FSNAME=${FSNAME:-lustre}
# facet hosts
-mds_HOST=${mds_HOST:-`hostname`}
+mds_HOST=${mds_HOST:-$(hostname)}
mdsfailover_HOST=${mdsfailover_HOST}
-mds1_HOST=${mds1_HOST:-$mds_HOST}
-mds1failover_HOST=${mds1failover_HOST:-$mdsfailover_HOST}
-mgs_HOST=${mgs_HOST:-$mds1_HOST}
-ost_HOST=${ost_HOST:-`hostname`}
+mgs_HOST=${mgs_HOST:-$mds_HOST}
+ost_HOST=${ost_HOST:-$(hostname)}
ostfailover_HOST=${ostfailover_HOST}
CLIENTS=""
+# FILESET variable is used by sanity.sh to verify fileset
+# feature, tests should pass even under subdirectory namespace.
+FILESET=${FILESET:-""}
+[[ -z "$FILESET" ]] || [[ "${FILESET:0:1}" = "/" ]] || FILESET="/$FILESET"
TMP=${TMP:-/tmp}
DAEMONSIZE=${DAEMONSIZE:-500}
MDSCOUNT=${MDSCOUNT:-1}
-[ $MDSCOUNT -gt 4 ] && MDSCOUNT=4
-for num in $(seq $MDSCOUNT); do
- eval mds${num}_HOST=\$\{mds${num}_HOST:-$mds_HOST\}
- eval mds${num}failover_HOST=\$\{mds${num}failover_HOST:-$mdsfailover_HOST\}
-done
MDSDEVBASE=${MDSDEVBASE:-$TMP/${FSNAME}-mdt}
-MDSSIZE=${MDSSIZE:-200000}
+MDSSIZE=${MDSSIZE:-250000}
#
# Format options of facets can be specified with these variables:
#
MDSOPT=${MDSOPT:-}
MDS_FS_MKFS_OPTS=${MDS_FS_MKFS_OPTS:-}
MDS_MOUNT_OPTS=${MDS_MOUNT_OPTS:-}
+# <facet_type>_MOUNT_FS_OPTS is the mount options specified when formatting
+# the underlying device by argument "--mountfsoptions"
+MDS_MOUNT_FS_OPTS=${MDS_MOUNT_FS_OPTS:-}
-MGSDEV=${MGSDEV:-$MDSDEV1}
MGSSIZE=${MGSSIZE:-$MDSSIZE}
MGSOPT=${MGSOPT:-}
MGS_FS_MKFS_OPTS=${MGS_FS_MKFS_OPTS:-}
MGS_MOUNT_OPTS=${MGS_MOUNT_OPTS:-}
+MGS_MOUNT_FS_OPTS=${MGS_MOUNT_FS_OPTS:-}
OSTCOUNT=${OSTCOUNT:-2}
OSTDEVBASE=${OSTDEVBASE:-$TMP/${FSNAME}-ost}
-OSTSIZE=${OSTSIZE:-200000}
+OSTSIZE=${OSTSIZE:-400000}
OSTOPT=${OSTOPT:-}
OST_FS_MKFS_OPTS=${OST_FS_MKFS_OPTS:-}
OST_MOUNT_OPTS=${OST_MOUNT_OPTS:-}
+OST_MOUNT_FS_OPTS=${OST_MOUNT_FS_OPTS:-}
+OST_INDEX_LIST=${OST_INDEX_LIST:-}
# Can specify individual ost devs with
# OSTDEV1="/dev/sda"
# on specific hosts with
# ost1_HOST="uml2"
+# ost1_JRN="/dev/sdb1"
+#
+# For ZFS, ost devices can be specified via either or both of the following:
+# OSTZFSDEV1="${FSNAME}-ost1/ost1"
+# OSTDEV1="/dev/sdb1"
+#
+# OST indices can be specified as follows:
+# OSTINDEX1="1"
+# OSTINDEX2="2"
+# OSTINDEX3="4"
+# ......
+# or
+# OST_INDEX_LIST="[1,2,4-6,8]" # [n-m,l-k,...], where n < m and l < k, etc.
+#
+# The default index value of an individual OST is its facet number minus 1.
+# More specific ones override more general ones. See facet_index().
NETTYPE=${NETTYPE:-tcp}
-MGSNID=${MGSNID:-`h2$NETTYPE $mgs_HOST`}
+MGSNID=${MGSNID:-$(h2nettype $mgs_HOST)}
#
# Back end file system type(s) of facets can be specified with these
LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS:-}
ZFS_MKFS_OPTS=${ZFS_MKFS_OPTS:-}
-#
-# If any OST is "remote" and the non-default implementation (e.g.,
-# current OFD) is desired, then make sure that either a)
-# LOAD_MODULES_REMOTE is true or b) modprobe(8) is configured to
-# blacklist the undesired (and aliased the other, if necessary).
-#
-USE_OFD=${USE_OFD:-yes}
-LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-true}
+LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
-STRIPE_BYTES=${STRIPE_BYTES:-1048576}
-STRIPES_PER_OBJ=${STRIPES_PER_OBJ:-0}
+DEF_STRIPE_SIZE=${DEF_STRIPE_SIZE:-} # filesystem default stripe size in bytes
+DEF_STRIPE_COUNT=${DEF_STRIPE_COUNT:-} # filesystem default stripe count
SINGLEMDS=${SINGLEMDS:-"mds1"}
TIMEOUT=${TIMEOUT:-20}
-PTLDEBUG=${PTLDEBUG:-"vfstrace rpctrace dlmtrace neterror ha config ioctl super"}
-SUBSYSTEM=${SUBSYSTEM:-"all -lnet -lnd -pinger"}
+PTLDEBUG=${PTLDEBUG:-"vfstrace rpctrace dlmtrace neterror ha config \
+ ioctl super lfsck"}
+SUBSYSTEM=${SUBSYSTEM:-"all"}
# promise 2MB for every cpu
if [ -f /sys/devices/system/cpu/possible ]; then
ENABLE_QUOTA=${ENABLE_QUOTA:-""}
QUOTA_TYPE="ug3"
QUOTA_USERS=${QUOTA_USERS:-"quota_usr quota_2usr sanityusr sanityusr1"}
+# "error: conf_param: No such device" issue in every test suite logs
+# sanity-quota test_32 hash_lqs_cur_bits is not set properly
LQUOTAOPTS=${LQUOTAOPTS:-"hash_lqs_cur_bits=3"}
#client
MOUNT=${MOUNT:-/mnt/${FSNAME}}
MOUNT1=${MOUNT1:-$MOUNT}
MOUNT2=${MOUNT2:-${MOUNT}2}
-MOUNTOPT=${MOUNTOPT:-"-o user_xattr,flock"}
+MOUNT3=${MOUNT3:-${MOUNT}3}
+# Comma-separated option list used as "mount [...] -o $MOUNT_OPTS [...]"
+MOUNT_OPTS=${MOUNT_OPTS:-"user_xattr,flock"}
+# Mount flags (e.g. "-n") used as "mount [...] $MOUNT_FLAGS [...]"
+MOUNT_FLAGS=${MOUNT_FLAGS:-""}
DIR=${DIR:-$MOUNT}
DIR1=${DIR:-$MOUNT1}
DIR2=${DIR2:-$MOUNT2}
+DIR3=${DIR3:-$MOUNT3}
if [ $UID -ne 0 ]; then
log "running as non-root uid $UID"
SLOW=${SLOW:-no}
FAIL_ON_ERROR=${FAIL_ON_ERROR:-true}
-MPIRUN=$(which mpirun 2>/dev/null) || true
+MPIRUN=${MPIRUN:-$(which mpirun 2>/dev/null || true)}
MPI_USER=${MPI_USER:-mpiuser}
SHARED_DIR_LOGS=${SHARED_DIR_LOGS:-""}
+MACHINEFILE_OPTION=${MACHINEFILE_OPTION:-"-machinefile"}
# This is used by a small number of tests to share state between the client
# running the tests, or in some cases between the servers (e.g. lfsck.sh).
# It needs to be a non-lustre filesystem that is available on all the nodes.
-SHARED_DIRECTORY=${SHARED_DIRECTORY:-""} # bug 17839 comment 65
+SHARED_DIRECTORY=${SHARED_DIRECTORY:-$TMP} # bug 17839 comment 65
+
+#
+# In order to test multiple remote HSM agents, a new facet type named "AGT" and
+# the following associated variables are added:
+#
+# AGTCOUNT: number of agents
+# AGTDEV{N}: target HSM mount point (root path of the backend)
+# agt{N}_HOST: hostname of the agent agt{N}
+# SINGLEAGT: facet of the single agent
+#
+# Please refer to init_agt_vars() in sanity-hsm.sh for the default values of
+# these variables.
+#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff