.\" -*- nroff -*-
-.\" Copyright 2006 by ClusterFileSystems. All Rights Reserved.
-.\" This file may be copied under the terms of the GNU Public License.
+.\" Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
.\"
-.TH tunefs.lustre 8 "2006 Jun 15" Lustre "configuration utilities"
+.\" Copyright (c) 2011, 2016, Intel Corporation.
+.\"
+.\" This file may be copied under the terms of the GNU Public License, v2.
+.\"
+.TH tunefs.lustre 8 "2008 Mar 15" Lustre "configuration utilities"
.SH NAME
tunefs.lustre \- modify the Lustre configuration information on a disk
.SH SYNOPSIS
.BI \--comment= comment
Set user comment about this disk, ignored by Lustre.
.TP
+.BI \--dryrun
+Only print what would be done; does not affect the disk.
+.TP
+.BI \--erase-param " param"
+Remove all previously stored instances of the parameter \fIparam\fR. Attempts
+to remove a non-existing parameter appear as successful ones.
+.TP
.BI \--erase-params
-Remove all previous parameter info
+Remove all previously stored parameter info.
.TP
.BI \--failnode= nid,...
Set the NID(s) of a failover partner. This option can be repeated as desired.
+Cannot be used with --servicenode.
+.TP
+.BI \--servicenode= nid,....
+Set the NID(s) of all service partner. This option treats all nodes as equal
+service nodes. Cannot be used with --failnode.
.TP
.BI \--fsname= filesystem_name
-The Lustre filesystem this service will be part of. Default is 'lustre'
+The Lustre filesystem this service will be part of. Default is 'lustre'.
.TP
.BI \--index= index
-Force a particular OST or MDT index
+Force a particular OST or MDT index.
.TP
.BI \--mountfsoptions= opts
-Set permanent mount options, equivalent to setting in /etc/fstab
+Set the persistent mount options that will be used when Lustre fs.
+WARNING: unlike earlier versions of \fBtunefs.lustre\fR, this version
+completely replaces the existing mount options with those specified on
+the command line, issuing a warning on stderr if any of the default
+mount options are omitted. The defaults for ldiskfs are
+OST: \fIerrors=remount-ro,mballoc,extents\fR;
+MGS/MDT: \fIerrors=remount-ro,user_xattr\fR.
+\fBDO NOT\fR alter the default mount options unless you know what you are doing.
+.TP
+.BI \--backfs-mount-opts=opts
+Use these options for mounting backing fs while tune.lustre is working.
+.TP
+.BI \--network= net,...
+Network(s) to restrict this ost/mdt to. This option can be repeated as desired.
.TP
.BI \--mgs
-add a configuration management service to this target
+Add a configuration management service to this target.
.TP
.BI \--mgsnode= nid,...
Set the NID(s) of the MGS node, required for all targets other than the MGS.
.TP
-.BI \--noformat
-Only print what would be done; does not affect the disk
-.TP
.BI \--nomgs
-remove a configuration management service to this target
+Remove a configuration management service to this target.
+.TP
+.BI \--param " key=value"
+Set permanent parameter
+.I key
+to value
+.IR value .
+This option can be repeated as desired. All previously stored instances of
+.IR key
+are removed, and new instances specified in the command line are added.
+Typical options might include:
+.RS
+.I \--param sys.timeout=40
+.RS
+System obd timeout
+.RE
+.I \--param lov.stripesize=2M
+.RS
+Default stripe size
+.RE
+.I \--param lov.stripecount=2
+.RS
+Default stripe count
+.RE
+.I \--param failover.mode=failout
+.RS
+Return errors instead of waiting for recovery
+.RE
+.RE
+.TP
+.BI \--force-nohostid
+Ignore unset hostid for ZFS import protection. To set hostid either set
+spl_hostid option for spl.ko or set /etc/hostid, see zgenhostid(8).
.TP
.BI \--quiet
Print less information.
Print more information.
.TP
.BI \--writeconf
-Erase all config logs for the filesystem that this target is part of. This
-is very dangerous.
+Erase the configuration logs for the filesystem that this server is part of, and regenerate them. This is very dangerous. All clients must be unmounted and servers for this filesystem should be stopped.
+All targets (OSTs/MDTs) must then be restarted to regenerate the logs.
+No clients should be started until all targets have restarted.
+.br
+Correct order of operations is:
+.br
+* Unmount all clients of this filesystem.
+.br
+* Unmount MDT and all OSTs of this filesystem.
+.br
+* Run \fBtunefs.lustre --writeconf <device>\fR on every server.
+.br
+* Mount MDT and OSTs.
+.br
+* Mount clients
+.TP
+.BI \--quota
+Enable space accounting on old 2.x devices.
.SH EXAMPLES
.TP
-.B tunefs.lustre --fsname=testfs --mdt --mgs /dev/sda1
-Combined MGS and MDT for filesystem 'testfs' on node e.g. cfs21
+.B tunefs.lustre --erase-params --mgsnode=<new_nid> --writeconf /dev/sda
+Change the MGS NID address. (This should be done on every target disk,
+since they should all be contacting the same MGS.)
.TP
-.B tunefs.lustre --fsname=testfs --ost --mgsnode=cfs21@tcp0 /dev/sdb
-OST for filesystem 'testfs' on any node using the above MGS.
+.B tunefs.lustre --param "failover.node=192.168.0.13@tcp0" /dev/sda
++Remove all previous failover NID locations for this target, and add a new
++failover NID location for this target.
++.TP
++.B tunefs.lustre --erase-param failover.node /dev/sda
++Remove all failover NID locations for this target.
.TP
-.B tunefs.lustre --mgs /dev/sda1
-Standalone MGS on e.g. node cfs22
+.B tunefs.lustre --mgs --mdt --fsname=testfs /dev/sda
+Upgrade an old 1.4.X Lustre MDT to 1.6. The new filesystem name is "testfs".
.TP
-.B tunefs.lustre --fsname=myfs1 --mdt --mgsnode=cfs22@tcp0 /dev/sda2
-MDT for filesystem 'myfs1' on any node, using the above MGS
+.B tunefs.lustre --writeconf --mgs --mdt --fsname=testfs /dev/sda1
+Upgrade an old 1.4.X Lustre MDT to 1.6, and start with brand-new 1.6
+configuration logs. All old servers and clients must be stopped.
-.SH BUGS
-Please report all bugs to ClusterFileSystems, support@clusterfs.com
.SH AVAILABILITY
.B tunefs.lustre
is part of the
.BR Lustre (7)
-filesystem package and is available from CFS
-.br
-http://clusterfs.com
+filesystem package.
.SH SEE ALSO
-.BR Lustre (7),
+.BR lustre (7),
.BR mkfs.lustre (8),
.BR mount.lustre (8),
.BR lctl (8),
git://git.whamcloud.com / fs / lustre-release.git / blobdiff