# p2ph generated invalid macros for ioctl stuff, so I override some of it here
eval 'sub OBD_IOC_CREATE () { &_IOC(2, ord(\'f\'), 3, 4);}' unless
defined(&OBD_IOC_CREATE);
-eval 'sub OBD_IOC_SETUP_SUPER () { &_IOC(1, ord(\'f\'), 4, 4);}' unless
- defined(&OBD_IOC_SETUP_SUPER);
-eval 'sub OBD_IOC_CLEANUP_SUPER () { &_IOC(0, ord(\'f\'), 5, 0);}' unless
- defined(&OBD_IOC_CLEANUP_SUPER);
+eval 'sub OBD_IOC_SETUP_OBDDEV () { &_IOC(1, ord(\'f\'), 4, 4);}' unless
+ defined(&OBD_IOC_SETUP_OBDDEV);
+eval 'sub OBD_IOC_CLEANUP () { &_IOC(0, ord(\'f\'), 5, 0);}' unless
+ defined(&OBD_IOC_CLEANUP);
eval 'sub OBD_IOC_DESTROY () { &_IOC(1, ord(\'f\'), 6, 4);}' unless
defined(&OBD_IOC_DESTROY);
eval 'sub OBD_IOC_PREALLOCATE () { &_IOC(3, ord(\'f\'), 7, 4);}' unless
defined(&OBD_IOC_STATFS);
eval 'sub OBD_IOC_SYNC () { &_IOC(2, ord(\'f\'), 16, 4);}' unless
defined(&OBD_IOC_SYNC);
+eval 'sub OBD_IOC_READ2 () { &_IOC(3, ord(\'f\'), 17, 4);}' unless
+ defined(&OBD_IOC_READ2);
+eval 'sub OBD_IOC_FORMATOBD () { &_IOC(3, ord(\'f\'), 18, 4);}' unless
+ defined(&OBD_IOC_FORMATOBD);
+eval 'sub OBD_IOC_PARTITION () { &_IOC(3, ord(\'f\'), 19, 4);}' unless
+ defined(&OBD_IOC_PARTITION);
+eval 'sub OBD_IOC_ATTACH () { &_IOC(3, ord(\'f\'), 20, 4);}' unless
+ defined(&OBD_IOC_ATTACH);
eval 'sub ATTR_MODE () {1;}' unless defined(&ATTR_MODE);
eval 'sub ATTR_UID () {2;}' unless defined(&ATTR_UID);
use Term::ReadLine;
use IO::Handle;
-my ($device, $filesystem);
+
+my ($device, $filesystem, $file);
# startup options (I'll replace these when I have some to replace with)
-GetOptions("device=s" => \$device, "fs=s" => $filesystem) || die "Getoptions";
+GetOptions("f!" => \$file, "device=s" => \$device, "fs=s" => $filesystem) || die "Getoptions";
# genuine new simulated OBD device
-$device = "/dev/obd" unless $device;
+$device = "/dev/obd0" unless $device;
# object store in the ext2 formatted block device
$filesystem = "/dev/loop0" unless $filesystem;
-# get a console for the app
-my $term = new Term::ReadLine 'obdcontrol ';
-my $attribs = $term->Attribs;
-$term->ornaments('md,me,,'); # bold face prompt
-# make sure stdout is not buffered
-STDOUT->autoflush(1);
+
+# get a console for the app
my $line;
my $command;
my %commands =
('create' => {func => "Create", doc => "create: creates a new inode"},
+ 'attach' => {func => "Attach", doc => "format type [adapter bus tid lun]"},
+ 'format' => {func => "Format", doc => "format type adapter bus tid lun size"},
+ 'partition' => {func => "Partition", doc => "partition type adapter bus tid lun partition size"},
'setup' => {func => "Setup", doc => "setup: link the ext2 partition (default /dev/loop0) to this obddev"},
'connect' => {func => "Connect", doc => "connect: allocates client ID for this session"},
'disconnect' => {func => "Disconnect", doc => "disconnect [id]: frees client resources"},
'sync' => {func => "Sync", doc => "sync: flushes buffers to disk"},
'destroy' => {func => "Destroy", doc => "setup: destroys an inode"},
- 'cleanup' => {func => "Cleanup", doc => "detach the superblock from this minor obd dev"},
+ 'cleanup' => {func => "Cleanup", doc => "cleanup the minor obd device"},
'dec_use_count' => {func => "Decusecount", doc => "decreases the module use count so that the module can be removed following an oops"},
'read' => {func => "Read", doc => "read <inode> <count> [offset]"},
+ 'fsread' => {func => "Read2", doc => "read <inode> <count> [offset]"},
'write' => {func => "Write", doc => "write <inode> <offset> <text>"},
'setattr' => {func => "Setattr", doc => "setattr <inode> [mode [uid [gid [size [atime [mtime [ctime]]]]]]]"},
'getattr' => {func => "Getattr", doc => "getattr <inode>: displays inode object attributes"},
#
my @jcm_cmd_list = keys %commands;
-$attribs->{attempted_completion_function} = \&completeme;
#------------------------------------------------------------------------------
# Open the device, as we need an FD for the ioctl
sysopen(DEV_OBD, $device, 0) || die "Cannot open $device";
die "Unable to stat $filesystem.\n";
}
-# Get on with the show
-process_line();
+my $term, $attribs;
+
+if ( $file ) {
+ while ( <STDIN> ) {
+ print $_;
+ execute_line($_);
+ }
+ exit 0;
+} else {
+ $term = new Term::ReadLine 'obdcontrol ';
+ $attribs = $term->Attribs;
+ $attribs->{attempted_completion_function} = \&completeme;
+ $term->ornaments('md,me,,'); # bold face prompt
+
+ # make sure stdout is not buffered
+ STDOUT->autoflush(1);
+
+ # Get on with the show
+ process_line();
+}
#------------------------------------------------------------------------------
sub completeme {
my @arg = split(' ', $line);
my $word = shift @arg;
- my $cmd = find_command($word);
+ my $cmd;
+ if ( $file ) {
+ $cmd = $word;
+ } else {
+ $cmd = find_command($word);
+ }
unless ($cmd) {
printf STDERR "$word: No such command, or not unique.\n";
return (-1);
return (&{$commands{$cmd}->{func}}(@arg));
}
+
+sub Attach {
+ my $err = 0;
+ my $type = shift;
+ my $data;
+ my $datalen = 0;
+
+ if ($type eq "obdscsi" ) {
+ my $adapter = shift;
+ my $bus = shift;
+ my $tid = shift;
+ my $lun = shift;
+ $data = pack("iiiii", $adapter, $bus, $tid, $lun, $size);
+ $datalen = 4 * 4;
+ }
+
+ my $packed = pack("ipip", length($type), $type, $datalen, $data);
+
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_ATTACH, $packed);
+
+ if (!defined $rc) {
+ print STDERR "ioctl failed: $!\n";
+ } elsif ($rc eq "0 but true") {
+ print "Finished (success)\n";
+ } else {
+ print "ioctl returned error code $rc.\n";
+ }
+}
+
+sub Format {
+ my $err = 0;
+ my $size = shift;
+ my $data = pack("i", $size);
+ my $datalen = 4;
+
+ my $packed = pack("ip", $datalen, $data);
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_FORMATOBD, $packed);
+
+ if (!defined $rc) {
+ print STDERR "ioctl failed: $!\n";
+ } elsif ($rc eq "0 but true") {
+ print "Finished (success)\n";
+ } else {
+ print "ioctl returned error code $rc.\n";
+ }
+}
+
+sub Partition {
+ my $err = 0;
+ my $partno = shift;
+ my $size = shift;
+ my $data = pack("ii", $partno, $size);
+ my $datalen = 2 * 4;
+
+ my $packed = pack("ip", $datalen, $data);
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_PARTITION, $packed);
+
+ if (!defined $rc) {
+ print STDERR "ioctl failed: $!\n";
+ } elsif ($rc eq "0 but true") {
+ print "Finished (success)\n";
+ } else {
+ print "ioctl returned error code $rc.\n";
+ }
+}
+
sub Setup {
my $err = 0;
+ my $type = shift;
+ my $data;
+ my $datalen = 0;
- my $packed = pack("La24", $::st->rdev(), "sim_obd");
- my $rc = ioctl(DEV_OBD, &OBD_IOC_SETUP_SUPER, $packed);
+ $type = "sim_obd" unless $type;
+
+ if ( $type eq "sim_obd" ) {
+ my $dev = shift;
+ $dev = $::st->rdev() unless $dev;
+ $data = pack("i", $dev);
+ $datalen = 4;
+ }
+
+ my $packed = pack("ip", $datalen, $data);
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_SETUP_OBDDEV, $packed);
if (!defined $rc) {
print STDERR "ioctl failed: $!\n";
sub Cleanup {
my $err = "0";
- my $rc = ioctl(DEV_OBD, &OBD_IOC_CLEANUP_SUPER, $err);
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_CLEANUP, $err);
if (!defined $rc) {
print STDERR "ioctl failed: $!\n";
} elsif ($rc eq "0 but true") {
print "Finished (success)\n";
+ $::client_id = 0;
} else {
print "ioctl returned error code $rc.\n";
}
sub Connect {
- my $id = 0;
- my $ino = 0;
- my $bs = 0;
- my $bs_b = 0;
my $rc;
- # unsigned int conn_id;
- # unsigned long conn_ino;
- # unsigned long conn_blocksize;
- # unsigned char conn_blocksize_bits;
-
- my $packed = pack("ILLC", $id, $ino, $bs, $bs_b);
+ my $packed = "";
$rc = ioctl(DEV_OBD, &OBD_IOC_CONNECT, $packed);
- ($id, $ino, $bs, $bs_b) = unpack("ILLC", $packed);
+ $id = unpack("I", $packed);
if (!defined $rc) {
print STDERR "ioctl failed: $!\n";
} elsif ($rc eq "0 but true") {
$::client_id = $id;
print "Client ID : $id\n";
- print "Root inode : $ino\n";
- print "Blocksize : $bs\n";
- print "Blocksize bits: $bs_b\n";
print "Finished (success)\n";
} else {
print "ioctl returned error code $rc.\n";
my $arg = shift;
my $quiet = shift;
my $rc;
+ my $prealloc = 0;
if (defined($quiet) && !($quiet eq "quiet")) {
print "syntax: create [number of objects [quiet]]\n";
return;
}
- my $packed = pack("I", $::client_id);
+ my $packed = pack("IL", $::client_id, $prealloc);
if (!defined($arg) || scalar($arg) < 2) {
print "Creating 1 object...\n";
- my $packed = pack("I", 0);
$rc = ioctl(DEV_OBD, &OBD_IOC_CREATE, $packed);
if (!defined($quiet)) {
my $ino = unpack("L", $packed);
for ($i = 0; $i < scalar($arg); $i++) {
$rc = ioctl(DEV_OBD, &OBD_IOC_CREATE, $packed);
my $ino = unpack("L", $packed);
- if (!($rc eq "0 but true") || $packed == 0) {
+ if (!($rc eq "0 but true")) {
last;
+ $packed = pack("IL", $::client_id, $prealloc);
} elsif (!defined($quiet)) {
+ $packed = pack("IL", $::client_id, $prealloc);
print "Created object #$ino.\n";
}
}
}
}
+sub Read2 {
+ if (!defined($::client_id)) {
+ print "You must first ``connect''.\n";
+ return;
+ }
+
+ my $inode = shift;
+ my $count = shift;
+ my $offset = shift;
+
+ if (!defined($inode) || scalar($inode) < 1 || !defined($count) ||
+ $count < 1 || (defined($offset) && $offset < 0)) {
+ print "invalid arguments; type \"help read\" for a synopsis\n";
+ return;
+ }
+
+ if (!defined($offset)) {
+ $offset = 0;
+ }
+
+ print("Reading $count bytes starting at byte $offset from object " .
+ "$inode...\n");
+
+ # "allocate" a large enough buffer
+ my $buf = sprintf("%${count}s", " ");
+ die "suck" if (length($buf) != $count);
+
+ # the perl we're using doesn't support pack type Q, and offset is 64 bits
+ my $packed = pack("ILpLLL", $::client_id, $inode, $buf, $count, $offset, 0);
+
+ my $rc = ioctl(DEV_OBD, &OBD_IOC_READ2, $packed);
+
+ $retval = unpack("l", $packed);
+
+ if (!defined $rc) {
+ print STDERR "ioctl failed: $!\n";
+ } elsif ($rc eq "0 but true") {
+ if ($retval >= 0) {
+ print substr($buf, 0, $retval);
+ print "\nRead $retval of an attempted $count bytes.\n";
+ print "Finished (success)\n";
+ } else {
+ print "Finished (error $retval)\n";
+ }
+ } else {
+ print "ioctl returned error code $rc.\n";
+ }
+}
+
sub Write {
if (!defined($::client_id)) {
print "You must first ``connect''.\n";