/* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*- * vim:expandtab:shiftwidth=8:tabstop=8: * * GPL HEADER START * * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 only, * as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License version 2 for more details (a copy is included * in the LICENSE file that accompanied this code). * * You should have received a copy of the GNU General Public License * version 2 along with this program; If not, see * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, * CA 95054 USA or visit www.sun.com if you need additional information or * have any questions. * * GPL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved * Use is subject to license terms. */ /* * This file is part of Lustre, http://www.lustre.org/ * Lustre is a trademark of Sun Microsystems, Inc. * * lustre/utils/mkfs_lustre.c * * Author: Nathan Rutman */ /* This source file is compiled into both mkfs.lustre and tunefs.lustre */ #if HAVE_CONFIG_H # include "config.h" #endif /* HAVE_CONFIG_H */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __linux__ /* libcfs.h is not really needed here, but on SLES10/PPC, fs.h includes idr.h which * requires BITS_PER_LONG to be defined */ #include #include /* for BLKGETSIZE64 */ #include #endif #include #include #include #include #include "mount_utils.h" #ifndef PATH_MAX #define PATH_MAX 4096 #endif #define MAX_LOOP_DEVICES 16 #define L_BLOCK_SIZE 4096 #define INDEX_UNASSIGNED 0xFFFF #define MO_IS_LOOP 0x01 #define MO_FORCEFORMAT 0x02 /* used to describe the options to format the lustre disk, not persistent */ struct mkfs_opts { struct lustre_disk_data mo_ldd; /* to be written in MOUNT_DATA_FILE */ char mo_device[128]; /* disk device name */ char mo_mkfsopts[128]; /* options to the backing-store mkfs */ char mo_loopdev[128]; /* in case a loop dev is needed */ __u64 mo_device_sz; /* in KB */ int mo_stripe_count; int mo_flags; int mo_mgs_failnodes; }; char *progname; int verbose = 1; static int print_only = 0; static int failover = 0; static int upgrade_to_18 = 0; void usage(FILE *out) { fprintf(out, "%s v"LUSTRE_VERSION_STRING"\n", progname); fprintf(out, "usage: %s [options] \n", progname); fprintf(out, "\t:block device or file (e.g /dev/sda or /tmp/ost1)\n" "\ttarget types:\n" "\t\t--ost: object storage, mutually exclusive with mdt,mgs\n" "\t\t--mdt: metadata storage, mutually exclusive with ost\n" "\t\t--mgs: configuration management service - one per site\n" "\toptions (in order of popularity):\n" "\t\t--mgsnode=[,<...>] : NID(s) of a remote mgs node\n" "\t\t\trequired for all targets other than the mgs node\n" "\t\t--fsname= : default is 'lustre'\n" "\t\t--failnode=[,<...>] : NID(s) of a failover partner\n" "\t\t--param = : set a permanent parameter\n" "\t\t\te.g. --param sys.timeout=40\n" "\t\t\t --param lov.stripesize=2M\n" "\t\t--index=#N : target index (i.e. ost index within the lov)\n" /* FIXME implement 1.6.x "\t\t--configdev=: store configuration info\n" "\t\t\tfor this device on an alternate device\n" */ "\t\t--comment=: arbitrary user string (%d bytes)\n" "\t\t--mountfsoptions= : permanent mount options\n" #ifndef TUNEFS "\t\t--backfstype= : backing fs type (ext3, ldiskfs)\n" "\t\t--device-size=#N(KB) : device size for loop devices\n" "\t\t--mkfsoptions= : format options\n" "\t\t--reformat: overwrite an existing disk\n" "\t\t--stripe-count-hint=#N : used for optimizing MDT inode size\n" "\t\t--iam-dir: make use of IAM directory format on backfs, incompatible with ext3.\n" #else "\t\t--erase-params : erase all old parameter settings\n" "\t\t--nomgs: turn off MGS service on this MDT\n" "\t\t--writeconf: erase all config logs for this fs.\n" #endif "\t\t--dryrun: just report what we would do; " "don't write to disk\n" "\t\t--verbose : e.g. show mkfs progress\n" "\t\t--quiet\n", (int)sizeof(((struct lustre_disk_data *)0)->ldd_userdata)); return; } #define vprint if (verbose > 0) printf #define verrprint if (verbose >= 0) printf /*================ utility functions =====================*/ char *strscat(char *dst, char *src, int buflen) { dst[buflen - 1] = 0; if (strlen(dst) + strlen(src) >= buflen) { fprintf(stderr, "string buffer overflow (max %d): '%s' + '%s'" "\n", buflen, dst, src); exit(EOVERFLOW); } return strcat(dst, src); } char *strscpy(char *dst, char *src, int buflen) { dst[0] = 0; return strscat(dst, src, buflen); } inline unsigned int dev_major (unsigned long long int __dev) { return ((__dev >> 8) & 0xfff) | ((unsigned int) (__dev >> 32) & ~0xfff); } inline unsigned int dev_minor (unsigned long long int __dev) { return (__dev & 0xff) | ((unsigned int) (__dev >> 12) & ~0xff); } int get_os_version() { static int version = 0; if (!version) { int fd; char release[4] = ""; fd = open("/proc/sys/kernel/osrelease", O_RDONLY); if (fd < 0) fprintf(stderr, "%s: Warning: Can't resolve kernel " "version, assuming 2.6\n", progname); else { if (read(fd, release, 4) < 0) { fprintf(stderr, "reading from /proc/sys/kernel" "/osrelease: %s\n", strerror(errno)); close(fd); exit(-1); } close(fd); } if (strncmp(release, "2.4.", 4) == 0) version = 24; else version = 26; } return version; } static int check_mtab_entry(char *spec) { FILE *fp; struct mntent *mnt; fp = setmntent(MOUNTED, "r"); if (fp == NULL) return(0); while ((mnt = getmntent(fp)) != NULL) { if (strcmp(mnt->mnt_fsname, spec) == 0) { endmntent(fp); fprintf(stderr, "%s: according to %s %s is " "already mounted on %s\n", progname, MOUNTED, spec, mnt->mnt_dir); return(EEXIST); } } endmntent(fp); return(0); } /*============ disk dev functions ===================*/ /* Setup a file in the first unused loop_device */ int loop_setup(struct mkfs_opts *mop) { char loop_base[20]; char l_device[64]; int i, ret = 0; /* Figure out the loop device names */ if (!access("/dev/loop0", F_OK | R_OK)) { strcpy(loop_base, "/dev/loop\0"); } else if (!access("/dev/loop/0", F_OK | R_OK)) { strcpy(loop_base, "/dev/loop/\0"); } else { fprintf(stderr, "%s: can't access loop devices\n", progname); return EACCES; } /* Find unused loop device */ for (i = 0; i < MAX_LOOP_DEVICES; i++) { char cmd[PATH_MAX]; int cmdsz = sizeof(cmd); sprintf(l_device, "%s%d", loop_base, i); if (access(l_device, F_OK | R_OK)) break; snprintf(cmd, cmdsz, "losetup %s > /dev/null 2>&1", l_device); ret = system(cmd); /* losetup gets 1 (ret=256) for non-set-up device */ if (ret) { /* Set up a loopback device to our file */ snprintf(cmd, cmdsz, "losetup %s %s", l_device, mop->mo_device); ret = run_command(cmd, cmdsz); if (ret == 256) /* someone else picked up this loop device * behind our back */ continue; if (ret) { fprintf(stderr, "%s: error %d on losetup: %s\n", progname, ret, strerror(ret)); return ret; } strscpy(mop->mo_loopdev, l_device, sizeof(mop->mo_loopdev)); return ret; } } fprintf(stderr, "%s: out of loop devices!\n", progname); return EMFILE; } int loop_cleanup(struct mkfs_opts *mop) { char cmd[150]; int ret = 1; if ((mop->mo_flags & MO_IS_LOOP) && *mop->mo_loopdev) { sprintf(cmd, "losetup -d %s", mop->mo_loopdev); ret = run_command(cmd, sizeof(cmd)); } return ret; } /* Determine if a device is a block device (as opposed to a file) */ int is_block(char* devname) { struct stat st; int ret = 0; ret = access(devname, F_OK); if (ret != 0) return 0; ret = stat(devname, &st); if (ret != 0) { fprintf(stderr, "%s: cannot stat %s\n", progname, devname); return -1; } return S_ISBLK(st.st_mode); } __u64 get_device_size(char* device) { int ret, fd; __u64 size = 0; fd = open(device, O_RDONLY); if (fd < 0) { fprintf(stderr, "%s: cannot open %s: %s\n", progname, device, strerror(errno)); return 0; } #ifdef BLKGETSIZE64 /* size in bytes. bz5831 */ ret = ioctl(fd, BLKGETSIZE64, (void*)&size); #else { __u32 lsize = 0; /* size in blocks */ ret = ioctl(fd, BLKGETSIZE, (void*)&lsize); size = (__u64)lsize * 512; } #endif close(fd); if (ret < 0) { fprintf(stderr, "%s: size ioctl failed: %s\n", progname, strerror(errno)); return 0; } vprint("device size = "LPU64"MB\n", size >> 20); /* return value in KB */ return size >> 10; } int loop_format(struct mkfs_opts *mop) { int ret = 0; if (mop->mo_device_sz == 0) { fatal(); fprintf(stderr, "loop device requires a --device-size= " "param\n"); return EINVAL; } ret = creat(mop->mo_device, S_IRUSR|S_IWUSR); if (ret < 0) { ret = errno; fprintf(stderr, "%s: Unable to create backing store: %d\n", progname, ret); } else { close(ret); } ret = truncate(mop->mo_device, mop->mo_device_sz * 1024); if (ret != 0) { ret = errno; fprintf(stderr, "%s: Unable to truncate backing store: %d\n", progname, ret); } return ret; } /* Display the need for the latest e2fsprogs to be installed. make_backfs * indicates if the caller is make_lustre_backfs() or not. */ static void disp_old_e2fsprogs_msg(const char *feature, int make_backfs) { static int msg_displayed; if (msg_displayed) { fprintf(stderr, "WARNING: %s does not support %s " "feature.\n\n", E2FSPROGS, feature); return; } msg_displayed++; fprintf(stderr, "WARNING: The %s package currently installed on " "your system does not support \"%s\" feature.\n", E2FSPROGS, feature); #if !(HAVE_LDISKFSPROGS) fprintf(stderr, "Please install the latest version of e2fsprogs from\n" "http://downloads.lustre.org/public/tools/e2fsprogs/\n" "to enable this feature.\n"); #endif if (make_backfs) fprintf(stderr, "Feature will not be enabled until %s" "is updated and '%s -O %s %%{device}' " "is run.\n\n", E2FSPROGS, TUNE2FS, feature); } /* Check whether the file exists in the device */ static int file_in_dev(char *file_name, char *dev_name) { FILE *fp; char debugfs_cmd[256]; unsigned int inode_num; int i; /* Construct debugfs command line. */ snprintf(debugfs_cmd, sizeof(debugfs_cmd), "%s -c -R 'stat %s' '%s' 2>&1 | egrep '(Inode|unsupported)'", DEBUGFS, file_name, dev_name); fp = popen(debugfs_cmd, "r"); if (!fp) { fprintf(stderr, "%s: %s\n", progname, strerror(errno)); return 0; } if (fscanf(fp, "Inode: %u", &inode_num) == 1) { /* exist */ pclose(fp); return 1; } i = fread(debugfs_cmd, 1, sizeof(debugfs_cmd), fp); if (i) { debugfs_cmd[i] = 0; fprintf(stderr, "%s", debugfs_cmd); if (strstr(debugfs_cmd, "unsupported feature")) { disp_old_e2fsprogs_msg("an unknown", 0); } pclose(fp); return -1; } pclose(fp); return 0; } /* Check whether the device has already been used with lustre */ static int is_lustre_target(struct mkfs_opts *mop) { int rc; vprint("checking for existing Lustre data: "); if ((rc = file_in_dev(MOUNT_DATA_FILE, mop->mo_device))) { vprint("found %s\n", (rc == 1) ? MOUNT_DATA_FILE : "extents"); /* in the -1 case, 'extents' means this really IS a lustre target */ return rc; } if ((rc = file_in_dev(LAST_RCVD, mop->mo_device))) { vprint("found %s\n", LAST_RCVD); return rc; } vprint("not found\n"); return 0; /* The device is not a lustre target. */ } /* Check if a certain feature is supported by e2fsprogs. * Firstly we try to use "debugfs supported_features" command to check if * the feature is supported. If this fails we try to set this feature with * mke2fs to check for its support. */ static int is_e2fsprogs_feature_supp(const char *feature) { FILE *fp; char cmd[PATH_MAX]; char imgname[] = "/tmp/test-img-XXXXXX"; int fd = -1; int ret = 0; snprintf(cmd, sizeof(cmd), "%s -c -R \"supported_features %s\" 2>&1", DEBUGFS, feature); /* Using popen() instead of run_command() since debugfs does not return * proper error code if command is not supported */ fp = popen(cmd, "r"); if (!fp) { fprintf(stderr, "%s: %s\n", progname, strerror(errno)); return 0; } ret = fread(cmd, 1, sizeof(cmd), fp); if (ret > 0) { if (strstr(cmd, feature) && !(strstr(cmd, "Unknown"))) return 0; } if ((fd = mkstemp(imgname)) < 0) return -1; snprintf(cmd, sizeof(cmd), "%s -F -O %s %s 100 >/dev/null 2>&1", MKE2FS, feature, imgname); /* run_command() displays the output of mke2fs when it fails for * some feature, so use system() directly */ ret = system(cmd); if (fd >= 0) remove(imgname); return ret; } static void disp_old_kernel_msg(char *feature) { fprintf(stderr, "WARNING: ldiskfs filesystem does not support \"%s\" " "feature.\n\n", feature); } static void enable_default_backfs_features(struct mkfs_opts *mop) { struct utsname uts; int maj_high, maj_low, min; int ret; if (IS_MDT(&mop->mo_ldd)) strscat(mop->mo_mkfsopts, " -O dir_index,extents,dirdata", sizeof(mop->mo_mkfsopts)); else strscat(mop->mo_mkfsopts, " -O dir_index,extents", sizeof(mop->mo_mkfsopts)); /* Upstream e2fsprogs called our uninit_groups feature uninit_bg, * check for both of them when testing e2fsprogs features. */ if (is_e2fsprogs_feature_supp("uninit_groups") == 0) strscat(mop->mo_mkfsopts, ",uninit_groups", sizeof(mop->mo_mkfsopts)); else if (is_e2fsprogs_feature_supp("uninit_bg") == 0) strscat(mop->mo_mkfsopts, ",uninit_bg", sizeof(mop->mo_mkfsopts)); else disp_old_e2fsprogs_msg("uninit_bg", 1); ret = uname(&uts); if (ret) return; sscanf(uts.release, "%d.%d.%d", &maj_high, &maj_low, &min); printf("%d %d %d\n", maj_high, maj_low, min); /* Multiple mount protection is enabled only if failover node is * specified and if kernel version is higher than 2.6.9 */ if (failover) { if (KERNEL_VERSION(maj_high, maj_low, min) >= KERNEL_VERSION(2,6,9)) { if (is_e2fsprogs_feature_supp("mmp") == 0) strscat(mop->mo_mkfsopts, ",mmp", sizeof(mop->mo_mkfsopts)); else disp_old_e2fsprogs_msg("mmp", 1); } else { disp_old_kernel_msg("mmp"); } } } /* Build fs according to type */ int make_lustre_backfs(struct mkfs_opts *mop) { __u64 device_sz = mop->mo_device_sz, block_count = 0; char mkfs_cmd[PATH_MAX]; char buf[64]; char *dev; int ret = 0; if (!(mop->mo_flags & MO_IS_LOOP)) { mop->mo_device_sz = get_device_size(mop->mo_device); if (mop->mo_device_sz == 0) return ENODEV; /* Compare to real size */ if (device_sz == 0 || device_sz > mop->mo_device_sz) device_sz = mop->mo_device_sz; else mop->mo_device_sz = device_sz; } if (mop->mo_device_sz != 0) { if (mop->mo_device_sz < 8096){ fprintf(stderr, "%s: size of filesystem must be larger " "than 8MB, but is set to %lldKB\n", progname, (long long)mop->mo_device_sz); return EINVAL; } block_count = mop->mo_device_sz / (L_BLOCK_SIZE >> 10); } if ((mop->mo_ldd.ldd_mount_type == LDD_MT_EXT3) || (mop->mo_ldd.ldd_mount_type == LDD_MT_LDISKFS) || (mop->mo_ldd.ldd_mount_type == LDD_MT_LDISKFS2)) { /* Journal size in MB */ if (strstr(mop->mo_mkfsopts, "-J") == NULL) { /* Choose our own default journal size */ long journal_sz = 0, max_sz; if (device_sz > 1024 * 1024) /* 1GB */ journal_sz = (device_sz / 102400) * 4; /* cap journal size at 1GB */ if (journal_sz > 1024L) journal_sz = 1024L; /* man mkfs.ext3 */ max_sz = (102400 * L_BLOCK_SIZE) >> 20; /* 400MB */ if (journal_sz > max_sz) journal_sz = max_sz; if (journal_sz) { sprintf(buf, " -J size=%ld", journal_sz); strscat(mop->mo_mkfsopts, buf, sizeof(mop->mo_mkfsopts)); } } /* Bytes_per_inode: disk size / num inodes */ if (strstr(mop->mo_mkfsopts, "-i") == NULL) { long bytes_per_inode = 0; if (IS_MDT(&mop->mo_ldd)) bytes_per_inode = 4096; /* Allocate fewer inodes on large OST devices. Most filesystems can be much more aggressive than even this. */ if ((IS_OST(&mop->mo_ldd) && (device_sz > 100000000))) bytes_per_inode = 16384; /* > 100 Gb device */ if (bytes_per_inode > 0) { sprintf(buf, " -i %ld", bytes_per_inode); strscat(mop->mo_mkfsopts, buf, sizeof(mop->mo_mkfsopts)); } } /* Inode size (for extended attributes). The LOV EA size is * 32 (EA hdr) + 32 (lov_mds_md) + stripes * 24 (lov_ost_data), * and we want some margin above that for ACLs, other EAs... */ if (strstr(mop->mo_mkfsopts, "-I") == NULL) { long inode_size = 0; if (IS_MDT(&mop->mo_ldd)) { if (mop->mo_stripe_count > 72) inode_size = 512; /* bz 7241 */ /* cray stripes across all osts (>60) */ else if (mop->mo_stripe_count > 32) inode_size = 2048; else if (mop->mo_stripe_count > 10) inode_size = 1024; else inode_size = 512; } else if (IS_OST(&mop->mo_ldd)) { /* now as we store fids in EA on OST we need to make inode bigger */ inode_size = 256; } if (inode_size > 0) { sprintf(buf, " -I %ld", inode_size); strscat(mop->mo_mkfsopts, buf, sizeof(mop->mo_mkfsopts)); } } if (verbose < 2) { strscat(mop->mo_mkfsopts, " -q", sizeof(mop->mo_mkfsopts)); } if (strstr(mop->mo_mkfsopts, "-O") == NULL) enable_default_backfs_features(mop); /* Allow reformat of full devices (as opposed to partitions.) We already checked for mounted dev. */ strscat(mop->mo_mkfsopts, " -F", sizeof(mop->mo_mkfsopts)); snprintf(mkfs_cmd, sizeof(mkfs_cmd), "%s -j -b %d -L %s ", MKE2FS, L_BLOCK_SIZE, mop->mo_ldd.ldd_svname); } else if (mop->mo_ldd.ldd_mount_type == LDD_MT_REISERFS) { long journal_sz = 0; /* FIXME default journal size */ if (journal_sz > 0) { sprintf(buf, " --journal_size %ld", journal_sz); strscat(mop->mo_mkfsopts, buf, sizeof(mop->mo_mkfsopts)); } snprintf(mkfs_cmd, sizeof(mkfs_cmd), "mkreiserfs -ff "); } else { fprintf(stderr,"%s: unsupported fs type: %d (%s)\n", progname, mop->mo_ldd.ldd_mount_type, MT_STR(&mop->mo_ldd)); return EINVAL; } /* For loop device format the dev, not the filename */ dev = mop->mo_device; if (mop->mo_flags & MO_IS_LOOP) dev = mop->mo_loopdev; vprint("formatting backing filesystem %s on %s\n", MT_STR(&mop->mo_ldd), dev); vprint("\ttarget name %s\n", mop->mo_ldd.ldd_svname); vprint("\t4k blocks "LPU64"\n", block_count); vprint("\toptions %s\n", mop->mo_mkfsopts); /* mkfs_cmd's trailing space is important! */ strscat(mkfs_cmd, mop->mo_mkfsopts, sizeof(mkfs_cmd)); strscat(mkfs_cmd, " ", sizeof(mkfs_cmd)); strscat(mkfs_cmd, dev, sizeof(mkfs_cmd)); if (block_count != 0) { sprintf(buf, " "LPU64, block_count); strscat(mkfs_cmd, buf, sizeof(mkfs_cmd)); } vprint("mkfs_cmd = %s\n", mkfs_cmd); ret = run_command(mkfs_cmd, sizeof(mkfs_cmd)); if (ret) { fatal(); fprintf(stderr, "Unable to build fs %s (%d)\n", dev, ret); } return ret; } /* ==================== Lustre config functions =============*/ void print_ldd(char *str, struct lustre_disk_data *ldd) { printf("\n %s:\n", str); printf("Target: %s\n", ldd->ldd_svname); if (ldd->ldd_svindex == INDEX_UNASSIGNED) printf("Index: unassigned\n"); else printf("Index: %d\n", ldd->ldd_svindex); if (ldd->ldd_uuid[0]) printf("UUID: %s\n", (char *)ldd->ldd_uuid); printf("Lustre FS: %s\n", ldd->ldd_fsname); printf("Mount type: %s\n", MT_STR(ldd)); printf("Flags: %#x\n", ldd->ldd_flags); printf(" (%s%s%s%s%s%s%s%s%s)\n", IS_MDT(ldd) ? "MDT ":"", IS_OST(ldd) ? "OST ":"", IS_MGS(ldd) ? "MGS ":"", ldd->ldd_flags & LDD_F_NEED_INDEX ? "needs_index ":"", ldd->ldd_flags & LDD_F_VIRGIN ? "first_time ":"", ldd->ldd_flags & LDD_F_UPDATE ? "update ":"", ldd->ldd_flags & LDD_F_WRITECONF ? "writeconf ":"", ldd->ldd_flags & LDD_F_IAM_DIR ? "IAM_dir_format ":"", ldd->ldd_flags & LDD_F_UPGRADE14 ? "upgrade1.4 ":""); printf("Persistent mount opts: %s\n", ldd->ldd_mount_opts); printf("Parameters:%s\n", ldd->ldd_params); if (ldd->ldd_userdata[0]) printf("Comment: %s\n", ldd->ldd_userdata); printf("\n"); } static int touch_file(char *filename) { int fd; if (filename == NULL) { return 1; } fd = open(filename, O_CREAT | O_TRUNC, 0600); if (fd < 0) { return 1; } else { close(fd); return 0; } } /* keep it less than LL_FID_NAMELEN */ #define DUMMY_FILE_NAME_LEN 25 #define EXT3_DIRENT_SIZE DUMMY_FILE_NAME_LEN /* Need to add these many entries to this directory to make HTREE dir. */ #define MIN_ENTRIES_REQ_FOR_HTREE ((L_BLOCK_SIZE / EXT3_DIRENT_SIZE)) static int add_dummy_files(char *dir) { char fpname[PATH_MAX]; int i; int rc; for (i = 0; i < MIN_ENTRIES_REQ_FOR_HTREE; i++) { snprintf(fpname, PATH_MAX, "%s/%0*d", dir, DUMMY_FILE_NAME_LEN, i); rc = touch_file(fpname); if (rc && rc != -EEXIST) { fprintf(stderr, "%s: Can't create dummy file %s: %s\n", progname, fpname , strerror(errno)); return rc; } } return 0; } static int __l_mkdir(char * filepnm, int mode , struct mkfs_opts *mop) { int ret; ret = mkdir(filepnm, mode); if (ret && ret != -EEXIST) return ret; /* IAM mode supports ext3 directories of HTREE type only. So add dummy * entries to new directory to create htree type of container for * this directory. */ if (mop->mo_ldd.ldd_flags & LDD_F_IAM_DIR) return add_dummy_files(filepnm); return 0; } /* Write the server config files */ int write_local_files(struct mkfs_opts *mop) { char mntpt[] = "/tmp/mntXXXXXX"; char filepnm[128]; char *dev; FILE *filep; int ret = 0; size_t num; /* Mount this device temporarily in order to write these files */ if (!mkdtemp(mntpt)) { fprintf(stderr, "%s: Can't create temp mount point %s: %s\n", progname, mntpt, strerror(errno)); return errno; } dev = mop->mo_device; if (mop->mo_flags & MO_IS_LOOP) dev = mop->mo_loopdev; ret = mount(dev, mntpt, MT_STR(&mop->mo_ldd), 0, mop->mo_ldd.ldd_mount_opts); if (ret) { fprintf(stderr, "%s: Unable to mount %s: %s\n", progname, dev, strerror(errno)); ret = errno; if (errno == ENODEV) { fprintf(stderr, "Is the %s module available?\n", MT_STR(&mop->mo_ldd)); } goto out_rmdir; } /* Set up initial directories */ sprintf(filepnm, "%s/%s", mntpt, MOUNT_CONFIGS_DIR); ret = __l_mkdir(filepnm, 0777, mop); if ((ret != 0) && (errno != EEXIST)) { fprintf(stderr, "%s: Can't make configs dir %s (%s)\n", progname, filepnm, strerror(errno)); goto out_umnt; } else if (errno == EEXIST) { ret = 0; } /* Save the persistent mount data into a file. Lustre must pre-read this file to get the real mount options. */ vprint("Writing %s\n", MOUNT_DATA_FILE); sprintf(filepnm, "%s/%s", mntpt, MOUNT_DATA_FILE); filep = fopen(filepnm, "w"); if (!filep) { fprintf(stderr, "%s: Unable to create %s file: %s\n", progname, filepnm, strerror(errno)); goto out_umnt; } num = fwrite(&mop->mo_ldd, sizeof(mop->mo_ldd), 1, filep); if (num < 1 && ferror(filep)) { fprintf(stderr, "%s: Unable to write to file (%s): %s\n", progname, filepnm, strerror(errno)); goto out_umnt; } fclose(filep); /* COMPAT_146 */ #ifdef TUNEFS /* Check for upgrade */ if ((mop->mo_ldd.ldd_flags & (LDD_F_UPGRADE14 | LDD_F_SV_TYPE_MGS)) == (LDD_F_UPGRADE14 | LDD_F_SV_TYPE_MGS)) { char cmd[128]; char *term; int cmdsz = sizeof(cmd); vprint("Copying old logs\n"); /* Copy the old client log to fsname-client */ sprintf(filepnm, "%s/%s/%s-client", mntpt, MOUNT_CONFIGS_DIR, mop->mo_ldd.ldd_fsname); snprintf(cmd, cmdsz, "cp %s/%s/client %s", mntpt, MDT_LOGS_DIR, filepnm); ret = run_command(cmd, cmdsz); if (ret) { fprintf(stderr, "%s: Can't copy 1.4 config %s/client " "(%d)\n", progname, MDT_LOGS_DIR, ret); fprintf(stderr, "mount -t ldiskfs %s somewhere, " "find the client log for fs %s and " "copy it manually into %s/%s-client, " "then umount.\n", mop->mo_device, mop->mo_ldd.ldd_fsname, MOUNT_CONFIGS_DIR, mop->mo_ldd.ldd_fsname); goto out_umnt; } /* We need to use the old mdt log because otherwise mdt won't have complete lov if old clients connect before all servers upgrade. */ /* Copy the old mdt log to fsname-MDT0000 (get old name from mdt_UUID) */ ret = 1; strscpy(filepnm, (char *)mop->mo_ldd.ldd_uuid, sizeof(filepnm)); term = strstr(filepnm, "_UUID"); if (term) { *term = '\0'; snprintf(cmd, cmdsz, "cp %s/%s/%s %s/%s/%s", mntpt, MDT_LOGS_DIR, filepnm, mntpt, MOUNT_CONFIGS_DIR, mop->mo_ldd.ldd_svname); ret = run_command(cmd, cmdsz); } if (ret) { fprintf(stderr, "%s: Can't copy 1.4 config %s/%s " "(%d)\n", progname, MDT_LOGS_DIR, filepnm, ret); fprintf(stderr, "mount -t ext3 %s somewhere, " "find the MDT log for fs %s and " "copy it manually into %s/%s, " "then umount.\n", mop->mo_device, mop->mo_ldd.ldd_fsname, MOUNT_CONFIGS_DIR, mop->mo_ldd.ldd_svname); goto out_umnt; } } #endif /* end COMPAT_146 */ out_umnt: umount(mntpt); out_rmdir: rmdir(mntpt); return ret; } int read_local_files(struct mkfs_opts *mop) { char tmpdir[] = "/tmp/dirXXXXXX"; char cmd[PATH_MAX]; char filepnm[128]; char *dev; FILE *filep; int ret = 0; int cmdsz = sizeof(cmd); /* Make a temporary directory to hold Lustre data files. */ if (!mkdtemp(tmpdir)) { fprintf(stderr, "%s: Can't create temporary directory %s: %s\n", progname, tmpdir, strerror(errno)); return errno; } dev = mop->mo_device; /* TODO: it's worth observing the get_mountdata() function that is in mount_utils.c for getting the mountdata out of the filesystem */ /* Construct debugfs command line. */ snprintf(cmd, cmdsz, "%s -c -R 'dump /%s %s/mountdata' '%s'", DEBUGFS, MOUNT_DATA_FILE, tmpdir, dev); ret = run_command(cmd, cmdsz); if (ret) verrprint("%s: Unable to dump %s dir (%d)\n", progname, MOUNT_CONFIGS_DIR, ret); sprintf(filepnm, "%s/mountdata", tmpdir); filep = fopen(filepnm, "r"); if (filep) { size_t num_read; vprint("Reading %s\n", MOUNT_DATA_FILE); num_read = fread(&mop->mo_ldd, sizeof(mop->mo_ldd), 1, filep); if (num_read < 1 && ferror(filep)) { fprintf(stderr, "%s: Unable to read from file (%s): %s\n", progname, filepnm, strerror(errno)); goto out_close; } } else { /* COMPAT_146 */ /* Try to read pre-1.6 config from last_rcvd */ struct lr_server_data lsd; verrprint("%s: Unable to read %d.%d config %s.\n", progname, LUSTRE_MAJOR, LUSTRE_MINOR, filepnm); verrprint("Trying 1.4 config from last_rcvd\n"); sprintf(filepnm, "%s/%s", tmpdir, LAST_RCVD); /* Construct debugfs command line. */ snprintf(cmd, cmdsz, "%s -c -R 'dump /%s %s' %s", DEBUGFS, LAST_RCVD, filepnm, dev); ret = run_command(cmd, cmdsz); if (ret) { fprintf(stderr, "%s: Unable to dump %s file (%d)\n", progname, LAST_RCVD, ret); goto out_rmdir; } filep = fopen(filepnm, "r"); if (!filep) { fprintf(stderr, "%s: Unable to open %s: %s\n", progname, filepnm, strerror(errno)); ret = errno; verrprint("Contents of %s:\n", tmpdir); verbose+=2; snprintf(cmd, cmdsz, "ls -l %s/", tmpdir); run_command(cmd, cmdsz); verrprint("Contents of disk:\n"); snprintf(cmd, cmdsz, "%s -c -R 'ls -l /' %s", DEBUGFS, dev); run_command(cmd, cmdsz); goto out_rmdir; } vprint("Reading %s\n", LAST_RCVD); ret = fread(&lsd, 1, sizeof(lsd), filep); if (ret < sizeof(lsd)) { fprintf(stderr, "%s: Short read (%d of %d)\n", progname, ret, (int)sizeof(lsd)); ret = ferror(filep); if (ret) goto out_close; } vprint("Feature compat=%x, incompat=%x\n", lsd.lsd_feature_compat, lsd.lsd_feature_incompat); if ((lsd.lsd_feature_compat & OBD_COMPAT_OST) || (lsd.lsd_feature_incompat & OBD_INCOMPAT_OST)) { mop->mo_ldd.ldd_flags = LDD_F_SV_TYPE_OST; mop->mo_ldd.ldd_svindex = lsd.lsd_ost_index; } else if ((lsd.lsd_feature_compat & OBD_COMPAT_MDT) || (lsd.lsd_feature_incompat & OBD_INCOMPAT_MDT)) { /* We must co-locate so mgs can see old logs. If user doesn't want this, they can copy the old logs manually and re-tunefs. */ mop->mo_ldd.ldd_flags = LDD_F_SV_TYPE_MDT | LDD_F_SV_TYPE_MGS; mop->mo_ldd.ldd_svindex = lsd.lsd_mdt_index; } else { /* If neither is set, we're pre-1.4.6, make a guess. */ /* Construct debugfs command line. */ snprintf(cmd, cmdsz, "%s -c -R 'rdump /%s %s' %s", DEBUGFS, MDT_LOGS_DIR, tmpdir, dev); run_command(cmd, cmdsz); sprintf(filepnm, "%s/%s", tmpdir, MDT_LOGS_DIR); if (lsd.lsd_ost_index > 0) { mop->mo_ldd.ldd_flags = LDD_F_SV_TYPE_OST; mop->mo_ldd.ldd_svindex = lsd.lsd_ost_index; } else { /* If there's a LOGS dir, it's an MDT */ if ((ret = access(filepnm, F_OK)) == 0) { mop->mo_ldd.ldd_flags = LDD_F_SV_TYPE_MDT | LDD_F_SV_TYPE_MGS; /* Old MDT's are always index 0 (pre CMD) */ mop->mo_ldd.ldd_svindex = 0; } else { /* The index may not be correct */ mop->mo_ldd.ldd_flags = LDD_F_SV_TYPE_OST | LDD_F_NEED_INDEX; verrprint("OST with unknown index\n"); } } } ret = 0; memcpy(mop->mo_ldd.ldd_uuid, lsd.lsd_uuid, sizeof(mop->mo_ldd.ldd_uuid)); mop->mo_ldd.ldd_flags |= LDD_F_UPGRADE14; } /* end COMPAT_146 */ out_close: fclose(filep); out_rmdir: snprintf(cmd, cmdsz, "rm -rf %s", tmpdir); run_command(cmd, cmdsz); if (ret) verrprint("Failed to read old data (%d)\n", ret); return ret; } void set_defaults(struct mkfs_opts *mop) { mop->mo_ldd.ldd_magic = LDD_MAGIC; mop->mo_ldd.ldd_config_ver = 1; mop->mo_ldd.ldd_flags = LDD_F_NEED_INDEX | LDD_F_UPDATE | LDD_F_VIRGIN; mop->mo_mgs_failnodes = 0; strcpy(mop->mo_ldd.ldd_fsname, "lustre"); if (get_os_version() == 24) mop->mo_ldd.ldd_mount_type = LDD_MT_EXT3; else mop->mo_ldd.ldd_mount_type = LDD_MT_LDISKFS; mop->mo_ldd.ldd_svindex = INDEX_UNASSIGNED; mop->mo_stripe_count = 1; } static inline void badopt(const char *opt, char *type) { fprintf(stderr, "%s: '--%s' only valid for %s\n", progname, opt, type); usage(stderr); } static int add_param(char *buf, char *key, char *val) { int end = sizeof(((struct lustre_disk_data *)0)->ldd_params); int start = strlen(buf); int keylen = 0; if (key) keylen = strlen(key); if (start + 1 + keylen + strlen(val) >= end) { fprintf(stderr, "%s: params are too long-\n%s %s%s\n", progname, buf, key ? key : "", val); return 1; } sprintf(buf + start, " %s%s", key ? key : "", val); return 0; } /* from mount_lustre */ /* Get rid of symbolic hostnames for tcp, since kernel can't do lookups */ #define MAXNIDSTR 1024 static char *convert_hostnames(char *s1) { char *converted, *s2 = 0, *c, *end, sep; int left = MAXNIDSTR; lnet_nid_t nid; converted = malloc(left); if (converted == NULL) { return NULL; } end = s1 + strlen(s1); c = converted; while ((left > 0) && (s1 < end)) { s2 = strpbrk(s1, ",:"); if (!s2) s2 = end; sep = *s2; *s2 = '\0'; nid = libcfs_str2nid(s1); if (nid == LNET_NID_ANY) { fprintf(stderr, "%s: Can't parse NID '%s'\n", progname, s1); free(converted); return NULL; } if (strncmp(libcfs_nid2str(nid), "127.0.0.1", strlen("127.0.0.1")) == 0) { fprintf(stderr, "%s: The NID '%s' resolves to the " "loopback address '%s'. Lustre requires a " "non-loopback address.\n", progname, s1, libcfs_nid2str(nid)); free(converted); return NULL; } c += snprintf(c, left, "%s%c", libcfs_nid2str(nid), sep); left = converted + MAXNIDSTR - c; s1 = s2 + 1; } return converted; } int parse_opts(int argc, char *const argv[], struct mkfs_opts *mop, char **mountopts) { static struct option long_opt[] = { {"iam-dir", 0, 0, 'a'}, {"backfstype", 1, 0, 'b'}, {"stripe-count-hint", 1, 0, 'c'}, {"comment", 1, 0, 'u'}, {"configdev", 1, 0, 'C'}, {"device-size", 1, 0, 'd'}, {"dryrun", 0, 0, 'n'}, {"erase-params", 0, 0, 'e'}, {"failnode", 1, 0, 'f'}, {"failover", 1, 0, 'f'}, {"mgs", 0, 0, 'G'}, {"help", 0, 0, 'h'}, {"index", 1, 0, 'i'}, {"mkfsoptions", 1, 0, 'k'}, {"mgsnode", 1, 0, 'm'}, {"mgsnid", 1, 0, 'm'}, {"mdt", 0, 0, 'M'}, {"fsname",1, 0, 'L'}, {"noformat", 0, 0, 'n'}, {"nomgs", 0, 0, 'N'}, {"mountfsoptions", 1, 0, 'o'}, {"ost", 0, 0, 'O'}, {"param", 1, 0, 'p'}, {"print", 0, 0, 'n'}, {"quiet", 0, 0, 'q'}, {"reformat", 0, 0, 'r'}, {"verbose", 0, 0, 'v'}, {"writeconf", 0, 0, 'w'}, {"upgrade_to_18", 0, 0, 'U'}, {0, 0, 0, 0} }; char *optstring = "b:c:C:d:ef:Ghi:k:L:m:MnNo:Op:Pqru:vw"; int opt; int rc, longidx; while ((opt = getopt_long(argc, argv, optstring, long_opt, &longidx)) != EOF) { switch (opt) { case 'a': { if (IS_MDT(&mop->mo_ldd)) mop->mo_ldd.ldd_flags |= LDD_F_IAM_DIR; break; } case 'b': { int i = 0; while (i < LDD_MT_LAST) { if (strcmp(optarg, mt_str(i)) == 0) { mop->mo_ldd.ldd_mount_type = i; break; } i++; } break; } case 'c': if (IS_MDT(&mop->mo_ldd)) { int stripe_count = atol(optarg); if (stripe_count <= 0) { fprintf(stderr, "%s: bad stripe count " "%d\n", progname, stripe_count); return 1; } mop->mo_stripe_count = stripe_count; } else { badopt(long_opt[longidx].name, "MDT"); return 1; } break; case 'C': /* Configdev */ //FIXME printf("Configdev not implemented\n"); return 1; case 'd': mop->mo_device_sz = atol(optarg); break; case 'e': mop->mo_ldd.ldd_params[0] = '\0'; /* Must update the mgs logs */ mop->mo_ldd.ldd_flags |= LDD_F_UPDATE; break; case 'f': { char *nids = convert_hostnames(optarg); if (!nids) return 1; rc = add_param(mop->mo_ldd.ldd_params, PARAM_FAILNODE, nids); free(nids); if (rc) return rc; /* Must update the mgs logs */ mop->mo_ldd.ldd_flags |= LDD_F_UPDATE; failover = 1; break; } case 'G': mop->mo_ldd.ldd_flags |= LDD_F_SV_TYPE_MGS; break; case 'h': usage(stdout); return 1; case 'i': if (!(mop->mo_ldd.ldd_flags & (LDD_F_UPGRADE14 | LDD_F_VIRGIN | LDD_F_WRITECONF))) { fprintf(stderr, "%s: cannot change the index of" " a registered target\n", progname); return 1; } if (IS_MDT(&mop->mo_ldd) || IS_OST(&mop->mo_ldd)) { mop->mo_ldd.ldd_svindex = atol(optarg); mop->mo_ldd.ldd_flags &= ~LDD_F_NEED_INDEX; } else { badopt(long_opt[longidx].name, "MDT,OST"); return 1; } break; case 'k': strscpy(mop->mo_mkfsopts, optarg, sizeof(mop->mo_mkfsopts)); break; case 'L': { char *tmp; if (!(mop->mo_flags & MO_FORCEFORMAT) && (!(mop->mo_ldd.ldd_flags & (LDD_F_UPGRADE14 | LDD_F_VIRGIN | LDD_F_WRITECONF)))) { fprintf(stderr, "%s: cannot change the name of" " a registered target\n", progname); return 1; } if ((strlen(optarg) < 1) || (strlen(optarg) > 8)) { fprintf(stderr, "%s: filesystem name must be " "1-8 chars\n", progname); return 1; } if ((tmp = strpbrk(optarg, "/:"))) { fprintf(stderr, "%s: char '%c' not allowed in " "filesystem name\n", progname, *tmp); return 1; } strscpy(mop->mo_ldd.ldd_fsname, optarg, sizeof(mop->mo_ldd.ldd_fsname)); break; } case 'm': { char *nids = convert_hostnames(optarg); if (!nids) return 1; rc = add_param(mop->mo_ldd.ldd_params, PARAM_MGSNODE, nids); free(nids); if (rc) return rc; mop->mo_mgs_failnodes++; break; } case 'M': mop->mo_ldd.ldd_flags |= LDD_F_SV_TYPE_MDT; break; case 'n': print_only++; break; case 'N': mop->mo_ldd.ldd_flags &= ~LDD_F_SV_TYPE_MGS; break; case 'o': *mountopts = optarg; break; case 'O': mop->mo_ldd.ldd_flags |= LDD_F_SV_TYPE_OST; break; case 'p': rc = add_param(mop->mo_ldd.ldd_params, NULL, optarg); if (rc) return rc; /* Must update the mgs logs */ mop->mo_ldd.ldd_flags |= LDD_F_UPDATE; break; case 'q': verbose--; break; case 'r': mop->mo_flags |= MO_FORCEFORMAT; break; case 'u': strscpy(mop->mo_ldd.ldd_userdata, optarg, sizeof(mop->mo_ldd.ldd_userdata)); break; case 'v': verbose++; break; case 'w': mop->mo_ldd.ldd_flags |= LDD_F_WRITECONF; break; case 'U': upgrade_to_18 = 1; break; default: if (opt != '?') { fatal(); fprintf(stderr, "Unknown option '%c'\n", opt); } return EINVAL; } }//while /* Last arg is device */ if (optind != argc - 1) { fatal(); fprintf(stderr, "Bad argument: %s\n", argv[optind]); return EINVAL; } /* single argument: */ if (argc == 2) ++print_only; return 0; } /* Search for opt in mntlist, returning true if found. */ static int in_mntlist(char *opt, char *mntlist) { char *ml, *mlp, *item, *ctx = NULL; if (!(ml = strdup(mntlist))) { fprintf(stderr, "%s: out of memory\n", progname); exit(1); } mlp = ml; while ((item = strtok_r(mlp, ",", &ctx))) { if (!strcmp(opt, item)) break; mlp = NULL; } free(ml); return (item != NULL); } /* Issue a message on stderr for every item in wanted_mountopts that is not * present in mountopts. The justwarn boolean toggles between error and * warning message. Return an error count. */ static int check_mountfsoptions(char *mountopts, char *wanted_mountopts, int justwarn) { char *ml, *mlp, *item, *ctx = NULL; int errors = 0; if (!(ml = strdup(wanted_mountopts))) { fprintf(stderr, "%s: out of memory\n", progname); exit(1); } mlp = ml; while ((item = strtok_r(mlp, ",", &ctx))) { if (!in_mntlist(item, mountopts)) { fprintf(stderr, "%s: %s mount option `%s' is missing\n", progname, justwarn ? "Warning: default" : "Error: mandatory", item); errors++; } mlp = NULL; } free(ml); return errors; } /* Trim embedded white space, leading and trailing commas from string s. */ static void trim_mountfsoptions(char *s) { char *p; for (p = s; *p; ) { if (isspace(*p)) { memmove(p, p + 1, strlen(p + 1) + 1); continue; } p++; } while (s[0] == ',') memmove(&s[0], &s[1], strlen(&s[1]) + 1); p = s + strlen(s) - 1; while (p >= s && *p == ',') *p-- = '\0'; } int main(int argc, char *const argv[]) { struct mkfs_opts mop; struct lustre_disk_data *ldd; char *mountopts = NULL; char always_mountopts[512] = ""; char default_mountopts[512] = ""; int ret = 0; if ((progname = strrchr(argv[0], '/')) != NULL) progname++; else progname = argv[0]; if ((argc < 2) || (argv[argc - 1][0] == '-')) { usage(stderr); return(EINVAL); } memset(&mop, 0, sizeof(mop)); set_defaults(&mop); /* device is last arg */ strscpy(mop.mo_device, argv[argc - 1], sizeof(mop.mo_device)); /* Are we using a loop device? */ ret = is_block(mop.mo_device); if (ret < 0) goto out; if (ret == 0) mop.mo_flags |= MO_IS_LOOP; #ifdef TUNEFS /* For tunefs, we must read in the old values before parsing any new ones. */ /* Check whether the disk has already been formatted by mkfs.lustre */ ret = is_lustre_target(&mop); if (ret == 0) { fatal(); fprintf(stderr, "Device %s has not been formatted with " "mkfs.lustre\n", mop.mo_device); ret = ENODEV; goto out; } ret = read_local_files(&mop); if (ret) { fatal(); fprintf(stderr, "Failed to read previous Lustre data from %s " "(%d)\n", mop.mo_device, ret); goto out; } if (strstr(mop.mo_ldd.ldd_params, PARAM_MGSNODE)) mop.mo_mgs_failnodes++; if (verbose > 0) print_ldd("Read previous values", &(mop.mo_ldd)); #endif ret = parse_opts(argc, argv, &mop, &mountopts); if (ret) goto out; ldd = &mop.mo_ldd; if (!(IS_MDT(ldd) || IS_OST(ldd) || IS_MGS(ldd))) { fatal(); fprintf(stderr, "must set target type: MDT,OST,MGS\n"); ret = EINVAL; goto out; } if (((IS_MDT(ldd) || IS_MGS(ldd))) && IS_OST(ldd)) { fatal(); fprintf(stderr, "OST type is exclusive with MDT,MGS\n"); ret = EINVAL; goto out; } if ((mop.mo_ldd.ldd_flags & (LDD_F_NEED_INDEX | LDD_F_UPGRADE14)) == (LDD_F_NEED_INDEX | LDD_F_UPGRADE14)) { fatal(); fprintf(stderr, "Can't find the target index, " "specify with --index\n"); ret = EINVAL; goto out; } #if 0 /* * Comment out these 2 checks temporarily, since for multi-MDSes * in single node only 1 mds node could have mgs service */ if (IS_MDT(ldd) && !IS_MGS(ldd) && (mop.mo_mgs_failnodes == 0)) { verrprint("No management node specified, adding MGS to this " "MDT\n"); ldd->ldd_flags |= LDD_F_SV_TYPE_MGS; } if (!IS_MGS(ldd) && (mop.mo_mgs_failnodes == 0)) { fatal(); if (IS_MDT(ldd)) fprintf(stderr, "Must specify --mgs or --mgsnode=\n"); else fprintf(stderr, "Must specify --mgsnode=\n"); ret = EINVAL; goto out; } #endif /* These are the permanent mount options (always included) */ switch (ldd->ldd_mount_type) { case LDD_MT_EXT3: case LDD_MT_LDISKFS: case LDD_MT_LDISKFS2: { strscat(default_mountopts, ",errors=remount-ro", sizeof(default_mountopts)); if (IS_MDT(ldd) || IS_MGS(ldd)) strscat(always_mountopts, ",iopen_nopriv,user_xattr", sizeof(always_mountopts)); if ((get_os_version() == 24) && IS_OST(ldd)) strscat(always_mountopts, ",asyncdel", sizeof(always_mountopts)); /* NB: Files created while extents are enabled cannot be read if mounted with a kernel that doesn't include the Lustre ldiskfs patches! */ if (IS_OST(ldd) && (ldd->ldd_mount_type == LDD_MT_LDISKFS || ldd->ldd_mount_type == LDD_MT_LDISKFS2)) { strscat(default_mountopts, ",extents,mballoc", sizeof(default_mountopts)); } break; } case LDD_MT_SMFS: { mop.mo_flags |= MO_IS_LOOP; sprintf(always_mountopts, ",type=ext3,dev=%s", mop.mo_device); break; } default: { fatal(); fprintf(stderr, "unknown fs type %d '%s'\n", ldd->ldd_mount_type, MT_STR(ldd)); ret = EINVAL; goto out; } } if (mountopts) { trim_mountfsoptions(mountopts); (void)check_mountfsoptions(mountopts, default_mountopts, 1); if (check_mountfsoptions(mountopts, always_mountopts, 0)) { ret = EINVAL; goto out; } sprintf(ldd->ldd_mount_opts, "%s", mountopts); } else { #ifdef TUNEFS if (ldd->ldd_mount_opts[0] == 0) /* use the defaults unless old opts exist */ #endif { sprintf(ldd->ldd_mount_opts, "%s%s", always_mountopts, default_mountopts); trim_mountfsoptions(ldd->ldd_mount_opts); } } server_make_name(ldd->ldd_flags, ldd->ldd_svindex, ldd->ldd_fsname, ldd->ldd_svname); if (verbose >= 0) print_ldd("Permanent disk data", ldd); if (print_only) { printf("exiting before disk write.\n"); goto out; } if (check_mtab_entry(mop.mo_device)) return(EEXIST); /* Create the loopback file */ if (mop.mo_flags & MO_IS_LOOP) { ret = access(mop.mo_device, F_OK); if (ret) ret = errno; #ifndef TUNEFS /* mkfs.lustre */ /* Reformat the loopback file */ if (ret || (mop.mo_flags & MO_FORCEFORMAT)) ret = loop_format(&mop); #endif if (ret == 0) ret = loop_setup(&mop); if (ret) { fatal(); fprintf(stderr, "Loop device setup for %s failed: %s\n", mop.mo_device, strerror(ret)); goto out; } } #ifndef TUNEFS /* mkfs.lustre */ /* Check whether the disk has already been formatted by mkfs.lustre */ if (!(mop.mo_flags & MO_FORCEFORMAT)) { ret = is_lustre_target(&mop); if (ret) { fatal(); fprintf(stderr, "Device %s was previously formatted " "for lustre. Use --reformat to reformat it, " "or tunefs.lustre to modify.\n", mop.mo_device); goto out; } } /* Format the backing filesystem */ ret = make_lustre_backfs(&mop); if (ret != 0) { fatal(); fprintf(stderr, "mkfs failed %d\n", ret); goto out; } #endif /* Write our config files */ ret = write_local_files(&mop); if (ret != 0) { fatal(); fprintf(stderr, "failed to write local files\n"); goto out; } out: loop_cleanup(&mop); /* Fix any crazy return values from system() */ if (ret && ((ret & 255) == 0)) return (1); if (ret) verrprint("%s: exiting with %d (%s)\n", progname, ret, strerror(ret)); return (ret); }