drop them\. Asymmetrical route is when a message from a remote peer is coming
through a router that would not be used by this node to reach the remote peer\.
.
+.TP
+\fBlnetctl set\fR response_tracking \fI[0, 1, 2, 3]\fR
+Set the behavior of response tracking\.
+ 0 - Only LNet pings and discovery pushes utilize response tracking\.
+ 1 - GETs are eligible for response tracking\.
+ 2 - PUTs are eligible for response tracking\.
+ 3 - Both PUTs and GETs are eligible for response tracking (default)\.
+ Note: Regardless of the value of the response_tracking parameter LNet
+ pings and discovery pushes always utilize response tracking\.
+.
+.TP
+\fBlnetctl set\fR recovery_limit \fIvalue\fR
+Set how long LNet will attempt to recover unhealthy peer interfaces\.
+ 0 - Recover indefinitely (default)\.
+ >0 - Recover for the specified number of seconds\.
+.
.SS "Import and Export YAML Configuration Files"
LNet configuration can be represented in YAML format\. A YAML configuration
file can be passed to the lnetctl utility via the \fBimport\fR command\. The
\-\-show: show configuration
.
.br
+\-\-exec: execute command
+.
+.br
\-\-help: display this help
.
.TP
.
.TP
\fBlnetctl export\fR > \fIFILE\fR
-\fBexport\fR command dumps the supported LNet configuration in YAML format to
-stdout, which can be redirected to a normal file\. The output of the
-\fBimport\fR command can be used as input to the \fBexport\fR command\.
+\fBexport\fR command dumps the LNet configuration, state information, and stats
+in YAML format to stdout, which can be redirected to a normal file\. The output
+of the \fBexport\fR command can be used as input to the \fBimport\fR command\.
+.
+.br
+\-\-backup: dump only elements necessary to recreate the current configuration.
.
.br
\-\-help: display this help
.br
\-> Minimum router credits\.
.
+.SS "UDSP Configuration"
+.
+.TP
+\fBlnetctl udsp\fR add
+Add user-defined selection policy.
+.
+.br
+.
+.TP
+Adding a local network udsp.
+.
+.br
+If multiple local networks are available, each one can be assigned a priority\.
+The one with the highest priority is selected to send on\.
+NID and network matching is using NID-range syntax, please see the manual for more detail\.
+.
+.br
+\-\-src : network in NID-range syntax (e.g. tcp0 or tcp[1-3])
+.
+.br
+\-\-<priority> <priority value>: optional priority value in [0-255], 0 as the highest
+.
+.br
+\-\-<idx>: The index of where to insert the rule\. By default append to the end of the list
+.
+.br
+.
+.TP
+Adding a local NID udsp.
+.
+.br
+Assign priority to local NIDs\. After a local network is chosen, the NI with highest priority is selected\.
+.
+.br
+\-\-src: NID in NID-range syntax (e.g. 10.1.1.2@tcp or 10.1.1.*@tcp)
+.
+.br
+\-\-<priority> <priority value>: optional priority value in [0-255], 0 as the highest
+.
+.br
+\-\-<idx>: The index of where to insert the rule\. By default append to the end of the list
+.
+.br
+.
+.TP
+Adding a peer NID udsp.
+.
+.br
+Assign priority to peer NIDs. Peer NID with highest priority is selected to send to\.
+.
+.br
+\-\-dst: NID in NID-range syntax (e.g. 10.1.1.2@tcp)
+.
+.br
+\-\-<priority> <priority value>: optional priority value in [0-255], 0 as the highest
+.
+.br
+\-\-<idx>: The index of where to insert the rule\. By default append to the end of the list
+.
+.br
+.
+.TP
+Adding a NID pair udsp.
+.
+.br
+The local NIDs which match the rule are added on a list on the peer NIs matching the rule\.
+When selecting the peer NI, the one with the local NID being used on its list is preferred\.
+.
+.br
+\-\-dst: NID in NID-range syntax (e.g. 10.1.1.1@tcp)
+.
+.br
+\-\-src: NID in NID-range syntax (e.g. 10.1.1.2@tcp)
+.
+.br
+\-\-<idx>: The index of where to insert the rule\. By default append to the end of the list
+.
+.br
+.
+.TP
+Adding a Peer Router udsp.
+.
+.br
+The router NIDs matching the rule are added on a list on the peer NIs matching the rule\.
+When sending to a remote peer, the router which has its nid on the peer NI list is preferred\.
+.
+.br
+\-\-dst: peer NID in NID-range syntax (e.g. 10.1.1.1@tcp)
+.
+.br
+\-\-rte: router NID in NID-range syntax (e.g. 10.1.2.1@tcp)
+.
+.br
+\-\-<idx>: The index of where to insert the rule\. By default append to the end of the list
+.
+.br
+.
+.TP
+\fBlnetctl udsp\fR del
+Delete user-defined selection policy.
+.
+.br
+\-\-idx: The index of the rule to delete\.
+.
+.br
+.TP
+\fBlnetctl udsp\fR show
+Show all user-defined selection policies in the system\. The policies are dumped in YAML form\.
+.
+.br
+.
.SH "OPTIONS"
.TP
.B --list-commands
state: NA
.
.br
+.
+.SS "Adding a UDSP"
+.
+.IP "\(bu" 4
+lnetctl udsp add \-\-src tcp \-\-priority 1
+.
+.IP "" 0
+.
+.P
+.
+.SS "Deleting a UDSP"
+.
+.IP "\(bu" 4
+lnetctl udsp del \-\-idx 0
+.
+.IP "" 0
+.
+.P
+.SS "Show UDSPs"
+.
+.IP "\(bu" 4
+lnetctl udsp show
+.
+.IP "" 0
+.
+.P
+udsp:
+.
+.br
+ \- idx: 0
+.
+.br
+ src: tcp
+.
+.br
+ dst: NA
+.
+.br
+ rte: NA
+.
+.br
+ action:
+.
+.br
+ priority: 0
+.
+.br
.SH SEE ALSO
.BR lustre (7)
git://git.whamcloud.com / fs / lustre-release.git / blobdiff