ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
# bug number for skipped test: LU-11915
-ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110 115"
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
if $SHARED_KEY; then
run_test 5h "start mdt failure at mdt_fs_setup()"
test_5i() {
+ (( $MDS1_VERSION >= $(version_code 2.12.54) )) ||
+ skip "Need MDS version at least 2.12.54"
+
setup
stop mds1
}
run_test 9 "test ptldebug and subsystem for mkfs"
+test_10a() {
+ setup
+
+ if ! combined_mgs_mds; then
+ files=$(do_facet mgs "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MGS $files is a broken symlink"
+ fi
+
+ files=$(do_facet mds1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MDS $files is a broken symlink"
+
+ files=$(do_facet ost1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "OSS $files is a broken symlink"
+
+ files=$(do_facet client "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "clients $files is a broken symlink"
+
+ cleanup || error "cleanup failed with rc $?"
+}
+run_test 10a "find lctl param broken symlinks"
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
- add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
- $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
+ add $SINGLEMDS $(mds2failover_HOST="" \
+ mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
error_noexit "Mkfs new MDT failed"
return 1
}
shall_cleanup_lustre=true
$r $LCTL set_param debug="$PTLDEBUG"
- # Leave re-enabling this to a separate patch for LU-11558
- # t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
- # error_noexit "verify quota failed"
- # return 1
- #}
+ t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
+ error_noexit "verify quota failed"
+ return 1
+ }
if $r test -f $tmp/list; then
#
echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
- mkdir $DIR/$tdir-rootdir || error "mkdir failed"
+ mkdir_on_mdt0 $DIR/$tdir-rootdir || error "mkdir failed"
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
start_ost2 || error "Unable to start OST2"
mount_client $MOUNT || error "client start failed"
- mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
if [[ $PERM_CMD == *"set_param -P"* ]]; then
$PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&
if [ $num_create -gt 0 ]; then
# Check the number of inodes available on OST0
local files=0
- local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
- log "On OST0, $ifree inodes available. Want $num_create."
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
$LFS setstripe -i 0 $DIR/$tdir ||
error "$LFS setstripe -i 0 $DIR/$tdir failed"
local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
- local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
- log "On OST0, $iused used inodes"
+ local iused=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $3 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $iused used inodes rc=$?"
[ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
error "OST replacement created too many inodes; $iused"
cleanup || error "cleanup failed with $?"
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# Create a new pool and add OSTs into it.
stopall
- [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
# Check that parameters are added correctly
echo "tunefs --param $key=$val1"
- do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val1 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that parameters replace existing instances when added
echo "tunefs --param $key=$val2"
- do_facet mds "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val2 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that a parameter is erased properly
echo "tunefs --erase-param $key"
- do_facet mds "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
error "tunefs --erase-param $key failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
error "on-disk parameter not erased correctly via tunefs"
# Check that all the parameters are erased
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ error "tunefs --param $key=$val1 failed"
echo "tunefs --erase-params"
- do_facet mds "$TUNEFS --erase-params $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-params $mdsdev >/dev/null" ||
error "tunefs --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
- [ -z $params ] ||
- error "all on-disk parameters not erased correctly via tunefs"
+ params=$(echo $params | tr ' ' '\n')
+ [ -z "$params" ] ||
+ error "all on-disk parameters not erased correctly via tunefs $params"
# Check the order of options --erase-params and --param
echo "tunefs --param $key=$val1 --erase-params"
- do_facet mds \
+ do_facet mds1 \
"$TUNEFS --param $key=$val1 --erase-params $mdsdev >/dev/null"||
error "tunefs --param $key=$val1 --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
local ldevconfpath=$1
local fstype=
local fsldevformat=""
- touch $ldevconfpath
+ rm -f $ldevconfpath
- fstype=$(facet_fstype mgs)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
+ local facets="mgs,$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
fsldevformat=""
- fi
-
- printf "%s\t-\t%s-MGS0000\t%s%s\n" \
- $mgs_HOST \
- $FSNAME \
- $fsldevformat \
- $(mgsdevname) > $ldevconfpath
-
- local mdsfo_host=$mdsfailover_HOST;
- if [ -z "$mdsfo_host" ]; then
- mdsfo_host="-"
- fi
-
- for num in $(seq $MDSCOUNT); do
- fstype=$(facet_fstype mds$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
+ fstype=$(facet_fstype $facet)
+ [ "$fstype" = zfs ] && fsldevformat="$fstype:"
+ local host=$(facet_host $facet)
+ local fo="-"
+ local varfo=${facet}failover_HOST
+ if [ $facet == mgs ] && combined_mgs_mds; then
+ varfo=mds1failover_HOST
fi
-
- printf "%s\t%s\t%s-MDT%04d\t%s%s\n" \
- $mds_HOST \
- $mdsfo_host \
+ [ -n "${!varfo}" ] && fo=${!varfo}
+ local type=$(echo $facet | tr -d "[:digit:]" | \
+ tr "[:lower:]" "[:upper:]" | sed s/MDS/MDT/ )
+ local num=1
+ [ ${facet} == mgs ] ||
+ num=$(facet_number $facet)
+ printf "%s\t%s\t%s-%s%04x\t%s%s\n" \
+ ${host} \
+ ${fo} \
$FSNAME \
- $num \
+ $type \
+ $(( num - 1 )) \
$fsldevformat \
- $(mdsdevname $num) >> $ldevconfpath
- done
-
- local ostfo_host=$ostfailover_HOST;
- if [ -z "$ostfo_host" ]; then
- ostfo_host="-"
- fi
-
- for num in $(seq $OSTCOUNT); do
- fstype=$(facet_fstype ost$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
- fi
-
- printf "%s\t%s\t%s-OST%04d\t%s%s\n" \
- $ost_HOST \
- $ostfo_host \
- $FSNAME \
- $num \
- $fsldevformat \
- $(ostdevname $num) >> $ldevconfpath
+ $(facet_device $facet) >> $ldevconfpath
done
echo "----- $ldevconfpath -----"
}
compare_ldev_output() {
- ldev_output=$1
- expected_output=$2
+ local ldev_output=$1
+ local expected_output=$2
sort $expected_output -o $expected_output
sort $ldev_output -o $ldev_output
generate_nids $NIDSPATH
# echo the mgs nid and compare it to environment variable MGSNID
- # also, ldev.conf and nids is a server side thing, use the OSS
- # hostname
- local output
- output=$($LDEV -c $LDEVCONFPATH -H $ost_HOST -n $NIDSPATH echo %m)
-
- echo "-- START OF LDEV OUTPUT --"
- echo -e "$output"
- echo "--- END OF LDEV OUTPUT ---"
-
- # ldev failed, error
- if [ $? -ne 0 ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed to execute!"
- fi
-
- # need to process multiple lines because of combined MGS and MDS
- echo -e $output | awk '{ print $2 }' | while read -r line ; do
- if [ "$line" != "$MGSNID" ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed mgs nid '$line', expected '$MGSNID'"
- fi
+ local facets="$(get_facets OST),$(get_facets MDS),mgs"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ local output=$($LDEV -c $LDEVCONFPATH -H $host -n $NIDSPATH echo %m)
+
+ echo "-- START OF LDEV OUTPUT --"
+ echo -e "$output"
+ echo "--- END OF LDEV OUTPUT ---"
+
+ [ -z "$output" ] &&
+ error "ldev failed to execute!"
+
+ # need to process multiple lines because of
+ # several targets on host
+ echo -e $output | awk '{ print $2 }' | while read -r line ; do
+ [ "$line" = "$MGSNID" ] ||
+ error "ldev failed mgs nid '$line', \
+ expected '$MGSNID'"
+ done
done
-
- rm $LDEVCONFPATH $NIDSPATH
+ rm -f $LDEVCONFPATH $NIDSPATH
}
run_test 92 "ldev returns MGS NID correctly in command substitution"
printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
echo "$mgs_HOST-$(facet_fstype mgs)" > $EXPECTED_OUTPUT
- if [ "$mgs_HOST" == "$mds_HOST" ]; then
- for num in $(seq $MDSCOUNT); do
- echo "$mds_HOST-$(facet_fstype mds$num)" \
- >> $EXPECTED_OUTPUT
- done
- fi
-
- if [ "$mgs_HOST" == "$ost_HOST" ]; then
- for num in $(seq $OSTCOUNT); do
- echo "$ost_HOST-$(facet_fstype ost$num)" \
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ [ "$mgs_HOST" == "$host" ] &&
+ echo "$host-$(facet_fstype $facet)" \
>> $EXPECTED_OUTPUT
- done
- fi
+ done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
fi
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
rm $EXPECTED_OUTPUT
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
}
run_test 108b "migrate from ZFS to ldiskfs"
-
#
# set number of permanent parameters
#
echo "$dbfs_ver" | egrep -w "1.44.3.wc1|1.44.5.wc1|1.45.2.wc1" &&
skip_env "This version of debugfs doesn't show inode number"
- is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
- skip "This test can not be executed on flakey dev"
-
IMAGESIZE=$((3072 << 30)) # 3072 GiB
stopall
+ local saved_flakey=${FLAKEY}
+ stack_trap "FLAKEY=$saved_flakey" EXIT
+ FLAKEY=false
+
echo "client1: "
lctl dl
mount | grep lustre
echo "mds1: "
- do_facet mds1 "hostname; ifconfig; lctl dl; mount"
+ do_facet mds1 "hostname; lctl dl; mount"
echo "ost1: "
- do_facet ost1 "hostname; ifconfig; lctl dl; mount"
+ do_facet ost1 "hostname; lctl dl; mount"
# We need MDT size 3072GB, because it is smallest
# partition that can store 2B inodes
do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
mkdir -p $DIR/$tdir || error "mkdir $DIR/$tdir fail"
goal="/sys/fs/ldiskfs/$(basename $mdsdev)/inode_goal"
-echo goal: $goal
+ echo goal: $goal
# 2147483648 is 0x80000000
do_facet $SINGLEMDS "echo 2147483648 >> $goal; grep . $goal"
touch $DIR/$tdir/$tfile
- # attrs from 1 to 15 go to block, 16th - to inode
- for i in {1..16}; do
+ # attrs from 1 to 16 go to block, 17th - to inode
+ for i in {1..17}; do
local nm="trusted.ea$i"
setfattr -n $nm -v $(printf "xattr%0250d" $i) $DIR/$tdir/$tfile
done
+ do_facet $SINGLEMDS $DEBUGFS -c -R "stat ROOT/$tdir/$tfile" $mdsdev
+
# inode <2147483649> trusted.ea16 (255)
local inode_num=$(do_facet $SINGLEMDS \
"$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev" |
- awk '/ea16/ { print $2 }' |
+ awk '/ea17/ { print $2 }' |
sed -e 's/>//' -e 's/<//' -e 's/\"//')
echo "inode num: $inode_num"
[ $inode_num -ge 2147483648 ] || error "inode $inode_num too small"
}
run_test 117 "lctl get_param return errors properly"
+test_119() {
+ local had_config
+ local size_mb
+
+ [[ "$MDSCOUNT" -ge 2 ]] || skip "Need more at least 2 MDTs"
+
+ had_config=$(do_facet mds1 "$LCTL get_param debug | grep config")
+ do_facet mds1 "$LCTL set_param debug=+config"
+ do_facet mds1 "$LCTL clear"
+
+ setup
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ # mount after writeconf will make "add osp" added to mdt0 config:
+ # 53 (224)marker 60 (flags=0x01, v2.5.1.0) lustre-MDT0001 'add osp'
+ # 54 (080)add_uuid nid=... 0: 1:...
+ # 55 (144)attach 0:lustre-MDT0001-osp-MDT0000 1:osp 2:...
+ # 56 (144)setup 0:lustre-MDT0001-osp-MDT0000 1:... 2:...
+ # 57 (136)modify_mdc_tgts add 0:lustre-MDT0000-mdtlov 1:... 2:1 3:1
+ # duplicate modify_mdc_tgts caused crashes
+
+ debug_size_save
+ # using larger debug_mb size to avoid lctl dk log truncation
+ size_mb=$((DEBUG_SIZE_SAVED * 4))
+ for i in {1..3}; do
+ stop_mdt 2
+ # though config processing stops after failed attach and setup
+ # it will proceed after the failed command after each writeconf
+ # this is the original scenario of the issue
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ do_facet mds1 "$LCTL set_param debug_mb=$size_mb"
+ start_mdt 2
+
+ wait_update_facet_cond mds1 \
+ "$LCTL dk | grep -c Processed.log.$FSNAME-MDT0000" \
+ ">" 1 300
+ done
+ debug_size_restore
+
+ [[ -z "$had_config" ]] && do_facet mds1 lctl set_param debug=-config
+
+ reformat
+}
+run_test 119 "writeconf on slave mdt shouldn't duplicate mdc/osp and crash"
+
test_120() { # LU-11130
[ "$MDSCOUNT" -lt 2 ] && skip "mdt count < 2"
[ "$mds1_FSTYPE" != ldiskfs ] &&
}
run_test 120 "cross-target rename should not create bad symlinks"
-test_122() {
+test_121(){
+ stopall
+ start_mgsmds || error "MGS MDS Start failed"
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+ #failback
+ start_mds
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+}
+run_test 121 "failover MGS"
+
+test_122a() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
skip "Need OST version at least 2.11.53"
cleanup
}
-run_test 122 "Check OST sequence update"
+run_test 122a "Check OST sequence update"
+
+test_122b() {
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
+ local err
+
+ reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ stack_trap cleanup EXIT
+ setup_noconfig
+ do_facet ost1 $LCTL set_param obdfilter.*.precreate_batch=256
+ $LFS mkdir -i0 -c1 $DIR/$tdir || error "failed to create directory"
+ $LFS setstripe -i0 -c1 $DIR/$tdir || error "failed to setstripe"
+ do_facet ost1 $LCTL set_param fail_loc=0
+ # overflow IDIF 32bit and create > OST_MAX_PRECREATE*5
+ # so a new wrong sequence would differ from an original with error
+ #define OST_MAX_PRECREATE 20000
+ local ost_max_precreate=20100
+ local num_create=$(( ost_max_precreate * 5 ))
+
+ # Check the number of inodes available on OST0
+ local files=0
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
+
+ if [ $ifree -lt 10000 ]; then
+ files=$(( ifree - 50 ))
+ else
+ files=10000
+ fi
+
+ local j=$((num_create / files + 1))
+
+ for i in $(seq 1 $j); do
+ createmany -o $DIR/$tdir/$tfile-$i- $files ||
+ error "createmany fail create $files files: $?"
+ unlinkmany $DIR/$tdir/$tfile-$i- $files ||
+ error "unlinkmany failed unlink $files files"
+ done
+ sync
+ touch $DIR/$tdir/$tfile
+ do_facet ost1 sync
+ #we need a write req during recovery for ofd_seq_load
+ replay_barrier ost1
+ dd if=/dev/urandom of=$DIR/$tdir/$tfile bs=1024k count=1 oflag=sync ||
+ error "failed to write file"
+
+ # OBD_FAIL_OST_CREATE_NET 0x204
+ do_facet ost1 $LCTL set_param fail_loc=0x80000204
+ fail ost1
+ createmany -o $DIR/$tdir/file_ 100
+ sync
+
+ err=$(do_facet ost1 dmesg | tac | sed "/Recovery over/,$ d" |
+ grep "OST replaced or reformatted")
+ [ -z "$err" ] || error $err
+}
+run_test 122b "Check OST sequence wouldn't change when IDIF 32bit overflows"
test_123aa() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
run_test 123ad "llog_print shows all records"
test_123ae() { # LU-11566
+ local max
+ local mgs_arg=""
+ local log
+ local id
+ local orig
+ local new
+ local rpcs
+
remote_mgs_nodsh && skip "remote MGS with nodsh"
[ -d $MOUNT/.lustre ] || setupall
- local max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
- local mgs_arg=""
-
+ max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ pgs=$($LCTL get_param -n osc.*-OST0000-*.max_pages_per_rpc | head -1)
[[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
mgs_arg="--device MGS"
if do_facet mgs "$LCTL help llog_cancel" 2>&1| grep -q -- --log_id; then
# save one set_param -P record in case none exist
- do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
- local log=params
- local orig=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL set_param -P osc.*.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL set_param -P -d \
+ osc.*.max_pages_per_rpc"
+
+ log=params
+ orig=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
do_facet mgs $LCTL $mgs_arg llog_print $log | tail -1 |
grep "parameter: osc.*.max_dirty_mb" ||
# - { index: 71, event: set_param, device: general,
# param: osc.*.max_dirty_mb, value: 256 }
- local id=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
-
+ id=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL $mgs_arg llog_cancel $log --log_idx=$id
local new=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
# test old positional parameters for a while still
if [ "$MGS_VERSION" -le $(version_code 3.1.53) ]; then
log=$FSNAME-client
+
+ do_facet mgs $LCTL conf_param \
+ $FSNAME-OST0000.osc.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL conf_param -d \
+ $FSNAME-OST0000.osc.max_pages_per_rpc"
+
orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$max
do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | grep "parameter: osc.max_dirty_mb" ||
error "old conf_param wasn't stored in params log"
-
+ do_facet mgs $LCTL --device MGS llog_print $log
# - { index: 71, event: conf_param, device: testfs-OST0000-osc,
# param: osc.max_dirty_mb=256 }
id=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL --device MGS llog_cancel $log $id
+ do_facet mgs $LCTL --device MGS llog_print $log
new=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
(( new == orig )) ||
}
run_test 123af "llog_catlist can show all config files correctly"
+test_123ag() { # LU-15142
+ local rec
+ local orig_val
+
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ (( $MGS_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need server version least 2.14.55"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ orig_val=$(do_facet mgs $LCTL get_param jobid_name)
+ stack_trap "do_facet mgs $LCTL set_param -P jobid_name=$orig_val"
+
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ do_facet mgs $LCTL set_param -P -d jobid_name
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #1"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 1)) || error "parameter is not set"
+ # usage with ordinary set_param format works too
+ do_facet mgs $LCTL set_param -P -d jobid_name="ANY"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #2"
+}
+run_test 123ag "llog_print skips values deleted by set_param -P -d"
+
test_123F() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
echo "Writeconf"
writeconf_all
echo "Remounting"
- mountmgs
- mountmds
- mountoss
- mountcli
+ setup_noconfig
# Reapply the config from before
echo "Setting configuration parameters"
}
run_test 128 "Force using remote logs with --nolocallogs"
+test_129()
+{
+ stopall
+ start_mds || error "MDS start failed"
+ format_ost 1
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "start ost1 should fail" || true
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "second start ost1 should fail" || true
+ do_facet ost1 "$TUNEFS --writeconf $(ostdevname 1)"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS ||
+ error "start ost1 failed"
+ stop ost1
+ stop_mds
+}
+run_test 129 "attempt to connect an OST with the same index should fail"
+
+test_130()
+{
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ setupall
+ stop_mdt 2 || error "mdt2 stop failed"
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)"
+ start_mdt 2 || error "mdt2 start failed"
+ do_facet mds2 "$LCTL dl" | grep MDT0001-osp-MDT0001 &&
+ error "Illegal OSP device created" || true
+}
+run_test 130 "re-register an MDT after writeconf"
+
+test_131() {
+ [ "$mds1_FSTYPE" == "ldiskfs" ] || skip "ldiskfs only test"
+ do_facet mds1 $DEBUGFS -R features $(mdsdevname 1) |
+ grep -q project || skip "skip project quota not supported"
+
+ local projid
+
+ setupall
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir
+ $LFS project -p 1000 $DIR/$tdir || error "set dir project id failed"
+ createmany -o $DIR/$tdir/f 512
+ for ((i = 0; i < 512; ++i)); do
+ $LFS project -p $i $DIR/$tdir/f${i} ||
+ error "set f${i} project id failed"
+ done
+
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir.inherit
+ $LFS project -p 1001 -s $DIR/$tdir.inherit
+ createmany -o $DIR/$tdir.inherit/f 128
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "files did not inherit projid 1001"
+
+ stopall
+
+ for i in $(seq $MDSCOUNT); do
+ mds_backup_restore mds$i ||
+ error "Backup/restore on mds$i failed"
+ done
+
+ setupall
+
+ projid=($($LFS project -d $DIR/$tdir))
+ [ ${projid[0]} == "1000" ] ||
+ error "projid expected 1000 not ${projid[0]}"
+ for ((i = 0; i < 512; ++i)); do
+ projid=($($LFS project $DIR/$tdir/f${i}))
+ [ ${projid[0]} == "$i" ] ||
+ error "projid expected $i not ${projid[0]}"
+ done
+
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "restore did not copy projid 1001"
+}
+run_test 131 "MDT backup restore with project ID"
+
+test_132() {
+ local err_cnt
+ local err_cnt2
+
+ reformat
+ combined_mgs_mds || start_mgs || error "unable to start MGS"
+ start_mdt 1 || error "unable to start mdt1"
+
+ err_cnt=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ stop_mdt 1 || error "stop mdt1 failed"
+
+ [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ do_facet mds1 $TUNEFS --param mdt.hsm_control=enabled $(mdsdevname 1) ||
+ error "tunefs failed"
+ start_mdt 1 || error "cannot start mdt1"
+
+ err_cnt2=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ [ $err_cnt -eq $err_cnt2 ] || error "Can not take the layout lock"
+ stop_mdt 1 || error "stop mdt1 failed"
+}
+run_test 132 "hsm_actions processed after failover"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff