SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
+LUSTRE_TESTS_API_DIR=${LUSTRE_TESTS_API_DIR:-${LUSTRE}/tests/clientapi}
export MULTIOP=${MULTIOP:-multiop}
. $LUSTRE/tests/test-framework.sh
run_test 21d "start mgs then ost and then mds"
test_22() {
- local num
-
start_mds
echo Client mount with ost in logs, but none running
start_ost
# wait until mds connected to ost and open client connection
- for num in $(seq 1 $MDSCOUNT); do
- wait_osc_import_state mds${num} ost FULL
- done
+ wait_osc_import_state mds ost FULL
stop_ost
mount_client $MOUNT
# check_mount will block trying to contact ost
sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
fi
mount_client $MOUNT
- for num in $(seq 1 $MDSCOUNT); do
- wait_osc_import_state mds${num} ost FULL
- done
+ wait_osc_import_state mds ost FULL
wait_osc_import_state client ost FULL
check_mount || return 41
pass
"MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
ps -ef | grep mount
fi
- stop_mds || error
- stop_ost || error
+ stop_mds || error "stopping MDSes failed"
+ stop_ost || error "stopping OSSes failed"
}
run_test 23a "interrupt client during recovery mount delay"
exit 0
fi
- if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
- skip "LU-2200: Test cannot run over Infiniband"
- exit 0
- fi
-
local IMGTYPE=$(facet_fstype $SINGLEMDS)
tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\')
local tarball=$1
local writeconf=$2
local dne_upgrade=${dne_upgrade:-"no"}
+ local ff_convert=${ff_convert:-"no"}
local shall_cleanup_mdt=false
local shall_cleanup_mdt1=false
local shall_cleanup_ost=false
echo " Kernel: $img_kernel"
echo " Arch: $img_arch"
+ local version=$(version_code $img_commit)
+ [[ $version -gt $(version_code 2.4.0) ]] && ff_convert="no"
+
$r $LCTL set_param debug="$PTLDEBUG"
$r $TUNEFS --dryrun $tmp/mdt || {
}
fi
else
+ if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
+ { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
+ "(Need MGS version at least 2.3.59)"; return 0; }
+
+ local osthost=$(facet_active_host ost1)
+ local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
+
+ $r mount -t lustre -o loop,nosvc $tmp/mdt $tmp/mnt/mdt
+ $r lctl replace_nids $fsname-OST0000 $ostnid
+ $r lctl replace_nids $fsname-MDT0000 $nid
+ $r umount $tmp/mnt/mdt
+ fi
+
mopts=loop,exclude=$fsname-OST0000
fi
return 1
}
+ if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
+ $r $LCTL lfsck_start -M $fsname-OST0000 || {
+ error_noexit "Start OI scrub on OST0"
+ return 1
+ }
+
+ # The oi_scrub should be on ost1, but for test_32(),
+ # all on the SINGLEMDS.
+ wait_update_facet $SINGLEMDS "$LCTL get_param -n \
+ osd-ldiskfs.$fsname-OST0000.oi_scrub |
+ awk '/^status/ { print \\\$2 }'" "completed" 30 || {
+ error_noexit "Failed to get the expected 'completed'"
+ return 1
+ }
+
+ local UPDATED=$($r $LCTL get_param -n \
+ osd-ldiskfs.$fsname-OST0000.oi_scrub |
+ awk '/^updated/ { print $2 }')
+ [ $UPDATED -ge 1 ] || {
+ error_noexit "Only $UPDATED objects have been converted"
+ return 1
+ }
+ fi
+
if [ "$dne_upgrade" != "no" ]; then
$r $LCTL conf_param \
$fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
# on an architecture with different number of bits per
# "long".
#
- if [ $(t32_bits_per_long $(uname -m)) != \
- $(t32_bits_per_long $img_arch) ]; then
+ if [ $(t32_bits_per_long $(uname -m)) != \
+ $(t32_bits_per_long $img_arch) ]; then
echo "Different number of bits per \"long\" from the disk image"
for list in list.orig list; do
sed -i -e 's/^[0-9]\+[ \t]\+//' $tmp/$list
return 1
}
shall_cleanup_mdt=false
+
$r umount -d $tmp/mnt/ost || {
error_noexit "Unmounting the OST"
return 1
error_noexit "tunefs.lustre before remounting the MDT"
return 1
}
- $r mount -t lustre -o loop,exclude=$fsname-OST0000 $tmp/mdt \
+ $r mount -t lustre -o loop,exclude=$fsname-OST0000 $tmp/mdt \
$tmp/mnt/mdt || {
error_noexit "Remounting the MDT"
return 1
t32_check
for tarball in $tarballs; do
- t32_test $tarball || rc=$?
+ t32_test $tarball || let "rc += $?"
done
return $rc
}
t32_check
for tarball in $tarballs; do
- t32_test $tarball writeconf || rc=$?
+ t32_test $tarball writeconf || let "rc += $?"
done
return $rc
}
}
run_test 32c "dne upgrade test"
+test_32d() {
+ local tarballs
+ local tarball
+ local rc=0
+
+ t32_check
+ for tarball in $tarballs; do
+ ff_convert=yes t32_test $tarball || rc=$?
+ done
+ return $rc
+}
+run_test 32d "convert ff test"
+
test_33a() { # bug 12333, was test_33
local rc=0
local FSNAME2=test-123
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
- "$(h2$NETTYPE $FAKENID)" || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" |
+ awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet mgs "$LCTL conf_param \
+ ${device}.failover.node=$(h2$NETTYPE $FAKENID)" || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" | \
- awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
- do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
- "$(h2$NETTYPE $FAKENID)" || return 1
+ local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
+ awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet mgs "$LCTL conf_param \
+ ${device}.failover.node=$(h2$NETTYPE $FAKENID)" || return 1
local at_max_saved=0
# adaptive timeouts may prevent seeing the issue
tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min")
tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max")
tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started")
- lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
+ lassert 28 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
cleanup
load_modules
test_57a() { # bug 22656
local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
writeconf_or_reformat
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
start_mgsmds
start_ost && error "OST registration from failnode should fail"
test_57b() {
local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
writeconf_or_reformat
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" || error "tunefs failed"
start_mgsmds
start_ost || error "OST registration from servicenode should not fail"
stop_mds || error "stopping mds failed"
if combined_mgs_mds; then
- start_mds "-o nosvc" ||
+ start_mdt 1 "-o nosvc" ||
error "starting mds with nosvc option failed"
fi
}
run_test 66 "replace nids"
+test_67() { #LU-2950
+ local legacy="$TMP/legacy_lnet_config"
+ local new="$TMP/new_routes_test"
+ local out="$TMP/config_out_file"
+ local verify="$TMP/conv_verify"
+ local verify_conf="$TMP/conf_verify"
+
+ # Create the legacy file that will be run through the
+ # lustre_routes_conversion script
+ cat <<- LEGACY_LNET_CONFIG > $legacy
+ tcp1 23 192.168.213.1@tcp:1; tcp5 34 193.30.4.3@tcp:4;
+ tcp2 54 10.1.3.2@tcp;
+ tcp3 10.3.4.3@tcp:3;
+ tcp4 10.3.3.4@tcp;
+ LEGACY_LNET_CONFIG
+
+ # Create the verification file to verify the output of
+ # lustre_routes_conversion script against.
+ cat <<- VERIFY_LNET_CONFIG > $verify
+ tcp1: { gateway: 192.168.213.1@tcp, hop: 23, priority: 1 }
+ tcp5: { gateway: 193.30.4.3@tcp, hop: 34, priority: 4 }
+ tcp2: { gateway: 10.1.3.2@tcp, hop: 54 }
+ tcp3: { gateway: 10.3.4.3@tcp, priority: 3 }
+ tcp4: { gateway: 10.3.3.4@tcp }
+ VERIFY_LNET_CONFIG
+
+ # Create the verification file to verify the output of
+ # lustre_routes_config script against
+ cat <<- VERIFY_LNET_CONFIG > $verify_conf
+ lctl --net tcp1 add_route 192.168.213.1@tcp 23 1
+ lctl --net tcp5 add_route 193.30.4.3@tcp 34 4
+ lctl --net tcp2 add_route 10.1.3.2@tcp 54 4
+ lctl --net tcp3 add_route 10.3.4.3@tcp 1 3
+ lctl --net tcp4 add_route 10.3.3.4@tcp 1 3
+ VERIFY_LNET_CONFIG
+
+ lustre_routes_conversion $legacy $new > /dev/null
+ if [ -f $new ]; then
+ # verify the conversion output
+ cmp -s $new $verify > /dev/null
+ if [ $? -eq 1 ]; then
+ error "routes conversion failed"
+ fi
+
+ lustre_routes_config --dry-run --verbose $new > $out
+ # check that the script succeeded
+ cmp -s $out $verify_conf > /dev/null
+ if [ $? -eq 1 ]; then
+ error "routes config failed"
+ fi
+ else
+ error "routes conversion test failed"
+ fi
+ # remove generated files
+ rm -f $new $legacy $verify $verify_conf $out
+}
+run_test 67 "test routes conversion and configuration"
+
+test_68() {
+ local fid
+ local seq
+ local START
+ local END
+
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
+ { skip "Need MDS version at least 2.4.53"; return 0; }
+
+ umount_client $MOUNT || error "umount client failed"
+
+ start_mdt 1 || error "MDT start failed"
+ start_ost
+
+ # START-END - the sequences we'll be reserving
+ START=$(do_facet $SINGLEMDS \
+ lctl get_param -n seq.ctl*.space | awk -F'[[ ]' '{print $2}')
+ END=$((START + (1 << 30)))
+ do_facet $SINGLEMDS \
+ lctl set_param seq.ctl*.fldb="[$START-$END\):0:mdt"
+
+ # reset the sequences MDT0000 has already assigned
+ do_facet $SINGLEMDS \
+ lctl set_param seq.srv*MDT0000.space=clear
+
+ # remount to let the client allocate new sequence
+ mount_client $MOUNT || error "mount client failed"
+
+ touch $DIR/$tfile
+ do_facet $SINGLEMDS \
+ lctl get_param seq.srv*MDT0000.space
+ $LFS path2fid $DIR/$tfile
+
+ local old_ifs="$IFS"
+ IFS='[:]'
+ fid=($($LFS path2fid $DIR/$tfile))
+ IFS="$old_ifs"
+ let seq=${fid[1]}
+
+ if [[ $seq < $END ]]; then
+ error "used reserved sequence $seq?"
+ fi
+ cleanup || return $?
+}
+run_test 68 "be able to reserve specific sequences in FLDB"
+
+test_69() {
+ setup
+
+ # use OST0000 since it probably has the most creations
+ local OSTNAME=$(ostname_from_index 0)
+ local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
+ local last_id=$(do_facet mds1 lctl get_param -n \
+ osc.$mdtosc_proc1.prealloc_last_id)
+
+ # Want to have OST LAST_ID over 1.5 * OST_MAX_PRECREATE to
+ # verify that the LAST_ID recovery is working properly. If
+ # not, then the OST will refuse to allow the MDS connect
+ # because the LAST_ID value is too different from the MDS
+ #define OST_MAX_PRECREATE=20000
+ local num_create=$((20000 * 3/2 - $last_id + 100))
+
+ mkdir $DIR/$tdir
+ $LFS setstripe -i 0 $DIR/$tdir
+ createmany $DIR/$tdir/$tfile- $num_create
+ # delete all of the files with objects on OST0 so the
+ # filesystem is not inconsistent later on
+ $LFS find $MOUNT --index 0 -print0 | xargs -0 unlink
+
+ stop_ost || error "OST0 stop failure"
+ add ost1 $(mkfs_opts ost1 $ostdev) --reformat --replace $ostdev ||
+ error "reformat and replace $ostdev failed"
+ start_ost || error "OST0 restart failure"
+
+ touch $DIR/$tdir/$tfile-last || error "create file after reformat"
+ local idx=$($LFS getstripe -c $DIR/$tdir/$tfile-last)
+ [ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
+
+ cleanup
+}
+run_test 68 "replace an OST with the same index"
+
test_70a() {
[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
local MDTIDX=1
+ cleanup
+
start_mdt 1 || error "MDT0 start fail"
start_ost || error "OST0 start fail"
skip "ldiskfs only test" && return
#tune MDT with "-O extents"
- add $SINGLEMDS \
- $(mkfs_opts $SINGLEMDS ${mdsdev}) --reformat $mdsdev ||
- error "add $SINGLEMDS failed"
- $TUNE2FS -O extents $mdsdev
+
+ for num in $(seq $MDSCOUNT); do
+ add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
+ --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
+ error "add mds $num failed"
+ $TUNE2FS -O extents $(mdsdevname $num)
+ done
+
add ost1 $(mkfs_opts ost1 $ostdev) --reformat $ostdev ||
error "add $ostdev failed"
start_mgsmds || error "start mds failed"
}
run_test 72 "test fast symlink with extents flag enabled"
+test_73() { #LU-3006
+ load_modules
+ [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
+ do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
+ error "1st tunefs failed"
+ start_mgsmds || error "start mds failed"
+ start_ost || error "start ost failed"
+ mount_client $MOUNT || error "mount client failed"
+ lctl get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
+ grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
+ umount_client $MOUNT || error "umount client failed"
+ stopall
+ reformat
+}
+run_test 73 "failnode to update from mountdata properly"
+
+test_74() { # LU-1606
+ for TESTPROG in $LUSTRE_TESTS_API_DIR/*.c; do
+ gcc -Wall -Werror $LUSTRE_TESTS_API_DIR/simple_test.c \
+ -I$LUSTRE/include \
+ -L$LUSTRE/utils -llustreapi ||
+ error "client api broken"
+ done
+ cleanup || return $?
+}
+run_test 74 "Lustre client api program can compile and link"
+
+test_75() { # LU-2374
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
+ skip "Need MDS version at least 2.4.1" && return
+
+ local index=0
+ local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
+ --reformat $(mdsdevname 1) $(mdsvdevname 1)"
+ local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
+ --reformat $(ostdevname 1) $(ostvdevname 1)"
+
+ #check with default parameters
+ add mds1 $opts_mds || error "add mds1 failed for default params"
+ add ost1 $opts_ost || error "add ost1 failed for default params"
+
+ opts_mds=$(echo $opts_mds | sed -e "s/--mdt//")
+ opts_mds=$(echo $opts_mds |
+ sed -e "s/--index=$index/--index=$index --mdt/")
+ opts_ost=$(echo $opts_ost | sed -e "s/--ost//")
+ opts_ost=$(echo $opts_ost |
+ sed -e "s/--index=$index/--index=$index --ost/")
+
+ add mds1 $opts_mds || error "add mds1 failed for new params"
+ add ost1 $opts_ost || error "add ost1 failed for new params"
+ return 0
+}
+run_test 75 "The order of --index should be irrelevant"
+
+test_76() {
+ [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
+ { skip "Need MDS version at least 2.4.52" && return 0; }
+ setup
+ local MDMB_PARAM="osc.*.max_dirty_mb"
+ echo "Change MGS params"
+ local MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM |
+ head -1)
+ echo "max_dirty_mb: $MAX_DIRTY_MB"
+ local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB + MAX_DIRTY_MB))
+ echo "new_max_dirty_mb: $NEW_MAX_DIRTY_MB"
+ do_facet mgs $LCTL set_param -P $MDMB_PARAM=$NEW_MAX_DIRTY_MB
+ wait_update $HOSTNAME "lctl get_param -n $MDMB_PARAM |
+ head -1" $NEW_MAX_DIRTY_MB
+ MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
+ echo "$MAX_DIRTY_MB"
+ [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
+ error "error while apply max_dirty_mb"
+
+ echo "Check the value is stored after remount"
+ stopall
+ setupall
+ wait_update $HOSTNAME "lctl get_param -n $MDMB_PARAM |
+ head -1" $NEW_MAX_DIRTY_MB
+ MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
+ [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
+ error "max_dirty_mb is not saved after remount"
+
+ echo "Change OST params"
+ CLIENT_PARAM="obdfilter.*.client_cache_count"
+ local CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "client_cache_count: $CLIENT_CACHE_COUNT"
+ NEW_CLIENT_CACHE_COUNT=$((CLIENT_CACHE_COUNT+CLIENT_CACHE_COUNT))
+ echo "new_client_cache_count: $NEW_CLIENT_CACHE_COUNT"
+ do_facet mgs $LCTL set_param -P $CLIENT_PARAM=$NEW_CLIENT_CACHE_COUNT
+ wait_update $(facet_host ost1) "lctl get_param -n $CLIENT_PARAM |
+ head -1" $NEW_CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "$CLIENT_CACHE_COUNT"
+ [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
+ error "error while apply client_cache_count"
+
+ echo "Check the value is stored after remount"
+ stopall
+ setupall
+ wait_update $(facet_host ost1) "lctl get_param -n $CLIENT_PARAM |
+ head -1" $NEW_CLIENT_CACHE_COUNT
+ CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
+ head -1)
+ echo "$CLIENT_CACHE_COUNT"
+ [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
+ error "client_cache_count is not saved after remount"
+ stopall
+}
+run_test 76 "set permanent params set_param -P"
+
+test_77() { # LU-3445
+ local server_version=$(lustre_version_code $SINGLEMDS)
+
+ [[ $server_version -ge $(version_code 2.2.60) ]] &&
+ [[ $server_version -le $(version_code 2.4.0) ]] &&
+ skip "Need MDS version < 2.2.60 or > 2.4.0" && return
+
+ if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
+ is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
+ skip_env "mixed loopback and real device not working" && return
+ fi
+
+ local fs2mdsdev=$(mdsdevname 1_2)
+ local fs2ostdev=$(ostdevname 1_2)
+ local fs2mdsvdev=$(mdsvdevname 1_2)
+ local fs2ostvdev=$(ostvdevname 1_2)
+ local fsname=test1234
+ local mgsnid
+ local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
+
+ add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
+ --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT ||
+ error "start fs2mds failed"
+
+ mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
+ [[ $mgsnid = *,* ]] || mgsnid+=",$mgsnid"
+
+ add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
+ --failnode=$failnid --fsname=$fsname \
+ --reformat $fs2ostdev $fs2ostvdev ||
+ error "add fs2ost failed"
+ start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
+
+ mkdir -p $MOUNT2
+ mount -t lustre $mgsnid:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
+ DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
+ cleanup_24a
+}
+run_test 77 "comma-separated MGS NIDs and failover node NIDs"
+
if ! combined_mgs_mds ; then
stop mgs
fi