eval mds${num}failover_HOST=\$\{mds${num}failover_HOST:-$mdsfailover_HOST\}
done
MDSDEVBASE=${MDSDEVBASE:-$TMP/${FSNAME}-mdt}
-MDSSIZE=${MDSSIZE:-100000}
-MDSOPT=${MDSOPT:-"--mountfsoptions=acl"}
+MDSSIZE=${MDSSIZE:-200000}
+#
+# Format options of facets can be specified with these variables:
+#
+# - <facet_type>OPT
+#
+# Arguments for "--mkfsoptions" shall be specified with these
+# variables:
+#
+# - <fstype>_MKFS_OPTS
+# - <facet_type>_FS_MKFS_OPTS
+#
+# A number of other options have their own specific variables. See
+# mkfs_opts().
+#
+MDSOPT=${MDSOPT:-}
+MDS_FS_MKFS_OPTS=${MDS_FS_MKFS_OPTS:-}
+MDS_MOUNT_OPTS=${MDS_MOUNT_OPTS:-}
+
+MGSDEV=${MGSDEV:-$MDSDEV1}
+MGSSIZE=${MGSSIZE:-$MDSSIZE}
+MGSOPT=${MGSOPT:-}
+MGS_FS_MKFS_OPTS=${MGS_FS_MKFS_OPTS:-}
+MGS_MOUNT_OPTS=${MGS_MOUNT_OPTS:-}
OSTCOUNT=${OSTCOUNT:-2}
OSTDEVBASE=${OSTDEVBASE:-$TMP/${FSNAME}-ost}
OSTSIZE=${OSTSIZE:-200000}
-OSTOPT=""
+OSTOPT=${OSTOPT:-}
+OST_FS_MKFS_OPTS=${OST_FS_MKFS_OPTS:-}
+OST_MOUNT_OPTS=${OST_MOUNT_OPTS:-}
# Can specify individual ost devs with
# OSTDEV1="/dev/sda"
# on specific hosts with
NETTYPE=${NETTYPE:-tcp}
MGSNID=${MGSNID:-`h2$NETTYPE $mgs_HOST`}
+
+#
+# Back end file system type(s) of facets can be specified with these
+# variables:
+#
+# 1. <facet>_FSTYPE
+# 2. <facet_type>FSTYPE
+# 3. FSTYPE
+#
+# More specific ones override more general ones. See facet_fstype().
+#
FSTYPE=${FSTYPE:-ldiskfs}
+
+LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS:-}
+ZFS_MKFS_OPTS=${ZFS_MKFS_OPTS:-}
+
+#
+# If any OST is "remote" and the non-default implementation (e.g.,
+# current OFD) is desired, then make sure that either a)
+# LOAD_MODULES_REMOTE is true or b) modprobe(8) is configured to
+# blacklist the undesired (and aliased the other, if necessary).
+#
+USE_OFD=${USE_OFD:-yes}
+LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-true}
+
STRIPE_BYTES=${STRIPE_BYTES:-1048576}
STRIPES_PER_OBJ=${STRIPES_PER_OBJ:-0}
SINGLEMDS=${SINGLEMDS:-"mds1"}
TIMEOUT=${TIMEOUT:-20}
-PTLDEBUG=${PTLDEBUG:-0x33f0404}
-DEBUG_SIZE=${DEBUG_SIZE:-10}
-SUBSYSTEM=${SUBSYSTEM:- 0xffb7e3ff}
+PTLDEBUG=${PTLDEBUG:-"vfstrace rpctrace dlmtrace neterror ha config ioctl super"}
+SUBSYSTEM=${SUBSYSTEM:-"all -lnet -lnd -pinger"}
+
+# promise 2MB for every cpu
+if [ -f /sys/devices/system/cpu/possible ]; then
+ _debug_mb=$((($(cut -d "-" -f 2 /sys/devices/system/cpu/possible)+1)*2))
+else
+ _debug_mb=$(($(getconf _NPROCESSORS_CONF)*2))
+fi
+
+DEBUG_SIZE=${DEBUG_SIZE:-$_debug_mb}
ENABLE_QUOTA=${ENABLE_QUOTA:-""}
QUOTA_TYPE="ug3"
QUOTA_USERS=${QUOTA_USERS:-"quota_usr quota_2usr sanityusr sanityusr1"}
-
-MKFSOPT=""
-[ "x$MDSJOURNALSIZE" != "x" ] &&
- MKFSOPT=$MKFSOPT" -J size=$MDSJOURNALSIZE"
-[ "x$MDSISIZE" != "x" ] &&
- MKFSOPT=$MKFSOPT" -i $MDSISIZE"
-[ "x$MKFSOPT" != "x" ] &&
- MKFSOPT="--mkfsoptions=\\\"$MKFSOPT\\\""
-[ "x$SECLEVEL" != "x" ] &&
- MKFSOPT=$MKFSOPT" --param mdt.sec_level=$SECLEVEL"
-[ "x$MDSCAPA" != "x" ] &&
- MKFSOPT=$MKFSOPT" --param mdt.capa=$MDSCAPA"
-[ "x$mdsfailover_HOST" != "x" ] &&
- MDSOPT=$MDSOPT" --failnode=`h2$NETTYPE $mdsfailover_HOST`"
-[ "x$STRIPE_BYTES" != "x" ] &&
- MDSOPT=$MDSOPT" --param lov.stripesize=$STRIPE_BYTES"
-[ "x$STRIPES_PER_OBJ" != "x" ] &&
- MDSOPT=$MDSOPT" --param lov.stripecount=$STRIPES_PER_OBJ"
-[ "x$L_GETIDENTITY" != "x" ] &&
- MDSOPT=$MDSOPT" --param mdt.identity_upcall=$L_GETIDENTITY"
-MDSn_MKFS_OPTS=$MDS_MKFS_OPTS
-MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$MDSSIZE --param sys.timeout=$TIMEOUT $MKFSOPT $MDSOPT $MDS_MKFS_OPTS"
-MDSn_MKFS_OPTS="--mgsnode=$MGSNID --mdt --fsname=$FSNAME --device-size=$MDSSIZE --param sys.timeout=$TIMEOUT $MKFSOPT $MDSOPT $MDSn_MKFS_OPTS"
-
-MKFSOPT=""
-[ "x$OSTJOURNALSIZE" != "x" ] &&
- MKFSOPT=$MKFSOPT" -J size=$OSTJOURNALSIZE"
-[ "x$MKFSOPT" != "x" ] &&
- MKFSOPT="--mkfsoptions=\\\"$MKFSOPT\\\""
-[ "x$SECLEVEL" != "x" ] &&
- MKFSOPT=$MKFSOPT" --param ost.sec_level=$SECLEVEL"
-[ "x$OSSCAPA" != "x" ] &&
- MKFSOPT=$MKFSOPT" --param ost.capa=$OSSCAPA"
-[ "x$ostfailover_HOST" != "x" ] &&
- OSTOPT=$OSTOPT" --failnode=`h2$NETTYPE $ostfailover_HOST`"
-OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$TIMEOUT $MKFSOPT $OSTOPT $OST_MKFS_OPTS"
-
-MDS_MOUNT_OPTS=${MDS_MOUNT_OPTS:-"-o loop,user_xattr,acl"}
-OST_MOUNT_OPTS=${OST_MOUNT_OPTS:-"-o loop"}
+LQUOTAOPTS=${LQUOTAOPTS:-"hash_lqs_cur_bits=3"}
#client
MOUNT=${MOUNT:-/mnt/${FSNAME}}
MOUNT1=${MOUNT1:-$MOUNT}
MOUNT2=${MOUNT2:-${MOUNT}2}
-MOUNTOPT=${MOUNTOPT:-"user_xattr,acl,flock"}
+MOUNTOPT=${MOUNTOPT:-"-o user_xattr,flock"}
DIR=${DIR:-$MOUNT}
DIR1=${DIR:-$MOUNT1}
DIR2=${DIR2:-$MOUNT2}
if [ $UID -ne 0 ]; then
log "running as non-root uid $UID"
RUNAS_ID="$UID"
+ RUNAS_GID=`id -g $USER`
RUNAS=""
else
RUNAS_ID=${RUNAS_ID:-500}
- RUNAS=${RUNAS:-"runas -u $RUNAS_ID"}
+ RUNAS_GID=${RUNAS_GID:-$RUNAS_ID}
+ RUNAS=${RUNAS:-"runas -u $RUNAS_ID -g $RUNAS_GID"}
fi
PDSH=${PDSH:-no_dsh}
POWER_UP=${POWER_UP:-"powerman --on"}
SLOW=${SLOW:-no}
FAIL_ON_ERROR=${FAIL_ON_ERROR:-true}
+
+MPIRUN=$(which mpirun 2>/dev/null) || true
+MPI_USER=${MPI_USER:-mpiuser}
+SHARED_DIR_LOGS=${SHARED_DIR_LOGS:-""}
+
+# This is used by a small number of tests to share state between the client
+# running the tests, or in some cases between the servers (e.g. lfsck.sh).
+# It needs to be a non-lustre filesystem that is available on all the nodes.
+SHARED_DIRECTORY=${SHARED_DIRECTORY:-""} # bug 17839 comment 65
git://git.whamcloud.com / fs / lustre-release.git / blobdiff