LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
+MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
. $LUSTRE/tests/test-framework.sh
}
stop_mds() {
echo "stop mds service on `facet_active_host mds`"
- stop mds $@ || return 97
+ stop mds $@ || return 97
}
start_ost() {
stop_ost() {
echo "stop ost service on `facet_active_host ost`"
- stop ost $@ || return 98
+ stop ost $@ || return 98
}
mount_client() {
setup() {
start_ost
start_mds
- mount_client $MOUNT
+ mount_client $MOUNT
}
cleanup() {
stop_mds || return 201
stop_ost || return 202
# catch case where these return just fine, but modules are still not unloaded
- /sbin/lsmod | grep -q portals
+ /sbin/lsmod | grep -q portals
if [ 1 -ne $? ]; then
echo "modules still loaded..."
return 203
test_0() {
start_ost
start_mds
- mount_client $MOUNT
+ mount_client $MOUNT
check_mount || return 41
cleanup || return $?
}
test_1() {
start_ost
echo "start ost second time..."
- start ost --reformat $OSTLCONFARGS
+ start ost --reformat $OSTLCONFARGS
start_mds
mount_client $MOUNT
check_mount || return 42
start_ost
start_mds
echo "start mds second time.."
- start mds --reformat $MDSLCONFARGS
+ start mds --reformat $MDSLCONFARGS
- mount_client $MOUNT
+ mount_client $MOUNT
check_mount || return 43
cleanup || return $?
}
run_test 2 "start up mds twice"
test_3() {
- setup
+ setup
mount_client $MOUNT
check_mount || return 44
setup
touch $DIR/$tfile || return 85
stop_ost --force
- cleanup
+ cleanup
eno=$?
# ok for ost to fail shutdown
if [ 202 -ne $eno ]; then
touch $DIR/$tfile || return 1
stop_mds --force || return 2
- # cleanup may return an error from the failed
- # disconnects; for now I'll consider this successful
+ # cleanup may return an error from the failed
+ # disconnects; for now I'll consider this successful
# if all the modules have unloaded.
umount $MOUNT &
UMOUNT_PID=$!
echo "killing umount"
kill -TERM $UMOUNT_PID
echo "waiting for umount to finish"
- wait $UMOUNT_PID
+ wait $UMOUNT_PID
# cleanup client modules
- $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
# stop_mds is a no-op here, and should not fail
stop_mds || return 4
stop_mds
[ -d $MOUNT ] || mkdir -p $MOUNT
- $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
+ $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
llmount $mds_HOST://mds_svc/client_facet $MOUNT && exit 1
# cleanup client modules
- $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
# stop_mds is a no-op here, and should not fail
stop_mds || return 2
start_mds
[ -d $MOUNT ] || mkdir -p $MOUNT
- $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
+ $LCONF --nosetup --node client_facet $XMLCONFIG > /dev/null
llmount $mds_HOST://wrong_mds_svc/client_facet $MOUNT && exit 1
# cleanup client modules
- $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
stop_mds || return 2
stop_ost || return 3
start_ost
start_mds
- mount_client $MOUNT
- mount_client $MOUNT2
+ mount_client $MOUNT
+ mount_client $MOUNT2
check_mount2 || return 45
umount $MOUNT
- umount_client $MOUNT2
+ umount_client $MOUNT2
stop_mds
stop_ost
# backup the old values of PTLDEBUG and SUBSYSTEM
OLDPTLDEBUG=$PTLDEBUG
OLDSUBSYSTEM=$SUBSYSTEM
-
+
# generate new configuration file with lmc --ptldebug and --subsystem
PTLDEBUG="trace"
SUBSYSTEM="mdc"
add_ost ost --dev $OSTDEV --size $OSTSIZE
add_client client mds --path $MOUNT --ost ost_svc || return $?
echo "Default lov config success!"
-
+
[ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
add_mds mds --dev $MDSDEV --size $MDSSIZE
add_ost ost --dev $OSTDEV --size $OSTSIZE
else
echo "matched double quote fail"
return 1
- fi
+ fi
rm -f $XMLCONFIG
rm -f $BATCHFILE
echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
--stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
- --mkfsoptions "-Llabel_conf_15"
+ --mkfsoptions "-Llabel_conf_14"
add_client client mds --lov lov1 --path $MOUNT
FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
- EXPECTEDSTRING="mkfsoptions>-Llabel_conf_15"
+ EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
if [ $EXPECTEDSTRING != $FOUNDSTRING ]; then
echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
return 1
start_ost
start_mds
mount_client $MOUNT || return $?
- if [ -z "`dumpe2fs -h $OSTDEV | grep label_conf_15`" ]; then
+ if [ -z "`dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
echo "Error: the mkoptions not applied to mke2fs of ost."
return 1
fi
}
run_test 14 "test mkfsoptions of ost for lmc and lconf"
+cleanup_15() {
+ trap 0
+ [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
+ if [ -f $MOUNTLUSTRE.sav ]; then
+ echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
+ mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
+ fi
+}
+
+test_15() {
+ start_ost
+ start_mds
+ echo "mount lustre on ${MOUNT} with $MOUNTLUSTRE....."
+ if [ -f "$MOUNTLUSTRE" ]; then
+ echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
+ mv $MOUNTLUSTRE $MOUNTLUSTRE.sav
+ fi
+ [ -f "$MOUNTLUSTRE" ] && echo "can't move $MOUNTLUSTRE" && return 40
+ trap cleanup_15 EXIT INT
+ [ ! `cp $LUSTRE/utils/llmount $MOUNTLUSTRE` ] || return $?
+ do_node `hostname` mkdir -p $MOUNT 2> /dev/null
+ # load llite module on the client if it isn't in /lib/modules
+ do_node `hostname` lconf --nosetup --node client_facet $XMLCONFIG
+ do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
+ `facet_active_host mds`:/mds_svc/client_facet $MOUNT ||return $?
+ echo "mount lustre on $MOUNT with $MOUNTLUSTRE: success"
+ [ -d /r ] && $LCTL modules > /r/tmp/ogdb-`hostname`
+ check_mount || return 41
+ do_node `hostname` umount $MOUNT
+
+ [ -f "$MOUNTLUSTRE" ] && rm -f $MOUNTLUSTRE
+ echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
+ do_node `hostname` mount -t lustre -o nettype=$NETTYPE \
+ `facet_active_host mds`:/mds_svc/client_facet $MOUNT &&return $?
+ echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
+ cleanup || return $?
+ cleanup_15
+}
+run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
+
+test_16() {
+ TMPMTPT="/mnt/conf16"
+
+ if [ ! -f "$MDSDEV" ]; then
+ echo "no $MDSDEV existing, so mount Lustre to create one"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+ fi
+
+ echo "change the mode of $MDSDEV/OBJECTS,LOGS,PENDING to 555"
+ [ -d $TMPMTPT ] || mkdir -p $TMPMTPT
+ mount -o loop -t ext3 $MDSDEV $TMPMTPT || return $?
+ chmod 555 $TMPMTPT/OBJECTS || return $?
+ chmod 555 $TMPMTPT/LOGS || return $?
+ chmod 555 $TMPMTPT/PENDING || return $?
+ umount $TMPMTPT || return $?
+
+ echo "mount Lustre to change the mode of OBJECTS/LOGS/PENDING, then umount Lustre"
+ start_ost
+ start_mds
+ mount_client $MOUNT
+ check_mount || return 41
+ cleanup || return $?
+
+ echo "read the mode of OBJECTS/LOGS/PENDING and check if they has been changed properly"
+ EXPECTEDOBJECTSMODE=`debugfs -R "stat OBJECTS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+ EXPECTEDLOGSMODE=`debugfs -R "stat LOGS" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+ EXPECTEDPENDINGMODE=`debugfs -R "stat PENDING" $MDSDEV 2> /dev/null | awk '/Mode: /{print $6}'`
+
+ if [ $EXPECTEDOBJECTSMODE = "0777" ]; then
+ echo "Success:Lustre change the mode of OBJECTS correctly"
+ else
+ echo "Error: Lustre does not change the mode of OBJECTS properly"
+ return 1
+ fi
+
+ if [ $EXPECTEDLOGSMODE = "0777" ]; then
+ echo "Success:Lustre change the mode of LOGS correctly"
+ else
+ echo "Error: Lustre does not change the mode of LOGS properly"
+ return 1
+ fi
+
+ if [ $EXPECTEDPENDINGMODE = "0777" ]; then
+ echo "Success:Lustre change the mode of PENDING correctly"
+ else
+ echo "Error: Lustre does not change the mode of PENDING properly"
+ return 1
+ fi
+}
+run_test 16 "verify that lustre will correct the mode of OBJECTS/LOGS/PENDING"
+
equals_msg "Done"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff