ONLY=${ONLY:-"$*"}
-# These tests don't apply to mountconf
-MOUNTCONFSKIP="10 11 12 13 13b 14 15"
# bug number for skipped test: 13739
HEAD_EXCEPT=" 32a 32b "
# bug number for skipped test:
-ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $MOUNTCONFSKIP $HEAD_EXCEPT"
+ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $HEAD_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
SRCDIR=`dirname $0`
SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
-MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
-MKFSLUSTRE=${MKFSLUSTRE:-/usr/sbin/mkfs.lustre}
-HOSTNAME=`hostname`
. $LUSTRE/tests/test-framework.sh
init_test_env $@
# use small MDS + OST size to speed formatting time
MDSSIZE=40000
OSTSIZE=40000
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
#
[ "$SLOW" = "no" ] && EXCEPT_SLOW="0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a "
}
writeconf() {
- local facet=mds
+ local facet=$SINGLEMDS
+ local dev=${facet}_dev
shift
stop ${facet} -f
rm -f ${facet}active
# who knows if/where $TUNEFS is installed? Better reformat if it fails...
- do_facet ${facet} "$TUNEFS --writeconf $MDSDEV" || echo "tunefs failed, reformatting instead" && reformat
+ do_facet ${facet} "$TUNEFS --writeconf ${!dev}" || echo "tunefs failed, reformatting instead" && reformat
}
gen_config() {
}
start_mds() {
- echo "start mds service on `facet_active_host mds`"
- start mds $MDSDEV $MDS_MOUNT_OPTS || return 94
+ local facet=$SINGLEMDS
+ local dev=${facet}_dev
+ echo "start mds service on `facet_active_host $facet`"
+ start $facet ${!dev} $MDS_MOUNT_OPTS || return 94
}
stop_mds() {
- echo "stop mds service on `facet_active_host mds`"
+ echo "stop mds service on `facet_active_host $SINGLEMDS`"
# These tests all use non-failover stop
- stop mds -f || return 97
+ stop $SINGLEMDS -f || return 97
}
start_ost() {
run_test 9 "test ptldebug and subsystem for mkfs"
-test_10() {
- echo "generate configuration with the same name for node and mds"
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="broken.xml"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- facet="mds"
- rm -f ${facet}active
- add_facet $facet
- echo "the name for node and mds is the same"
- do_lmc --add mds --node ${facet}_facet --mds ${facet}_facet \
- --dev $MDSDEV --size $MDSSIZE || return $?
- do_lmc --add lov --mds ${facet}_facet --lov lov1 --stripe_sz \
- $STRIPE_BYTES --stripe_cnt $STRIPES_PER_OBJ \
- --stripe_pattern 0 || return $?
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
- facet="client"
- add_facet $facet --lustre_upcall $UPCALL
- do_lmc --add mtpt --node ${facet}_facet --mds mds_facet \
- --lov lov1 --path $MOUNT
-
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT
- check_mount || return 41
- cleanup || return $?
-
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 10 "mount lustre with the same name for node and mds"
-
-test_11() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf11.xml"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT --ost ost_svc || return $?
- echo "Default lov config success!"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT && return $?
- echo "--add mtpt with neither --lov nor --ost will return error"
-
- echo ""
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 11 "use default lov configuration (should return error)"
-
-test_12() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="batch.xml"
- BATCHFILE="batchfile"
-
- # test double quote
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
- # --mkfsoptions "-I 128"
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched double quote success"
- else
- echo "matched double quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
- # --mkfsoptions "-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched double quote should return error"
-
- # test single quote
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
- # --mkfsoptions '-I 128'
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched single quote success"
- else
- echo "matched single quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
- # --mkfsoptions '-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched single quote should return error"
-
- # test backslash
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
- # --mkfsoptions \-\I\ \128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "backslash followed by a whitespace/letter success"
- else
- echo "backslash followed by a whitespace/letter fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
- # --mkfsoptions -I\ 128\
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "backslash followed by nothing should return error"
-
- rm -f $BATCHFILE
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
-
-test_13a() { # was test_13
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
-
- # check long uuid will be truncated properly and uniquely
- echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- do_lmc --add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp
- do_lmc --add mds --node $HOSTNAME --mds mds1_name_longer_than_31characters
- do_lmc --add mds --node $HOSTNAME --mds mds2_name_longer_than_31characters
- if [ ! -f "$XMLCONFIG" ]; then
- echo "Error:no file $XMLCONFIG created!"
- return 1
- fi
- EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
- EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
- FOUNDMDS1UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '1p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- FOUNDMDS2UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '2p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- [ -z "$FOUNDMDS1UUID" ] && echo "MDS1 UUID empty" && return 1
- [ -z "$FOUNDMDS2UUID" ] && echo "MDS2 UUID empty" && return 1
- if ([ $EXPECTEDMDS1UUID = $FOUNDMDS1UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS2UUID ]) || \
- ([ $EXPECTEDMDS1UUID = $FOUNDMDS2UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS1UUID ]); then
- echo "Success:long uuid truncated successfully and being unique."
- else
- echo "Error:expected uuid for mds1 and mds2: $EXPECTEDMDS1UUID; $EXPECTEDMDS2UUID"
- echo "but: found uuid for mds1 and mds2: $FOUNDMDS1UUID; $FOUNDMDS2UUID"
- return 1
- fi
- rm -f $XMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13a "check new_uuid of lmc operating correctly"
-
-test_13b() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
- SECONDXMLCONFIG="conf13-2.xml"
- # check multiple invocations for lmc generate same XML configuration file
- rm -f $XMLCONFIG
- echo "Generate the first XML configuration file"
- gen_config
- echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
- sed -e "s/mtime[^ ]*//" $XMLCONFIG > $SECONDXMLCONFIG || return $?
- echo "Generate the second XML configuration file"
- gen_config
- # don't compare .xml mtime, it will always be different
- if [ `sed -e "s/mtime[^ ]*//" $XMLCONFIG | diff - $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
- echo "Success:multiple invocations for lmc generate same XML file"
- else
- echo "Error: multiple invocations for lmc generate different XML file"
- return 1
- fi
-
- rm -f $XMLCONFIG $SECONDXMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13b "check lmc generates consistent .xml file"
-
-test_14() {
- rm -f $XMLCONFIG
-
- # create xml file with --mkfsoptions for ost
- echo "create xml file with --mkfsoptions for ost"
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
- --mkfsoptions "-Llabel_conf_14"
- add_client client mds --lov lov1 --path $MOUNT
-
- FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
- EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
- if [ "$EXPECTEDSTRING" != "$FOUNDSTRING" ]; then
- echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
- return 1
- fi
- echo "Success:mkfsoptions for ost written to xml file correctly."
-
- # mount lustre to test lconf mkfsoptions-parsing
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT || return $?
- if [ -z "`do_facet ost1 dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
- echo "Error: the mkoptions not applied to mke2fs of ost."
- return 1
- fi
- cleanup
- echo "lconf mkfsoptions for ost success"
-
- gen_config
-}
-run_test 14 "test mkfsoptions of ost for lmc and lconf"
-
-cleanup_15() {
- trap 0
- [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
- if [ -f $MOUNTLUSTRE.sav ]; then
- echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
- mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
- fi
-}
-
-# this only tests the kernel mount command, not anything about lustre.
-test_15() {
- MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
- start_ost
- start_mds
-
- echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
- if [ -f "$MOUNTLUSTRE" ]; then
- echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
- mv $MOUNTLUSTRE $MOUNTLUSTRE.sav && trap cleanup_15 EXIT INT
- if [ -f $MOUNTLUSTRE ]; then
- skip "$MOUNTLUSTRE cannot be moved, skipping test"
- return 0
- fi
- fi
-
- mount_client $MOUNT && error "mount succeeded" && return 1
- echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
- cleanup_15
- cleanup || return $?
-}
-run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
-
# LOGS/PENDING do not exist anymore since CMD3
test_16() {
- TMPMTPT="${TMP}/conf16"
-
+ local TMPMTPT="${TMP}/conf16"
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
if [ ! -e "$MDSDEV" ]; then
log "no $MDSDEV existing, so mount Lustre to create one"
setup
[ -f "$MDSDEV" ] && LOOPOPT="-o loop"
log "change the mode of $MDSDEV/OBJECTS to 555"
- do_facet mds "mkdir -p $TMPMTPT &&
+ do_facet $SINGLEMDS "mkdir -p $TMPMTPT &&
mount $LOOPOPT -t $FSTYPE $MDSDEV $TMPMTPT &&
chmod 555 $TMPMTPT/OBJECTS &&
umount $TMPMTPT" || return $?
cleanup || return $?
log "read the mode of OBJECTS and check if they has been changed properly"
- EXPECTEDOBJECTSMODE=`do_facet mds "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
+ EXPECTEDOBJECTSMODE=`do_facet $SINGLEMDS "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
if [ "$EXPECTEDOBJECTSMODE" = "0777" ]; then
log "Success:Lustre change the mode of OBJECTS correctly"
run_test 16 "verify that lustre will correct the mode of OBJECTS"
test_17() {
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
if [ ! -e "$MDSDEV" ]; then
echo "no $MDSDEV existing, so mount Lustre to create one"
setup
fi
echo "Remove mds config log"
- do_facet mds "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
+ do_facet $SINGLEMDS "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
start_ost
start_mds && return 42
test_18() {
[ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
local MIN=2000000
local OK=
test_23a() { # was test_23
setup
# fail mds
- stop mds
+ stop $SINGLEMDS
# force down client so that recovering mds waits for reconnect
local running=$(grep -c $MOUNT /proc/mounts) || true
if [ $running -ne 0 ]; then
umount_client $MOUNT
# the MDS must remain up until last MDT
stop_mds
- MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+ MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
[ -z "$MDS" ] && error "No MDT" && return 8
cleanup_24a
cleanup_nocli || return 6
test_26() {
load_modules
# we need modules before mount for sysctl, so make sure...
- do_facet mds "lsmod | grep -q lustre || modprobe lustre"
+ do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
#define OBD_FAIL_MDS_FS_SETUP 0x135
- do_facet mds "lctl set_param fail_loc=0x80000135"
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000135"
start_mds && echo MDS started && return 1
lctl get_param -n devices
DEVS=$(lctl get_param -n devices | wc -l)
FINAL=$(($ORIG + 5))
fi
echo "Setting $PARAM from $ORIG to $FINAL"
- do_facet mds "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
+ do_facet $SINGLEMDS "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
local RESULT
local MAX=90
local WAIT=0
run_test 27a "Reacquire MGS lock if OST started first"
test_27b() {
+ # FIXME. ~grev
setup
- facet_failover mds
- set_and_check mds "lctl get_param -n mdt.$FSNAME-MDT0000.identity_acquire_expire" "$FSNAME-MDT0000.mdt.identity_acquire_expire" || return 3
- set_and_check client "lctl get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" "$FSNAME-MDT0000.mdc.max_rpcs_in_flight" || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+
+ facet_failover $SINGLEMDS
+ set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
+ set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
check_mount
cleanup
}
local WAIT=0
while [ 1 ]; do
sleep 5
- RESULT=`do_facet mds " lctl get_param -n $MPROC"`
+ RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
[ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
if [ $RESULT -eq $DEAC ]; then
echo "MDT deactivated also after $WAIT sec (got $RESULT)"
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
- do_facet mds "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
+ do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
mkdir -p $MOUNT2
mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
echo "ok."
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- do_facet mds $LCTL conf_param ${FSNAME}-MDT0000.failover.node=$FAKENID || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
# contact after the connection loss
$LCTL dk $TMP/lustre-log-$TESTNAME.log
NEXTCONN=`awk "/${MSG}/ {start = 1;}
- /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
+ /import_select_connection.$device-mdc.* using connection/ {
if (start) {
if (\\\$NF ~ /$FAKENID/)
print \\\$NF;
stop_mds
log "rename lov_objid file on MDS"
rm -f $TMP/lov_objid.orig
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
- do_facet mds "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.orig"
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
+ do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
+
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.orig"
# check create in mds_lov_connect
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new"
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new"
[ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
# check it's updates in sync
umount_client $MOUNT
stop_mds
- do_facet mds dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
- do_facet mds "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
- do_facet mds "debugfs -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
+ do_facet $SINGLEMDS dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
+ do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
+ do_facet $SINGLEMDS "debugfs -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
start_mds
mount_client $MOUNT
[ $V ] && log "verifying $DIR/$tdir/$f"
diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new1"
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new1"
umount_client $MOUNT
stop_mds
[ "$ERROR" = "y" ] && error "old and new files are different after sync" || true
test_40() { # bug 15759
start_ost
#define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
- do_facet mds "sysctl -w lustre.fail_loc=0x80000706"
+ do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
start_mds
cleanup
}
test_41() { #bug 14134
local rc
- start mds $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
start ost1 `ostdevname 1` $OST_MOUNT_OPTS
- start mds $MDSDEV $MDS_MOUNT_OPTS -o nomgs
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs
mkdir -p $MOUNT
mount_client $MOUNT || return 1
sleep 5
umount_client $MOUNT
stop ost1 -f || return 201
- stop mds -f || return 202
- stop mds -f || return 203
+ stop_mds -f || return 202
+ stop_mds -f || return 203
unload_modules || return 204
return $rc
}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff