ONLY=${ONLY:-"$*"}
-# bug number for skipped test: LU-7428
-ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 84"
+# bug number for skipped test: LU-8972
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
is_sles11() # LU-2181
fi
[ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
-# bug number for skipped test: LU-4444
- ALWAYS_EXCEPT="$ALWAYS_EXCEPT 69"
+# bug number for skipped test:
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT"
init_logging
test_5d() {
grep " $MOUNT " /etc/mtab &&
- error false "unexpected entry in mtab before mount" && return 10
+ error "unexpected entry in mtab before mount"
start_ost || error "OST start failed"
start_mds || error "MDS start failed"
- stop_ost || error "Unable to stop OST1"
+ stop_ost -f || error "Unable to stop OST1"
mount_client $MOUNT || error "mount_client $MOUNT failed"
umount_client $MOUNT -f || error "umount_client $MOUNT failed"
cleanup_nocli || error "cleanup_nocli failed with $?"
- grep " $MOUNT " /etc/mtab &&
+ ! grep " $MOUNT " /etc/mtab ||
error "$MOUNT entry in mtab after unmount"
- pass
}
run_test 5d "mount with ost down"
}
run_test 5f "mds down, cleanup after failed mount (bug 2712)"
+test_5g() {
+ modprobe lustre
+ [ $(lustre_version_code client) -lt $(version_code 2.9.53) ] &&
+ { skip "automount of debugfs missing before 2.9.53" && return 0; }
+ umount /sys/kernel/debug
+ $LCTL get_param -n devices | egrep -v "error" && \
+ error "lctl can't access debugfs data"
+ grep " debugfs " /etc/mtab || error "debugfs failed to remount"
+}
+run_test 5g "handle missing debugfs"
+
test_6() {
setup
manual_umount_client
test_19b() {
start_ost || error "Unable to start OST1"
- stop_ost || error "Unable to stop OST1"
+ stop_ost -f || error "Unable to stop OST1"
}
run_test 19b "start/stop OSTs without MDS"
destroy_zpool $facet $poolname
done
fi
+ combined_mgs_mds || start_mgs || rc=$?
return $rc
}
local mdt2_is_available=false
local node=$(facet_active_host $SINGLEMDS)
local r="do_node $node"
- local node2=$(facet_active_host mds2)
local tmp=$TMP/t32
local img_commit
local img_kernel
local stripe_count
local dir
+ combined_mgs_mds || stop_mgs || error "Unable to stop MGS"
trap 'trap - RETURN; t32_test_cleanup' RETURN
load_modules
! $mdt2_is_available || poolname_list+=" t32fs-mdt2"
for poolname in $poolname_list; do
- $r "$ZPOOL list -H $poolname >/dev/null 2>&1 ||
+ $r "modprobe zfs;
+ $ZPOOL list -H $poolname >/dev/null 2>&1 ||
$ZPOOL import -f -d $tmp $poolname"
done
mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
fi
- add fs2mds $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
+ add $SINGLEMDS $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
$mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
error_noexit "Mkfs new MDT failed"
return 1
}
- [[ $(facet_fstype mds1) != zfs ]] || import_zpool fs2mds
+ [[ $(facet_fstype mds1) != zfs ]] || import_zpool mds1
$r $TUNEFS --dryrun $fs2mdsdev || {
error_noexit "tunefs.lustre before mounting the MDT"
if [[ $fstype == zfs ]]; then
local poolname=t32fs-mdt1
- $r "$ZPOOL list -H $poolname >/dev/null 2>&1 ||
+ $r "modprobe zfs;
+ $ZPOOL list -H $poolname >/dev/null 2>&1 ||
$ZPOOL import -f -d $tmp $poolname"
fi
return
fi
- local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ combined_mgs_mds ||
+ { skip "needs combined MGT and MDT device" && return 0; }
start_mdt 1 -o nosvc -n
if [ $MDSCOUNT -ge 2 ]; then
test_41c() {
local server_version=$(lustre_version_code $SINGLEMDS)
+ local oss_list=$(comma_list $(osts_nodes))
[[ $server_version -ge $(version_code 2.6.52) ]] ||
[[ $server_version -ge $(version_code 2.5.26) &&
$server_version -lt $(version_code 2.5.11) ]] ||
{ skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
+ # ensure mds1 ost1 have been created even if running sub-test standalone
cleanup
+ setup
+ cleanup || error "cleanup failed"
+
+ # using directly mount command instead of start() function to avoid
+ # any side effect of // with others/externals tools/features
+ # ("zpool import", ...)
+
# MDT concurrent start
+
+ LOAD_MODULES_REMOTE=true load_modules
+ do_facet $SINGLEMDS "lsmod | grep -q libcfs" ||
+ error "MDT concurrent start: libcfs module not loaded"
+
+ local mds1dev=$(mdsdevname 1)
+ local mds1mnt=$(facet_mntpt mds1)
+ local mds1fstype=$(facet_fstype mds1)
+ local mds1opts=$MDS_MOUNT_OPTS
+
+ if [ $mds1fstype == ldiskfs ] &&
+ ! do_facet mds1 test -b $mds1dev; then
+ mds1opts=$(csa_add "$mds1opts" -o loop)
+ fi
+ if [[ $mds1fstype == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
#define OBD_FAIL_TGT_MOUNT_RACE 0x716
- do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x716"
- start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS &
+ do_facet mds1 "$LCTL set_param fail_loc=0x80000716"
+
+ do_facet mds1 mount -t lustre $mds1dev $mds1mnt $mds1opts &
local pid=$!
- start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS &
- do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x0"
- local pid2=$!
- wait $pid2
+
+ do_facet mds1 mount -t lustre $mds1dev $mds1mnt $mds1opts
local rc2=$?
wait $pid
local rc=$?
+ do_facet mds1 "$LCTL set_param fail_loc=0x0"
if [ $rc -eq 0 ] && [ $rc2 -ne 0 ]; then
echo "1st MDT start succeed"
echo "2nd MDT start failed with $rc2"
# OST concurrent start
+ do_rpc_nodes $oss_list "lsmod | grep -q libcfs" ||
+ error "OST concurrent start: libcfs module not loaded"
+
+ local ost1dev=$(ostdevname 1)
+ local ost1mnt=$(facet_mntpt ost1)
+ local ost1fstype=$(facet_fstype ost1)
+ local ost1opts=$OST_MOUNT_OPTS
+
+ if [ $ost1fstype == ldiskfs ] &&
+ ! do_facet ost1 test -b $ost1dev; then
+ ost1opts=$(csa_add "$ost1opts" -o loop)
+ fi
+ if [[ $ost1fstype == zfs ]]; then
+ import_zpool ost1 || return ${PIPESTATUS[0]}
+ fi
+
#define OBD_FAIL_TGT_MOUNT_RACE 0x716
- do_facet ost1 "$LCTL set_param fail_loc=0x716"
- start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &
+ do_facet ost1 "$LCTL set_param fail_loc=0x80000716"
+
+ do_facet ost1 mount -t lustre $ost1dev $ost1mnt $ost1opts &
pid=$!
- start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &
- do_facet ost1 "$LCTL set_param fail_loc=0x0"
- pid2=$!
- wait $pid2
+
+ do_facet ost1 mount -t lustre $ost1dev $ost1mnt $ost1opts
rc2=$?
wait $pid
rc=$?
+ do_facet ost1 "$LCTL set_param fail_loc=0x0"
if [ $rc -eq 0 ] && [ $rc2 -ne 0 ]; then
echo "1st OST start succeed"
echo "2nd OST start failed with $rc2"
setup
chmod ugo+x $DIR || error "chmod 0 failed"
- set_conf_param_and_check mds \
+ set_conf_param_and_check mds1 \
"$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"0:0"
"$LCTL get_param -n llite.${FSNAME}*.root_squash" \
"0:0" ||
error "check llite root_squash failed!"
- set_conf_param_and_check mds \
+ set_conf_param_and_check mds1 \
"$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME.mdt.nosquash_nids" \
"NONE"
# set root squash UID:GID to RUNAS_ID
# root should be able to access only files owned by RUNAS_ID
#
- set_conf_param_and_check mds \
+ set_conf_param_and_check mds1 \
"$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
"$FSNAME.mdt.root_squash" \
"$RUNAS_ID:$RUNAS_ID"
local NIDLIST=$($LCTL list_nids all | tr '\n' ' ')
NIDLIST="2@gni $NIDLIST 192.168.0.[2,10]@tcp"
NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
- set_conf_param_and_check mds \
+ set_conf_param_and_check mds1 \
"$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
"$FSNAME-MDTall.mdt.nosquash_nids" \
"$NIDLIST"
df -h $MOUNT &
log "sleep 60 sec"
sleep 60
-#define OBD_FAIL_PTLRPC_LONG_REPL_UNLINK 0x50f
- do_facet client "$LCTL set_param fail_loc=0x50f fail_val=0"
+ #define OBD_FAIL_PTLRPC_LONG_REPL_UNLINK 0x50f
+ do_facet client "$LCTL set_param fail_loc=0x8000050f"
log "sleep 10 sec"
sleep 10
manual_umount_client --force || error "manual_umount_client failed"
# prepare MDT/OST, make OSC inactive for OST1
[ "$MDSCOUNT" -lt "2" ] && skip_env "$MDSCOUNT < 2, skipping" && return
- [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ [ $(facet_fstype mds2) == zfs ] && import_zpool mds2
do_facet mds2 "$TUNEFS --param mdc.active=0 $(mdsdevname 2)" ||
error "tunefs MDT2 failed"
start_mds || error "Unable to start MDT"
for i in 1023 2048
do
+ if ! combined_mgs_mds; then
+ stop_mgs || error "stopping MGS service failed"
+ format_mgs || error "formatting MGT failed"
+ fi
add mds1 $(mkfs_opts mds1 ${mdsdev}) --reformat $mdsdev \
$mdsvdev || exit 10
add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
}
run_test 55 "check lov_objid size"
-test_56() {
+test_56a() {
local server_version=$(lustre_version_code $SINGLEMDS)
local mds_journal_size_orig=$MDSJOURNALSIZE
local n
MDSJOURNALSIZE=$mds_journal_size_orig
reformat
}
-run_test 56 "check big OST indexes and out-of-index-order start"
+run_test 56a "check big OST indexes and out-of-index-order start"
+
+cleanup_56b() {
+ trap 0
+
+ umount_client $MOUNT -f || error "unmount client failed"
+ stop mds1
+ stop mds2
+ stop mds3
+ stopall
+ reformat
+}
+
+test_56b() {
+ [ $MDSCOUNT -lt 3 ] && skip "needs >= 3 MDTs" && return
+
+ trap cleanup_56b EXIT RETURN ERR
+ stopall
+
+ if ! combined_mgs_mds ; then
+ format_mgs
+ start_mgs
+ fi
+
+ add mds1 $(mkfs_opts mds1 $(mdsdevname 1)) --index=0 --reformat \
+ $(mdsdevname 1) $(mdsvdevname 1)
+ add mds2 $(mkfs_opts mds2 $(mdsdevname 2)) --index=1 --reformat \
+ $(mdsdevname 2) $(mdsvdevname 2)
+ add mds3 $(mkfs_opts mds3 $(mdsdevname 3)) --index=1000 --reformat \
+ $(mdsdevname 3) $(mdsvdevname 3)
+ format_ost 1
+ format_ost 2
+
+ start_mdt 1 || error "MDT 1 (idx 0) start failed"
+ start_mdt 2 || error "MDT 2 (idx 1) start failed"
+ start_mdt 3 || error "MDT 3 (idx 1000) start failed"
+ start_ost || error "Unable to start first ost"
+ start_ost2 || error "Unable to start second ost"
+
+ do_nodes $(comma_list $(mdts_nodes)) \
+ "$LCTL set_param mdt.*.enable_remote_dir=1 \
+ mdt.*.enable_remote_dir_gid=-1"
+
+ mount_client $MOUNT || error "Unable to mount client"
+
+ $LFS mkdir -c3 $MOUNT/$tdir || error "failed to make testdir"
+
+ echo "This is test file 1!" > $MOUNT/$tdir/$tfile.1 ||
+ error "failed to make test file 1"
+ echo "This is test file 2!" > $MOUNT/$tdir/$tfile.2 ||
+ error "failed to make test file 2"
+ echo "This is test file 1000!" > $MOUNT/$tdir/$tfile.1000 ||
+ error "failed to make test file 1000"
+
+ rm -rf $MOUNT/$tdir || error "failed to remove testdir"
+
+ $LFS mkdir -i1000 $MOUNT/$tdir.1000 ||
+ error "create remote dir at idx 1000 failed"
+
+ output=$($LFS df)
+ echo "=== START lfs df OUTPUT ==="
+ echo -e "$output"
+ echo "==== END lfs df OUTPUT ===="
+
+ mdtcnt=$(echo -e "$output" | grep $FSNAME-MDT | wc -l)
+ ostcnt=$(echo -e "$output" | grep $FSNAME-OST | wc -l)
+
+ echo "lfs df returned mdt count $mdtcnt and ost count $ostcnt"
+ [ $mdtcnt -eq 3 ] || error "lfs df returned wrong mdt count"
+ [ $ostcnt -eq 2 ] || error "lfs df returned wrong ost count"
+
+ echo "This is test file 1!" > $MOUNT/$tdir.1000/$tfile.1 ||
+ error "failed to make test file 1"
+ echo "This is test file 2!" > $MOUNT/$tdir.1000/$tfile.2 ||
+ error "failed to make test file 2"
+ echo "This is test file 1000!" > $MOUNT/$tdir.1000/$tfile.1000 ||
+ error "failed to make test file 1000"
+ rm -rf $MOUNT/$tdir.1000 || error "failed to remove remote_dir"
+
+ output=$($LFS mdts)
+ echo "=== START lfs mdts OUTPUT ==="
+ echo -e "$output"
+ echo "==== END lfs mdts OUTPUT ===="
+
+ echo -e "$output" | grep -v "MDTS:" | awk '{print $1}' |
+ sed 's/://g' > $TMP/mdts-actual.txt
+ sort $TMP/mdts-actual.txt -o $TMP/mdts-actual.txt
+
+ echo -e "0\n1\n1000" > $TMP/mdts-expected.txt
+
+ diff $TMP/mdts-expected.txt $TMP/mdts-actual.txt
+ result=$?
+
+ rm $TMP/mdts-expected.txt $TMP/mdts-actual.txt
+
+ [ $result -eq 0 ] || error "target_obd proc file is incorrect!"
+}
+run_test 56b "test target_obd correctness with nonconsecutive MDTs"
test_57a() { # bug 22656
do_rpc_nodes $(facet_active_host ost1) load_modules_local
}
test_58() { # bug 22658
+ combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
setup_noconfig
mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
createmany -o $DIR/$tdir/$tfile-%d 100
unmount_fstype $SINGLEMDS
# restart MDS with missing llog files
start_mds || error "unable to start MDS"
- do_facet mds "$LCTL set_param fail_loc=0"
+ do_facet $SINGLEMDS "$LCTL set_param fail_loc=0"
reformat
}
run_test 58 "missing llog files must not prevent MDT from mounting"
done
fi
+ combined_mgs_mds || stop_mgs || error "stopping MGS service failed"
setup_noconfig || error "setting up the filesystem failed"
client_up || error "starting client failed"
{ skip "Need MDS version at least 2.2.51"; return 0; }
echo "disable journal for mds"
- do_facet mds $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
+ do_facet mds1 $TUNE2FS -O ^has_journal $mdsdev || error "tune2fs failed"
start_mds && error "MDT start should fail"
echo "disable journal for ost"
do_facet ost1 $TUNE2FS -O ^has_journal $ostdev || error "tune2fs failed"
return
fi
- local inode_slab=$(do_facet $SINGLEMDS \
- "awk '/ldiskfs_inode_cache/ { print \\\$5 }' /proc/slabinfo")
+ do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ldiskfs
+ local inode_slab=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
+ awk '/ldiskfs_inode_cache/ { print $5 / $6 }')
if [ -z "$inode_slab" ]; then
skip "ldiskfs module has not been loaded"
return
fi
- echo "$inode_slab ldisk inodes per page"
- [ "$inode_slab" -ge "3" ] ||
- error "ldisk inode size is too big, $inode_slab objs per page"
- return
+ echo "$inode_slab ldiskfs inodes per page"
+ [ "${inode_slab%.*}" -ge "3" ] && return 0
+
+ # If kmalloc-128 is also 1 per page - this is a debug kernel
+ # and so this is not an error.
+ local kmalloc128=$(do_facet $SINGLEMDS "cat /proc/slabinfo" |
+ awk '/^(kmalloc|size)-128 / { print $5 / $6 }')
+ # 32 128-byte chunks in 4k
+ [ "${kmalloc128%.*}" -lt "32" ] ||
+ error "ldiskfs inode too big, only $inode_slab objs/page, " \
+ "kmalloc128 = $kmalloc128 objs/page"
}
-run_test 63 "Verify each page can at least hold 3 ldisk inodes"
+run_test 63 "Verify each page can at least hold 3 ldiskfs inodes"
test_64() {
start_mds || error "unable to start MDS"
mount_client $MOUNT || error "Unable to mount client"
stop_ost2 || error "Unable to stop second ost"
echo "$LFS df"
- $LFS df --lazy || error "lfs df failed"
+ $LFS df --lazy
umount_client $MOUNT -f || error “unmount $MOUNT failed”
cleanup_nocli || error "cleanup_nocli failed with $?"
#writeconf to remove all ost2 traces for subsequent tests
local ostdev=$(ostdevname 1)
local cmd="$E2FSCK -fnvd $mdsdev"
local fn=3
+ local add_options
[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
skip "ldiskfs only test" && return
+ if combined_mgs_mds; then
+ add_options='--reformat'
+ else
+ add_options='--reformat --replace'
+ fi
+
#tune MDT with "-O extents"
for num in $(seq $MDSCOUNT); do
add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
- --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
+ $add_options $(mdsdevname $num) $(mdsvdevname $num) ||
error "add mds $num failed"
do_facet mds${num} "$TUNE2FS -O extents $(mdsdevname $num)" ||
error "$TUNE2FS failed on mds${num}"
done
- add ost1 $(mkfs_opts ost1 $ostdev) --reformat $ostdev ||
+ add ost1 $(mkfs_opts ost1 $ostdev) $add_options $ostdev ||
error "add $ostdev failed"
- start_mgsmds || error "start mds failed"
+ start_mds || error "start mds failed"
start_ost || error "start ost failed"
mount_client $MOUNT || error "mount client failed"
test_77() { # LU-3445
local server_version=$(lustre_version_code $SINGLEMDS)
-
- [[ $server_version -ge $(version_code 2.2.60) ]] &&
- [[ $server_version -le $(version_code 2.4.0) ]] &&
- skip "Need MDS version < 2.2.60 or > 2.4.0" && return
+ [[ $server_version -ge $(version_code 2.8.55) ]] ||
+ { skip "Need MDS version 2.8.55+ "; return; }
if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
error "start fs2mds failed"
mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
- [[ $mgsnid = *,* ]] || mgsnid+=",$mgsnid"
+ mgsnid="$mgsnid,$mgsnid:$mgsnid"
add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
--failnode=$failnid --fsname=$fsname \
}
run_test 81 "sparse OST indexing"
-# Wait OSTs to be active on both client and MDT side.
-wait_osts_up() {
- local cmd="$LCTL get_param -n lov.$FSNAME-clilov-*.target_obd |
- awk 'BEGIN {c = 0} /ACTIVE/{c += 1} END {printf \\\"%d\\\", c}'"
- wait_update $HOSTNAME "eval $cmd" $OSTCOUNT ||
- error "wait_update OSTs up on client failed"
-
- cmd="$LCTL get_param -n lod.$FSNAME-MDT*-*.target_obd | sort -u |
- awk 'BEGIN {c = 0} /ACTIVE/{c += 1} END {printf \\\"%d\\\", c}'"
- wait_update_facet $SINGLEMDS "eval $cmd" $OSTCOUNT ||
- error "wait_update OSTs up on MDT failed"
-}
-
# Here we exercise the stripe placement functionality on a file system that
# has formatted the OST with a random index. With the file system the following
# functionality is tested:
wait_update $HOSTNAME "$LCTL get_param -n lov.$FSNAME-*.pools.$TESTNAME|
sort -u | tr '\n' ' ' " "$ost_targets_uuid" ||
error "wait_update $ost_pool failed"
- pool_list $ost_pool || error "list OST pool $ost_pool failed"
+ [[ -z $(list_pool $ost_pool) ]] &&
+ error "list OST pool $ost_pool failed"
# If [--pool|-p <pool_name>] is set with [--ost-list|-o <ost_indices>],
# then the OSTs must be the members of the pool.
}
test_86() {
+ local server_version=$(lustre_version_code $SINGLEMDS)
[ "$(facet_fstype ost1)" = "zfs" ] &&
skip "LU-6442: no such mkfs params for ZFS OSTs" && return
+ [[ $server_version -ge $(version_code 2.7.56) ]] ||
+ { skip "Need server version newer than 2.7.55"; return 0; }
local OST_OPTS="$(mkfs_opts ost1 $(ostdevname 1)) \
--reformat $(ostdevname 1) $(ostvdevname 1)"
}
run_test 97 "ldev returns correct ouput when querying based on role"
+test_98()
+{
+ local mountopt
+ local temp=$MDS_MOUNT_OPTS
+
+ setup
+ check_mount || error "mount failed"
+ mountopt="user_xattr"
+ for ((x = 1; x <= 400; x++)); do
+ mountopt="$mountopt,user_xattr"
+ done
+ remount_client $mountopt $MOUNT 2>&1 | grep "too long" ||
+ error "Buffer overflow check failed"
+ cleanup || error "cleanup failed"
+}
+run_test 98 "Buffer-overflow check while parsing mount_opts"
+
+test_99()
+{
+ [[ $(facet_fstype ost1) != ldiskfs ]] &&
+ { skip "Only applicable to ldiskfs-based OSTs" && return; }
+ [[ $(lustre_version_code ost1) -ge $(version_code 2.8.57) ]] ||
+ { skip "Need OST version at least 2.8.57" && return 0; }
+
+ local ost_opts="$(mkfs_opts ost1 $(ostdevname 1)) \
+ --reformat $(ostdevname 1) $(ostvdevname 1)"
+ do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" &&
+ skip "meta_bg already set" && return
+
+ local opts=ost_opts
+ if [[ ${!opts} != *mkfsoptions* ]]; then
+ eval opts=\"${!opts} \
+ --mkfsoptions='\\\"-O ^resize_inode,meta_bg\\\"'\"
+ else
+ local val=${!opts//--mkfsoptions=\\\"/ \
+ --mkfsoptions=\\\"-O ^resize_inode,meta_bg }
+ eval opts='${val}'
+ fi
+
+ echo "params: $opts"
+
+ add ost1 $opts || error "add ost1 failed with new params"
+
+ do_facet ost1 $DEBUGFS -c -R stats `ostdevname 1` | grep "meta_bg" ||
+ error "meta_bg is not set"
+
+ return 0
+}
+run_test 99 "Adding meta_bg option"
+
+test_100() {
+ reformat
+ start_mds || error "MDS start failed"
+ start_ost || error "unable to start OST"
+ mount_client $MOUNT || error "client start failed"
+ check_mount || error "check_mount failed"
+
+ # Desired output
+ # MGS:
+ # 0@lo
+ # lustre-MDT0000:
+ # 0@lo
+ # lustre-OST0000:
+ # 0@lo
+ do_facet mgs 'lshowmount -v' | awk 'BEGIN {NR == 0; rc=1} /MGS:/ {rc=0}
+ END {exit rc}' || error "lshowmount have no output MGS"
+
+ do_facet mds1 'lshowmount -v' | awk 'BEGIN {NR == 2; rc=1} /-MDT0000:/
+ {rc=0} END {exit rc}' || error "lshowmount have no output MDT0"
+
+ do_facet ost1 'lshowmount -v' | awk 'BEGIN {NR == 4; rc=1} /-OST0000:/
+ {rc=0} END {exit rc}' || error "lshowmount have no output OST0"
+
+ cleanup || error "cleanup failed with $?"
+}
+run_test 100 "check lshowmount lists MGS, MDT, OST and 0@lo"
+
+test_101() {
+ local createmany_oid
+ local dev=$FSNAME-OST0000-osc-MDT0000
+ setup
+
+ createmany -o $DIR1/$tfile-%d 50000 &
+ createmany_oid=$!
+ # MDT->OST reconnection causes MDT<->OST last_id synchornisation
+ # via osp_precreate_cleanup_orphans.
+ for ((i = 0; i < 100; i++)); do
+ for ((k = 0; k < 10; k++)); do
+ do_facet $SINGLEMDS "$LCTL --device $dev deactivate;" \
+ "$LCTL --device $dev activate"
+ done
+
+ ls -asl $MOUNT | grep '???' &&
+ (kill -9 $createmany_oid &>/dev/null; \
+ error "File hasn't object on OST")
+
+ kill -s 0 $createmany_oid || break
+ done
+ wait $createmany_oid
+ cleanup
+}
+run_test 101 "Race MDT->OST reconnection with create"
+
+test_102() {
+ cleanup || error "cleanup failed with $?"
+
+ local mds1dev=$(mdsdevname 1)
+ local mds1mnt=$(facet_mntpt mds1)
+ local mds1fstype=$(facet_fstype mds1)
+ local mds1opts=$MDS_MOUNT_OPTS
+
+ if [ $mds1fstype == ldiskfs ] &&
+ ! do_facet mds1 test -b $mds1dev; then
+ mds1opts=$(csa_add "$mds1opts" -o loop)
+ fi
+ if [[ $mds1fstype == zfs ]]; then
+ import_zpool mds1 || return ${PIPESTATUS[0]}
+ fi
+
+ # unload all and only load libcfs to allow fail_loc setting
+ do_facet mds1 lustre_rmmod || error "unable to unload modules"
+ do_facet mds1 modprobe libcfs || error "libcfs not loaded"
+ do_facet mds1 lsmod \| grep libcfs || error "libcfs not loaded"
+
+ #define OBD_FAIL_OBDCLASS_MODULE_LOAD 0x60a
+ do_facet mds1 "$LCTL set_param fail_loc=0x8000060a"
+
+ do_facet mds1 $MOUNT_CMD $mds1dev $mds1mnt $mds1opts &&
+ error "mdt start must fail"
+ do_facet mds1 lsmod \| grep obdclass && error "obdclass must not load"
+
+ do_facet mds1 "$LCTL set_param fail_loc=0x0"
+
+ do_facet mds1 $MOUNT_CMD $mds1dev $mds1mnt $mds1opts ||
+ error "mdt start must not fail"
+
+ cleanup || error "cleanup failed with $?"
+}
+run_test 102 "obdclass module cleanup upon error"
+
+test_renamefs() {
+ local newname=$1
+
+ echo "rename $FSNAME to $newname"
+
+ if [ ! combined_mgs_mds ]; then
+ local facet=$(mgsdevname)
+
+ do_facet mgs \
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
+ error "(7) Fail to rename MGS"
+ if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ reimport_zpool mgs $newname-mgs
+ fi
+ fi
+
+ for num in $(seq $MDSCOUNT); do
+ local facet=$(mdsdevname $num)
+
+ do_facet mds${num} \
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
+ error "(8) Fail to rename MDT $num"
+ if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ reimport_zpool mds${num} $newname-mdt${num}
+ fi
+ done
+
+ for num in $(seq $OSTCOUNT); do
+ local facet=$(ostdevname $num)
+
+ do_facet ost${num} \
+ "$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
+ error "(9) Fail to rename OST $num"
+ if [ "$(facet_fstype $facet)" = "zfs" ]; then
+ reimport_zpool ost${num} $newname-ost${num}
+ fi
+ done
+}
+
+test_103_set_pool() {
+ local pname=$1
+ local ost_x=$2
+
+ do_facet mgs $LCTL pool_add $FSNAME.$pname ${FSNAME}-$ost_x ||
+ error "Fail to add $ost_x to $FSNAME.$pname"
+ wait_update $HOSTNAME \
+ "lctl get_param -n lov.$FSNAME-clilov-*.pools.$pname |
+ grep $ost_x" "$FSNAME-${ost_x}_UUID" ||
+ error "$ost_x is NOT in pool $FSNAME.$pname"
+}
+
+test_103_check_pool() {
+ local save_fsname=$1
+ local errno=$2
+
+ stat $DIR/$tdir/test-framework.sh ||
+ error "($errno) Fail to stat"
+ do_facet mgs $LCTL pool_list $FSNAME.pool1 ||
+ error "($errno) Fail to list $FSNAME.pool1"
+ do_facet mgs $LCTL pool_list $FSNAME.$save_fsname ||
+ error "($errno) Fail to list $FSNAME.$save_fsname"
+ do_facet mgs $LCTL pool_list $FSNAME.$save_fsname |
+ grep ${FSNAME}-OST0000 ||
+ error "($errno) List $FSNAME.$save_fsname is invalid"
+
+ local pname=$($LFS getstripe --pool $DIR/$tdir/d0)
+ [ "$pname" = "$save_fsname" ] ||
+ error "($errno) Unexpected pool name $pname"
+}
+
+test_103() {
+ check_mount_and_prep
+ rm -rf $DIR/$tdir
+ mkdir $DIR/$tdir || error "(1) Fail to mkdir $DIR/$tdir"
+ cp $LUSTRE/tests/test-framework.sh $DIR/$tdir ||
+ error "(2) Fail to copy test-framework.sh"
+
+ do_facet mgs $LCTL pool_new $FSNAME.pool1 ||
+ error "(3) Fail to create $FSNAME.pool1"
+ # name the pool name as the fsname
+ do_facet mgs $LCTL pool_new $FSNAME.$FSNAME ||
+ error "(4) Fail to create $FSNAME.$FSNAME"
+
+ test_103_set_pool $FSNAME OST0000
+
+ $SETSTRIPE -p $FSNAME $DIR/$tdir/d0 ||
+ error "(6) Fail to setstripe on $DIR/$tdir/d0"
+
+ KEEP_ZPOOL=true
+ stopall
+
+ test_renamefs mylustre
+
+ local save_fsname=$FSNAME
+ FSNAME="mylustre"
+ setupall
+
+ test_103_check_pool $save_fsname 7
+
+ if [ $OSTCOUNT -ge 2 ]; then
+ test_103_set_pool $save_fsname OST0001
+ fi
+
+ $SETSTRIPE -p $save_fsname $DIR/$tdir/f0 ||
+ error "(16) Fail to setstripe on $DIR/$tdir/f0"
+
+ stopall
+
+ test_renamefs tfs
+
+ FSNAME="tfs"
+ setupall
+
+ test_103_check_pool $save_fsname 17
+
+ stopall
+
+ test_renamefs $save_fsname
+
+ FSNAME=$save_fsname
+ setupall
+ KEEP_ZPOOL=false
+}
+run_test 103 "rename filesystem name"
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff