SUBDIRS := @LDISKFS_SUBDIR@ \
. \
- @SNMP_SUBDIR@ \
@LUSTREIOKIT_SUBDIR@ \
@LIBCFS_SUBDIR@ \
+ @SNMP_SUBDIR@ \
lnet \
lustre
DIST_SUBDIRS := ldiskfs \
- @SNMP_DIST_SUBDIR@ \
lustre-iokit \
@LIBCFS_SUBDIR@ \
+ @SNMP_DIST_SUBDIR@ \
lnet \
lustre \
config contrib
if LINUX
all-am: modules
-modules: ldiskfs-sources lustre-sources module-symvers
+modules: undef.h ldiskfs-sources lustre-sources
$(MAKE) CC="$(CC)" $(CROSS_VARS) -C $(LINUX_OBJ) \
-f $(PWD)/build/Makefile LUSTRE_LINUX_CONFIG=$(LINUX_CONFIG) \
LINUXINCLUDE='-I$$(srctree)/arch/$$(SRCARCH)/include -Iarch/$$(SRCARCH)/include/generated -Iinclude $$(if $$(KBUILD_SRC),-Iinclude2 -I$$(srctree)/include) -I$$(srctree)/arch/$$(SRCARCH)/include/uapi -Iarch/$$(SRCARCH)/include/generated/uapi -I$$(srctree)/include/uapi -Iinclude/generated/uapi -include $(CONFIG_INCLUDE)' \
endif # MODULES
-dist-hook:
+undef.h: config.h.in
+ grep -v config.h.in config.h.in > $@
+
+dist-hook: undef.h
find $(distdir) -name .deps -o \
-name CVS -o \
-name .svn -o \
EXTRA_DIST = @PACKAGE_TARNAME@.spec \
build/Makefile \
build/Rules.in \
- build/gen_filelist.sh
+ build/gen_filelist.sh \
+ config.h.in \
+ undef.h \
+ lustre-dkms_pre-build.sh \
+ lustre-dkms_post-build.sh
+
+rpm-local:
+ @(if test -z "$(RPMBUILD)"; then \
+ echo -e "\n" \
+ "*** Required util 'rpmbuild' missing. Please install the\n" \
+ "*** package for your distribution which provides 'rpmbuild',\n" \
+ "*** re-run configure, and try again.\n"; \
+ exit 1; \
+ fi; \
+ $(MKDIR_P) $(rpmbuilddir)/TMP && \
+ $(MKDIR_P) $(rpmbuilddir)/BUILD && \
+ $(MKDIR_P) $(rpmbuilddir)/RPMS && \
+ $(MKDIR_P) $(rpmbuilddir)/SRPMS && \
+ $(MKDIR_P) $(rpmbuilddir)/SPECS && \
+ $(MKDIR_P) $(rpmbuilddir)/SOURCES)
+
+if SERVER
+DKMS_PACKAGE=$(PACKAGE)
+DKMS_SERVER=--with servers
+else
+DKMS_PACKAGE=$(PACKAGE)-client
+DKMS_SERVER=--without servers
+endif
-rpms: @PACKAGE_TARNAME@.spec dist Makefile
- rpmbuild @RPMBUILD_BINARY_ARGS@ -ta $(distdir).tar.gz
+# Only zfs Lustre DKMS Server is supported, so previous configure command
+# must use related parameters for success.
+dkms-srpm: $(PACKAGE)-dkms.spec dist Makefile
+ rpmbuilddir=`mktemp -t -d rpmbuild-@PACKAGE@-$$USER-XXXXXXXX`; \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ rpmbuilddir="$$rpmbuilddir" rpm-local || exit 1; \
+ $(RPMBUILD) \
+ --define "_tmppath $$rpmbuilddir/TMP" \
+ --define "_topdir $$rpmbuilddir" \
+ --define "_sourcedir $(top_srcdir)" \
+ $(DKMS_SERVER) \
+ --bs $(PACKAGE)-dkms.spec || exit 1; \
+ cp $$rpmbuilddir/SRPMS/*.src.rpm $(top_srcdir) || exit 1; \
+ rm -rf $$rpmbuilddir
+
+dkms-rpm: dkms-srpm
+ rpmbuilddir=`mktemp -t -d rpmbuild-@PACKAGE@-$$USER-XXXXXXXX`; \
+ $(RPMBUILD) \
+ --define "_tmppath $$rpmbuilddir/TMP" \
+ --define "_topdir $$rpmbuilddir" \
+ @RPMBUILD_BINARY_ARGS@ \
+ --rebuild $(DKMS_PACKAGE)-dkms-*.src.rpm || exit 1; \
+ cp $$rpmbuilddir/RPMS/*/*.rpm $(top_srcdir) || exit 1; \
+ rm -rf $$rpmbuilddir
+
+rpms: srpm
+ rpmbuilddir=`mktemp -t -d rpmbuild-@PACKAGE@-$$USER-XXXXXXXX`; \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ rpmbuilddir="$$rpmbuilddir" rpm-local || exit 1; \
+ $(RPMBUILD) \
+ --define "_tmppath $$rpmbuilddir/TMP" \
+ --define "_topdir $$rpmbuilddir" \
+ @RPMBUILD_BINARY_ARGS@ \
+ --rebuild $(distdir)-*.src.rpm || exit 1; \
+ cp $$rpmbuilddir/RPMS/*/*.rpm $(top_srcdir) || exit 1; \
+ rm -rf $$rpmbuilddir
srpm: @PACKAGE_TARNAME@.spec dist Makefile
- rpmbuild @RPMBUILD_SOURCE_ARGS@ -ts $(distdir).tar.gz
+ rpmbuilddir=`mktemp -t -d rpmbuild-@PACKAGE@-$$USER-XXXXXXXX`; \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ rpmbuilddir="$$rpmbuilddir" rpm-local || exit 1; \
+ $(RPMBUILD) \
+ --define "_tmppath $$rpmbuilddir/TMP" \
+ --define "_topdir $$rpmbuilddir" \
+ --define "build_src_rpm 1" \
+ --define "dist %{nil}" \
+ -ts $(distdir).tar.gz || exit 1; \
+ cp $$rpmbuilddir/SRPMS/$(distdir)-*.src.rpm $(top_srcdir) || exit 1; \
+ rm -rf $$rpmbuilddir
# In the debs target, first make sure what's in the changelog reflects
# the software version. Here's how we could dig the version out of the
# However, one cannot really run "make debs" without having done a
# configure first, so we could use the easier method of digging the
# version out of the config.h file.
-debs:
+debs: undef.h
lversion=$$(sed -ne 's/^#define VERSION "\(.*\)"$$/\1/p' config.h); \
cversion=$$(sed -ne '1s/^lustre (\(.*\)-[0-9][0-9]*).*$$/\1/p' debian/changelog); \
if [ "$$lversion" != "$$cversion" ]; then \
echo "lustre" > usr_share_modass/compliant.list && \
export MA_DIR=$$(pwd)/usr_share_modass && \
KVERS=$${KVERS:-$(LINUXRELEASE)} && \
- [ "x@ENABLEO2IB@" != "x" ] && \
- export IB_OPTIONS="--with-o2ib=@O2IBPATHS@" && \
+ if test "x@ENABLEO2IB@" = "xno"; then \
+ export IB_OPTIONS="--with-o2ib=no"; \
+ else \
+ if test -n "@O2IBPATH@"; then \
+ export IB_OPTIONS="--with-o2ib=@O2IBPATH@"; \
+ fi; \
+ fi; \
export KSRC_TREE=$(LINUX) && \
KSRC=$${KSRC:-$(LINUX_OBJ)} && \
m-a build $${KSRC:+-k $$KSRC} $${KVERS:+-l $$KVERS} -i -u $$(pwd) lustre && \
../lustre_$${VER}_*.changes ../lustre_$${VER}.tar.gz \
../lustre-client-modules-$${KVERS}_$${VER}_*.deb debs/
-EXTRA_DIST += config.h.in
-
if USES_DPKG
EXTRA_DIST += debian/*
endif
-module-symvers-zfs:
-if ZFS_ENABLED
- @if [ -f @SPL_OBJ@/@SPL_SYMBOLS@ ]; then \
- cat @SPL_OBJ@/@SPL_SYMBOLS@ >>@SYMVERFILE@; \
- elif [ -f @SPL_OBJ@/module/@SPL_SYMBOLS@ ]; then \
- cat @SPL_OBJ@/module/@SPL_SYMBOLS@ >>@SYMVERFILE@; \
- else \
- echo -e "\n" \
- "*** Missing spl symbols. Ensure you have built spl:\n" \
- "*** - @SPL_OBJ@/@SYMVERFILE@\n"; \
- exit 1; \
- fi
- @if [ -f @ZFS_OBJ@/@ZFS_SYMBOLS@ ]; then \
- cat @ZFS_OBJ@/@ZFS_SYMBOLS@ >>@SYMVERFILE@; \
- elif [ -f @ZFS_OBJ@/module/@ZFS_SYMBOLS@ ]; then \
- cat @ZFS_OBJ@/module/@ZFS_SYMBOLS@ >>@SYMVERFILE@; \
- else \
- echo -e "\n" \
- "*** Missing zfs symbols. Ensure you have built zfs:\n" \
- "*** - @ZFS_OBJ@/@SYMVERFILE@\n"; \
- exit 1; \
- fi
-endif # ZFS_ENABLED
-
-module-symvers: module-symvers-zfs
-
CSTK=/tmp/checkstack
CSTKO=/tmp/checkstack.orig
git://git.whamcloud.com / fs / lustre-release.git / blobdiff