497 max_ea_size = 4012
+ else
+ count=4500 # max_num 8187 max_ea_size = 1048492
+ # not create too much (>5000) to save test time
+ fi
- # fill acl buffer for avoid expand lsm to them
- getent passwd | awk -F : '{ print "u:"$1":rwx" }' | while read acl; do
- setfacl -m $acl $MOUNT/widestripe
+ echo "It is expected to hold at least $count ACL entries"
+ trap cleanup_48 EXIT ERR
+ for ((i = 0; i < $count; i++)) do
+ setfacl -m u:$((i + 100)):rw $MOUNT/widestripe ||
+ error "Fail to setfacl for $MOUNT/widestripe at $i"
done
+ cancel_lru_locks mdc
stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
+ local r_count=$(getfacl $MOUNT/widestripe | grep "user:" | wc -l)
+ count=$((count + 1)) # for the entry "user::rw-"
+
+ [ $count -eq $r_count ] ||
+ error "Expected ACL entries $count, but got $r_count"
cleanup_48
}
# prepare MDT/OST, make OSC inactive for OST1
[ "$MDSCOUNT" -lt "2" ] && skip_env "$MDSCOUNT < 2, skipping" && return
+ load_modules
[ $(facet_fstype mds2) == zfs ] && import_zpool mds2
do_facet mds2 "$TUNEFS --param mdc.active=0 $(mdsdevname 2)" ||
error "tunefs MDT2 failed"
"$TEST" "${FSNAME}-MDT0001.mdc.active" 0 ||
error "Unable to deactivate MDT2"
+ wait_osp_active mds ${FSNAME}-MDT0001 1 0
+
$LFS mkdir -i1 $DIR/$tdir/2 &&
error "mkdir $DIR/$tdir/2 succeeds after deactive MDT"
+ $LFS mkdir -i0 -c$MDSCOUNT $DIR/$tdir/striped_dir ||
+ error "mkdir $DIR/$tdir/striped_dir fails after deactive MDT2"
+
+ local stripe_count=$($LFS getdirstripe -c $DIR/$tdir/striped_dir)
+ [ $stripe_count -eq $((MDSCOUNT - 1)) ] ||
+ error "wrong $stripe_count != $((MDSCOUNT -1)) for striped_dir"
+
# cleanup
umount_client $MOUNT || error "Unable to umount client"
stop_mds
local mgsnid
local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+ combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
+
add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
--reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT ||
error "start fs2mds failed"
mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
- mgsnid="$mgsnid,$mgsnid:$mgsnid"
+ mgsnid="0.0.0.0@tcp,$mgsnid,$mgsnid:$mgsnid"
- add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
+ add fs2ost --mgsnode=$mgsnid $(mkfs_opts ost1 $fs2ostdev) \
--failnode=$failnid --fsname=$fsname \
--reformat $fs2ostdev $fs2ostvdev ||
error "add fs2ost failed"
test_83() {
[[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
{ skip "Need OST version at least 2.6.91" && return 0; }
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
- skip "Only applicable to ldiskfs-based MDTs"
+ if [ $(facet_fstype ost1) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based OSTs"
return
fi
# Mount the OST as an ldiskfs filesystem.
log "mount the OST $dev as a $fstype filesystem"
add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
- --reformat $dev $dev > /dev/null ||
+ --reformat $dev > /dev/null ||
error "format ost1 error"
if ! test -b $dev; then
}
run_test 103 "rename filesystem name"
+test_104() { # LU-6952
+ local mds_mountopts=$MDS_MOUNT_OPTS
+ local ost_mountopts=$OST_MOUNT_OPTS
+ local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
+ local lctl_ver=$(do_facet $SINGLEMDS $LCTL --version |
+ awk '{ print $2 }')
+
+ [[ $(version_code $lctl_ver) -lt $(version_code 2.9.55) ]] &&
+ { skip "this test needs utils above 2.9.55" && return 0; }
+
+ # specify "acl" in mount options used by mkfs.lustre
+ if [ -z "$MDS_MOUNT_FS_OPTS" ]; then
+ MDS_MOUNT_FS_OPTS="acl,user_xattr"
+ else
+
+ MDS_MOUNT_FS_OPTS="${MDS_MOUNT_FS_OPTS},acl,user_xattr"
+ fi
+
+ echo "mountfsopt: $MDS_MOUNT_FS_OPTS"
+
+ #reformat/remount the MDT to apply the MDT_MOUNT_FS_OPT options
+ formatall
+ if [ -z "$MDS_MOUNT_OPTS" ]; then
+ MDS_MOUNT_OPTS="-o noacl"
+ else
+ MDS_MOUNT_OPTS="${MDS_MOUNT_OPTS},noacl"
+ fi
+
+ for num in $(seq $MDSCOUNT); do
+ start mds$num $(mdsdevname $num) $MDS_MOUNT_OPTS ||
+ error "Failed to start MDS"
+ done
+
+ for num in $(seq $OSTCOUNT); do
+ start ost$num $(ostdevname $num) $OST_MOUNT_OPTS ||
+ error "Failed to start OST"
+ done
+
+ mount_client $MOUNT
+ setfacl -m "d:$RUNAS_ID:rwx" $MOUNT &&
+ error "ACL is applied when FS is mounted with noacl."
+
+ MDS_MOUNT_OPTS=$mds_mountopts
+ OST_MOUNT_OPTS=$ost_mountopts
+ MDS_MOUNT_FS_OPTS=$mds_mountfsopts
+
+ formatall
+ setupall
+}
+run_test 104 "Make sure user defined options are reflected in mount"
+
if ! combined_mgs_mds ; then
stop mgs
fi