ONLY=${ONLY:-"$*"}
-# These tests don't apply to mountconf
-MOUNTCONFSKIP="10 11 12 13 13b 14 15"
-# bug number for skipped test: 13739
-HEAD_EXCEPT=" 32a 32b "
+# bug number for skipped test: 13739
+HEAD_EXCEPT=" 32a 32b"
-# bug number for skipped test: 13709 10510 12743
-ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $MOUNTCONFSKIP $HEAD_EXCEPT 22 23 36"
+# bug number for skipped test:
+ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $HEAD_EXCEPT"
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
-#
-[ "$SLOW" = "no" ] && EXCEPT="$EXCEPT 0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a "
-
SRCDIR=`dirname $0`
PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
SAVE_PWD=$PWD
LUSTRE=${LUSTRE:-`dirname $0`/..}
RLUSTRE=${RLUSTRE:-$LUSTRE}
-MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
-MKFSLUSTRE=${MKFSLUSTRE:-/usr/sbin/mkfs.lustre}
-HOSTNAME=`hostname`
. $LUSTRE/tests/test-framework.sh
init_test_env $@
+# STORED_MDSSIZE is used in test_18
+if [ -n "$MDSSIZE" ]; then
+ STORED_MDSSIZE=$MDSSIZE
+fi
# use small MDS + OST size to speed formatting time
MDSSIZE=40000
OSTSIZE=40000
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+
+remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
+remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
+
+#
+[ "$SLOW" = "no" ] && EXCEPT_SLOW="0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a 45"
+
+assert_DIR
reformat() {
formatall
}
writeconf() {
- local facet=mds
+ local facet=$SINGLEMDS
+ local dev=${facet}_dev
shift
stop ${facet} -f
rm -f ${facet}active
# who knows if/where $TUNEFS is installed? Better reformat if it fails...
- do_facet ${facet} "$TUNEFS --writeconf $MDSDEV" || echo "tunefs failed, reformatting instead" && reformat
+ do_facet ${facet} "$TUNEFS --writeconf ${!dev}" || echo "tunefs failed, reformatting instead" && reformat
}
gen_config() {
}
start_mds() {
- echo "start mds service on `facet_active_host mds`"
- start mds $MDSDEV $MDS_MOUNT_OPTS || return 94
+ local facet=$SINGLEMDS
+ # we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
+ local num=$(echo $facet | tr -d "mds")
+ local dev=$(mdsdevname $num)
+ echo "start mds service on `facet_active_host $facet`"
+ start $facet ${dev} $MDS_MOUNT_OPTS || return 94
}
stop_mds() {
- echo "stop mds service on `facet_active_host mds`"
+ echo "stop mds service on `facet_active_host $SINGLEMDS`"
# These tests all use non-failover stop
- stop mds -f || return 97
+ stop $SINGLEMDS -f || return 97
}
start_ost() {
}
manual_umount_client(){
+ local rc
+ local FORCE=$1
echo "manual umount lustre on ${MOUNT}...."
- do_facet client "umount -d $MOUNT"
+ do_facet client "umount -d ${FORCE} $MOUNT"
+ rc=$?
+ return $rc
}
setup() {
gen_config
-init_krb5_env
+init_gss
test_0() {
setup
test_2() {
start_ost
- start_mds
+ start_mds
echo "start mds second time.."
start_mds
mount_client $MOUNT
}
run_test 4 "force cleanup ost, then cleanup"
-test_5() {
+test_5a() { # was test_5
setup
touch $DIR/$tfile || return 1
+ fuser -m -v $MOUNT && echo "$MOUNT is in use by user space process."
+
stop_mds -f || return 2
# cleanup may return an error from the failed
kill -TERM $UMOUNT_PID
echo "waiting for umount to finish"
wait $UMOUNT_PID
- if grep " $MOUNT " /etc/mtab; then
- echo "test 5: mtab after failed umount"
+ if grep " $MOUNT " /proc/mounts; then
+ echo "test 5: /proc/mounts after failed umount"
umount $MOUNT &
UMOUNT_PID=$!
sleep 2
kill -TERM $UMOUNT_PID
echo "waiting for umount to finish"
wait $UMOUNT_PID
- grep " $MOUNT " /etc/mtab && echo "test 5: mtab after second umount" && return 11
+ grep " $MOUNT " /proc/mounts && echo "test 5: /proc/mounts after second umount" && return 11
fi
manual_umount_client
# df may have lingering entry
manual_umount_client
# mtab may have lingering entry
- grep -v $MOUNT" " /etc/mtab > $TMP/mtabtemp
- mv $TMP/mtabtemp /etc/mtab
+ local WAIT=0
+ local MAX_WAIT=20
+ local sleep=1
+ while [ "$WAIT" -ne "$MAX_WAIT" ]; do
+ sleep $sleep
+ grep -q $MOUNT" " /etc/mtab || break
+ echo "Waiting /etc/mtab updated ... "
+ WAIT=$(( WAIT + sleep))
+ done
+ [ "$WAIT" -eq "$MAX_WAIT" ] && error "/etc/mtab is not updated in $WAIT secs"
+ echo "/etc/mtab updated in $WAIT secs"
}
-run_test 5 "force cleanup mds, then cleanup"
+run_test 5a "force cleanup mds, then cleanup"
test_5b() {
start_ost
grep " $MOUNT " /etc/mtab && echo "test 5b: mtab before mount" && return 10
mount_client $MOUNT && return 1
grep " $MOUNT " /etc/mtab && echo "test 5b: mtab after failed mount" && return 11
- umount_client $MOUNT
+ umount_client $MOUNT
# stop_mds is a no-op here, and should not fail
cleanup_nocli || return $?
return 0
start_mds
[ -d $MOUNT ] || mkdir -p $MOUNT
grep " $MOUNT " /etc/mtab && echo "test 5c: mtab before mount" && return 10
- mount -t lustre $MGSNID:/wrong.$FSNAME $MOUNT || :
+ local oldfs="${FSNAME}"
+ FSNAME="wrong.${FSNAME}"
+ mount_client $MOUNT || :
+ FSNAME=${oldfs}
grep " $MOUNT " /etc/mtab && echo "test 5c: mtab after failed mount" && return 11
umount_client $MOUNT
cleanup_nocli || return $?
start_mds
#define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
- do_facet client "sysctl -w lustre.fail_loc=0x80000506"
+ do_facet client "lctl set_param fail_loc=0x80000506"
grep " $MOUNT " /etc/mtab && echo "test 5e: mtab before mount" && return 10
mount_client $MOUNT || echo "mount failed (not fatal)"
cleanup || return $?
test_9() {
start_ost
- do_facet ost1 sysctl lnet.debug=\'inode trace\' || return 1
- do_facet ost1 sysctl lnet.subsystem_debug=\'mds ost\' || return 1
+ do_facet ost1 lctl set_param debug=\'inode trace\' || return 1
+ do_facet ost1 lctl set_param subsystem_debug=\'mds ost\' || return 1
- CHECK_PTLDEBUG="`do_facet ost1 sysctl -n lnet.debug`"
- if [ "$CHECK_PTLDEBUG" ] && [ "$CHECK_PTLDEBUG" = "trace inode" ];then
+ CHECK_PTLDEBUG="`do_facet ost1 lctl get_param -n debug`"
+ if [ "$CHECK_PTLDEBUG" ] && { \
+ [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
+ [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
echo "lnet.debug success"
else
echo "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
return 1
fi
- CHECK_SUBSYS="`do_facet ost1 sysctl -n lnet.subsystem_debug`"
+ CHECK_SUBSYS="`do_facet ost1 lctl get_param -n subsystem_debug`"
if [ "$CHECK_SUBSYS" ] && [ "$CHECK_SUBSYS" = "mds ost" ]; then
echo "lnet.subsystem_debug success"
else
run_test 9 "test ptldebug and subsystem for mkfs"
-test_10() {
- echo "generate configuration with the same name for node and mds"
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="broken.xml"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- facet="mds"
- rm -f ${facet}active
- add_facet $facet
- echo "the name for node and mds is the same"
- do_lmc --add mds --node ${facet}_facet --mds ${facet}_facet \
- --dev $MDSDEV --size $MDSSIZE || return $?
- do_lmc --add lov --mds ${facet}_facet --lov lov1 --stripe_sz \
- $STRIPE_BYTES --stripe_cnt $STRIPES_PER_OBJ \
- --stripe_pattern 0 || return $?
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
- facet="client"
- add_facet $facet --lustre_upcall $UPCALL
- do_lmc --add mtpt --node ${facet}_facet --mds mds_facet \
- --lov lov1 --path $MOUNT
-
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT
- check_mount || return 41
- cleanup || return $?
-
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 10 "mount lustre with the same name for node and mds"
-
-test_11() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf11.xml"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT --ost ost_svc || return $?
- echo "Default lov config success!"
-
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_ost ost --dev $OSTDEV --size $OSTSIZE
- add_client client mds --path $MOUNT && return $?
- echo "--add mtpt with neither --lov nor --ost will return error"
-
- echo ""
- echo "Success!"
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 11 "use default lov configuration (should return error)"
-
-test_12() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="batch.xml"
- BATCHFILE="batchfile"
-
- # test double quote
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- [ -f "$BATCHFILE" ] && rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128\"" >> $BATCHFILE
- # --mkfsoptions "-I 128"
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched double quote success"
- else
- echo "matched double quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \"-I 128" >> $BATCHFILE
- # --mkfsoptions "-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched double quote should return error"
-
- # test single quote
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128'" >> $BATCHFILE
- # --mkfsoptions '-I 128'
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "matched single quote success"
- else
- echo "matched single quote fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions '-I 128" >> $BATCHFILE
- # --mkfsoptions '-I 128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "unmatched single quote should return error"
-
- # test backslash
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions \-\I\ \128" >> $BATCHFILE
- # --mkfsoptions \-\I\ \128
- do_lmc -m $XMLCONFIG --batch $BATCHFILE || return $?
- if [ `sed -n '/>-I 128</p' $XMLCONFIG | wc -l` -eq 1 ]; then
- echo "backslash followed by a whitespace/letter success"
- else
- echo "backslash followed by a whitespace/letter fail"
- return 1
- fi
- rm -f $XMLCONFIG
- rm -f $BATCHFILE
- echo "--add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp" > $BATCHFILE
- echo "--add mds --node $HOSTNAME --mds mds1 --mkfsoptions -I\ 128\\" >> $BATCHFILE
- # --mkfsoptions -I\ 128\
- do_lmc -m $XMLCONFIG --batch $BATCHFILE && return $?
- echo "backslash followed by nothing should return error"
-
- rm -f $BATCHFILE
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 12 "lmc --batch, with single/double quote, backslash in batchfile"
-
-test_13() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
-
- # check long uuid will be truncated properly and uniquely
- echo "To generate XML configuration file(with long ost name): $XMLCONFIG"
- [ -f "$XMLCONFIG" ] && rm -f $XMLCONFIG
- do_lmc --add net --node $HOSTNAME --nid $HOSTNAME --nettype tcp
- do_lmc --add mds --node $HOSTNAME --mds mds1_name_longer_than_31characters
- do_lmc --add mds --node $HOSTNAME --mds mds2_name_longer_than_31characters
- if [ ! -f "$XMLCONFIG" ]; then
- echo "Error:no file $XMLCONFIG created!"
- return 1
- fi
- EXPECTEDMDS1UUID="e_longer_than_31characters_UUID"
- EXPECTEDMDS2UUID="longer_than_31characters_UUID_2"
- FOUNDMDS1UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '1p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- FOUNDMDS2UUID=`awk -F"'" '/<mds .*uuid=/' $XMLCONFIG | sed -n '2p' \
- | sed "s/ /\n\r/g" | awk -F"'" '/uuid=/{print $2}'`
- [ -z "$FOUNDMDS1UUID" ] && echo "MDS1 UUID empty" && return 1
- [ -z "$FOUNDMDS2UUID" ] && echo "MDS2 UUID empty" && return 1
- if ([ $EXPECTEDMDS1UUID = $FOUNDMDS1UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS2UUID ]) || \
- ([ $EXPECTEDMDS1UUID = $FOUNDMDS2UUID ] && [ $EXPECTEDMDS2UUID = $FOUNDMDS1UUID ]); then
- echo "Success:long uuid truncated successfully and being unique."
- else
- echo "Error:expected uuid for mds1 and mds2: $EXPECTEDMDS1UUID; $EXPECTEDMDS2UUID"
- echo "but: found uuid for mds1 and mds2: $FOUNDMDS1UUID; $FOUNDMDS2UUID"
- return 1
- fi
- rm -f $XMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13 "check new_uuid of lmc operating correctly"
-
-test_13b() {
- OLDXMLCONFIG=$XMLCONFIG
- XMLCONFIG="conf13-1.xml"
- SECONDXMLCONFIG="conf13-2.xml"
- # check multiple invocations for lmc generate same XML configuration file
- rm -f $XMLCONFIG
- echo "Generate the first XML configuration file"
- gen_config
- echo "mv $XMLCONFIG to $SECONDXMLCONFIG"
- sed -e "s/mtime[^ ]*//" $XMLCONFIG > $SECONDXMLCONFIG || return $?
- echo "Generate the second XML configuration file"
- gen_config
- # don't compare .xml mtime, it will always be different
- if [ `sed -e "s/mtime[^ ]*//" $XMLCONFIG | diff - $SECONDXMLCONFIG | wc -l` -eq 0 ]; then
- echo "Success:multiple invocations for lmc generate same XML file"
- else
- echo "Error: multiple invocations for lmc generate different XML file"
- return 1
- fi
-
- rm -f $XMLCONFIG $SECONDXMLCONFIG
- XMLCONFIG=$OLDXMLCONFIG
-}
-run_test 13b "check lmc generates consistent .xml file"
-
-test_14() {
- rm -f $XMLCONFIG
-
- # create xml file with --mkfsoptions for ost
- echo "create xml file with --mkfsoptions for ost"
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE \
- --mkfsoptions "-Llabel_conf_14"
- add_client client mds --lov lov1 --path $MOUNT
-
- FOUNDSTRING=`awk -F"<" '/<mkfsoptions>/{print $2}' $XMLCONFIG`
- EXPECTEDSTRING="mkfsoptions>-Llabel_conf_14"
- if [ "$EXPECTEDSTRING" != "$FOUNDSTRING" ]; then
- echo "Error: expected: $EXPECTEDSTRING; found: $FOUNDSTRING"
- return 1
- fi
- echo "Success:mkfsoptions for ost written to xml file correctly."
-
- # mount lustre to test lconf mkfsoptions-parsing
- echo "mount lustre"
- start_ost
- start_mds
- mount_client $MOUNT || return $?
- if [ -z "`do_facet ost1 dumpe2fs -h $OSTDEV | grep label_conf_14`" ]; then
- echo "Error: the mkoptions not applied to mke2fs of ost."
- return 1
- fi
- cleanup
- echo "lconf mkfsoptions for ost success"
-
- gen_config
-}
-run_test 14 "test mkfsoptions of ost for lmc and lconf"
-
-cleanup_15() {
- trap 0
- [ -f $MOUNTLUSTRE ] && echo "remove $MOUNTLUSTRE" && rm -f $MOUNTLUSTRE
- if [ -f $MOUNTLUSTRE.sav ]; then
- echo "return original $MOUNTLUSTRE.sav to $MOUNTLUSTRE"
- mv $MOUNTLUSTRE.sav $MOUNTLUSTRE
- fi
-}
-
-# this only tests the kernel mount command, not anything about lustre.
-test_15() {
- MOUNTLUSTRE=${MOUNTLUSTRE:-/sbin/mount.lustre}
- start_ost
- start_mds
-
- echo "mount lustre on ${MOUNT} without $MOUNTLUSTRE....."
- if [ -f "$MOUNTLUSTRE" ]; then
- echo "save $MOUNTLUSTRE to $MOUNTLUSTRE.sav"
- mv $MOUNTLUSTRE $MOUNTLUSTRE.sav && trap cleanup_15 EXIT INT
- if [ -f $MOUNTLUSTRE ]; then
- skip "$MOUNTLUSTRE cannot be moved, skipping test"
- return 0
- fi
- fi
-
- mount_client $MOUNT && error "mount succeeded" && return 1
- echo "mount lustre on $MOUNT without $MOUNTLUSTRE failed as expected"
- cleanup_15
- cleanup || return $?
-}
-run_test 15 "zconf-mount without /sbin/mount.lustre (should return error)"
-
# LOGS/PENDING do not exist anymore since CMD3
test_16() {
- TMPMTPT="${MOUNT%/*}/conf16"
-
+ local TMPMTPT="${TMP}/conf16"
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
if [ ! -e "$MDSDEV" ]; then
log "no $MDSDEV existing, so mount Lustre to create one"
setup
[ -f "$MDSDEV" ] && LOOPOPT="-o loop"
log "change the mode of $MDSDEV/OBJECTS to 555"
- do_facet mds "mkdir -p $TMPMTPT &&
+ do_facet $SINGLEMDS "mkdir -p $TMPMTPT &&
mount $LOOPOPT -t $FSTYPE $MDSDEV $TMPMTPT &&
chmod 555 $TMPMTPT/OBJECTS &&
umount $TMPMTPT" || return $?
cleanup || return $?
log "read the mode of OBJECTS and check if they has been changed properly"
- EXPECTEDOBJECTSMODE=`do_facet mds "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
+ EXPECTEDOBJECTSMODE=`do_facet $SINGLEMDS "debugfs -R 'stat OBJECTS' $MDSDEV 2> /dev/null" | grep 'Mode: ' | sed -e "s/.*Mode: *//" -e "s/ *Flags:.*//"`
if [ "$EXPECTEDOBJECTSMODE" = "0777" ]; then
log "Success:Lustre change the mode of OBJECTS correctly"
run_test 16 "verify that lustre will correct the mode of OBJECTS"
test_17() {
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
if [ ! -e "$MDSDEV" ]; then
echo "no $MDSDEV existing, so mount Lustre to create one"
setup
fi
echo "Remove mds config log"
- do_facet mds "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
+ do_facet $SINGLEMDS "debugfs -w -R 'unlink CONFIGS/$FSNAME-MDT0000' $MDSDEV || return \$?" || return $?
start_ost
start_mds && return 42
run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
test_18() {
- [ -f $MDSDEV ] && echo "remove $MDSDEV" && rm -f $MDSDEV
+ [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
+
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
+ local MIN=2000000
+
+ local OK=
+ # check if current MDSSIZE is large enough
+ [ $MDSSIZE -ge $MIN ] && OK=1 && myMDSSIZE=$MDSSIZE && \
+ log "use MDSSIZE=$MDSSIZE"
+
+ # check if the global config has a large enough MDSSIZE
+ [ -z "$OK" -a ! -z "$STORED_MDSSIZE" ] && [ $STORED_MDSSIZE -ge $MIN ] && \
+ OK=1 && myMDSSIZE=$STORED_MDSSIZE && \
+ log "use STORED_MDSSIZE=$STORED_MDSSIZE"
+
+ # check if the block device is large enough
+ [ -z "$OK" -a -b $MDSDEV ] && \
+ [ "$(dd if=$MDSDEV of=/dev/null bs=1k count=1 skip=$MIN 2>&1 |
+ awk '($3 == "in") { print $1 }')" = "1+0" ] && OK=1 && \
+ myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
+
+ # check if a loopback device has enough space for fs metadata (5%)
+ [ -z "$OK" ] && [ -f $MDSDEV -o ! -e $MDSDEV ] &&
+ SPACE=$(df -P $(dirname $MDSDEV) |
+ awk '($1 != "Filesystem") {print $4}') &&
+ [ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
+ log "use file $MDSDEV with MIN=$MIN"
+
+ [ -z "$OK" ] && skip "$MDSDEV too small for ${MIN}kB MDS" && return
+
+
echo "mount mds with large journal..."
- local myMDSSIZE=2000000
- OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
+ local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
check_mount || return 41
echo "check journal size..."
- FOUNDSIZE=`do_facet mds "debugfs -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
+ local FOUNDSIZE=`do_facet mds "debugfs -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}'`
if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
else
stop_ost
stop_ost2
stop_mds
+ #writeconf to remove all ost2 traces for subsequent tests
+ writeconf
}
run_test 21c "start mds between two osts, stop mds last"
test_22() {
- #reformat to remove all logs
- reformat
start_mds
echo Client mount before any osts are in the logs
mount_client $MOUNT
echo Client mount with a running ost
start_ost
+ if $GSS; then
+ # if gss enabled, wait full time to let connection from
+ # mds to ost be established, due to the mismatch between
+ # initial connect timeout and gss context negotiation timeout.
+ # This perhaps could be remove after AT landed.
+ echo "sleep $((TIMEOUT + TIMEOUT + TIMEOUT))s"
+ sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
+ fi
mount_client $MOUNT
check_mount || return 41
pass
}
run_test 22 "start a client before osts (should return errs)"
-test_23() {
+test_23a() { # was test_23
setup
# fail mds
- stop mds
+ stop $SINGLEMDS
# force down client so that recovering mds waits for reconnect
- zconf_umount `hostname` $MOUNT -f
+ local running=$(grep -c $MOUNT /proc/mounts) || true
+ if [ $running -ne 0 ]; then
+ echo "Stopping client $MOUNT (opts: -f)"
+ umount -f $MOUNT
+ fi
+
# enter recovery on mds
start_mds
# try to start a new client
mount_client $MOUNT &
- MOUNT_PID=$!
sleep 5
+ MOUNT_PID=$(ps -ef | grep "t lustre" | grep -v grep | awk '{print $2}')
MOUNT_LUSTRE_PID=`ps -ef | grep mount.lustre | grep -v grep | awk '{print $2}'`
echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
ps --ppid $MOUNT_PID
ps --ppid $MOUNT_LUSTRE_PID
# FIXME why o why can't I kill these? Manual "ctrl-c" works...
- kill -TERM $MOUNT_PID
+ kill -TERM $MOUNT_LUSTRE_PID
echo "waiting for mount to finish"
ps -ef | grep mount
- wait $MOUNT_PID
+ # we can not wait $MOUNT_PID because it is not a child of this shell
+ local PID1
+ local PID2
+ local WAIT=0
+ local MAX_WAIT=20
+ local sleep=1
+ while [ "$WAIT" -lt "$MAX_WAIT" ]; do
+ sleep $sleep
+ PID1=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_PID)
+ PID2=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_LUSTRE_PID)
+ echo PID1=$PID1
+ echo PID2=$PID2
+ [ -z "$PID1" -a -z "$PID2" ] && break
+ echo "waiting for mount to finish ... "
+ WAIT=$(( WAIT + sleep))
+ done
+ [ "$WAIT" -eq "$MAX_WAIT" ] && error "MOUNT_PID $MOUNT_PID and \
+ MOUNT__LUSTRE_PID $MOUNT__LUSTRE_PID still not killed in $WAIT secs"
+ ps -ef | grep mount
+ stop_mds || error
+ stop_ost || error
+}
+run_test 23a "interrupt client during recovery mount delay"
- stop_mds
- stop_ost
+umount_client $MOUNT
+cleanup_nocli
+
+test_23b() { # was test_23
+ start_ost
+ start_mds
+ # Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
+ lctl set_param fail_loc=0x80000313
+ mount_client $MOUNT
+ cleanup
+}
+run_test 23b "Simulate -EINTR during mount"
+
+fs2mds_HOST=$mds_HOST
+fs2ost_HOST=$ost_HOST
+
+cleanup_24a() {
+ trap 0
+ echo "umount $MOUNT2 ..."
+ umount $MOUNT2 || true
+ echo "stopping fs2mds ..."
+ stop fs2mds -f || true
+ echo "stopping fs2ost ..."
+ stop fs2ost -f || true
}
-#this test isn't working yet
-#run_test 23 "interrupt client during recovery mount delay"
test_24a() {
#set up fs1
gen_config
#set up fs2
- local fs2mds_HOST=$mds_HOST
- local fs2ost_HOST=$ost_HOST
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2ostdev || exit 10
setup
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
mkdir -p $MOUNT2
mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
umount_client $MOUNT
# the MDS must remain up until last MDT
stop_mds
- MDS=$(do_facet $SINGLEMDS "cat $LPROC/devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+ MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
[ -z "$MDS" ] && error "No MDT" && return 8
- umount $MOUNT2
- stop fs2mds -f
- stop fs2ost -f
+ cleanup_24a
cleanup_nocli || return 6
}
run_test 24a "Multiple MDTs on a single node"
test_24b() {
- local fs2mds_HOST=$mds_HOST
if [ -z "$fs2mds_DEV" ]; then
do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
skip "mixed loopback and real device not working" && return
test_26() {
load_modules
# we need modules before mount for sysctl, so make sure...
- do_facet mds "lsmod | grep -q lustre || modprobe lustre"
+ do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
#define OBD_FAIL_MDS_FS_SETUP 0x135
- do_facet mds "sysctl -w lustre.fail_loc=0x80000135"
+ do_facet $SINGLEMDS "lctl set_param fail_loc=0x80000135"
start_mds && echo MDS started && return 1
- cat $LPROC/devices
- DEVS=$(cat $LPROC/devices | wc -l)
+ lctl get_param -n devices
+ DEVS=$(lctl get_param -n devices | wc -l)
[ $DEVS -gt 0 ] && return 2
unload_modules || return 203
}
FINAL=$(($ORIG + 5))
fi
echo "Setting $PARAM from $ORIG to $FINAL"
- do_facet mds "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
+ do_facet $SINGLEMDS "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
local RESULT
local MAX=90
local WAIT=0
start_mds || return 2
echo "Requeue thread should have started: "
ps -e | grep ll_cfg_requeue
- set_and_check ost1 "cat $LPROC/obdfilter/$FSNAME-OST0000/client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
+ set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
cleanup_nocli
}
run_test 27a "Reacquire MGS lock if OST started first"
test_27b() {
+ # FIXME. ~grev
setup
- facet_failover mds
- set_and_check mds "cat $LPROC/mdt/$FSNAME-MDT0000/identity_acquire_expire" "$FSNAME-MDT0000.mdt.identity_acquire_expire" || return 3
- set_and_check client "cat $LPROC/mdc/$FSNAME-MDT0000-mdc-*/max_rpcs_in_flight" "$FSNAME-MDT0000.mdc.max_rpcs_in_flight" || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+
+ facet_failover $SINGLEMDS
+ set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
+ set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
+ check_mount
cleanup
}
run_test 27b "Reacquire MGS lock after failover"
test_28() {
setup
- TEST="cat $LPROC/llite/$FSNAME-*/max_read_ahead_whole_mb"
- ORIG=$($TEST)
- declare -i FINAL
- FINAL=$(($ORIG + 10))
- set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" || return 3
- set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" || return 3
+ TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
+ PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
+ ORIG=$($TEST)
+ FINAL=$(($ORIG + 1))
+ set_and_check client "$TEST" "$PARAM" $FINAL || return 3
+ FINAL=$(($FINAL + 1))
+ set_and_check client "$TEST" "$PARAM" $FINAL || return 4
umount_client $MOUNT || return 200
mount_client $MOUNT
RESULT=$($TEST)
else
echo "New config success: got $RESULT"
fi
+ set_and_check client "$TEST" "$PARAM" $ORIG || return 5
cleanup
}
run_test 28 "permanent parameter setting"
sleep 10
local PARAM="$FSNAME-OST0001.osc.active"
- local PROC_ACT="$LPROC/osc/$FSNAME-OST0001-osc-[^M]*/active"
- local PROC_UUID="$LPROC/osc/$FSNAME-OST0001-osc-[^M]*/ost_server_uuid"
- if [ ! -r $PROC_ACT ]; then
- echo "Can't read $PROC_ACT"
- ls $LPROC/osc/$FSNAME-*
- return 1
- fi
- ACTV=$(cat $PROC_ACT)
+ local PROC_ACT="osc.$FSNAME-OST0001-osc-[^M]*.active"
+ local PROC_UUID="osc.$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
+
+ ACTV=$(lctl get_param -n $PROC_ACT)
DEAC=$((1 - $ACTV))
- set_and_check client "cat $PROC_ACT" "$PARAM" $DEAC || return 2
+ set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
# also check ost_server_uuid status
- RESULT=$(grep DEACTIV $PROC_UUID)
+ RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV)
if [ -z "$RESULT" ]; then
- echo "Live client not deactivated: $(cat $PROC_UUID)"
+ echo "Live client not deactivated: $(lctl get_param -n $PROC_UUID)"
return 3
else
echo "Live client success: got $RESULT"
fi
# check MDT too
- local MPROC="$LPROC/osc/$FSNAME-OST0001-osc-[M]*/active"
+ local MPROC="osc.$FSNAME-OST0001-osc-[M]*.active"
local MAX=30
local WAIT=0
while [ 1 ]; do
sleep 5
- RESULT=`do_facet mds " [ -r $MPROC ] && cat $MPROC"`
+ RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
[ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
if [ $RESULT -eq $DEAC ]; then
echo "MDT deactivated also after $WAIT sec (got $RESULT)"
# test new client starts deactivated
umount_client $MOUNT || return 200
mount_client $MOUNT
- RESULT=$(grep DEACTIV $PROC_UUID | grep NEW)
+ RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
if [ -z "$RESULT" ]; then
- echo "New client not deactivated from start: $(cat $PROC_UUID)"
+ echo "New client not deactivated from start: $(lctl get_param -n $PROC_UUID)"
return 5
else
echo "New client success: got $RESULT"
fi
# make sure it reactivates
- set_and_check client "cat $PROC_ACT" "$PARAM" $ACTV || return 6
+ set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
umount_client $MOUNT
stop_ost2
test_30() {
setup
- TEST="cat $LPROC/llite/$FSNAME-*/max_read_ahead_whole_mb"
- ORIG=$($TEST)
- for i in $(seq 1 20); do
+ TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
+ ORIG=$($TEST)
+ LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
+ for i in ${LIST[@]}; do
set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
done
# make sure client restart still works
run_test 31 "Connect to non-existent node (shouldn't crash)"
test_32a() {
- # XXX - make this run on client-only systems with real hardware on
- # the OST and MDT
- # there appears to be a lot of assumption here about loopback
- # devices
- # or maybe this test is just totally useless on a client-only system
+ # XXX - make this test verify 1.8 -> 2.0 upgrade is working
+ # XXX - make this run on client-only systems with real hardware on
+ # the OST and MDT
+ # there appears to be a lot of assumption here about loopback
+ # devices
+ # or maybe this test is just totally useless on a client-only system
+ [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
[ "$mds_HOST" = "`hostname`" ] || { skip "remote MDS" && return 0; }
[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
{ skip "remote OST" && return 0; }
- [ -z "$TUNEFS" ] && skip "No tunefs" && return
- local DISK1_4=$LUSTRE/tests/disk1_4.zip
- [ ! -r $DISK1_4 ] && skip "Cant find $DISK1_4, skipping" && return
+ [ -z "$TUNEFS" ] && skip "No tunefs" && return
+ local DISK1_8=$LUSTRE/tests/disk1_8.tgz
+ [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
+
mkdir -p $TMP/$tdir
- unzip -o -j -d $TMP/$tdir $DISK1_4 || { skip "Cant unzip $DISK1_4, skipping" && return ; }
+ tar xjvf $DISK1_8 -C $TMP/$tdir || \
+ { skip "Cannot untar $DISK1_8" && return 0; }
+
load_modules
- sysctl lnet.debug=$PTLDEBUG
+ lctl set_param debug=$PTLDEBUG
- $TUNEFS $TMP/$tdir/mds || error "tunefs failed"
+ $TUNEFS $tmpdir/mds || error "tunefs failed"
# nids are wrong, so client wont work, but server should start
- start mds $TMP/$tdir/mds "-o loop,exclude=lustre-OST0000" || return 3
- local UUID=$(cat $LPROC/mds/lustre-MDT0000/uuid)
+ start mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" || return 3
+ local UUID=$(lctl get_param -n mdt.lustre-MDT0000.uuid)
echo MDS uuid $UUID
[ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID"
- $TUNEFS --mgsnode=`hostname` $TMP/$tdir/ost1 || error "tunefs failed"
- start ost1 $TMP/$tdir/ost1 "-o loop" || return 5
- UUID=$(cat $LPROC/obdfilter/lustre-OST0000/uuid)
+ $TUNEFS --mgsnode=`hostname` $tmpdir/ost1 || error "tunefs failed"
+ start ost1 $tmpdir/ost1 "-o loop" || return 5
+ UUID=$(lctl get_param -n obdfilter.lustre-OST0000.uuid)
echo OST uuid $UUID
[ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID"
# With a new good MDT failover nid, we should be able to mount a client
# (but it cant talk to OST)
- local OLDMOUNTOPT=$MOUNTOPT
- MOUNTOPT="exclude=lustre-OST0000"
+ local OLDMOUNTOPT=$MOUNTOPT
+ MOUNTOPT="exclude=lustre-OST0000"
mount_client $MOUNT
MOUNTOPT=$OLDMOUNTOPT
- set_and_check client "cat $LPROC/mdc/*/max_rpcs_in_flight" "lustre-MDT0000.mdc.max_rpcs_in_flight" || return 11
+ set_and_check client "lctl get_param -n mdc.*.max_rpcs_in_flight" "lustre-MDT0000.mdc.max_rpcs_in_flight" ||
+ return 11
zconf_umount `hostname` $MOUNT -f
cleanup_nocli
+ load_modules
# mount a second time to make sure we didnt leave upgrade flag on
- $TUNEFS --dryrun $TMP/$tdir/mds || error "tunefs failed"
- start mds $TMP/$tdir/mds "-o loop,exclude=lustre-OST0000" || return 12
- cleanup_nocli
+ load_modules
+ $TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
+ load_modules
+ start mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" || return 12
+ cleanup_nocli
- [ -d $TMP/$tdir ] && rm -rf $TMP/$tdir
+ rm -rf $tmpdir || true # true is only for TMP on NFS
}
-run_test 32a "Upgrade from 1.4 (not live)"
+run_test 32a "Upgrade from 1.8 (not live)"
test_32b() {
- # XXX - make this run on client-only systems with real hardware on
- # the OST and MDT
- # there appears to be a lot of assumption here about loopback
- # devices
- # or maybe this test is just totally useless on a client-only system
- [ "$mds_HOST" = "`hostname`" ] || { skip "remote MDS" && return 0; }
- [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
+ # XXX - make this test verify 1.8 -> 2.0 upgrade is working
+ # XXX - make this run on client-only systems with real hardware on
+ # the OST and MDT
+ # there appears to be a lot of assumption here about loopback
+ # devices
+ # or maybe this test is just totally useless on a client-only system
+ [ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
+ [ "$mds_HOST" = "`hostname`" ] || { skip "remote MDS" && return 0; }
+ [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
{ skip "remote OST" && return 0; }
- [ -z "$TUNEFS" ] && skip "No tunefs" && return
- local DISK1_4=$LUSTRE/tests/disk1_4.zip
- [ ! -r $DISK1_4 ] && skip "Cant find $DISK1_4, skipping" && return
- mkdir -p $TMP/$tdir
- unzip -o -j -d $TMP/$tdir $DISK1_4 || { skip "Cant unzip $DISK1_4, skipping" && return ; }
+ [ -z "$TUNEFS" ] && skip "No tunefs" && return
+ local DISK1_8=$LUSTRE/tests/disk1_8.tgz
+ [ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
+ local tmpdir=$TMP/$tdir
+ mkdir -p $tmpdir
+ tar xjvf $DISK1_8 -C $tmpdir || \
+ { skip "Cannot untar $DISK1_8" && return ; }
+
load_modules
- sysctl lnet.debug=$PTLDEBUG
+ lctl set_param debug=$PTLDEBUG
+ NEWNAME=lustre
# writeconf will cause servers to register with their current nids
- $TUNEFS --writeconf $TMP/$tdir/mds || error "tunefs failed"
- start mds $TMP/$tdir/mds "-o loop" || return 3
- local UUID=$(cat $LPROC/mds/lustre-MDT0000/uuid)
+ $TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
+ start mds1 $tmpdir/mds "-o loop" || return 3
+ local UUID=$(lctl get_param -n mdt.${NEWNAME}-MDT0000.uuid)
echo MDS uuid $UUID
- [ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
- $TUNEFS --mgsnode=`hostname` $TMP/$tdir/ost1 || error "tunefs failed"
- start ost1 $TMP/$tdir/ost1 "-o loop" || return 5
- UUID=$(cat $LPROC/obdfilter/lustre-OST0000/uuid)
+ $TUNEFS --mgsnode=`hostname` --writeconf --fsname=$NEWNAME $tmpdir/ost1 || error "tunefs failed"
+ start ost1 $tmpdir/ost1 "-o loop" || return 5
+ UUID=$(lctl get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
echo OST uuid $UUID
- [ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID"
+ [ "$UUID" == "${NEWNAME}-OST0000_UUID" ] || error "UUID is wrong: $UUID"
echo "OSC changes should succeed:"
- $LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 || return 7
- $LCTL conf_param lustre-OST0000.failover.node=$NID || return 8
+ $LCTL conf_param ${NEWNAME}-OST0000.osc.max_dirty_mb=15 || return 7
+ $LCTL conf_param ${NEWNAME}-OST0000.failover.node=$NID || return 8
echo "ok."
echo "MDC changes should succeed:"
- $LCTL conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
+ $LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
echo "ok."
# MDT and OST should have registered with new nids, so we should have
# a fully-functioning client
echo "Check client and old fs contents"
+ OLDFS=$FSNAME
+ FSNAME=$NEWNAME
mount_client $MOUNT
- set_and_check client "cat $LPROC/mdc/*/max_rpcs_in_flight" "${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight" || return 11
- [ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "2479747619 779" ] || return 12
+ FSNAME=$OLDFS
+ set_and_check client "lctl get_param -n mdc.*.max_rpcs_in_flight" "${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight" || return 11
+ [ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "94306271 1478" ] || return 12
echo "ok."
cleanup
- [ -d $TMP/$tdir ] && rm -rf $TMP/$tdir
+ rm -rf $tmpdir || true # true is only for TMP on NFS
}
-run_test 32b "Upgrade from 1.4 with writeconf"
+run_test 32b "Upgrade from 1.8 with writeconf"
-test_33() { # bug 12333
- local FSNAME2=test1234
- local fs2mds_HOST=$mds_HOST
- local fs2ost_HOST=$ost_HOST
+test_33a() { # bug 12333, was test_33
+ local rc=0
+ local FSNAME2=test-123
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
- start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
+ start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
start fs2ost $fs2ostdev $OST_MOUNT_OPTS
+ do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" || rc=1
mkdir -p $MOUNT2
- mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || return 1
+ mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
echo "ok."
+ cp /etc/hosts $MOUNT2/ || rc=3
+ $LFS getstripe $MOUNT2/hosts
+
umount -d $MOUNT2
stop fs2ost -f
stop fs2mds -f
rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev
- cleanup_nocli || return 6
+ cleanup_nocli || rc=6
+ return $rc
}
-run_test 33 "Mount ost with a large index number"
+run_test 33a "Mount ost with a large index number"
-test_34() {
+test_33b() { # was test_34
setup
do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
# Drop lock cancelation reply during umount
#define OBD_FAIL_LDLM_CANCEL 0x304
- do_facet client sysctl -w lustre.fail_loc=0x80000304
- #sysctl -w lnet.debug=-1
+ do_facet client lctl set_param fail_loc=0x80000304
+ #lctl set_param debug=-1
umount_client $MOUNT
cleanup
}
-run_test 34 "Drop cancel during umount"
+run_test 33b "Drop cancel during umount"
test_34a() {
setup
- do_facet client multiop $DIR/file O_c &
- sleep 0.500s
+ do_facet client "sh runmultiop_bg_pause $DIR/file O_c"
manual_umount_client
rc=$?
do_facet client killall -USR1 multiop
fi
cleanup
- return 0
+ return 0
}
run_test 34b "force umount with failed mds should be normal"
fi
cleanup
- return 0
+ return 0
}
run_test 34c "force umount with failed ost should be normal"
test_35() { # bug 12459
setup
- DBG_SAVE="`sysctl -n lnet.debug`"
- sysctl -w lnet.debug="ha"
+ DBG_SAVE="`lctl get_param -n debug`"
+ lctl set_param debug="ha"
log "Set up a fake failnode for the MDS"
FAKENID="127.0.0.2"
- do_facet mds $LCTL conf_param ${FSNAME}-MDT0000.failover.node=$FAKENID || return 4
+ local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+ do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
log "Wait for RECONNECT_INTERVAL seconds (10s)"
sleep 10
log "Wait for df ($DFPID) ... "
wait $DFPID
log "done"
- sysctl -w lnet.debug="$DBG_SAVE"
+ lctl set_param debug="$DBG_SAVE"
# retrieve from the log the first server that the client tried to
# contact after the connection loss
$LCTL dk $TMP/lustre-log-$TESTNAME.log
NEXTCONN=`awk "/${MSG}/ {start = 1;}
- /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
+ /import_select_connection.$device-mdc.* using connection/ {
if (start) {
if (\\\$NF ~ /$FAKENID/)
print \\\$NF;
test_36() { # 12743
local rc
local FSNAME2=test1234
- local fs2mds_HOST=$mds_HOST
- local fs2ost_HOST=$ost_HOST
local fs3ost_HOST=$ost_HOST
[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
fi
[ $OSTCOUNT -lt 2 ] && skip "skipping test for single OST" && return
- [ $(grep -c obdfilter $LPROC/devices) -eq 0 ] &&
- skip "skipping test for remote OST" && return
+ [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
+ { skip "remote OST" && return 0; }
local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
local fs3ostdev=${fs3ost_DEV:-$(ostdevname 2)_2}
add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
- add fs2ost $OST_MKFS_OPTS --mkfsoptions='-b1024' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
+ # XXX after we support non 4K disk blocksize, change following --mkfsoptions with
+ # other argument
+ add fs2ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
add fs3ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs3ostdev || exit 10
start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
dd if=/dev/zero of=$MOUNT2/$tfile bs=1M count=7 || return 2
- BKTOTAL=`awk 'BEGIN{total=0}; {total+=$1}; END{print total}' \
- $LPROC/obdfilter/*/kbytestotal`
- BKFREE=`awk 'BEGIN{free=0}; {free+=$1}; END{print free}' \
- $LPROC/obdfilter/*/kbytesfree`
- BKAVAIL=`awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}' \
- $LPROC/obdfilter/*/kbytesavail`
+ BKTOTAL=`lctl get_param -n obdfilter.*.kbytestotal | awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
+ BKFREE=`lctl get_param -n obdfilter.*.kbytesfree | awk 'BEGIN{free=0}; {free+=$1}; END{print free}'`
+ BKAVAIL=`lctl get_param -n obdfilter.*.kbytesavail | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}'`
STRING=`df -P $MOUNT2 | tail -n 1 | awk '{print $2","$3","$4}'`
DFTOTAL=`echo $STRING | cut -d, -f1`
DFUSED=`echo $STRING | cut -d, -f2`
run_test 36 "df report consistency on OSTs with different block size"
test_37() {
+ [ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
LOCAL_MDSDEV="$TMP/mdt.img"
SYM_MDSDEV="$TMP/sym_mdt.img"
stop_mds
log "rename lov_objid file on MDS"
rm -f $TMP/lov_objid.orig
- do_facet mds "debugfs -w $MDSDEV" <<-EOF
- dump lov_objid $TMP/lov_objid.orig
- rm lov_objid
- EOF
- do_facet mds "od -Ax -td8 $TMP/lov_objid.orig"
+
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
+ do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
+
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.orig"
# check create in mds_lov_connect
start_mds
mount_client $MOUNT
for f in $FILES; do
[ $V ] && log "verifying $DIR/$tdir/$f"
- diff $f $DIR/$tdir/$f || ERROR=y
+ diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c $MDSDEV" <<-EOF
- dump lov_objid $TMP/lov_objid.new
- EOF
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new"
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new"
[ "$ERROR" = "y" ] && error "old and new files are different after connect" || true
-
-
+
# check it's updates in sync
umount_client $MOUNT
- stop_mds
- multiop $TMP/lov_objid.clear Ow4096c
- do_facet mds "debugfs -w $MDSDEV" <<-EOF
- write $TMP/lov_objid.clear lov_objid
- EOF
+ stop_mds
+
+ do_facet $SINGLEMDS dd if=/dev/zero of=$TMP/lov_objid.clear bs=4096 count=1
+ do_facet $SINGLEMDS "debugfs -w -R \\\"rm lov_objid\\\" $MDSDEV"
+ do_facet $SINGLEMDS "debugfs -w -R \\\"write $TMP/lov_objid.clear lov_objid\\\" $MDSDEV "
+
start_mds
mount_client $MOUNT
for f in $FILES; do
[ $V ] && log "verifying $DIR/$tdir/$f"
- diff $f $DIR/$tdir/$f || ERROR=y
+ diff -q $f $DIR/$tdir/$f || ERROR=y
done
- do_facet mds "debugfs -c $MDSDEV" <<-EOF
- dump lov_objid $TMP/lov_objid.new1
- EOF
- do_facet mds "od -Ax -td8 $TMP/lov_objid.new1"
+ do_facet $SINGLEMDS "debugfs -c -R \\\"dump lov_objid $TMP/lov_objid.new1\\\" $MDSDEV"
+ do_facet $SINGLEMDS "od -Ax -td8 $TMP/lov_objid.new1"
umount_client $MOUNT
stop_mds
[ "$ERROR" = "y" ] && error "old and new files are different after sync" || true
-
+
log "files compared the same"
- #cleanup
+ cleanup
}
run_test 38 "MDS recreates missing lov_objid file from OST data"
+test_39() {
+ PTLDEBUG=+malloc
+ setup
+ cleanup
+ perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
+ error "memory leak detected" || true
+}
+run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
+
+test_40() { # bug 15759
+ start_ost
+ #define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
+ do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
+ start_mds
+ cleanup
+}
+run_test 40 "race during service thread startup"
+
+test_41() { #bug 14134
+ local rc
+ local dev=${SINGLEMDS}_dev
+ local MDSDEV=${!dev}
+
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
+ start ost1 `ostdevname 1` $OST_MOUNT_OPTS
+ start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs
+ mkdir -p $MOUNT
+ mount_client $MOUNT || return 1
+ sleep 5
+
+ echo "blah blah" > $MOUNT/$tfile
+ cat $MOUNT/$tfile
+
+ umount_client $MOUNT
+ stop ost1 -f || return 201
+ stop_mds -f || return 202
+ stop_mds -f || return 203
+ unload_modules || return 204
+ return $rc
+}
+run_test 41 "mount mds with --nosvc and --nomgs"
+
+test_42() { #bug 14693
+ setup
+ check_mount || return 2
+ do_facet client lctl conf_param lustre.llite.some_wrong_param=10
+ umount_client $MOUNT
+ mount_client $MOUNT || return 1
+ cleanup
+ return 0
+}
+run_test 42 "invalid config param should not prevent client from mounting"
+
umount_client $MOUNT
cleanup_nocli
-cleanup_krb5_env
+cleanup_gss
+
+test_45() { #17310
+ setup
+ check_mount || return 2
+ stop_mds
+ df -h $MOUNT &
+ log "sleep 60 sec"
+ sleep 60
+#define OBD_FAIL_PTLRPC_LONG_UNLINK 0x50f
+ do_facet client "lctl set_param fail_loc=0x50f"
+ log "sleep 10 sec"
+ sleep 10
+ manual_umount_client --force || return 3
+ do_facet client "lctl set_param fail_loc=0x0"
+ start_mds
+ mount_client $MOUNT || return 4
+ cleanup
+ return 0
+}
+run_test 45 "long unlink handling in ptlrpcd"
+
equals_msg `basename $0`: test complete
[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true