--- /dev/null
+#!/bin/bash
+#
+#
+# auster - drive lustre tests
+# TODO
+# 1. --time-limt <seconds> add per test time limit, kill test if it runs to long
+# 2. Read list of tests to run from a file. same syntax as cli, but one test per line
+# 3. Run test on remote node
+# 4. Use long opts for auster options
+
+set -e
+
+export TF_FAIL=/tmp/tf.fail
+
+usage() {
+ cat <<EOF
+Usage ${0##*/} [options] suite [suite optoins] [suite [suite options]]
+Run Lustre regression tests suites.
+ -c CONFIG Test environment config file
+ -d LOGDIR Top level directory for logs
+ -f STR Config name (cfg/<name>.sh)
+ -i N Repeat tests N times (default 1). A new directory
+ will be created under LOGDIR for each iteration.
+ -k Don't stop when subtests fail
+ -R Remount lustre between tests
+ -r Reformat (during initial configuration if needed)
+ -s SLOW=yes
+ -v Verbose mode
+ -l No logger to Maloo database
+ -h This help.
+
+Suite options
+These are suite specific options that can be specified after each suite on
+the command line.
+ suite-name [options]
+ --only LIST Run only specific list of subtests
+ --except LIST Skip list of subtests
+ --start-at SUBTEST Start testing from subtest
+ --stop-at SUBTEST Stop testing at subtest
+ --time-limit LIMIT Don't allow this suite to run longer
+ than LIMT seconds. [UNIMPLEMENTED]
+
+Example usage:
+Run all of sanity and all of replay-single except for 70b with SLOW=y using
+the default "local" configuration.
+
+ auster -s sanity replay-single --except 70b
+
+Run test listed in batch-list 5 times using large config.
+
+ auster -f large -r 5 -b batch-list
+
+EOF
+ exit
+}
+
+dry_run=false
+do_reset=false
+verbose=false
+repeat_count=1
+logging=true
+reformat=false
+test_logs_dir=/tmp/test_logs
+export SLOW=no
+export ${NAME:=local}
+while getopts "c:d:nkf:i:rRslhv" opt
+do
+ case "$opt" in
+ c) CONFIG=$OPTARG;;
+ d) test_logs_dir=$OPTARG;;
+ k) export FAIL_ON_ERROR=false;;
+ n) dry_run=:;;
+ v) verbose=:;;
+ i) repeat_count=$OPTARG;;
+ f) NAME=$OPTARG;;
+ R) do_reset=:;;
+ r) reformat=:;;
+ s) SLOW=yes;;
+ l) logging=false;;
+ h|\?) usage;;
+ esac
+done
+shift $((OPTIND -1))
+
+if [ $logging = true ] ; then
+ if [ ! -r ~/.maloorc ] ; then
+ echo "A ~/.maloorc file is required in order to upload results."
+ echo " * Use -l to run without results upload (you can upload results later)"
+ echo " or "
+ echo " * Visit your maloo web interface to download your .maloorc file"
+ exit -1
+ fi
+fi
+
+#
+# Various paramters for the tests scripts
+#
+#: ${SIZE:=$((RAMKB * 2))}
+#: ${RSIZE:=512}
+#: ${UID:=1000}
+#: ${MOUNT=/mnt/lustre}
+#: ${MOUNT2:=${MOUNT}2}
+#: ${COUNT:=1000}
+#: ${TMP:=/tmp}
+
+reset_lustre() {
+ if $do_reset; then
+ stopall
+ setupall
+ fi
+}
+
+STARTTIME=`date +%s`
+
+: ${LUSTRE:=$(cd $(dirname $0)/..; echo $PWD)}
+. $LUSTRE/tests/test-framework.sh
+init_test_env
+
+print_summary () {
+ trap 0
+ local form="%-13s %-17s %s\n"
+ printf "$form" "status" "script" "skipped tests E(xcluded) S(low)"
+ echo "------------------------------------------------------------------------------------"
+ echo "Done!"
+}
+
+
+setup_if_needed() {
+ nfs_client_mode && return
+ auster_cleanup=false
+
+ local MOUNTED=$(mounted_lustre_filesystems)
+ if $(echo $MOUNTED | grep -w -q $MOUNT); then
+ check_config_clients $MOUNT
+ # init_facets_vars
+ # init_param_vars
+ return
+ fi
+
+ echo "Lustre is not mounted, trying to do setup ... "
+ $reformat && formatall
+ setupall
+
+ MOUNTED=$(mounted_lustre_filesystems)
+ if ! $(echo $MOUNTED | grep -w -q $MOUNT); then
+ echo "Lustre is not mounted after setup! "
+ exit 1
+ fi
+ auster_cleanup=true
+}
+
+cleanup_if_needed() {
+ if $auster_cleanup; then
+ cleanupall
+ fi
+}
+
+find_script_in_path() {
+ target=$1
+ path=$2
+ for dir in $(tr : " " <<< $path); do
+ if [ -e $dir/$target ]; then
+ echo $dir/$target
+ return 0
+ fi
+ if [ -e $dir/$target.sh ]; then
+ echo $dir/$target.sh
+ return 0
+ fi
+ done
+ return 1
+}
+
+title() {
+ log "-----============= acceptance-small: "$*" ============----- `date`"
+}
+
+doit() {
+ if $dry_run; then
+ printf "Would have run: %s\n" "$*"
+ return 0
+ fi
+ if $verbose; then
+ printf "Running: %s\n" "$*"
+ fi
+ "$@"
+}
+
+
+run_suite() {
+ suite_name=$1
+ suite_script=$2
+ only=$3
+ title $suite_name
+ log_test $suite_name
+
+ local start_ts=$(date +%s)
+ doit bash $suite_script $only
+ rc=$?
+ duration=$(($(date +%s) - $start_ts))
+ if [ -f $TF_FAIL -o $rc -ne 0 ]; then
+ status="FAIL"
+ else
+ status="PASS"
+ fi
+ log_test_status $duration $status
+
+ reset_lustre
+}
+
+run_suite_logged() {
+ local suite_name=${1%.sh}
+ local suite=$(echo ${suite_name} | tr "[:lower:]-" "[:upper:]_")
+ local suite_only=${suite}_ONLY
+
+ suite_script=$(find_script_in_path $suite_name $PATH:$LUSTRE/tests)
+
+ if [[ -z $suite_script ]]; then
+ echo "Can't find test script for $suite_name"
+ return 1
+ fi
+
+ echo "run_suite $suite_name $suite_script ${!suite_only}"
+ local log_name=${suite_name}.suite_log.$(hostname).log
+ run_suite $suite_name $suite_script "${!suite_only}" > $LOGDIR/$log_name 2>&1
+# run_suite $suite_name $suite_script "${!suite_only}" 2>&1 |tee $LOGDIR/$log_name
+
+}
+
+#
+# Add this to test-framework somewhere.
+reset_logging() {
+ export LOGDIR=${1:-/tmp/test_logs/$(date +%Y-%m-%d)/$(date +%H%M%S)}
+ unset YAML_LOG
+ init_logging
+}
+
+split_commas() {
+ echo "${*//,/ }"
+}
+
+run_suites() {
+ local n=0
+ local argv=("$@")
+ local basedir=${test_logs_dir}/$(date +%Y-%m-%d)/$(date +%H%M%S)
+ while ((n < repeat_count)); do
+ local RC=0
+ local logdir=$basedir
+ ((repeat_count > 1)) && logdir="$logdir/$n"
+ reset_logging $logdir
+ set -- "${argv[@]}"
+ while [[ -n $1 ]]; do
+ unset ONLY EXCEPT START_AT STOP_AT
+ local opts=""
+ local time_limit=""
+# echo "argv: $*"
+ suite=$1
+ shift;
+ while [[ -n $1 ]]; do
+ case "$1" in
+ --only)
+ shift;
+ export ONLY=$(split_commas $1)
+ opts+="ONLY=$ONLY ";;
+ --except)
+ shift;
+ export EXCEPT=$(split_commas $1)
+ opts+="EXCEPT=$EXCEPT ";;
+ --start-at)
+ shift;
+ export START_AT=$1
+ opts+="START_AT=$START_AT ";;
+ --stop-at)
+ shift;
+ export STOP_AT=$1
+ opts+="STOP_AT=$STOP_AT ";;
+ --time-limit)
+ shift;
+ time_limit=$1;;
+ *)
+ break;;
+ esac
+ shift
+ done
+ echo "running: $suite $opts"
+ run_suite_logged $suite || RC=$?
+ echo $suite returned $RC
+ done
+ if [ $logging = true ]; then
+ ./maloo_upload.sh $LOGDIR
+ fi
+ n=$((n + 1))
+ done
+}
+
+export NAME MOUNT START CLEAN
+. ${CONFIG:-$LUSTRE/tests/cfg/$NAME.sh}
+
+assert_env mds_HOST MDS_MKFS_OPTS
+assert_env ost_HOST OST_MKFS_OPTS OSTCOUNT
+assert_env FSNAME MOUNT MOUNT2
+
+setup_if_needed
+
+run_suites "$@"
+RC=$?
+
+if [[ $RC -eq 0 ]]; then
+ cleanup_if_needed
+fi
+
+echo "Finished at `date` in $((`date +%s` - $STARTTIME))s"
+echo "$0: completed with rc $RC" && exit $RC
git://git.whamcloud.com / fs / lustre-release.git / blobdiff