# requirement:
# add uml1 uml2 uml3 in your /etc/hosts
+# FIXME - there is no reason to use all of these different
+# return codes, espcially when most of them are mapped to something
+# else anyway. The combination of test number and return code
+# figure out what failed.
+
set -e
SRCDIR=`dirname $0`
. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
-FORCE=${FORCE:-" --force"}
-
gen_config() {
rm -f $XMLCONFIG
start_mds() {
echo "start mds service on `facet_active_host mds`"
- start mds --reformat $MDSLCONFARGS > /dev/null || return 94
+ start mds --reformat $MDSLCONFARGS || return 94
}
stop_mds() {
echo "stop mds service on `facet_active_host mds`"
- stop mds $@ > /dev/null || return 97
+ stop mds $@ || return 97
}
start_ost() {
echo "start ost service on `facet_active_host ost`"
- start ost --reformat $OSTLCONFARGS > /dev/null || return 95
+ start ost --reformat $OSTLCONFARGS || return 95
}
stop_ost() {
echo "stop ost service on `facet_active_host ost`"
- stop ost $@ > /dev/null || return 98
+ stop ost $@ || return 98
}
mount_client() {
local MOUNTPATH=$1
echo "mount lustre on ${MOUNTPATH}....."
- zconf_mount $MOUNTPATH > /dev/null || return 96
+ zconf_mount `hostname` $MOUNTPATH || return 96
}
umount_client() {
local MOUNTPATH=$1
echo "umount lustre on ${MOUNTPATH}....."
- zconf_umount $MOUNTPATH > /dev/null || return 97
+ zconf_umount `hostname` $MOUNTPATH || return 97
}
manual_umount_client(){
}
cleanup() {
- umount_client $MOUNT || return -200
- stop_mds || return -201
- stop_ost || return -202
+ umount_client $MOUNT || return 200
+ stop_mds || return 201
+ stop_ost || return 202
+ # catch case where these return just fine, but modules are still not unloaded
+ /sbin/lsmod | grep -q portals
+ if [ 1 -ne $? ]; then
+ echo "modules still loaded..."
+ return 203
+ fi
}
check_mount() {
start_mds
mount_client $MOUNT
check_mount || return 41
- cleanup
+ cleanup || return $?
}
run_test 0 "single mount setup"
test_1() {
start_ost
echo "start ost second time..."
- start ost --reformat $OSTLCONFARGS > /dev/null
+ start ost --reformat $OSTLCONFARGS
start_mds
mount_client $MOUNT
check_mount || return 42
- cleanup
+ cleanup || return $?
}
run_test 1 "start up ost twice"
start_ost
start_mds
echo "start mds second time.."
- start mds --reformat $MDSLCONFARGS > /dev/null
+ start mds --reformat $MDSLCONFARGS
mount_client $MOUNT
check_mount || return 43
- cleanup
+ cleanup || return $?
}
run_test 2 "start up mds twice"
check_mount || return 44
umount_client $MOUNT
- cleanup
+ cleanup || return $?
}
run_test 3 "mount client twice"
test_4() {
setup
touch $DIR/$tfile || return 85
- stop_ost ${FORCE}
-
- # cleanup may return an error from the failed
- # disconnects; for now I'll consider this successful
- # if all the modules have unloaded.
- if ! cleanup ; then
- lsmod | grep -q portals && return 1
- fi
+ stop_ost --force
+ cleanup
+ eno=$?
+ # ok for ost to fail shutdown
+ if [ 202 -ne $eno ]; then
+ return $eno;
+ fi
return 0
}
run_test 4 "force cleanup ost, then cleanup"
test_5() {
setup
- touch $DIR/$tfile || return 86
- stop_mds ${FORCE} || return 98
+ touch $DIR/$tfile || return 1
+ stop_mds --force || return 2
# cleanup may return an error from the failed
# disconnects; for now I'll consider this successful
# if all the modules have unloaded.
- if ! cleanup ; then
- lsmod | grep -q portals && return 1
- fi
+ umount $MOUNT &
+ UMOUNT_PID=$!
+ sleep $TIMEOUT
+ echo "killing umount"
+ kill -TERM $UMOUNT_PID
+ wait $UMOUNT_PID
+
+ # cleanup client modules
+ $LCONF --cleanup --nosetup --node client_facet $XMLCONFIG > /dev/null
+
+ # stop_mds is a no-op here, and should not fail
+ stop_mds || return 4
+ stop_ost || return 5
+
+ lsmod | grep -q portals && return 6
return 0
}
run_test 5 "force cleanup mds, then cleanup"
manual_umount_client
mount_client ${MOUNT} || return 87
touch $DIR/a || return 86
- cleanup
+ cleanup || return $?
}
run_test 6 "manual umount, then mount again"
test_7() {
setup
manual_umount_client
- cleanup
+ cleanup || return $?
}
run_test 7 "manual umount, then cleanup"
return 1
fi
check_mount || return 41
- cleanup
+ cleanup || return $?
# the new PTLDEBUG/SUBSYSTEM used for lconf --ptldebug/subsystem
PTLDEBUG="inode+trace"
fi
mount_client $MOUNT
check_mount || return 41
- cleanup
+ cleanup || return $?
# resume the old configuration
PTLDEBUG=$OLDPTLDEBUG
}
run_test 11 "use default lov configuration (should return error)"
+test_12() {
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="batch.xml"
+ BATCHFILE="batchfile"
+
+ # test double quote
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
+ # --mkfsoptions "-I 128"
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "matched double quote success"
+ else
+ echo "matched double quote fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
+ # --mkfsoptions "-I 128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "unmatched double quote should return error"
+
+ # test single quote
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
+ # --mkfsoptions '-I 128'
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "matched single quote success"
+ else
+ echo "matched single quote fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
+ # --mkfsoptions '-I 128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "unmatched single quote should return error"
+
+ # test backslash
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
+ # --mkfsoptions \-\I\ \128
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
+ if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
+ echo "backslash followed by a whitespace/letter success"
+ else
+ echo "backslash followed by a whitespace/letter fail"
+ return 1
+ fi
+ rm -f $XMLCONFIG
+ rm -f $BATCHFILE
+ echo "--add net --node localhost --nid localhost.localdomain --nettype tcp" > $BATCHFILE
+ echo "--add mds --node localhost --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
+ # --mkfsoptions -I\ 128\
+ do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
+ echo "backslash followed by nothing should return error"
+
+ rm -f $BATCHFILE
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
+
+test_13() {
+ OLDXMLCONFIG=$XMLCONFIG
+ XMLCONFIG="conf13-1.xml"
+ SECONDXMLCONFIG="conf13-2.xml"
+
+ # check long uuid will be truncated properly and uniquely
+ echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
+ [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
+ do_lmc --add net --node localhost --nid localhost.localdomain --nettype tcp
+ do_lmc --add mds --node localhost --mds mds1_name_longer_than_31characters
+ do_lmc --add mds --node localhost --mds mds2_name_longer_than_31characters
+ if [ ! -f "$XMLCONFIG" ]; then
+ echo "Error:no file $XMLCONFIG created!"
+ return 1
+ fi
+ EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
+ EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
+ FOUNDMDS1UUID=`awk -F"'" '/<mds uuid=/{print $2}' $XMLCONFIG | sed -n '1p'`
+ FOUNDMDS2UUID=`awk -F"'" '/<mds uuid=/{print $2}' $XMLCONFIG | sed -n '2p'`
+ if [ $EXPECTEDMDS1UUID != $FOUNDMDS1UUID ]; then
+ echo "Error:expected uuid for mds1: $EXPECTEDMDS1UUID; found: $FOUNDMDS1UUID"
+ return 1
+ fi
+ if [ $EXPECTEDMDS2UUID != $FOUNDMDS2UUID ]; then
+ echo "Error:expected uuid for mds2: $EXPECTEDMDS2UUID; found: $FOUNDMDS2UUID"
+ return 1
+ fi
+ echo "Success:long uuid truncated successfully and being unique."
+
+ # check multiple invocations for lmc generate same XML configuration file
+ rm -f $XMLCONFIG
+ echo "Generate the first XML configuration file"
+ gen_config
+ echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
+ mv $XMLCONFIG $SECONDXMLCONFIG || return $?
+ echo "Generate the second XML configuration file"
+ gen_config
+ if [ `diff $XMLCONFIG $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
+ echo "Success:multiple invocations for lmc generate same XML file"
+ else
+ echo "Error: multiple invocations for lmc generate different XML file"
+ return 1
+ fi
+
+ rm -f $XMLCONFIG
+ rm -f $SECONDXMLCONFIG
+ XMLCONFIG=$OLDXMLCONFIG
+}
+run_test 13 "check new_uuid of lmc operating correctly"
+
+test_14() {
+ rm -f $XMLCONFIG
+
+ # create xml file with --mkfsoptions for ost
+ echo "create xml file with --mkfsoptions for ost"
+ add_mds mds --dev $MDSDEV --size $MDSSIZE
+ add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
+ --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+ add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
+ --mkfsoptions "-Llabel_conf_15"
+ add_client client mds --lov lov1 --path $MOUNT
+
+ FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
+ EXPECTEDSTRING="mkfsoptions>-Llabel_conf_15"
+ if [ $EXPECTEDSTRING != $FOUNDSTRING ]; then
+ echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
+ return 1
+ fi
+ echo "Success:mkfsoptions for ost written to xml file correctly."
+
+ # mount lustre to test lconf mkfsoptions-parsing
+ echo "mount lustre"
+ start_ost
+ start_mds
+ mount_client $MOUNT || return $?
+ if [ -z "`dumpe2fs -h $OSTDEV | grep label_conf_15`" ]; then
+ echo "Error: the mkoptions not applied to mke2fs of ost."
+ return 1
+ fi
+ cleanup
+ echo "lconf mkfsoptions for ost success"
+
+ gen_config
+}
+run_test 14 "test mkfsoptions of ost for lmc and lconf"
+
equals_msg "Done"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff