-/* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
- * vim:expandtab:shiftwidth=8:tabstop=8:
- *
+/*
* GPL HEADER START
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
* Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
* Use is subject to license terms.
*
- * Copyright (c) 2011, 2012, Whamcloud, Inc.
+ * Copyright (c) 2011, 2013, Intel Corporation.
*/
/*
* This file is part of Lustre, http://www.lustre.org/
* Author: Yury Umanets <umka@clusterfs.com>
*/
-#ifndef __LINUX_FID_H
-#define __LINUX_FID_H
+#ifndef __LUSTRE_FID_H
+#define __LUSTRE_FID_H
/** \defgroup fid fid
*
* @{
+ *
+ * http://wiki.lustre.org/index.php/Architecture_-_Interoperability_fids_zfs
+ * describes the FID namespace and interoperability requirements for FIDs.
+ * The important parts of that document are included here for reference.
+ *
+ * FID
+ * File IDentifier generated by client from range allocated by the SEQuence
+ * service and stored in struct lu_fid. The FID is composed of three parts:
+ * SEQuence, ObjectID, and VERsion. The SEQ component is a filesystem
+ * unique 64-bit integer, and only one client is ever assigned any SEQ value.
+ * The first 0x400 FID_SEQ_NORMAL [2^33, 2^33 + 0x400] values are reserved
+ * for system use. The OID component is a 32-bit value generated by the
+ * client on a per-SEQ basis to allow creating many unique FIDs without
+ * communication with the server. The VER component is a 32-bit value that
+ * distinguishes between different FID instantiations, such as snapshots or
+ * separate subtrees within the filesystem. FIDs with the same VER field
+ * are considered part of the same namespace.
+ *
+ * OLD filesystems are those upgraded from Lustre 1.x that predate FIDs, and
+ * MDTs use 32-bit ldiskfs internal inode/generation numbers (IGIFs), while
+ * OSTs use 64-bit Lustre object IDs and generation numbers.
+ *
+ * NEW filesystems are those formatted since the introduction of FIDs.
+ *
+ * IGIF
+ * Inode and Generation In FID, a surrogate FID used to globally identify
+ * an existing object on OLD formatted MDT file system. This would only be
+ * used on MDT0 in a DNE filesystem, because there cannot be more than one
+ * MDT in an OLD formatted filesystem. Belongs to sequence in [12, 2^32 - 1]
+ * range, where inode number is stored in SEQ, and inode generation is in OID.
+ * NOTE: This assumes no more than 2^32-1 inodes exist in the MDT filesystem,
+ * which is the maximum possible for an ldiskfs backend. It also assumes
+ * that the reserved ext3/ext4/ldiskfs inode numbers [0-11] are never visible
+ * to clients, which has always been true.
+ *
+ * IDIF
+ * object ID In FID, a surrogate FID used to globally identify an existing
+ * OST object on OLD formatted OST file system. Belongs to a sequence in
+ * [2^32, 2^33 - 1]. Sequence number is calculated as:
+ *
+ * 1 << 32 | (ost_index << 16) | ((objid >> 32) & 0xffff)
+ *
+ * that is, SEQ consists of 16-bit OST index, and higher 16 bits of object
+ * ID. The generation of unique SEQ values per OST allows the IDIF FIDs to
+ * be identified in the FLD correctly. The OID field is calculated as:
+ *
+ * objid & 0xffffffff
+ *
+ * that is, it consists of lower 32 bits of object ID. For objects within
+ * the IDIF range, object ID extraction will be:
+ *
+ * o_id = (fid->f_seq & 0x7fff) << 16 | fid->f_oid;
+ * o_seq = 0; // formerly group number
+ *
+ * NOTE: This assumes that no more than 2^48-1 objects have ever been created
+ * on any OST, and that no more than 65535 OSTs are in use. Both are very
+ * reasonable assumptions, i.e. an IDIF can uniquely map all objects assuming
+ * a maximum creation rate of 1M objects per second for a maximum of 9 years,
+ * or combinations thereof.
+ *
+ * OST_MDT0
+ * Surrogate FID used to identify an existing object on OLD formatted OST
+ * filesystem. Belongs to the reserved SEQuence 0, and is used prior to
+ * the introduction of FID-on-OST, at which point IDIF will be used to
+ * identify objects as residing on a specific OST.
+ *
+ * LLOG
+ * For Lustre Log objects the object sequence 1 is used. This is compatible
+ * with both OLD and NEW namespaces, as this SEQ number is in the
+ * ext3/ldiskfs reserved inode range and does not conflict with IGIF
+ * sequence numbers.
+ *
+ * ECHO
+ * For testing OST IO performance the object sequence 2 is used. This is
+ * compatible with both OLD and NEW namespaces, as this SEQ number is in
+ * the ext3/ldiskfs reserved inode range and does not conflict with IGIF
+ * sequence numbers.
+ *
+ * OST_MDT1 .. OST_MAX
+ * For testing with multiple MDTs the object sequence 3 through 9 is used,
+ * allowing direct mapping of MDTs 1 through 7 respectively, for a total
+ * of 8 MDTs including OST_MDT0. This matches the legacy CMD project "group"
+ * mappings. However, this SEQ range is only for testing prior to any
+ * production DNE release, as the objects in this range conflict across all
+ * OSTs, as the OST index is not part of the FID. For production DNE usage,
+ * OST objects created by MDT1+ will use FID_SEQ_NORMAL FIDs.
+ *
+ * DLM OST objid to IDIF mapping
+ * For compatibility with existing OLD OST network protocol structures, the
+ * FID must map onto the o_id and o_seq in a manner that ensures existing
+ * objects are identified consistently for IO, as well as onto the LDLM
+ * namespace to ensure IDIFs there is only a single resource name for any
+ * object in the DLM. The OLD OST object DLM resource mapping is:
+ *
+ * resource[] = {o_id, o_seq, 0, 0}; // o_seq == 0 for production releases
+ *
+ * The NEW OST object DLM resource mapping is the same for both MDT and OST:
+ *
+ * resource[] = {SEQ, OID, VER, HASH};
+ *
+ * NOTE: for mapping IDIF values to DLM resource names the o_id may be
+ * larger than the 2^33 reserved sequence numbers for IDIF, so it is possible
+ * for the o_id numbers to overlap FID SEQ numbers in the resource. However,
+ * in all production releases the OLD o_seq field is always zero, and all
+ * valid FID OID values are non-zero, so the lock resources will not collide.
+ * Even so, the MDT and OST resources are also in different LDLM namespaces.
*/
-/*
- * struct lu_fid
- */
#include <libcfs/libcfs.h>
#include <lustre/lustre_idl.h>
-#include <lustre_req_layout.h>
-#include <lustre_mdt.h>
-
+struct lu_env;
struct lu_site;
struct lu_context;
+struct obd_device;
+struct obd_export;
/* Whole sequences space range and zero range definitions */
extern const struct lu_seq_range LUSTRE_SEQ_SPACE_RANGE;
extern const struct lu_seq_range LUSTRE_SEQ_ZERO_RANGE;
extern const struct lu_fid LUSTRE_BFL_FID;
extern const struct lu_fid LU_OBF_FID;
+extern const struct lu_fid LU_LPF_FID;
extern const struct lu_fid LU_DOT_LUSTRE_FID;
enum {
- /*
- * This is how may FIDs may be allocated in one sequence(128k)
- */
- LUSTRE_SEQ_MAX_WIDTH = 0x0000000000020000ULL,
-
- /*
- * How many sequences to allocate to a client at once.
- */
- LUSTRE_SEQ_META_WIDTH = 0x0000000000000001ULL,
-
- /*
- * seq allocation pool size.
- */
- LUSTRE_SEQ_BATCH_WIDTH = LUSTRE_SEQ_META_WIDTH * 1000,
-
- /*
- * This is how many sequences may be in one super-sequence allocated to
- * MDTs.
- */
- LUSTRE_SEQ_SUPER_WIDTH = ((1ULL << 30ULL) * LUSTRE_SEQ_META_WIDTH)
+ /*
+ * This is how may metadata FIDs may be allocated in one sequence(128k)
+ */
+ LUSTRE_METADATA_SEQ_MAX_WIDTH = 0x0000000000020000ULL,
+
+ /*
+ * This is how many data FIDs could be allocated in one sequence(4B - 1)
+ */
+ LUSTRE_DATA_SEQ_MAX_WIDTH = 0x00000000FFFFFFFFULL,
+
+ /*
+ * How many sequences to allocate to a client at once.
+ */
+ LUSTRE_SEQ_META_WIDTH = 0x0000000000000001ULL,
+
+ /*
+ * seq allocation pool size.
+ */
+ LUSTRE_SEQ_BATCH_WIDTH = LUSTRE_SEQ_META_WIDTH * 1000,
+
+ /*
+ * This is how many sequences may be in one super-sequence allocated to
+ * MDTs.
+ */
+ LUSTRE_SEQ_SUPER_WIDTH = ((1ULL << 30ULL) * LUSTRE_SEQ_META_WIDTH)
};
enum {
/** special OID for local objects */
enum local_oid {
- /** \see fld_mod_init */
- FLD_INDEX_OID = 3UL,
- /** \see fid_mod_init */
- FID_SEQ_CTL_OID = 4UL,
- FID_SEQ_SRV_OID = 5UL,
- /** \see mdd_mod_init */
- MDD_ROOT_INDEX_OID = 6UL,
- MDD_ORPHAN_OID = 7UL,
- MDD_LOV_OBJ_OID = 8UL,
- MDD_CAPA_KEYS_OID = 9UL,
- /** \see mdt_mod_init */
- MDT_LAST_RECV_OID = 11UL,
- OSD_FS_ROOT_OID = 13UL,
- ACCT_USER_OID = 15UL,
- ACCT_GROUP_OID = 16UL,
- OFD_LAST_RECV_OID = 19UL,
- OFD_GROUP0_LAST_OID = 20UL,
- OFD_GROUP4K_LAST_OID = 20UL+4096,
- OFD_LAST_GROUP_OID = 4117UL,
- LLOG_CATALOGS_OID = 4118UL,
- MGS_CONFIGS_OID = 4119UL,
- OFD_HEALTH_CHECK_OID = 4120UL,
+ /** \see fld_mod_init */
+ FLD_INDEX_OID = 3UL,
+ /** \see fid_mod_init */
+ FID_SEQ_CTL_OID = 4UL,
+ FID_SEQ_SRV_OID = 5UL,
+ /** \see mdd_mod_init */
+ MDD_ROOT_INDEX_OID = 6UL, /* deprecated in 2.4 */
+ MDD_ORPHAN_OID = 7UL, /* deprecated in 2.4 */
+ MDD_LOV_OBJ_OID = 8UL,
+ MDD_CAPA_KEYS_OID = 9UL,
+ /** \see mdt_mod_init */
+ LAST_RECV_OID = 11UL,
+ OSD_FS_ROOT_OID = 13UL,
+ ACCT_USER_OID = 15UL,
+ ACCT_GROUP_OID = 16UL,
+ LFSCK_BOOKMARK_OID = 17UL,
+ OTABLE_IT_OID = 18UL,
+ /* These two definitions are obsolete
+ * OFD_GROUP0_LAST_OID = 20UL,
+ * OFD_GROUP4K_LAST_OID = 20UL+4096,
+ */
+ OFD_LAST_GROUP_OID = 4117UL,
+ LLOG_CATALOGS_OID = 4118UL,
+ MGS_CONFIGS_OID = 4119UL,
+ OFD_HEALTH_CHECK_OID = 4120UL,
+ MDD_LOV_OBJ_OSEQ = 4121UL,
+ LFSCK_NAMESPACE_OID = 4122UL,
+ REMOTE_PARENT_DIR_OID = 4123UL,
+ SLAVE_LLOG_CATALOGS_OID = 4124UL,
};
static inline void lu_local_obj_fid(struct lu_fid *fid, __u32 oid)
fid->f_ver = 0;
}
+static inline void lu_local_name_obj_fid(struct lu_fid *fid, __u32 oid)
+{
+ fid->f_seq = FID_SEQ_LOCAL_NAME;
+ fid->f_oid = oid;
+ fid->f_ver = 0;
+}
+
+/* For new FS (>= 2.4), the root FID will be changed to
+ * [FID_SEQ_ROOT:1:0], for existing FS, (upgraded to 2.4),
+ * the root FID will still be IGIF */
+static inline int fid_is_root(const struct lu_fid *fid)
+{
+ return unlikely((fid_seq(fid) == FID_SEQ_ROOT &&
+ fid_oid(fid) == 1));
+}
+
+static inline int fid_is_dot_lustre(const struct lu_fid *fid)
+{
+ return unlikely(fid_seq(fid) == FID_SEQ_DOT_LUSTRE &&
+ fid_oid(fid) == FID_OID_DOT_LUSTRE);
+}
+
+static inline int fid_is_obf(const struct lu_fid *fid)
+{
+ return unlikely(fid_seq(fid) == FID_SEQ_DOT_LUSTRE &&
+ fid_oid(fid) == FID_OID_DOT_LUSTRE_OBF);
+}
+
+static inline int fid_is_otable_it(const struct lu_fid *fid)
+{
+ return unlikely(fid_seq(fid) == FID_SEQ_LOCAL_FILE &&
+ fid_oid(fid) == OTABLE_IT_OID);
+}
+
+static inline int fid_is_acct(const struct lu_fid *fid)
+{
+ return fid_seq(fid) == FID_SEQ_LOCAL_FILE &&
+ (fid_oid(fid) == ACCT_USER_OID ||
+ fid_oid(fid) == ACCT_GROUP_OID);
+}
+
+static inline int fid_is_quota(const struct lu_fid *fid)
+{
+ return fid_seq(fid) == FID_SEQ_QUOTA ||
+ fid_seq(fid) == FID_SEQ_QUOTA_GLB;
+}
+
+static inline int fid_is_name_llog(const struct lu_fid *fid)
+{
+ return fid_seq(fid) == FID_SEQ_LLOG_NAME;
+}
+
+static inline int fid_is_namespace_visible(const struct lu_fid *fid)
+{
+ const __u64 seq = fid_seq(fid);
+
+ /* Here, we cannot distinguish whether the normal FID is for OST
+ * object or not. It is caller's duty to check more if needed. */
+ return (!fid_is_last_id(fid) &&
+ (fid_seq_is_norm(seq) || fid_seq_is_igif(seq))) ||
+ fid_is_root(fid) || fid_is_dot_lustre(fid);
+}
+
+static inline int fid_seq_in_fldb(__u64 seq)
+{
+ return fid_seq_is_igif(seq) || fid_seq_is_norm(seq) ||
+ fid_seq_is_root(seq) || fid_seq_is_dot(seq);
+}
+
+static inline void lu_last_id_fid(struct lu_fid *fid, __u64 seq, __u32 ost_idx)
+{
+ if (fid_seq_is_mdt0(seq)) {
+ fid->f_seq = fid_idif_seq(0, ost_idx);
+ } else {
+ LASSERTF(fid_seq_is_norm(seq) || fid_seq_is_echo(seq) ||
+ fid_seq_is_idif(seq), LPX64"\n", seq);
+ fid->f_seq = seq;
+ }
+ fid->f_oid = 0;
+ fid->f_ver = 0;
+}
+
+/* seq client type */
+enum lu_cli_type {
+ LUSTRE_SEQ_METADATA = 1,
+ LUSTRE_SEQ_DATA
+};
+
enum lu_mgr_type {
LUSTRE_SEQ_SERVER,
LUSTRE_SEQ_CONTROLLER
};
-enum lu_cli_type {
- LUSTRE_SEQ_METADATA,
- LUSTRE_SEQ_DATA
-};
-
struct lu_server_seq;
/* Client sequence manager interface. */
struct lu_client_seq {
/* Sequence-controller export. */
struct obd_export *lcs_exp;
- cfs_mutex_t lcs_mutex;
+ struct mutex lcs_mutex;
/*
* Range of allowed for allocation sequeces. When using lu_client_seq on
/* Seq-server for direct talking */
struct lu_server_seq *lcs_srv;
- /* wait queue for fid allocation and update indicator */
- cfs_waitq_t lcs_waitq;
- int lcs_update;
+ /* wait queue for fid allocation and update indicator */
+ wait_queue_head_t lcs_waitq;
+ int lcs_update;
};
/* server sequence manager interface */
struct lu_client_seq *lss_cli;
/* Mutex for protecting allocation */
- cfs_mutex_t lss_mutex;
+ struct mutex lss_mutex;
/*
* Service uuid, passed from MDT + seq name to form unique seq name to
/* sync is needed for update operation */
__u32 lss_need_sync;
- /**
- * Pointer to site object, required to access site fld.
- */
- struct md_site *lss_site;
-};
-int seq_query(struct com_thread_info *info);
+ /**
+ * Pointer to site object, required to access site fld.
+ */
+ struct seq_server_site *lss_site;
+};
/* Server methods */
-int seq_server_init(struct lu_server_seq *seq,
- struct dt_device *dev,
- const char *prefix,
- enum lu_mgr_type type,
- struct md_site *ls,
- const struct lu_env *env);
+
+int seq_server_init(const struct lu_env *env,
+ struct lu_server_seq *seq,
+ struct dt_device *dev,
+ const char *prefix,
+ enum lu_mgr_type type,
+ struct seq_server_site *ss);
void seq_server_fini(struct lu_server_seq *seq,
const struct lu_env *env);
struct lu_seq_range *out,
const struct lu_env *env);
-int seq_server_set_cli(struct lu_server_seq *seq,
- struct lu_client_seq *cli,
- const struct lu_env *env);
+int seq_server_set_cli(const struct lu_env *env,
+ struct lu_server_seq *seq,
+ struct lu_client_seq *cli);
/* Client methods */
int seq_client_init(struct lu_client_seq *seq,
struct lu_fid *fid);
int seq_client_get_seq(const struct lu_env *env, struct lu_client_seq *seq,
seqno_t *seqnr);
-
+int seq_site_fini(const struct lu_env *env, struct seq_server_site *ss);
/* Fids common stuff */
int fid_is_local(const struct lu_env *env,
struct lu_site *site, const struct lu_fid *fid);
+enum lu_cli_type;
+int client_fid_init(struct obd_device *obd, struct obd_export *exp,
+ enum lu_cli_type type);
+int client_fid_fini(struct obd_device *obd);
+
/* fid locking */
struct ldlm_namespace;
* renaming name[2,3] fields that need to be used for the quota identifier.
*/
static inline struct ldlm_res_id *
-fid_build_reg_res_name(const struct lu_fid *f,
- struct ldlm_res_id *name)
+fid_build_reg_res_name(const struct lu_fid *fid, struct ldlm_res_id *res)
{
- memset(name, 0, sizeof *name);
- name->name[LUSTRE_RES_ID_SEQ_OFF] = fid_seq(f);
- name->name[LUSTRE_RES_ID_VER_OID_OFF] = fid_ver_oid(f);
- return name;
+ memset(res, 0, sizeof(*res));
+ res->name[LUSTRE_RES_ID_SEQ_OFF] = fid_seq(fid);
+ res->name[LUSTRE_RES_ID_VER_OID_OFF] = fid_ver_oid(fid);
+
+ return res;
}
/*
- * Return true if resource is for object identified by fid.
+ * Return true if resource is for object identified by FID.
*/
-static inline int fid_res_name_eq(const struct lu_fid *f,
- const struct ldlm_res_id *name)
+static inline int fid_res_name_eq(const struct lu_fid *fid,
+ const struct ldlm_res_id *res)
{
- return name->name[LUSTRE_RES_ID_SEQ_OFF] == fid_seq(f) &&
- name->name[LUSTRE_RES_ID_VER_OID_OFF] == fid_ver_oid(f);
+ return res->name[LUSTRE_RES_ID_SEQ_OFF] == fid_seq(fid) &&
+ res->name[LUSTRE_RES_ID_VER_OID_OFF] == fid_ver_oid(fid);
}
+/*
+ * Extract FID from LDLM resource. Reverse of fid_build_reg_res_name().
+ */
+static inline struct lu_fid *
+fid_extract_from_res_name(struct lu_fid *fid, const struct ldlm_res_id *res)
+{
+ fid->f_seq = res->name[LUSTRE_RES_ID_SEQ_OFF];
+ fid->f_oid = (__u32)(res->name[LUSTRE_RES_ID_VER_OID_OFF]);
+ fid->f_ver = (__u32)(res->name[LUSTRE_RES_ID_VER_OID_OFF] >> 32);
+ LASSERT(fid_res_name_eq(fid, res));
+
+ return fid;
+}
+/*
+ * Build (DLM) resource identifier from global quota FID and quota ID.
+ */
static inline struct ldlm_res_id *
-fid_build_pdo_res_name(const struct lu_fid *f,
- unsigned int hash,
- struct ldlm_res_id *name)
+fid_build_quota_res_name(const struct lu_fid *glb_fid, union lquota_id *qid,
+ struct ldlm_res_id *res)
{
- fid_build_reg_res_name(f, name);
- name->name[LUSTRE_RES_ID_HSH_OFF] = hash;
- return name;
+ fid_build_reg_res_name(glb_fid, res);
+ res->name[LUSTRE_RES_ID_QUOTA_SEQ_OFF] = fid_seq(&qid->qid_fid);
+ res->name[LUSTRE_RES_ID_QUOTA_VER_OID_OFF] = fid_ver_oid(&qid->qid_fid);
+
+ return res;
}
+/*
+ * Extract global FID and quota ID from resource name
+ */
+static inline void fid_extract_from_quota_res(struct lu_fid *glb_fid,
+ union lquota_id *qid,
+ const struct ldlm_res_id *res)
+{
+ fid_extract_from_res_name(glb_fid, res);
+ qid->qid_fid.f_seq = res->name[LUSTRE_RES_ID_QUOTA_SEQ_OFF];
+ qid->qid_fid.f_oid = (__u32)res->name[LUSTRE_RES_ID_QUOTA_VER_OID_OFF];
+ qid->qid_fid.f_ver =
+ (__u32)(res->name[LUSTRE_RES_ID_QUOTA_VER_OID_OFF] >> 32);
+}
+
+static inline struct ldlm_res_id *
+fid_build_pdo_res_name(const struct lu_fid *fid, unsigned int hash,
+ struct ldlm_res_id *res)
+{
+ fid_build_reg_res_name(fid, res);
+ res->name[LUSTRE_RES_ID_HSH_OFF] = hash;
+
+ return res;
+}
+
+/**
+ * Build DLM resource name from object id & seq, which will be removed
+ * finally, when we replace ost_id with FID in data stack.
+ *
+ * Currently, resid from the old client, whose res[0] = object_id,
+ * res[1] = object_seq, is just oposite with Metatdata
+ * resid, where, res[0] = fid->f_seq, res[1] = fid->f_oid.
+ * To unifiy the resid identification, we will reverse the data
+ * resid to keep it same with Metadata resid, i.e.
+ *
+ * For resid from the old client,
+ * res[0] = objid, res[1] = 0, still keep the original order,
+ * for compatiblity.
+ *
+ * For new resid
+ * res will be built from normal FID directly, i.e. res[0] = f_seq,
+ * res[1] = f_oid + f_ver.
+ */
+static inline void ostid_build_res_name(struct ost_id *oi,
+ struct ldlm_res_id *name)
+{
+ memset(name, 0, sizeof *name);
+ if (fid_seq_is_mdt0(ostid_seq(oi))) {
+ name->name[LUSTRE_RES_ID_SEQ_OFF] = ostid_id(oi);
+ name->name[LUSTRE_RES_ID_VER_OID_OFF] = ostid_seq(oi);
+ } else {
+ fid_build_reg_res_name(&oi->oi_fid, name);
+ }
+}
+
+/**
+ * Return true if the resource is for the object identified by this id & group.
+ */
+static inline int ostid_res_name_eq(struct ost_id *oi,
+ struct ldlm_res_id *name)
+{
+ /* Note: it is just a trick here to save some effort, probably the
+ * correct way would be turn them into the FID and compare */
+ if (fid_seq_is_mdt0(ostid_seq(oi))) {
+ return name->name[LUSTRE_RES_ID_SEQ_OFF] == ostid_id(oi) &&
+ name->name[LUSTRE_RES_ID_VER_OID_OFF] == ostid_seq(oi);
+ } else {
+ return name->name[LUSTRE_RES_ID_SEQ_OFF] == ostid_seq(oi) &&
+ name->name[LUSTRE_RES_ID_VER_OID_OFF] == ostid_id(oi);
+ }
+}
+
+/* The same as osc_build_res_name() */
+static inline void ost_fid_build_resid(const struct lu_fid *fid,
+ struct ldlm_res_id *resname)
+{
+ if (fid_is_mdt0(fid) || fid_is_idif(fid)) {
+ struct ost_id oi;
+ oi.oi.oi_id = 0; /* gcc 4.7.2 complains otherwise */
+ if (fid_to_ostid(fid, &oi) != 0)
+ return;
+ ostid_build_res_name(&oi, resname);
+ } else {
+ fid_build_reg_res_name(fid, resname);
+ }
+}
+
+static inline void ost_fid_from_resid(struct lu_fid *fid,
+ const struct ldlm_res_id *name,
+ int ost_idx)
+{
+ if (fid_seq_is_mdt0(name->name[LUSTRE_RES_ID_VER_OID_OFF])) {
+ /* old resid */
+ struct ost_id oi;
+ ostid_set_seq(&oi, name->name[LUSTRE_RES_ID_VER_OID_OFF]);
+ ostid_set_id(&oi, name->name[LUSTRE_RES_ID_SEQ_OFF]);
+ ostid_to_fid(fid, &oi, ost_idx);
+ } else {
+ /* new resid */
+ fid_extract_from_res_name(fid, name);
+ }
+}
/**
* Flatten 128-bit FID values into a 64-bit value for use as an inode number.
static inline __u32 fid_hash(const struct lu_fid *f, int bits)
{
- /* all objects with same id and different versions will belong to same
- * collisions list. */
- return cfs_hash_long(fid_flatten(f), bits);
+ /* all objects with same id and different versions will belong to same
+ * collisions list. */
+ return hash_long(fid_flatten(f), bits);
}
/**
RETURN(ino ? ino : fid_oid(fid));
}
+static inline int lu_fid_diff(struct lu_fid *fid1, struct lu_fid *fid2)
+{
+ LASSERTF(fid_seq(fid1) == fid_seq(fid2), "fid1:"DFID", fid2:"DFID"\n",
+ PFID(fid1), PFID(fid2));
+
+ if (fid_is_idif(fid1) && fid_is_idif(fid2))
+ return fid_idif_id(fid1->f_seq, fid1->f_oid, fid1->f_ver) -
+ fid_idif_id(fid2->f_seq, fid2->f_oid, fid2->f_ver);
+
+ return fid_oid(fid1) - fid_oid(fid2);
+}
+
#define LUSTRE_SEQ_SRV_NAME "seq_srv"
#define LUSTRE_SEQ_CTL_NAME "seq_ctl"
dst->lsr_flags = be32_to_cpu(src->lsr_flags);
}
+static inline void range_array_cpu_to_le(struct lu_seq_range_array *dst,
+ const struct lu_seq_range_array *src)
+{
+ int i;
+
+ for (i = 0; i < src->lsra_count; i++)
+ range_cpu_to_le(&dst->lsra_lsr[i], &src->lsra_lsr[i]);
+
+ dst->lsra_count = cpu_to_le32(src->lsra_count);
+}
+
+static inline void range_array_le_to_cpu(struct lu_seq_range_array *dst,
+ const struct lu_seq_range_array *src)
+{
+ int i;
+
+ dst->lsra_count = le32_to_cpu(src->lsra_count);
+ for (i = 0; i < dst->lsra_count; i++)
+ range_le_to_cpu(&dst->lsra_lsr[i], &src->lsra_lsr[i]);
+}
+
/** @} fid */
-#endif /* __LINUX_FID_H */
+#endif /* __LUSTRE_FID_H */
git://git.whamcloud.com / fs / lustre-release.git / blobdiff