ONLY=${ONLY:-"$*"}
-# bug number for skipped test:
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
-# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-
-# bug number for skipped test:
-# a tool to create lustre filesystem images
-ALWAYS_EXCEPT="32newtarball $ALWAYS_EXCEPT"
-
SRCDIR=$(dirname $0)
-PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
-
PTLDEBUG=${PTLDEBUG:--1}
-SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-$(dirname $0)/..}
-RLUSTRE=${RLUSTRE:-$LUSTRE}
-export MULTIOP=${MULTIOP:-multiop}
-
. $LUSTRE/tests/test-framework.sh
init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
+
+# tool to create lustre filesystem images
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
+
+# bug number for skipped test: LU-11915
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110 115"
+# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
+
+if $SHARED_KEY; then
+ # bug number for skipped tests: LU-9795 (all below)
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 0 31 32a 32d 35a"
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 53a 53b 54b 76a 76b"
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76c 76d 78 103"
+fi
+
+if ! combined_mgs_mds; then
+ # bug number for skipped test: LU-11991 LU-11990
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 32a 32b 32c 32d 32e 66"
+ # bug number for skipped test: LU-9897 LU-12032
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 84 123F"
+fi
+
+# 8 22 40 165 (min)
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="45 69 106 111"
+
+build_test_filter
# use small MDS + OST size to speed formatting time
# do not use too small MDSSIZE/OSTSIZE, which affect the default journal size
STORED_MDSSIZE=$MDSSIZE
STORED_OSTSIZE=$OSTSIZE
MDSSIZE=200000
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] && MDSSIZE=400000
+[ "$mds1_FSTYPE" = zfs ] && MDSSIZE=400000
OSTSIZE=200000
-[ $(facet_fstype ost1) = "zfs" ] && OSTSIZE=400000
+[ "$ost1_FSTYPE" = zfs ] && OSTSIZE=400000
fs2mds_HOST=$mds_HOST
fs2ost_HOST=$ost_HOST
OSTDEV1_2=$fs2ost_DEV
OSTDEV2_2=$fs3ost_DEV
-if ! combined_mgs_mds; then
- # bug number for skipped test: LU-9860 LU-9860 LU-9860
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 43b 53b 54b"
- # bug number for skipped test: LU-9875 LU-9879 LU-9879 LU-9879 LU-9879
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 70e 80 84 87 100"
- # bug number for skipped test: LU-8110 LU-9879 LU-9879 LU-9879
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 102 104 105 107"
-fi
-
# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
fi
-[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test:
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT"
-# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-
-init_logging
-
#
require_dsh_mds || exit 0
require_dsh_ost || exit 0
-# 8 22 (min)"
-[ "$SLOW" = "no" ] && EXCEPT_SLOW="45 69"
-
assert_DIR
gen_config() {
start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
}
+stop_mdt_no_force() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on `facet_active_host $facet`"
+ stop $facet || return 97
+}
+
stop_mdt() {
local num=$1
local facet=mds$num
}
mount_client() {
- local MOUNTPATH=$1
- echo "mount $FSNAME on ${MOUNTPATH}....."
- zconf_mount $(hostname) $MOUNTPATH || return 96
-}
+ local mountpath=$1
+ local mountopt="$2"
-remount_client() {
- local mountopt="remount,$1"
- local MOUNTPATH=$2
- echo "remount '$1' lustre on ${MOUNTPATH}....."
- zconf_mount $(hostname) $MOUNTPATH "$mountopt" || return 96
+ echo "mount $FSNAME ${mountopt:+with opts $mountopt} on $mountpath....."
+ zconf_mount $HOSTNAME $mountpath $mountopt || return 96
}
umount_client() {
echo "setup double mount lustre success"
}
-build_test_filter
+generate_name() {
+ cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $1 | head -n 1
+}
if [ "$ONLY" == "setup" ]; then
setup
run_test 5e "delayed connect, don't crash (bug 10268)"
test_5f() {
- if combined_mgs_mds ; then
- skip "needs separate mgs and mds"
- return 0
- fi
+ combined_mgs_mds && skip "needs separate mgs and mds"
grep " $MOUNT " /etc/mtab &&
error false "unexpected entry in mtab before mount" && return 10
test_5g() {
modprobe lustre
- [ $(lustre_version_code client) -lt $(version_code 2.9.53) ] &&
- { skip "automount of debugfs missing before 2.9.53" && return 0; }
+ [ "$CLIENT_VERSION" -lt $(version_code 2.9.53) ] &&
+ skip "automount of debugfs missing before 2.9.53"
umount /sys/kernel/debug
$LCTL get_param -n devices | egrep -v "error" && \
error "lctl can't access debugfs data"
}
run_test 5g "handle missing debugfs"
+test_5h() {
+ setup
+
+ stop mds1
+ #define OBD_FAIL_MDS_FS_SETUP 0x135
+ do_facet mds1 "$LCTL set_param fail_loc=0x80000135"
+ start_mdt 1 && error "start mdt should fail"
+ start_mdt 1 || error "start mdt failed"
+ client_up || error "client_up failed"
+ cleanup
+}
+run_test 5h "start mdt failure at mdt_fs_setup()"
+
+test_5i() {
+ setup
+
+ stop mds1
+ #define OBD_FAIL_QUOTA_INIT 0xA05
+ do_facet mds1 "$LCTL set_param fail_loc=0x80000A05"
+ start_mdt 1 && error "start mdt should fail"
+ start_mdt 1 || error "start mdt failed"
+ client_up || error "client_up failed"
+ cleanup
+}
+run_test 5i "start mdt failure at mdt_quota_init()"
+
test_6() {
setup
manual_umount_client
#
test_17() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
setup
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
test_18() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
log "use file $MDSDEV with MIN=$MIN"
fi
- [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
+ [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS"
echo "mount mds with large journal..."
mount_client $MOUNT || error "mount_client $MOUNT failed"
check_mount || error "check_mount failed"
rm -f $DIR/$tfile || error "remove $DIR/$tfile failed."
- remount_client ro $MOUNT || error "remount_client with ro failed"
+ mount_client $MOUNT remount,ro || error "remount client with ro failed"
touch $DIR/$tfile && error "$DIR/$tfile created incorrectly"
[ -e $DIR/$tfile ] && error "$DIR/$tfile exists incorrectly"
- remount_client rw $MOUNT || error "remount_client with rw failed"
+ mount_client $MOUNT remount,rw || error "remount client with rw failed"
touch $DIR/$tfile || error "touch $DIR/$tfile failed"
MCNT=$(grep -c $MOUNT' ' /etc/mtab)
[ "$MCNT" -ne 1 ] && error "$MOUNT in /etc/mtab $MCNT times"
run_test 21c "start mds between two osts, stop mds last"
test_21d() {
- if combined_mgs_mds ; then
- skip "need separate mgs device" && return 0
- fi
- stopall
+ combined_mgs_mds && skip "need separate mgs device"
- reformat
+ stopall
+ reformat
start_mgs || error "unable to start MGS"
start_ost || error "unable to start OST1"
start_mds || error "MDS start failed"
wait_osc_import_state mds ost2 FULL
+ local zkeeper=${KEEP_ZPOOL}
+ stack_trap "KEEP_ZPOOL=$zkeeper" EXIT
+ KEEP_ZPOOL="true"
+
stop_ost || error "Unable to stop OST1"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
stop_mgs
#writeconf to remove all ost2 traces for subsequent tests
writeconf_or_reformat
+ KEEP_ZPOOL="${zkeeper}"
+
start_mgs || error "unable to start MGS"
}
run_test 21d "start mgs then ost and then mds"
test_21e() { # LU-5863
if [[ -z "$fs3ost_DEV" || -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
test_24b() {
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ combined_mgs_mds ||
+ skip "needs combined MGT and MDT device"
if [ -z "$fs2mds_DEV" ]; then
local dev=${SINGLEMDS}_dev
local MDSDEV=${!dev}
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --mgs --fsname=${FSNAME}2 \
--reformat $fs2mdsdev $fs2mdsvdev || exit 10
setup
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS &&
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && {
+ cleanup
error "start MDS should fail"
+ }
stop fs2mds -f
cleanup || error "cleanup failed with rc $?"
}
run_test 24b "Multiple MGSs on a single node (should return err)"
test_25() {
- setup
+ setup_noconfig
check_mount || error "check_mount failed"
local MODULES=$($LCTL modules | awk '{ print $2 }')
rmmod $MODULES 2>/dev/null || true
run_test 26 "MDT startup failure cleans LOV (should return errs)"
test_27a() {
+ cleanup
start_ost || error "Unable to start OST1"
start_mds || error "Unable to start MDS"
echo "Requeue thread should have started: "
ps -e | grep ll_cfg_requeue
- set_conf_param_and_check ost1 \
- "$LCTL get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" \
- "$FSNAME-OST0000.ost.client_cache_seconds" ||
- error "set_conf_param_and_check ost1 failed"
+ set_persistent_param_and_check ost1 \
+ "obdfilter.$FSNAME-OST0000.client_cache_seconds" \
+ "$FSNAME-OST0000.ost.client_cache_seconds"
cleanup_nocli || error "cleanup_nocli failed with rc $?"
}
run_test 27a "Reacquire MGS lock if OST started first"
test_27b() {
# FIXME. ~grev
- setup
+ setup_noconfig
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
facet_failover $SINGLEMDS
- set_conf_param_and_check $SINGLEMDS \
- "$LCTL get_param -n mdt.$device.identity_acquire_expire" \
- "$device.mdt.identity_acquire_expire" ||
- error "set_conf_param_and_check $SINGLEMDS failed"
- set_conf_param_and_check client \
- "$LCTL get_param -n mdc.$device-mdc-*.max_rpcs_in_flight"\
- "$device.mdc.max_rpcs_in_flight" ||
- error "set_conf_param_and_check client failed"
+ set_persistent_param_and_check $SINGLEMDS \
+ "mdt.$device.identity_acquire_expire" \
+ "$device.mdt.identity_acquire_expire"
+ set_persistent_param_and_check client \
+ "mdc.$device-mdc-*.max_rpcs_in_flight" \
+ "$device.mdc.max_rpcs_in_flight"
check_mount
cleanup || error "cleanup failed with $?"
}
run_test 27b "Reacquire MGS lock after failover"
test_28A() { # was test_28
- setup
- TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
- PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
- ORIG=$($TEST)
- FINAL=$(($ORIG + 1))
- set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
- error "first set_conf_param_and_check client failed"
- FINAL=$(($FINAL + 1))
- set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
- error "second set_conf_param_and_check client failed"
+ setup_noconfig
+
+ local TEST="llite.$FSNAME-*.max_read_ahead_whole_mb"
+ local PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
+ local orig=$($LCTL get_param -n $TEST)
+ local max=$($LCTL get_param -n \
+ llite.$FSNAME-*.max_read_ahead_per_file_mb)
+
+ orig=${orig%%.[0-9]*}
+ max=${max%%.[0-9]*}
+ echo "ORIG:$orig MAX:$max"
+ [[ $max -le $orig ]] && orig=$((max - 3))
+ echo "ORIG:$orig MAX:$max"
+
+ local final=$((orig + 1))
+
+ set_persistent_param_and_check client "$TEST" "$PARAM" $final
+ final=$((final + 1))
+ set_persistent_param_and_check client "$TEST" "$PARAM" $final
umount_client $MOUNT || error "umount_client $MOUNT failed"
mount_client $MOUNT || error "mount_client $MOUNT failed"
- RESULT=$($TEST)
- if [ $RESULT -ne $FINAL ]; then
- error "New config not seen: wanted $FINAL got $RESULT"
+
+ local result=$($LCTL get_param -n $TEST)
+
+ if [ $result -ne $final ]; then
+ error "New config not seen: wanted $final got $result"
else
- echo "New config success: got $RESULT"
+ echo "New config success: got $result"
fi
- set_conf_param_and_check client "$TEST" "$PARAM" $ORIG ||
- error "third set_conf_param_and_check client failed"
+ set_persistent_param_and_check client "$TEST" "$PARAM" $orig
cleanup || error "cleanup failed with rc $?"
}
run_test 28A "permanent parameter setting"
test_28a() { # LU-4221
- [[ $(lustre_version_code ost1) -ge $(version_code 2.5.52) ]] ||
- { skip "Need OST version at least 2.5.52" && return 0; }
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-4221: no such proc params for ZFS OSTs" && return
+ [[ "$OST1_VERSION" -ge $(version_code 2.5.52) ]] ||
+ skip "Need OST version at least 2.5.52"
+ [ "$ost1_FSTYPE" = zfs ] &&
+ skip "LU-4221: no such proc params for ZFS OSTs"
local name
local param
local new
local device="$FSNAME-OST0000"
- setup
+ setup_noconfig
# In this test we will set three kinds of proc parameters with
- # lctl conf_param:
- # 1. the ones moved from the OFD to the OSD, and only their
- # symlinks kept in obdfilter
- # 2. non-symlink ones in the OFD
- # 3. non-symlink ones in the OSD
+ # lctl set_param -P or lctl conf_param:
+ # 1. non-symlink ones in the OFD
+ # 2. non-symlink ones in the OSD
# Check 1.
- # prepare a symlink parameter in the OFD
- name="writethrough_cache_enable"
- param="$device.ost.$name"
- cmd="$LCTL get_param -n obdfilter.$device.$name"
-
- # conf_param the symlink parameter in the OFD
- old=$(do_facet ost1 $cmd)
- new=$(((old + 1) % 2))
- set_conf_param_and_check ost1 "$cmd" "$param" $new ||
- error "lctl conf_param $device.ost.$param=$new failed"
-
- # conf_param the target parameter in the OSD
- param="$device.osd.$name"
- cmd="$LCTL get_param -n osd-*.$device.$name"
- set_conf_param_and_check ost1 "$cmd" "$param" $old ||
- error "lctl conf_param $device.osd.$param=$old failed"
-
- # Check 2.
# prepare a non-symlink parameter in the OFD
name="client_cache_seconds"
param="$device.ost.$name"
- cmd="$LCTL get_param -n obdfilter.$device.$name"
+ cmd="obdfilter.$device.$name"
- # conf_param the parameter in the OFD
- old=$(do_facet ost1 $cmd)
+ # permanently setting the parameter in the OFD
+ old=$(do_facet ost1 $LCTL get_param -n $cmd)
new=$((old * 2))
- set_conf_param_and_check ost1 "$cmd" "$param" $new ||
- error "lctl conf_param $device.ost.$param=$new failed"
- set_conf_param_and_check ost1 "$cmd" "$param" $old ||
- error "lctl conf_param $device.ost.$param=$old failed"
+ set_persistent_param_and_check ost1 "$cmd" "$param" $new
+ set_persistent_param_and_check ost1 "$cmd" "$param" $old
- # Check 3.
+ # Check 2.
# prepare a non-symlink parameter in the OSD
name="auto_scrub"
param="$device.osd.$name"
- cmd="$LCTL get_param -n osd-*.$device.$name"
+ cmd="osd-*.$device.$name"
# conf_param the parameter in the OSD
- old=$(do_facet ost1 $cmd)
+ old=$(do_facet ost1 $LCTL get_param -n $cmd)
new=$(((old + 1) % 2))
- set_conf_param_and_check ost1 "$cmd" "$param" $new ||
- error "lctl conf_param $device.osd.$param=$new failed"
- set_conf_param_and_check ost1 "$cmd" "$param" $old ||
- error "lctl conf_param $device.osd.$param=$old failed"
+ set_persistent_param_and_check ost1 "$cmd" "$param" $new
+ set_persistent_param_and_check ost1 "$cmd" "$param" $old
cleanup || error "cleanup failed with $?"
}
-run_test 28a "set symlink parameters permanently with conf_param"
+run_test 28a "set symlink parameters permanently with lctl"
test_29() {
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs" && return
- setup > /dev/null 2>&1
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >= 2 OSTs"
+ setup_noconfig > /dev/null 2>&1
start_ost2 || error "Unable to start OST2"
sleep 10
local PARAM="$FSNAME-OST0001.osc.active"
- local PROC_ACT="osc.$FSNAME-OST0001-osc-[^M]*.active"
- local PROC_UUID="osc.$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
-
- ACTV=$($LCTL get_param -n $PROC_ACT)
+ # With lctl set_param -P the value $PROC_ACT will be sent to
+ # all nodes. The [!M] filter out the ability to set active
+ # on the MDS servers which is tested with wait_osp_* below.
+ # For ost_server_uuid that only exist on client so filtering
+ # is safe.
+ local PROC_ACT="os[cp].$FSNAME-OST0001-osc-[^M]*.active"
+ local PROC_UUID="os[cp].$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
+
+ ACTV=$($LCTL get_param -n $PROC_ACT)
DEAC=$((1 - $ACTV))
- set_conf_param_and_check client \
- "$LCTL get_param -n $PROC_ACT" "$PARAM" $DEAC ||
- error "set_conf_param_and_check client failed"
+ set_persistent_param_and_check client $PROC_ACT $PARAM $DEAC
# also check ost_server_uuid status
RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV)
if [ -z "$RESULT" ]; then
# test new client starts deactivated
umount_client $MOUNT || error "umount_client $MOUNT failed"
mount_client $MOUNT || error "mount_client $MOUNT failed"
- RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
- if [ -z "$RESULT" ]; then
- error "New client start active: $(lctl get_param -n $PROC_UUID)"
- else
- echo "New client success: got $RESULT"
- fi
+
+ # the 2nd and 3rd field of ost_server_uuid do not update at the same
+ # time when using lctl set_param -P
+ wait_update_facet client \
+ "$LCTL get_param -n $PROC_UUID | awk '{print \\\$3 }'" \
+ "DEACTIVATED" ||
+ error "New client start active: $($LCTL get_param -n $PROC_UUID)"
+
+ echo "New client success: got '$($LCTL get_param -n $PROC_UUID)'"
# make sure it reactivates
- set_conf_param_and_check client \
- "$LCTL get_param -n $PROC_ACT" "$PARAM" $ACTV ||
- error "lctl get_param $PROC_ACT $PARAM $ACTV failed"
+ set_persistent_param_and_check client $PROC_ACT $PARAM $ACTV
umount_client $MOUNT
stop_ost2 || error "Unable to stop OST2"
run_test 29 "permanently remove an OST"
test_30a() {
- setup
+ setup_noconfig
echo Big config llog
- TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
- ORIG=$($TEST)
+ TEST="llite.$FSNAME-*.max_read_ahead_whole_mb"
+ ORIG=$($LCTL get_param -n $TEST)
LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
for i in ${LIST[@]}; do
- set_conf_param_and_check client "$TEST" \
- "$FSNAME.llite.max_read_ahead_whole_mb" $i ||
- error "Set $FSNAME.llite.max_read_ahead_whole_mb failed"
+ set_persistent_param_and_check client "$TEST" \
+ "$FSNAME.llite.max_read_ahead_whole_mb" $i
done
# make sure client restart still works
umount_client $MOUNT
mount_client $MOUNT || error "mount_client $MOUNT failed"
- [ "$($TEST)" -ne "$i" ] &&
+ [ "$($LCTL get_param -n $TEST)" -ne "$i" ] &&
error "Param didn't stick across restart $($TEST) != $i"
pass
echo Erase parameter setting
- do_facet mgs "$LCTL conf_param \
- -d $FSNAME.llite.max_read_ahead_whole_mb" ||
- error "Erase param $FSNAME.llite.max_read_ahead_whole_mb failed"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ do_facet mgs "$PERM_CMD -d $TEST" ||
+ error "Erase param $TEST failed"
+ else
+ do_facet mgs "$PERM_CMD \
+ -d $FSNAME.llite.max_read_ahead_whole_mb" ||
+ error "Erase param $FSNAME.llite.max_read_ahead_whole_mb failed"
+ fi
umount_client $MOUNT
mount_client $MOUNT || error "mount_client $MOUNT failed"
- FINAL=$($TEST)
+ FINAL=$($LCTL get_param -n $TEST)
echo "deleted (default) value=$FINAL, orig=$ORIG"
+ ORIG=${ORIG%%.[0-9]*}
+ FINAL=${FINAL%%.[0-9]*}
# assumes this parameter started at the default value
[ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
cleanup || error "cleanup failed with rc $?"
}
-run_test 30a "Big config llog and conf_param deletion"
+run_test 30a "Big config llog and permanent parameter deletion"
test_30b() {
- setup
+ setup_noconfig
local orignids=$($LCTL get_param -n \
osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
local TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
- set_conf_param_and_check client "$TEST" \
- "$FSNAME-OST0000.failover.node" $NEW ||
- error "didn't add failover nid $NEW"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ PARAM="osc.$FSNAME-OST0000-osc-[^M]*.import"
+ echo "Setting $PARAM from $TEST to $NEW"
+ do_facet mgs "$PERM_CMD $PARAM='connection=$NEW'" ||
+ error "$PERM_CMD $PARAM failed"
+ else
+ PARAM="$FSNAME-OST0000.failover.node"
+ echo "Setting $PARAM from $TEST to $NEW"
+ do_facet mgs "$PERM_CMD $PARAM='$NEW'" ||
+ error "$PARAM $PARAM failed"
+ fi
+ wait_update_facet client "$TEST" "$NEW" ||
+ error "check $PARAM failed!"
+
local NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids)
- echo $NIDS
local NIDCOUNT=$(echo "$NIDS" | wc -w)
echo "should have $((orignidcount + 1)) entries \
in failover nids string, have $NIDCOUNT"
[ $NIDCOUNT -eq $((orignidcount + 1)) ] ||
error "Failover nid not added"
- do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" ||
- error "conf_param delete failed"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ do_facet mgs "$PERM_CMD -d osc.$FSNAME-OST0000-osc-*.import"
+ else
+ do_facet mgs "$PERM_CMD -d $FSNAME-OST0000.failover.node" ||
+ error "$PERM_CMD delete failed"
+ fi
umount_client $MOUNT
mount_client $MOUNT || error "mount_client $MOUNT failed"
NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
grep failover_nids)
- echo $NIDS
NIDCOUNT=$(echo "$NIDS" | wc -w)
echo "only $orignidcount final entries should remain \
in failover nids string, have $NIDCOUNT"
local dst=.
local src=/etc/rc.d
local tmp=$TMP/t32_image_create
- local server_version=$(lustre_version_code $SINGLEMDS)
local remote_dir
local striped_dir
local pushd_dir
setupall
- [[ $server_version -ge $(version_code 2.3.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.3.50) ]] ||
$LFS quotacheck -ug /mnt/$FSNAME
$LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
/mnt/$FSNAME
$LFS mkdir -i 1 $remote_dir
tar cf - -C $tmp/src . | tar xf - -C $remote_dir
- if [[ $server_version -ge $(version_code 2.7.0) ]]; then
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
striped_dir=/mnt/$FSNAME/striped_dir_old
$LFS mkdir -i 1 -c 2 $striped_dir
tar cf - -C $tmp/src . | tar xf - -C $striped_dir
pushd_dir=/mnt/$FSNAME
if [[ $MDSCOUNT -ge 2 ]]; then
pushd_dir=$remote_dir
- if [[ $server_version -ge $(version_code 2.7.0) ]]; then
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
pushd $striped_dir
ls -Rni --time-style=+%s >$tmp/img/list2
popd
$LCTL get_param -n version | head -n 1 |
sed -e 's/^lustre: *//' >$tmp/img/commit
- [[ $server_version -ge $(version_code 2.3.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.3.50) ]] ||
$LFS quotaon -ug /mnt/$FSNAME
$LFS quota -u $T32_QID -v /mnt/$FSNAME
$LFS quota -v -u $T32_QID /mnt/$FSNAME |
echo $T32_BLIMIT > $tmp/img/blimit
echo $T32_ILIMIT > $tmp/img/ilimit
+ $MULTIOP /mnt/$FSNAME/orph_file Ouw_c&
+ pid=$!
+ sync
+ stop_mdt_no_force 1
+ debugfs -R "ls /PENDING" ${MDSDEV1:-$MDSDEV}
+ cp ${MDSDEV1:-$MDSDEV} $tmp/img
+ start_mdt 1
+ kill -s USR1 $pid
+ wait $pid
+
stopall
pushd $tmp/src
uname -r >$tmp/img/kernel
uname -m >$tmp/img/arch
- mv ${MDSDEV1:-$MDSDEV} $tmp/img
for num in $(seq 2 $MDSCOUNT); do
local devname=$(mdsdevname $num)
local facet=mds$num
sed -e 's/\./_/g') # E.g., "1.8.7" -> "1_8"
dst=$(cd $dst; pwd)
pushd $tmp/img
- tar cjvf $dst/disk$version-$(facet_fstype $SINGLEMDS).tar.bz2 -S *
+ tar cjvf $dst/disk$version-"$mds1_FSTYPE".tar.bz2 -S *
popd
rm -r $tmp
# variable "tarballs".
#
t32_check() {
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
- if [ "$CLIENTONLY" ]; then
- skip "Client-only testing"
- exit 0
- fi
-
- if ! $r which $TUNEFS; then
- skip_env "tunefs.lustre required on $node"
- exit 0
- fi
+ ! $r which "$TUNEFS" && skip_env "tunefs.lustre required on $node"
- local IMGTYPE=$(facet_fstype $SINGLEMDS)
+ local IMGTYPE="$mds1_FSTYPE"
tarballs=$($r find $RLUSTRE/tests -maxdepth 1 \
-name \'disk*-$IMGTYPE.tar.bz2\')
- if [ -z "$tarballs" ]; then
- skip "No applicable tarballs found"
- exit 0
- fi
+ [ -z "$tarballs" ] && skip "No applicable tarballs found"
}
t32_test_cleanup() {
local tmp=$TMP/t32
local facet=$SINGLEMDS
- local fstype=$(facet_fstype $facet)
local rc=$?
if $shall_cleanup_lustre; then
$r rm -rf $tmp
rm -rf $tmp
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
local poolname
local poolname_list="t32fs-mdt1 t32fs-ost1"
local node=$1
local all_removed=false
local i=0
- local fstype=$(facet_fstype $SINGLEMDS)
- [ $fstype == "zfs" ] && do_rpc_nodes $node "service zed stop"
+ [ "$mds1_FSTYPE" == zfs ] && do_rpc_nodes $node "service zed stop"
while ((i < 20)); do
echo "Unloading modules on $node: Attempt $i"
- do_rpc_nodes $node $LUSTRE_RMMOD $fstype &&
+ do_rpc_nodes $node $LUSTRE_RMMOD "$mds1_FSTYPE" &&
all_removed=true
do_rpc_nodes $node check_mem_leak || return 1
if $all_removed; then
do_rpc_nodes $node load_modules
return 0
fi
- if [ $fstype == "zfs" ]; then
+ if [ "$mds1_FSTYPE" == zfs ]; then
do_rpc_nodes $node "$ZPOOL status -v"
fi
sleep 5
}
t32_verify_quota() {
- local node=$1
+ local facet=$1
local fsname=$2
local mnt=$3
- local fstype=$(facet_fstype $SINGLEMDS)
local qval
local cmd
# lustre will estimate the object count usage. This fails quota
# verification in 32b. The object quota usage should be accurate after
# zfs-0.7.0 is released.
- [ $fstype == "zfs" ] && {
- local zfs_version=$(do_node $node cat /sys/module/zfs/version)
+ [ "$mds1_FSTYPE" == zfs ] && {
+ local zfs_version=$(do_facet $facet cat /sys/module/zfs/version)
[ $(version_code $zfs_version) -lt $(version_code 0.7.0) ] && {
echo "Skip quota verify for zfs: $zfs_version"
return 1
}
- do_node $node $LCTL conf_param $fsname.quota.mdt=ug
- cmd="$LCTL get_param -n osd-$fstype.$fsname-MDT0000"
- cmd=$cmd.quota_slave.enabled
- wait_update $node "$cmd" "ug" || {
- echo "Enable mdt quota failed"
- return 1
- }
+ set_persistent_param_and_check $facet \
+ "osd-$mds1_FSTYPE.$fsname-MDT0000.quota_slave.enabled" \
+ "$fsname.quota.mdt" ug
- do_node $node $LCTL conf_param $fsname.quota.ost=ug
- cmd="$LCTL get_param -n osd-$fstype.$fsname-OST0000"
- cmd=$cmd.quota_slave.enabled
- wait_update $node "$cmd" "ug" || {
- echo "Enable ost quota failed"
- return 1
- }
+ set_persistent_param_and_check $facet \
+ "osd-$mds1_FSTYPE.$fsname-OST0000.quota_slave.enabled" \
+ "$fsname.quota.ost" ug
chmod 0777 $mnt
runas -u $T32_QID -g $T32_QID dd if=/dev/zero of=$mnt/t32_qf_new \
local nrpcs_orig
local nrpcs
local list
- local fstype=$(facet_fstype $SINGLEMDS)
local mdt_dev=$tmp/mdt
local mdt2_dev=$tmp/mdt2
local ost_dev=$tmp/ost
# - ost device img version < 2.3.64
# - ost server version >= 2.5
[ $(version_code $img_commit) -ge $(version_code 2.3.64) -o \
- $(lustre_version_code ost1) -lt $(version_code 2.5.0) ] &&
+ "$OST1_VERSION" -lt $(version_code 2.5.0) ] &&
ff_convert="no"
! $r test -f $mdt2_dev || mdt2_is_available=true
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
# import pool first
local poolname
local poolname_list="t32fs-mdt1 t32fs-ost1"
if [ "$writeconf" ]; then
mopts=writeconf
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
$r $TUNEFS --quota $mdt_dev || {
$r losetup -a
fi
else
if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
- [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
- { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
- "(Need MGS version at least 2.3.59)"; return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.3.59) ]] ||
+ skip "LU-2200: Cannot run over IB w/o lctl replace_nids "
+ "(Need MGS version at least 2.3.59)"
local osthost=$(facet_active_host ost1)
local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
mopts=nosvc
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
$r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
fi
mopts=exclude=$fsname-OST0000
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
fi
local fs2mdsvdev=$(mdsvdevname 1_2)
echo "mkfs new MDT on ${fs2mdsdev}...."
- if [ $(facet_fstype mds1) == ldiskfs ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
return 1
}
- [[ $(facet_fstype mds1) != zfs ]] || import_zpool mds1
+ [[ "$mds1_FSTYPE" != zfs ]] || import_zpool mds1
$r $TUNEFS --dryrun $fs2mdsdev || {
error_noexit "tunefs.lustre before mounting the MDT"
}
if [ "$writeconf" ]; then
mopts=mgsnode=$nid,$writeconf
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
$r $TUNEFS --quota $ost_dev || {
$r losetup -a
fi
else
mopts=mgsnode=$nid
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
fi
return 1
fi
- $r $LCTL conf_param $fsname-OST0000.osc.max_dirty_mb=15 || {
- error_noexit "Setting \"max_dirty_mb\""
- return 1
- }
- $r $LCTL conf_param $fsname-OST0000.failover.node=$nid || {
- error_noexit "Setting OST \"failover.node\""
- return 1
- }
- $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=9 || {
- error_noexit "Setting \"max_rpcs_in_flight\""
- return 1
- }
- $r $LCTL conf_param $fsname-MDT0000.failover.node=$nid || {
- error_noexit "Setting MDT \"failover.node\""
- return 1
- }
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ $r $PERM_CMD osc.$fsname-OST0000*.import=connection=$nid || {
+ error_noexit "Setting OST \"failover.node\""
+ return 1
+ }
+ $r $PERM_CMD mdc.$fsname-MDT0000*.import=connection=$nid || {
+ error_noexit "Setting MDT \"failover.node\""
+ return 1
+ }
+ $r $PERM_CMD osc.$fsname-OST0000-*.max_dirty_mb=15 || {
+ error_noexit "Setting \"max_dirty_mb\""
+ return 1
+ }
+ $r $PERM_CMD mdc.$fsname-MDT0000-*.max_rpcs_in_flight=9 || {
+ error_noexit "Setting \"max_rpcs_in_flight\""
+ return 1
+ }
+ $r $PERM_CMD lov.$fsname-MDT0000-*.stripesize=4M || {
+ error_noexit "Setting \"lov.stripesize\""
+ return 1
+ }
+ $r $PERM_CMD mdd.$fsname-MDT0000-*.atime_diff=70 || {
+ error_noexit "Setting \"mdd.atime_diff\""
+ return 1
+ }
+ else
+ $r $PERM_CMD $fsname-OST0000.failover.node=$nid || {
+ error_noexit "Setting OST \"failover.node\""
+ return 1
+ }
+
+ $r $PERM_CMD $fsname-MDT0000.failover.node=$nid || {
+ error_noexit "Setting MDT \"failover.node\""
+ return 1
+ }
+
+ $r $PERM_CMD $fsname-OST0000.osc.max_dirty_mb=15 || {
+ error_noexit "Setting \"max_dirty_mb\""
+ return 1
+ }
+ $r $PERM_CMD $fsname-MDT0000.mdc.max_rpcs_in_flight=9 || {
+ error_noexit "Setting \"max_rpcs_in_flight\""
+ return 1
+ }
+ $r $PERM_CMD $fsname-MDT0000.lov.stripesize=4M || {
+ error_noexit "Setting \"lov.stripesize\""
+ return 1
+ }
+ $r $PERM_CMD $fsname-MDT0000.mdd.atime_diff=70 || {
+ error_noexit "Setting \"mdd.atime_diff\""
+ return 1
+ }
+ fi
+
$r $LCTL pool_new $fsname.interop || {
error_noexit "Setting \"interop\""
return 1
}
- $r $LCTL conf_param $fsname-MDT0000.lov.stripesize=4M || {
- error_noexit "Setting \"lov.stripesize\""
- return 1
- }
- $r $LCTL conf_param $fsname-MDT0000.mdd.atime_diff=70 || {
- error_noexit "Setting \"mdd.atime_diff\""
- return 1
- }
- if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
+ if [ "$ff_convert" != "no" -a "$ost1_FSTYPE" == ldiskfs ]; then
$r $LCTL lfsck_start -M $fsname-OST0000 || {
error_noexit "Start OI scrub on OST0"
return 1
fi
if [ "$dne_upgrade" != "no" ]; then
- $r $LCTL conf_param \
- $fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
- error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
- return 1
- }
- $r $LCTL conf_param $fsname-MDT0001.failover.node=$nid || {
- error_noexit "Setting MDT1 \"failover.node\""
- return 1
- }
- $r $LCTL conf_param $fsname-MDT0001.lov.stripesize=4M || {
- error_noexit "Setting MDT1 \"lov.stripesize\""
- return 1
- }
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ $r $PERM_CMD mdc.$fsname-MDT0001*.import=connection=$nid || {
+ error_noexit "Setting MDT1 \"failover.node\""
+ return 1
+ }
+
+ $r $PERM_CMD mdc.$fsname-MDT0001-*.max_rpcs_in_flight=9 || {
+ error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
+ return 1
+ }
+ $r $PERM_CMD lov.$fsname-MDT0001-*.stripesize=4M || {
+ error_noexit "Setting MDT1 \"lov.stripesize\""
+ return 1
+ }
+ else
+ $r $PERM_CMD $fsname-MDT0001.failover.node=$nid || {
+ error_noexit "Setting MDT1 \"failover.node\""
+ return 1
+ }
+ $r $PERM_CMD $fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
+ error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
+ return 1
+ }
+ $r $PERM_CMD $fsname-MDT0001.lov.stripesize=4M || {
+ error_noexit "Setting MDT1 \"lov.stripesize\""
+ return 1
+ }
+ fi
fi
if [ "$writeconf" ]; then
shall_cleanup_lustre=true
$r $LCTL set_param debug="$PTLDEBUG"
+ # Leave re-enabling this to a separate patch for LU-11558
+ # t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
+ # error_noexit "verify quota failed"
+ # return 1
+ #}
+
if $r test -f $tmp/list; then
#
# There is not a Test Framework API to copy files to or
}
rm $tmp/mnt/lustre/dom
- $r $LCTL get_param -n lod.*MDT0000*.dom_stripesize || {
- error_noexit "Getting \"dom_stripesize\""
- return 1
- }
- $r $LCTL conf_param \
- $fsname-MDT0000.lod.dom_stripesize=0 || {
+ set_persistent_param_and_check mds \
+ "lod.*MDT0000*.dom_stripesize" \
+ "$fsname-MDT0000.lod.dom_stripesize" 0 || {
error_noexit "Changing \"dom_stripesize\""
return 1
}
- wait_update $(facet_host mds) "$LCTL get_param \
- -n lod.*MDT0000*.dom_stripesize" 0 || {
- error_noexit "Verifying \"dom_stripesize\""
- return 1
- }
fi
if [ "$dne_upgrade" != "no" ]; then
$LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
pushd $tmp/mnt/lustre
- tar -cf - . --exclude=./striped_dir \
- --exclude=./striped_dir_old \
- --exclude=./remote_dir |
+ tar -c --exclude=./striped_dir \
+ --exclude=./striped_dir_old \
+ --exclude=./remote_dir -f - .|
tar -xvf - -C striped_dir 1>/dev/null || {
error_noexit "cp to striped dir failed"
return 1
fi
# migrate files/dirs to remote MDT, then move them back
- if [ $(lustre_version_code mds1) -ge $(version_code 2.7.50) -a \
+ if [ "$MDS1_VERSION" -ge $(version_code 2.7.50) -a \
$dne_upgrade != "no" ]; then
$r $LCTL set_param -n \
mdt.${fsname}*.enable_remote_dir=1 2>/dev/null
return 1
}
nrpcs=$((nrpcs_orig + 5))
- $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=$nrpcs || {
+
+ set_persistent_param_and_check client \
+ "mdc.$fsname-MDT0000*.max_rpcs_in_flight" \
+ "$fsname-MDT0000.mdc.max_rpcs_in_flight" $nrpcs || {
error_noexit "Changing \"max_rpcs_in_flight\""
return 1
}
- wait_update $HOSTNAME "$LCTL get_param \
- -n mdc.*MDT0000*.max_rpcs_in_flight" $nrpcs || {
- error_noexit "Verifying \"max_rpcs_in_flight\""
- return 1
- }
umount $tmp/mnt/lustre || {
error_noexit "Unmounting the client"
}
shall_cleanup_lustre=false
else
+ $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
+ error_noexit "Mounting the client"
+ return 1
+ }
+
+ [[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) == 0 ]] ||
+ error "MDD orphan cleanup thread not quit"
+
+ umount $tmp/mnt/lustre || {
+ error_noexit "Unmounting the client"
+ return 1
+ }
+
if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
$r $UMOUNT $tmp/mnt/mdt1 || {
error_noexit "Unmounting the MDT2"
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
$r "$ZPOOL export t32fs-mdt2"
fi
shall_cleanup_mdt1=false
error_noexit "Unmounting the MDT"
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
$r "$ZPOOL export t32fs-mdt1"
fi
shall_cleanup_mdt=false
error_noexit "Unmounting the OST"
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
$r "$ZPOOL export t32fs-ost1"
fi
shall_cleanup_ost=false
return 1
}
- if [[ $fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
local poolname=t32fs-mdt1
$r "modprobe zfs;
$ZPOOL list -H $poolname >/dev/null 2>&1 ||
}
mopts=exclude=$fsname-OST0000
- if [ $fstype == "ldiskfs" ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
fi
$r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade"
t32_test $tarball || let "rc += $?"
done
return $rc
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade with writeconf"
t32_test $tarball writeconf || let "rc += $?"
done
return $rc
local tarball
local rc=0
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
t32_check
for tarball in $tarballs; do
# Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
- echo $tarball | grep "1_8" && continue
- echo $tarball | grep "2_1" && continue
+ [[ "$tarball" =~ "1_8" ]] && echo "skip $tarball" && continue
+ [[ "$tarball" =~ "2_1" ]] && echo "skip $tarball" && continue
+ banner "testing $tarball upgrade with DNE"
load_modules
dne_upgrade=yes t32_test $tarball writeconf || rc=$?
done
t32_check
for tarball in $tarballs; do
+ banner "testing $tarball upgrade with ff convert"
ff_convert=yes t32_test $tarball || rc=$?
done
return $rc
run_test 32d "convert ff test"
test_32e() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.56) ]] ||
- { skip "Need MDS version at least 2.10.56"; return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.10.56) ]] ||
+ skip "Need MDS version at least 2.10.56"
local tarballs
local tarball
t32_check
for tarball in $tarballs; do
- echo $tarball | grep "2_9" || continue
+ [[ "$tarball" =~ "2_9" ]] || continue
#load_modules
+ banner "testing $tarball upgrade with DoM"
dom_upgrade=yes t32_test $tarball writeconf || let "rc += $?"
done
return $rc
local dev=${SINGLEMDS}_dev
local MDSDEV=${!dev}
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" &&
- return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
local fs2mdsvdev=$(mdsvdevname 1_2)
local fs2ostvdev=$(ostvdevname 1_2)
- if [ $(facet_fstype mds1) == ldiskfs ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
fi
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
- do_facet mgs "$LCTL conf_param $FSNAME2.sys.timeout=200" ||
- error "$LCTL conf_param $FSNAME2.sys.timeout=200 failed"
+
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ do_facet mgs "$PERM_CMD timeout=200" ||
+ error "$PERM_CMD timeout=200 failed"
+ else
+ do_facet mgs "$PERM_CMD $FSNAME2.sys.timeout=200" ||
+ error "$PERM_CMD $FSNAME2.sys.timeout=200 failed"
+ fi
mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
$MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
echo "ok."
cp /etc/hosts $MOUNT2/ || error "copy /etc/hosts $MOUNT2/ failed"
- $GETSTRIPE $MOUNT2/hosts || error "$GETSTRIPE $MOUNT2/hosts failed"
+ $LFS getstripe $MOUNT2/hosts ||
+ error "$LFS getstripe $MOUNT2/hosts failed"
umount $MOUNT2
stop fs2ost -f
FAKENID="127.0.0.2"
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param \
- ${device}.failover.node=$(h2nettype $FAKENID)" ||
- error "Setting ${device}.failover.node=\
- $(h2nettype $FAKENID) failed."
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ do_facet mgs "$PERM_CMD \
+ mdc.*${device}*.import=connection=$(h2nettype $FAKENID)" ||
+ error "Setting mdc.*${device}*.import=connection=\
+ $(h2nettype $FAKENID) failed."
+ else
+ do_facet mgs "$PERM_CMD \
+ ${device}.failover.node=$(h2nettype $FAKENID)" ||
+ error "Setting ${device}.failover.node=\
+ $(h2nettype $FAKENID) failed."
+ fi
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
run_test 35a "Reconnect to the last active server first"
test_35b() { # bug 18674
- remote_mds || { skip "local MDS" && return 0; }
+ remote_mds || skip "local MDS"
setup
debugsave
FAKENID="127.0.0.2"
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param \
- ${device}.failover.node=$(h2nettype $FAKENID)" ||
- error "Set ${device}.failover.node=\
- $(h2nettype $FAKENID) failed"
+
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ do_facet mgs "$PERM_CMD \
+ mdc.*${device}*.import=connection=$(h2nettype $FAKENID)" ||
+ error "Set mdc.*${device}*.import=connection=\
+ $(h2nettype $FAKENID) failed"
+ else
+ do_facet mgs "$PERM_CMD \
+ ${device}.failover.node=$(h2nettype $FAKENID)" ||
+ error "Set ${device}.failover.node=\
+ $(h2nettype $FAKENID) failed"
+ fi
local at_max_saved=0
# adaptive timeouts may prevent seeing the issue
run_test 35b "Continue reconnection retries, if the active server is busy"
test_36() { # 12743
- [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs" && return
+ [ $OSTCOUNT -lt 2 ] && skip_env "needs >= 2 OSTs"
[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] ||
- { skip "remote OST" && return 0; }
+ skip "remote OST"
local rc=0
local FSNAME2=test1234
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
is_blkdev $SINGLEMDS $MDSDEV &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
local fs2ostvdev=$(ostvdevname 1_2)
local fs3ostvdev=$(ostvdevname 2_2)
+ load_modules
add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
--reformat $fs2mdsdev $fs2mdsvdev || exit 10
# XXX after we support non 4K disk blocksize in ldiskfs, specify a
local opts=$MDS_MOUNT_OPTS
local rc=0
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
echo "MDS : $mdsdev"
if ! do_facet $SINGLEMDS test -b $mdsdev; then
opts=$(csa_add "$opts" -o loop)
fi
+
+ load_modules
mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
$mdsdev_sym $mntpt 2>&1)
rc=${PIPESTATUS[0]}
run_test 37 "verify set tunables works for symlink device"
test_38() { # bug 14222
- local fstype=$(facet_fstype $SINGLEMDS)
local mntpt=$(facet_mntpt $SINGLEMDS)
setup
run_test 40 "race during service thread startup"
test_41a() { #bug 14134
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
skip "Loop devices does not work with nosvc option"
- return
fi
- combined_mgs_mds ||
- { skip "needs combined MGT and MDT device" && return 0; }
+ combined_mgs_mds || skip "needs combined MGT and MDT device"
start_mdt 1 -o nosvc -n
if [ $MDSCOUNT -ge 2 ]; then
run_test 41a "mount mds with --nosvc and --nomgs"
test_41b() {
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
skip "Loop devices does not work with nosvc option"
- return
fi
- ! combined_mgs_mds && skip "needs combined mgs device" && return 0
+ ! combined_mgs_mds && skip "needs combined mgs device"
stopall
reformat
run_test 41b "mount mds with --nosvc and --nomgs on first mount"
test_41c() {
- local server_version=$(lustre_version_code $SINGLEMDS)
local oss_list=$(comma_list $(osts_nodes))
- [[ $server_version -ge $(version_code 2.6.52) ]] ||
- [[ $server_version -ge $(version_code 2.5.26) &&
- $server_version -lt $(version_code 2.5.50) ]] ||
- [[ $server_version -ge $(version_code 2.5.4) &&
- $server_version -lt $(version_code 2.5.11) ]] ||
- { skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.52) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.26) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.50) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.4) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.11) ]] ||
+ skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"
# ensure mds1 ost1 have been created even if running sub-test standalone
cleanup
local mds1dev=$(mdsdevname 1)
local mds1mnt=$(facet_mntpt mds1)
- local mds1fstype=$(facet_fstype mds1)
local mds1opts=$MDS_MOUNT_OPTS
- if [ $mds1fstype == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet mds1 test -b $mds1dev; then
mds1opts=$(csa_add "$mds1opts" -o loop)
fi
- if [[ $mds1fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
import_zpool mds1 || return ${PIPESTATUS[0]}
fi
local ost1dev=$(ostdevname 1)
local ost1mnt=$(facet_mntpt ost1)
- local ost1fstype=$(facet_fstype ost1)
local ost1opts=$OST_MOUNT_OPTS
- if [ $ost1fstype == ldiskfs ] &&
+ if [ "$ost1_FSTYPE" == ldiskfs ] &&
! do_facet ost1 test -b $ost1dev; then
ost1opts=$(csa_add "$ost1opts" -o loop)
fi
- if [[ $ost1fstype == zfs ]]; then
+ if [[ "$ost1_FSTYPE" == zfs ]]; then
import_zpool ost1 || return ${PIPESTATUS[0]}
fi
run_test 41c "concurrent mounts of MDT/OST should all fail but one"
test_42() { #bug 14693
+ local PARAM
+
setup
check_mount || error "client was not mounted"
- do_facet mgs $LCTL conf_param $FSNAME.llite.some_wrong_param=10
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ PARAM="llite.$FSNAME-*.some_wrong_param"
+ else
+ PARAM="$FSNAME.llite.some_wrong_param"
+ fi
+
+ do_facet mgs $PERM_CMD $PARAM=10
umount_client $MOUNT ||
error "unmounting client failed with invalid llite param"
mount_client $MOUNT ||
error "mounting client failed with invalid llite param"
- do_facet mgs $LCTL conf_param $FSNAME.sys.some_wrong_param=20
+ do_facet mgs $PERM_CMD $PARAM=20
cleanup || error "stopping $FSNAME failed with invalid sys param"
setup
check_mount || error "client was not mounted with invalid sys param"
run_test 42 "allow client/server mount/unmount with invalid config param"
test_43a() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.5.58) ]] ||
- { skip "Need MDS version at least 2.5.58" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.5.58) ]] ||
+ skip "Need MDS version at least 2.5.58"
[ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
ID1=${ID1:-501}
USER1=$(getent passwd | grep :$ID1:$ID1: | cut -d: -f1)
- [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1" &&
- return
+ [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1"
setup
chmod ugo+x $DIR || error "chmod 0 failed"
- set_conf_param_and_check mds1 \
- "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ set_persistent_param_and_check mds1 \
+ "mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"0:0"
wait_update $HOSTNAME \
"$LCTL get_param -n llite.${FSNAME}*.root_squash" \
"0:0" ||
error "check llite root_squash failed!"
- set_conf_param_and_check mds1 \
- "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ set_persistent_param_and_check mds1 \
+ "mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME.mdt.nosquash_nids" \
"NONE"
wait_update $HOSTNAME \
"NONE" ||
error "check llite nosquash_nids failed!"
- #
- # create set of test files
- #
- echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
- chmod go-rw $DIR/$tfile-userfile || error "chmod 1 failed"
- chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
+ #
+ # create set of test files
+ #
+ echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
+ chmod go-rw $DIR/$tfile-userfile || error "chmod 1 failed"
+ chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
- echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
- chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
+ echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
+ chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
mkdir $DIR/$tdir-rootdir || error "mkdir failed"
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
# set root squash UID:GID to RUNAS_ID
# root should be able to access only files owned by RUNAS_ID
#
- set_conf_param_and_check mds1 \
- "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ set_persistent_param_and_check mds1 \
+ "mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"$RUNAS_ID:$RUNAS_ID"
wait_update $HOSTNAME \
local NIDLIST=$($LCTL list_nids all | tr '\n' ' ')
NIDLIST="2@gni $NIDLIST 192.168.0.[2,10]@tcp"
NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
- set_conf_param_and_check mds1 \
- "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ set_persistent_param_and_check mds1 \
+ "mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME-MDTall.mdt.nosquash_nids" \
"$NIDLIST"
wait_update $HOSTNAME \
run_test 43a "check root_squash and nosquash_nids"
test_43b() { # LU-5690
- [[ $(lustre_version_code mgs) -ge $(version_code 2.7.62) ]] ||
- { skip "Need MGS version 2.7.62+"; return; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.7.62) ]] ||
+ skip "Need MGS version 2.7.62+"
if [[ -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
#second client see all ost's
mount_client $MOUNT2 || error "mount_client failed"
- $SETSTRIPE -c -1 $MOUNT2 || error "$SETSTRIPE -c -1 $MOUNT2 failed"
- $GETSTRIPE $MOUNT2 || error "$GETSTRIPE $MOUNT2 failed"
+ $LFS setstripe -c -1 $MOUNT2 ||
+ error "$LFS setstripe -c -1 $MOUNT2 failed"
+ $LFS getstripe $MOUNT2 || error "$LFS getstripe $MOUNT2 failed"
echo "ok" > $MOUNT2/widestripe
- $GETSTRIPE $MOUNT2/widestripe ||
- error "$GETSTRIPE $MOUNT2/widestripe failed"
+ $LFS getstripe $MOUNT2/widestripe ||
+ error "$LFS getstripe $MOUNT2/widestripe failed"
# fill acl buffer for avoid expand lsm to them
awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd |
while read acl; do
setup_noconfig
check_mount || error "check_mount failed"
- $SETSTRIPE -c -1 $MOUNT || error "$SETSTRIPE -c -1 $MOUNT failed"
- $GETSTRIPE $MOUNT || error "$GETSTRIPE $MOUNT failed"
+ $LFS setstripe -c -1 $MOUNT ||
+ error "$LFS setstripe -c -1 $MOUNT failed"
+ $LFS getstripe $MOUNT || error "$LFS getstripe $MOUNT failed"
echo "ok" > $MOUNT/widestripe
- $GETSTRIPE $MOUNT/widestripe ||
- error "$GETSTRIPE $MOUNT/widestripe failed"
+ $LFS getstripe $MOUNT/widestripe ||
+ error "$LFS getstripe $MOUNT/widestripe failed"
# In the future, we may introduce more EAs, such as selinux, enlarged
# LOV EA, and so on. These EA will use some EA space that is shared by
# ACL entries. So here we only check some reasonable ACL entries count,
# instead of the max number that is calculated from the max_ea_size.
- if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.8.57) ];
- then
+ if [ "$MDS1_VERSION" -lt $(version_code 2.8.57) ]; then
count=28 # hard coded of RPC protocol
- elif [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
- count=4000 # max_num 4091 max_ea_size = 32768
- elif ! large_xattr_enabled; then
- count=450 # max_num 497 max_ea_size = 4012
+ elif large_xattr_enabled; then
+ count=4500 # max_num 8187 max_ea_size = 65452
+ # not create too many (4500) to save test time
else
- count=4500 # max_num 8187 max_ea_size = 1048492
- # not create too much (>5000) to save test time
+ count=450 # max_num 497 max_ea_size = 4012
fi
echo "It is expected to hold at least $count ACL entries"
run_test 49b "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
lazystatfs() {
+ # wait long enough to exceed OBD_STATFS_CACHE_SECONDS = 1
+ sleep 2
# Test both statfs and lfs df and fail if either one fails
multiop_bg_pause $1 f_
- RC1=$?
+ RC=$?
PID=$!
killall -USR1 multiop
- [ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
- wait $PID || { RC1=$?; log "multiop return error "; }
+ [ $RC -ne 0 ] && log "lazystatfs multiop failed"
+ wait $PID || { RC=$?; log "multiop return error "; }
+ # wait long enough to exceed OBD_STATFS_CACHE_SECONDS = 1
+ sleep 2
$LFS df -l &
PID=$!
sleep 5
- kill -s 0 $PID
- RC2=$?
- if [ $RC2 -eq 0 ]; then
- kill -s 9 $PID
- log "lazystatfs df failed"
+ if kill -s 0 $PID; then
+ RC=1
+ kill -s 9 $PID
+ log "lazystatfs lfs df failed to complete in 5s"
fi
- RC=0
- [[ $RC1 -ne 0 || $RC2 -eq 0 ]] && RC=1
return $RC
}
# Wait for client to detect down OST
stop_ost || error "Unable to stop OST1"
- wait_osc_import_state mds ost DISCONN
+ wait_osc_import_state client ost DISCONN
+ $LCTL dl
+ log "OSCs should all be DISCONN"
lazystatfs $MOUNT || error "lazystatfs should not return EIO"
run_test 50f "normal statfs one server in down"
test_50g() {
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs"
setup
start_ost2 || error "Unable to start OST2"
- wait_osc_import_state mds ost2 FULL
+ wait_osc_import_state mds ost2 FULL
wait_osc_import_ready client ost2
- local PARAM="${FSNAME}-OST0001.osc.active"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ local PARAM="osc.${FSNAME}-OST0001*.active"
+ else
+ local PARAM="${FSNAME}-OST0001.osc.active"
+ fi
- $SETSTRIPE -c -1 $DIR/$tfile || error "$SETSTRIPE failed"
- do_facet mgs $LCTL conf_param $PARAM=0 ||
- error "Unable to deactivate OST"
+ $LFS setstripe -c -1 $DIR/$tfile || error "$LFS setstripe failed"
+ do_facet mgs $PERM_CMD $PARAM=0 || error "Unable to deactivate OST"
umount_client $MOUNT || error "Unable to unmount client"
mount_client $MOUNT || error "Unable to mount client"
# This df should not cause a panic
df -k $MOUNT
- do_facet mgs $LCTL conf_param $PARAM=1 || error "Unable to activate OST"
+ do_facet mgs $PERM_CMD $PARAM=1 || error "Unable to activate OST"
rm -f $DIR/$tfile || error "unable to remove file $DIR/$tfile"
umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
# LU-642
test_50h() {
# prepare MDT/OST, make OSC inactive for OST1
- [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "needs >=2 OSTs"
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --param osc.active=0 `ostdevname 1`" ||
error "tunefs OST1 failed"
start_mds || error "Unable to start MDT"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# activatate OSC for OST1
- local TEST="$LCTL get_param -n osc.${FSNAME}-OST0000-osc-[!M]*.active"
- set_conf_param_and_check client \
- "$TEST" "${FSNAME}-OST0000.osc.active" 1 ||
- error "Unable to activate OST1"
+ set_persistent_param_and_check client \
+ "osc.${FSNAME}-OST0000-osc-[!M]*.active" \
+ "${FSNAME}-OST0000.osc.active" 1
mkdir $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
- $SETSTRIPE -c -1 -i 0 $DIR/$tdir/2 ||
- error "$SETSTRIPE $DIR/$tdir/2 failed"
+ $LFS setstripe -c -1 -i 0 $DIR/$tdir/2 ||
+ error "$LFS setstripe $DIR/$tdir/2 failed"
sleep 1 && echo "create a file after OST1 is activated"
- # create some file
- createmany -o $DIR/$tdir/2/$tfile-%d 1
+ # doing some io, shouldn't crash
+ dd if=/dev/zero of=$DIR/$tdir/2/$tfile-io bs=1M count=10
# check OSC import is working
stat $DIR/$tdir/2/* >/dev/null 2>&1 ||
error "some OSC imports are still not connected"
# cleanup
+ rm -rf $DIR/$tdir
umount_client $MOUNT || error "Unable to umount client"
stop_ost2 || error "Unable to stop OST2"
cleanup_nocli || error "cleanup_nocli failed with $?"
test_50i() {
# prepare MDT/OST, make OSC inactive for OST1
- [ "$MDSCOUNT" -lt "2" ] && skip_env "needs >= 2 MDTs" && return
+ [ "$MDSCOUNT" -lt "2" ] && skip "needs >= 2 MDTs"
load_modules
[ $(facet_fstype mds2) == zfs ] && import_zpool mds2
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
- $LCTL conf_param ${FSNAME}-MDT0000.mdc.active=0 &&
- error "deactive MDC0 succeeds"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ $PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&
+ error "deactive MDC0 succeeds"
+ else
+ $PERM_CMD ${FSNAME}-MDT0000.mdc.active=0 &&
+ error "deactive MDC0 succeeds"
+ fi
+
# activate MDC for MDT2
- local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
- set_conf_param_and_check client \
- "$TEST" "${FSNAME}-MDT0001.mdc.active" 1 ||
- error "Unable to activate MDT2"
+ set_persistent_param_and_check client \
+ "mdc.${FSNAME}-MDT0001-mdc-*.active" \
+ "${FSNAME}-MDT0001.mdc.active" 1
wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds2 FULL
- if [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.60) ]
+ if [ "$MDS1_VERSION" -ge $(version_code 2.7.60) ]
then
wait_dne_interconnect
fi
rm -rf $DIR/$tdir/2 || error "unlink dir failed"
# deactivate MDC for MDT2
- local TEST="$LCTL get_param -n mdc.${FSNAME}-MDT0001-mdc-[!M]*.active"
- set_conf_param_and_check client \
- "$TEST" "${FSNAME}-MDT0001.mdc.active" 0 ||
- error "Unable to deactivate MDT2"
+ set_persistent_param_and_check client \
+ "mdc.${FSNAME}-MDT0001-mdc-*.active" \
+ "${FSNAME}-MDT0001.mdc.active" 0
wait_osp_active mds ${FSNAME}-MDT0001 1 0
check_mount || error "check_mount failed"
mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
- $SETSTRIPE -c -1 $MOUNT/$tdir ||
- error "$SETSTRIPE -c -1 $MOUNT/$tdir failed"
+ $LFS setstripe -c -1 $MOUNT/$tdir ||
+ error "$LFS setstripe -c -1 $MOUNT/$tdir failed"
#define OBD_FAIL_MDS_REINT_DELAY 0x142
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x142"
touch $MOUNT/$tdir/$tfile &
}
test_52() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
start_mds || error "Unable to start MDS"
error "Unable to create temporary file"
sleep 1
- $SETSTRIPE -c -1 -S 1M $DIR/$tdir || error "$SETSTRIPE failed"
+ $LFS setstripe -c -1 -S 1M $DIR/$tdir || error "$LFS setstripe failed"
for (( i=0; i < nrfiles; i++ )); do
multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c ||
if ! do_node $ost1node test -b $ost1_dev; then
loop="-o loop"
fi
- do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
+ do_node $ost1node mount -t "$ost1_FSTYPE" $loop $ost1_dev \
$ost1mnt ||
error "Unable to mount ost1 as ldiskfs"
fi
[ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
- skip_env "module parameter forced $facet thread count" &&
- tmin=3 && tmax=$((3 * tmax))
+ skip_env "module parameter forced $facet thread count"
# Check that we can change min/max
do_facet $facet "$LCTL set_param \
setmodopts $modname "$oldvalue"
# Check that $opts took
- tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min")
- tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max")
+ tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
+ echo 0)
+ tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
+ echo 0)
tstarted=$(do_facet $facet \
- "$LCTL get_param -n ${paramp}.threads_started")
+ "$LCTL get_param -n ${paramp}.threads_started" || echo 0)
lassert 28 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' ||
return $?
cleanup
run_test 53b "check MDS thread count params"
test_54a() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p ||
run_test 54a "test llverdev and partial verify of device"
test_54b() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
setup
}
test_55() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local mdsdev=$(mdsdevname 1)
stopall
done
- reformat
+ reformat_and_config
}
run_test 55 "check lov_objid size"
test_56a() {
- local server_version=$(lustre_version_code $SINGLEMDS)
local mds_journal_size_orig=$MDSJOURNALSIZE
local n
echo ok
$LFS osts
- if [[ $server_version -ge $(version_code 2.6.54) ]] ||
- [[ $server_version -ge $(version_code 2.5.4) &&
- $server_version -lt $(version_code 2.5.11) ]]; then
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.4) &&
+ "$MDS1_VERSION" -lt $(version_code 2.5.11) ]]; then
wait_osc_import_state mds ost1 FULL
wait_osc_import_state mds ost2 FULL
- $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
+ $LFS setstripe --stripe-count=-1 $DIR/$tfile ||
error "Unable to setstripe $DIR/$tfile"
n=$($LFS getstripe --stripe-count $DIR/$tfile)
[ "$n" -eq 2 ] || error "Stripe count not two: $n"
stopall
MDSJOURNALSIZE=$mds_journal_size_orig
- reformat
+ reformat_and_config
}
run_test 56a "check big OST indexes and out-of-index-order start"
stop mds2
stop mds3
stopall
- reformat
+ reformat_and_config
}
test_56b() {
- [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
trap cleanup_56b EXIT RETURN ERR
stopall
local NID=$(do_facet ost1 "$LCTL get_param nis" |
tail -1 | awk '{print $1}')
writeconf_or_reformat
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" ||
error "tunefs failed"
start_mgsmds
start_ost && error "OST registration from failnode should fail"
- reformat
+ cleanup
}
run_test 57a "initial registration from failnode should fail (should return errs)"
local NID=$(do_facet ost1 "$LCTL get_param nis" |
tail -1 | awk '{print $1}')
writeconf_or_reformat
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" ||
error "tunefs failed"
start_mgsmds
start_ost || error "OST registration from servicenode should not fail"
- reformat
+ cleanup
}
run_test 57b "initial registration from servicenode should not fail"
# restart MDS with missing llog files
start_mds || error "unable to start MDS"
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0"
- reformat
+ cleanup
}
run_test 58 "missing llog files must not prevent MDT from mounting"
run_test 59 "writeconf mount option"
test_60() { # LU-471
- local num
-
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
+ local num
+
for num in $(seq $MDSCOUNT); do
add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
--mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' \
echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
# we set stride extended options
echo $dump | grep stride > /dev/null || error "stride is not set"
- reformat
+ stop_mds
+ reformat_and_config
}
run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
test_61() { # LU-80
- local lxattr=false
+ local lxattr=$(large_xattr_enabled)
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
- { skip "Need MDS version at least 2.1.53"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.1.53) ] ||
+ skip "Need MDS version at least 2.1.53"
- if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! large_xattr_enabled; then
lxattr=true
for num in $(seq $MDSCOUNT); do
- do_facet mds${num} $TUNE2FS -O large_xattr \
+ do_facet mds${num} $TUNE2FS -O ea_inode \
$(mdsdevname $num) ||
error "tune2fs on mds $num failed"
done
fi
- combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
- setup_noconfig || error "setting up the filesystem failed"
+ setup || error "setting up the filesystem failed"
client_up || error "starting client failed"
local file=$DIR/$tfile
local small_value="bar"
local name="trusted.big"
- log "save large xattr $name on $file"
+ log "save large xattr of $(max_xattr_size) bytes on $name on $file"
setfattr -n $name -v $large_value $file ||
error "saving $name on $file failed"
log "remove large xattr $name from $file"
setfattr -x $name $file || error "removing $name from $file failed"
- if $lxattr; then
+ if $lxattr && [ "$mds1_FSTYPE" == ldiskfs ]; then
stopall || error "stopping for e2fsck run"
for num in $(seq $MDSCOUNT); do
run_e2fsck $(facet_active_host mds$num) \
# need to delete this file to avoid problems in other tests
rm -f $file
- stopall || error "stopping systems to turn off large_xattr"
- if $lxattr; then
- for num in $(seq $MDSCOUNT); do
- do_facet mds${num} $TUNE2FS -O ^large_xattr \
- $(mdsdevname $num) ||
- error "tune2fs on mds $num failed"
- done
- fi
+ cleanup || error "stopping systems failed"
}
run_test 61 "large xattr"
test_62() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
+ [[ "$MDS1_VERSION" -ge $(version_code 2.2.51) ]] ||
+ skip "Need MDS version at least 2.2.51"
# MRP-118
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
- { skip "Need MDS version at least 2.2.51"; return 0; }
-
echo "disable journal for mds"
do_facet mds1 $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
start_mds && error "MDT start should fail"
run_test 62 "start with disabled journal"
test_63() {
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ldiskfs
awk '/ldiskfs_inode_cache/ { print $5 / $6 }')
if [ -z "$inode_slab" ]; then
skip "ldiskfs module has not been loaded"
- return
fi
echo "$inode_slab ldiskfs inodes per page"
# If kmalloc-128 is also 1 per page - this is a debug kernel
# and so this is not an error.
local kmalloc128=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
- awk '/^(kmalloc|size)-128 / { print $5 / $6 }')
+ awk '/^(dma-kmalloc|size)-128 / { print $5 / $6 }')
# 32 128-byte chunks in 4k
[ "${kmalloc128%.*}" -lt "32" ] ||
error "ldiskfs inode too big, only $inode_slab objs/page, " \
test_65() { # LU-2237
# Currently, the test is only valid for ldiskfs backend
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
+ skip "ldiskfs only test"
local devname=$(mdsdevname ${SINGLEMDS//mds/})
local brpt=$(facet_mntpt brpt)
# remove the "last_rcvd" file
do_facet $SINGLEMDS "mkdir -p $brpt"
do_facet $SINGLEMDS \
- "mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
+ "mount -t $mds1_FSTYPE $opts $devname $brpt"
do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
do_facet $SINGLEMDS "$UMOUNT $brpt"
run_test 65 "re-create the lost last_rcvd file when server mount"
test_66() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
- { skip "Need MGS version at least 2.3.59"; return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.3.59) ]] ||
+ skip "Need MGS version at least 2.3.59"
setup
local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
echo "wrong nids list should not destroy the system"
do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "wrong nids list" &&
error "wrong parse"
+ do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "asdfasdf, asdfadf" &&
+ error "wrong parse"
echo "replace OST nid"
do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID ||
do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 "wrong nids list" &&
error "wrong parse"
+ local FAKE_NIDS="192.168.0.112@tcp1,192.168.0.112@tcp2"
+ local FAKE_FAILOVER="192.168.0.113@tcp1,192.168.0.113@tcp2"
+ local NIDS_AND_FAILOVER="$MDS_NID,$FAKE_NIDS:$FAKE_FAILOVER"
+ echo "set NIDs with failover"
+ do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $NIDS_AND_FAILOVER ||
+ error "replace nids failed"
+
+
echo "replace MDS nid"
do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $MDS_NID ||
error "replace nids failed"
check_mount || error "error after nid replace"
cleanup || error "cleanup failed"
- reformat
+ reformat_and_config
}
run_test 66 "replace nids"
local START
local END
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
- { skip "Need MDS version at least 2.4.53"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.4.53) ] ||
+ skip "Need MDS version at least 2.4.53"
umount_client $MOUNT || error "umount client failed"
- if ! combined_mgs_mds; then
- start_mgs || error "start mgs failed"
- fi
-
- start_mdt 1 || error "MDT start failed"
- start_ost || error "Unable to start OST1"
+ start_mgsmds
+ start_ost
# START-END - the sequences we'll be reserving
START=$(do_facet $SINGLEMDS \
# just "precreate" the missing objects. In the past it might try to recreate
# millions of objects after an OST was reformatted
test_69() {
- local server_version=$(lustre_version_code $SINGLEMDS)
-
- [[ $server_version -lt $(version_code 2.4.2) ]] &&
- skip "Need MDS version at least 2.4.2" && return
+ [[ "$MDS1_VERSION" -lt $(version_code 2.4.2) ]] &&
+ skip "Need MDS version at least 2.4.2"
- [[ $server_version -ge $(version_code 2.4.50) ]] &&
- [[ $server_version -lt $(version_code 2.5.0) ]] &&
- skip "Need MDS version at least 2.5.0" && return
+ [[ "$MDS1_VERSION" -ge $(version_code 2.4.50) ]] &&
+ [[ "$MDS1_VERSION" -lt $(version_code 2.5.0) ]] &&
+ skip "Need MDS version at least 2.5.0"
setup
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
local OSTNAME=$(ostname_from_index 0)
local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
local last_id=$(do_facet mds1 $LCTL get_param -n \
- osc.$mdtosc_proc1.prealloc_last_id)
+ osp.$mdtosc_proc1.prealloc_last_id)
# Want to have OST LAST_ID over 5 * OST_MAX_PRECREATE to
# verify that the LAST_ID recovery is working properly. If
local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
log "On OST0, $ifree inodes available. Want $num_create."
- $SETSTRIPE -i 0 $DIR/$tdir ||
- error "$SETSTRIPE -i 0 $DIR/$tdir failed"
+ $LFS setstripe -i 0 $DIR/$tdir ||
+ error "$LFS setstripe -i 0 $DIR/$tdir failed"
if [ $ifree -lt 10000 ]; then
files=$(( ifree - 50 ))
else
mount_client $MOUNT || error "mount client failed"
touch $DIR/$tdir/$tfile-last || error "create file after reformat"
- local idx=$($GETSTRIPE -i $DIR/$tdir/$tfile-last)
+ local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
run_test 69 "replace an OST with the same index"
test_70a() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
cleanup || error "cleanup failed with $?"
run_test 70a "start MDT0, then OST, then MDT1"
test_70b() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 70b "start OST, MDT1, MDT0"
test_70c() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_mds || error "MDS start fail"
run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
test_70d() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
local MDTIDX=1
start_mds || error "MDS start fail"
run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
test_70e() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
- [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.62) ] ||
- { skip "Need MDS version at least 2.7.62"; return 0; }
+ [ "$MDS1_VERSION" -ge $(version_code 2.7.62) ] ||
+ skip "Need MDS version at least 2.7.62"
- cleanup || error "cleanup failed with $?"
+ reformat || error "reformat failed with $?"
+
+ load_modules
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
local opts_mds="$(mkfs_opts mds1 $mdsdev) --reformat $mdsdev $mdsvdev"
local opts_ost="$(mkfs_opts ost1 $ostdev) --reformat $ostdev $ostvdev"
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
add mds1 $opts_mds || error "add mds1 failed"
start_mdt 1 || error "start mdt1 failed"
add ost1 $opts_ost || error "add ost1 failed"
run_test 70e "Sync-on-Cancel will be enabled by default on DNE"
test_71a() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
+ skip "needs separate MGS/MDT"
fi
local MDTIDX=1
run_test 71a "start MDT0 OST0, MDT1, OST1"
test_71b() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
+ skip "needs separate MGS/MDT"
fi
local MDTIDX=1
run_test 71b "start MDT1, OST0, MDT0, OST1"
test_71c() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71c "start OST0, OST1, MDT1, MDT0"
test_71d() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71d "start OST0, MDT1, MDT0, OST1"
test_71e() {
- [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
- if combined_mgs_mds; then
- skip "needs separate MGS/MDT" && return
- fi
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ combined_mgs_mds && skip "needs separate MGS/MDT"
+
local MDTIDX=1
start_ost || error "OST0 start fail"
run_test 71e "start OST0, MDT1, OST1, MDT0"
test_72() { #LU-2634
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
+ skip "ldiskfs only test"
+
local mdsdev=$(mdsdevname 1)
local ostdev=$(ostdevname 1)
local cmd="$E2FSCK -fnvd $mdsdev"
local fn=3
local add_options
- [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
+ cleanup
+ load_modules
if combined_mgs_mds; then
add_options='--reformat'
run_test 72 "test fast symlink with extents flag enabled"
test_73() { #LU-3006
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
error "1st tunefs failed"
start_mgsmds || error "start mds failed"
$LCTL get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
umount_client $MOUNT || error "umount client failed"
- stopall
- reformat
+ stop_ost
+ stop_mds
}
run_test 73 "failnode to update from mountdata properly"
test_75() { # LU-2374
- [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
- skip "Need MDS version at least 2.4.1" && return
+ [[ "$MDS1_VERSION" -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1"
local index=0
local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
- --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ --replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
+ --replace --reformat $(ostdevname 1) $(ostvdevname 1)"
#check with default parameters
add mds1 $opts_mds || error "add mds1 failed for default params"
add mds1 $opts_mds || error "add mds1 failed for new params"
add ost1 $opts_ost || error "add ost1 failed for new params"
- if ! combined_mgs_mds; then
- stop_mgs || error "stop mgs failed"
- fi
- reformat
+
+ reformat_and_config
return 0
}
run_test 75 "The order of --index should be irrelevant"
test_76a() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
- { skip "Need MDS version at least 2.4.52" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.4.52) ]] ||
+ skip "Need MDS version at least 2.4.52"
- if ! combined_mgs_mds; then
- start_mgs || error "start mgs failed"
- fi
setup
local MDMB_PARAM="osc.*.max_dirty_mb"
echo "Change MGS params"
error "client_cache_count is not saved after remount"
stopall
}
-run_test 76a "set permanent params set_param -P"
+run_test 76a "set permanent params with lctl across mounts"
test_76b() { # LU-4783
- [[ $(lustre_version_code mgs) -ge $(version_code 2.5.57) ]] ||
- { skip "Need MGS version at least 2.5.57" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.5.57) ]] ||
+ skip "Need MGS version at least 2.5.57"
stopall
setupall
do_facet mgs $LCTL get_param mgs.MGS.live.params ||
run_test 76b "verify params log setup correctly"
test_76c() {
- [[ $(lustre_version_code mgs) -ge $(version_code 2.8.54) ]] ||
- { skip "Need MDS version at least 2.4.52" && return 0; }
+ [[ "$MGS_VERSION" -ge $(version_code 2.8.54) ]] ||
+ skip "Need MDS version at least 2.4.52"
setupall
local MASK_PARAM="mdd.*.changelog_mask"
echo "Change changelog_mask"
stopall
}
-run_test 76c "verify changelog_mask is applied with set_param -P"
+run_test 76c "verify changelog_mask is applied with lctl set_param -P"
test_76d() { #LU-9399
setupall
stopall
}
-run_test 76d "verify llite.*.xattr_cache can be set by 'set_param -P' correctly"
+run_test 76d "verify llite.*.xattr_cache can be set by 'lctl set_param -P' correctly"
test_77() { # LU-3445
- local server_version=$(lustre_version_code $SINGLEMDS)
- [[ $server_version -ge $(version_code 2.8.55) ]] ||
- { skip "Need MDS version 2.8.55+ "; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.8.55) ]] ||
+ skip "Need MDS version 2.8.55+ "
if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
- skip_env "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working"
fi
local fs2mdsdev=$(mdsdevname 1_2)
run_test 77 "comma-separated MGS NIDs and failover node NIDs"
test_78() {
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ||
- $(facet_fstype ost1) != ldiskfs ]] &&
- skip "ldiskfs only test" && return
+ [[ "$mds1_FSTYPE" != ldiskfs ||
+ "$ost1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
# reformat the Lustre filesystem with a smaller size
local saved_MDSCOUNT=$MDSCOUNT
# check whether the MDT or OST filesystem was shrunk or not
if ! $shrunk; then
combined_mgs_mds || stop_mgs || error "(9) stop mgs failed"
- reformat || error "(10) reformat Lustre filesystem failed"
+ reformat_and_config ||
+ error "(10) reformat Lustre filesystem failed"
return 0
fi
MDSCOUNT=$saved_MDSCOUNT
OSTCOUNT=$saved_OSTCOUNT
- reformat || error "(14) reformat Lustre filesystem failed"
+ reformat_and_config || error "(14) reformat Lustre filesystem failed"
}
run_test 78 "run resize2fs on MDT and OST filesystems"
test_79() { # LU-4227
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.59) ]] ||
- { skip "Need MDS version at least 2.5.59"; return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.5.59) ]] ||
+ skip "Need MDS version at least 2.5.59"
local mdsdev1=$(mdsdevname 1)
local mdsvdev1=$(mdsvdevname 1)
mgsnode_opt=$(echo $opts_mds2 |
awk '{ for ( i = 1; i < NF; i++ )
if ( $i ~ "--mgsnode" ) { print $i; break } }')
- [ -n $mgsnode_opt ] &&
+ [ -n "$mgsnode_opt" ] &&
opts_mds2=$(echo $opts_mds2 | sed -e "s/$mgsnode_opt//")
mgsnode_opt=$(echo $opts_ost1 |
awk '{ for ( i = 1; i < NF; i++ )
if ( $i ~ "--mgsnode" ) { print $i; break } }')
- [ -n $mgsnode_opt ] &&
+ [ -n "$mgsnode_opt" ] &&
opts_ost1=$(echo $opts_ost1 | sed -e "s/$mgsnode_opt//")
-
+ load_modules
# -MGS, format a mdt without --mgs option
add mds1 $opts_mds1 $mdsdev1 $mdsvdev1 &&
error "Must specify --mgs when formatting mdt combined with mgs"
add ost1 $opts_ost1 $ostdev1 $ostvdev2 &&
error "Must specify --mgsnode when formatting an ost"
- reformat
+ reformat_and_config
}
run_test 79 "format MDT/OST without mgs option (should return errors)"
start_ost2 || error "Failed to start OST2"
do_facet ost1 "$LCTL set_param fail_loc=0"
- stopall
+ stop_ost2
+ stop_ost
+ stop_mds
}
run_test 80 "mgc import reconnect race"
done
OSTCOUNT=$saved_ostcount
- formatall
+ reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
}
# The main purpose of this test is to ensure the OST_INDEX_LIST functions as
# expected. This test uses OST_INDEX_LIST to format OSTs with a randomly
# assigned index and ensures we can mount such a formatted file system
test_81() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 3 ]] || skip_env "needs >= 3 OSTs"
stopall
# Check max_easize.
local max_easize=$($LCTL get_param -n llite.*.max_easize)
- [[ $max_easize -eq 128 ]] ||
- error "max_easize is $max_easize, should be 128 bytes"
+ # 65452 is XATTR_SIZE_MAX less ldiskfs ea overhead
+ if large_xattr_enabled; then
+ [[ $max_easize -ge 65452 ]] ||
+ error "max_easize is $max_easize, should be at least 65452 bytes"
+ else
+ # LU-11868
+ # 4012 is 4096 less ldiskfs ea overhead
+ [[ $max_easize -ge 4012 ]] ||
+ error "max_easize is $max_easize, should be at least 4012 bytes"
+ fi
restore_ostindex
}
#
# 5. Lastly ensure this functionality fails with directories.
test_82a() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 3 ]] || { skip_env "needs >= 3 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 3 ]] || skip_env "needs >= 3 OSTs"
stopall
done
ost_indices=$(comma_list $ost_indices)
- trap "restore_ostindex" EXIT
+ stack_trap "restore_ostindex" EXIT
echo -e "\nFormat $OSTCOUNT OSTs with sparse indices $ost_indices"
OST_INDEX_LIST=[$ost_indices] formatall
error "start ost$i failed"
done
+ # Collect debug information - start of test
+ do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param osp.*.prealloc_*_id
+
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
$LFS df $MOUNT || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL get_param osp.*.prealloc_*_id" EXIT
+
# 1. If the file does not exist, new file will be created
# with specified OSTs.
local file=$DIR/$tdir/$tfile-1
- local cmd="$SETSTRIPE -o $ost_indices $file"
+ local cmd="$LFS setstripe -o $ost_indices $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file $OSTCOUNT
# will be attached with specified layout.
file=$DIR/$tdir/$tfile-2
mcreate $file || error "mcreate $file failed"
- cmd="$SETSTRIPE -o $ost_indices $file"
+ cmd="$LFS setstripe -o $ost_indices $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
# be in the OST indices list.
local start_ost_idx=${ost_indices##*,}
file=$DIR/$tdir/$tfile-3
- cmd="$SETSTRIPE -o $ost_indices -i $start_ost_idx $file"
+ cmd="$LFS setstripe -o $ost_indices -i $start_ost_idx $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file $OSTCOUNT
check_start_ost_idx $file $start_ost_idx
file=$DIR/$tdir/$tfile-4
- cmd="$SETSTRIPE"
+ cmd="$LFS setstripe"
cmd+=" -o $(exclude_items_from_list $ost_indices $start_ost_idx)"
cmd+=" -i $start_ost_idx $file"
echo -e "\n$cmd"
eval $cmd && error "index $start_ost_idx should be in $ost_indices"
- # 5. Specifying OST indices for directory should fail with ENOSUPP.
+ # 5. Specifying OST indices for directory should succeed.
local dir=$DIR/$tdir/$tdir
mkdir $dir || error "mkdir $dir failed"
- cmd="$SETSTRIPE -o $ost_indices $dir"
- echo -e "\n$cmd"
- eval $cmd && error "$cmd should fail, specifying OST indices" \
- "for directory is not supported"
+ cmd="$LFS setstripe -o $ost_indices $dir"
+ if [ "$MDS1_VERSION" -gt $(version_code 2.11.53) ] &&
+ [ "$CLIENT_VERSION" -gt $(version_code 2.11.53) ]; then
+ echo -e "\n$cmd"
+ eval $cmd || error "unable to specify OST indices on directory"
+ else
+ echo "need MDS+client version at least 2.11.53"
+ fi
restore_ostindex
}
-run_test 82a "specify OSTs for file (succeed) or directory (fail)"
+run_test 82a "specify OSTs for file (succeed) or directory (succeed)"
cleanup_82b() {
trap 0
# Remove OSTs from a pool and destroy the pool.
destroy_pool $ost_pool || true
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
restore_ostindex
}
# the supplied OST index list points to OSTs not contained in the user
# supplied pool.
test_82b() { # LU-4665
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
- { skip "Need MDS version at least 2.6.54" && return; }
- [[ $OSTCOUNT -ge 4 ]] || { skip_env "needs >= 4 OSTs" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.6.54) ]] ||
+ skip "Need MDS version at least 2.6.54"
+ [[ $OSTCOUNT -ge 4 ]] || skip_env "needs >= 4 OSTs"
stopall
done
mount_client $MOUNT || error "mount client $MOUNT failed"
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
wait_osts_up
$LFS df $MOUNT || error "$LFS df $MOUNT failed"
# If [--pool|-p <pool_name>] is set with [--ost-list|-o <ost_indices>],
# then the OSTs must be the members of the pool.
local file=$DIR/$tdir/$tfile
- cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
+ cmd="$LFS setstripe -p $ost_pool -o $ost_idx_in_list $file"
echo -e "\n$cmd"
eval $cmd && error "OST with index $ost_idx_in_list should be" \
"in OST pool $ost_pool"
# Only select OST $ost_idx_in_list from $ost_pool for file.
ost_idx_in_list=${ost_idx_in_pool#*,}
- cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
+ cmd="$LFS setstripe -p $ost_pool -o $ost_idx_in_list $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
- cmd="$GETSTRIPE $file"
+ cmd="$LFS getstripe $file"
echo -e "\n$cmd"
eval $cmd || error "$cmd failed"
check_stripe_count $file 2
run_test 82b "specify OSTs for file with --pool and --ost-list options"
test_83() {
- [[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
- { skip "Need OST version at least 2.6.91" && return 0; }
- if [ $(facet_fstype ost1) != ldiskfs ]; then
+ [[ "$OST1_VERSION" -ge $(version_code 2.6.91) ]] ||
+ skip "Need OST version at least 2.6.91"
+ if [ "$ost1_FSTYPE" != ldiskfs ]; then
skip "ldiskfs only test"
- return
fi
local dev
dev=$(ostdevname 1)
ostmnt=$(facet_mntpt ost1)
- fstype=$(facet_fstype ost1)
# Mount the OST as an ldiskfs filesystem.
- log "mount the OST $dev as a $fstype filesystem"
+ log "mount the OST $dev as a $ost1_FSTYPE filesystem"
add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
--reformat $dev > /dev/null ||
error "format ost1 error"
if ! test -b $dev; then
- mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
+ mnt_opts=$(csa_add "$OST_MOUNT_FS_OPTS" -o loop)
fi
echo "mnt_opts $mnt_opts"
- do_facet ost1 mount -t $fstype $dev \
+ do_facet ost1 mount -t "$ost1_FSTYPE" $dev \
$ostmnt $mnt_opts
# Run llverfs on the mounted ldiskfs filesystem.
# It is needed to get ENOSPACE.
- log "run llverfs in partial mode on the OST $fstype $ostmnt"
+ log "run llverfs in partial mode on the OST $ost1_FSTYPE $ostmnt"
do_rpc_nodes $(facet_host ost1) run_llverfs $ostmnt -vpl \
- "no" || error "run_llverfs error on $fstype"
+ "no" || error "run_llverfs error on $ost1_FSTYPE"
# Unmount the OST.
log "unmount the OST $dev"
err=$(do_facet ost1 dmesg | grep "VFS: Busy inodes after unmount of")
echo "string err $err"
[ -z "$err" ] || error $err
- reformat
+ reformat_and_config
}
run_test 83 "ENOSPACE on OST doesn't cause message VFS: \
Busy inodes after unmount ..."
run_test 84 "check recovery_hard_time"
test_85() {
- [[ $(lustre_version_code ost1) -ge $(version_code 2.7.55) ]] ||
- { skip "Need OST version at least 2.7.55" && return 0; }
+ [[ "$OST1_VERSION" -ge $(version_code 2.7.55) ]] ||
+ skip "Need OST version at least 2.7.55"
##define OBD_FAIL_OSD_OST_EA_FID_SET 0x197
do_facet ost1 "lctl set_param fail_loc=0x197"
start_ost
}
test_86() {
- local server_version=$(lustre_version_code $SINGLEMDS)
- [ "$(facet_fstype ost1)" = "zfs" ] &&
- skip "LU-6442: no such mkfs params for ZFS OSTs" && return
- [[ $server_version -ge $(version_code 2.7.56) ]] ||
- { skip "Need server version newer than 2.7.55"; return 0; }
+ [ "$ost1_FSTYPE" = zfs ] &&
+ skip "LU-6442: no such mkfs params for ZFS OSTs"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
+ skip "Need server version newer than 2.7.55"
local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
--reformat $(ostdevname 1) $(ostvdevname 1)"
run_test 86 "Replacing mkfs.lustre -G option"
test_87() { #LU-6544
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.9.51) ]] ||
- { skip "Need MDS version at least 2.9.51" && return; }
- [[ $(facet_fstype $SINGLEMDS) != ldiskfs ]] &&
- { skip "ldiskfs only test" && return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.9.51) ]] ||
+ skip "Need MDS version at least 2.9.51"
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
[[ $OSTCOUNT -gt 59 ]] &&
- { skip "Ignore wide striping situation" && return; }
+ skip "Ignore wide striping situation"
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
local mdsdev=$(mdsdevname 1)
local mdsvdev=$(mdsvdevname 1)
unload_modules
reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
add mds1 $(mkfs_opts mds1 ${mdsdev}) --stripe-count-hint=$stripe_cnt \
--reformat $mdsdev $mdsvdev || error "add mds1 failed"
start_mdt 1 > /dev/null || error "start mdt1 failed"
check_mount || error "check client $MOUNT failed"
#set xattr
- $SETSTRIPE -E 1M -S 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
+ $LFS setstripe -E 1M -S 1M -c 1 -E 64M -c 1 -E -1 -c -1 $file ||
error "Create file with 3 components failed"
$TRUNCATE $file $((1024*1024*64+1)) || error "truncate file failed"
- i=$($GETSTRIPE -I3 -c $file) || error "get 3rd stripe count failed"
+ i=$($LFS getstripe -I3 -c $file) || error "get 3rd stripe count failed"
if [ $i -ne $OSTCOUNT ]; then
left_size=$(expr $left_size + $(expr $OSTCOUNT - $i) \* 24)
echo -n "Since only $i out $OSTCOUNT OSTs are used, "
more than $left_size-byte space left in inode."
echo "Verified: at most $left_size-byte space left in inode."
- stopall
+ unmount_ldiskfs $SINGLEMDS
+
+ for i in $(seq $OSTCOUNT); do
+ stop ost$i -f || error "stop ost$i failed"
+ done
}
run_test 87 "check if MDT inode can hold EAs with N stripes properly"
test_88() {
- [ "$(facet_fstype mds1)" == "zfs" ] &&
- skip "LU-6662: no implementation for ZFS" && return
+ [ "$mds1_FSTYPE" == zfs ] &&
+ skip "LU-6662: no implementation for ZFS"
load_modules
run_test 88 "check the default mount options can be overridden"
test_89() { # LU-7131
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.9.54) ]] ||
- { skip "Need MDT version at least 2.9.54" && return 0; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.9.54) ]] ||
+ skip "Need MDT version at least 2.9.54"
local key=failover.node
local val1=192.0.2.254@tcp0 # Reserved IPs, see RFC 5735
stopall
- [ $(facet_fstype mds1) == zfs ] && import_zpool mds1
+ [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
# Check that parameters are added correctly
echo "tunefs --param $key=$val1"
do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
[ $(echo $params | tr ' ' '\n') == "$key=$val1" ] ||
error "on-disk param not added correctly with --erase-params"
- reformat
+ reformat_and_config
}
run_test 89 "check tunefs --param and --erase-param{s} options"
}
test_90a() {
- reformat
- if ! combined_mgs_mds ; then
- start_mgs
- fi
setup
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
# check default value
$LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
### test 1.
# update max_mod_rpcs_in_flight
tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
grep -c "multi_mod_rpcs")
if [ "$tmp" -ne $MDSCOUNT ]; then
- echo "Client not able to send multiple modify RPCs in parallel"
cleanup
- return
+ skip "Client not able to send multiple modify RPCs in parallel"
fi
# update max_mod_rpcs_in_flight
}
run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
+save_params_90c() {
+ # get max_rpcs_in_flight value
+ mrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ echo "max_rpcs_in_flight is $mrif_90c"
+
+ # get max_mod_rpcs_in_flight value
+ mmrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight)
+ echo "max_mod_rpcs_in_flight is $mmrif_90c"
+
+ # get MDT max_mod_rpcs_per_client value
+ mmrpc_90c=$(do_facet mds1 \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+ echo "max_mod_rpcs_per_client is $mmrpc_90c"
+}
+
+restore_params_90c() {
+ trap 0
+
+ # restore max_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ # restore max_mod_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mmrif_90c
+
+ # restore MDT max_mod_rpcs_per_client value
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+}
+
test_90c() {
local tmp
- local mrif
- local mmrpc
setup
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
# check client is able to send multiple modify RPCs in paralell
tmp=$($LCTL get_param -n mdc.$FSNAME-MDT*-mdc-*.import |
grep -c "multi_mod_rpcs")
if [ "$tmp" -ne $MDSCOUNT ]; then
- skip "Client not able to send multiple modify RPCs in parallel"
cleanup
- return
+ skip "Client not able to send multiple modify RPCs in parallel"
fi
- # get max_rpcs_in_flight value
- mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
- echo "max_rpcs_in_flight is $mrif"
-
- # get MDT max_mod_rpcs_per_client
- mmrpc=$(do_facet mds1 \
- cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
- echo "max_mod_rpcs_per_client is $mmrpc"
+ save_params_90c
+ stack_trap restore_params_90c
# testcase 1
# attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
# prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
- umount_client $MOUNT
- do_facet mds1 \
- "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- mount_client $MOUNT
+ do_facet mds1 "echo $mrif_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- $LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
- error "set max_mod_rpcs_in_flight to $mrif should fail"
+ # if max_mod_rpcs_in_flight is set to be equal to or larger than
+ # max_rpcs_in_flight, then max_rpcs_in_flight will be increased
+ if [[ "$CLIENT_VERSION" -ge $(version_code 2.13.53) ]]; then
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c ||
+ error "set max_mod_rpcs_in_flight to $mrif_90c failed"
+
+ local new_mrif=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ ((new_mrif == mrif_90c + 1)) ||
+ error "max_rpcs_in_flight was not increased"
+ fi
umount_client $MOUNT
- do_facet mds1 \
- "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
mount_client $MOUNT
# testcase 2
# attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
# prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc_90c + 2))
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
- error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc_90c + 1)) &&
+ error "set max_mod_rpcs_in_flight to $((mmrpc_90c + 1)) should fail"
+ # testcase 3
+ # attempt to set max_mod_rpcs_in_flight permanently
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c
+
+ remount_client $MOUNT
+
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" \
+ "$((mrif_90c + 1))" ||
+ error "expected '$((mrif_90c + 1))' for max_rpcs_in_flight"
+
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight" \
+ "$mrif_90c" ||
+ error "expected '$mrif_90c' for max_mod_rpcs_in_flight"
+
+ restore_params_90c
cleanup
}
run_test 90c "check max_mod_rpcs_in_flight update limits"
[[ $($LCTL get_param mdc.*.import |
grep "connect_flags:.*multi_mod_rpc") ]] ||
- { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
+ skip "Need MDC with 'multi_mod_rpcs' feature"
$LFS mkdir -c1 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
idx=$(printf "%04x" $($LFS getdirstripe -i $DIR/$tdir))
tmp=$($LCTL get_param -N \
mdc.$FSNAME-MDT$idx-mdc-*.max_mod_rpcs_in_flight)
if [ -z "$tmp" ]; then
- skip "Client does not support multiple modify RPCs in flight"
cleanup
- return
+ skip "Client does not support multiple modify RPCs in flight"
fi
# get current value of max_mod_rcps_in_flight
local nid
local found
- [[ $(lustre_version_code ost1) -ge $(version_code 2.7.63) ]] ||
- { skip "Need OST version at least 2.7.63" && return 0; }
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.7.63) ]] ||
- { skip "Need MDT version at least 2.7.63" && return 0; }
+ [[ "$OST1_VERSION" -ge $(version_code 2.7.63) ]] ||
+ skip "Need OST version at least 2.7.63"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.7.63) ]] ||
+ skip "Need MDT version at least 2.7.63"
start_mds || error "MDS start failed"
start_ost || error "unable to start OST"
touch $ldevconfpath
fstype=$(facet_fstype mgs)
- if [ "$fstype" == "zfs" ]; then
+ if [ "$fstype" == zfs ]; then
fsldevformat="$fstype:"
else
fsldevformat=""
for num in $(seq $MDSCOUNT); do
fstype=$(facet_fstype mds$num)
- if [ "$fstype" == "zfs" ]; then
+ if [ "$fstype" == zfs ]; then
fsldevformat="$fstype:"
else
fsldevformat=""
for num in $(seq $OSTCOUNT); do
fstype=$(facet_fstype ost$num)
- if [ "$fstype" == "zfs" ]; then
+ if [ "$fstype" == zfs ]; then
fsldevformat="$fstype:"
else
fsldevformat=""
run_test 92 "ldev returns MGS NID correctly in command substitution"
test_93() {
- [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs"
reformat
#start mgs or mgs/mdt0
start_ost || error "OST0 start fail"
#define OBD_FAIL_MGS_WRITE_TARGET_DELAY 0x90e
- do_facet mgs "$LCTL set_param fail_val = 10 fail_loc=0x8000090e"
+ do_facet mgs "$LCTL set_param fail_val=10 fail_loc=0x8000090e"
for num in $(seq 2 $MDSCOUNT); do
start_mdt $num &
done
mount_client $MOUNT || error "mount client fails"
wait_osc_import_state mds ost FULL
- wait_osc_import_state client ost FULL
+ wait_osc_import_ready client ost
check_mount || error "check_mount failed"
cleanup || error "cleanup failed with $?"
for ((x = 1; x <= 400; x++)); do
mountopt="$mountopt,user_xattr"
done
- remount_client $mountopt $MOUNT 2>&1 | grep "too long" ||
+ mount_client $MOUNT remount,$mountopt 2>&1 | grep "too long" ||
error "Buffer overflow check failed"
cleanup || error "cleanup failed"
}
test_99()
{
- [[ $(facet_fstype ost1) != ldiskfs ]] &&
- { skip "ldiskfs only test" && return; }
- [[ $(lustre_version_code ost1) -ge $(version_code 2.8.57) ]] ||
- { skip "Need OST version at least 2.8.57" && return 0; }
+ [[ "$ost1_FSTYPE" != ldiskfs ]] &&
+ skip "ldiskfs only test"
+ [[ "$OST1_VERSION" -ge $(version_code 2.8.57) ]] ||
+ skip "Need OST version at least 2.8.57"
local ost_opts="$(mkfs_opts ost1 $(ostdevname 1)) \
--reformat $(ostdevname 1) $(ostvdevname 1)"
do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" &&
- skip "meta_bg already set" && return
+ skip "meta_bg already set"
local opts=ost_opts
if [[ ${!opts} != *mkfsoptions* ]]; then
echo "params: $opts"
+ load_modules
add ost1 $opts || error "add ost1 failed with new params"
do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" ||
error "meta_bg is not set"
-
- reformat
}
run_test 99 "Adding meta_bg option"
test_100() {
reformat
- start_mds || error "MDS start failed"
+
+ start_mgsmds || error "MDS start failed"
start_ost || error "unable to start OST"
mount_client $MOUNT || error "client start failed"
check_mount || error "check_mount failed"
# Desired output
# MGS:
# 0@lo
- # lustre-MDT0000:
+ # $FSNAME-MDT0000:
# 0@lo
- # lustre-OST0000:
+ # $FSNAME-OST0000:
# 0@lo
do_facet mgs 'lshowmount -v' | awk 'BEGIN {NR == 0; rc=1} /MGS:/ {rc=0}
END {exit rc}' || error "lshowmount have no output MGS"
run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
test_101() {
- local createmany_oid
+ local createmany_pid
local dev=$FSNAME-OST0000-osc-MDT0000
setup
- createmany -o $DIR1/$tfile-%d 50000 &
- createmany_oid=$!
+ mkdir $DIR1/$tdir
+ createmany -o $DIR1/$tdir/$tfile-%d 50000 &
+ createmany_pid=$!
# MDT->OST reconnection causes MDT<->OST last_id synchornisation
# via osp_precreate_cleanup_orphans.
for ((i = 0; i < 100; i++)); do
done
ls -asl $MOUNT | grep '???' &&
- (kill -9 $createmany_oid &>/dev/null; \
- error "File hasn't object on OST")
+ { kill -9 $createmany_pid &>/dev/null;
+ error "File has no object on OST"; }
- kill -s 0 $createmany_oid || break
+ kill -s 0 $createmany_pid || break
done
- wait $createmany_oid
+ wait $createmany_pid
+
+ unlinkmany $DIR1/$tdir/$tfile-%d 50000
cleanup
}
run_test 101 "Race MDT->OST reconnection with create"
test_102() {
+ [[ "$MDS1_VERSION" -gt $(version_code 2.9.53) ]] ||
+ skip "Need server version greater than 2.9.53"
+ [[ “$(mdsdevname 1)” != “$(mgsdevname)” ]] &&
+ [[ “$(facet_host mds1)” = “$(facet_host mgs)” ]] &&
+ skip "MGS must be on different node or combined"
+
cleanup || error "cleanup failed with $?"
local mds1dev=$(mdsdevname 1)
local mds1mnt=$(facet_mntpt mds1)
- local mds1fstype=$(facet_fstype mds1)
local mds1opts=$MDS_MOUNT_OPTS
- if [ $mds1fstype == ldiskfs ] &&
+ if [ "$mds1_FSTYPE" == ldiskfs ] &&
! do_facet mds1 test -b $mds1dev; then
mds1opts=$(csa_add "$mds1opts" -o loop)
fi
- if [[ $mds1fstype == zfs ]]; then
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
import_zpool mds1 || return ${PIPESTATUS[0]}
fi
echo "rename $FSNAME to $newname"
if ! combined_mgs_mds ; then
- local facet=$(mgsdevname)
+ local dev=$(mgsdevname)
do_facet mgs \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(7) Fail to rename MGS"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(7) Fail to rename MGS"
+ if [ "$(facet_fstype mgs)" = "zfs" ]; then
reimport_zpool mgs $newname-mgs
fi
fi
for num in $(seq $MDSCOUNT); do
- local facet=$(mdsdevname $num)
+ local dev=$(mdsdevname $num)
do_facet mds${num} \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(8) Fail to rename MDT $num"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(8) Fail to rename MDT $num"
+ if [ "$(facet_fstype mds${num})" = "zfs" ]; then
reimport_zpool mds${num} $newname-mdt${num}
fi
done
for num in $(seq $OSTCOUNT); do
- local facet=$(ostdevname $num)
+ local dev=$(ostdevname $num)
do_facet ost${num} \
- "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
- error "(9) Fail to rename OST $num"
- if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+ error "(9) Fail to rename OST $num"
+ if [ "$(facet_fstype ost${num})" = "zfs" ]; then
reimport_zpool ost${num} $newname-ost${num}
fi
done
cp $LUSTRE/tests/test-framework.sh $DIR/$tdir ||
error "(2) Fail to copy test-framework.sh"
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
do_facet mgs $LCTL pool_new $FSNAME.pool1 ||
error "(3) Fail to create $FSNAME.pool1"
# name the pool name as the fsname
test_103_set_pool $FSNAME OST0000
- $SETSTRIPE -p $FSNAME $DIR/$tdir/d0 ||
+ $LFS setstripe -p $FSNAME $DIR/$tdir/d0 ||
error "(6) Fail to setstripe on $DIR/$tdir/d0"
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
KEEP_ZPOOL=true
stopall
FSNAME="mylustre"
setupall
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
test_103_check_pool $save_fsname 7
if [ $OSTCOUNT -ge 2 ]; then
test_103_set_pool $save_fsname OST0001
fi
- $SETSTRIPE -p $save_fsname $DIR/$tdir/f0 ||
+ $LFS setstripe -p $save_fsname $DIR/$tdir/f0 ||
error "(16) Fail to setstripe on $DIR/$tdir/f0"
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
stopall
FSNAME="tfs"
setupall
- if ! combined_mgs_mds ; then
- mount_mgs_client
- fi
test_103_check_pool $save_fsname 17
- if ! combined_mgs_mds ; then
- umount_mgs_client
- fi
stopall
test_renamefs $save_fsname
}
run_test 103 "rename filesystem name"
-test_104() { # LU-6952
+test_104a() { # LU-6952
local mds_mountopts=$MDS_MOUNT_OPTS
local ost_mountopts=$OST_MOUNT_OPTS
local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
awk '{ print $2 }')
[[ $(version_code $lctl_ver) -lt $(version_code 2.9.55) ]] &&
- { skip "this test needs utils above 2.9.55" && return 0; }
+ skip "this test needs utils above 2.9.55"
# specify "acl" in mount options used by mkfs.lustre
if [ -z "$MDS_MOUNT_FS_OPTS" ]; then
#reformat/remount the MDT to apply the MDT_MOUNT_FS_OPT options
formatall
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+
if [ -z "$MDS_MOUNT_OPTS" ]; then
MDS_MOUNT_OPTS="-o noacl"
else
MDS_MOUNT_OPTS=$mds_mountopts
OST_MOUNT_OPTS=$ost_mountopts
MDS_MOUNT_FS_OPTS=$mds_mountfsopts
+}
+run_test 104a "Make sure user defined options are reflected in mount"
- formatall
- setupall
+test_104b() { # LU-12859
+ mount_client $MOUNT3 flock,localflock
+ stack_trap "umount_client $MOUNT3" EXIT
+ mount | grep "$MOUNT3 .*,flock" && error "flock is still set"
+ mount | grep "$MOUNT3 .*,localflock" || error "localflock is not set"
+ umount_client $MOUNT3
+ mount_client $MOUNT3 localflock,flock
+ mount | grep "$MOUNT3 .*,localflock" && error "localflock is still set"
+ mount | grep "$MOUNT3 .*,flock" || error "flock is not set"
+ umount_client $MOUNT3
+ mount_client $MOUNT3 localflock,flock,noflock
+ flock_is_enabled $MOUNT3 && error "some flock is still enabled" || true
}
-run_test 104 "Make sure user defined options are reflected in mount"
+run_test 104b "Mount uses last flock argument"
error_and_umount() {
umount $TMP/$tdir
test_105() {
cleanup -f
reformat
- setup
+ setup_noconfig
mkdir -p $TMP/$tdir
mount --bind $DIR $TMP/$tdir || error "mount bind mnt pt failed"
rm -f $TMP/$tdir/$tfile
local repeat=5
reformat
- setupall
+ setup_noconfig
mkdir -p $DIR/$tdir || error "create $tdir failed"
lfs setstripe -c 1 -i 0 $DIR/$tdir
#define OBD_FAIL_CAT_RECORDS 0x1312
#shows that osp code is buggy
do_facet mds1 $LCTL set_param fail_loc=0 fail_val=0
- stopall
+ cleanup
}
run_test 106 "check osp llog processing when catalog is wrapped"
test_107() {
- [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.10.50) ]] ||
- { skip "Need MDS version > 2.10.50"; return; }
+ [[ "$MDS1_VERSION" -ge $(version_code 2.10.50) ]] ||
+ skip "Need MDS version > 2.10.50"
+ local cmd
start_mgsmds || error "start_mgsmds failed"
start_ost || error "unable to start OST"
# add unknown configuration parameter.
- local PARAM="$FSNAME-OST0000.ost.unknown_param=50"
- do_facet mgs "$LCTL conf_param $PARAM"
+ if [[ $PERM_CMD == *"set_param -P"* ]]; then
+ cmd="$PERM_CMD ost.$FSNAME-OST0000*.unknown_param"
+ else
+ cmd="$PERM_CMD $FSNAME-OST0000*.ost.unknown_param"
+ fi
+ do_facet mgs "$cmd=50"
cleanup_nocli || error "cleanup_nocli failed with $?"
load_modules
$rcmd mkdir -p $tmp/{mnt,images} || error "failed to mkdir remotely"
for facet in $facets; do
- [ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
+ [ "$mds1_FSTYPE" = zfs ] &&
$rcmd $ZPOOL -f export lustre-$facet > /dev/null 2>&1
$rcmd mkdir $tmp/mnt/$facet ||
error "failed to mkdir $tmp/mnt/$facet"
for facet in $facets; do
$rcmd umount -f $tmp/mnt/$facet ||
error "failed to umount $facet"
- if [ $(facet_fstype $SINGLEMDS) = "zfs" ]; then
+ if [ "$mds1_FSTYPE" = zfs ]; then
$rcmd $ZPOOL export -f lustre-$facet ||
error "failed to export lustre-$facet"
fi
}
test_108a() {
- [ "$CLIENTONLY" ] && skip "Client-only testing" && return
-
- [ $(facet_fstype $SINGLEMDS) != "zfs" ] &&
- skip "zfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.58) ] &&
- skip "Need server version at least 2.10.58" && return
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+ [ "$mds1_FSTYPE" != zfs ] && skip "zfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.58) ] &&
+ skip "Need server version at least 2.10.58"
stopall
load_modules
echo "changing server nid..."
$rcmd mount -t lustre -o nosvc lustre-mdt1/mdt1 $tmp/mnt/mdt1
- $rcmd lctl replace_nids lustre-MDT0000 $nid
- $rcmd lctl replace_nids lustre-MDT0001 $nid
- $rcmd lctl replace_nids lustre-OST0000 $nid
- $rcmd lctl replace_nids lustre-OST0001 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0000 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0001 $nid
$rcmd umount $tmp/mnt/mdt1
for facet in $facets; do
run_test 108a "migrate from ldiskfs to ZFS"
test_108b() {
- [ "$CLIENTONLY" ] && skip "Client-only testing" && return
-
- [ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.58) ] &&
- skip "Need server version at least 2.10.58" && return
+ [ "$CLIENTONLY" ] && skip "Client-only testing"
+ [ "$mds1_FSTYPE" != ldiskfs ] && skip "ldiskfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.58) ] &&
+ skip "Need server version at least 2.10.58"
stopall
load_modules
$rcmd mount -t ldiskfs -o loop $tmp/images/$facet \
$tmp/mnt/$facet ||
error "failed to local mount $facet"
+
$rcmd tar jxf $LUSTRE/tests/zfs_${facet}_2_11.tar.bz2 \
--xattrs --xattrs-include="*.*" \
-C $tmp/mnt/$facet/ > /dev/null 2>&1 ||
echo "changing server nid..."
$rcmd mount -t lustre -o nosvc,loop $tmp/images/mdt1 $tmp/mnt/mdt1
- $rcmd lctl replace_nids lustre-MDT0000 $nid
- $rcmd lctl replace_nids lustre-MDT0001 $nid
- $rcmd lctl replace_nids lustre-OST0000 $nid
- $rcmd lctl replace_nids lustre-OST0001 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+ $rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0000 $nid
+ $rcmd lctl replace_nids $FSNAME-OST0001 $nid
$rcmd umount $tmp/mnt/mdt1
for facet in $facets; do
done
for facet in $scrub_list; do
- $rcmd $LCTL lfsck_start -M lustre-$facet -t scrub ||
+ $rcmd $LCTL lfsck_start -M $FSNAME-$facet -t scrub ||
error "failed to start OI scrub on $facet"
done
test_109_set_params() {
local fsname=$1
- set_conf_param_and_check mds \
- "$LCTL get_param -n mdd.$fsname-MDT0000.atime_diff" \
+ set_persistent_param_and_check mds \
+ "mdd.$fsname-MDT0000.atime_diff" \
"$fsname-MDT0000.mdd.atime_diff" \
"62"
- set_conf_param_and_check mds \
- "$LCTL get_param -n mdd.$fsname-MDT0000.atime_diff" \
+ set_persistent_param_and_check mds \
+ "mdd.$fsname-MDT0000.atime_diff" \
"$fsname-MDT0000.mdd.atime_diff" \
"63"
- set_conf_param_and_check client \
- "$LCTL get_param -n llite.$fsname*.max_read_ahead_mb" \
+ set_persistent_param_and_check client \
+ "llite.$fsname*.max_read_ahead_mb" \
"$fsname.llite.max_read_ahead_mb" \
"32"
- set_conf_param_and_check client \
- "$LCTL get_param -n llite.$fsname*.max_read_ahead_mb" \
+ set_persistent_param_and_check client \
+ "llite.$fsname*.max_read_ahead_mb" \
"$fsname.llite.max_read_ahead_mb" \
"64"
create_pool $fsname.pool1 || error "create pool failed"
local mgsdev
if ! combined_mgs_mds ; then
- mgsdev=$MGSDEV
+ mgsdev=$(mgsdevname)
stop_mgs || error "stop_mgs failed"
start_mgs "-o nosvc" || error "start_mgs nosvc failed"
else
test_109a()
{
- [ "$(facet_fstype mgs)" == "zfs" ] &&
- skip "LU-8727: no implementation for ZFS" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.59) ] &&
+ skip "Needs MDS version 2.10.59 or later."
+ [ "$(facet_fstype mgs)" == zfs ] &&
+ skip "LU-8727: no implementation for ZFS"
+
stopall
reformat
setup_noconfig
test_109b()
{
- [ "$(facet_fstype mgs)" == "zfs" ] &&
- skip "LU-8727: no implementation for ZFS" && return
+ [ $MDS1_VERSION -lt $(version_code 2.10.59) ] &&
+ skip "Needs MDS version 2.10.59 or later."
+ [ "$(facet_fstype mgs)" == zfs ] &&
+ skip "LU-8727: no implementation for ZFS"
+
stopall
reformat
setup_noconfig
error "failed to clear client config"
setup_noconfig
-
#
# check that configurations are intact
#
}
run_test 109b "test lctl clear_conf one config"
+test_110()
+{
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
+ skip "Only applicable to ldiskfs-based MDTs"
+
+ do_facet $SINGLEMDS $DEBUGFS -w -R supported_features |grep large_dir ||
+ skip "large_dir option is not supported on MDS"
+ do_facet ost1 $DEBUGFS -w -R supported_features | grep large_dir ||
+ skip "large_dir option is not supported on OSS"
+
+ stopall # stop all targets before modifying the target counts
+ local old_mdscount=$MDSCOUNT
+ local old_ostcount=$OSTCOUNT
+ local replace=""
+ stack_trap "MDSCOUNT=$old_mdscount OSTCOUNT=$old_ostcount" EXIT
+ MDSCOUNT=1
+ OSTCOUNT=1
+
+ # ext4_dir_entry_2 struct size:264
+ # dx_root struct size:8
+ # dx_node struct size:8
+ # dx_entry struct size:8
+ # For 1024 bytes block size.
+ # First level directory entries: 126
+ # Second level directory entries: 127
+ # Entries in leaf: 3
+ # For 2 levels limit: 48006
+ # For 3 levels limit : 6096762
+ # Create 80000 files to safely exceed 2-level htree limit.
+ CONF_SANITY_110_LINKS=${CONF_SANITY_110_LINKS:-80000}
+
+ # can fit at most 3 filenames per 1KB leaf block, but each
+ # leaf/index block will only be 3/4 full before split at each level
+ (( MDSSIZE < CONF_SANITY_110_LINKS / 3 * 4/3 * 4/3 )) &&
+ CONF_SANITY_110_LINKS=$((MDSSIZE * 3 * 3/4 * 3/4))
+
+ combined_mgs_mds || replace=" --replace "
+ local opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ $replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536\\\""
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir -b 1024 -i 65536 }"
+ fi
+ fi
+ echo "MDT params: $opts"
+ load_modules
+ combined_mgs_mds || start_mgs
+ add mds1 $opts || error "add mds1 failed with new params"
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+
+ opts="$(mkfs_opts ost1 $(ostdevname 1)) \
+ $replace --reformat $(ostdevname 1) $(ostvdevname 1)"
+
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir\\\" "
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir }"
+ fi
+ fi
+ echo "OST params: $opts"
+ add ost1 $opts || error "add ost1 failed with new params"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+
+ MOUNT_2=yes mountcli || error "mount clients failed"
+
+ mkdir -v $DIR/$tdir || error "cannot create $DIR/$tdir"
+ local pids count=0 group=0
+
+ echo "creating $CONF_SANITY_110_LINKS in total"
+ while (( count < CONF_SANITY_110_LINKS )); do
+ local len=$((253 - $(wc -c <<<"$tfile-$group-40000-")))
+ local dir=DIR$((group % 2 + 1))
+ local target=${!dir}/$tdir/$tfile-$group
+ local long=$target-$(generate_name $len)-
+ local create=$((CONF_SANITY_110_LINKS - count))
+
+ (( create > 40000 )) && create=40000
+ touch $target || error "creating $target failed"
+ echo "creating $create hard links to $target"
+ createmany -l $target $long $create &
+ pids+=" $!"
+
+ count=$((count + create))
+ group=$((group + 1))
+ done
+ echo "waiting for PIDs$pids to complete"
+ wait $pids || error "createmany failed after $group groups"
+
+ umount_client $MOUNT2 -f
+ cleanup
+
+ run_e2fsck $(facet_active_host mds1) $(mdsdevname 1) -n
+ MDSCOUNT=$old_mdscount
+ OSTCOUNT=$old_ostcount
+}
+run_test 110 "Adding large_dir with 3-level htree"
+
+test_111() {
+ [[ "$mds1_FSTYPE" != ldiskfs ]] &&
+ skip "Only applicable to ldiskfs-based MDTs"
+
+ is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
+ skip "This test can not be executed on flakey dev"
+
+ do_facet $SINGLEMDS $DEBUGFS -w -R supported_features |grep large_dir ||
+ skip "large_dir option is not supported on MDS"
+
+ do_facet ost1 $DEBUGFS -w -R supported_features | grep large_dir ||
+ skip "large_dir option is not supported on OSS"
+
+ # cleanup before changing target counts
+ cleanup
+ local old_mdscount=$MDSCOUNT
+ local old_ostcount=$OSTCOUNT
+ local old_mdssize=$MDSSIZE
+ local replace=""
+ stack_trap "MDSSIZE=$MDSSIZE MDSCOUNT=$MDSCOUNT OSTCOUNT=$OSTCOUNT" EXIT
+ MDSCOUNT=1
+ OSTCOUNT=1
+ (( MDSSIZE < 2400000 )) && MDSSIZE=2400000 # need at least 2.4GB
+
+ local mdsdev=$(mdsdevname 1)
+ combined_mgs_mds || replace=" --replace "
+ local opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ $replace --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir -i 1048576 \\\" "
+ else
+ opts="${opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O large_dir -i 1048576 }"
+ fi
+ fi
+ echo "MDT params: $opts"
+ load_modules
+ combined_mgs_mds || start_mgs
+ __touch_device mds 1
+ add mds1 $opts || error "add mds1 failed with new params"
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+
+ opts="$(mkfs_opts ost1 $(ostdevname 1)) \
+ $replace --reformat $(ostdevname 1) $(ostvdevname 1)"
+ if [[ $opts != *large_dir* ]]; then
+ if [[ $opts != *mkfsoptions* ]]; then
+ opts+=" --mkfsoptions=\\\"-O large_dir \\\""
+ else
+ opts="${opts//--mkfsoptions=\\\"/ --mkfsoptions=\\\"-O large_dir }"
+ fi
+ fi
+ echo "OST params: $opts"
+ __touch_device ost 1
+ add ost1 $opts || error "add ost1 failed with new params"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
+
+ MOUNT_2=yes mountcli
+ mkdir $DIR/$tdir || error "cannot create $DIR/$tdir"
+ lfs df $DIR/$tdir
+ lfs df -i $DIR/$tdir
+
+ local group=0
+
+ local start=$SECONDS
+ local dirsize=0
+ local dirmax=$((2 << 30))
+ local needskip=0
+ local taken=0
+ local rate=0
+ local left=0
+ local num=0
+ while (( !needskip & dirsize < dirmax )); do
+ local pids=""
+
+ for cli in ${CLIENTS//,/ }; do
+ local len=$((253 - $(wc -c <<<"$cli-$group-60000-")))
+ local target=$cli-$group
+ local long=$DIR/$tdir/$target-$(generate_name $len)-
+
+ RPWD=$DIR/$tdir do_node $cli touch $target ||
+ error "creating $target failed"
+ echo "creating 60000 hardlinks to $target"
+ RPWD=$DIR/$tdir do_node $cli createmany -l $target $long 60000 &
+ pids+=" $!"
+
+ group=$((group + 1))
+ target=$cli-$group
+ long=$DIR2/$tdir/$target-$(generate_name $len)-
+
+ RPWD=$DIR2/$tdir do_node $cli touch $target ||
+ error "creating $target failed"
+ echo "creating 60000 hardlinks to $target"
+ RPWD=$DIR2/$tdir do_node $cli createmany -l $target $long 60000 &
+ pids+=" $!"
+
+ group=$((group + 1))
+ done
+ echo "waiting for PIDs$pids to complete"
+ wait $pids || error "createmany failed after $group groups"
+ dirsize=$(stat -c %s $DIR/$tdir)
+ taken=$((SECONDS - start))
+ rate=$((dirsize / taken))
+ left=$(((dirmax - dirsize) / rate))
+ num=$((group * 60000))
+ echo "estimate ${left}s left after $num files / ${taken}s"
+ # if the estimated time remaining is too large (it may change
+ # over time as the create rate is not constant) then exit
+ # without declaring a failure.
+ (( left > 1200 )) && needskip=1
+ done
+
+ umount_client $MOUNT2 -f
+ cleanup
+
+ (( $needskip )) && skip "ETA ${left}s after $num files / ${taken}s is too long"
+
+ run_e2fsck $(facet_active_host mds1) $(mdsdevname 1) -n
+ MDSCOUNT=$old_mdscount
+ OSTCOUNT=$old_ostcount
+ MDSSIZE=$old_mdssize
+}
+run_test 111 "Adding large_dir with over 2GB directory"
+
+test_112() {
+ start_mds || error "MDS start failed"
+ start_ost || error "OSS start failed"
+ echo "start ost2 service on $(facet_active_host ost2)"
+ start ost2 $(ostdevname 2) $(csa_add "$OST_MOUNT_OPTS" -o no_precreate) ||
+ error "start ost2 facet failed"
+ local val=$(do_facet ost2 \
+ "$LCTL get_param -n obdfilter.$FSNAME-OST0001*.no_precreate")
+ (( $val == 1 )) || error "obdfilter.$FSNAME-OST0001*.no_precreate=$val"
+
+ mount_client $MOUNT || error "mount client failed"
+ wait_osc_import_state client ost2 FULL
+
+ $LFS setstripe -i 0 $DIR/$tfile.0 ||
+ error "problem creating $tfile.0 on OST0000"
+ $LFS setstripe -i 1 $DIR/$tfile.1 && $LFS getstripe $DIR/$tfile.1 &&
+ (( $($LFS getstripe -i $DIR/$tfile.1) == 1 )) &&
+ error "allowed to create $tfile.1 on OST0001"
+ do_facet ost2 $LCTL set_param obdfilter.*.no_precreate=0
+ sleep_maxage
+ $LFS setstripe -i 1 $DIR/$tfile.2 ||
+ error "failed to create $tfile.2 on ost1 facet"
+ stop_ost2 || error "stop ost2 facet failed"
+ cleanup
+}
+run_test 112 "mount OST with nocreate option"
+
cleanup_115()
{
trap 0
stopall
rm -f $TMP/$tdir/lustre-mdt
- formatall
}
test_115() {
- IMAGESIZE=$((3072 << 30)) # 3072 GiB
-
- if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ if [ "$mds1_FSTYPE" != ldiskfs ]; then
skip "Only applicable to ldiskfs-based MDTs"
- return
fi
+ [ -n "$FILESET" ] && skip "Not functional for FILESET set"
+
+ local dbfs_ver=$(do_facet $SINGLEMDS $DEBUGFS -V 2>&1)
+
+ echo "debugfs version: $dbfs_ver"
+ echo "$dbfs_ver" | egrep -w "1.44.3.wc1|1.44.5.wc1|1.45.2.wc1" &&
+ skip_env "This version of debugfs doesn't show inode number"
+
+ is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
+ skip "This test can not be executed on flakey dev"
+
+ IMAGESIZE=$((3072 << 30)) # 3072 GiB
stopall
+
+ echo "client1: "
+ lctl dl
+ mount | grep lustre
+ echo "mds1: "
+ do_facet mds1 "hostname; ifconfig; lctl dl; mount"
+ echo "ost1: "
+ do_facet ost1 "hostname; ifconfig; lctl dl; mount"
# We need MDT size 3072GB, because it is smallest
# partition that can store 2B inodes
do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
do_facet $SINGLEMDS "touch $mdsimgname"
trap cleanup_115 RETURN EXIT
do_facet $SINGLEMDS "$TRUNCATE $mdsimgname $IMAGESIZE" ||
- { skip "Backend FS doesn't support sparse files"; return 0; }
+ skip "Backend FS doesn't support sparse files"
local mdsdev=$(do_facet $SINGLEMDS "losetup -f")
do_facet $SINGLEMDS "losetup $mdsdev $mdsimgname"
- local mds_opts="$(mkfs_opts mds1 ${mdsdev}) --device-size=$IMAGESIZE \
- --mkfsoptions='-O lazy_itable_init,large_xattr,^resize_inode,meta_bg \
- -i 1024'"
+ local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ --mkfsoptions='-O ea_inode,^resize_inode,meta_bg \
+ -N 2247484000 -E lazy_itable_init' --device-size=$IMAGESIZE"
add mds1 $mds_opts --mgs --reformat $mdsdev ||
- { skip_env "format large MDT failed"; return 0; }
- add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
- --reformat $(ostdevname 1) $(ostvdevname 1)
-
- start $SINGLEMDS ${mdsdev} $MDS_MOUNT_OPTS || error "start MDS failed"
+ skip_env "format large MDT failed"
+ opts="$(mkfs_opts ost1 $(ostdevname 1)) \
+ $replace --reformat $(ostdevname 1) $(ostvdevname 1)"
+ add ost1 $opts || error "add ost1 failed with new params"
+ start $SINGLEMDS $mdsdev $MDS_MOUNT_OPTS || error "start MDS failed"
start_ost || error "start OSS failed"
mount_client $MOUNT || error "mount client failed"
mkdir -p $DIR/$tdir || error "mkdir $DIR/$tdir fail"
- for goal in $(do_facet $SINGLEMDS "ls /sys/fs/ldiskfs/*/inode_goal"); do
- do_facet $SINGLEMDS "echo 2147483947 >> $goal; grep . $goal"
- done
-
+ goal="/sys/fs/ldiskfs/$(basename $mdsdev)/inode_goal"
+echo goal: $goal
+ # 2147483648 is 0x80000000
+ do_facet $SINGLEMDS "echo 2147483648 >> $goal; grep . $goal"
touch $DIR/$tdir/$tfile
- # Add > 5k bytes to xattr
- for i in {1..30}; do
- ln $DIR/$tdir/$tfile $DIR/$tdir/$(printf "link%0250d" $i) ||
- error "Can't make link"
+ # attrs from 1 to 15 go to block, 16th - to inode
+ for i in {1..16}; do
+ local nm="trusted.ea$i"
+ setfattr -n $nm -v $(printf "xattr%0250d" $i) $DIR/$tdir/$tfile
done
- sync; sleep 5; sync
-
+ # inode <2147483649> trusted.ea16 (255)
local inode_num=$(do_facet $SINGLEMDS \
- "$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsimgname" |
- awk '/link =/ { print $4 }' |
+ "$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev" |
+ awk '/ea16/ { print $2 }' |
sed -e 's/>//' -e 's/<//' -e 's/\"//')
echo "inode num: $inode_num"
- [ $inode_num -ge 2147483947 ] || error "inode $inode_num too small"
+ [ $inode_num -ge 2147483648 ] || error "inode $inode_num too small"
do_facet $SINGLEMDS "losetup -d $mdsdev"
cleanup_115
}
run_test 115 "Access large xattr with inodes number over 2TB"
test_116() {
- [ $(facet_fstype $SINGLEMDS) != "ldiskfs" ] &&
- skip "ldiskfs only test" && return
-
- [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.59) ] &&
- skip "Need server version at least 2.10.59" && return
+ [ "$mds1_FSTYPE" != ldiskfs ] && skip "ldiskfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.10.59) ] &&
+ skip "Need server version at least 2.10.59"
+ do_facet $SINGLEMDS which mkfs.xfs ||
+ skip_env "No mkfs.xfs installed"
stopall
load_modules
- local tmpmnt=/mnt/$tdir
+ local tmpmnt=$TMP/$tdir
local mdtimg=$tfile-mdt0
do_facet $SINGLEMDS mkdir -p $tmpmnt
do_facet $SINGLEMDS $TUNE2FS -l $tmpmnt/$mdtimg |
grep -qw 'features.*extent' || error "extent should be enabled"
+ reformat_and_config
}
run_test 116 "big size MDT support"
+test_117() {
+ setup
+ do_facet ost1 "$LCTL set_param ost.OSS.ost_io.nrs_policies=fifo"
+ do_facet ost1 "$LCTL get_param -n ost.OSS.ost_io.nrs_tbf_rule" &&
+ error "get_param should fail"
+ cleanup || error "cleanup failed with rc $?"
+}
+run_test 117 "lctl get_param return errors properly"
+
+test_120() { # LU-11130
+ [ "$MDSCOUNT" -lt 2 ] && skip "mdt count < 2"
+ [ "$mds1_FSTYPE" != ldiskfs ] &&
+ skip "ldiskfs only test"
+ [ "$MDS1_VERSION" -lt $(version_code 2.11.56) ] &&
+ skip "Need DNE2 capable MD target with LU-11130 fix"
+
+ setup
+
+ local mds1host=$(facet_active_host mds1)
+ local mds1dev=$(mdsdevname 1)
+
+ $LFS mkdir -i 1 $DIR/$tdir
+ $LFS mkdir -i 0 $DIR/$tdir/mds1dir
+
+ ln -s foo $DIR/$tdir/bar
+ mv $DIR/$tdir/bar $DIR/$tdir/mds1dir/bar2 ||
+ error "cross-target rename failed"
+
+ stopall
+
+ run_e2fsck $mds1host $mds1dev "-n"
+}
+run_test 120 "cross-target rename should not create bad symlinks"
+
+test_122() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
+
+ reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ setup_noconfig
+ $LFS mkdir -i1 -c1 $DIR/$tdir
+ $LFS setstripe -i0 -c1 $DIR/$tdir
+ do_facet ost1 $LCTL set_param fail_loc=0
+ createmany -o $DIR/$tdir/file_ 1000 ||
+ error "Fail to create a new sequence"
+
+ cleanup
+}
+run_test 122 "Check OST sequence update"
+
+test_123aa() {
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ -d $MOUNT/.lustre ] || setup
+
+ # test old logid format until removal from llog_ioctl.c::str2logid()
+ if [ $MGS_VERSION -lt $(version_code 3.1.53) ]; then
+ do_facet mgs $LCTL dl | grep MGS
+ do_facet mgs "$LCTL --device %MGS llog_print \
+ \\\\\\\$$FSNAME-client 1 10" ||
+ error "old llog_print failed"
+ fi
+
+ # test new logid format
+ if [ $MGS_VERSION -ge $(version_code 2.9.53) ]; then
+ do_facet mgs "$LCTL --device MGS llog_print $FSNAME-client" ||
+ error "new llog_print failed"
+ fi
+}
+run_test 123aa "llog_print works with FIDs and simple names"
+
+test_123ab() {
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [[ $MGS_VERSION -gt $(version_code 2.11.51) ]] ||
+ skip "Need server with working llog_print support"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ local yaml
+ local orig_val
+
+ orig_val=$(do_facet mgs $LCTL get_param jobid_name)
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME"
+
+ yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep jobid_name | tail -n 1)
+
+ local param=$(awk '{ print $10 }' <<< "$yaml")
+ local val=$(awk '{ print $12 }' <<< "$yaml")
+ #return to the default
+ do_facet mgs $LCTL set_param -P jobid_name=$orig_val
+ [ $val = "TESTNAME" ] || error "bad value: $val"
+ [ $param = "jobid_name," ] || error "Bad param: $param"
+}
+run_test 123ab "llog_print params output values from set_param -P"
+
+test_123ac() { # LU-11566
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ do_facet mgs "$LCTL help llog_print" 2>&1 | grep -q -- --start ||
+ skip "Need 'lctl llog_print --start' on MGS"
+
+ local start=10
+ local end=50
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ # - { index: 10, event: add_uuid, nid: 192.168.20.1@tcp(0x20000c0a81401,
+ # node: 192.168.20.1@tcp }
+ do_facet mgs $LCTL --device MGS \
+ llog_print --start $start --end $end $FSNAME-client | tr -d , |
+ while read DASH BRACE INDEX idx EVENT BLAH BLAH BLAH; do
+ (( idx >= start )) || error "llog_print index $idx < $start"
+ (( idx <= end )) || error "llog_print index $idx > $end"
+ done
+}
+run_test 123ac "llog_print with --start and --end"
+
+test_123ad() { # LU-11566
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ # older versions of lctl may not print all records properly
+ do_facet mgs "$LCTL help llog_print" 2>&1 | grep -q -- --start ||
+ skip "Need 'lctl llog_print --start' on MGS"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ # append a new record, to avoid issues if last record was cancelled
+ local old=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$old
+
+ # logid: [0x3:0xa:0x0]:0
+ # flags: 4 (plain)
+ # records_count: 72
+ # last_index: 72
+ local num=$(do_facet mgs $LCTL --device MGS llog_info $FSNAME-client |
+ awk '/last_index:/ { print $2 - 1 }')
+
+ # - { index: 71, event: set_timeout, num: 0x14, param: sys.timeout=20 }
+ local last=$(do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ (( last == num )) || error "llog_print only showed $last/$num records"
+}
+run_test 123ad "llog_print shows all records"
+
+test_123ae() { # LU-11566
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ [ -d $MOUNT/.lustre ] || setupall
+
+ local max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+
+ if do_facet mgs "$LCTL help llog_cancel" 2>&1| grep -q -- --log_id; then
+ # save one set_param -P record in case none exist
+ do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
+
+ local log=params
+ local orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
+ do_facet mgs $LCTL --device MGS llog_print $log | tail -1 |
+ grep "parameter: osc.*.max_dirty_mb" ||
+ error "new set_param -P wasn't stored in params log"
+
+ # - { index: 71, event: set_param, device: general,
+ # param: osc.*.max_dirty_mb, value: 256 }
+ local id=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+
+ do_facet mgs $LCTL --device MGS llog_cancel $log --log_idx=$id
+ local new=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ (( new == orig )) ||
+ error "new llog_cancel now $new, not at $orig records"
+ fi
+
+ # test old positional parameters for a while still
+ if [ "$MGS_VERSION" -le $(version_code 3.1.53) ]; then
+ log=$FSNAME-client
+ orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$max
+ do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | grep "parameter: osc.max_dirty_mb" ||
+ error "old conf_param wasn't stored in params log"
+
+ # - { index: 71, event: conf_param, device: testfs-OST0000-osc,
+ # param: osc.max_dirty_mb=256 }
+ id=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL --device MGS llog_cancel $log $id
+ new=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ (( new == orig )) ||
+ error "old llog_cancel now $new, not at $orig records"
+ fi
+}
+run_test 123ae "llog_cancel can cancel requested record"
+
+test_123F() {
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+
+ [ -d $MOUNT/.lustre ] || setup
+ local yaml_file="$TMP/$tfile.yaml"
+ do_facet mgs rm "$yaml_file"
+ local cfgfiles=$(do_facet mgs "lctl --device MGS llog_catlist" |
+ sed 's/config_log://')
+
+ # set jobid_var to a different value for test
+ local orig_val=$(do_facet mgs $LCTL get_param jobid_var)
+ do_facet mgs $LCTL set_param -P jobid_var="TESTNAME"
+
+ for i in $cfgfiles params; do
+ do_facet mgs "lctl --device MGS llog_print ${i} >> $yaml_file"
+ done
+
+ echo "Unmounting FS"
+ stopall
+ echo "Writeconf"
+ writeconf_all
+ echo "Remounting"
+ mountmgs
+ mountmds
+ mountoss
+ mountcli
+
+ # Reapply the config from before
+ echo "Setting configuration parameters"
+ do_facet mgs "lctl set_param -F $yaml_file"
+
+ local set_val=$(do_facet mgs $LCTL get_param jobid_var)
+ do_facet mgs $LCTL set_param -P $orig_val
+
+ [ $set_val == "jobid_var=TESTNAME" ] ||
+ error "$set_val is not TESTNAME"
+
+ do_facet mgs rm "$yaml_file"
+ cleanup
+}
+run_test 123F "clear and reset all parameters using set_param -F"
+
+test_124()
+{
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ [ -z $mds2failover_HOST ] && skip "needs MDT failover setup"
+
+ setup
+ cleanup
+
+ load_modules
+ if combined_mgs_mds; then
+ start_mdt 1 "-o nosvc" ||
+ error "starting mds with nosvc option failed"
+ fi
+ local nid=$(do_facet mds2 $LCTL list_nids | head -1)
+ local failover_nid=$(do_node $mds2failover_HOST $LCTL list_nids | head -1)
+ do_facet mgs $LCTL replace_nids $FSNAME-MDT0001 $nid:$failover_nid ||
+ error "replace_nids execution error"
+
+ if combined_mgs_mds; then
+ stop_mdt 1
+ fi
+
+ setup
+ fail mds2
+ echo "lfs setdirstripe"
+ $LFS setdirstripe -i 1 $MOUNT/$tdir || error "setdirstirpe error"
+ echo ok
+}
+run_test 124 "check failover after replace_nids"
+
+get_max_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_sectors_path="/sys/block/${dev_base}/queue/max_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_sectors_path} ]] &&
+ cat ${max_sectors_path}"
+}
+
+get_max_hw_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_hw_path="/sys/block/${dev_base}/queue/max_hw_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_hw_path} ]] && cat ${max_hw_path}"
+}
+
+set_max_sectors_kb() {
+ local facet="$1"
+ local device="$2"
+ local value="$3"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local max_sectors_path="/sys/block/${dev_base}/queue/max_sectors_kb"
+
+ do_facet ${facet} "[[ -e ${max_sectors_path} ]] &&
+ echo ${value} > ${max_sectors_path}"
+ rc=$?
+
+ [[ $rc -ne 0 ]] && echo "Failed to set ${max_sectors_path} to ${value}"
+
+ return $rc
+}
+
+# Return 0 if all slave devices have max_sectors_kb == max_hw_sectors_kb
+# Otherwise return > 0
+check_slaves_max_sectors_kb()
+{
+ local facet="$1"
+ local device="$2"
+ local dev_base=$(basename $(do_facet ${facet} "readlink -f ${device}"))
+ local slaves_dir=/sys/block/${dev_base}/slaves
+ local slave_devices=$(do_facet ${facet} "ls ${slaves_dir} 2>/dev/null")
+ [[ -z ${slave_devices} ]] && return 0
+
+ local slave max_sectors new_max_sectors max_hw_sectors path
+ local rc=0
+ for slave in ${slave_devices}; do
+ path="/dev/${slave}"
+ ! is_blkdev ${facet} ${path} && continue
+ max_sectors=$(get_max_sectors_kb ${facet} ${path})
+ max_hw_sectors=$(get_max_hw_sectors_kb ${facet} ${path})
+ new_max_sectors=${max_hw_sectors}
+ [[ ${new_max_sectors} -gt ${RQ_SIZE_LIMIT} ]] &&
+ new_max_sectors=${RQ_SIZE_LIMIT}
+
+ if [[ ${max_sectors} -ne ${new_max_sectors} ]]; then
+ echo "${path} ${max_sectors} ${new_max_sectors}"
+ ((rc++))
+ fi
+ check_slaves_max_sectors_kb ${facet} ${path}
+ ((rc + $?))
+ done
+
+ return $rc
+}
+
+test_125()
+{
+ local facet_list="mgs mds1 ost1"
+ combined_mgs_mds && facet_list="mgs ost1"
+
+ local facet
+ for facet in ${facet_list}; do
+ [[ $(facet_fstype ${facet}) != ldiskfs ]] &&
+ skip "ldiskfs only test" &&
+ return 0
+ ! is_blkdev ${facet} $(facet_device ${facet}) &&
+ skip "requires all real devices" &&
+ return 0
+ done
+
+ local rc=0
+ # We don't increase IO request size limit past 16MB. See comments in
+ # lustre/utils/libmount_utils_ldiskfs.c:tune_max_sectors_kb()
+ RQ_SIZE_LIMIT=$((16 * 1024))
+ local device old_max_sectors new_max_sectors max_hw_sectors
+ for facet in ${facet_list}; do
+ device=$(facet_device ${facet})
+ old_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+ max_hw_sectors=$(get_max_hw_sectors_kb ${facet} ${device})
+
+ # The expected value after l_tunedisk is executed
+ new_max_sectors=$old_max_sectors
+ [[ ${new_max_sectors_kb} -gt ${RQ_SIZE_LIMIT} ]] &&
+ new_max_sectors_kb=${RQ_SIZE_LIMIT}
+
+ # Ensure the current value of max_sectors_kb does not equal
+ # max_hw_sectors_kb, so we can tell whether l_tunedisk did
+ # anything
+ set_max_sectors_kb ${facet} ${device} $((new_max_sectors - 1))
+
+ # Value before l_tunedisk
+ local pre_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+ if [[ ${pre_max_sectors} -ne $((new_max_sectors - 1)) ]]; then
+ echo "unable to satsify test pre-condition:"
+ echo "${pre_max_sectors} != $((new_max_sectors - 1))"
+ ((rc++))
+ continue
+ fi
+
+ echo "Before: ${facet} ${device} ${pre_max_sectors} ${max_hw_sectors}"
+
+ do_facet ${facet} "libtool execute l_tunedisk ${device}"
+
+ # Value after l_tunedisk
+ local post_max_sectors=$(get_max_sectors_kb ${facet} ${device})
+
+ echo "After: ${facet} ${device} ${post_max_sectors} ${max_hw_sectors}"
+
+ if [[ ${facet} != ost1 ]]; then
+ if [[ ${post_max_sectors} -ne ${pre_max_sectors} ]]; then
+ echo "l_tunedisk modified max_sectors_kb of ${facet}"
+ ((rc++))
+ fi
+
+ set_max_sectors_kb ${facet} ${device} ${old_max_sectors}
+ else
+ if [[ ${post_max_sectors} -eq ${pre_max_sectors} ]]; then
+ echo "l_tunedisk failed to modify max_sectors_kb of ${facet}"
+ ((rc++))
+ fi
+
+ check_slaves_max_sectors_kb ${facet} ${device} ||
+ ((rc++))
+ fi
+ done
+
+ return $rc
+}
+run_test 125 "check l_tunedisk only tunes OSTs and their slave devices"
+
+test_126() {
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.52) ]] ||
+ skip "Need MDS version at least 2.13.52"
+
+ cleanup
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ../libcfs/libcfs/libcfs
+ #define OBD_FAIL_OBD_SETUP 0x60d
+ do_facet mds1 $LCTL set_param fail_loc=0x60d
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_modules &
+ for i in {1..40}; do
+ do_facet mds1 lsmod | grep -q osd_$mds1_FSTYPE && break
+ sleep 1
+ done
+ clear_failloc $SINGLEMDS 20 &
+ start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+}
+run_test 126 "mount in parallel shouldn't cause a crash"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff