#include <lustre_ha.h>
#include <obd_class.h> /* for obd_zombie */
#include <obd_support.h> /* for OBD_FAIL_CHECK */
+#include <cl_object.h> /* cl_env_{get,put}() */
#include <lprocfs_status.h>
-static struct ptlrpcd_ctl ptlrpcd_pc;
-static struct ptlrpcd_ctl ptlrpcd_recovery_pc;
+enum pscope_thread {
+ PT_NORMAL,
+ PT_RECOVERY,
+ PT_NR
+};
+
+struct ptlrpcd_scope_ctl {
+ struct ptlrpcd_thread {
+ const char *pt_name;
+ struct ptlrpcd_ctl pt_ctl;
+ } pscope_thread[PT_NR];
+};
+
+static struct ptlrpcd_scope_ctl ptlrpcd_scopes[PSCOPE_NR] = {
+ [PSCOPE_BRW] = {
+ .pscope_thread = {
+ [PT_NORMAL] = {
+ .pt_name = "ptlrpcd-brw"
+ },
+ [PT_RECOVERY] = {
+ .pt_name = "ptlrpcd-brw-rcv"
+ }
+ }
+ },
+ [PSCOPE_OTHER] = {
+ .pscope_thread = {
+ [PT_NORMAL] = {
+ .pt_name = "ptlrpcd"
+ },
+ [PT_RECOVERY] = {
+ .pt_name = "ptlrpcd-rcv"
+ }
+ }
+ }
+};
struct semaphore ptlrpcd_sem;
static int ptlrpcd_users = 0;
cfs_waitq_signal(&rq_set->set_waitq);
}
-/*
+/*
* Requests that are added to the ptlrpcd queue are sent via
* ptlrpcd_check->ptlrpc_check_set().
*/
-void ptlrpcd_add_req(struct ptlrpc_request *req)
+void ptlrpcd_add_req(struct ptlrpc_request *req, enum ptlrpcd_scope scope)
{
struct ptlrpcd_ctl *pc;
+ enum pscope_thread pt;
int rc;
- if (req->rq_send_state == LUSTRE_IMP_FULL)
- pc = &ptlrpcd_pc;
- else
- pc = &ptlrpcd_recovery_pc;
-
+ LASSERT(scope < PSCOPE_NR);
+ pt = req->rq_send_state == LUSTRE_IMP_FULL ? PT_NORMAL : PT_RECOVERY;
+ pc = &ptlrpcd_scopes[scope].pscope_thread[pt].pt_ctl;
rc = ptlrpc_set_add_new_req(pc, req);
- if (rc) {
+ /*
+ * XXX disable this for CLIO: environment is needed for interpreter.
+ */
+ if (rc && 0) {
ptlrpc_interpterer_t interpreter;
-
+
interpreter = req->rq_interpret_reply;
/*
req = list_entry(pos, struct ptlrpc_request, rq_set_chain);
list_del_init(&req->rq_set_chain);
ptlrpc_set_add_req(pc->pc_set, req);
- /*
- * Need to calculate its timeout.
+ /*
+ * Need to calculate its timeout.
*/
rc = 1;
}
if (pc->pc_set->set_remaining) {
rc = rc | ptlrpc_check_set(env, pc->pc_set);
- /*
+ /*
* XXX: our set never completes, so we prune the completed
- * reqs after each iteration. boy could this be smarter.
+ * reqs after each iteration. boy could this be smarter.
*/
list_for_each_safe(pos, tmp, &pc->pc_set->set_requests) {
req = list_entry(pos, struct ptlrpc_request,
}
if (rc == 0) {
- /*
- * If new requests have been added, make sure to wake up.
+ /*
+ * If new requests have been added, make sure to wake up.
*/
spin_lock(&pc->pc_set->set_new_req_lock);
rc = !list_empty(&pc->pc_set->set_new_requests);
}
#ifdef __KERNEL__
-/*
+/*
* ptlrpc's code paths like to execute in process context, so we have this
* thread which spins on a set which contains the io rpcs. llite specifies
* ptlrpcd's set when it pushes pages down into the oscs.
static int ptlrpcd(void *arg)
{
struct ptlrpcd_ctl *pc = arg;
+ struct lu_env env = { .le_ses = NULL };
int rc;
ENTRY;
- if ((rc = cfs_daemonize_ctxt(pc->pc_name))) {
- complete(&pc->pc_starting);
- goto out;
+ rc = cfs_daemonize_ctxt(pc->pc_name);
+ if (rc == 0) {
+ /*
+ * XXX So far only "client" ptlrpcd uses an environment. In
+ * the future, ptlrpcd thread (or a thread-set) has to given
+ * an argument, describing its "scope".
+ */
+ rc = lu_context_init(&env.le_ctx,
+ LCT_CL_THREAD|LCT_REMEMBER|LCT_NOREF);
}
complete(&pc->pc_starting);
- /*
+ if (rc != 0)
+ RETURN(rc);
+ env.le_ctx.lc_cookie = 0x7;
+ /*
* This mainloop strongly resembles ptlrpc_set_wait() except that our
* set never completes. ptlrpcd_check() calls ptlrpc_check_set() when
- * there are requests in the set. New requests come in on the set's
- * new_req_list and ptlrpcd_check() moves them into the set.
+ * there are requests in the set. New requests come in on the set's
+ * new_req_list and ptlrpcd_check() moves them into the set.
*/
while (1) {
struct l_wait_info lwi;
int timeout;
+ rc = lu_env_refill(&env);
+ if (rc != 0) {
+ /*
+ * XXX This is very awkward situation, because
+ * execution can neither continue (request
+ * interpreters assume that env is set up), nor repeat
+ * the loop (as this potentially results in a tight
+ * loop of -ENOMEM's).
+ *
+ * Fortunately, refill only ever does something when
+ * new modules are loaded, i.e., early during boot up.
+ */
+ CERROR("Failure to refill session: %d\n", rc);
+ continue;
+ }
+
timeout = ptlrpc_set_next_timeout(pc->pc_set);
- lwi = LWI_TIMEOUT(cfs_time_seconds(timeout ? timeout : 1),
+ lwi = LWI_TIMEOUT(cfs_time_seconds(timeout ? timeout : 1),
ptlrpc_expired_set, pc->pc_set);
- lu_context_enter(&pc->pc_env.le_ctx);
+ lu_context_enter(&env.le_ctx);
l_wait_event(pc->pc_set->set_waitq,
- ptlrpcd_check(&pc->pc_env, pc), &lwi);
- lu_context_exit(&pc->pc_env.le_ctx);
+ ptlrpcd_check(&env, pc), &lwi);
+ lu_context_exit(&env.le_ctx);
/*
* Abort inflight rpcs for forced stop case.
break;
}
- /*
- * Wait for inflight requests to drain.
+ /*
+ * Wait for inflight requests to drain.
*/
if (!list_empty(&pc->pc_set->set_requests))
ptlrpc_set_wait(pc->pc_set);
-
+ lu_context_fini(&env.le_ctx);
complete(&pc->pc_finishing);
-out:
+
clear_bit(LIOD_START, &pc->pc_flags);
clear_bit(LIOD_STOP, &pc->pc_flags);
return 0;
int ptlrpcd_check_async_rpcs(void *arg)
{
struct ptlrpcd_ctl *pc = arg;
- int rc = 0;
+ int rc = 0;
- /*
- * Single threaded!!
+ /*
+ * Single threaded!!
*/
pc->pc_recurred++;
lu_context_exit(&pc->pc_env.le_ctx);
if (!rc)
ptlrpc_expired_set(pc->pc_set);
- /*
- * XXX: send replay requests.
+ /*
+ * XXX: send replay requests.
*/
- if (pc == &ptlrpcd_recovery_pc)
+ if (test_bit(LIOD_RECOVERY, &pc->pc_flags))
rc = ptlrpcd_check(&pc->pc_env, pc);
}
#endif
-int ptlrpcd_start(char *name, struct ptlrpcd_ctl *pc)
+int ptlrpcd_start(const char *name, struct ptlrpcd_ctl *pc)
{
int rc;
ENTRY;
-
- /*
- * Do not allow start second thread for one pc.
+
+ /*
+ * Do not allow start second thread for one pc.
*/
if (test_and_set_bit(LIOD_START, &pc->pc_flags)) {
CERROR("Starting second thread (%s) for same pc %p\n",
ptlrpc_set_destroy(pc->pc_set);
}
-int ptlrpcd_addref(void)
+void ptlrpcd_fini(void)
{
- int rc = 0;
+ int i;
+ int j;
+
ENTRY;
- mutex_down(&ptlrpcd_sem);
- if (++ptlrpcd_users != 1)
- GOTO(out, rc);
+ for (i = 0; i < PSCOPE_NR; ++i) {
+ for (j = 0; j < PT_NR; ++j) {
+ struct ptlrpcd_ctl *pc;
- rc = ptlrpcd_start("ptlrpcd", &ptlrpcd_pc);
- if (rc) {
- --ptlrpcd_users;
- GOTO(out, rc);
+ pc = &ptlrpcd_scopes[i].pscope_thread[j].pt_ctl;
+
+ if (test_bit(LIOD_START, &pc->pc_flags))
+ ptlrpcd_stop(pc, 0);
+ }
}
+ EXIT;
+}
- rc = ptlrpcd_start("ptlrpcd-recov", &ptlrpcd_recovery_pc);
- if (rc) {
- ptlrpcd_stop(&ptlrpcd_pc, 0);
- --ptlrpcd_users;
- GOTO(out, rc);
+int ptlrpcd_addref(void)
+{
+ int rc = 0;
+ int i;
+ int j;
+ ENTRY;
+
+ mutex_down(&ptlrpcd_sem);
+ if (++ptlrpcd_users == 1) {
+ for (i = 0; rc == 0 && i < PSCOPE_NR; ++i) {
+ for (j = 0; rc == 0 && j < PT_NR; ++j) {
+ struct ptlrpcd_thread *pt;
+ struct ptlrpcd_ctl *pc;
+
+ pt = &ptlrpcd_scopes[i].pscope_thread[j];
+ pc = &pt->pt_ctl;
+ if (j == PT_RECOVERY)
+ set_bit(LIOD_RECOVERY, &pc->pc_flags);
+ rc = ptlrpcd_start(pt->pt_name, pc);
+ }
+ }
+ if (rc != 0) {
+ --ptlrpcd_users;
+ ptlrpcd_fini();
+ }
}
-out:
mutex_up(&ptlrpcd_sem);
RETURN(rc);
}
void ptlrpcd_decref(void)
{
mutex_down(&ptlrpcd_sem);
- if (--ptlrpcd_users == 0) {
- ptlrpcd_stop(&ptlrpcd_pc, 0);
- ptlrpcd_stop(&ptlrpcd_recovery_pc, 0);
- }
+ if (--ptlrpcd_users == 0)
+ ptlrpcd_fini();
mutex_up(&ptlrpcd_sem);
}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff