#!/bin/bash
-# -*- mode: Bash; tab-width: 4; indent-tabs-mode: t; -*-
-# vim:autoindent:shiftwidth=4:tabstop=4:
# FIXME - there is no reason to use all of these different
# return codes, espcially when most of them are mapped to something
ONLY=${ONLY:-"$*"}
# bug number for skipped test:
-# 15977
ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
fi
+# LU-2059
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT 5d 19b 21b 27a"
+
+
SRCDIR=`dirname $0`
PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
+export MULTIOP=${MULTIOP:-multiop}
. $LUSTRE/tests/test-framework.sh
init_test_env $@
STORED_MDSSIZE=$MDSSIZE
fi
+# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
+if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
+ LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
+fi
+
init_logging
#
}
cleanup() {
- umount_client $MOUNT || return 200
+ umount_client $MOUNT || return 200
cleanup_nocli || return $?
}
# cleanup may return an error from the failed
# disconnects; for now I'll consider this successful
# if all the modules have unloaded.
- umount -d $MOUNT &
+ umount -d $MOUNT &
UMOUNT_PID=$!
sleep 6
echo "killing umount"
while [ "$WAIT" -ne "$MAX_WAIT" ]; do
sleep $sleep
grep -q $MOUNT" " /etc/mtab || break
- echo "Waiting /etc/mtab updated ... "
+ echo "Waiting /etc/mtab updated ... "
WAIT=$(( WAIT + sleep))
done
[ "$WAIT" -eq "$MAX_WAIT" ] && error "/etc/mtab is not updated in $WAIT secs"
#
test_17() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
setup
check_mount || return 41
cleanup || return $?
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
test_18() {
- [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
echo "mount mds with large journal..."
- local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
- local opts="--mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
-
- if combined_mgs_mds ; then
- MDS_MKFS_OPTS="--mgs $opts"
- else
- MDS_MKFS_OPTS="--mgsnode=$MGSNID $opts"
- fi
+ local OLD_MDSSIZE=$MDSSIZE
+ MDSSIZE=$myMDSSIZE
reformat_and_config
echo "mount lustre system..."
cleanup || return $?
- MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
- reformat_and_config
+ MDSSIZE=$OLD_MDSSIZE
+ reformat_and_config
}
run_test 18 "check mkfs creates large journals"
stop_mgs
#writeconf to remove all ost2 traces for subsequent tests
writeconf
+ start_mgs
}
run_test 21d "start mgs then ost and then mds"
sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
fi
mount_client $MOUNT
+ wait_osc_import_state mds ost FULL
+ wait_osc_import_state client ost FULL
check_mount || return 41
pass
stop $SINGLEMDS
# force down client so that recovering mds waits for reconnect
local running=$(grep -c $MOUNT /proc/mounts) || true
- if [ $running -ne 0 ]; then
- echo "Stopping client $MOUNT (opts: -f)"
- umount -f $MOUNT
- fi
+ if [ $running -ne 0 ]; then
+ echo "Stopping client $MOUNT (opts: -f)"
+ umount -f $MOUNT
+ fi
# enter recovery on mds
start_mds
ps -ef | grep mount
# "ctrl-c" sends SIGINT but it usually (in script) does not work on child process
# SIGTERM works but it does not spread to offspring processses
- kill -s SIGTERM $MOUNT_PID
- kill -s SIGTERM $MOUNT_LUSTRE_PID
+ kill -s TERM $MOUNT_PID
+ kill -s TERM $MOUNT_LUSTRE_PID
# we can not wait $MOUNT_PID because it is not a child of this shell
local PID1
local PID2
fs2mds_HOST=$mds_HOST
fs2ost_HOST=$ost_HOST
+MDSDEV1_2=$fs2mds_DEV
+OSTDEV1_2=$fs2ost_DEV
+OSTDEV2_2=$fs3ost_DEV
+
cleanup_24a() {
trap 0
echo "umount $MOUNT2 ..."
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
- local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
- local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
# test 8-char fsname as well
local FSNAME2=test1234
- add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --nomgs --mgsnode=$MGSNID --reformat $fs2mdsdev || exit 10
+ add fs2mds $(mkfs_opts mds1) --nomgs --mgsnode=$MGSNID \
+ --fsname=${FSNAME2} --reformat $fs2mdsdev $fs2mdsvdev || exit 10
- add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2ostdev || exit 10
+ add fs2ost $(mkfs_opts ost1) --fsname=${FSNAME2} --reformat \
+ $fs2ostdev $fs2ostvdev || exit 10
setup
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
facet_failover fs2mds
facet_failover fs2ost
df
- umount_client $MOUNT
+ umount_client $MOUNT
# the MDS must remain up until last MDT
stop_mds
MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
skip_env "mixed loopback and real device not working" && return
fi
- local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
- add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
+ add fs2mds $(mkfs_opts mds1) --mgs --fsname=${FSNAME}2 --reformat \
+ $fs2mdsdev $fs2mdsvdev || exit 10
setup
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && return 2
cleanup || return 6
lctl get_param -n devices
DEVS=$(lctl get_param -n devices | egrep -v MG | wc -l)
[ $DEVS -gt 0 ] && return 2
+ # start mds to drop writeconf setting
+ start_mds || return 3
+ stop_mds || return 4
unload_modules_conf || return $?
}
run_test 26 "MDT startup failure cleans LOV (should return errs)"
-set_and_check() {
- local myfacet=$1
- local TEST=$2
- local PARAM=$3
- local ORIG=$(do_facet $myfacet "$TEST")
- if [ $# -gt 3 ]; then
- local FINAL=$4
- else
- local -i FINAL
- FINAL=$(($ORIG + 5))
- fi
- echo "Setting $PARAM from $ORIG to $FINAL"
- do_facet $SINGLEMDS "$LCTL conf_param $PARAM='$FINAL'" || error conf_param failed
-
- wait_update $(facet_host $myfacet) "$TEST" "$FINAL" || error check failed!
-}
-
test_27a() {
start_ost || return 1
start_mds || return 2
echo "Requeue thread should have started: "
ps -e | grep ll_cfg_requeue
- set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
+ set_conf_param_and_check ost1 \
+ "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" \
+ "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
cleanup_nocli
}
run_test 27a "Reacquire MGS lock if OST started first"
local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
facet_failover $SINGLEMDS
- set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
- set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
+ set_conf_param_and_check $SINGLEMDS \
+ "lctl get_param -n mdt.$device.identity_acquire_expire" \
+ "$device.mdt.identity_acquire_expire" || return 3
+ set_conf_param_and_check client \
+ "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight"\
+ "$device.mdc.max_rpcs_in_flight" || return 4
check_mount
cleanup
}
PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
ORIG=$($TEST)
FINAL=$(($ORIG + 1))
- set_and_check client "$TEST" "$PARAM" $FINAL || return 3
+ set_conf_param_and_check client "$TEST" "$PARAM" $FINAL || return 3
FINAL=$(($FINAL + 1))
- set_and_check client "$TEST" "$PARAM" $FINAL || return 4
- umount_client $MOUNT || return 200
+ set_conf_param_and_check client "$TEST" "$PARAM" $FINAL || return 4
+ umount_client $MOUNT || return 200
mount_client $MOUNT
RESULT=$($TEST)
if [ $RESULT -ne $FINAL ]; then
else
echo "New config success: got $RESULT"
fi
- set_and_check client "$TEST" "$PARAM" $ORIG || return 5
+ set_conf_param_and_check client "$TEST" "$PARAM" $ORIG || return 5
cleanup
}
run_test 28 "permanent parameter setting"
ACTV=$(lctl get_param -n $PROC_ACT)
DEAC=$((1 - $ACTV))
- set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
+ set_conf_param_and_check client \
+ "lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
# also check ost_server_uuid status
RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV)
if [ -z "$RESULT" ]; then
echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
done
- # quotacheck should not fail immediately after deactivate
- [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
-
# test new client starts deactivated
- umount_client $MOUNT || return 200
+ umount_client $MOUNT || return 200
mount_client $MOUNT
RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
if [ -z "$RESULT" ]; then
echo "New client success: got $RESULT"
fi
- # quotacheck should not fail after umount/mount operation
- [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
-
# make sure it reactivates
- set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
+ set_conf_param_and_check client \
+ "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
- umount_client $MOUNT
+ umount_client $MOUNT
stop_ost2
cleanup_nocli
#writeconf to remove all ost2 traces for subsequent tests
ORIG=$($TEST)
LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
for i in ${LIST[@]}; do
- set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
+ set_conf_param_and_check client "$TEST" \
+ "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
done
# make sure client restart still works
- umount_client $MOUNT
+ umount_client $MOUNT
mount_client $MOUNT || return 4
[ "$($TEST)" -ne "$i" ] && error "Param didn't stick across restart $($TEST) != $i"
pass
echo "Using fake nid $NEW"
TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
- set_and_check client "$TEST" "$FSNAME-OST0000.failover.node" $NEW || error "didn't add failover nid $NEW"
+ set_conf_param_and_check client "$TEST" \
+ "$FSNAME-OST0000.failover.node" $NEW ||
+ error "didn't add failover nid $NEW"
NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
echo $NIDS
NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
}
test_32a() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
client_only && skip "client only testing" && return 0
[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
[ -z "$TUNEFS" ] && skip_env "No tunefs" && return 0
{ skip_env "Cannot untar $DISK1_8" && return 0; }
load_modules
- $LCTL set_param debug=$PTLDEBUG
+ $LCTL set_param debug="$PTLDEBUG"
$TUNEFS $tmpdir/mds || error "tunefs failed"
run_test 32a "Upgrade from 1.8 (not live)"
test_32b() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
client_only && skip "client only testing" && return 0
[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
[ -z "$TUNEFS" ] && skip_env "No tunefs" && return
{ skip_env "Cannot untar $DISK1_8" && return ; }
load_modules
- $LCTL set_param debug="config"
+ $LCTL set_param debug="+config"
local NEWNAME=lustre
# writeconf will cause servers to register with their current nids
- $TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
+ $TUNEFS --writeconf --erase-params \
+ --param mdt.identity_upcall=$L_GETIDENTITY \
+ --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
combined_mgs_mds || stop mgs
start32 mds1 $tmpdir/mds "-o loop" && \
echo MDS uuid $UUID
[ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
- $TUNEFS --mgsnode=$HOSTNAME --writeconf --fsname=$NEWNAME $tmpdir/ost1 ||\
+ $TUNEFS --writeconf --erase-params \
+ --mgsnode=$HOSTNAME --fsname=$NEWNAME $tmpdir/ost1 ||\
error "tunefs failed"
start32 ost1 $tmpdir/ost1 "-o loop" || return 5
UUID=$($LCTL get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
local rc=0
local FSNAME2=test-123
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ local mkfsoptions
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
skip_env "mixed loopback and real device not working" && return
fi
- combined_mgs_mds || mkfs_opts="$mkfs_opts --nomgs"
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
- local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
- local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
- add fs2mds $MDS_MKFS_OPTS --mkfsoptions='\"-J size=8\"' --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
- add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
+ if [ $(facet_fstype mds1) == ldiskfs ]; then
+ mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
+ fi
+
+ add fs2mds $(mkfs_opts mds1) --fsname=${FSNAME2} --reformat \
+ $mkfsoptions $fs2mdsdev $fs2mdsvdev || exit 10
+ add fs2ost $(mkfs_opts ost1) --mgsnode=$MGSNID --fsname=${FSNAME2} \
+ --index=8191 --reformat $fs2ostdev $fs2ostvdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
umount -d $MOUNT2
stop fs2ost -f
stop fs2mds -f
- rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev
cleanup_nocli || rc=6
return $rc
}
touch $DIR/$tfile || return 1
stop_mds --force || return 2
- manual_umount_client --force
+ manual_umount_client --force
rc=$?
if [ $rc -ne 0 ]; then
error "mtab after failed umount - rc $rc"
touch $DIR/$tfile || return 1
stop_ost --force || return 2
- manual_umount_client --force
+ manual_umount_client --force
rc=$?
if [ $rc -ne 0 ]; then
error "mtab after failed umount - rc $rc"
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
+ do_facet mgs $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
FAKENID="127.0.0.2"
local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" | \
awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet $SINGLEMDS "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
+ do_facet mgs "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
return 1
local at_max_saved=0
- # adaptive timeouts may prevent seeing the issue
+ # adaptive timeouts may prevent seeing the issue
if at_is_enabled; then
at_max_saved=$(at_max_get mds)
at_max_set 0 mds client
fi
- mkdir -p $MOUNT/testdir
- touch $MOUNT/testdir/test
+ mkdir -p $MOUNT/$tdir
log "Injecting EBUSY on MDS"
# Setting OBD_FAIL_MDS_RESEND=0x136
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000136" || return 2
- log "Stat on a test file"
- stat $MOUNT/testdir/test
+ $LCTL set_param mdc.${FSNAME}*.stats=clear
+
+ log "Creating a test file and stat it"
+ touch $MOUNT/$tdir/$tfile
+ stat $MOUNT/$tdir/$tfile
log "Stop injecting EBUSY on MDS"
do_facet $SINGLEMDS "$LCTL set_param fail_loc=0" || return 3
- rm -f $MOUNT/testdir/test
+ rm -f $MOUNT/$tdir/$tfile
log "done"
# restore adaptive timeout
$LCTL dk $TMP/lustre-log-$TESTNAME.log
+ CONNCNT=`$LCTL get_param mdc.${FSNAME}*.stats | awk '/mds_connect/{print $2}'`
+
# retrieve from the log if the client has ever tried to
# contact the fake server after the loss of connection
FAILCONN=`awk "BEGIN {ret = 0;}
log "ERROR: The client tried to reconnect to the failover server while the primary was busy" && \
return 5
- cleanup
+ # LU-290
+ # When OBD_FAIL_MDS_RESEND is hit, we sleep for 2 * obd_timeout
+ # Reconnects are supposed to be rate limited to one every 5s
+ [ $CONNCNT -gt $((2 * $TIMEOUT / 5 + 1)) ] && \
+ log "ERROR: Too many reconnects $CONNCNT" && \
+ return 6
+
+ cleanup
# remove nid settings
writeconf
}
skip_env "mixed loopback and real device not working" && return
fi
- local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
- local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
- local fs3ostdev=${fs3ost_DEV:-$(ostdevname 2)_2}
- add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
- # XXX after we support non 4K disk blocksize, change following --mkfsoptions with
- # other argument
- add fs2ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
- add fs3ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs3ostdev || exit 10
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs3ostdev=$(ostdevname 2_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
+ local fs3ostvdev=$(ostvdevname 2_2)
+
+ add fs2mds $(mkfs_opts mds1) --fsname=${FSNAME2} --reformat \
+ $fs2mdsdev $fs2mdsvdev || exit 10
+ # XXX after we support non 4K disk blocksize in ldiskfs, specify a
+ # different one than the default value here.
+ add fs2ost $(mkfs_opts ost1) --mgsnode=$MGSNID --fsname=${FSNAME2} \
+ --reformat $fs2ostdev $fs2ostvdev || exit 10
+ add fs3ost $(mkfs_opts ost1) --mgsnode=$MGSNID --fsname=${FSNAME2} \
+ --reformat $fs3ostdev $fs3ostvdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
stop fs3ost -f || return 200
stop fs2ost -f || return 201
stop fs2mds -f || return 202
- rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev $fs3ostdev
unload_modules_conf || return 203
return $rc
}
local mntpt=$(facet_mntpt $SINGLEMDS)
local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
local mdsdev_sym="$TMP/sym_mdt.img"
+ local opts=$MDS_MOUNT_OPTS
+ local rc=0
+
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Currently only applicable to ldiskfs-based MDTs"
+ return
+ fi
echo "MDS : $mdsdev"
echo "SYMLINK : $mdsdev_sym"
echo "mount symlink device - $mdsdev_sym"
- local rc=0
- mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $MDS_MOUNT_OPTS $mdsdev_sym $mntpt 2>&1 )
+ if ! do_facet $SINGLEMDS test -b $mdsdev; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+ mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
+ $mdsdev_sym $mntpt 2>&1)
rc=${PIPESTATUS[0]}
echo mount_op=$mount_op
run_test 37 "verify set tunables works for symlink device"
test_38() { # bug 14222
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
setup
# like runtests
COUNT=10
run_test 40 "race during service thread startup"
test_41a() { #bug 14134
- echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+ if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
+ skip "Loop devices does not work with nosvc option"
+ return
+ fi
local rc
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
run_test 41a "mount mds with --nosvc and --nomgs"
test_41b() {
- echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+ if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
+ skip "Loop devices does not work with nosvc option"
+ return
+ fi
+
+ ! combined_mgs_mds && skip "needs combined mgs device" && return 0
stopall
reformat
stop_mds -f || return 203
}
-
run_test 41b "mount mds with --nosvc and --nomgs on first mount"
+
test_42() { #bug 14693
setup
check_mount || return 2
run_test 42 "invalid config param should not prevent client from mounting"
test_43() {
- [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
- setup
- chmod ugo+x $DIR || error "chmod 0 failed"
- set_and_check mds \
- "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
- "$FSNAME.mdt.root_squash" \
- "0:0"
- set_and_check mds \
- "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
- "$FSNAME.mdt.nosquash_nids" \
- "NONE"
+ [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
+ setup
+ chmod ugo+x $DIR || error "chmod 0 failed"
+ set_conf_param_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ "$FSNAME.mdt.root_squash" \
+ "0:0"
+ set_conf_param_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ "$FSNAME.mdt.nosquash_nids" \
+ "NONE"
#
# create set of test files
chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
- #
- # check root_squash:
- # set root squash UID:GID to RUNAS_ID
- # root should be able to access only files owned by RUNAS_ID
- #
- set_and_check mds \
- "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
- "$FSNAME.mdt.root_squash" \
- "$RUNAS_ID:$RUNAS_ID"
+ #
+ # check root_squash:
+ # set root squash UID:GID to RUNAS_ID
+ # root should be able to access only files owned by RUNAS_ID
+ #
+ set_conf_param_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash" \
+ "$FSNAME.mdt.root_squash" \
+ "$RUNAS_ID:$RUNAS_ID"
ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
error "$ST: root create permission is granted"
echo "$ST: root create permission is denied - ok"
- #
- # check nosquash_nids:
- # put client's NID into nosquash_nids list,
- # root should be able to access root file after that
- #
- local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
- NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
- NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
- set_and_check mds \
- "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
- "$FSNAME-MDTall.mdt.nosquash_nids" \
- "$NIDLIST"
+ #
+ # check nosquash_nids:
+ # put client's NID into nosquash_nids list,
+ # root should be able to access root file after that
+ #
+ local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
+ NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
+ NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
+ set_conf_param_and_check mds \
+ "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+ "$FSNAME-MDTall.mdt.nosquash_nids" \
+ "$NIDLIST"
ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
stop ost${count} -f || rc=$?
let count=count-1
done
- stop_mds || rc=$?
+ stop_mds || rc=$?
cleanup_nocli || rc=$?
#writeconf to remove all ost2 traces for subsequent tests
writeconf
mount_client $MOUNT || return 3
trap "cleanup_46a $OSTCOUNT" EXIT ERR
- local i
+ local i
for (( i=2; i<=$OSTCOUNT; i++ )); do
start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
done
# wait until osts in sync
for (( i=2; i<=$OSTCOUNT; i++ )); do
wait_osc_import_state mds ost$i FULL
+ wait_osc_import_state client ost$i FULL
done
-
#second client see all ost's
mount_client $MOUNT2 || return 8
- $LFS setstripe $MOUNT2 -c -1 || return 9
+ $LFS setstripe -c -1 $MOUNT2 || return 9
$LFS getstripe $MOUNT2 || return 10
echo "ok" > $MOUNT2/widestripe
test_48() { # bug 17636
reformat
setup_noconfig
- check_mount || return 2
+ check_mount || return 2
- $LFS setstripe $MOUNT -c -1 || return 9
+ $LFS setstripe -c -1 $MOUNT || return 9
$LFS getstripe $MOUNT || return 10
echo "ok" > $MOUNT/widestripe
# check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
test_49() { # bug 17710
- local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
- local OLD_OST_MKFS_OPTS=$OST_MKFS_OPTS
+ local timeout_orig=$TIMEOUT
+ local ldlm_timeout_orig=$LDLM_TIMEOUT
local LOCAL_TIMEOUT=20
-
- OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$LOCAL_TIMEOUT $MKFSOPT $OSTOPT"
+ LDLM_TIMEOUT=$LOCAL_TIMEOUT
+ TIMEOUT=$LOCAL_TIMEOUT
reformat
setup_noconfig
stop_ost || return 2
stop_mds || return 3
- OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$((LOCAL_TIMEOUT - 1)) $MKFSOPT $OSTOPT"
+ LDLM_TIMEOUT=$((LOCAL_TIMEOUT - 1))
reformat
setup_noconfig
cleanup || return $?
- MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
- OST_MKFS_OPTS=$OLD_OST_MKFS_OPTS
+ LDLM_TIMEOUT=$ldlm_timeout_orig
+ TIMEOUT=$timeout_orig
}
run_test 49 "check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE"
wait_osc_import_state mds ost DISCONN
lazystatfs $MOUNT || error "lazystatfs failed with one down server"
- umount_client $MOUNT || error "Unable to unmount client"
+ umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
stop_ost || error "Unable to stop OST1"
lazystatfs $MOUNT || error "lazystatfs failed with one down server"
- umount_client $MOUNT || error "Unable to unmount client"
+ umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
#writeconf to remove all ost2 traces for subsequent tests
}
test_52() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
start_mds
[ $? -eq 0 ] || { error "Unable to start MDS"; return 1; }
start_ost
[ $? -eq 0 ] || { error "Unable to mount client"; return 3; }
local nrfiles=8
- local ost1mnt=${MOUNT%/*}/ost1
+ local ost1mnt=$(facet_mntpt ost1)
local ost1node=$(facet_active_host ost1)
local ost1tmp=$TMP/conf52
+ local loop
mkdir -p $DIR/$tdir
[ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
[ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
sleep 1
- $LFS setstripe $DIR/$tdir -c -1 -s 1M
+ $LFS setstripe -c -1 -S 1M $DIR/$tdir
[ $? -eq 0 ] || { error "lfs setstripe failed"; return 7; }
for (( i=0; i < nrfiles; i++ )); do
[ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
echo mount ost1 as ldiskfs
- do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
+ do_node $ost1node mkdir -p $ost1mnt
+ [ $? -eq 0 ] || { error "Unable to create $ost1mnt"; return 23; }
+ if ! do_node $ost1node test -b $ost1_dev; then
+ loop="-o loop"
+ fi
+ do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
+ $ost1mnt
[ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
# backup objects
diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
[ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
- do_node $ost1node "umount $ost1_dev"
+ do_node $ost1node "umount $ost1mnt"
[ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
start_ost
local facet=$2
local parampat=$3
local opts=$4
+ local basethr=$5
local tmin
local tmin2
local tmax
local tstarted
local paramp
local msg="Insane $modname thread counts"
+ local ncpts=$(check_cpt_number $facet)
+ local nthrs
shift 4
setup
tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started" || echo 0)
lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
+ nthrs=$(expr $tmax - $tmin)
+ if [ $nthrs -lt $ncpts ]; then
+ nthrs=0
+ else
+ nthrs=$ncpts
+ fi
+
+ [ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
+ skip_env "module parameter forced $facet thread count" &&
+ tmin=3 && tmax=$((3 * tmax))
# Check that we can change min/max
- do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + 1))"
- do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 1))"
- tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
- tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
- lassert 25 "$msg" '(($tmin2 == ($tmin + 1) && $tmax2 == ($tmax -1)))' || return $?
+ do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + nthrs))"
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - nthrs))"
+ tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+ lassert 25 "$msg" '(($tmin2 == ($tmin + $nthrs) && $tmax2 == ($tmax - $nthrs)))' || return $?
# Check that we can set min/max to the same value
tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
LOAD_MODULES_REMOTE=true
cleanup
local oldvalue
- setmodopts -a $modname "$opts" oldvalue
+ local newvalue="${opts}=$(expr $basethr \* $ncpts)"
+ setmodopts -a $modname "$newvalue" oldvalue
load_modules
setup
lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
cleanup
- # Workaround a YALA bug where YALA expects that modules will remain
- # loaded on the servers
- LOAD_MODULES_REMOTE=false
load_modules
setup
cleanup
}
test_53a() {
- thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads=64'
+ thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads' '16'
}
run_test 53a "check OSS thread count params"
test_53b() {
- thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads=64'
+ thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' '16'
}
run_test 53b "check MDT thread count params"
-run_llverfs()
-{
- local dir=$1
- local partial_arg=""
- local size=$(df -B G $dir | tail -1 | awk '{print $2}' | sed 's/G//') # Gb
-
- # Run in partial (fast) mode if the size
- # of a partition > 10 GB
- [ $size -gt 10 ] && partial_arg="-p"
-
- llverfs $partial_arg $dir
-}
-
test_54a() {
- do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1)
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
+ do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p
[ $? -eq 0 ] || error "llverdev failed!"
reformat_and_config
}
-run_test 54a "llverdev"
+run_test 54a "test llverdev and partial verify of device"
test_54b() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
setup
- run_llverfs $MOUNT
+ run_llverfs $MOUNT -p
[ $? -eq 0 ] || error "llverfs failed!"
cleanup
}
-run_test 54b "llverfs"
+run_test 54b "test llverfs and partial verify of filesystem"
lov_objid_size()
{
}
test_55() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
local mdsdev=$(mdsdevname 1)
- local ostdev=$(ostdevname 1)
- local saved_opts=$OST_MKFS_OPTS
+ local mdsvdev=$(mdsvdevname 1)
- for i in 0 1023 2048
+ for i in 1023 2048
do
- OST_MKFS_OPTS="$saved_opts --index $i"
- reformat
-
+ add mds1 $(mkfs_opts mds1) --reformat $mdsdev $mdsvdev ||
+ exit 10
+ add ost1 $(mkfs_opts ost1) --index=$i --reformat \
+ $(ostdevname 1) $(ostvdevname 1)
setup_noconfig
stopall
-
- setup
+ setup_noconfig
sync
+
echo checking size of lov_objid for ost index $i
LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" | grep ^User | awk '{print $6}')
if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
stopall
done
- OST_MKFS_OPTS=$saved_opts
reformat
}
run_test 55 "check lov_objid size"
test_56() {
- add mds1 $MDS_MKFS_OPTS --mkfsoptions='\"-J size=16\"' --reformat $(mdsdevname 1)
- add ost1 $OST_MKFS_OPTS --index=1000 --reformat $(ostdevname 1)
- add ost2 $OST_MKFS_OPTS --index=10000 --reformat $(ostdevname 2)
+ local mds_journal_size_orig=$MDSJOURNALSIZE
- start_mds
+ MDSJOURNALSIZE=16
+ add mds1 $(mkfs_opts mds1) --reformat $(mdsdevname 1) $(mdsvdevname 1)
+ add ost1 $(mkfs_opts ost1) --index=1000 --reformat \
+ $(ostdevname 1) $(ostvdevname 1)
+ add ost2 $(mkfs_opts ost2) --index=10000 --reformat \
+ $(ostdevname 2) $(ostvdevname 2)
+
+ start_mgsmds
start_ost
start_ost2 || error "Unable to start second ost"
mount_client $MOUNT || error "Unable to mount client"
echo ok
$LFS osts
- [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
stopall
+ MDSJOURNALSIZE=$mds_journal_size_orig
reformat
}
run_test 56 "check big indexes"
}
test_58() { # bug 22658
- [ "$FSTYPE" != "ldiskfs" ] && skip "not supported for $FSTYPE" && return
- setup
+ if [ $(facet_fstype mds) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+ setup_noconfig
mkdir -p $DIR/$tdir
createmany -o $DIR/$tdir/$tfile-%d 100
# make sure that OSTs do not cancel llog cookies before we unmount the MDS
}
run_test 59 "writeconf mount option"
+test_60() { # LU-471
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
+ add mds1 $(mkfs_opts mds1) \
+ --mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' --reformat \
+ $(mdsdevname 1) $(mdsvdevname 1) || exit 10
+
+ dump=$(do_facet $SINGLEMDS dumpe2fs $(mdsdevname 1))
+ rc=${PIPESTATUS[0]}
+ [ $rc -eq 0 ] || error "dumpe2fs $(mdsdevname 1) failed"
+
+ # MDT default has dirdata feature
+ echo $dump | grep dirdata > /dev/null || error "dirdata is not set"
+ # we disable uninit_bg feature
+ echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
+ # we set stride extended options
+ echo $dump | grep stride > /dev/null || error "stride is not set"
+ reformat
+}
+run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
+
+test_61() { # LU-80
+ local reformat=false
+
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
+ { skip "Need MDS version at least 2.1.53"; return 0; }
+
+ if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+ ! large_xattr_enabled; then
+ reformat=true
+ local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+ LDISKFS_MKFS_OPTS+=" -O large_xattr"
+ add $SINGLEMDS $(mkfs_opts $SINGLEMDS) --reformat $mds_dev ||
+ error "reformatting $mds_dev failed"
+ fi
+
+ setup_noconfig || error "setting up the filesystem failed"
+ client_up || error "starting client failed"
+
+ local file=$DIR/$tfile
+ touch $file
+
+ local large_value="$(generate_string $(max_xattr_size))"
+ local small_value="bar"
+
+ local name="trusted.big"
+ log "save large xattr $name on $file"
+ setfattr -n $name -v $large_value $file ||
+ error "saving $name on $file failed"
+
+ local new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after saving"
+
+ log "shrink value of $name on $file"
+ setfattr -n $name -v $small_value $file ||
+ error "shrinking value of $name on $file failed"
+
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$small_value" ]] &&
+ error "$name different after shrinking"
+
+ log "grow value of $name on $file"
+ setfattr -n $name -v $large_value $file ||
+ error "growing value of $name on $file failed"
+
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after growing"
+
+ log "check value of $name on $file after remounting MDS"
+ fail $SINGLEMDS
+ new_value=$(get_xattr_value $name $file)
+ [[ "$new_value" != "$large_value" ]] &&
+ error "$name different after remounting MDS"
+
+ log "remove large xattr $name from $file"
+ setfattr -x $name $file || error "removing $name from $file failed"
+
+ rm -f $file
+ stopall
+ if $reformat; then
+ LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS% -O large_xattr}
+ reformat
+ fi
+}
+run_test 61 "large xattr"
+
+test_62() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
+ # MRP-118
+ local mdsdev=$(mdsdevname 1)
+ local ostdev=$(ostdevname 1)
+
+ [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
+ { skip "Need MDS version at least 2.2.51"; return 0; }
+
+ echo "disable journal for mds"
+ do_facet mds tune2fs -O ^has_journal $mdsdev || error "tune2fs failed"
+ start_mds && error "MDT start should fail"
+ echo "disable journal for ost"
+ do_facet ost1 tune2fs -O ^has_journal $ostdev || error "tune2fs failed"
+ start_ost && error "OST start should fail"
+ cleanup || return $?
+ reformat_and_config
+}
+run_test 62 "start with disabled journal"
+
+test_63() {
+ if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+ skip "Only applicable to ldiskfs-based MDTs"
+ return
+ fi
+
+ local inode_slab=$(do_facet $SINGLEMDS \
+ "awk '/ldiskfs_inode_cache/ { print \\\$5 }' /proc/slabinfo")
+ if [ -z "$inode_slab" ]; then
+ skip "ldiskfs module has not been loaded"
+ return
+ fi
+
+ echo "$inode_slab ldisk inodes per page"
+ [ "$inode_slab" -ge "3" ] ||
+ error "ldisk inode size is too big, $inode_slab objs per page"
+ return
+}
+run_test 63 "Verify each page can at least hold 3 ldisk inodes"
+
+test_64() {
+ start_mds
+ start_ost
+ start_ost2 || error "Unable to start second ost"
+ mount_client $MOUNT || error "Unable to mount client"
+ stop_ost2 || error "Unable to stop second ost"
+ echo "$LFS df"
+ $LFS df --lazy || error "lfs df failed"
+ cleanup || return $?
+}
+run_test 64 "check lfs df --lazy "
+
if ! combined_mgs_mds ; then
stop mgs
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff