-/* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
- * vim:expandtab:shiftwidth=8:tabstop=8:
- *
+/*
* GPL HEADER START
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
/*
* Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
* Use is subject to license terms.
- */
-/*
- * Copyright (c) 2011 Whamcloud, Inc.
+ *
+ * Copyright (c) 2011, 2012, Whamcloud, Inc.
*/
/*
* This file is part of Lustre, http://www.lustre.org/
cfs_mem_cache_t *ll_file_data_slab;
CFS_LIST_HEAD(ll_super_blocks);
-cfs_spinlock_t ll_sb_lock = CFS_SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(ll_sb_lock);
#ifndef MS_HAS_NEW_AOPS
extern struct address_space_operations ll_aops;
RETURN(NULL);
cfs_spin_lock_init(&sbi->ll_lock);
- cfs_init_mutex(&sbi->ll_lco.lco_lock);
+ cfs_mutex_init(&sbi->ll_lco.lco_lock);
cfs_spin_lock_init(&sbi->ll_pp_extent_lock);
cfs_spin_lock_init(&sbi->ll_process_lock);
sbi->ll_rw_stats_on = 0;
cfs_list_add_tail(&sbi->ll_list, &ll_super_blocks);
cfs_spin_unlock(&ll_sb_lock);
+ sbi->ll_flags |= LL_SBI_VERBOSE;
#ifdef ENABLE_CHECKSUM
sbi->ll_flags |= LL_SBI_CHECKSUM;
#endif
sbi->ll_sa_max = LL_SA_RPC_DEF;
cfs_atomic_set(&sbi->ll_sa_total, 0);
cfs_atomic_set(&sbi->ll_sa_wrong, 0);
+ cfs_atomic_set(&sbi->ll_agl_total, 0);
+ sbi->ll_flags |= LL_SBI_AGL_ENABLED;
RETURN(sbi);
}
OBD_CONNECT_CANCELSET | OBD_CONNECT_FID |
OBD_CONNECT_AT | OBD_CONNECT_LOV_V3 |
OBD_CONNECT_RMT_CLIENT | OBD_CONNECT_VBR |
- OBD_CONNECT_FULL20 | OBD_CONNECT_64BITHASH;
+ OBD_CONNECT_FULL20 | OBD_CONNECT_64BITHASH|
+ OBD_CONNECT_EINPROGRESS |
+ OBD_CONNECT_JOBSTATS;
if (sbi->ll_flags & LL_SBI_SOM_PREVIEW)
data->ocd_connect_flags |= OBD_CONNECT_SOM;
GOTO(out_md, err);
}
- err = obd_statfs(obd, osfs,
+ err = obd_statfs(NULL, sbi->ll_md_exp, osfs,
cfs_time_shift_64(-OBD_STATFS_CACHE_SECONDS), 0);
if (err)
GOTO(out_md_fid, err);
}
size = sizeof(*data);
- err = obd_get_info(sbi->ll_md_exp, sizeof(KEY_CONN_DATA),
+ err = obd_get_info(NULL, sbi->ll_md_exp, sizeof(KEY_CONN_DATA),
KEY_CONN_DATA, &size, data, NULL);
if (err) {
CERROR("Get connect data failed: %d \n", err);
sb->s_blocksize = osfs->os_bsize;
sb->s_blocksize_bits = log2(osfs->os_bsize);
sb->s_magic = LL_SUPER_MAGIC;
-
- /* for bug 11559. in $LINUX/fs/read_write.c, function do_sendfile():
- * retval = in_file->f_op->sendfile(...);
- * if (*ppos > max)
- * retval = -EOVERFLOW;
- *
- * it will check if *ppos is greater than max. However, max equals to
- * s_maxbytes, which is a negative integer in a x86_64 box since loff_t
- * has been defined as a signed long long integer in linux kernel. */
-#if BITS_PER_LONG == 64
- sb->s_maxbytes = PAGE_CACHE_MAXBYTES >> 1;
-#else
- sb->s_maxbytes = PAGE_CACHE_MAXBYTES;
-#endif
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
sbi->ll_namelen = osfs->os_namelen;
sbi->ll_max_rw_chunk = LL_DEFAULT_MAX_RW_CHUNK;
else
sbi->ll_md_brw_size = CFS_PAGE_SIZE;
+ if (data->ocd_connect_flags & OBD_CONNECT_LAYOUTLOCK) {
+ LCONSOLE_INFO("Layout lock feature supported.\n");
+ sbi->ll_flags |= LL_SBI_LAYOUT_LOCK;
+ }
+
obd = class_name2obd(dt);
if (!obd) {
CERROR("DT %s: not setup or attached\n", dt);
OBD_CONNECT_AT | OBD_CONNECT_RMT_CLIENT |
OBD_CONNECT_OSS_CAPA | OBD_CONNECT_VBR|
OBD_CONNECT_FULL20 | OBD_CONNECT_64BITHASH |
- OBD_CONNECT_MAXBYTES;
+ OBD_CONNECT_MAXBYTES |
+ OBD_CONNECT_EINPROGRESS |
+ OBD_CONNECT_JOBSTATS;
if (sbi->ll_flags & LL_SBI_SOM_PREVIEW)
data->ocd_connect_flags |= OBD_CONNECT_SOM;
* agreement on the supported algorithms at connect time */
data->ocd_connect_flags |= OBD_CONNECT_CKSUM;
- if (OBD_FAIL_CHECK(OBD_FAIL_OSC_CKSUM_ADLER_ONLY))
- data->ocd_cksum_types = OBD_CKSUM_ADLER;
- else
- data->ocd_cksum_types = cksum_types_supported();
+ if (OBD_FAIL_CHECK(OBD_FAIL_OSC_CKSUM_ADLER_ONLY))
+ data->ocd_cksum_types = OBD_CKSUM_ADLER;
+ else
+ data->ocd_cksum_types = cksum_types_supported_client();
}
#ifdef HAVE_LRU_RESIZE_SUPPORT
GOTO(out_dt, err);
}
- cfs_mutex_down(&sbi->ll_lco.lco_lock);
+ cfs_mutex_lock(&sbi->ll_lco.lco_lock);
sbi->ll_lco.lco_flags = data->ocd_connect_flags;
sbi->ll_lco.lco_md_exp = sbi->ll_md_exp;
sbi->ll_lco.lco_dt_exp = sbi->ll_dt_exp;
- cfs_mutex_up(&sbi->ll_lco.lco_lock);
+ cfs_mutex_unlock(&sbi->ll_lco.lco_lock);
fid_zero(&sbi->ll_root_fid);
err = md_getstatus(sbi->ll_md_exp, &sbi->ll_root_fid, &oc);
CDEBUG(D_SUPER, "rootfid "DFID"\n", PFID(&sbi->ll_root_fid));
sb->s_op = &lustre_super_operations;
-#if THREAD_SIZE >= 8192
+#if THREAD_SIZE >= 8192 /*b=17630*/ && !defined(HAVE_FSTYPE_MOUNT) /*LU-812*/
sb->s_export_op = &lustre_export_operations;
#endif
#endif
checksum = sbi->ll_flags & LL_SBI_CHECKSUM;
- err = obd_set_info_async(sbi->ll_dt_exp, sizeof(KEY_CHECKSUM),
+ err = obd_set_info_async(NULL, sbi->ll_dt_exp, sizeof(KEY_CHECKSUM),
KEY_CHECKSUM, sizeof(checksum), &checksum,
NULL);
cl_sb_init(sb);
sb->s_root = d_alloc_root(root);
- sb->s_root->d_op = &ll_d_root_ops;
+#ifdef HAVE_DCACHE_LOCK
+ sb->s_root->d_op = &ll_d_root_ops;
+#else
+ /* kernel >= 2.6.38 store dentry operations in sb->s_d_op. */
+ d_set_d_op(sb->s_root, &ll_d_root_ops);
+ sb->s_d_op = &ll_d_ops;
+#endif
sbi->ll_sdev_orig = sb->s_dev;
*lmmsize = obd_size_diskmd(sbi->ll_dt_exp, NULL);
size = sizeof(int);
- rc = obd_get_info(sbi->ll_md_exp, sizeof(KEY_MAX_EASIZE),
+ rc = obd_get_info(NULL, sbi->ll_md_exp, sizeof(KEY_MAX_EASIZE),
KEY_MAX_EASIZE, &size, lmmsize, NULL);
if (rc)
CERROR("Get max mdsize error rc %d \n", rc);
" flags=0x%x, fsdata=%p, %d subdirs\n", dentry,
dentry->d_name.len, dentry->d_name.name,
dentry->d_parent->d_name.len, dentry->d_parent->d_name.name,
- dentry->d_parent, dentry->d_inode, atomic_read(&dentry->d_count),
+ dentry->d_parent, dentry->d_inode, d_refcount(dentry),
dentry->d_flags, dentry->d_fsdata, subdirs);
if (dentry->d_inode != NULL)
ll_dump_inode(dentry->d_inode);
if (recur == 0)
return;
- list_for_each(tmp, &dentry->d_subdirs) {
- struct dentry *d = list_entry(tmp, struct dentry, d_child);
- lustre_dump_dentry(d, recur - 1);
- }
+ list_for_each(tmp, &dentry->d_subdirs) {
+ struct dentry *d = list_entry(tmp, struct dentry, d_u.d_child);
+ lustre_dump_dentry(d, recur - 1);
+ }
}
void client_common_put_super(struct super_block *sb)
*flags |= tmp;
goto next;
}
-
+ tmp = ll_set_opt("verbose", s1, LL_SBI_VERBOSE);
+ if (tmp) {
+ *flags |= tmp;
+ goto next;
+ }
+ tmp = ll_set_opt("noverbose", s1, LL_SBI_VERBOSE);
+ if (tmp) {
+ *flags &= ~tmp;
+ goto next;
+ }
LCONSOLE_ERROR_MSG(0x152, "Unknown option '%s', won't mount.\n",
s1);
RETURN(-EINVAL);
void ll_lli_init(struct ll_inode_info *lli)
{
lli->lli_inode_magic = LLI_INODE_MAGIC;
- cfs_sema_init(&lli->lli_size_sem, 1);
- cfs_sema_init(&lli->lli_write_sem, 1);
- cfs_init_rwsem(&lli->lli_trunc_sem);
lli->lli_flags = 0;
- lli->lli_maxbytes = PAGE_CACHE_MAXBYTES;
+ lli->lli_ioepoch = 0;
+ lli->lli_maxbytes = MAX_LFS_FILESIZE;
cfs_spin_lock_init(&lli->lli_lock);
+ lli->lli_posix_acl = NULL;
+ lli->lli_remote_perms = NULL;
+ cfs_mutex_init(&lli->lli_rmtperm_mutex);
+ /* Do not set lli_fid, it has been initialized already. */
+ fid_zero(&lli->lli_pfid);
CFS_INIT_LIST_HEAD(&lli->lli_close_list);
- lli->lli_inode_magic = LLI_INODE_MAGIC;
- cfs_sema_init(&lli->lli_och_sem, 1);
- lli->lli_mds_read_och = lli->lli_mds_write_och = NULL;
+ CFS_INIT_LIST_HEAD(&lli->lli_oss_capas);
+ cfs_atomic_set(&lli->lli_open_count, 0);
+ lli->lli_mds_capa = NULL;
+ lli->lli_rmtperm_time = 0;
+ lli->lli_pending_och = NULL;
+ lli->lli_mds_read_och = NULL;
+ lli->lli_mds_write_och = NULL;
lli->lli_mds_exec_och = NULL;
- lli->lli_open_fd_read_count = lli->lli_open_fd_write_count = 0;
+ lli->lli_open_fd_read_count = 0;
+ lli->lli_open_fd_write_count = 0;
lli->lli_open_fd_exec_count = 0;
- CFS_INIT_LIST_HEAD(&lli->lli_dead_list);
- lli->lli_remote_perms = NULL;
- lli->lli_rmtperm_utime = 0;
- cfs_sema_init(&lli->lli_rmtperm_sem, 1);
- CFS_INIT_LIST_HEAD(&lli->lli_oss_capas);
- cfs_spin_lock_init(&lli->lli_sa_lock);
+ cfs_mutex_init(&lli->lli_och_mutex);
+ cfs_spin_lock_init(&lli->lli_agl_lock);
+ lli->lli_has_smd = false;
lli->lli_clob = NULL;
- cfs_sema_init(&lli->lli_readdir_sem, 1);
- fid_zero(&lli->lli_pfid);
+
+ LASSERT(lli->lli_vfs_inode.i_mode != 0);
+ if (S_ISDIR(lli->lli_vfs_inode.i_mode)) {
+ cfs_mutex_init(&lli->lli_readdir_mutex);
+ lli->lli_opendir_key = NULL;
+ lli->lli_sai = NULL;
+ lli->lli_sa_pos = 0;
+ lli->lli_def_acl = NULL;
+ cfs_spin_lock_init(&lli->lli_sa_lock);
+ lli->lli_opendir_pid = 0;
+ } else {
+ cfs_sema_init(&lli->lli_size_sem, 1);
+ lli->lli_size_sem_owner = NULL;
+ lli->lli_symlink_name = NULL;
+ cfs_init_rwsem(&lli->lli_trunc_sem);
+ cfs_mutex_init(&lli->lli_write_mutex);
+ cfs_init_rwsem(&lli->lli_glimpse_sem);
+ lli->lli_glimpse_time = 0;
+ CFS_INIT_LIST_HEAD(&lli->lli_agl_list);
+ lli->lli_agl_index = 0;
+ lli->lli_async_rc = 0;
+ }
+ cfs_mutex_init(&lli->lli_layout_mutex);
}
static inline int ll_bdi_register(struct backing_dev_info *bdi)
#ifdef HAVE_BDI_REGISTER
static atomic_t ll_bdi_num = ATOMIC_INIT(0);
+#ifdef HAVE_BDI_NAME
bdi->name = "lustre";
+#endif
return bdi_register(bdi, NULL, "lustre-%d",
atomic_inc_return(&ll_bdi_num));
#else
OBD_FREE(dt, strlen(lprof->lp_dt) + instlen + 2);
if (err)
ll_put_super(sb);
- else
- LCONSOLE_WARN("Client %s has started\n", profilenm);
+ else if (sbi->ll_flags & LL_SBI_VERBOSE)
+ LCONSOLE_WARN("Mounted %s\n", profilenm);
OBD_FREE_PTR(cfg);
RETURN(err);
class_manual_cleanup(obd);
}
+ if (sbi->ll_flags & LL_SBI_VERBOSE)
+ LCONSOLE_WARN("Unmounted %s\n", profilenm ? profilenm : "");
+
if (profilenm)
class_del_profile(profilenm);
cl_env_cache_purge(~0);
- LCONSOLE_WARN("client %p umount complete\n", cfg.cfg_instance);
-
cfs_module_put(THIS_MODULE);
EXIT;
if (S_ISDIR(inode->i_mode)) {
/* these should have been cleared in ll_file_release */
- LASSERT(lli->lli_sai == NULL);
LASSERT(lli->lli_opendir_key == NULL);
+ LASSERT(lli->lli_sai == NULL);
LASSERT(lli->lli_opendir_pid == 0);
}
if (lli->lli_mds_read_och)
ll_md_real_close(inode, FMODE_READ);
- if (lli->lli_symlink_name) {
+ if (S_ISLNK(inode->i_mode) && lli->lli_symlink_name) {
OBD_FREE(lli->lli_symlink_name,
strlen(lli->lli_symlink_name) + 1);
lli->lli_symlink_name = NULL;
lli->lli_inode_magic = LLI_INODE_DEAD;
ll_clear_inode_capas(inode);
+ if (!S_ISDIR(inode->i_mode))
+ LASSERT(cfs_list_empty(&lli->lli_agl_list));
+
/*
* XXX This has to be done before lsm is freed below, because
* cl_object still uses inode lsm.
*/
cl_inode_fini(inode);
+ lli->lli_has_smd = false;
- if (lli->lli_smd) {
- obd_free_memmd(sbi->ll_dt_exp, &lli->lli_smd);
- lli->lli_smd = NULL;
- }
-
-
- EXIT;
+ EXIT;
}
-int ll_md_setattr(struct inode *inode, struct md_op_data *op_data,
+int ll_md_setattr(struct dentry *dentry, struct md_op_data *op_data,
struct md_open_data **mod)
{
struct lustre_md md;
+ struct inode *inode = dentry->d_inode;
struct ll_sb_info *sbi = ll_i2sbi(inode);
struct ptlrpc_request *request = NULL;
- int rc;
+ int rc, ia_valid;
ENTRY;
op_data = ll_prep_md_op_data(op_data, inode, NULL, NULL, 0, 0,
/* Unlinked special device node? Or just a race?
* Pretend we done everything. */
if (!S_ISREG(inode->i_mode) &&
- !S_ISDIR(inode->i_mode))
- rc = inode_setattr(inode, &op_data->op_attr);
+ !S_ISDIR(inode->i_mode)) {
+ ia_valid = op_data->op_attr.ia_valid;
+ op_data->op_attr.ia_valid &= ~TIMES_SET_FLAGS;
+ rc = simple_setattr(dentry, &op_data->op_attr);
+ op_data->op_attr.ia_valid = ia_valid;
+ }
} else if (rc != -EPERM && rc != -EACCES && rc != -ETXTBSY) {
CERROR("md_setattr fails: rc = %d\n", rc);
}
RETURN(rc);
}
- /* We call inode_setattr to adjust timestamps.
+ /* We want to adjust timestamps.
* If there is at least some data in file, we cleared ATTR_SIZE
- * above to avoid invoking vmtruncate, otherwise it is important
- * to call vmtruncate in inode_setattr to update inode->i_size
+ * to avoid update size, otherwise it is important to do.(SOM case)
* (bug 6196) */
- rc = inode_setattr(inode, &op_data->op_attr);
+ ia_valid = op_data->op_attr.ia_valid;
+ /* Since we set ATTR_*_SET flags above, and already done permission
+ * check, So don't let inode_change_ok() check it again. */
+ op_data->op_attr.ia_valid &= ~TIMES_SET_FLAGS;
+ rc = simple_setattr(dentry, &op_data->op_attr);
+ op_data->op_attr.ia_valid = ia_valid;
/* Extract epoch data if obtained. */
op_data->op_handle = md.body->handle;
return rc;
}
+#ifndef HAVE_VFS_INODE_NEWSIZE_OK
+/**
+ * inode_newsize_ok - may this inode be truncated to a given size
+ * @inode: the inode to be truncated
+ * @offset: the new size to assign to the inode
+ * @Returns: 0 on success, -ve errno on failure
+ *
+ * inode_newsize_ok will check filesystem limits and ulimits to check that the
+ * new inode size is within limits. inode_newsize_ok will also send SIGXFSZ
+ * when necessary. Caller must not proceed with inode size change if failure is
+ * returned. @inode must be a file (not directory), with appropriate
+ * permissions to allow truncate (inode_newsize_ok does NOT check these
+ * conditions).
+ *
+ * inode_newsize_ok must be called with i_mutex held.
+ */
+int inode_newsize_ok(const struct inode *inode, loff_t offset)
+{
+ if (inode->i_size < offset) {
+ unsigned long limit;
+
+ limit = rlimit(RLIMIT_FSIZE);
+ if (limit != RLIM_INFINITY && offset > limit)
+ goto out_sig;
+ if (offset > inode->i_sb->s_maxbytes)
+ goto out_big;
+ } else {
+ /*
+ * truncation of in-use swapfiles is disallowed - it would
+ * cause subsequent swapout to scribble on the now-freed
+ * blocks.
+ */
+ if (IS_SWAPFILE(inode))
+ return -ETXTBSY;
+ }
+
+ return 0;
+out_sig:
+ send_sig(SIGXFSZ, current, 0);
+out_big:
+ return -EFBIG;
+}
+#endif
+
/* If this inode has objects allocated to it (lsm != NULL), then the OST
* object(s) determine the file size and mtime. Otherwise, the MDS will
* keep these values until such a time that objects are allocated for it.
* I don't believe it is possible to get e.g. ATTR_MTIME_SET and ATTR_SIZE
* at the same time.
*/
-int ll_setattr_raw(struct inode *inode, struct iattr *attr)
+int ll_setattr_raw(struct dentry *dentry, struct iattr *attr)
{
+ struct lov_stripe_md *lsm;
+ struct inode *inode = dentry->d_inode;
struct ll_inode_info *lli = ll_i2info(inode);
- struct lov_stripe_md *lsm = lli->lli_smd;
struct md_op_data *op_data = NULL;
struct md_open_data *mod = NULL;
int ia_valid = attr->ia_valid;
CDEBUG(D_VFSTRACE, "VFS Op:inode=%lu valid %x\n", inode->i_ino,
attr->ia_valid);
- ll_stats_ops_tally(ll_i2sbi(inode), LPROC_LL_SETATTR, 1);
if (ia_valid & ATTR_SIZE) {
+ /* Check new size against VFS/VM file size limit and rlimit */
+ rc = inode_newsize_ok(inode, attr->ia_size);
+ if (rc)
+ RETURN(rc);
+
+ /* The maximum Lustre file size is variable, based on the
+ * OST maximum object size and number of stripes. This
+ * needs another check in addition to the VFS check above. */
if (attr->ia_size > ll_file_maxbytes(inode)) {
- CDEBUG(D_INODE, "file too large %llu > "LPU64"\n",
- attr->ia_size, ll_file_maxbytes(inode));
+ CDEBUG(D_INODE,"file "DFID" too large %llu > "LPU64"\n",
+ PFID(&lli->lli_fid), attr->ia_size,
+ ll_file_maxbytes(inode));
RETURN(-EFBIG);
}
}
/* POSIX: check before ATTR_*TIME_SET set (from inode_change_ok) */
- if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) {
+ if (ia_valid & TIMES_SET_FLAGS) {
if (cfs_curproc_fsuid() != inode->i_uid &&
!cfs_capable(CFS_CAP_FOWNER))
RETURN(-EPERM);
LTIME_S(attr->ia_mtime), LTIME_S(attr->ia_ctime),
cfs_time_current_sec());
- /* NB: ATTR_SIZE will only be set after this point if the size
- * resides on the MDS, ie, this file has no objects. */
- if (lsm)
- attr->ia_valid &= ~ATTR_SIZE;
-
/* We always do an MDS RPC, even if we're only changing the size;
* only the MDS knows whether truncate() should fail with -ETXTBUSY */
if (op_data == NULL)
RETURN(-ENOMEM);
- UNLOCK_INODE_MUTEX(inode);
- if (ia_valid & ATTR_SIZE)
- UP_WRITE_I_ALLOC_SEM(inode);
- cfs_down_write(&lli->lli_trunc_sem);
- LOCK_INODE_MUTEX(inode);
- if (ia_valid & ATTR_SIZE)
- DOWN_WRITE_I_ALLOC_SEM(inode);
+ if (!S_ISDIR(inode->i_mode)) {
+ if (ia_valid & ATTR_SIZE)
+ UP_WRITE_I_ALLOC_SEM(inode);
+ mutex_unlock(&inode->i_mutex);
+ cfs_down_write(&lli->lli_trunc_sem);
+ mutex_lock(&inode->i_mutex);
+ if (ia_valid & ATTR_SIZE)
+ DOWN_WRITE_I_ALLOC_SEM(inode);
+ }
+
+ /* We need a steady stripe configuration for setattr to avoid
+ * confusion. */
+ lsm = ccc_inode_lsm_get(inode);
+
+ /* NB: ATTR_SIZE will only be set after this point if the size
+ * resides on the MDS, ie, this file has no objects. */
+ if (lsm != NULL)
+ attr->ia_valid &= ~ATTR_SIZE;
memcpy(&op_data->op_attr, attr, sizeof(*attr));
(ia_valid & (ATTR_SIZE | ATTR_MTIME | ATTR_MTIME_SET)))
op_data->op_flags = MF_EPOCH_OPEN;
- rc = ll_md_setattr(inode, op_data, &mod);
+ rc = ll_md_setattr(dentry, op_data, &mod);
if (rc)
GOTO(out, rc);
ll_ioepoch_open(lli, op_data->op_ioepoch);
- if (!lsm || !S_ISREG(inode->i_mode)) {
+ if (lsm == NULL || !S_ISREG(inode->i_mode)) {
CDEBUG(D_INODE, "no lsm: not setting attrs on OST\n");
GOTO(out, rc = 0);
}
if (ia_valid & (ATTR_SIZE |
ATTR_ATIME | ATTR_ATIME_SET |
ATTR_MTIME | ATTR_MTIME_SET))
- /* on truncate and utimes send attributes to osts, setting
- * mtime/atime to past will be performed under PW 0:EOF extent
- * lock (new_size:EOF for truncate)
- * it may seem excessive to send mtime/atime updates to osts
- * when not setting times to past, but it is necessary due to
- * possible time de-synchronization */
+ /* For truncate and utimes sending attributes to OSTs, setting
+ * mtime/atime to the past will be performed under PW [0:EOF]
+ * extent lock (new_size:EOF for truncate). It may seem
+ * excessive to send mtime/atime updates to OSTs when not
+ * setting times to past, but it is necessary due to possible
+ * time de-synchronization between MDT inode and OST objects */
rc = ll_setattr_ost(inode, attr);
EXIT;
out:
+ ccc_inode_lsm_put(inode, lsm);
if (op_data) {
- if (op_data->op_ioepoch)
+ if (op_data->op_ioepoch) {
rc1 = ll_setattr_done_writing(inode, op_data, mod);
+ if (!rc)
+ rc = rc1;
+ }
ll_finish_md_op_data(op_data);
}
- cfs_up_write(&lli->lli_trunc_sem);
- return rc ? rc : rc1;
+ if (!S_ISDIR(inode->i_mode))
+ cfs_up_write(&lli->lli_trunc_sem);
+
+ ll_stats_ops_tally(ll_i2sbi(inode), (ia_valid & ATTR_SIZE) ?
+ LPROC_LL_TRUNC : LPROC_LL_SETATTR, 1);
+
+ return rc;
}
int ll_setattr(struct dentry *de, struct iattr *attr)
!(attr->ia_valid & ATTR_KILL_SGID))
attr->ia_valid |= ATTR_KILL_SGID;
- return ll_setattr_raw(de->d_inode, attr);
+ return ll_setattr_raw(de, attr);
}
int ll_statfs_internal(struct super_block *sb, struct obd_statfs *osfs,
int rc;
ENTRY;
- rc = obd_statfs(class_exp2obd(sbi->ll_md_exp), osfs, max_age, flags);
+ rc = obd_statfs(NULL, sbi->ll_md_exp, osfs, max_age, flags);
if (rc) {
CERROR("md_statfs fails: rc = %d\n", rc);
RETURN(rc);
if (sbi->ll_flags & LL_SBI_LAZYSTATFS)
flags |= OBD_STATFS_NODELAY;
- rc = obd_statfs_rqset(class_exp2obd(sbi->ll_dt_exp),
- &obd_osfs, max_age, flags);
+ rc = obd_statfs_rqset(sbi->ll_dt_exp, &obd_osfs, max_age, flags);
if (rc) {
CERROR("obd_statfs fails: rc = %d\n", rc);
RETURN(rc);
RETURN(rc);
}
-#ifndef HAVE_STATFS_DENTRY_PARAM
-int ll_statfs(struct super_block *sb, struct kstatfs *sfs)
-{
-#else
int ll_statfs(struct dentry *de, struct kstatfs *sfs)
{
- struct super_block *sb = de->d_sb;
-#endif
- struct obd_statfs osfs;
- int rc;
+ struct super_block *sb = de->d_sb;
+ struct obd_statfs osfs;
+ int rc;
CDEBUG(D_VFSTRACE, "VFS Op: at "LPU64" jiffies\n", get_jiffies_64());
ll_stats_ops_tally(ll_s2sbi(sb), LPROC_LL_STAFS, 1);
return 0;
}
-void ll_inode_size_lock(struct inode *inode, int lock_lsm)
+void ll_inode_size_lock(struct inode *inode)
{
struct ll_inode_info *lli;
- struct lov_stripe_md *lsm;
+
+ LASSERT(!S_ISDIR(inode->i_mode));
lli = ll_i2info(inode);
LASSERT(lli->lli_size_sem_owner != current);
cfs_down(&lli->lli_size_sem);
LASSERT(lli->lli_size_sem_owner == NULL);
lli->lli_size_sem_owner = current;
- lsm = lli->lli_smd;
- LASSERTF(lsm != NULL || lock_lsm == 0, "lsm %p, lock_lsm %d\n",
- lsm, lock_lsm);
- if (lock_lsm)
- lov_stripe_lock(lsm);
}
-void ll_inode_size_unlock(struct inode *inode, int unlock_lsm)
+void ll_inode_size_unlock(struct inode *inode)
{
struct ll_inode_info *lli;
- struct lov_stripe_md *lsm;
lli = ll_i2info(inode);
- lsm = lli->lli_smd;
- LASSERTF(lsm != NULL || unlock_lsm == 0, "lsm %p, lock_lsm %d\n",
- lsm, unlock_lsm);
- if (unlock_lsm)
- lov_stripe_unlock(lsm);
LASSERT(lli->lli_size_sem_owner == current);
lli->lli_size_sem_owner = NULL;
cfs_up(&lli->lli_size_sem);
void ll_update_inode(struct inode *inode, struct lustre_md *md)
{
- struct ll_inode_info *lli = ll_i2info(inode);
- struct mdt_body *body = md->body;
- struct lov_stripe_md *lsm = md->lsm;
- struct ll_sb_info *sbi = ll_i2sbi(inode);
-
- LASSERT ((lsm != NULL) == ((body->valid & OBD_MD_FLEASIZE) != 0));
- if (lsm != NULL) {
- cfs_down(&lli->lli_och_sem);
- if (lli->lli_smd == NULL) {
- if (lsm->lsm_magic != LOV_MAGIC_V1 &&
- lsm->lsm_magic != LOV_MAGIC_V3) {
- dump_lsm(D_ERROR, lsm);
- LBUG();
- }
- CDEBUG(D_INODE, "adding lsm %p to inode %lu/%u(%p)\n",
- lsm, inode->i_ino, inode->i_generation, inode);
- /* cl_inode_init must go before lli_smd or a race is
- * possible where client thinks the file has stripes,
- * but lov raid0 is not setup yet and parallel e.g.
- * glimpse would try to use uninitialized lov */
- cl_inode_init(inode, md);
- cfs_spin_lock(&lli->lli_lock);
- lli->lli_smd = lsm;
- cfs_spin_unlock(&lli->lli_lock);
- cfs_up(&lli->lli_och_sem);
- lli->lli_maxbytes = lsm->lsm_maxbytes;
- if (lli->lli_maxbytes > PAGE_CACHE_MAXBYTES)
- lli->lli_maxbytes = PAGE_CACHE_MAXBYTES;
- } else {
- cfs_up(&lli->lli_och_sem);
- LASSERT(lli->lli_smd->lsm_magic == lsm->lsm_magic &&
- lli->lli_smd->lsm_stripe_count ==
- lsm->lsm_stripe_count);
- if (lov_stripe_md_cmp(lli->lli_smd, lsm)) {
- CERROR("lsm mismatch for inode %ld\n",
- inode->i_ino);
- CERROR("lli_smd:\n");
- dump_lsm(D_ERROR, lli->lli_smd);
- CERROR("lsm:\n");
- dump_lsm(D_ERROR, lsm);
- LBUG();
- }
- }
- if (lli->lli_smd != lsm)
- obd_free_memmd(ll_i2dtexp(inode), &lsm);
- }
+ struct ll_inode_info *lli = ll_i2info(inode);
+ struct mdt_body *body = md->body;
+ struct lov_stripe_md *lsm = md->lsm;
+ struct ll_sb_info *sbi = ll_i2sbi(inode);
+
+ LASSERT ((lsm != NULL) == ((body->valid & OBD_MD_FLEASIZE) != 0));
+ if (lsm != NULL) {
+ LASSERT(S_ISREG(inode->i_mode));
+ cfs_mutex_lock(&lli->lli_och_mutex);
+ CDEBUG(D_INODE, "adding lsm %p to inode %lu/%u(%p)\n",
+ lsm, inode->i_ino, inode->i_generation, inode);
+ /* cl_file_inode_init must go before lli_has_smd or a race
+ * is possible where client thinks the file has stripes,
+ * but lov raid0 is not setup yet and parallel e.g.
+ * glimpse would try to use uninitialized lov */
+ if (cl_file_inode_init(inode, md) == 0)
+ lli->lli_has_smd = true;
+ cfs_mutex_unlock(&lli->lli_och_mutex);
+
+ lli->lli_maxbytes = lsm->lsm_maxbytes;
+ if (lli->lli_maxbytes > MAX_LFS_FILESIZE)
+ lli->lli_maxbytes = MAX_LFS_FILESIZE;
+ if (md->lsm != NULL)
+ obd_free_memmd(ll_i2dtexp(inode), &md->lsm);
+ }
if (sbi->ll_flags & LL_SBI_RMT_CLIENT) {
if (body->valid & OBD_MD_FLRMTPERM)
} else {
inode->i_blkbits = inode->i_sb->s_blocksize_bits;
}
-#ifdef HAVE_INODE_BLKSIZE
- inode->i_blksize = 1<<inode->i_blkbits;
-#endif
if (body->valid & OBD_MD_FLUID)
inode->i_uid = body->uid;
if (body->valid & OBD_MD_FLGID)
if (body->valid & OBD_MD_FLSIZE) {
if (exp_connect_som(ll_i2mdexp(inode)) &&
- S_ISREG(inode->i_mode) && lli->lli_smd) {
+ S_ISREG(inode->i_mode) && lli->lli_has_smd) {
struct lustre_handle lockh;
ldlm_mode_t mode;
if (lli->lli_flags & (LLIF_DONE_WRITING |
LLIF_EPOCH_PENDING |
LLIF_SOM_DIRTY)) {
- CERROR("ino %lu flags %lu still has "
+ CERROR("ino %lu flags %u still has "
"size authority! do not trust "
"the size got from MDS\n",
inode->i_ino, lli->lli_flags);
} else {
/* Use old size assignment to avoid
* deadlock bz14138 & bz14326 */
- inode->i_size = body->size;
+ i_size_write(inode, body->size);
lli->lli_flags |= LLIF_MDS_SIZE_LOCK;
}
ldlm_lock_decref(&lockh, mode);
} else {
/* Use old size assignment to avoid
* deadlock bz14138 & bz14326 */
- inode->i_size = body->size;
+ i_size_write(inode, body->size);
CDEBUG(D_VFSTRACE, "inode=%lu, updating i_size %llu\n",
inode->i_ino, (unsigned long long)body->size);
CDEBUG(D_VFSTRACE, "VFS Op:inode="DFID"(%p)\n",
PFID(&lli->lli_fid), inode);
- ll_lli_init(lli);
-
- LASSERT(!lli->lli_smd);
+ LASSERT(!lli->lli_has_smd);
/* Core attributes from the MDS first. This is a new inode, and
* the VFS doesn't zero times in the core inode so we have to do
void ll_delete_inode(struct inode *inode)
{
- struct ll_sb_info *sbi = ll_i2sbi(inode);
- int rc;
- ENTRY;
+ struct cl_inode_info *lli = cl_i2info(inode);
+ struct ll_sb_info *sbi = ll_i2sbi(inode);
+ int rc;
+ ENTRY;
- rc = obd_fid_delete(sbi->ll_md_exp, ll_inode2fid(inode));
- if (rc)
- CERROR("fid_delete() failed, rc %d\n", rc);
+ rc = obd_fid_delete(sbi->ll_md_exp, ll_inode2fid(inode));
+ if (rc)
+ CERROR("fid_delete() failed, rc %d\n", rc);
+
+ if (S_ISREG(inode->i_mode) && lli->lli_clob != NULL)
+ /* discard all dirty pages before truncating them, required by
+ * osc_extent implementation at LU-1030. */
+ cl_sync_file_range(inode, 0, OBD_OBJECT_EOF, CL_FSYNC_DISCARD);
truncate_inode_pages(&inode->i_data, 0);
}
/* Workaround end */
+#ifdef HAVE_SBOPS_EVICT_INODE
+ ll_clear_inode(inode);
+ end_writeback(inode);
+#else
clear_inode(inode);
+#endif
EXIT;
}
op_data = ll_prep_md_op_data(NULL, inode, NULL, NULL,
0, 0, LUSTRE_OPC_ANY,
NULL);
- if (op_data == NULL)
- RETURN(-ENOMEM);
+ if (IS_ERR(op_data))
+ RETURN(PTR_ERR(op_data));
op_data->op_valid = OBD_MD_FLFLAGS;
rc = md_getattr(sbi->ll_md_exp, op_data, &req);
RETURN(put_user(flags, (int *)arg));
}
case FSFILT_IOC_SETFLAGS: {
- struct lov_stripe_md *lsm = ll_i2info(inode)->lli_smd;
+ struct lov_stripe_md *lsm;
struct obd_info oinfo = { { { 0 } } };
struct md_op_data *op_data;
if (get_user(flags, (int *)arg))
RETURN(-EFAULT);
- oinfo.oi_md = lsm;
- OBDO_ALLOC(oinfo.oi_oa);
- if (!oinfo.oi_oa)
- RETURN(-ENOMEM);
-
op_data = ll_prep_md_op_data(NULL, inode, NULL, NULL, 0, 0,
LUSTRE_OPC_ANY, NULL);
if (IS_ERR(op_data))
NULL, 0, NULL, 0, &req, NULL);
ll_finish_md_op_data(op_data);
ptlrpc_req_finished(req);
- if (rc) {
- OBDO_FREE(oinfo.oi_oa);
- RETURN(rc);
- }
+ if (rc)
+ RETURN(rc);
- if (lsm == NULL) {
- OBDO_FREE(oinfo.oi_oa);
- GOTO(update_cache, rc);
- }
+ OBDO_ALLOC(oinfo.oi_oa);
+ if (!oinfo.oi_oa)
+ RETURN(-ENOMEM);
+
+ lsm = ccc_inode_lsm_get(inode);
+ if (lsm == NULL) {
+ inode->i_flags = ll_ext_to_inode_flags(flags);
+ OBDO_FREE(oinfo.oi_oa);
+ RETURN(0);
+ }
+ oinfo.oi_md = lsm;
oinfo.oi_oa->o_id = lsm->lsm_object_id;
oinfo.oi_oa->o_seq = lsm->lsm_object_seq;
oinfo.oi_oa->o_flags = flags;
oinfo.oi_oa->o_valid = OBD_MD_FLID | OBD_MD_FLFLAGS |
OBD_MD_FLGROUP;
oinfo.oi_capa = ll_mdscapa_get(inode);
- obdo_from_inode(oinfo.oi_oa, inode,
- &ll_i2info(inode)->lli_fid, 0);
+ obdo_set_parent_fid(oinfo.oi_oa, &ll_i2info(inode)->lli_fid);
rc = obd_setattr_rqset(sbi->ll_dt_exp, &oinfo, NULL);
capa_put(oinfo.oi_capa);
OBDO_FREE(oinfo.oi_oa);
- if (rc) {
- if (rc != -EPERM && rc != -EACCES)
- CERROR("osc_setattr_async fails: rc = %d\n",rc);
- RETURN(rc);
- }
+ ccc_inode_lsm_put(inode, lsm);
- EXIT;
-update_cache:
- inode->i_flags = ll_ext_to_inode_flags(flags);
- return 0;
+ if (rc && rc != -EPERM && rc != -EACCES)
+ CERROR("osc_setattr_async fails: rc = %d\n", rc);
+
+ RETURN(rc);
}
default:
RETURN(-ENOSYS);
CDEBUG(D_SEC, "flush context for user %d\n", cfs_curproc_uid());
- obd_set_info_async(sbi->ll_md_exp,
+ obd_set_info_async(NULL, sbi->ll_md_exp,
sizeof(KEY_FLUSH_CTX), KEY_FLUSH_CTX,
0, NULL, NULL);
- obd_set_info_async(sbi->ll_dt_exp,
+ obd_set_info_async(NULL, sbi->ll_dt_exp,
sizeof(KEY_FLUSH_CTX), KEY_FLUSH_CTX,
0, NULL, NULL);
return 0;
int ll_remount_fs(struct super_block *sb, int *flags, char *data)
{
struct ll_sb_info *sbi = ll_s2sbi(sb);
+ char *profilenm = get_profile_name(sb);
int err;
__u32 read_only;
if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY)) {
read_only = *flags & MS_RDONLY;
- err = obd_set_info_async(sbi->ll_md_exp,
+ err = obd_set_info_async(NULL, sbi->ll_md_exp,
sizeof(KEY_READ_ONLY),
KEY_READ_ONLY, sizeof(read_only),
&read_only, NULL);
if (err) {
- CERROR("Failed to change the read-only flag during "
- "remount: %d\n", err);
+ LCONSOLE_WARN("Failed to remount %s %s (%d)\n",
+ profilenm, read_only ?
+ "read-only" : "read-write", err);
return err;
}
sb->s_flags |= MS_RDONLY;
else
sb->s_flags &= ~MS_RDONLY;
+
+ if (sbi->ll_flags & LL_SBI_VERBOSE)
+ LCONSOLE_WARN("Remounted %s %s\n", profilenm,
+ read_only ? "read-only" : "read-write");
}
return 0;
}
struct ptlrpc_request *req,
struct super_block *sb)
{
- struct ll_sb_info *sbi = NULL;
- struct lustre_md md;
+ struct ll_sb_info *sbi = NULL;
+ struct lustre_md md;
+ __u64 ibits;
int rc;
ENTRY;
}
}
+ /* sanity check for LAYOUT lock. */
+ ibits = MDS_INODELOCK_LAYOUT;
+ if (S_ISREG(md.body->mode) && sbi->ll_flags & LL_SBI_LAYOUT_LOCK &&
+ md.lsm != NULL && !ll_have_md_lock(*inode, &ibits, LCK_MINMODE)) {
+ CERROR("%s: inode "DFID" (%p) layout lock not granted.\n",
+ ll_get_fsname(*inode), PFID(ll_inode2fid(*inode)),
+ *inode);
+ }
+
out:
- md_free_lustre_md(sbi->ll_md_exp, &md);
- RETURN(rc);
+ md_free_lustre_md(sbi->ll_md_exp, &md);
+ RETURN(rc);
}
int ll_obd_statfs(struct inode *inode, void *arg)
GOTO(out_statfs, rc = -EINVAL);
memcpy(&type, data->ioc_inlbuf1, sizeof(__u32));
- if (type == LL_STATFS_MDC)
+ if (type == LL_STATFS_LMV)
exp = sbi->ll_md_exp;
else if (type == LL_STATFS_LOV)
exp = sbi->ll_dt_exp;
* try to use the default stripe data from parent directory for
* allocating OST objects. Try to pass the parent FID to MDS. */
if (opc == LUSTRE_OPC_CREATE && i1 == i2 && S_ISREG(i2->i_mode) &&
- ll_i2info(i2)->lli_smd == NULL) {
- struct ll_inode_info *lli = ll_i2info(i2);
+ !ll_i2info(i2)->lli_has_smd) {
+ struct ll_inode_info *lli = ll_i2info(i2);
- cfs_spin_lock(&lli->lli_lock);
- if (likely(lli->lli_smd == NULL &&
- !fid_is_zero(&lli->lli_pfid)))
+ cfs_spin_lock(&lli->lli_lock);
+ if (likely(!lli->lli_has_smd && !fid_is_zero(&lli->lli_pfid)))
op_data->op_fid1 = lli->lli_pfid;
cfs_spin_unlock(&lli->lli_lock);
/** We ignore parent's capability temporary. */
RETURN(0);
}
+
+/**
+ * Get obd name by cmd, and copy out to user space
+ */
+int ll_get_obd_name(struct inode *inode, unsigned int cmd, unsigned long arg)
+{
+ struct ll_sb_info *sbi = ll_i2sbi(inode);
+ struct obd_device *obd;
+ ENTRY;
+
+ if (cmd == OBD_IOC_GETDTNAME)
+ obd = class_exp2obd(sbi->ll_dt_exp);
+ else if (cmd == OBD_IOC_GETMDNAME)
+ obd = class_exp2obd(sbi->ll_md_exp);
+ else
+ RETURN(-EINVAL);
+
+ if (!obd)
+ RETURN(-ENOENT);
+
+ if (cfs_copy_to_user((void *)arg, obd->obd_name,
+ strlen(obd->obd_name) + 1))
+ RETURN(-EFAULT);
+
+ RETURN(0);
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff