ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
# bug number for skipped test: LU-11915
-ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110 115"
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 110"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
if $SHARED_KEY; then
# bug number for skipped tests: LU-9795 (all below)
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 0 31 32a 32d 35a"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 53a 53b 54b 76a 76b"
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 76c 76d 78 103"
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 84 86 103"
fi
if ! combined_mgs_mds; then
# and stop to generate the startup logs.
start_mds
start_ost
- wait_osc_import_state mds ost FULL
+ wait_osc_import_state mds ost FULL
stop_ost
stop_mds
}
}
reformat() {
- formatall
+ formatall
}
start_mgs () {
for num in $(seq $MDSCOUNT); do
start_mdt $num $@ || return 94
done
+ for num in $(seq $MDSCOUNT); do
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds${num} FULL
+ done
}
start_mgsmds() {
}
stop_mgs() {
- echo "stop mgs service on `facet_active_host mgs`"
- # These tests all use non-failover stop
- stop mgs -f || return 97
+ echo "stop mgs service on `facet_active_host mgs`"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
}
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
start ost1 $(ostdevname 1) $OST_MOUNT_OPTS $@ || return 95
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost1 FULL
}
stop_ost() {
start_ost2() {
echo "start ost2 service on `facet_active_host ost2`"
start ost2 $(ostdevname 2) $OST_MOUNT_OPTS $@ || return 92
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} ost2 FULL
}
stop_ost2() {
do_facet client "cp /etc/passwd $DIR/a" || return 71
do_facet client "rm $DIR/a" || return 72
# make sure lustre is actually mounted (touch will block,
- # but grep won't, so do it after)
- do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
+ # but grep won't, so do it after)
+ do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
echo "setup single mount lustre success"
}
run_test 5h "start mdt failure at mdt_fs_setup()"
test_5i() {
+ (( $MDS1_VERSION >= $(version_code 2.12.54) )) ||
+ skip "Need MDS version at least 2.12.54"
+
setup
stop mds1
}
run_test 9 "test ptldebug and subsystem for mkfs"
+test_10a() {
+ setup
+
+ if ! combined_mgs_mds; then
+ files=$(do_facet mgs "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MGS $files is a broken symlink"
+ fi
+
+ files=$(do_facet mds1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "MDS $files is a broken symlink"
+
+ files=$(do_facet ost1 "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "OSS $files is a broken symlink"
+
+ files=$(do_facet client "find /{proc/fs,sys/fs,sys/kernel/debug}/lustre -type l -exec test ! -e {} \; -print")
+ [ -z $files ] || echo "clients $files is a broken symlink"
+
+ cleanup || error "cleanup failed with rc $?"
+}
+run_test 10a "find lctl param broken symlinks"
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
T32_QID=60000
T32_BLIMIT=40960 # Kbytes
T32_ILIMIT=4
-T32_PRJID=1000
-T32_PROLIMIT=$((T32_BLIMIT/10))
+
#
# This is not really a test but a tool to create new disk
# image tarballs for the upgrade tests.
local remote_dir
local striped_dir
local pushd_dir
- local pfl_dir
- local pfl_file
- local dom_dir
- local dom_file
- local flr_dir
- local flr_file
- local pj_quota_dir
- local pj_quota_file
- local target_dir
if [ $FSNAME != t32fs -o \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o \
- $OSTCOUNT -ne 2 -o -z "$OSTDEV1" ]; then
- error "Needs FSNAME=t32fs MDSCOUNT=2 " \
- "MDSDEV1=<nonexistent_file> " \
- "MDSDEV2=<nonexistent_file> " \
- "(or MDSDEV, in the case of b1_8) " \
- "OSTCOUNT=2 OSTDEV1=<nonexistent_file> " \
- "OSTDEV2=<nonexistent_file>"
+ $OSTCOUNT -ne 1 -o -z "$OSTDEV1" ]; then
+ error "Needs FSNAME=t32fs MDSCOUNT=2 " \
+ "MDSDEV1=<nonexistent_file>" \
+ "MDSDEV2=<nonexistent_file>" \
+ "(or MDSDEV, in the case of b1_8)" \
+ "OSTCOUNT=1 OSTDEV1=<nonexistent_file>"
fi
mkdir $tmp || {
mkdir $tmp/src || return 1
tar cf - -C $src . | tar xf - -C $tmp/src
+ dd if=/dev/zero of=$tmp/src/t32_qf_old bs=1M \
+ count=$(($T32_BLIMIT / 1024 / 4))
+ chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
# format ost with comma-separated NIDs to verify LU-4460
local failnid="$(h2nettype 1.2.3.4),$(h2nettype 4.3.2.1)"
$LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
/mnt/$FSNAME
+ tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
+
if [[ $MDSCOUNT -ge 2 ]]; then
remote_dir=/mnt/$FSNAME/remote_dir
$LFS mkdir -i 1 $remote_dir
tar cf - -C $tmp/src . | tar xf - -C $remote_dir
- target_dir=$remote_dir
- if [[ $MDS1_VERSION -ge $(version_code 2.7.0) ]]; then
+ if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
striped_dir=/mnt/$FSNAME/striped_dir_old
$LFS mkdir -i 1 -c 2 $striped_dir
tar cf - -C $tmp/src . | tar xf - -C $striped_dir
fi
- else
- tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
- target_dir=/mnt/$FSNAME
fi
- # add project quota #
- [[ $mds1_FSTYPE == "ldiskfs" &&
- $MDS1_VERSION -gt $(version_code 2.9.55) ]] ||
- [[ $mds1_FSTYPE == "zfs" &&
- $MDS1_VERSION -gt $(version_code 2.10.53) ]] && {
- pj_quota_dir=$target_dir/project_quota_dir
- pj_quota_file_old=$pj_quota_dir/pj_quota_file_old
-
- enable_project_quota
- set_mdt_qtype ugp ||
- error "enable mdt quota failed"
-
- set_ost_qtype ugp ||
- error "enable ost quota failed"
-
- mkdir -p $pj_quota_dir
- $LFS setquota -p $T32_PRJID -b 0 -B $T32_PROLIMIT -i 0 \
- -I $T32_ILIMIT $pj_quota_dir ||
- error "setquota -p $T32_PRJID failed"
-
- $LFS setstripe $pj_quota_file_old -c 1 ||
- error "setstripe $pj_quota_file_old failed"
-
- chown $T32_QID:$T32_QID $pj_quota_file_old ||
- error "chown $pj_quota_file_old failed"
-
- change_project -p $T32_PRJID $pj_quota_file_old
-
- mkdir -p $tmp/src/project_quota_dir
- cp $pj_quota_file_old $tmp/src/project_quota_dir/
- }
-
- #####################
- tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
-
- #if [[ $MDSCOUNT -ge 2 ]]; then
- # remote_dir=/mnt/$FSNAME/remote_dir
- # $LFS mkdir -i 1 $remote_dir
- # tar cf - -C $tmp/src . | tar xf - -C $remote_dir
-
- # if [[ "$MDS1_VERSION" -ge $(version_code 2.7.0) ]]; then
- # striped_dir=/mnt/$FSNAME/striped_dir_old
- # $LFS mkdir -i 1 -c 2 $striped_dir
- # tar cf - -C $tmp/src . | tar xf - -C $striped_dir
- # fi
- #fi
-
- # PFL file #
- if [[ $MDS1_VERSION -ge $(version_code 2.9.51) ]]; then
- pfl_dir=$target_dir/pfl_dir
- pfl_file=$pfl_dir/pfl_file
- mkdir -p $pfl_dir
- $LFS setstripe -E 2M -c 1 -o 0 -E -1 -S 2M -c 1 -o 1 \
- $pfl_file ||
- error "Create PFL file failed"
-
- dd if=/dev/urandom of=$pfl_file bs=1k count=3k
- mkdir -p $tmp/src/pfl_dir
- cp $pfl_file $tmp/src/pfl_dir/
- fi
-
- ############
- # DoM / FLR file #
- if [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]]; then
- dom_dir=$target_dir/dom_dir
- dom_file=$dom_dir/dom_file
- flr_dir=$target_dir/flr_dir
- flr_file=$flr_dir/flr_file
-
- mkdir -p $dom_dir
- $LFS setstripe -E 1M -L mdt -E -1 -S 4M $dom_file
- dd if=/dev/urandom of=$dom_file bs=1k count=2k
- mkdir -p $tmp/src/dom_dir
- cp $dom_file $tmp/src/dom_dir
- # FLR #
- mkdir -p $flr_dir
- LFS mirror create -N2 $flr_file
- dd if=/dev/urandom of=$flr_file bs=1k count=1
- mkdir -p $tmp/src/flr_dir
- cp $flr_file $tmp/src/flr_dir
- fi
- ############
stopall
mkdir $tmp/img || return 1
kill -s USR1 $pid
wait $pid
- #################
stopall
pushd $tmp/src
devname=$(mdsvdevname $num)
mv $devname $tmp/img
done
-
- for num in $(seq $OSTCOUNT); do
- local devname=$(ostdevname $num)
- local facet=oss$num
- [[ $(facet_fstype $facet) != zfs ]] ||
- devname=$(ostdevname $num)
- mv $devname $tmp/img
- done
+ mv $OSTDEV1 $tmp/img
version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
sed -e 's/\./_/g') # E.g., "1.8.7" -> "1_8"
if $shall_cleanup_ost; then
$r $UMOUNT $tmp/mnt/ost || rc=$?
fi
- if $shall_cleanup_ost1; then
- $r $UMOUNT $tmp/mnt/ost1 || rc=$?
- fi
$r rm -rf $tmp
rm -rf $tmp
return 0
}
-getquota() {
- local spec=$4
- local uuid=$3
- local mnt=$5
-
- sync_all_data > /dev/null 2>&1 || true
-
- [ "$uuid" != "global" ] || uuid=$mnt
-
- $LFS quota -v "$1" "$2" $mnt |
- awk 'BEGIN { num='$spec' } { if ($1 == "'$uuid'") \
- { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
- | tr -d "*"
-}
-
t32_test() {
local tarball=$1
local writeconf=$2
local dne_upgrade=${dne_upgrade:-"no"}
local dom_upgrade=${dom_upgrade:-"no"}
+ local project_upgrade=${project_upgrade:-"no"}
local ff_convert=${ff_convert:-"no"}
- local pfl_upgrade=${pfl_upgrade:-"no"}
- local project_quota_upgrade=${project_quota_upgrade:-"no"}
- local dom_new_upgrade=${dom_new_upgrade:-"no"}
- local flr_upgrade=${flr_upgrade:-"no"}
local shall_cleanup_mdt=false
local shall_cleanup_mdt1=false
local shall_cleanup_ost=false
- local shall_cleanup_ost1=false
local shall_cleanup_lustre=false
local mdt2_is_available=false
- local ost2_is_available=false
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
local tmp=$TMP/t32
local mdt_dev=$tmp/mdt
local mdt2_dev=$tmp/mdt2
local ost_dev=$tmp/ost
- local ost2_dev=$tmp/ost2
local stripe_index
local stripe_count
local dir
- local pfl_file=$tmp/mnt/lustre/remote_dir/pfl_dir/pfl_file
- local flr_file=$tmp/mnt/lustre/remote_dir/flr_dir/flr_file
- local dom_file=$tmp/mnt/lustre/remote_dir/dom_dir/dom_file
- local quota_dir=$tmp/mnt/lustre/remote_dir/project_quota_dir
combined_mgs_mds || stop_mgs || error "Unable to stop MGS"
trap 'trap - RETURN; t32_test_cleanup' RETURN
nid=$($r $LCTL list_nids | head -1)
mkdir -p $tmp/mnt/lustre || error "mkdir $tmp/mnt/lustre failed"
- $r mkdir -p $tmp/mnt/{mdt,mdt1,ost,ost1}
+ $r mkdir -p $tmp/mnt/{mdt,mdt1,ost}
$r tar xjvf $tarball -S -C $tmp || {
error_noexit "Unpacking the disk image tarball"
return 1
ff_convert="no"
! $r test -f $mdt2_dev || mdt2_is_available=true
- ! $r test -f $ost2_dev || ost2_is_available=true
if [[ "$mds1_FSTYPE" == zfs ]]; then
# import pool first
mdt_dev=t32fs-mdt1/mdt1
ost_dev=t32fs-ost1/ost1
! $mdt2_is_available || mdt2_dev=t32fs-mdt2/mdt2
- ! $ost2_is_available || ost2_dev=t32fs-ost2/ost2
wait_update_facet $SINGLEMDS "$ZPOOL list |
awk '/^t32fs-mdt1/ { print \\\$1 }'" "t32fs-mdt1" || {
error_noexit "import zfs pool failed"
return 1
}
+ elif [ "$project_upgrade" != "no" ]; then
+ ! $r tune2fs -O project $mdt_dev &&
+ error_noexit "enable project on mdt0 failed" &&
+ return 1
+ $mdt2_is_available && ! $r tune2fs "-O project" $mdt2_dev &&
+ error_noexit "enable project on mdt failed" &&
+ return 1
+ ! $r tune2fs -O project $ost_dev &&
+ error_noexit "enable project on mdt failed" &&
+ return 1
fi
$r $LCTL set_param debug="$PTLDEBUG"
error_noexit "Enable mdt quota feature"
return 1
}
-
- if [ "$project_quota_upgrade" != "no" ]; then
- $r $TUNE2FS -O project $mdt_dev || {
- $r losetup -a
- error_noexit "tune2fs $mdt_dev failed"
- return 1
- }
- echo "enable project quota on $mdt_dev"
- fi
-
if $mdt2_is_available; then
$r $TUNEFS --quota $mdt2_dev || {
$r losetup -a
error_noexit "Enable mdt quota feature"
return 1
}
- if [ "$project_quota_upgrade" != "no" ]; then
- $r $TUNE2FS -O project $mdt2_dev || {
- $r losetup -a
- error_noexit \
- "tune2fs $mdt2_dev failed"
- return 1
- }
- echo "enable project quota on $mdt2_dev"
- fi
fi
fi
else
error_noexit "Mounting the MDT"
return 1
}
- shall_cleanup_mdt1=true
- echo "mount new MDT....$mdt2_dev"
- $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 || {
+ echo "mount new MDT....$mdt2_dev"
+ $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
error_noexit "enable remote dir create failed"
- return 1
- }
+ shall_cleanup_mdt1=true
elif [ "$dne_upgrade" != "no" ]; then
local fs2mdsdev=$(mdsdevname 1_2)
local fs2mdsvdev=$(mdsvdevname 1_2)
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
- add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
- $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
+ add $SINGLEMDS $(mds2failover_HOST="" \
+ mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
error_noexit "Mkfs new MDT failed"
return 1
}
error_noexit "tunefs.lustre before mounting the OST"
return 1
}
-
- if $ost2_is_available; then
- $r $TUNEFS --dryrun $ost2_dev || {
- error_noexit "tunefs.lustre before mounting the OST"
- return 1
- }
- fi
-
if [ "$writeconf" ]; then
mopts=mgsnode=$nid,$writeconf
- if [ "$ost1_FSTYPE" == ldiskfs ]; then
+ if [ "$mds1_FSTYPE" == ldiskfs ]; then
mopts="loop,$mopts"
$r $TUNEFS --quota $ost_dev || {
$r losetup -a
error_noexit "Enable ost quota feature"
return 1
}
-
- if [ "$project_quota_upgrade" != "no" ]; then
- $r $TUNE2FS -O project $ost_dev || {
- $r losetup -a
- error_noexit "tune2fs $ost_dev failed"
- return 1
- }
- echo "enable project quota on $ost_dev"
- fi
-
- if $ost2_is_available; then
- $r $TUNEFS --quota $ost2_dev || {
- $r losetup -a
- error_noexit "Enable ost2 quota feature"
- return 1
- }
- if [ "$project_quota_upgrade" != "no" ]; then
- $r $TUNE2FS -O project $ost2_dev || {
- $r losetup -a
- error_noexit \
- "tune2fs $ost2_dev failed"
- return 1
- }
- echo "enable project quota on $ost2_dev"
- fi
- fi
fi
else
mopts=mgsnode=$nid
error_noexit "Mounting the OST"
return 1
}
-
- if $ost2_is_available; then
- $r $MOUNT_CMD -onomgs -o$mopts $ost2_dev $tmp/mnt/ost1 || {
- error_noexit "Mounting the OST2"
- return 1
- }
- shall_cleanup_ost1=true
- fi
-
shall_cleanup_ost=true
uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0000.uuid) || {
return 1
fi
- if $ost2_is_available; then
- uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0001.uuid) ||{
- error_noexit "Getting OST1 UUID"
- return 1
- }
- if [ "$uuid" != $fsname-OST0001_UUID ]; then
- error_noexit "Unexpected OST1 UUID: \"$uuid\""
- return 1
- fi
- fi
-
if [[ $PERM_CMD == *"set_param -P"* ]]; then
$r $PERM_CMD osc.$fsname-OST0000*.import=connection=$nid || {
error_noexit "Setting OST \"failover.node\""
shall_cleanup_lustre=true
$r $LCTL set_param debug="$PTLDEBUG"
- # Leave re-enabling this to a separate patch for LU-11558
- # t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
- # error_noexit "verify quota failed"
- # return 1
- #}
+ t32_verify_quota $SINGLEMDS $fsname $tmp/mnt/lustre || {
+ error_noexit "verify quota failed"
+ return 1
+ }
if $r test -f $tmp/list; then
#
echo "list verification skipped"
fi
- #non-dom upgrade to dom
if [ "$dom_upgrade" != "no" ]; then
echo "Check DoM file can be created"
$LFS setstripe -E 1M -L mdt -E EOF $tmp/mnt/lustre/dom || {
}
fi
- #dom upgrade
- #$LFS setstripe -E 1M -L mdt -E -1 -S 4M $dom_file
- if [ "$dom_new_upgrade" != "no" ]; then
- if ! $mdt2_is_available; then
- dom_file=$tmp/mnt/lustre/dom_dir/dom_file
- fi
- echo "Check DoM file can be accessed"
- [ $($LFS getstripe -I1 -L $dom_file) == "mdt" ] || {
- error_noexit "Verify a DoM file"
- return 1
- }
- [ $(stat -c%s $dom_file) == $((2 * 1024 * 1024)) ] || {
- error_noexit "DoM: bad size after write"
- return 1
- }
- fi
-
- if [ "$flr_upgrade" != "no" ]; then
- if ! $mdt2_is_available; then
- flr_file=$tmp/mnt/lustre/flr_dir/flr_file
- fi
- local mirror_count=$($LFS getstripe -N $flr_file)
- echo "Check FLR file"
- [ $mirror_count == 2 ] || {
- error_noexit "FLR mirror count wrong"
- return 1
- }
- fi
-
if [ "$dne_upgrade" != "no" ]; then
$LFS mkdir -i 1 -c2 $tmp/mnt/lustre/striped_dir || {
error_noexit "set striped dir failed"
return 1
}
+
$LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
pushd $tmp/mnt/lustre
popd
fi
- if [ "$pfl_upgrade" != "no" ]; then
- local comp_size
- local comp_cnt
- local stripe_size
- local stripe_cnt
- local comp_id
-
- echo "Check PFL file"
- if ! $mdt2_is_available; then
- pfl_file=$tmp/mnt/lustre/pfl_dir/pfl_file
- fi
- comp_cnt=$($LFS getstripe --component-count $pfl_file)
- [ $comp_cnt == 2 ] || {
- error_noexit "wrong comp_cnt $comp_cnt"
- return 1
- }
-
- comp_size=$($LFS getstripe -I1 -E $pfl_file)
- [ $comp_size == 2097152 ] || {
- error_noexit "wrong component size $comp_size"
- return 1
- }
-
- comp_id=$($LFS getstripe -I1 -i $pfl_file)
- [ $comp_id == 0 ] || {
- error_noexit "wrong comp id $comp_id"
- return 1
- }
-
- comp_id=$($LFS getstripe -I2 -i $pfl_file)
- [ $comp_id -eq 1 ] || {
- error_noexit "wrong comp id $comp_id"
- return 1
- }
-
- stripe_size=$($LFS getstripe -I1 -S $pfl_file)
- [ $stripe_size -eq 1048576 ] || {
- error_noexit "wrong stripe size $stripe_size"
- return 1
- }
-
- stripe_size=$($LFS getstripe -I2 -S $pfl_file)
- [ $comp_size -eq 2097152 ] || {
- error_noexit "wrong component size $comp_size"
- return 1
- }
- fi
-
- if [ "$project_quota_upgrade" != "no" ]; then
- if ! $mdt2_is_available; then
- quota_dir=$tmp/mnt/lustre/project_quota_dir
- fi
- local hardlimit
-
- echo "Check Project Quota"
- hardlimit=$(getquota -p $T32_PRJID global 3 \
- ${tmp}/mnt/lustre)
- [ $hardlimit == $T32_PROLIMIT ] || {
- error_noexit "wrong hardlimit $hardlimit"
- return 1
- }
- fi
-
# If it is upgrade from DNE (2.5), then rename the remote dir,
# which is created in 2.5 to striped dir.
if $mdt2_is_available && [[ "$dne_upgrade" != "no" ]]; then
$r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
if [ "$dne_upgrade" != "no" ]; then
pushd $tmp/mnt/lustre/striped_dir
- elif [ "$pfl_upgrade" != "no" ] ||
- [ "$flr_upgrade" != "no" ] ||
- [ "$dom_new_upgrade" != "no" ] ||
- [ "$project_quota_upgrade" != "no" ]; then
- pushd $tmp/mnt/lustre/remote_dir
else
pushd $tmp/mnt/lustre
fi
echo "sha1sum verification skipped"
fi
- # PFL write test after sha1sum check
- if [ "$pfl_upgrade" != "no" ]; then
- local rw_len=$((3 * 1034 * 1024))
- if ! $mdt2_is_available; then
- pfl_file=$tmp/mnt/lustre/pfl_dir/pfl_file
- fi
- small_write $pfl_file $rw_len || {
- error_noexit "PFL RW Failed"
- return 1
- }
- fi
-
if [ "$dne_upgrade" != "no" ]; then
rm -rf $tmp/mnt/lustre/striped_dir || {
error_noexit "remove remote dir failed"
return 1
}
+ if [ "$mds1_FSTYPE" == ldiskfs -a \
+ "$project_upgrade" != "no" ]; then
+ ! $LFS project -d -p 1 $tmp/mnt/lustre/* &&
+ error_noexit "set project failed" &&
+ return 1
+ fi
+
[[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) == 0 ]] ||
error "MDD orphan cleanup thread not quit"
error_noexit "Unmounting the OST"
return 1
}
- if $ost2_is_available; then
- $r $UMOUNT $tmp/mnt/ost1 || {
- error_noexit "Unmounting the OST1"
- return 1
- }
- shall_cleanup_ost1=false
- fi
-
- if [[ $ost1_FSTYPE == zfs ]]; then
- $r "$ZPOOL export t32fs-ost1"
- if $ost2_is_available; then
- $r "$ZPOOL export t32fs-ost2"
- fi
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ $r "$ZPOOL export t32fs-ost1"
fi
shall_cleanup_ost=false
t32_check
for tarball in $tarballs; do
- banner "testing $tarball upgrade with ff convert"
- ff_convert=yes t32_test $tarball || rc=$?
+ banner "testing $tarball upgrade with ff convert and project upgrade"
+ project_upgrade="no"
+ [[ "$MDS1_VERSION" -ge $(version_code 2.13.54) ]] &&
+ [[ "$tarball" =~ "disk2_4-ldiskfs" ]] &&
+ project_upgrade="yes"
+ project_upgrade=$project_upgrade ff_convert=yes t32_test \
+ $tarball || rc=$?
done
return $rc
}
-run_test 32d "convert ff test"
+run_test 32d "convert ff and project quota upgrade test"
test_32e() {
[[ "$MDS1_VERSION" -ge $(version_code 2.10.56) ]] ||
}
run_test 32e "dom upgrade test"
-test_32f() {
- [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
- skip "Need MDS version at least 2.10.56"
-
- local tarballs
- local tarball
- local rc=0
-
- t32_check
- for tarball in $tarballs; do
- echo $tarball | grep "2_10" || continue
- pfl_upgrade=yes project_quota_upgrade=yes \
- t32_test $tarball writeconf || let "rc += $?"
- done
- return $rc
-}
-run_test 32f "pfl upgrade test"
-
-test_32g() {
- [[ $MDS1_VERSION -ge $(version_code 2.10.56) ]] ||
- skip "Need MDS version at least 2.10.56"
-
- local tarballs
- local tarball
- local rc=0
-
- t32_check
- for tarball in $tarballs; do
- echo $tarball | grep "2_12" || continue
- flr_upgrade=yes dom_new_upgrade=yes \
- t32_test $tarball writeconf || let "rc += $?"
- done
- return $rc
-}
-run_test 32g "flr/dom upgrade test"
-
test_33a() { # bug 12333, was test_33
local FSNAME2=test-123
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
- mkdir $DIR/$tdir-rootdir || error "mkdir failed"
+ mkdir_on_mdt0 $DIR/$tdir-rootdir || error "mkdir failed"
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
start_ost2 || error "Unable to start OST2"
mount_client $MOUNT || error "client start failed"
- mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+ mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
if [[ $PERM_CMD == *"set_param -P"* ]]; then
$PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&
skip "ldiskfs module has not been loaded"
fi
+ if grep -q "CONFIG_DEBUG_LOCK_ALLOC=y" /boot/config-$(uname -r); then
+ skip "test is not compatible with CONFIG_DEBUG_LOCK_ALLOC=y"
+ fi
+
echo "$inode_slab ldiskfs inodes per page"
[ "${inode_slab%.*}" -ge "3" ] && return 0
if [ $num_create -gt 0 ]; then
# Check the number of inodes available on OST0
local files=0
- local ifree=$($LFS df -i $MOUNT | awk '/OST0000/ { print $4 }')
- log "On OST0, $ifree inodes available. Want $num_create."
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
$LFS setstripe -i 0 $DIR/$tdir ||
error "$LFS setstripe -i 0 $DIR/$tdir failed"
local idx=$($LFS getstripe -i $DIR/$tdir/$tfile-last)
[ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
- local iused=$($LFS df -i $MOUNT | awk '/OST0000/ { print $3 }')
- log "On OST0, $iused used inodes"
+ local iused=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $3 }'; exit ${PIPESTATUS[0]})
+ log "On OST0, $iused used inodes rc=$?"
[ $iused -ge $((ost_max_pre/2 + 1000)) ] &&
error "OST replacement created too many inodes; $iused"
cleanup || error "cleanup failed with $?"
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
stack_trap "do_nodes $(comma_list $(mdts_nodes)) \
mount_client $MOUNT || error "mount client $MOUNT failed"
wait_osts_up
- $LFS df $MOUNT || error "$LFS df $MOUNT failed"
+ $LFS df $MOUNT
+ check_lfs_df_ret_val $? || error "$LFS df $MOUNT failed"
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
# Create a new pool and add OSTs into it.
[[ "$MDS1_VERSION" -ge $(version_code 2.7.56) ]] ||
skip "Need server version newer than 2.7.55"
- local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
- --reformat $(ostdevname 1) $(ostvdevname 1)"
-
local NEWSIZE=1024
local OLDSIZE=$(do_facet ost1 "$DEBUGFS -c -R stats $(ostdevname 1)" |
awk '/Flex block group size: / { print $NF; exit; }')
- local opts=OST_OPTS
- if [[ ${!opts} != *mkfsoptions* ]]; then
- eval opts=\"${!opts} \
- --mkfsoptions='\\\"-O flex_bg -G $NEWSIZE\\\"'\"
- else
- val=${!opts//--mkfsoptions=\\\"/ \
- --mkfsoptions=\\\"-O flex_bg -G $NEWSIZE }
- eval opts='${val}'
- fi
+ [ "$OLDSIZE" == "$NEWSIZE" ] && skip "$NEWSIZE groups already"
+ local opts=" -O flex_bg -G $NEWSIZE"
+ opts=$(OST_FS_MKFS_OPTS+="$opts" mkfs_opts ost1 $(ostdevname 1))
+ opts+=" --reformat $(ostdevname 1) $(ostvdevname 1)"
echo "params: $opts"
trap cleanup_86 EXIT ERR
stopall
- [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ if [[ "$mds1_FSTYPE" == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
# Check that parameters are added correctly
echo "tunefs --param $key=$val1"
- do_facet mds "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val1 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that parameters replace existing instances when added
echo "tunefs --param $key=$val2"
- do_facet mds "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --param $key=$val2 $mdsdev >/dev/null" ||
error "tunefs --param $key=$val2 failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
# Check that a parameter is erased properly
echo "tunefs --erase-param $key"
- do_facet mds "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-param $key $mdsdev >/dev/null" ||
error "tunefs --erase-param $key failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
error "on-disk parameter not erased correctly via tunefs"
# Check that all the parameters are erased
+ do_facet mds1 "$TUNEFS --param $key=$val1 $mdsdev >/dev/null" ||
+ error "tunefs --param $key=$val1 failed"
echo "tunefs --erase-params"
- do_facet mds "$TUNEFS --erase-params $mdsdev >/dev/null" ||
+ do_facet mds1 "$TUNEFS --erase-params $mdsdev >/dev/null" ||
error "tunefs --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
- [ -z $params ] ||
- error "all on-disk parameters not erased correctly via tunefs"
+ params=$(echo $params | tr ' ' '\n')
+ [ -z "$params" ] ||
+ error "all on-disk parameters not erased correctly via tunefs $params"
# Check the order of options --erase-params and --param
echo "tunefs --param $key=$val1 --erase-params"
- do_facet mds \
+ do_facet mds1 \
"$TUNEFS --param $key=$val1 --erase-params $mdsdev >/dev/null"||
error "tunefs --param $key=$val1 --erase-params failed"
- params=$(do_facet mds $TUNEFS --dryrun $mdsdev) ||
+ params=$(do_facet mds1 $TUNEFS --dryrun $mdsdev) ||
error "tunefs --dryrun failed"
params=${params##*Parameters:}
params=${params%%exiting*}
}
run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
+save_params_90c() {
+ # get max_rpcs_in_flight value
+ mrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ echo "max_rpcs_in_flight is $mrif_90c"
+
+ # get max_mod_rpcs_in_flight value
+ mmrif_90c=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight)
+ echo "max_mod_rpcs_in_flight is $mmrif_90c"
+
+ # get MDT max_mod_rpcs_per_client value
+ mmrpc_90c=$(do_facet mds1 \
+ cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+ echo "max_mod_rpcs_per_client is $mmrpc_90c"
+}
+
+restore_params_90c() {
+ trap 0
+
+ # restore max_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ # restore max_mod_rpcs_in_flight value
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mmrif_90c
+
+ # restore MDT max_mod_rpcs_per_client value
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+}
+
test_90c() {
local tmp
- local mrif
- local mmrpc
setup
skip "Client not able to send multiple modify RPCs in parallel"
fi
- # get max_rpcs_in_flight value
- mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
- echo "max_rpcs_in_flight is $mrif"
-
- # get MDT max_mod_rpcs_per_client
- mmrpc=$(do_facet mds1 \
- cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
- echo "max_mod_rpcs_per_client is $mmrpc"
+ save_params_90c
+ stack_trap restore_params_90c
# testcase 1
# attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
# prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
- umount_client $MOUNT
- do_facet mds1 \
- "echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- mount_client $MOUNT
+ do_facet mds1 "echo $mrif_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
- $LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
- error "set max_mod_rpcs_in_flight to $mrif should fail"
+ # if max_mod_rpcs_in_flight is set to be equal to or larger than
+ # max_rpcs_in_flight, then max_rpcs_in_flight will be increased
+ if [[ "$CLIENT_VERSION" -ge $(version_code 2.13.53) ]]; then
+ $LCTL set_param \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c ||
+ error "set max_mod_rpcs_in_flight to $mrif_90c failed"
+
+ local new_mrif=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+ ((new_mrif == mrif_90c + 1)) ||
+ error "max_rpcs_in_flight was not increased"
+ fi
umount_client $MOUNT
- do_facet mds1 \
- "echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+ do_facet mds1 "echo $mmrpc_90c > \
+ /sys/module/mdt/parameters/max_mod_rpcs_per_client"
mount_client $MOUNT
# testcase 2
# attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
# prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc_90c + 2))
$LCTL set_param \
- mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
- error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc_90c + 1)) &&
+ error "set max_mod_rpcs_in_flight to $((mmrpc_90c + 1)) should fail"
+
+ # testcase 3
+ # attempt to set max_mod_rpcs_in_flight permanently
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+ do_facet mgs $LCTL set_param -P \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c
+
+ remount_client $MOUNT
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" \
+ "$((mrif_90c + 1))" ||
+ error "expected '$((mrif_90c + 1))' for max_rpcs_in_flight"
+
+ wait_update_facet --verbose client "$LCTL get_param -n \
+ mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight" \
+ "$mrif_90c" ||
+ error "expected '$mrif_90c' for max_mod_rpcs_in_flight"
+
+ restore_params_90c
cleanup
}
run_test 90c "check max_mod_rpcs_in_flight update limits"
check_uuid_on_mdt() {
local nid=$1
- do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.'$nid'.uuid"
+ do_facet $SINGLEMDS "$LCTL get_param mdt.${mds1_svc}*.exports.'$nid'.uuid"
}
test_91() {
echo "evict $nid"
do_facet $SINGLEMDS \
"$LCTL set_param -n mdt.${mds1_svc}.evict_client nid:$nid"
+ sleep 1 # eviction above is async, give it some time to proceed
found=$(check_uuid_on_mdt $nid | grep $uuid)
[ -n "$found" ] && error "found $uuid $nid on MDT"
local ldevconfpath=$1
local fstype=
local fsldevformat=""
- touch $ldevconfpath
+ rm -f $ldevconfpath
- fstype=$(facet_fstype mgs)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
+ local facets="mgs,$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
fsldevformat=""
- fi
-
- printf "%s\t-\t%s-MGS0000\t%s%s\n" \
- $mgs_HOST \
- $FSNAME \
- $fsldevformat \
- $(mgsdevname) > $ldevconfpath
-
- local mdsfo_host=$mdsfailover_HOST;
- if [ -z "$mdsfo_host" ]; then
- mdsfo_host="-"
- fi
-
- for num in $(seq $MDSCOUNT); do
- fstype=$(facet_fstype mds$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
- fi
-
- printf "%s\t%s\t%s-MDT%04d\t%s%s\n" \
- $mds_HOST \
- $mdsfo_host \
- $FSNAME \
- $num \
- $fsldevformat \
- $(mdsdevname $num) >> $ldevconfpath
- done
-
- local ostfo_host=$ostfailover_HOST;
- if [ -z "$ostfo_host" ]; then
- ostfo_host="-"
- fi
-
- for num in $(seq $OSTCOUNT); do
- fstype=$(facet_fstype ost$num)
- if [ "$fstype" == zfs ]; then
- fsldevformat="$fstype:"
- else
- fsldevformat=""
+ fstype=$(facet_fstype $facet)
+ [ "$fstype" = zfs ] && fsldevformat="$fstype:"
+ local host=$(facet_host $facet)
+ local fo="-"
+ local varfo=${facet}failover_HOST
+ if [ $facet == mgs ] && combined_mgs_mds; then
+ varfo=mds1failover_HOST
fi
-
- printf "%s\t%s\t%s-OST%04d\t%s%s\n" \
- $ost_HOST \
- $ostfo_host \
+ [ -n "${!varfo}" ] && fo=${!varfo}
+ local type=$(echo $facet | tr -d "[:digit:]" | \
+ tr "[:lower:]" "[:upper:]" | sed s/MDS/MDT/ )
+ local num=1
+ [ ${facet} == mgs ] ||
+ num=$(facet_number $facet)
+ printf "%s\t%s\t%s-%s%04x\t%s%s\n" \
+ ${host} \
+ ${fo} \
$FSNAME \
- $num \
+ $type \
+ $(( num - 1 )) \
$fsldevformat \
- $(ostdevname $num) >> $ldevconfpath
+ $(facet_device $facet) >> $ldevconfpath
done
echo "----- $ldevconfpath -----"
}
compare_ldev_output() {
- ldev_output=$1
- expected_output=$2
+ local ldev_output=$1
+ local expected_output=$2
sort $expected_output -o $expected_output
sort $ldev_output -o $ldev_output
generate_nids $NIDSPATH
# echo the mgs nid and compare it to environment variable MGSNID
- # also, ldev.conf and nids is a server side thing, use the OSS
- # hostname
- local output
- output=$($LDEV -c $LDEVCONFPATH -H $ost_HOST -n $NIDSPATH echo %m)
-
- echo "-- START OF LDEV OUTPUT --"
- echo -e "$output"
- echo "--- END OF LDEV OUTPUT ---"
-
- # ldev failed, error
- if [ $? -ne 0 ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed to execute!"
- fi
-
- # need to process multiple lines because of combined MGS and MDS
- echo -e $output | awk '{ print $2 }' | while read -r line ; do
- if [ "$line" != "$MGSNID" ]; then
- rm $LDEVCONFPATH $NIDSPATH
- error "ldev failed mgs nid '$line', expected '$MGSNID'"
- fi
+ local facets="$(get_facets OST),$(get_facets MDS),mgs"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ local output=$($LDEV -c $LDEVCONFPATH -H $host -n $NIDSPATH echo %m)
+
+ echo "-- START OF LDEV OUTPUT --"
+ echo -e "$output"
+ echo "--- END OF LDEV OUTPUT ---"
+
+ [ -z "$output" ] &&
+ error "ldev failed to execute!"
+
+ # need to process multiple lines because of
+ # several targets on host
+ echo -e $output | awk '{ print $2 }' | while read -r line ; do
+ [ "$line" = "$MGSNID" ] ||
+ error "ldev failed mgs nid '$line', \
+ expected '$MGSNID'"
+ done
done
-
- rm $LDEVCONFPATH $NIDSPATH
+ rm -f $LDEVCONFPATH $NIDSPATH
}
run_test 92 "ldev returns MGS NID correctly in command substitution"
printf "%s-MGS0000\n" $FSNAME > $EXPECTED_OUTPUT
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
echo "$mgs_HOST-$(facet_fstype mgs)" > $EXPECTED_OUTPUT
- if [ "$mgs_HOST" == "$mds_HOST" ]; then
- for num in $(seq $MDSCOUNT); do
- echo "$mds_HOST-$(facet_fstype mds$num)" \
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ for facet in ${facets//,/ }; do
+ local host=$(facet_host $facet)
+ [ "$mgs_HOST" == "$host" ] &&
+ echo "$host-$(facet_fstype $facet)" \
>> $EXPECTED_OUTPUT
- done
- fi
-
- if [ "$mgs_HOST" == "$ost_HOST" ]; then
- for num in $(seq $OSTCOUNT); do
- echo "$ost_HOST-$(facet_fstype ost$num)" \
- >> $EXPECTED_OUTPUT
- done
- fi
+ done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
fi
for num in $(seq $MDSCOUNT); do
- printf "%s-MDT%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-MDT%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
rm $EXPECTED_OUTPUT
for num in $(seq $OSTCOUNT); do
- printf "%s-OST%04d\n" $FSNAME $num >> $EXPECTED_OUTPUT
+ printf "%s-OST%04x\n" $FSNAME $((num - 1)) >> $EXPECTED_OUTPUT
done
compare_ldev_output $LDEV_OUTPUT $EXPECTED_OUTPUT
}
run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
-test_101() {
+test_101a() {
local createmany_pid
local dev=$FSNAME-OST0000-osc-MDT0000
setup
unlinkmany $DIR1/$tdir/$tfile-%d 50000
cleanup
}
-run_test 101 "Race MDT->OST reconnection with create"
+run_test 101a "Race MDT->OST reconnection with create"
+
+test_101b () {
+ local dev=$FSNAME-OST0000-osc-MDT0000
+ local dir=$DIR1/$tdir
+ setup
+
+ mkdir $dir
+ $LFS setstripe -c 1 -i 0 $dir
+ do_facet $SINGLEMDS "$LCTL --device $dev deactivate;"
+#define OBD_FAIL_OSP_CON_EVENT_DELAY 0x2107
+ do_facet mds1 "$LCTL set_param fail_loc=0x80002107 fail_val=20"
+ do_facet $SINGLEMDS "$LCTL --device $dev activate;"
+ stop_ost
+ sleep 25
+ start_ost
+
+ wait_osc_import_state client ost1 FULL
+ touch $dir/$tfile || error "Can't create file"
+
+ cleanup
+}
+run_test 101b "Race events DISCONNECT and ACTIVE in osp"
test_102() {
[[ "$MDS1_VERSION" -gt $(version_code 2.9.53) ]] ||
}
run_test 108b "migrate from ZFS to ldiskfs"
-
#
# set number of permanent parameters
#
(( $val == 1 )) || error "obdfilter.$FSNAME-OST0001*.no_precreate=$val"
mount_client $MOUNT || error "mount client failed"
+ wait_osc_import_state mds1 ost1 FULL
+ wait_osc_import_state client ost1 FULL
wait_osc_import_state client ost2 FULL
$LFS setstripe -i 0 $DIR/$tfile.0 ||
sleep_maxage
$LFS setstripe -i 1 $DIR/$tfile.2 ||
error "failed to create $tfile.2 on ost1 facet"
+ # files not cleaned with ONLY_REPEAT because of client unmount below
+ rm -f $DIR/$tfile.[012]
stop_ost2 || error "stop ost2 facet failed"
cleanup
}
echo "$dbfs_ver" | egrep -w "1.44.3.wc1|1.44.5.wc1|1.45.2.wc1" &&
skip_env "This version of debugfs doesn't show inode number"
- is_dm_flakey_dev $SINGLEMDS $(mdsdevname 1) &&
- skip "This test can not be executed on flakey dev"
-
IMAGESIZE=$((3072 << 30)) # 3072 GiB
stopall
+ local saved_flakey=${FLAKEY}
+ stack_trap "FLAKEY=$saved_flakey" EXIT
+ FLAKEY=false
+
echo "client1: "
lctl dl
mount | grep lustre
echo "mds1: "
- do_facet mds1 "hostname; ifconfig; lctl dl; mount"
+ do_facet mds1 "hostname; lctl dl; mount"
echo "ost1: "
- do_facet ost1 "hostname; ifconfig; lctl dl; mount"
+ do_facet ost1 "hostname; lctl dl; mount"
# We need MDT size 3072GB, because it is smallest
# partition that can store 2B inodes
do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
mkdir -p $DIR/$tdir || error "mkdir $DIR/$tdir fail"
goal="/sys/fs/ldiskfs/$(basename $mdsdev)/inode_goal"
-echo goal: $goal
+ echo goal: $goal
# 2147483648 is 0x80000000
do_facet $SINGLEMDS "echo 2147483648 >> $goal; grep . $goal"
touch $DIR/$tdir/$tfile
- # attrs from 1 to 15 go to block, 16th - to inode
- for i in {1..16}; do
+ # attrs from 1 to 16 go to block, 17th - to inode
+ for i in {1..17}; do
local nm="trusted.ea$i"
setfattr -n $nm -v $(printf "xattr%0250d" $i) $DIR/$tdir/$tfile
done
+ do_facet $SINGLEMDS $DEBUGFS -c -R "stat ROOT/$tdir/$tfile" $mdsdev
+
# inode <2147483649> trusted.ea16 (255)
local inode_num=$(do_facet $SINGLEMDS \
"$DEBUGFS -c -R 'stat ROOT/$tdir/$tfile' $mdsdev" |
- awk '/ea16/ { print $2 }' |
+ awk '/ea17/ { print $2 }' |
sed -e 's/>//' -e 's/<//' -e 's/\"//')
echo "inode num: $inode_num"
[ $inode_num -ge 2147483648 ] || error "inode $inode_num too small"
MDSSIZE=$old_mdssize
MDSISIZE=$old_mdsisize
- do_facet $SINGLEMDS $MKFS $opts17t $tmpmnt/$mdtimg ||
+
+ do_facet $SINGLEMDS $MKFS \
+ ${opts17t/-E /-E lazy_itable_init,lazy_journal_init,} \
+ $tmpmnt/$mdtimg ||
error "failed to mkfs for $tmpmnt/$mdtimg"
do_facet $SINGLEMDS $TUNE2FS -l $tmpmnt/$mdtimg |
}
run_test 117 "lctl get_param return errors properly"
+test_119() {
+ local had_config
+ local size_mb
+
+ [[ "$MDSCOUNT" -ge 2 ]] || skip "Need more at least 2 MDTs"
+
+ had_config=$(do_facet mds1 "$LCTL get_param debug | grep config")
+ do_facet mds1 "$LCTL set_param debug=+config"
+ do_facet mds1 "$LCTL clear"
+
+ setup
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ # mount after writeconf will make "add osp" added to mdt0 config:
+ # 53 (224)marker 60 (flags=0x01, v2.5.1.0) lustre-MDT0001 'add osp'
+ # 54 (080)add_uuid nid=... 0: 1:...
+ # 55 (144)attach 0:lustre-MDT0001-osp-MDT0000 1:osp 2:...
+ # 56 (144)setup 0:lustre-MDT0001-osp-MDT0000 1:... 2:...
+ # 57 (136)modify_mdc_tgts add 0:lustre-MDT0000-mdtlov 1:... 2:1 3:1
+ # duplicate modify_mdc_tgts caused crashes
+
+ debug_size_save
+ # using larger debug_mb size to avoid lctl dk log truncation
+ size_mb=$((DEBUG_SIZE_SAVED * 4))
+ for i in {1..3}; do
+ stop_mdt 2
+ # though config processing stops after failed attach and setup
+ # it will proceed after the failed command after each writeconf
+ # this is the original scenario of the issue
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)" &>/dev/null
+ do_facet mds1 "$LCTL set_param debug_mb=$size_mb"
+ start_mdt 2
+
+ wait_update_facet_cond mds1 \
+ "$LCTL dk | grep -c Processed.log.$FSNAME-MDT0000" \
+ ">" 1 300
+ done
+ debug_size_restore
+
+ [[ -z "$had_config" ]] && do_facet mds1 lctl set_param debug=-config
+
+ reformat
+}
+run_test 119 "writeconf on slave mdt shouldn't duplicate mdc/osp and crash"
+
test_120() { # LU-11130
[ "$MDSCOUNT" -lt 2 ] && skip "mdt count < 2"
[ "$mds1_FSTYPE" != ldiskfs ] &&
}
run_test 120 "cross-target rename should not create bad symlinks"
-test_122() {
+test_121(){
+ stopall
+ start_mgsmds || error "MGS MDS Start failed"
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+ #failback
+ start_mds
+ fail mgs
+ stop_mds || error "Stopping MDSes failed"
+}
+run_test 121 "failover MGS"
+
+test_122a() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
[[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
skip "Need OST version at least 2.11.53"
cleanup
}
-run_test 122 "Check OST sequence update"
+run_test 122a "Check OST sequence update"
+
+test_122b() {
+ [[ "$OST1_VERSION" -ge $(version_code 2.11.53) ]] ||
+ skip "Need OST version at least 2.11.53"
+ local err
+
+ reformat
+ LOAD_MODULES_REMOTE=true load_modules
+#define OBD_FAIL_OFD_SET_OID 0x1e0
+ do_facet ost1 $LCTL set_param fail_loc=0x00001e0
+
+ stack_trap cleanup EXIT
+ setup_noconfig
+ do_facet ost1 $LCTL set_param obdfilter.*.precreate_batch=256
+ $LFS mkdir -i0 -c1 $DIR/$tdir || error "failed to create directory"
+ $LFS setstripe -i0 -c1 $DIR/$tdir || error "failed to setstripe"
+ do_facet ost1 $LCTL set_param fail_loc=0
+ # overflow IDIF 32bit and create > OST_MAX_PRECREATE*5
+ # so a new wrong sequence would differ from an original with error
+ #define OST_MAX_PRECREATE 20000
+ local ost_max_precreate=20100
+ local num_create=$(( ost_max_precreate * 5 ))
+
+ # Check the number of inodes available on OST0
+ local files=0
+ local ifree=$($LFS df -i $MOUNT |
+ awk '/OST0000/ { print $4 }'; exit ${PIPESTATUS[0]})
+
+ log "On OST0, $ifree inodes available. Want $num_create. rc=$?"
+
+ if [ $ifree -lt 10000 ]; then
+ files=$(( ifree - 50 ))
+ else
+ files=10000
+ fi
+
+ local j=$((num_create / files + 1))
+
+ for i in $(seq 1 $j); do
+ createmany -o $DIR/$tdir/$tfile-$i- $files ||
+ error "createmany fail create $files files: $?"
+ unlinkmany $DIR/$tdir/$tfile-$i- $files ||
+ error "unlinkmany failed unlink $files files"
+ done
+ sync
+ touch $DIR/$tdir/$tfile
+ do_facet ost1 sync
+ #we need a write req during recovery for ofd_seq_load
+ replay_barrier ost1
+ dd if=/dev/urandom of=$DIR/$tdir/$tfile bs=1024k count=1 oflag=sync ||
+ error "failed to write file"
+
+ # OBD_FAIL_OST_CREATE_NET 0x204
+ do_facet ost1 $LCTL set_param fail_loc=0x80000204
+ fail ost1
+ createmany -o $DIR/$tdir/file_ 100
+ sync
+
+ err=$(do_facet ost1 dmesg | tac | sed "/Recovery over/,$ d" |
+ grep "OST replaced or reformatted")
+ [ -z "$err" ] || error $err
+}
+run_test 122b "Check OST sequence wouldn't change when IDIF 32bit overflows"
test_123aa() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
local yaml
local orig_val
+ local mgs_arg=""
+
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
orig_val=$(do_facet mgs $LCTL get_param jobid_name)
do_facet mgs $LCTL set_param -P jobid_name="TESTNAME"
- yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
+ yaml=$(do_facet mgs $LCTL $mgs_arg llog_print params |
grep jobid_name | tail -n 1)
local param=$(awk '{ print $10 }' <<< "$yaml")
local start=10
local end=50
+ local mgs_arg=""
+
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
[ -d $MOUNT/.lustre ] || setup
# - { index: 10, event: add_uuid, nid: 192.168.20.1@tcp(0x20000c0a81401,
# node: 192.168.20.1@tcp }
- do_facet mgs $LCTL --device MGS \
+ do_facet mgs $LCTL $mgs_arg \
llog_print --start $start --end $end $FSNAME-client | tr -d , |
while read DASH BRACE INDEX idx EVENT BLAH BLAH BLAH; do
(( idx >= start )) || error "llog_print index $idx < $start"
run_test 123ad "llog_print shows all records"
test_123ae() { # LU-11566
+ local max
+ local mgs_arg=""
+ local log
+ local id
+ local orig
+ local new
+ local rpcs
+
remote_mgs_nodsh && skip "remote MGS with nodsh"
[ -d $MOUNT/.lustre ] || setupall
- local max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ max=$($LCTL get_param -n osc.*-OST0000-*.max_dirty_mb | head -1)
+ pgs=$($LCTL get_param -n osc.*-OST0000-*.max_pages_per_rpc | head -1)
+ [[ $MGS_VERSION -gt $(version_code 2.13.54) ]] ||
+ mgs_arg="--device MGS"
if do_facet mgs "$LCTL help llog_cancel" 2>&1| grep -q -- --log_id; then
# save one set_param -P record in case none exist
- do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
- local log=params
- local orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL set_param -P osc.*.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL set_param -P -d \
+ osc.*.max_pages_per_rpc"
+
+ log=params
+ orig=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL set_param -P osc.*.max_dirty_mb=$max
- do_facet mgs $LCTL --device MGS llog_print $log | tail -1 |
+ do_facet mgs $LCTL $mgs_arg llog_print $log | tail -1 |
grep "parameter: osc.*.max_dirty_mb" ||
error "new set_param -P wasn't stored in params log"
# - { index: 71, event: set_param, device: general,
# param: osc.*.max_dirty_mb, value: 256 }
- local id=$(do_facet mgs $LCTL --device MGS llog_print $log |
- tail -1 | awk '{ print $4 }' | tr -d , )
-
- do_facet mgs $LCTL --device MGS llog_cancel $log --log_idx=$id
- local new=$(do_facet mgs $LCTL --device MGS llog_print $log |
+ id=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
+ tail -1 | awk '{ print $4 }' | tr -d , )
+ do_facet mgs $LCTL $mgs_arg llog_cancel $log --log_idx=$id
+ local new=$(do_facet mgs $LCTL $mgs_arg llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
(( new == orig )) ||
error "new llog_cancel now $new, not at $orig records"
# test old positional parameters for a while still
if [ "$MGS_VERSION" -le $(version_code 3.1.53) ]; then
log=$FSNAME-client
+
+ do_facet mgs $LCTL conf_param \
+ $FSNAME-OST0000.osc.max_pages_per_rpc=$pgs
+ stack_trap "do_facet mgs $LCTL conf_param -d \
+ $FSNAME-OST0000.osc.max_pages_per_rpc"
+
orig=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL conf_param $FSNAME-OST0000.osc.max_dirty_mb=$max
do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | grep "parameter: osc.max_dirty_mb" ||
error "old conf_param wasn't stored in params log"
-
+ do_facet mgs $LCTL --device MGS llog_print $log
# - { index: 71, event: conf_param, device: testfs-OST0000-osc,
# param: osc.max_dirty_mb=256 }
id=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
do_facet mgs $LCTL --device MGS llog_cancel $log $id
+ do_facet mgs $LCTL --device MGS llog_print $log
new=$(do_facet mgs $LCTL --device MGS llog_print $log |
tail -1 | awk '{ print $4 }' | tr -d , )
(( new == orig )) ||
}
run_test 123ae "llog_cancel can cancel requested record"
+test_123af() { #LU-13609
+ [ "$MGS_VERSION" -ge $(version_code 2.13.54) -a \
+ "$MDS1_VERSION" -ge $(version_code 2.13.54) ] ||
+ skip "Need both MGS and MDS version at least 2.13.54"
+
+ [ -d $MOUNT/.lustre ] || setupall
+ stack_trap "do_facet mds1 $LCTL set_param fail_loc=0" EXIT
+
+ local device
+ local facet
+ local cmd
+ local orig_clist
+ local orig_count
+ local new_clist
+ local new_count
+
+ for device in "MGS" "$FSNAME-MDT0000"; do
+ cmd="--device $device llog_catlist"
+ echo "lctl $cmd ..."
+ if [ "$device" = "MGS" ]; then
+ facet="mgs"
+ else
+ facet="mds1"
+ fi
+ orig_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ orig_count=${#orig_clist[@]}
+ echo "orig_clist: ${orig_clist[@]}"
+
+ #define OBD_FAIL_CATLIST 0x131b
+ #fetch to llog records from the second one
+ do_facet $facet $LCTL set_param fail_loc=0x131b fail_val=2
+
+ new_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+ new_count=${#new_clist[@]}
+ echo "new_clist: ${new_clist[@]}"
+
+ [ $new_count -eq $((orig_count - 1)) ] ||
+ error "$new_count != $orig_count - 1"
+ for i in $(seq 0 $new_count); do
+ j=$((i + 1))
+ [ "${orig_clist[$j]}" = "${new_clist[$i]}" ] ||
+ error "${orig_clist[$j]} != ${new_clist[$i]}"
+ done
+ do_facet mds1 $LCTL set_param fail_loc=0
+ echo "done"
+ done
+}
+run_test 123af "llog_catlist can show all config files correctly"
+
+test_123ag() { # LU-15142
+ local rec
+ local orig_val
+
+ remote_mgs_nodsh && skip "remote MGS with nodsh"
+ (( $MGS_VERSION >= $(version_code 2.14.55) )) ||
+ skip "Need server version least 2.14.55"
+
+ [ -d $MOUNT/.lustre ] || setup
+
+ orig_val=$(do_facet mgs $LCTL get_param jobid_name)
+ stack_trap "do_facet mgs $LCTL set_param -P jobid_name=$orig_val"
+
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ do_facet mgs $LCTL set_param -P -d jobid_name
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #1"
+ do_facet mgs $LCTL set_param -P jobid_name="TESTNAME1"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 1)) || error "parameter is not set"
+ # usage with ordinary set_param format works too
+ do_facet mgs $LCTL set_param -P -d jobid_name="ANY"
+ rec=$(do_facet mgs $LCTL --device MGS llog_print params |
+ grep -c jobid_name)
+ (( rec == 0 )) || error "parameter was not deleted, check #2"
+}
+run_test 123ag "llog_print skips values deleted by set_param -P -d"
+
test_123F() {
remote_mgs_nodsh && skip "remote MGS with nodsh"
echo "Writeconf"
writeconf_all
echo "Remounting"
- mountmgs
- mountmds
- mountoss
- mountcli
+ setup_noconfig
# Reapply the config from before
echo "Setting configuration parameters"
[ -z $mds2failover_HOST ] && skip "needs MDT failover setup"
setup
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp && error "Should not be fake nid"
+ do_facet mgs $LCTL conf_param $FSNAME-MDT0001.failover.node=1.2.3.4@tcp\
+ || error "Set params error"
+ do_facet mgs $LCTL --device MGS llog_print $FSNAME-client |
+ grep 1.2.3.4@tcp || error "Fake nid should be added"
cleanup
load_modules
echo "Before: ${facet} ${device} ${pre_max_sectors} ${max_hw_sectors}"
- do_facet ${facet} "libtool execute l_tunedisk ${device}"
+ do_facet ${facet} "l_tunedisk ${device}"
# Value after l_tunedisk
local post_max_sectors=$(get_max_sectors_kb ${facet} ${device})
}
run_test 126 "mount in parallel shouldn't cause a crash"
+test_127() {
+ [[ "$ost1_FSTYPE" == ldiskfs ]] || skip "ldiskfs only test"
+
+ cleanup
+ setup
+ zconf_umount_clients $RCLIENTS $MOUNT
+
+ wait_osp_active ost ${FSNAME}-OST0000 0 1
+ local osc_tgt="$FSNAME-OST0000-osc-$($LFS getname -i $DIR)"
+ local avail1=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ $LFS setstripe -i 0 $DIR/$tfile || error "failed creating $DIR/$tfile"
+ dd if=/dev/zero of=$DIR/$tfile bs=1M oflag=direct || true
+
+ local avail2=($($LCTL get_param -n osc.${osc_tgt}.kbytesavail))
+
+ if ((avail2 * 100 / avail1 > 1)); then
+ lfs df $DIR
+ ls -l $DIR/$tfile
+ error "more than 1% space left: before=$avail1 after=$avail2"
+ fi
+
+ local mbs=$(($(stat -c %s $DIR/$tfile) / (1024 * 1024)))
+
+ dd if=/dev/zero of=$DIR/$tfile bs=1M count=$mbs conv=notrunc \
+ oflag=direct || error "overwrite failed"
+}
+run_test 127 "direct io overwrite on full ost"
+
+test_128()
+{
+ combined_mgs_mds && skip "need separate mgs device"
+ [ "$ost2_FSTYPE" == zfs ] && import_zpool ost2
+
+ format_ost 2
+ # Try to apply nolocallogs to the virgin OST. Should fail.
+ do_facet ost2 "$TUNEFS --nolocallogs $(ostdevname 2)" &&
+ error "nolocallogs should not be allowed on the virgin target"
+
+ setupall
+ stopall
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Start OST without MGS (local configs)
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)"
+ start_ost || error "unable to start OST1"
+ stop_ost || error "Unable to stop OST1"
+
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ # Do not allow reading local configs, should fail
+ do_facet ost1 "$TUNEFS --nolocallogs $(ostdevname 1)" ||
+ error "Can not set nolocallogs"
+ start_ost && error "OST1 started, but should fail"
+
+ # Connect to MGS successfully, reset nolocallogs flag
+ [ "$ost1_FSTYPE" == zfs ] && import_zpool ost1
+ start_mgs || error "unable to start MGS"
+ start_ost || error "unable to start OST1"
+
+ do_facet ost1 "$TUNEFS --dryrun $(ostdevname 1)" | grep "nolocallogs" &&
+ error "nolocallogs expected to be reset"
+
+ stop_ost || error "Unable to stop OST1"
+}
+run_test 128 "Force using remote logs with --nolocallogs"
+
+test_129()
+{
+ stopall
+ start_mds || error "MDS start failed"
+ format_ost 1
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "start ost1 should fail" || true
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &&
+ error "second start ost1 should fail" || true
+ do_facet ost1 "$TUNEFS --writeconf $(ostdevname 1)"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS ||
+ error "start ost1 failed"
+ stop ost1
+ stop_mds
+}
+run_test 129 "attempt to connect an OST with the same index should fail"
+
+test_130()
+{
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs"
+ setupall
+ stop_mdt 2 || error "mdt2 stop failed"
+ do_facet mds2 "$TUNEFS --writeconf $(mdsdevname 2)"
+ start_mdt 2 || error "mdt2 start failed"
+ do_facet mds2 "$LCTL dl" | grep MDT0001-osp-MDT0001 &&
+ error "Illegal OSP device created" || true
+}
+run_test 130 "re-register an MDT after writeconf"
+
+test_131() {
+ [ "$mds1_FSTYPE" == "ldiskfs" ] || skip "ldiskfs only test"
+ do_facet mds1 $DEBUGFS -R features $(mdsdevname 1) |
+ grep -q project || skip "skip project quota not supported"
+
+ local projid
+
+ setupall
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir
+ $LFS project -p 1000 $DIR/$tdir || error "set dir project id failed"
+ createmany -o $DIR/$tdir/f 512
+ for ((i = 0; i < 512; ++i)); do
+ $LFS project -p $i $DIR/$tdir/f${i} ||
+ error "set f${i} project id failed"
+ done
+
+ test_mkdir -c $MDSCOUNT -p $DIR/$tdir.inherit
+ $LFS project -p 1001 -s $DIR/$tdir.inherit
+ createmany -o $DIR/$tdir.inherit/f 128
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "files did not inherit projid 1001"
+
+ stopall
+
+ for i in $(seq $MDSCOUNT); do
+ mds_backup_restore mds$i ||
+ error "Backup/restore on mds$i failed"
+ done
+
+ setupall
+
+ projid=($($LFS project -d $DIR/$tdir))
+ [ ${projid[0]} == "1000" ] ||
+ error "projid expected 1000 not ${projid[0]}"
+ for ((i = 0; i < 512; ++i)); do
+ projid=($($LFS project $DIR/$tdir/f${i}))
+ [ ${projid[0]} == "$i" ] ||
+ error "projid expected $i not ${projid[0]}"
+ done
+
+ (( $($LFS project $DIR/$tdir.inherit/f* |
+ awk '$1 == 1001 { print }' | wc -l) == 128 )) ||
+ error "restore did not copy projid 1001"
+}
+run_test 131 "MDT backup restore with project ID"
+
+test_132() {
+ local err_cnt
+ local err_cnt2
+
+ reformat
+ combined_mgs_mds || start_mgs || error "unable to start MGS"
+ start_mdt 1 || error "unable to start mdt1"
+
+ err_cnt=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ stop_mdt 1 || error "stop mdt1 failed"
+
+ [ "$mds1_FSTYPE" == zfs ] && import_zpool mds1
+ do_facet mds1 $TUNEFS --param mdt.hsm_control=enabled $(mdsdevname 1) ||
+ error "tunefs failed"
+ start_mdt 1 || error "cannot start mdt1"
+
+ err_cnt2=$(do_facet mds1 dmesg | grep -c "cannot take the layout locks")
+ [ $err_cnt -eq $err_cnt2 ] || error "Can not take the layout lock"
+ stop_mdt 1 || error "stop mdt1 failed"
+}
+run_test 132 "hsm_actions processed after failover"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff