[ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
log "use file $MDSDEV with MIN=$MIN"
- [ -z "$OK" ] && skip "$MDSDEV too small for ${MIN}kB MDS" && return
+ [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
echo "mount mds with large journal..."
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
test_24b() {
if [ -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
run_test 28 "permanent parameter setting"
test_29() {
- [ "$OSTCOUNT" -lt "2" ] && skip "$OSTCOUNT < 2, skipping" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
setup > /dev/null 2>&1
start_ost2
sleep 10
test_32a() {
# this test is totally useless on a client-only system
- [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+ client_only && skip "client only testing" && return 0
[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
- [ -z "$TUNEFS" ] && skip "No tunefs" && return 0
+ [ -z "$TUNEFS" ] && skip_env "No tunefs" && return 0
local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
- [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
+ [ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
local tmpdir=$TMP/conf32a
mkdir -p $tmpdir
tar xjvf $DISK1_8 -C $tmpdir || \
- { skip "Cannot untar $DISK1_8" && return 0; }
+ { skip_env "Cannot untar $DISK1_8" && return 0; }
load_modules
$LCTL set_param debug=$PTLDEBUG
test_32b() {
# this test is totally useless on a client-only system
- [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+ client_only && skip "client only testing" && return 0
[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
- [ -z "$TUNEFS" ] && skip "No tunefs" && return
+ [ -z "$TUNEFS" ] && skip_env "No tunefs" && return
local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
- [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
+ [ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
local tmpdir=$TMP/conf32b
mkdir -p $tmpdir
tar xjvf $DISK1_8 -C $tmpdir || \
- { skip "Cannot untar $DISK1_8" && return ; }
+ { skip_env "Cannot untar $DISK1_8" && return ; }
load_modules
$LCTL set_param debug=$PTLDEBUG
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
- skip "mixed loopback and real device not working" && return
+ skip_env "mixed loopback and real device not working" && return
fi
- [ $OSTCOUNT -lt 2 ] && skip "skipping test for single OST" && return
+ [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
{ skip "remote OST" && return 0; }
run_test 36 "df report consistency on OSTs with different block size"
test_37() {
- [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+ client_only && skip "client only testing" && return 0
LOCAL_MDSDEV="$TMP/mdt.img"
SYM_MDSDEV="$TMP/sym_mdt.img"
run_test 42 "invalid config param should not prevent client from mounting"
test_43() {
- [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip "run as root"
+ [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
setup
chmod ugo+x $DIR || error "chmod 0 failed"
set_and_check mds \
cleanup_46a() {
trap 0
local rc=0
- local count=5
+ local count=$1
umount_client $MOUNT2 || rc=$?
umount_client $MOUNT || rc=$?
}
test_46a() {
- [ $OSTCOUNT -lt 5 ] && skip "skipping test for too few OSTs" && return
+ echo "Testing with $OSTCOUNT OSTs"
reformat
start_mds || return 1
#first client should see only one ost
wait_osc_import_state mds ost FULL
#start_client
mount_client $MOUNT || return 3
- trap cleanup_46a EXIT ERR
-
- start_ost2 || return 4
- start ost3 `ostdevname 3` $OST_MOUNT_OPTS || return 5
- start ost4 `ostdevname 4` $OST_MOUNT_OPTS || return 6
- start ost5 `ostdevname 5` $OST_MOUNT_OPTS || return 7
- # wait until ost2-5 is sync
- # ping_interval + 1
- wait_osc_import_state mds ost2 FULL
- wait_osc_import_state mds ost3 FULL
- wait_osc_import_state mds ost4 FULL
- wait_osc_import_state mds ost5 FULL
+ trap "cleanup_46a $OSTCOUNT" EXIT ERR
+
+ local i
+ for (( i=2; i<=$OSTCOUNT; i++ )); do
+ start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
+ done
+
+ # wait until osts in sync
+ for (( i=2; i<=$OSTCOUNT; i++ )); do
+ wait_osc_import_state mds ost$i FULL
+ done
+
+
#second client see all ost's
mount_client $MOUNT2 || return 8
# will be deadlock
stat $MOUNT/widestripe || return 12
- cleanup_46a || { echo "cleanup_46a failed!" && return 13; }
+ cleanup_46a $OSTCOUNT || { echo "cleanup_46a failed!" && return 13; }
return 0
}
run_test 46a "handle ost additional - wide striped file"
}
run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
+copy_files_xattrs()
+{
+ local node=$1
+ local dest=$2
+ local xattrs=$3
+ shift 3
+
+ do_node $node mkdir -p $dest
+ [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+ do_node $node 'tar cf - '$@' | tar xf - -C '$dest';
+ [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+ [ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
+
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
+ [ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
+}
+
+diff_files_xattrs()
+{
+ local node=$1
+ local backup=$2
+ local xattrs=$3
+ shift 3
+
+ local backup2=${TMP}/backup2
+
+ do_node $node mkdir -p $backup2
+ [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+ do_node $node 'tar cf - '$@' | tar xf - -C '$backup2';
+ [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+ [ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
+
+ do_node $node "diff -rq $backup $backup2"
+ [ $? -eq 0 ] || { error "contents differ"; return 3; }
+
+ local xattrs2=${TMP}/xattrs2
+ do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
+ [ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
+
+ do_node $node "diff $xattrs $xattrs2"
+ [ $? -eq 0 ] || { error "xattrs differ"; return 5; }
+
+ do_node $node "rm -rf $backup2 $xattrs2"
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 6; }
+}
+
+test_52() {
+ start_mds
+ [ $? -eq 0 ] || { error "Unable to start MDS"; return 1; }
+ start_ost
+ [ $? -eq 0 ] || { error "Unable to start OST1"; return 2; }
+ mount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to mount client"; return 3; }
+
+ local nrfiles=8
+ local ost1mnt=${MOUNT%/*}/ost1
+ local ost1node=$(facet_active_host ost1)
+ local ost1tmp=$TMP/conf52
+
+ mkdir -p $DIR/$tdir
+ [ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
+ touch $TMP/modified_first
+ [ $? -eq 0 ] || { error "Unable to create temporary file"; return 5; }
+ do_node $ost1node "mkdir -p $ost1tmp && touch $ost1tmp/modified_first"
+ [ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
+ sleep 1
+
+ $LFS setstripe $DIR/$tdir -c -1 -s 1M
+ [ $? -eq 0 ] || { error "lfs setstripe failed"; return 7; }
+
+ for (( i=0; i < nrfiles; i++ )); do
+ multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c
+ [ $? -eq 0 ] || { error "multiop failed"; return 8; }
+ echo -n .
+ done
+ echo
+
+ # backup files
+ echo backup files to $TMP/files
+ local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
+ copy_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+ [ $? -eq 0 ] || { error "Unable to copy files"; return 9; }
+
+ umount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to umount client"; return 10; }
+ stop_ost
+ [ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
+
+ echo mount ost1 as ldiskfs
+ do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
+ [ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
+
+ # backup objects
+ echo backup objects to $ost1tmp/objects
+ local objects=$(do_node $ost1node 'find '$ost1mnt'/O/0 -type f -size +0'\
+ '-newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
+ copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+ [ $? -eq 0 ] || { error "Unable to copy objects"; return 13; }
+
+ # move objects to lost+found
+ do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
+ [ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
+
+ # recover objects
+ do_node $ost1node "ll_recover_lost_found_objs -d $ost1mnt/lost+found"
+ [ $? -eq 0 ] || { error "ll_recover_lost_found_objs failed"; return 15; }
+
+ # compare restored objects against saved ones
+ diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+ [ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
+
+ do_node $ost1node "umount $ost1_dev"
+ [ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
+
+ start_ost
+ [ $? -eq 0 ] || { error "Unable to start ost1"; return 18; }
+ mount_client $MOUNT
+ [ $? -eq 0 ] || { error "Unable to mount client"; return 19; }
+
+ # compare files
+ diff_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+ [ $? -eq 0 ] || { error "Unable to diff files"; return 20; }
+
+ rm -rf $TMP/files $TMP/file_xattrs
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 21; }
+ do_node $ost1node "rm -rf $ost1tmp"
+ [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 22; }
+ cleanup
+}
+run_test 52 "check recovering objects from lost+found"
+
cleanup_gss
equals_msg `basename $0`: test complete
[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true
git://git.whamcloud.com / fs / lustre-release.git / blobdiff