OSTSIZE=200000
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+if ! combined_mgs_mds; then
+ # bug number for skipped test: 23954
+ ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
+fi
+
# STORED_MDSSIZE is used in test_18
if [ -n "$MDSSIZE" ]; then
STORED_MDSSIZE=$MDSSIZE
stop $SINGLEMDS -f || return 97
}
+stop_mgs() {
+ echo "stop mgs service on `facet_active_host mgs`"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
+}
+
start_ost() {
echo "start ost1 service on `facet_active_host ost1`"
start ost1 `ostdevname 1` $OST_MOUNT_OPTS $@ || return 95
}
remount_client() {
- local SAVEMOUNTOPT=$MOUNTOPT
- MOUNTOPT="remount,$1"
+ local mountopt="-o remount,$1"
local MOUNTPATH=$2
echo "remount '$1' lustre on ${MOUNTPATH}....."
- zconf_mount `hostname` $MOUNTPATH || return 96
- MOUNTOPT=$SAVEMOUNTOPT
+ zconf_mount `hostname` $MOUNTPATH "$mountopt" || return 96
}
umount_client() {
start_mds || error "MDT start failed"
start_ost || error "OST start failed"
mount_client $MOUNT || error "client start failed"
+ client_up || error "client_up failed"
}
setup_noconfig() {
}
run_test 9 "test ptldebug and subsystem for mkfs"
+is_blkdev () {
+ local facet=$1
+ local dev=$2
+ local size=${3:-""}
+
+ local rc=0
+ do_facet $facet "test -b $dev" || rc=1
+ if [[ "$size" ]]; then
+ local in=$(do_facet $facet "dd if=$dev of=/dev/null bs=1k count=1 skip=$size 2>&1" |\
+ awk '($3 == "in") { print $1 }')
+ [[ $in = "1+0" ]] || rc=1
+ fi
+ return $rc
+}
+
#
# Test 16 was to "verify that lustre will correct the mode of OBJECTS".
# But with new MDS stack we don't care about the mode of local objects
#
test_17() {
- local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ setup
+ check_mount || return 41
+ cleanup || return $?
- if [ ! -e "$MDSDEV" ]; then
- echo "no $MDSDEV existing, so mount Lustre to create one"
- setup
- check_mount || return 41
- cleanup || return $?
+ echo "Remove mds config log"
+ if ! combined_mgs_mds ; then
+ stop mgs
fi
- echo "Remove mds config log"
- do_facet $SINGLEMDS "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
+ do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MGSDEV || return \$?" || return $?
+
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
start_ost
- start_mds && return 42
- reformat_and_config
+ start_mds && return 42
+ reformat_and_config
}
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
log "use STORED_MDSSIZE=$STORED_MDSSIZE"
# check if the block device is large enough
- [ -z "$OK" -a -b $MDSDEV ] && \
- [ "$(dd if=$MDSDEV of=/dev/null bs=1k count=1 skip=$MIN 2>&1 |
- awk '($3 == "in") { print $1 }')" = "1+0" ] && OK=1 && \
+ [ -z "$OK" ] && $(is_blkdev $SINGLEMDS $MDSDEV $MIN) && OK=1 &&
myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
# check if a loopback device has enough space for fs metadata (5%)
- [ -z "$OK" ] && [ -f $MDSDEV -o ! -e $MDSDEV ] &&
- SPACE=$(df -P $(dirname $MDSDEV) |
- awk '($1 != "Filesystem") {print $4}') &&
- [ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
+
+ if [ -z "$OK" ]; then
+ local SPACE=$(do_facet $SINGLEMDS "[ -f $MDSDEV -o ! -e $MDSDEV ] && df -P \\\$(dirname $MDSDEV)" |
+ awk '($1 != "Filesystem") {print $4}')
+ ! [ -z "$SPACE" ] && [ $SPACE -gt $((MIN / 20)) ] && \
+ OK=1 && myMDSSIZE=$MIN && \
log "use file $MDSDEV with MIN=$MIN"
+ fi
[ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
echo "mount mds with large journal..."
local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
- MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
+ local opts="--mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
+
+ if combined_mgs_mds ; then
+ MDS_MKFS_OPTS="--mgs $opts"
+ else
+ MDS_MKFS_OPTS="--mgsnode=$MGSNID $opts"
+ fi
reformat_and_config
echo "mount lustre system..."
- setup
+ setup
check_mount || return 41
echo "check journal size..."
- local FOUNDSIZE=`do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
+ local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
else
}
run_test 21c "start mds between two osts, stop mds last"
+test_21d() {
+ if combined_mgs_mds ; then
+ skip "need separate mgs device" && return 0
+ fi
+ stopall
+
+ reformat
+
+ start_mgs
+ start_ost
+ start_ost2
+ start_mds
+ wait_osc_import_state mds ost2 FULL
+
+ stop_ost
+ stop_ost2
+ stop_mds
+ stop_mgs
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
+}
+run_test 21d "start mgs then ost and then mds"
+
test_22() {
start_mds
}
test_24a() {
- #set up fs1
- gen_config
-
- #set up fs2
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
- [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
+ [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
+
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
if [ -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
done
+ # quotacheck should not fail immediately after deactivate
+ [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
+
# test new client starts deactivated
umount_client $MOUNT || return 200
mount_client $MOUNT
echo "New client success: got $RESULT"
fi
+ # quotacheck should not fail after umount/mount operation
+ [ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
+
# make sure it reactivates
set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
run_test 35b "Continue reconnection retries, if the active server is busy"
test_36() { # 12743
- local rc
+ [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
+
+ [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
+ { skip "remote OST" && return 0; }
+
+ local rc=0
local FSNAME2=test1234
local fs3ost_HOST=$ost_HOST
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
- rc=0
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
- do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
+ is_blkdev $SINGLEMDS $MDSDEV && \
skip_env "mixed loopback and real device not working" && return
fi
- [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
-
- [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
- { skip "remote OST" && return 0; }
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
run_test 36 "df report consistency on OSTs with different block size"
test_37() {
- client_only && skip "client only testing" && return 0
- LOCAL_MDSDEV="$TMP/mdt.img"
- SYM_MDSDEV="$TMP/sym_mdt.img"
+ local mntpt=$(facet_mntpt $SINGLEMDS)
+ local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
+ local mdsdev_sym="$TMP/sym_mdt.img"
+
+ echo "MDS : $mdsdev"
+ echo "SYMLINK : $mdsdev_sym"
+ do_facet $SINGLEMDS rm -f $mdsdev_sym
- echo "MDS : $LOCAL_MDSDEV"
- echo "SYMLINK : $SYM_MDSDEV"
- rm -f $LOCAL_MDSDEV
+ do_facet $SINGLEMDS ln -s $mdsdev $mdsdev_sym
- touch $LOCAL_MDSDEV
- mkfs.lustre --reformat --fsname=lustre --mdt --mgs --device-size=9000 $LOCAL_MDSDEV ||
- error "mkfs.lustre $LOCAL_MDSDEV failed"
- ln -s $LOCAL_MDSDEV $SYM_MDSDEV
+ echo "mount symlink device - $mdsdev_sym"
- echo "mount symlink device - $SYM_MDSDEV"
+ local rc=0
+ mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $MDS_MOUNT_OPTS $mdsdev_sym $mntpt 2>&1 )
+ rc=${PIPESTATUS[0]}
- mount_op=`mount -v -t lustre -o loop $SYM_MDSDEV ${MOUNT%/*}/mds 2>&1 | grep "unable to set tunable"`
- umount -d ${MOUNT%/*}/mds
- rm -f $LOCAL_MDSDEV $SYM_MDSDEV
+ echo mount_op=$mount_op
- if [ -n "$mount_op" ]; then
- error "**** FAIL: set tunables failed for symlink device"
+ do_facet $SINGLEMDS "umount -d $mntpt && rm -f $mdsdev_sym"
+
+ if $(echo $mount_op | grep -q "unable to set tunable"); then
+ error "set tunables failed for symlink device"
fi
+
+ [ $rc -eq 0 ] || error "mount symlink $mdsdev_sym failed! rc=$rc"
+
return 0
}
run_test 37 "verify set tunables works for symlink device"
test_40() { # bug 15759
start_ost
#define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
- do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
+ do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000706"
start_mds
cleanup
}
run_test 40 "race during service thread startup"
-test_41() { #bug 14134
+test_41a() { #bug 14134
+ echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+
local rc
local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
unload_modules_conf || return 204
return $rc
}
-run_test 41 "mount mds with --nosvc and --nomgs"
+run_test 41a "mount mds with --nosvc and --nomgs"
+
+test_41b() {
+ echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+
+ stopall
+ reformat
+ local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ start_ost
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
+ mkdir -p $MOUNT
+ mount_client $MOUNT || return 1
+ sleep 5
+
+ echo "blah blah" > $MOUNT/$tfile
+ cat $MOUNT/$tfile || return 200
+
+ umount_client $MOUNT
+ stop_ost || return 201
+ stop_mds -f || return 202
+ stop_mds -f || return 203
+
+}
+
+run_test 41b "mount mds with --nosvc and --nomgs on first mount"
test_42() { #bug 14693
setup
check_mount || return 2
umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 50c "lazystatfs one server down =========================="
umount_client $MOUNT || error "Unable to unmount client"
stop_ost2 || error "Unable to stop OST2"
stop_mds || error "Unable to stop MDS"
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 50d "lazystatfs client/server conn race =========================="
wait $pid
stop_ost2 || return 3
cleanup
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
- # Check that we can lower min/max
- do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin - 1))"
+ # Check that we can change min/max
+ do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + 1))"
do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 1))"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
- lassert 25 "$msg" '(($tmin2 == ($tmin - 1) && $tmax2 == ($tmax -1)))' || return $?
+ lassert 25 "$msg" '(($tmin2 == ($tmin + 1) && $tmax2 == ($tmax -1)))' || return $?
# Check that we can set min/max to the same value
- do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 1))"
+ tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$tmin"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
- lassert 26 "$msg" '(($tmin2 == ($tmin - 1) && $tmax2 == ($tmin - 1)))' || return $?
+ lassert 26 "$msg" '(($tmin2 == $tmin && $tmax2 == $tmin))' || return $?
# Check that we can't set max < min
- do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 2))"
+ do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 1))"
tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
lassert 27 "$msg" '(($tmin2 <= $tmax2))' || return $?
}
run_test 56 "check big indexes"
-test_57() { # bug 22656
+test_57a() { # bug 22656
local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
writeconf
do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
start_mgsmds
start_ost && error "OST registration from failnode should fail"
- stop_mds
reformat
}
-run_test 57 "initial registration from failnode should fail (should return errs)"
+run_test 57a "initial registration from failnode should fail (should return errs)"
+
+test_57b() {
+ local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+ writeconf
+ do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" || error "tunefs failed"
+ start_mgsmds
+ start_ost || error "OST registration from servicenode should not fail"
+ reformat
+}
+run_test 57b "initial registration from servicenode should not fail"
count_osts() {
do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
}
+test_58() { # bug 22658
+ [ "$FSTYPE" != "ldiskfs" ] && skip "not supported for $FSTYPE" && return
+ setup
+ mkdir -p $DIR/$tdir
+ createmany -o $DIR/$tdir/$tfile-%d 100
+ # make sure that OSTs do not cancel llog cookies before we unmount the MDS
+#define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
+ do_facet mds "lctl set_param fail_loc=0x601"
+ unlinkmany $DIR/$tdir/$tfile-%d 100
+ stop mds
+ local MNTDIR=$(facet_mntpt mds)
+ # remove all files from the OBJECTS dir
+ do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
+ do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
+ do_facet mds "umount $MNTDIR"
+ # restart MDS with missing llog files
+ start_mds
+ do_facet mds "lctl set_param fail_loc=0"
+ reformat
+}
+run_test 58 "missing llog files must not prevent MDT from mounting"
+
test_59() {
start_mgsmds >> /dev/null
local C1=$(count_osts)
[ $C4 -eq 2 ] || error "OST2 writeconf should add log"
stop_ost2 >> /dev/null
cleanup_nocli >> /dev/null
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 59 "writeconf mount option"
-
-test_58() { # bug 22658
- [ "$FSTYPE" != "ldiskfs" ] && skip "not supported for $FSTYPE" && return
- setup
- mkdir -p $DIR/$tdir
- createmany -o $DIR/$tdir/$tfile-%d 100
- # make sure that OSTs do not cancel llog cookies before we unmount the MDS
-#define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
- do_facet mds "lctl set_param fail_loc=0x601"
- unlinkmany $DIR/$tdir/$tfile-%d 100
- stop mds
- local MNTDIR=$(facet_mntpt mds)
- # remove all files from the OBJECTS dir
- do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
- do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
- do_facet mds "umount $MNTDIR"
- # restart MDS with missing llog files
- start_mds
- do_facet mds "lctl set_param fail_loc=0"
- reformat
-}
-run_test 58 "missing llog files must not prevent MDT from mounting"
-
if ! combined_mgs_mds ; then
stop mgs
fi
+
cleanup_gss
-equals_msg `basename $0`: test complete
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true
+
+complete $(basename $0) $SECONDS
+exit_status
git://git.whamcloud.com / fs / lustre-release.git / blobdiff