From a list of nids for a remote node, show which interface communication
will take place on.
.TP
+.BI replace_nids " <devicename> <nid1>[,nid2,nid3 ...]"
+Replace the LNET Network Identifiers for a given device,
+as when the server's IP address has changed.
+This command must be run on the MGS node.
+Only MGS server should be started (command execution returns error
+in another cases). To start the MGS service only:
+mount -t lustre <MDT partition> -o nosvc <mount point>
+Note the replace_nids command skips any invalidated records in the configuration log.
+The previous log is backed up with the suffix '.bak'.
+.TP
.BI ping " <nid> "
Check LNET connectivity via an LNET ping. This will use the fabric
appropriate to the specified NID.
.PP
.SS Device Operations
.TP
+.BI list_param " [-F|-R] <param_search ...>"
+List the Lustre or LNet parameter name
+.B -F
+Add '/', '@' or '=' for dirs, symlinks and writeable files, respectively.
+.br
+.B -R
+Recursively list all parameters under the specified parameter search string. If
+.I param_search
+is unspecified, all the parameters will be shown.
+.br
+.B Examples:
+.br
+.B
+# lctl list_param ost.*
+.br
+ ost.OSS
+.br
+ ost.num_refs
+.br
+.B
+# lctl list_param -F ost.* debug
+.br
+ ost.OSS/
+.br
+ ost.num_refs
+.br
+ debug=
+.br
+.B
+# lctl list_param -R mdt
+.br
+ mdt
+.br
+ mdt.lustre-MDT0000
+.br
+ mdt.lustre-MDT0000.capa
+.br
+ mdt.lustre-MDT0000.capa_count
+.br
+ mdt.lustre-MDT0000.capa_key_timeout
+.br
+ mdt.lustre-MDT0000.capa_timeout
+.br
+ mdt.lustre-MDT0000.commit_on_sharing
+.br
+ mdt.lustre-MDT0000.evict_client
+.br
+ ...
+.TP
+.BI get_param " [-n|-N|-F] <parameter ...>"
+Get the value of Lustre or LNET parameter.
+.br
+.B -n
+Print only the value and not parameter name.
+.br
+.B -N
+Print only matched parameter names and not the values. (Especially useful when using patterns.)
+.br
+.B -F
+When -N specified, add '/', '@' or '=' for directories, symlinks and writeable files, respectively.
+.br
+.B Examples:
+.br
+.B
+# lctl get_param ost.*
+.br
+ ost.OSS
+.br
+ ost.num_refs
+.br
+.B
+# lctl get_param -n debug timeout
+.br
+ super warning dlmtrace error emerg ha rpctrace vfstrace config console
+.br
+ 20
+.br
+.B
+# lctl get_param -N ost.* debug
+.br
+ ost.OSS
+.br
+ ost.num_refs
+.br
+ debug
+.br
+lctl "get_param -NF" is equivalent to "list_param -F".
+.TP
+.BI set_param " [-n] [-P] [-d] <parameter=value ...>"
+Set the value of Lustre or LNET parameter.
+.br
+.B -n
+Disable printing of the key name when printing values.
+.br
+.B -P
+Set the parameter permanently, filesystem-wide.
+This parameters are only visible to 2.5.0 and later clients, older clients will not see these parameters.
+.br
+.B -d
+Remove the permanent setting (only with -P option)
+.br
+.B Examples:
+.br
+.B
+# lctl set_param fail_loc=0 timeout=20
+.br
+ fail_loc=0
+.br
+ timeout=20
+.br
+.B
+# lctl set_param -n fail_loc=0 timeout=20
+.br
+ 0
+.br
+ 20
+.br
+.B
+# lctl set_param -P osc.*.max_dirty_mb=32
+.br
+.TP
.BI conf_param " [-d] <device|fsname>.<parameter>=<value>"
Set a permanent configuration parameter for any device via the MGS. This
command must be run on the MGS node.
.BI changelog_deregister " <id>"
Unregister an existing changelog user. If the user's "clear" record number
is the minimum for the device, changelog records will be purged until the
-next minimum.
+next minimum.
.PP
+.SS LFSCK
+An on-line Lustre consistency check and repair tool.
+.TP
+.B lfsck_start \fR<-M | --device [MDT,OST]_device>
+ \fR[-e | --error <error_handle>]
+ \fR[-h | --help]
+ \fR[-n | --dryrun <switch>]
+ \fR[-r | --reset]
+ \fR[-s | --speed <speed_limit>]
+ \fR[-A | --all]
+ \fR[-t | --type <lfsck_type[,lfsck_type...]>]
+ \fR[-w | --windows <win_size>]
+ \fR[-o | --orphan]
+.br
+Start LFSCK on the specified MDT or OST device with specified parameters.
+.TP
+ -M, --device <MDT,OST_device>
+The MDT or OST device to start LFSCK/scrub on.
+.TP
+ -e, --error <error_handle>
+With error_handle as 'abort' LFSCK will stop if a repair is impossible. If no
+value is specified, the saved value will be used if resuming from a checkpoint.
+Otherwise the default behavior is to 'continue' if a repair is impossible.
+.TP
+ -h, --help
+Show this help.
+.TP
+ -n, --dryrun <on|off>
+Perform a trial run with no changes made. Default is 'off'
+.TP
+ -r, --reset
+Set the current position of object iteration to the beginning of the specified
+MDT. By default the iterator will resume scanning from the last checkpoint
+(saved periodically by LFSCK) provided it is available.
+.TP
+ -s, --speed <speed_limit>
+Set the upper limit of LFSCK processing in objects per second. If no value is
+specified the saved value is used (if resuming from a check point). Otherwise
+the default value of 0 is used. 0 means run as fast as possible.
+.TP
+ -A, --all
+Start LFSCK on all devices.
+.TP
+ -t, --type <lfsck_type[,lfsck_type...]>
+The type of LFSCK checking/repair to execute. By default, the LFSCK
+component(s) which ran last time and did not finish or the component(s)
+corresponding to some known system inconsistency, will be started. Anytime
+LFSCK is triggered on an ldiskfs MDT or OST, the OI Scrub is executed.
+Alternative types include FID-in-dirent and linkEA (namespace) and MDT-OST
+inconsistency (layout).
+.TP
+ -w, --windows
+The window size for async requests pipeline.
+.TP
+ -o, --orphan
+Handle orphan objects, such as orphan OST-objects for layout LFSCK.
+.TP
+.B lfsck_stop \fR<-M | --device [MDT,OST]_device>
+ \fR[-A | --all]
+ \fR[-h | --help]
+Stop LFSCK on the specified MDT or OST device.
+.TP
+ -M, --device <[MDT,OST]_device>
+The MDT or OST device to stop LFSCK/scrub on.
+.TP
+ -A, --all
+Stop LFSCK on all devices.
+.TP
+ -h, --help
+Show this help.
.SS Debug
.TP
.BI debug_daemon
.br
lctl > quit
-.SH BUGS
-Please report all bugs to Sun Microsystems, Inc. http://bugzilla.lustre.org/
.SH AVAILABILITY
.B lctl
is part of the
.BR Lustre (7)
-filesystem package and is available from Sun Microsystems, Inc.
-.br
-http://www.sun.com/software/products/lustre/index.xml
+filesystem package.
.SH SEE ALSO
.BR Lustre (7),
.BR mkfs.lustre (8),
git://git.whamcloud.com / fs / lustre-release.git / blobdiff