#!/bin/bash
-# requirement:
-# add uml1 uml2 uml3 in your /etc/hosts
+# -*- mode: Bash; tab-width: 4; indent-tabs-mode: t; -*-
+# vim:autoindent:shiftwidth=4:tabstop=4:
# FIXME - there is no reason to use all of these different
# return codes, espcially when most of them are mapped to something
ONLY=${ONLY:-"$*"}
-# These tests don't apply to mountconf
-MOUNTCONFSKIP="10 11 12 13 13b 14 15"
-# bug number for skipped test: 13739
-HEAD_EXCEPT=" 32a 32b "
-
-# bug number for skipped test:
-ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $MOUNTCONFSKIP $HEAD_EXCEPT"
+# bug number for skipped test:
+# 15977
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
+if [ "$FAILURE_MODE" = "HARD" ]; then
+ CONFIG_EXCEPTIONS="24a " && \
+ echo "Except the tests: $CONFIG_EXCEPTIONS for FAILURE_MODE=$FAILURE_MODE, bug 23573" && \
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
+fi
+
SRCDIR=`dirname $0`
PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
-MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
-MKFSLUSTRE=${MKFSLUSTRE:-/usr/sbin/mkfs.lustre}
-HOSTNAME=`hostname`
. $LUSTRE/tests/test-framework.sh
init_test_env $@
+
+# use small MDS + OST size to speed formatting time
+# do not use too small MDSSIZE/OSTSIZE, which affect the default jouranl size
+MDSSIZE=200000
+OSTSIZE=200000
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+
# STORED_MDSSIZE is used in test_18
if [ -n "$MDSSIZE" ]; then
STORED_MDSSIZE=$MDSSIZE
fi
-# use small MDS + OST size to speed formatting time
-MDSSIZE=40000
-OSTSIZE=40000
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+
+init_logging
#
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a "
+require_dsh_mds || exit 0
+require_dsh_ost || exit 0
+#
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="30a 31 45"
+
assert_DIR
formatall
}
+writeconf1() {
+ local facet=$1
+ local dev=$2
+
+ stop ${facet} -f
+ rm -f ${facet}active
+ # who knows if/where $TUNEFS is installed? Better reformat if it fails...
+ do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" ||
+ { echo "tunefs failed, reformatting instead" && reformat_and_config && return 1; }
+ return 0
+}
+
writeconf() {
- local facet=mds
- shift
- stop ${facet} -f
- rm -f ${facet}active
- # who knows if/where $TUNEFS is installed? Better reformat if it fails...
- do_facet ${facet} "$TUNEFS --writeconf $MDSDEV" || echo "tunefs failed, reformatting instead" && reformat
+ # we need ldiskfs
+ load_modules
+ # if writeconf fails anywhere, we reformat everything
+ writeconf1 mds `mdsdevname 1` || return 0
+ writeconf1 ost1 `ostdevname 1` || return 0
+ writeconf1 ost2 `ostdevname 2` || return 0
}
gen_config() {
- reformat
- # The MGS must be started before the OSTs for a new fs, so start
- # and stop to generate the startup logs.
+ # The MGS must be started before the OSTs for a new fs, so start
+ # and stop to generate the startup logs.
start_mds
start_ost
- sleep 5
+ wait_osc_import_state mds ost FULL
stop_ost
stop_mds
}
+reformat_and_config() {
+ reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+ gen_config
+}
+
+start_mgs () {
+ echo "start mgs"
+ start mgs $MGSDEV $MGS_MOUNT_OPTS
+}
+
start_mds() {
- echo "start mds service on `facet_active_host mds`"
- start mds $MDSDEV $MDS_MOUNT_OPTS || return 94
+ local facet=$SINGLEMDS
+ # we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
+ local num=$(echo $facet | tr -d "mds")
+ local dev=$(mdsdevname $num)
+ echo "start mds service on `facet_active_host $facet`"
+ start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
+}
+
+start_mgsmds() {
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+ start_mds $@
}
stop_mds() {
- echo "stop mds service on `facet_active_host mds`"
+ echo "stop mds service on `facet_active_host $SINGLEMDS`"
# These tests all use non-failover stop
- stop mds -f || return 97
+ stop $SINGLEMDS -f || return 97
}
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
- start ost1 `ostdevname 1` $OST_MOUNT_OPTS || return 95
+ start ost1 `ostdevname 1` $OST_MOUNT_OPTS $@ || return 95
}
stop_ost() {
start_ost2() {
echo "start ost2 service on `facet_active_host ost2`"
- start ost2 `ostdevname 2` $OST_MOUNT_OPTS || return 92
+ start ost2 `ostdevname 2` $OST_MOUNT_OPTS $@ || return 92
}
stop_ost2() {
}
manual_umount_client(){
+ local rc
+ local FORCE=$1
echo "manual umount lustre on ${MOUNT}...."
- do_facet client "umount -d $MOUNT"
+ do_facet client "umount -d ${FORCE} $MOUNT"
+ rc=$?
+ return $rc
}
setup() {
- start_ost
+ start_mds || error "MDT start failed"
+ start_ost || error "OST start failed"
+ mount_client $MOUNT || error "client start failed"
+}
+
+setup_noconfig() {
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
start_mds
+ start_ost
mount_client $MOUNT
}
cleanup_nocli() {
- stop_mds || return 201
stop_ost || return 202
+ stop_mds || return 201
unload_modules || return 203
}
check_mount() {
do_facet client "cp /etc/passwd $DIR/a" || return 71
do_facet client "rm $DIR/a" || return 72
- # make sure lustre is actually mounted (touch will block,
- # but grep won't, so do it after)
+ # make sure lustre is actually mounted (touch will block,
+ # but grep won't, so do it after)
do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
echo "setup single mount lustre success"
}
check_mount2() {
- do_facet client "touch $DIR/a" || return 71
- do_facet client "rm $DIR/a" || return 72
- do_facet client "touch $DIR2/a" || return 73
- do_facet client "rm $DIR2/a" || return 74
+ do_facet client "touch $DIR/a" || return 71
+ do_facet client "rm $DIR/a" || return 72
+ do_facet client "touch $DIR2/a" || return 73
+ do_facet client "rm $DIR2/a" || return 74
echo "setup double mount lustre success"
}
exit
fi
+init_gss
+
#create single point mountpoint
-gen_config
-
-init_gss
+reformat_and_config
test_0() {
setup
run_test 0 "single mount setup"
test_1() {
+ start_mds || error "MDT start failed"
start_ost
echo "start ost second time..."
- setup
+ start_ost && error "2nd OST start should fail"
+ mount_client $MOUNT || error "client start failed"
check_mount || return 42
cleanup || return $?
}
run_test 1 "start up ost twice (should return errors)"
test_2() {
- start_ost
- start_mds
- echo "start mds second time.."
start_mds
+ echo "start mds second time.."
+ start_mds && error "2nd MDT start should fail"
+ start_ost
mount_client $MOUNT
check_mount || return 43
cleanup || return $?
test_3() {
setup
#mount.lustre returns an error if already in mtab
- mount_client $MOUNT && return $?
+ mount_client $MOUNT && error "2nd client mount should fail"
check_mount || return 44
cleanup || return $?
}
grep " $MOUNT " /etc/mtab && echo "test 5b: mtab before mount" && return 10
mount_client $MOUNT && return 1
grep " $MOUNT " /etc/mtab && echo "test 5b: mtab after failed mount" && return 11
- umount_client $MOUNT
+ umount_client $MOUNT
# stop_mds is a no-op here, and should not fail
cleanup_nocli || return $?
return 0
run_test 5b "mds down, cleanup after failed mount (bug 2712) (should return errs)"
test_5c() {
- start_ost
start_mds
+ start_ost
[ -d $MOUNT ] || mkdir -p $MOUNT
grep " $MOUNT " /etc/mtab && echo "test 5c: mtab before mount" && return 10
local oldfs="${FSNAME}"
run_test 5d "mount with ost down"
test_5e() {
- start_ost
start_mds
+ start_ost
#define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
do_facet client "lctl set_param fail_loc=0x80000506"
do_facet ost1 lctl set_param subsystem_debug=\'mds ost\' || return 1
CHECK_PTLDEBUG="`do_facet ost1 lctl get_param -n debug`"
- if [ "$CHECK_PTLDEBUG" ] && [ "$CHECK_PTLDEBUG" = "trace inode" ];then
+ if [ "$CHECK_PTLDEBUG" ] && { \
+ [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
+ [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
echo "lnet.debug success"
else
echo "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
fi
stop_ost || return $?
}
-
run_test 9 "test ptldebug and subsystem for mkfs"
-test_10() {
- echo "generate configuration with the same name for node and mds"
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="broken.xml"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- facet="mds"
- rm -f ${facet}active
- add_facet $facet
- echo "the name for node and mds is the same"
- do_lmc --add mds --node ${facet}_facet --mds ${facet}_facet \
- --dev $MDSDEV --size $MDSSIZE || return $?
- do_lmc --add lov --mds ${facet}_facet --lov lov1 --stripe_sz \
- $STRIPE_BYTES --stripe_cnt $STRIPES_PER_OBJ \
- --stripe_pattern 0 || return $?
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
- facet="client"
- add_facet $facet --lustre_upcall $UPCALL
- do_lmc --add mtpt --node ${facet}_facet --mds mds_facet \
- --lov lov1 --path $MOUNT
-
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT
- check_mount || return 41
- cleanup || return $?
-
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 10 "mount lustre with the same name for node and mds"
-
-test_11() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf11.xml"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT --ost ost_svc || return $?
- echo "Default lov config success!"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT && return $?
- echo "--add mtpt with neither --lov nor --ost will return error"
-
- echo ""
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 11 "use default lov configuration (should return error)"
-
-test_12() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="batch.xml"
- BATCHFILE="batchfile"
-
- # test double quote
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
- # --mkfsoptions "-I 128"
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched double quote success"
- else
- echo "matched double quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
- # --mkfsoptions "-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched double quote should return error"
-
- # test single quote
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
- # --mkfsoptions '-I 128'
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched single quote success"
- else
- echo "matched single quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
- # --mkfsoptions '-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched single quote should return error"
-
- # test backslash
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
- # --mkfsoptions \-\I\ \128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "backslash followed by a whitespace/letter success"
- else
- echo "backslash followed by a whitespace/letter fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
- # --mkfsoptions -I\ 128\
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "backslash followed by nothing should return error"
-
- rm -f $BATCHFILE
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
-
-test_13a() { # was test_13
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
-
- # check long uuid will be truncated properly and uniquely
- echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- do_lmc --add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp
- do_lmc --add mds --node $HOSTNAME --mds mds1_name_longer_than_31characters
- do_lmc --add mds --node $HOSTNAME --mds mds2_name_longer_than_31characters
- if [ ! -f "$XMLCONFIG" ]; then
- echo "Error:no file $XMLCONFIG created!"
- return 1
- fi
- EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
- EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
- FOUNDMDS1UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '1p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- FOUNDMDS2UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '2p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- [ -z "$FOUNDMDS1UUID" ] && echo "MDS1 UUID empty" && return 1
- [ -z "$FOUNDMDS2UUID" ] && echo "MDS2 UUID empty" && return 1
- if ([ $EXPECTEDMDS1UUID = $FOUNDMDS1UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS2UUID ]) || \
- ([ $EXPECTEDMDS1UUID = $FOUNDMDS2UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS1UUID ]); then
- echo "Success:long uuid truncated successfully and being unique."
- else
- echo "Error:expected uuid for mds1 and mds2: $EXPECTEDMDS1UUID; $EXPECTEDMDS2UUID"
- echo "but: found uuid for mds1 and mds2: $FOUNDMDS1UUID; $FOUNDMDS2UUID"
- return 1
- fi
- rm -f $XMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13a "check new_uuid of lmc operating correctly"
-
-test_13b() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
- SECONDXMLCONFIG="conf13-2.xml"
- # check multiple invocations for lmc generate same XML configuration file
- rm -f $XMLCONFIG
- echo "Generate the first XML configuration file"
- gen_config
- echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
- sed -e "s/mtime[^ ]*//" $XMLCONFIG > $SECONDXMLCONFIG || return $?
- echo "Generate the second XML configuration file"
- gen_config
- # don't compare .xml mtime, it will always be different
- if [ `sed -e "s/mtime[^ ]*//" $XMLCONFIG | diff - $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
- echo "Success:multiple invocations for lmc generate same XML file"
- else
- echo "Error: multiple invocations for lmc generate different XML file"
- return 1
- fi
-
- rm -f $XMLCONFIG $SECONDXMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13b "check lmc generates consistent .xml file"
-
-test_14() {
- rm -f $XMLCONFIG
-
- # create xml file with --mkfsoptions for ost
- echo "create xml file with --mkfsoptions for ost"
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
- --mkfsoptions "-Llabel_conf_14"
- add_client client mds --lov lov1 --path $MOUNT
-
- FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
- EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
- if [ "$EXPECTEDSTRING" != "$FOUNDSTRING" ]; then
- echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
- return 1
- fi
- echo "Success:mkfsoptions for ost written to xml file correctly."
-
- # mount lustre to test lconf mkfsoptions-parsing
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT || return $?
- if [ -z "`do_facet ost1 dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
- echo "Error: the mkoptions not applied to mke2fs of ost."
- return 1
- fi
- cleanup
- echo "lconf mkfsoptions for ost success"
-
- gen_config
-}
-run_test 14 "test mkfsoptions of ost for lmc and lconf"
-
-cleanup_15() {
- trap 0
- [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
- if [ -f $MOUNTLUSTRE.sav ]; then
- echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
- mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
- fi
-}
-
-# this only tests the kernel mount command, not anything about lustre.
-test_15() {
- MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
- start_ost
- start_mds
-
- echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
- if [ -f "$MOUNTLUSTRE" ]; then
- echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
- mv $MOUNTLUSTRE $MOUNTLUSTRE.sav && trap cleanup_15 EXIT INT
- if [ -f $MOUNTLUSTRE ]; then
- skip "$MOUNTLUSTRE cannot be moved, skipping test"
- return 0
- fi
- fi
-
- mount_client $MOUNT && error "mount succeeded" && return 1
- echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
- cleanup_15
- cleanup || return $?
-}
-run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
-
-# LOGS/PENDING do not exist anymore since CMD3
-test_16() {
- TMPMTPT="${TMP}/conf16"
-
- if [ ! -e "$MDSDEV" ]; then
- log "no $MDSDEV existing, so mount Lustre to create one"
- setup
- check_mount || return 41
- cleanup || return $?
- fi
-
- [ -f "$MDSDEV" ] && LOOPOPT="-o loop"
-
- log "change the mode of $MDSDEV/OBJECTS to 555"
- do_facet mds "mkdir -p $TMPMTPT &&
- mount $LOOPOPT -t $FSTYPE $MDSDEV $TMPMTPT &&
- chmod 555 $TMPMTPT/OBJECTS &&
- umount $TMPMTPT" || return $?
-
- log "mount Lustre to change the mode of OBJECTS, then umount Lustre"
- setup
- check_mount || return 41
- cleanup || return $?
-
- log "read the mode of OBJECTS and check if they has been changed properly"
- EXPECTEDOBJECTSMODE=`do_facet mds "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
-
- if [ "$EXPECTEDOBJECTSMODE" = "0777" ]; then
- log "Success:Lustre change the mode of OBJECTS correctly"
- else
- error "Lustre does not change mode of OBJECTS properly"
- fi
-}
-run_test 16 "verify that lustre will correct the mode of OBJECTS"
+#
+# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
+# But with new MDS stack we don't care about the mode of local objects
+# anymore, so this test is removed. See bug 22944 for more details.
+#
test_17() {
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
if [ ! -e "$MDSDEV" ]; then
echo "no $MDSDEV existing, so mount Lustre to create one"
setup
fi
echo "Remove mds config log"
- do_facet mds "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
+ do_facet $SINGLEMDS "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
start_ost
start_mds && return 42
- gen_config
+ reformat_and_config
}
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
test_18() {
[ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
local MIN=2000000
local OK=
[ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
log "use file $MDSDEV with MIN=$MIN"
- [ -z "$OK" ] && skip "$MDSDEV too small for ${MIN}kB MDS" && return
+ [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
echo "mount mds with large journal..."
MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
- gen_config
+ reformat_and_config
echo "mount lustre system..."
setup
check_mount || return 41
echo "check journal size..."
- local FOUNDSIZE=`do_facet mds "debugfs -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
+ local FOUNDSIZE=`do_facet mds "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
else
cleanup || return $?
MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
- gen_config
+ reformat_and_config
}
run_test 18 "check mkfs creates large journals"
test_20() {
# first format the ost/mdt
- start_ost
start_mds
+ start_ost
mount_client $MOUNT
check_mount || return 43
rm -f $DIR/$tfile
test_21a() {
start_mds
start_ost
+ wait_osc_import_state mds ost FULL
stop_ost
stop_mds
}
test_21b() {
start_ost
start_mds
+ wait_osc_import_state mds ost FULL
stop_mds
stop_ost
}
start_ost
start_mds
start_ost2
+ wait_osc_import_state mds ost2 FULL
stop_ost
stop_ost2
stop_mds
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 21c "start mds between two osts, stop mds last"
test_22() {
- #reformat to remove all logs
- reformat
start_mds
- echo Client mount before any osts are in the logs
- mount_client $MOUNT
- check_mount && return 41
- pass
echo Client mount with ost in logs, but none running
start_ost
+ # wait until mds connected to ost and open client connection
+ wait_osc_import_state mds ost FULL
stop_ost
mount_client $MOUNT
# check_mount will block trying to contact ost
+ mcreate $DIR/$tfile || return 40
+ rm -f $DIR/$tfile || return 42
umount_client $MOUNT
pass
run_test 22 "start a client before osts (should return errs)"
test_23a() { # was test_23
- setup
- # fail mds
- stop mds
+ setup
+ # fail mds
+ stop $SINGLEMDS
# force down client so that recovering mds waits for reconnect
local running=$(grep -c $MOUNT /proc/mounts) || true
if [ $running -ne 0 ]; then
local PID1
local PID2
local WAIT=0
- local MAX_WAIT=20
+ local MAX_WAIT=30
local sleep=1
while [ "$WAIT" -lt "$MAX_WAIT" ]; do
sleep $sleep
echo "waiting for mount to finish ... "
WAIT=$(( WAIT + sleep))
done
- [ "$WAIT" -eq "$MAX_WAIT" ] && error "MOUNT_PID $MOUNT_PID and \
- MOUNT__LUSTRE_PID $MOUNT__LUSTRE_PID still not killed in $WAIT secs"
- ps -ef | grep mount
+ if [ "$WAIT" -eq "$MAX_WAIT" ]; then
+ error "MOUNT_PID $MOUNT_PID and "\
+ "MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
+ ps -ef | grep mount
+ fi
stop_mds || error
stop_ost || error
}
cleanup_nocli
test_23b() { # was test_23
- start_ost
start_mds
+ start_ost
# Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
lctl set_param fail_loc=0x80000313
mount_client $MOUNT
}
test_24a() {
- #set up fs1
+ #set up fs1
gen_config
+
#set up fs2
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
rm $MOUNT2/b || return 4
# 2 is actually mounted
grep $MOUNT2' ' /proc/mounts > /dev/null || return 5
- # failover
+ # failover
facet_failover fs2mds
facet_failover fs2ost
df
- umount_client $MOUNT
+ umount_client $MOUNT
# the MDS must remain up until last MDT
stop_mds
- MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+ MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
[ -z "$MDS" ] && error "No MDT" && return 8
cleanup_24a
cleanup_nocli || return 6
run_test 24a "Multiple MDTs on a single node"
test_24b() {
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
if [ -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
- add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
+ add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
setup
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && return 2
cleanup || return 6
test_26() {
load_modules
# we need modules before mount for sysctl, so make sure...
- do_facet mds "lsmod | grep -q lustre || modprobe lustre"
+ do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
#define OBD_FAIL_MDS_FS_SETUP 0x135
- do_facet mds "lctl set_param fail_loc=0x80000135"
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000135"
start_mds && echo MDS started && return 1
lctl get_param -n devices
DEVS=$(lctl get_param -n devices | wc -l)
local myfacet=$1
local TEST=$2
local PARAM=$3
- local ORIG=$(do_facet $myfacet "$TEST")
+ local ORIG=$(do_facet $myfacet "$TEST")
if [ $# -gt 3 ]; then
local FINAL=$4
else
FINAL=$(($ORIG + 5))
fi
echo "Setting $PARAM from $ORIG to $FINAL"
- do_facet mds "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
- local RESULT
- local MAX=90
- local WAIT=0
- while [ 1 ]; do
- sleep 5
- RESULT=$(do_facet $myfacet "$TEST")
- if [ $RESULT -eq $FINAL ]; then
- echo "Updated config after $WAIT sec (got $RESULT)"
- break
- fi
- WAIT=$((WAIT + 5))
- if [ $WAIT -eq $MAX ]; then
- echo "Config update not seen: wanted $FINAL got $RESULT"
- return 3
- fi
- echo "Waiting $(($MAX - $WAIT)) secs for config update"
- done
+ do_facet $SINGLEMDS "$LCTL conf_param $PARAM='$FINAL'" || error conf_param failed
+
+ wait_update $(facet_host $myfacet) "$TEST" "$FINAL" || error check failed!
}
test_27a() {
start_ost || return 1
start_mds || return 2
- echo "Requeue thread should have started: "
- ps -e | grep ll_cfg_requeue
+ echo "Requeue thread should have started: "
+ ps -e | grep ll_cfg_requeue
set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
cleanup_nocli
}
run_test 27a "Reacquire MGS lock if OST started first"
test_27b() {
+ # FIXME. ~grev
setup
- facet_failover mds
- set_and_check mds "lctl get_param -n mdt.$FSNAME-MDT0000.identity_acquire_expire" "$FSNAME-MDT0000.mdt.identity_acquire_expire" || return 3
- set_and_check client "lctl get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" "$FSNAME-MDT0000.mdc.max_rpcs_in_flight" || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+
+ facet_failover $SINGLEMDS
+ set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
+ set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
check_mount
cleanup
}
run_test 28 "permanent parameter setting"
test_29() {
- [ "$OSTCOUNT" -lt "2" ] && skip "$OSTCOUNT < 2, skipping" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
setup > /dev/null 2>&1
start_ost2
sleep 10
echo "Live client success: got $RESULT"
fi
- # check MDT too
- local MPROC="osc.$FSNAME-OST0001-osc-[M]*.active"
+ # check MDT too
+ local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0001)
+ mdtosc=${mdtosc/-MDT*/-MDT\*}
+ local MPROC="osc.$mdtosc.active"
local MAX=30
local WAIT=0
while [ 1 ]; do
sleep 5
- RESULT=`do_facet mds " lctl get_param -n $MPROC"`
+ RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
[ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
if [ $RESULT -eq $DEAC ]; then
echo "MDT deactivated also after $WAIT sec (got $RESULT)"
cleanup_nocli
#writeconf to remove all ost2 traces for subsequent tests
writeconf
- start_mds
- start_ost
- cleanup
}
run_test 29 "permanently remove an OST"
-test_30() {
+test_30a() {
setup
+ echo Big config llog
TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
ORIG=$($TEST)
LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
for i in ${LIST[@]}; do
set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
done
- # make sure client restart still works
+ # make sure client restart still works
umount_client $MOUNT
mount_client $MOUNT || return 4
- [ "$($TEST)" -ne "$i" ] && return 5
- set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $ORIG || return 6
+ [ "$($TEST)" -ne "$i" ] && error "Param didn't stick across restart $($TEST) != $i"
+ pass
+
+ echo Erase parameter setting
+ do_facet mgs "$LCTL conf_param -d $FSNAME.llite.max_read_ahead_whole_mb" || return 6
+ umount_client $MOUNT
+ mount_client $MOUNT || return 6
+ FINAL=$($TEST)
+ echo "deleted (default) value=$FINAL, orig=$ORIG"
+ # assumes this parameter started at the default value
+ [ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
+
cleanup
}
-run_test 30 "Big config llog"
+run_test 30a "Big config llog and conf_param deletion"
+
+test_30b() {
+ setup
+
+ # Make a fake nid. Use the OST nid, and add 20 to the least significant
+ # numerical part of it. Hopefully that's not already a failover address for
+ # the server.
+ OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+ ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
+ NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
+ NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
+ echo "Using fake nid $NEW"
+
+ TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
+ set_and_check client "$TEST" "$FSNAME-OST0000.failover.node" $NEW || error "didn't add failover nid $NEW"
+ NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
+ echo $NIDS
+ NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
+ echo "should have 2 failover nids: $NIDCOUNT"
+ [ $NIDCOUNT -eq 2 ] || error "Failover nid not added"
+ do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" || error "conf_param delete failed"
+ umount_client $MOUNT
+ mount_client $MOUNT || return 3
+
+ NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
+ echo $NIDS
+ NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
+ echo "only 1 final nid should remain: $NIDCOUNT"
+ [ $NIDCOUNT -eq 1 ] || error "Failover nids not removed"
+
+ cleanup
+}
+run_test 30b "Remove failover nids"
test_31() { # bug 10734
# ipaddr must not exist
}
run_test 31 "Connect to non-existent node (shouldn't crash)"
+# Use these start32/stop32 fn instead of t-f start/stop fn,
+# for local devices, to skip global facet vars init
+stop32 () {
+ local facet=$1
+ shift
+ echo "Stopping local ${MOUNT%/*}/${facet} (opts:$@)"
+ umount -d $@ ${MOUNT%/*}/${facet}
+ losetup -a
+}
+
+start32 () {
+ local facet=$1
+ shift
+ local device=$1
+ shift
+ mkdir -p ${MOUNT%/*}/${facet}
+
+ echo "Starting local ${facet}: $@ $device ${MOUNT%/*}/${facet}"
+ mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}
+ local RC=$?
+ if [ $RC -ne 0 ]; then
+ echo "mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}"
+ echo "Start of ${device} of local ${facet} failed ${RC}"
+ fi
+ losetup -a
+ return $RC
+}
+
+cleanup_nocli32 () {
+ stop32 mds1 -f
+ stop32 ost1 -f
+ wait_exit_ST client
+}
+
+cleanup_32() {
+ trap 0
+ echo "Cleanup test_32 umount $MOUNT ..."
+ umount -f $MOUNT || true
+ echo "Cleanup local mds ost1 ..."
+ cleanup_nocli32
+ unload_modules
+}
+
test_32a() {
- # XXX - make this run on client-only systems with real hardware on
- # the OST and MDT
- # there appears to be a lot of assumption here about loopback
- # devices
- # or maybe this test is just totally useless on a client-only system
+ client_only && skip "client only testing" && return 0
[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
- [ "$mds_HOST" = "`hostname`" ] || { skip "remote MDS" && return 0; }
- [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
- { skip "remote OST" && return 0; }
-
- [ -z "$TUNEFS" ] && skip "No tunefs" && return
- local DISK1_4=$LUSTRE/tests/disk1_4.zip
- [ ! -r $DISK1_4 ] && skip "Cant find $DISK1_4, skipping" && return
+ [ -z "$TUNEFS" ] && skip_env "No tunefs" && return 0
+ local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
+ [ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
local tmpdir=$TMP/conf32a
- unzip -o -j -d $tmpdir $DISK1_4 || { skip "Cant unzip $DISK1_4, skipping" && return ; }
+ mkdir -p $tmpdir
+ tar xjvf $DISK1_8 -C $tmpdir || \
+ { skip_env "Cannot untar $DISK1_8" && return 0; }
+
load_modules
- lctl set_param debug=$PTLDEBUG
+ $LCTL set_param debug=$PTLDEBUG
$TUNEFS $tmpdir/mds || error "tunefs failed"
+
# nids are wrong, so client wont work, but server should start
- start mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" || return 3
- local UUID=$(lctl get_param -n mdt.lustre-MDT0000.uuid)
+ start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
+ trap cleanup_32 EXIT INT || return 3
+
+ local UUID=$($LCTL get_param -n mdt.lustre-MDT0000.uuid)
echo MDS uuid $UUID
- [ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "lustre-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
- $TUNEFS --mgsnode=`hostname` $tmpdir/ost1 || error "tunefs failed"
- start ost1 $tmpdir/ost1 "-o loop" || return 5
- UUID=$(lctl get_param -n obdfilter.lustre-OST0000.uuid)
+ $TUNEFS --mgsnode=$HOSTNAME $tmpdir/ost1 || error "tunefs failed"
+ start32 ost1 $tmpdir/ost1 "-o loop" || return 5
+ UUID=$($LCTL get_param -n obdfilter.lustre-OST0000.uuid)
echo OST uuid $UUID
- [ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "lustre-OST0000_UUID" ] || error "UUID is wrong: $UUID"
local NID=$($LCTL list_nids | head -1)
- echo "OSC changes should return err:"
- $LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 && return 7
- $LCTL conf_param lustre-OST0000.failover.node=$NID && return 8
+ echo "OSC changes should succeed:"
+ $LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 || return 7
+ $LCTL conf_param lustre-OST0000.failover.node=$NID || return 8
echo "ok."
- echo "MDC changes should succeed:"
+
+ echo "MDC changes should succeed:"
$LCTL conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
$LCTL conf_param lustre-MDT0000.failover.node=$NID || return 10
echo "ok."
- # With a new good MDT failover nid, we should be able to mount a client
- # (but it cant talk to OST)
- local OLDMOUNTOPT=$MOUNTOPT
- MOUNTOPT="exclude=lustre-OST0000"
- mount_client $MOUNT
- MOUNTOPT=$OLDMOUNTOPT
- set_and_check client "lctl get_param -n mdc.*.max_rpcs_in_flight" "lustre-MDT0000.mdc.max_rpcs_in_flight" ||
- return 11
+ echo "LOV changes should succeed:"
+ $LCTL pool_new lustre.interop || return 11
+ $LCTL conf_param lustre-MDT0000.lov.stripesize=4M || return 12
+ echo "ok."
- zconf_umount `hostname` $MOUNT -f
- cleanup_nocli
- load_modules
+ cleanup_32
- # mount a second time to make sure we didnt leave upgrade flag on
+ # mount a second time to make sure we didnt leave upgrade flag on
load_modules
$TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
- load_modules
- start mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" || return 12
- cleanup_nocli
+ start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
+ trap cleanup_32 EXIT INT || return 12
+
+ cleanup_32
rm -rf $tmpdir || true # true is only for TMP on NFS
}
-run_test 32a "Upgrade from 1.4 (not live)"
+run_test 32a "Upgrade from 1.8 (not live)"
test_32b() {
- # XXX - make this run on client-only systems with real hardware on
- # the OST and MDT
- # there appears to be a lot of assumption here about loopback
- # devices
- # or maybe this test is just totally useless on a client-only system
- [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
- [ "$mds_HOST" = "`hostname`" ] || { skip "remote MDS" && return 0; }
- [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
- { skip "remote OST" && return 0; }
-
- [ -z "$TUNEFS" ] && skip "No tunefs" && return
- local DISK1_4=$LUSTRE/tests/disk1_4.zip
- [ ! -r $DISK1_4 ] && skip "Cant find $DISK1_4, skipping" && return
+ client_only && skip "client only testing" && return 0
+ [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
+ [ -z "$TUNEFS" ] && skip_env "No tunefs" && return
+ local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
+ [ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
local tmpdir=$TMP/conf32b
- unzip -o -j -d $tmpdir $DISK1_4 || { skip "Cant unzip $DISK1_4, skipping" && return ; }
+ mkdir -p $tmpdir
+ tar xjvf $DISK1_8 -C $tmpdir || \
+ { skip_env "Cannot untar $DISK1_8" && return ; }
+
load_modules
- lctl set_param debug=$PTLDEBUG
- NEWNAME=sofia
+ $LCTL set_param debug="config"
+ local NEWNAME=lustre
# writeconf will cause servers to register with their current nids
$TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
- start mds $tmpdir/mds "-o loop" || return 3
- local UUID=$(lctl get_param -n mdt.${NEWNAME}-MDT0000.uuid)
+ start32 mds1 $tmpdir/mds "-o loop" && \
+ trap cleanup_32 EXIT INT || return 3
+
+ local UUID=$($LCTL get_param -n mdt.${NEWNAME}-MDT0000.uuid)
echo MDS uuid $UUID
- [ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
- $TUNEFS --mgsnode=`hostname` --fsname=$NEWNAME --writeconf $tmpdir/ost1 || error "tunefs failed"
- start ost1 $tmpdir/ost1 "-o loop" || return 5
- UUID=$(lctl get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
+ $TUNEFS --mgsnode=$HOSTNAME --writeconf --fsname=$NEWNAME $tmpdir/ost1 ||\
+ error "tunefs failed"
+ start32 ost1 $tmpdir/ost1 "-o loop" || return 5
+ UUID=$($LCTL get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
echo OST uuid $UUID
- [ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "${NEWNAME}-OST0000_UUID" ] || error "UUID is wrong: $UUID"
- echo "OSC changes should succeed:"
+ local NID=$($LCTL list_nids | head -1)
+
+ echo "OSC changes should succeed:"
$LCTL conf_param ${NEWNAME}-OST0000.osc.max_dirty_mb=15 || return 7
$LCTL conf_param ${NEWNAME}-OST0000.failover.node=$NID || return 8
echo "ok."
- echo "MDC changes should succeed:"
+
+ echo "MDC changes should succeed:"
$LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
+ $LCTL conf_param ${NEWNAME}-MDT0000.failover.node=$NID || return 10
+ echo "ok."
+
+ echo "LOV changes should succeed:"
+ $LCTL pool_new ${NEWNAME}.interop || return 11
+ $LCTL conf_param ${NEWNAME}-MDT0000.lov.stripesize=4M || return 12
echo "ok."
# MDT and OST should have registered with new nids, so we should have
# a fully-functioning client
echo "Check client and old fs contents"
- OLDFS=$FSNAME
- FSNAME=$NEWNAME
- mount_client $MOUNT
- FSNAME=$OLDFS
- set_and_check client "lctl get_param -n mdc.*.max_rpcs_in_flight" "${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight" || return 11
- [ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "2479747619 779" ] || return 12
+
+ local device=`h2$NETTYPE $HOSTNAME`:/$NEWNAME
+ echo "Starting local client: $HOSTNAME: $device $MOUNT"
+ mount -t lustre $device $MOUNT || return 1
+
+ local old=$($LCTL get_param -n mdc.*.max_rpcs_in_flight)
+ local new=$((old + 5))
+ $LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=$new
+ wait_update $HOSTNAME "$LCTL get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
+
+ [ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "94306271 1478" ] || return 12
echo "ok."
- cleanup
+ cleanup_32
+
rm -rf $tmpdir || true # true is only for TMP on NFS
}
-run_test 32b "Upgrade from 1.4 with writeconf"
+run_test 32b "Upgrade from 1.8 with writeconf"
test_33a() { # bug 12333, was test_33
local rc=0
local FSNAME2=test-123
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
- add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
+ add fs2mds $MDS_MKFS_OPTS --mkfsoptions='\"-J size=8\"' --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
- do_facet mds "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
+ do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
mkdir -p $MOUNT2
mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
echo "ok."
+ cp /etc/hosts $MOUNT2/ || rc=3
+ $LFS getstripe $MOUNT2/hosts
+
umount -d $MOUNT2
stop fs2ost -f
stop fs2mds -f
fi
cleanup
- return 0
+ return 0
}
run_test 34b "force umount with failed mds should be normal"
fi
cleanup
- return 0
+ return 0
}
run_test 34c "force umount with failed ost should be normal"
-test_35() { # bug 12459
+test_35a() { # bug 12459
setup
DBG_SAVE="`lctl get_param -n debug`"
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- do_facet mds $LCTL conf_param ${FSNAME}-MDT0000.failover.node=$FAKENID || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
- MSG="conf-sanity.sh test_35 `date +%F%kh%Mm%Ss`"
+ MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
$LCTL clear
log "$MSG"
log "Stopping the MDT:"
# contact after the connection loss
$LCTL dk $TMP/lustre-log-$TESTNAME.log
NEXTCONN=`awk "/${MSG}/ {start = 1;}
- /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
+ /import_select_connection.*$device-mdc.* using connection/ {
if (start) {
if (\\\$NF ~ /$FAKENID/)
print \\\$NF;
}" $TMP/lustre-log-$TESTNAME.log`
[ "$NEXTCONN" != "0" ] && log "The client didn't try to reconnect to the last active server (tried ${NEXTCONN} instead)" && return 7
cleanup
+ # remove nid settings
+ writeconf
}
-run_test 35 "Reconnect to the last active server first"
+run_test 35a "Reconnect to the last active server first"
+
+test_35b() { # bug 18674
+ remote_mds || { skip "local MDS" && return 0; }
+ setup
+
+ debugsave
+ $LCTL set_param debug="ha"
+ $LCTL clear
+ MSG="conf-sanity.sh test_35b `date +%F%kh%Mm%Ss`"
+ log "$MSG"
+
+ log "Set up a fake failnode for the MDS"
+ FAKENID="127.0.0.2"
+ local device=$(do_facet mds "$LCTL get_param -n devices" | \
+ awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet mds "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
+ return 1
+
+ local at_max_saved=0
+ # adaptive timeouts may prevent seeing the issue
+ if at_is_enabled; then
+ at_max_saved=$(at_max_get mds)
+ at_max_set 0 mds client
+ fi
+
+ mkdir -p $MOUNT/testdir
+ touch $MOUNT/testdir/test
+
+ log "Injecting EBUSY on MDS"
+ # Setting OBD_FAIL_MDS_RESEND=0x136
+ do_facet mds "$LCTL set_param fail_loc=0x80000136" || return 2
+
+ log "Stat on a test file"
+ stat $MOUNT/testdir/test
+
+ log "Stop injecting EBUSY on MDS"
+ do_facet mds "$LCTL set_param fail_loc=0" || return 3
+ rm -f $MOUNT/testdir/test
+
+ log "done"
+ # restore adaptive timeout
+ [ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds client
+
+ $LCTL dk $TMP/lustre-log-$TESTNAME.log
+
+ # retrieve from the log if the client has ever tried to
+ # contact the fake server after the loss of connection
+ FAILCONN=`awk "BEGIN {ret = 0;}
+ /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
+ ret = 1;
+ if (\\\$NF ~ /$FAKENID/) {
+ ret = 2;
+ exit;
+ }
+ }
+ END {print ret}" $TMP/lustre-log-$TESTNAME.log`
+
+ [ "$FAILCONN" == "0" ] && \
+ log "ERROR: The client reconnection has not been triggered" && \
+ return 4
+ [ "$FAILCONN" == "2" ] && \
+ log "ERROR: The client tried to reconnect to the failover server while the primary was busy" && \
+ return 5
+
+ cleanup
+ # remove nid settings
+ writeconf
+}
+run_test 35b "Continue reconnection retries, if the active server is busy"
test_36() { # 12743
local rc
local FSNAME2=test1234
local fs3ost_HOST=$ost_HOST
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
rc=0
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
- [ $OSTCOUNT -lt 2 ] && skip "skipping test for single OST" && return
+ [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
{ skip "remote OST" && return 0; }
ALLOWANCE=$((64 * $OSTCOUNT))
- if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
+ if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
[ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
rc=1
fi
- if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
+ if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
[ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
rc=2
fi
- if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
+ if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
[ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
rc=3
run_test 36 "df report consistency on OSTs with different block size"
test_37() {
- [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+ client_only && skip "client only testing" && return 0
LOCAL_MDSDEV="$TMP/mdt.img"
SYM_MDSDEV="$TMP/sym_mdt.img"
stop_mds
log "rename lov_objid file on MDS"
rm -f $TMP/lov_objid.orig
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
- do_facet mds "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.orig"
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
+ do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"rm lov_objid\\\" $MDSDEV"
+
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.orig"
# check create in mds_lov_connect
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new"
- [ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
-
+ do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new"
+ [ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
+
# check it's updates in sync
umount_client $MOUNT
stop_mds
- do_facet mds dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
- do_facet mds "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
- do_facet mds "debugfs -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
+ do_facet $SINGLEMDS dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
+ do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"rm lov_objid\\\" $MDSDEV"
+ do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new1"
+ do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new1"
umount_client $MOUNT
stop_mds
[ "$ERROR" = "y" ] && error "old and new files are different after sync" || true
-
+
log "files compared the same"
cleanup
}
PTLDEBUG=+malloc
setup
cleanup
- perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
+ perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
error "memory leak detected" || true
}
run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
test_40() { # bug 15759
start_ost
#define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
- do_facet mds "sysctl -w lustre.fail_loc=0x80000706"
+ do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
start_mds
cleanup
}
test_41() { #bug 14134
local rc
- start mds $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
start ost1 `ostdevname 1` $OST_MOUNT_OPTS
- start mds $MDSDEV $MDS_MOUNT_OPTS -o nomgs
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
mkdir -p $MOUNT
mount_client $MOUNT || return 1
sleep 5
umount_client $MOUNT
stop ost1 -f || return 201
- stop mds -f || return 202
- stop mds -f || return 203
+ stop_mds -f || return 202
+ stop_mds -f || return 203
unload_modules || return 204
return $rc
}
test_42() { #bug 14693
setup
check_mount || return 2
- do_facet client lctl conf_param lustre.llite.some_wrong_param=10
+ do_facet mgs $LCTL conf_param lustre.llite.some_wrong_param=10
umount_client $MOUNT
mount_client $MOUNT || return 1
cleanup
}
run_test 42 "invalid config param should not prevent client from mounting"
+test_43() {
+ [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
+ setup
+ chmod ugo+x $DIR || error "chmod 0 failed"
+ set_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ "$FSNAME.mdt.root_squash" \
+ "0:0"
+ set_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ "$FSNAME.mdt.nosquash_nids" \
+ "NONE"
+
+ #
+ # create set of test files
+ #
+ echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
+ chmod go-rw $DIR/$tfile-userfile || error "chmod 1 failed"
+ chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
+
+ echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
+ chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
+
+ mkdir $DIR/$tdir-rootdir -p || error "mkdir failed"
+ chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
+ touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
+
+ #
+ # check root_squash:
+ # set root squash UID:GID to RUNAS_ID
+ # root should be able to access only files owned by RUNAS_ID
+ #
+ set_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ "$FSNAME.mdt.root_squash" \
+ "$RUNAS_ID:$RUNAS_ID"
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
+ dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
+ error "$ST: root read permission is denied"
+ echo "$ST: root read permission is granted - ok"
+
+ echo "444" | \
+ dd conv=notrunc if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
+ error "$ST: root write permission is denied"
+ echo "$ST: root write permission is granted - ok"
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
+ dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null && \
+ error "$ST: root read permission is granted"
+ echo "$ST: root read permission is denied - ok"
+
+ echo "555" | \
+ dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null && \
+ error "$ST: root write permission is granted"
+ echo "$ST: root write permission is denied - ok"
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
+ rm $DIR/$tdir-rootdir/tfile-1 1>/dev/null 2>/dev/null && \
+ error "$ST: root unlink permission is granted"
+ echo "$ST: root unlink permission is denied - ok"
+
+ touch $DIR/tdir-rootdir/tfile-2 1>/dev/null 2>/dev/null && \
+ error "$ST: root create permission is granted"
+ echo "$ST: root create permission is denied - ok"
+
+ #
+ # check nosquash_nids:
+ # put client's NID into nosquash_nids list,
+ # root should be able to access root file after that
+ #
+ local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
+ NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
+ NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
+ set_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ "$FSNAME-MDTall.mdt.nosquash_nids" \
+ "$NIDLIST"
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
+ dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
+ error "$ST: root read permission is denied"
+ echo "$ST: root read permission is granted - ok"
+
+ echo "666" | \
+ dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
+ error "$ST: root write permission is denied"
+ echo "$ST: root write permission is granted - ok"
+
+ ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
+ rm $DIR/$tdir-rootdir/tfile-1 || \
+ error "$ST: root unlink permission is denied"
+ echo "$ST: root unlink permission is granted - ok"
+ touch $DIR/$tdir-rootdir/tfile-2 || \
+ error "$ST: root create permission is denied"
+ echo "$ST: root create permission is granted - ok"
+
+ return 0
+}
+run_test 43 "check root_squash and nosquash_nids"
+
umount_client $MOUNT
cleanup_nocli
-cleanup_gss
+test_44() { # 16317
+ setup
+ check_mount || return 2
+ UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
+ STATS_FOUND=no
+ UUIDS=$(do_facet mds "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
+ for VAL in $UUIDS; do
+ NID=$(echo $VAL | cut -d= -f1)
+ CLUUID=$(echo $VAL | cut -d= -f2)
+ [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
+ done
+ [ "$STATS_FOUND" = "no" ] && error "stats not found for client"
+ cleanup
+ return 0
+}
+run_test 44 "mounted client proc entry exists"
+
+test_45() { #17310
+ setup
+ check_mount || return 2
+ stop_mds
+ df -h $MOUNT &
+ log "sleep 60 sec"
+ sleep 60
+#define OBD_FAIL_PTLRPC_LONG_UNLINK 0x50f
+ do_facet client "lctl set_param fail_loc=0x50f"
+ log "sleep 10 sec"
+ sleep 10
+ manual_umount_client --force || return 3
+ do_facet client "lctl set_param fail_loc=0x0"
+ start_mds
+ mount_client $MOUNT || return 4
+ cleanup
+ return 0
+}
+run_test 45 "long unlink handling in ptlrpcd"
+
+cleanup_46a() {
+ trap 0
+ local rc=0
+ local count=$1
+
+ umount_client $MOUNT2 || rc=$?
+ umount_client $MOUNT || rc=$?
+ while [ $count -gt 0 ]; do
+ stop ost${count} -f || rc=$?
+ let count=count-1
+ done
+ stop_mds || rc=$?
+ cleanup_nocli || rc=$?
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
+ return $rc
+}
+
+test_46a() {
+ echo "Testing with $OSTCOUNT OSTs"
+ reformat_and_config
+ start_mds || return 1
+ #first client should see only one ost
+ start_ost || return 2
+ wait_osc_import_state mds ost FULL
+ #start_client
+ mount_client $MOUNT || return 3
+ trap "cleanup_46a $OSTCOUNT" EXIT ERR
+
+ local i
+ for (( i=2; i<=$OSTCOUNT; i++ )); do
+ start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
+ done
+
+ # wait until osts in sync
+ for (( i=2; i<=$OSTCOUNT; i++ )); do
+ wait_osc_import_state mds ost$i FULL
+ done
+
+
+ #second client see all ost's
+
+ mount_client $MOUNT2 || return 8
+ $LFS setstripe $MOUNT2 -c -1 || return 9
+ $LFS getstripe $MOUNT2 || return 10
+
+ echo "ok" > $MOUNT2/widestripe
+ $LFS getstripe $MOUNT2/widestripe || return 11
+ # fill acl buffer for avoid expand lsm to them
+ awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd | while read acl; do
+ setfacl -m $acl $MOUNT2/widestripe
+ done
+
+ # will be deadlock
+ stat $MOUNT/widestripe || return 12
+
+ cleanup_46a $OSTCOUNT || { echo "cleanup_46a failed!" && return 13; }
+ return 0
+}
+run_test 46a "handle ost additional - wide striped file"
+
+test_47() { #17674
+ reformat
+ setup_noconfig
+ check_mount || return 2
+ $LCTL set_param ldlm.namespaces.$FSNAME-*-*-*.lru_size=100
+
+ local lru_size=[]
+ local count=0
+ for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
+ if echo $ns | grep "MDT[[:digit:]]*"; then
+ continue
+ fi
+ lrs=$(echo $ns | sed 's/.*lru_size=//')
+ lru_size[count]=$lrs
+ let count=count+1
+ done
+
+ facet_failover ost1
+ facet_failover $SINGLEMDS
+ client_up || return 3
+
+ count=0
+ for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
+ if echo $ns | grep "MDT[[:digit:]]*"; then
+ continue
+ fi
+ lrs=$(echo $ns | sed 's/.*lru_size=//')
+ if ! test "$lrs" -eq "${lru_size[count]}"; then
+ n=$(echo $ns | sed -e 's/ldlm.namespaces.//' -e 's/.lru_size=.*//')
+ error "$n has lost lru_size: $lrs vs. ${lru_size[count]}"
+ fi
+ let count=count+1
+ done
+
+ cleanup
+ return 0
+}
+run_test 47 "server restart does not make client loss lru_resize settings"
+
+cleanup_48() {
+ trap 0
+
+ # reformat after this test is needed - if test will failed
+ # we will have unkillable file at FS
+ reformat_and_config
+}
+
+test_48() { # bug 17636
+ reformat
+ setup_noconfig
+ check_mount || return 2
+
+ $LFS setstripe $MOUNT -c -1 || return 9
+ $LFS getstripe $MOUNT || return 10
+
+ echo "ok" > $MOUNT/widestripe
+ $LFS getstripe $MOUNT/widestripe || return 11
+
+ trap cleanup_48 EXIT ERR
+
+ # fill acl buffer for avoid expand lsm to them
+ getent passwd | awk -F : '{ print "u:"$1":rwx" }' | while read acl; do
+ setfacl -m $acl $MOUNT/widestripe
+ done
+
+ stat $MOUNT/widestripe || return 12
+
+ cleanup_48
+ return 0
+}
+run_test 48 "too many acls on file"
+
+# check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
+test_49() { # bug 17710
+ local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
+ local OLD_OST_MKFS_OPTS=$OST_MKFS_OPTS
+ local LOCAL_TIMEOUT=20
+
+
+ OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$LOCAL_TIMEOUT $MKFSOPT $OSTOPT"
+
+ reformat
+ setup_noconfig
+ check_mount || return 1
+
+ echo "check ldlm_timout..."
+ LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+ LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
+ LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+
+ if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+ error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
+ fi
+
+ if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT / 3)) ]; then
+ error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+ fi
+
+ umount_client $MOUNT
+ stop_ost || return 2
+ stop_mds || return 3
+
+ OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$((LOCAL_TIMEOUT - 1)) $MKFSOPT $OSTOPT"
+
+ reformat
+ setup_noconfig
+ check_mount || return 7
+
+ LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+ LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
+ LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+
+ if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+ error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
+ fi
+
+ if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT - 1)) ]; then
+ error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+ fi
+
+ cleanup || return $?
+
+ MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
+ OST_MKFS_OPTS=$OLD_OST_MKFS_OPTS
+}
+run_test 49 "check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE"
+
+lazystatfs() {
+ # Test both statfs and lfs df and fail if either one fails
+ multiop_bg_pause $1 f_
+ RC1=$?
+ PID=$!
+ killall -USR1 multiop
+ [ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
+ wait $PID || { RC1=$?; log "multiop return error "; }
+
+ $LFS df &
+ PID=$!
+ sleep 5
+ kill -s 0 $PID
+ RC2=$?
+ if [ $RC2 -eq 0 ]; then
+ kill -s 9 $PID
+ log "lazystatfs df failed"
+ fi
+
+ RC=0
+ [[ $RC1 -ne 0 || $RC2 -eq 0 ]] && RC=1
+ return $RC
+}
+
+test_50a() {
+ setup
+ lctl set_param llite.$FSNAME-*.lazystatfs=1
+ touch $DIR/$tfile
+
+ lazystatfs $MOUNT || error "lazystatfs failed but no down servers"
+
+ cleanup || return $?
+}
+run_test 50a "lazystatfs all servers available =========================="
+
+test_50b() {
+ setup
+ lctl set_param llite.$FSNAME-*.lazystatfs=1
+ touch $DIR/$tfile
+
+ # Wait for client to detect down OST
+ stop_ost || error "Unable to stop OST1"
+ wait_osc_import_state mds ost DISCONN
+
+ lazystatfs $MOUNT || error "lazystatfs should don't have returned EIO"
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_mds || error "Unable to stop MDS"
+}
+run_test 50b "lazystatfs all servers down =========================="
+
+test_50c() {
+ start_mds || error "Unable to start MDS"
+ start_ost || error "Unable to start OST1"
+ start_ost2 || error "Unable to start OST2"
+ mount_client $MOUNT || error "Unable to mount client"
+ lctl set_param llite.$FSNAME-*.lazystatfs=1
+ touch $DIR/$tfile
+
+ # Wait for client to detect down OST
+ stop_ost || error "Unable to stop OST1"
+ wait_osc_import_state mds ost DISCONN
+ lazystatfs $MOUNT || error "lazystatfs failed with one down server"
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_ost2 || error "Unable to stop OST2"
+ stop_mds || error "Unable to stop MDS"
+}
+run_test 50c "lazystatfs one server down =========================="
+
+test_50d() {
+ start_mds || error "Unable to start MDS"
+ start_ost || error "Unable to start OST1"
+ start_ost2 || error "Unable to start OST2"
+ mount_client $MOUNT || error "Unable to mount client"
+ lctl set_param llite.$FSNAME-*.lazystatfs=1
+ touch $DIR/$tfile
+
+ # Issue the statfs during the window where the client still
+ # belives the OST to be available but it is in fact down.
+ # No failure just a statfs which hangs for a timeout interval.
+ stop_ost || error "Unable to stop OST1"
+ lazystatfs $MOUNT || error "lazystatfs failed with one down server"
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_ost2 || error "Unable to stop OST2"
+ stop_mds || error "Unable to stop MDS"
+}
+run_test 50d "lazystatfs client/server conn race =========================="
+
+test_50e() {
+ local RC1
+ local pid
+
+ reformat_and_config
+ start_mds || return 1
+ #first client should see only one ost
+ start_ost || return 2
+ wait_osc_import_state mds ost FULL
+
+ # Wait for client to detect down OST
+ stop_ost || error "Unable to stop OST1"
+ wait_osc_import_state mds ost DISCONN
+
+ mount_client $MOUNT || error "Unable to mount client"
+ lctl set_param llite.$FSNAME-*.lazystatfs=0
+
+ multiop_bg_pause $MOUNT _f
+ RC1=$?
+ pid=$!
+
+ if [ $RC1 -ne 0 ]; then
+ log "multiop failed $RC1"
+ else
+ kill -USR1 $pid
+ sleep $(( $TIMEOUT+1 ))
+ kill -0 $pid
+ [ $? -ne 0 ] && error "process isn't sleep"
+ start_ost || error "Unable to start OST1"
+ wait $pid || error "statfs failed"
+ fi
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_ost || error "Unable to stop OST1"
+ stop_mds || error "Unable to stop MDS"
+}
+run_test 50e "normal statfs all servers down =========================="
+
+test_50f() {
+ local RC1
+ local pid
+ CONN_PROC="osc.$FSNAME-OST0001-osc-[M]*.ost_server_uuid"
+
+ start_mds || error "Unable to start mds"
+ #first client should see only one ost
+ start_ost || error "Unable to start OST1"
+ wait_osc_import_state mds ost FULL
+
+ start_ost2 || error "Unable to start OST2"
+ wait_osc_import_state mds ost2 FULL
+
+ # Wait for client to detect down OST
+ stop_ost2 || error "Unable to stop OST2"
+
+ wait_osc_import_state mds ost2 DISCONN
+ mount_client $MOUNT || error "Unable to mount client"
+ lctl set_param llite.$FSNAME-*.lazystatfs=0
+
+ multiop_bg_pause $MOUNT _f
+ RC1=$?
+ pid=$!
+
+ if [ $RC1 -ne 0 ]; then
+ log "lazystatfs multiop failed $RC1"
+ else
+ kill -USR1 $pid
+ sleep $(( $TIMEOUT+1 ))
+ kill -0 $pid
+ [ $? -ne 0 ] && error "process isn't sleep"
+ start_ost2 || error "Unable to start OST2"
+ wait $pid || error "statfs failed"
+ stop_ost2 || error "Unable to stop OST2"
+ fi
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_ost || error "Unable to stop OST1"
+ stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
+}
+run_test 50f "normal statfs one server in down =========================="
+
+test_50g() {
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
+ setup
+ start_ost2 || error "Unable to start OST2"
+ wait_osc_import_state mds ost2 FULL
+ wait_osc_import_state client ost2 FULL
+
+ local PARAM="${FSNAME}-OST0001.osc.active"
+
+ $LFS setstripe -c -1 $DIR/$tfile || error "Unable to lfs setstripe"
+ do_facet mgs $LCTL conf_param $PARAM=0 || error "Unable to deactivate OST"
+
+ umount_client $MOUNT || error "Unable to unmount client"
+ mount_client $MOUNT || error "Unable to mount client"
+ # This df should not cause a panic
+ df -k $MOUNT
+
+ do_facet mgs $LCTL conf_param $PARAM=1 || error "Unable to activate OST"
+ rm -f $DIR/$tfile
+ umount_client $MOUNT || error "Unable to unmount client"
+ stop_ost2 || error "Unable to stop OST2"
+ stop_ost || error "Unable to stop OST1"
+ stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
+}
+run_test 50g "deactivated OST should not cause panic====================="
+
+test_51() {
+ local LOCAL_TIMEOUT=20
+
+ reformat
+ setup_noconfig
+ check_mount || return 1
+
+ mkdir $MOUNT/d1
+ $LFS setstripe -c -1 $MOUNT/d1
+ #define OBD_FAIL_MDS_REINT_DELAY 0x142
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x142"
+ touch $MOUNT/d1/f1 &
+ local pid=$!
+ sleep 2
+ start_ost2 || return 2
+ wait $pid
+ stop_ost2 || return 3
+ cleanup
+}
+run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
+
+copy_files_xattrs()
+{
+ local node=$1
+ local dest=$2
+ local xattrs=$3
+ shift 3
+
+ do_node $node mkdir -p $dest
+ [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+ do_node $node 'tar cf - '$@' | tar xf - -C '$dest';
+ [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+ [ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
+
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
+ [ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
+}
+
+diff_files_xattrs()
+{
+ local node=$1
+ local backup=$2
+ local xattrs=$3
+ shift 3
+
+ local backup2=${TMP}/backup2
+
+ do_node $node mkdir -p $backup2
+ [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+ do_node $node 'tar cf - '$@' | tar xf - -C '$backup2';
+ [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+ [ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
+
+ do_node $node "diff -rq $backup $backup2"
+ [ $? -eq 0 ] || { error "contents differ"; return 3; }
+
+ local xattrs2=${TMP}/xattrs2
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
+ [ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
+
+ do_node $node "diff $xattrs $xattrs2"
+ [ $? -eq 0 ] || { error "xattrs differ"; return 5; }
+
+ do_node $node "rm -rf $backup2 $xattrs2"
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 6; }
+}
+
+test_52() {
+ start_mds
+ [ $? -eq 0 ] || { error "Unable to start MDS"; return 1; }
+ start_ost
+ [ $? -eq 0 ] || { error "Unable to start OST1"; return 2; }
+ mount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to mount client"; return 3; }
+
+ local nrfiles=8
+ local ost1mnt=${MOUNT%/*}/ost1
+ local ost1node=$(facet_active_host ost1)
+ local ost1tmp=$TMP/conf52
+
+ mkdir -p $DIR/$tdir
+ [ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
+ touch $TMP/modified_first
+ [ $? -eq 0 ] || { error "Unable to create temporary file"; return 5; }
+ local mtime=$(stat -c %Y $TMP/modified_first)
+ do_node $ost1node "mkdir -p $ost1tmp && touch -m -d @$mtime $ost1tmp/modified_first"
+
+ [ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
+ sleep 1
+
+ $LFS setstripe $DIR/$tdir -c -1 -s 1M
+ [ $? -eq 0 ] || { error "lfs setstripe failed"; return 7; }
+
+ for (( i=0; i < nrfiles; i++ )); do
+ multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c
+ [ $? -eq 0 ] || { error "multiop failed"; return 8; }
+ echo -n .
+ done
+ echo
+
+ # backup files
+ echo backup files to $TMP/files
+ local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
+ copy_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+ [ $? -eq 0 ] || { error "Unable to copy files"; return 9; }
+
+ umount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to umount client"; return 10; }
+ stop_ost
+ [ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
+
+ echo mount ost1 as ldiskfs
+ do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
+ [ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
+
+ # backup objects
+ echo backup objects to $ost1tmp/objects
+ local objects=$(do_node $ost1node 'find '$ost1mnt'/O/0 -type f -size +0'\
+ '-newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
+ copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+ [ $? -eq 0 ] || { error "Unable to copy objects"; return 13; }
+
+ # move objects to lost+found
+ do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
+ [ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
+
+ # recover objects
+ do_node $ost1node "ll_recover_lost_found_objs -d $ost1mnt/lost+found"
+ [ $? -eq 0 ] || { error "ll_recover_lost_found_objs failed"; return 15; }
+
+ # compare restored objects against saved ones
+ diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+ [ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
+
+ do_node $ost1node "umount $ost1_dev"
+ [ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
+
+ start_ost
+ [ $? -eq 0 ] || { error "Unable to start ost1"; return 18; }
+ mount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to mount client"; return 19; }
+
+ # compare files
+ diff_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+ [ $? -eq 0 ] || { error "Unable to diff files"; return 20; }
+
+ rm -rf $TMP/files $TMP/file_xattrs
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 21; }
+ do_node $ost1node "rm -rf $ost1tmp"
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 22; }
+ cleanup
+}
+run_test 52 "check recovering objects from lost+found"
+
+# Checks threads_min/max/started for some service
+#
+# Arguments: service name (OST or MDT), facet (e.g., ost1, $SINGLEMDS), and a
+# parameter pattern prefix like 'ost.*.ost'.
+thread_sanity() {
+ local modname=$1
+ local facet=$2
+ local parampat=$3
+ local opts=$4
+ local tmin
+ local tmin2
+ local tmax
+ local tmax2
+ local tstarted
+ local paramp
+ local msg="Insane $modname thread counts"
+ shift 4
+
+ setup
+ check_mount || return 41
+
+ # We need to expand $parampat, but it may match multiple parameters, so
+ # we'll pick the first one
+ if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
+ error "Couldn't expand ${parampat}.threads_min parameter name"
+ return 22
+ fi
+
+ # Remove the .threads_min part
+ paramp=${paramp%.threads_min}
+
+ # Check for sanity in defaults
+ tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+ tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started" || echo 0)
+ lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
+ lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= tmax ))' || return $?
+
+ # Check that we can lower min/max
+ do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin - 1))"
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 10))"
+ tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+ lassert 25 "$msg" '(($tmin2 == ($tmin - 1) && $tmax2 == ($tmax -10)))' || return $?
+
+ # Check that we can set min/max to the same value
+ do_facet $facet "lctl set_param ${paramp}.threads_min=$tmin"
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$tmin"
+ tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+ lassert 26 "$msg" '(($tmin2 == $tmin && $tmax2 == $tmin))' || return $?
+
+ # Check that we can't set max < min
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 1))"
+ tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+ lassert 27 "$msg" '(($tmin <= $tmax2))' || return $?
+
+ # We need to ensure that we get the module options desired; to do this
+ # we set LOAD_MODULES_REMOTE=true and we call setmodopts below.
+ LOAD_MODULES_REMOTE=true
+ cleanup
+ local oldvalue
+ setmodopts -a $modname "$opts" oldvalue
+
+ load_modules
+ setup
+ check_mount || return 41
+
+ # Restore previous setting of MODOPTS_*
+ setmodopts $modname "$oldvalue"
+
+ # Check that $opts took
+ tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min")
+ tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max")
+ tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started")
+ lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
+ cleanup
+
+ # Workaround a YALA bug where YALA expects that modules will remain
+ # loaded on the servers
+ LOAD_MODULES_REMOTE=false
+ load_modules
+ setup
+ cleanup
+}
+
+test_53a() {
+ thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads=64'
+}
+run_test 53a "check OSS thread count params"
+
+test_53b() {
+ thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads=64'
+}
+run_test 53b "check MDT thread count params"
+
+run_llverfs()
+{
+ local dir=$1
+ local partial_arg=""
+ local size=$(df -B G $dir | tail -1 | awk '{print $2}' | sed 's/G//') # Gb
+
+ # Run in partial (fast) mode if the size
+ # of a partition > 10 GB
+ [ $size -gt 10 ] && partial_arg="-p"
+
+ llverfs $partial_arg $dir
+}
+
+test_54a() {
+ do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1)
+ [ $? -eq 0 ] || error "llverdev failed!"
+ reformat_and_config
+}
+run_test 54a "llverdev"
+
+test_54b() {
+ setup
+ run_llverfs $MOUNT
+ [ $? -eq 0 ] || error "llverfs failed!"
+ cleanup
+}
+run_test 54b "llverfs"
+
+lov_objid_size()
+{
+ local max_ost_index=$1
+ echo -n $(((max_ost_index + 1) * 8))
+}
+
+test_55() {
+ local mdsdev=$(mdsdevname 1)
+ local ostdev=$(ostdevname 1)
+ local saved_opts=$OST_MKFS_OPTS
+
+ for i in 0 1023 2048
+ do
+ OST_MKFS_OPTS="$saved_opts --index $i"
+ reformat
+
+ setup_noconfig
+ stopall
+
+ setup
+ sync
+ echo checking size of lov_objid for ost index $i
+ LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" | grep ^User | awk '{print $6}')
+ if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
+ error "lov_objid size has to be $(lov_objid_size $i), not $LOV_OBJID_SIZE"
+ else
+ echo ok, lov_objid size is correct: $LOV_OBJID_SIZE
+ fi
+ stopall
+ done
+
+ OST_MKFS_OPTS=$saved_opts
+ reformat
+}
+run_test 55 "check lov_objid size"
+
+test_56() {
+ add mds1 $MDS_MKFS_OPTS --mkfsoptions='\"-J size=16\"' --reformat $(mdsdevname 1)
+ add ost1 $OST_MKFS_OPTS --index=1000 --reformat $(ostdevname 1)
+ add ost2 $OST_MKFS_OPTS --index=10000 --reformat $(ostdevname 2)
+
+ start_mds
+ start_ost
+ start_ost2 || error "Unable to start second ost"
+ mount_client $MOUNT || error "Unable to mount client"
+ echo ok
+ $LFS osts
+ stopall
+ reformat
+}
+run_test 56 "check big indexes"
+
+test_57() { # bug 22656
+ local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+ writeconf
+ do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
+ start_mgsmds
+ start_ost && error "OST registration from failnode should fail"
+ stop_mds
+ reformat
+}
+run_test 57 "initial registration from failnode should fail (should return errs)"
+
+count_osts() {
+ do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
+}
+
+test_59() {
+ start_mgsmds >> /dev/null
+ local C1=$(count_osts)
+ if [ $C1 -eq 0 ]; then
+ start_ost >> /dev/null
+ C1=$(count_osts)
+ fi
+ stopall
+ echo "original ost count: $C1 (expect > 0)"
+ [ $C1 -gt 0 ] || error "No OSTs in $FSNAME log"
+ start_mgsmds -o writeconf >> /dev/null || error "MDT start failed"
+ local C2=$(count_osts)
+ echo "after mdt writeconf count: $C2 (expect 0)"
+ [ $C2 -gt 0 ] && error "MDT writeconf should erase OST logs"
+ echo "OST start without writeconf should fail:"
+ start_ost >> /dev/null && error "OST start without writeconf didn't fail"
+ echo "OST start with writeconf should succeed:"
+ start_ost -o writeconf >> /dev/null || error "OST1 start failed"
+ local C3=$(count_osts)
+ echo "after ost writeconf count: $C3 (expect 1)"
+ [ $C3 -eq 1 ] || error "new OST writeconf should add:"
+ start_ost2 -o writeconf >> /dev/null || error "OST2 start failed"
+ local C4=$(count_osts)
+ echo "after ost2 writeconf count: $C4 (expect 2)"
+ [ $C4 -eq 2 ] || error "OST2 writeconf should add log"
+ stop_ost2 >> /dev/null
+ cleanup_nocli >> /dev/null
+}
+run_test 59 "writeconf mount option"
+
+
+if ! combined_mgs_mds ; then
+ stop mgs
+fi
+cleanup_gss
equals_msg `basename $0`: test complete
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true
+[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true