2 # vim:expandtab:shiftwidth=4:softtabstop=4:tabstop=4:
4 trap 'print_summary && touch $TF_FAIL && \
5 echo "test-framework exiting on error"' ERR
9 export REFORMAT=${REFORMAT:-""}
10 export WRITECONF=${WRITECONF:-""}
11 export VERBOSE=${VERBOSE:-false}
12 export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
15 export GSS_PIPEFS=false
16 export IDENTITY_UPCALL=default
19 # LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
20 # LOAD_LLOOP is true. LOAD_LLOOP is false by default.
21 export LOAD_LLOOP=${LOAD_LLOOP:-false}
23 #export PDSH="pdsh -S -Rssh -w"
25 # function used by scripts run on remote nodes
26 LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
27 . $LUSTRE/tests/functions.sh
28 . $LUSTRE/tests/yaml.sh
30 LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
32 EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
34 if [ -f "$EXCEPT_LIST_FILE" ]; then
35 echo "Reading test skip list from $EXCEPT_LIST_FILE"
40 # check config files for options in decreasing order of preference
41 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/lustre.conf ] &&
42 MODPROBECONF=/etc/modprobe.d/lustre.conf
43 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/Lustre ] &&
44 MODPROBECONF=/etc/modprobe.d/Lustre
45 [ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
46 MODPROBECONF=/etc/modprobe.conf
50 [[ $DIR/ = $MOUNT/* ]] || \
51 { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
52 [[ $DIR1/ = $MOUNT1/* ]] || \
53 { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
54 [[ $DIR2/ = $MOUNT2/* ]] || \
55 { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
57 [ -n "$failed" ] && exit 99 || true
61 echo "usage: $0 [-r] [-f cfgfile]"
69 [ "$TESTSUITE" == "lfsck" ] && return 0
70 [ -n "$ONLY" ] && echo "WARNING: ONLY is set to $(echo $ONLY)"
72 local form="%-13s %-17s %-9s %s %s\n"
73 printf "$form" "status" "script" "Total(sec)" "E(xcluded) S(low)"
74 echo "------------------------------------------------------------------------------------"
75 for O in $DEFAULT_SUITES; do
76 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
77 [ "${!O}" = "no" ] && continue || true
78 local o=$(echo $O | tr "[:upper:]_" "[:lower:]-")
79 local log=${TMP}/${o}.log
80 if is_sanity_benchmark $o; then
81 log=${TMP}/sanity-benchmark.log
86 local status=Unfinished
88 skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
89 slow=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | sort -nr -k 3 | head -5 | awk '{ print $2":"$3"s" }')
90 total=$(grep duration $log | awk '{ print $2}')
91 if [ "${!O}" = "done" ]; then
95 local durations=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | awk '{ print $2":"$3"|" }')
96 details=$(printf "%s\n%s %s %s\n" "$details" "DDETAILS" "$O" "$(echo $durations)")
99 printf "$form" $status "$O" "${total}" "E=$skipped"
100 printf "$form" "-" "-" "-" "S=$(echo $slow)"
103 for O in $DEFAULT_SUITES; do
104 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
105 if [ "${!O}" = "no" ]; then
106 printf "$form" "Skipped" "$O" ""
110 # print the detailed tests durations if DDETAILS=true
117 export LUSTRE=`absolute_path $LUSTRE`
118 export TESTSUITE=`basename $0 .sh`
119 export TEST_FAILED=false
120 export FAIL_ON_SKIP_ENV=${FAIL_ON_SKIP_ENV:-false}
122 export MKE2FS=${MKE2FS:-mke2fs}
123 export DEBUGFS=${DEBUGFS:-debugfs}
124 export TUNE2FS=${TUNE2FS:-tune2fs}
125 export E2LABEL=${E2LABEL:-e2label}
126 export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
127 export E2FSCK=${E2FSCK:-e2fsck}
128 export LFSCK_BIN=${LFSCK_BIN:-lfsck}
130 export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
131 export FSCK_MAX_ERR=4 # File system errors left uncorrected
133 #[ -d /r ] && export ROOT=${ROOT:-/r}
134 export TMP=${TMP:-$ROOT/tmp}
135 export TESTSUITELOG=${TMP}/${TESTSUITE}.log
136 export LOGDIR=${LOGDIR:-${TMP}/test_logs/$(date +%s)}
137 export TESTLOG_PREFIX=$LOGDIR/$TESTSUITE
139 export HOSTNAME=${HOSTNAME:-$(hostname -s)}
140 if ! echo $PATH | grep -q $LUSTRE/utils; then
141 export PATH=$LUSTRE/utils:$PATH
143 if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
144 export PATH=$LUSTRE/utils/gss:$PATH
146 if ! echo $PATH | grep -q $LUSTRE/tests; then
147 export PATH=$LUSTRE/tests:$PATH
149 if ! echo $PATH | grep -q $LUSTRE/../lustre-iokit/sgpdd-survey; then
150 export PATH=$LUSTRE/../lustre-iokit/sgpdd-survey:$PATH
152 export LST=${LST:-"$LUSTRE/../lnet/utils/lst"}
153 [ ! -f "$LST" ] && export LST=$(which lst)
154 export SGPDDSURVEY=${SGPDDSURVEY:-"$LUSTRE/../lustre-iokit/sgpdd-survey/sgpdd-survey")}
155 [ ! -f "$SGPDDSURVEY" ] && export SGPDDSURVEY=$(which sgpdd-survey)
156 # Ubuntu, at least, has a truncate command in /usr/bin
157 # so fully path our truncate command.
158 export TRUNCATE=${TRUNCATE:-$LUSTRE/tests/truncate}
159 export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
160 [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
161 if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
162 export PATH=$LUSTRE/tests/racer:$PATH:
164 if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
165 export PATH=$LUSTRE/tests/mpi:$PATH
167 export RSYNC_RSH=${RSYNC_RSH:-rsh}
169 export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
170 [ ! -f "$LCTL" ] && export LCTL=$(which lctl)
171 export LFS=${LFS:-"$LUSTRE/utils/lfs"}
172 [ ! -f "$LFS" ] && export LFS=$(which lfs)
173 SETSTRIPE=${SETSTRIPE:-"$LFS setstripe"}
174 GETSTRIPE=${GETSTRIPE:-"$LFS getstripe"}
176 export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
177 if [ ! -f "$L_GETIDENTITY" ]; then
178 if `which l_getidentity > /dev/null 2>&1`; then
179 export L_GETIDENTITY=$(which l_getidentity)
181 export L_GETIDENTITY=NONE
184 export LL_DECODE_FILTER_FID=${LL_DECODE_FILTER_FID:-"$LUSTRE/utils/ll_decode_filter_fid"}
185 [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID=$(which ll_decode_filter_fid)
186 export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
187 [ ! -f "$MKFS" ] && export MKFS=$(which mkfs.lustre)
188 export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
189 [ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
190 export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
191 export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
192 [ ! -f "$LUSTRE_RMMOD" ] &&
193 export LUSTRE_RMMOD=$(which lustre_rmmod 2> /dev/null)
194 export LFS_MIGRATE=${LFS_MIGRATE:-$LUSTRE/scripts/lfs_migrate}
195 [ ! -f "$LFS_MIGRATE" ] &&
196 export LFS_MIGRATE=$(which lfs_migrate 2> /dev/null)
197 export FSTYPE=${FSTYPE:-"ldiskfs"}
198 export NAME=${NAME:-local}
199 export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
200 [ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
201 export LGSSD=$(which lgssd)
202 export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
203 [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd 2> /dev/null)
204 export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
206 export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
209 if [ "$ACCEPTOR_PORT" ]; then
210 export PORT_OPT="--port $ACCEPTOR_PORT"
215 echo "Using GSS/krb5 ptlrpc security flavor"
216 which lgss_keyring > /dev/null 2>&1 || \
217 error_exit "built with gss disabled! SEC=$SEC"
228 IDENTITY_UPCALL=false
231 export LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
233 # Paths on remote nodes, if different
234 export RLUSTRE=${RLUSTRE:-$LUSTRE}
235 export RPWD=${RPWD:-$PWD}
236 export I_MOUNTED=${I_MOUNTED:-"no"}
237 if [ ! -f /lib/modules/$(uname -r)/kernel/fs/lustre/mds.ko -a \
238 ! -f /lib/modules/$(uname -r)/updates/kernel/fs/lustre/mds.ko -a \
239 ! -f `dirname $0`/../mds/mds.ko ]; then
240 export CLIENTMODSONLY=yes
243 export SHUTDOWN_ATTEMPTS=${SHUTDOWN_ATTEMPTS:-3}
247 while getopts "rvwf:" opt $*; do
250 r) REFORMAT=--reformat;;
252 w) WRITECONF=writeconf;;
257 shift $((OPTIND - 1))
260 # print the durations of each test if "true"
261 DDETAILS=${DDETAILS:-false}
262 [ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
267 # split arguments like "1.8.6-wc3" into "1", "8", "6", "wc3"
268 eval set -- $(tr "[:punct:]" " " <<< $*)
270 echo -n $((($1 << 16) | ($2 << 8) | $3))
273 export LINUX_VERSION=$(uname -r | sed -e "s/[-.]/ /3" -e "s/ .*//")
274 export LINUX_VERSION_CODE=$(version_code ${LINUX_VERSION//\./ })
277 2.4.*) EXT=".o"; USE_QUOTA=no; [ ! "$CLIENTONLY" ] && FSTYPE=ext3;;
278 *) EXT=".ko"; USE_QUOTA=yes;;
283 /sbin/lsmod | grep -q "^\<$1\>"
286 # Load a module on the system where this is running.
288 # Synopsis: load_module module_name [module arguments for insmod/modprobe]
290 # If module arguments are not given but MODOPTS_<MODULE> is set, then its value
291 # will be used as the arguments. Otherwise arguments will be obtained from
292 # /etc/modprobe.conf, from /etc/modprobe.d/Lustre, or else none will be used.
299 BASE=`basename $module $EXT`
301 module_loaded ${BASE} && return
303 # If no module arguments were passed, get them from $MODOPTS_<MODULE>, else from
305 if [ $# -eq 0 ]; then
306 # $MODOPTS_<MODULE>; we could use associative arrays, but that's not in
307 # Bash until 4.x, so we resort to eval.
308 optvar="MODOPTS_$(basename $module | tr a-z A-Z)"
309 eval set -- \$$optvar
310 if [ $# -eq 0 -a -n "$MODPROBECONF" ]; then
311 # Nothing in $MODOPTS_<MODULE>; try modprobe.conf
312 set -- $(grep -P "^options\\s+${BASE}" $MODPROBECONF)
313 # Get rid of "options $module"
314 (($# > 0)) && shift 2
316 # Ensure we have accept=all for lnet
317 if [ $(basename $module) = lnet ]; then
318 # OK, this is a bit wordy...
319 local arg accept_all_present=false
321 [ "$arg" = accept=all ] && accept_all_present=true
323 $accept_all_present || set -- "$@" accept=all
328 [ $# -gt 0 ] && echo "${module} options: '$*'"
330 # Note that insmod will ignore anything in modprobe.conf, which is why we're
331 # passing options on the command-line.
332 if [ "$BASE" == "lnet_selftest" ] && \
333 [ -f ${LUSTRE}/../lnet/selftest/${module}${EXT} ]; then
334 insmod ${LUSTRE}/../lnet/selftest/${module}${EXT}
335 elif [ -f ${LUSTRE}/${module}${EXT} ]; then
336 insmod ${LUSTRE}/${module}${EXT} "$@"
338 # must be testing a "make install" or "rpm" installation
339 # note failed to load ptlrpc_gss is considered not fatal
340 if [ "$BASE" == "ptlrpc_gss" ]; then
341 modprobe $BASE "$@" 2>/dev/null || echo "gss/krb5 is not supported"
348 llite_lloop_enabled() {
349 local n1=$(uname -r | cut -d. -f1)
350 local n2=$(uname -r | cut -d. -f2)
351 local n3=$(uname -r | cut -d- -f1 | cut -d. -f3)
353 # load the llite_lloop module for < 2.6.32 kernels
354 if [[ $n1 -lt 2 ]] || [[ $n1 -eq 2 && $n2 -lt 6 ]] || \
355 [[ $n1 -eq 2 && $n2 -eq 6 && $n3 -lt 32 ]] || \
362 load_modules_local() {
363 if [ -n "$MODPROBE" ]; then
365 echo "Using modprobe to load modules"
369 echo Loading modules from $LUSTRE
370 load_module ../libcfs/libcfs/libcfs
371 [ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
372 [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
373 load_module ../lnet/lnet/lnet
374 LNETLND=${LNETLND:-"socklnd/ksocklnd"}
375 load_module ../lnet/klnds/$LNETLND
376 load_module lvfs/lvfs
377 load_module obdclass/obdclass
378 load_module ptlrpc/ptlrpc
379 load_module ptlrpc/gss/ptlrpc_gss
380 [ "$USE_QUOTA" = "yes" -a "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
388 if ! client_only; then
389 SYMLIST=/proc/kallsyms
390 grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
391 grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
392 grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
393 if [ "$FSTYPE" = "ldiskfs" ]; then
394 grep -q exportfs_decode_fh $SYMLIST ||
395 { modprobe exportfs 2> /dev/null || true; }
396 load_module ../ldiskfs/ldiskfs/ldiskfs
402 load_module lvfs/fsfilt_$FSTYPE
404 load_module osd-ldiskfs/osd_ldiskfs
406 load_module obdfilter/obdfilter
410 load_module llite/lustre
411 llite_lloop_enabled && load_module llite/llite_lloop
412 [ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
414 rm -f $OGDB/ogdb-$HOSTNAME
415 $LCTL modules > $OGDB/ogdb-$HOSTNAME
417 # 'mount' doesn't look in $PATH, just sbin
418 if [ -f $LUSTRE/utils/mount.lustre ] && \
419 ! grep -qe "/sbin/mount\.lustre " /proc/mounts; then
420 [ ! -f /sbin/mount.lustre ] && touch /sbin/mount.lustre
421 mount --bind $LUSTRE/utils/mount.lustre /sbin/mount.lustre || true
428 # load modules on remote nodes optionally
429 # lustre-tests have to be installed on these nodes
430 if $LOAD_MODULES_REMOTE ; then
431 local list=$(comma_list $(remote_nodes_list))
432 echo loading modules on $list
433 do_rpc_nodes $list load_modules
438 LEAK_LUSTRE=$(dmesg | tail -n 30 | grep "obd_memory.*leaked" || true)
439 LEAK_PORTALS=$(dmesg | tail -n 20 | grep "Portals memory leaked" || true)
440 if [ "$LEAK_LUSTRE" -o "$LEAK_PORTALS" ]; then
441 echo "$LEAK_LUSTRE" 1>&2
442 echo "$LEAK_PORTALS" 1>&2
443 mv $TMP/debug $TMP/debug-leak.`date +%s` || true
444 echo "Memory leaks detected"
445 [ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
451 wait_exit_ST client # bug 12845
453 $LUSTRE_RMMOD $FSTYPE || return 2
455 if $LOAD_MODULES_REMOTE ; then
456 local list=$(comma_list $(remote_nodes_list))
457 if [ ! -z $list ]; then
458 echo unloading modules on $list
459 do_rpc_nodes $list $LUSTRE_RMMOD $FSTYPE
460 do_rpc_nodes $list check_mem_leak
464 if grep -qe "/sbin/mount\.lustre" /proc/mounts; then
465 umount /sbin/mount.lustre || true
466 [ -w /sbin/mount.lustre -a ! -s /sbin/mount.lustre ] && \
467 rm -f /sbin/mount.lustre || true
470 check_mem_leak || return 254
472 echo "modules unloaded."
476 check_gss_daemon_nodes() {
480 do_nodesv $list "num=\\\$(ps -o cmd -C $dname | grep $dname | wc -l);
481 if [ \\\"\\\$num\\\" -ne 1 ]; then
482 echo \\\$num instance of $dname;
487 check_gss_daemon_facet() {
491 num=`do_facet $facet ps -o cmd -C $dname | grep $dname | wc -l`
492 if [ $num -ne 1 ]; then
493 echo "$num instance of $dname on $facet"
502 echo Stopping $@ on $list
503 do_nodes $list "killall -2 $@ 2>/dev/null || true"
506 # start gss daemons on all nodes, or
507 # "daemon" on "list" if set
508 start_gss_daemons() {
512 if [ "$list" ] && [ "$daemon" ] ; then
513 echo "Starting gss daemon on nodes: $list"
514 do_nodes $list "$daemon" || return 8
518 local list=$(comma_list $(mdts_nodes))
520 echo "Starting gss daemon on mds: $list"
521 do_nodes $list "$LSVCGSSD -v" || return 1
523 do_nodes $list "$LGSSD -v" || return 2
526 list=$(comma_list $(osts_nodes))
527 echo "Starting gss daemon on ost: $list"
528 do_nodes $list "$LSVCGSSD -v" || return 3
529 # starting on clients
531 local clients=${CLIENTS:-`hostname`}
533 echo "Starting $LGSSD on clients $clients "
534 do_nodes $clients "$LGSSD -v" || return 4
537 # wait daemons entering "stable" status
541 # check daemons are running
543 list=$(comma_list $(mdts_nodes) $(osts_nodes))
544 check_gss_daemon_nodes $list lsvcgssd || return 5
546 list=$(comma_list $(mdts_nodes))
547 check_gss_daemon_nodes $list lgssd || return 6
550 check_gss_daemon_nodes $clients lgssd || return 7
555 local list=$(comma_list $(mdts_nodes))
557 send_sigint $list lsvcgssd lgssd
559 list=$(comma_list $(osts_nodes))
560 send_sigint $list lsvcgssd
562 list=${CLIENTS:-`hostname`}
563 send_sigint $list lgssd
568 if ! module_loaded ptlrpc_gss; then
569 load_module ptlrpc/gss/ptlrpc_gss
570 module_loaded ptlrpc_gss ||
571 error_exit "init_gss : GSS=$GSS, but gss/krb5 is not supported!"
573 start_gss_daemons || error_exit "start gss daemon failed! rc=$?"
575 if [ -n "$LGSS_KEYRING_DEBUG" ]; then
576 echo $LGSS_KEYRING_DEBUG > /proc/fs/lustre/sptlrpc/gss/lgss_keyring/debug_level
584 # maybe cleanup credential cache?
590 local device=`mdsdevname $num`
591 local label=`do_facet mds$num "e2label ${device}" | grep -v "CMD: "`
597 local device=`ostdevname $num`
598 local label=`do_facet ost$num "e2label ${device}" | grep -v "CMD: "`
603 local dz=${1:-$DEBUG_SIZE}
605 if [ -f /sys/devices/system/cpu/possible ]; then
606 local cpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/possible)+1))
608 local cpus=$(getconf _NPROCESSORS_CONF)
611 # bug 19944, adjust size to be -gt num_possible_cpus()
612 # promise 2MB for every cpu at least
613 if [ -n "$cpus" ] && [ $((cpus * 2)) -gt $dz ]; then
616 lctl set_param debug_mb=$dz
619 set_default_debug () {
620 local debug=${1:-"$PTLDEBUG"}
621 local subsys=${2:-"$SUBSYSTEM"}
622 local debug_size=${3:-$DEBUG_SIZE}
624 [ -n "$debug" ] && lctl set_param debug="$debug" >/dev/null
625 [ -n "$subsys" ] && lctl set_param subsystem_debug="${subsys# }" >/dev/null
627 [ -n "$debug_size" ] && set_debug_size $debug_size > /dev/null
630 set_default_debug_nodes () {
633 if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
634 nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
638 [[ -n $nodes ]] && do_rpc_nodes $nodes set_default_debug \
639 \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
642 set_default_debug_facet () {
644 local node=$(facet_active_host $facet)
645 [ -z "$node" ] && echo "No host defined for facet $facet" && exit 1
647 set_default_debug_nodes $node
652 local facets=${1:-$(get_facets)}
655 for facet in ${facets//,/ }; do
658 [ $RC -eq 0 ] && continue
660 if [ "$TESTSUITE.$TESTNAME" = "replay-dual.test_0a" ]; then
661 skip "Restart of $facet failed!." && touch $LU482_FAILED
663 error "Restart of $facet failed!"
672 local dev=$(facet_active $facet)_dev
673 local opt=${facet}_opt
674 local mntpt=$(facet_mntpt $facet)
676 echo "Starting ${facet}: ${!opt} $@ ${!dev} $mntpt"
677 do_facet ${facet} "mkdir -p $mntpt; mount -t lustre ${!opt} $@ ${!dev} $mntpt"
679 # to allow testing LU-482 error handling in mount_facets() and test_0a()
680 [ -f $TMP/test-lu482-trigger ] && RC=2
681 if [ $RC -ne 0 ]; then
682 echo "mount -t lustre $@ ${!dev} $mntpt"
683 echo "Start of ${!dev} on ${facet} failed ${RC}"
685 set_default_debug_facet $facet
687 label=$(do_facet ${facet} "$E2LABEL ${!dev}")
688 [ -z "$label" ] && echo no label for ${!dev} && exit 1
689 eval export ${facet}_svc=${label}
690 echo Started ${label}
695 # start facet device options
701 eval export ${facet}_dev=${device}
702 eval export ${facet}_opt=\"$@\"
704 local varname=${facet}failover_dev
705 if [ -n "${!varname}" ] ; then
706 eval export ${facet}failover_dev=${!varname}
708 eval export ${facet}failover_dev=$device
711 local mntpt=$(facet_mntpt $facet)
712 do_facet ${facet} mkdir -p $mntpt
713 eval export ${facet}_MOUNT=$mntpt
723 local HOST=`facet_active_host $facet`
724 [ -z $HOST ] && echo stop: no host for $facet && return 0
726 local mntpt=$(facet_mntpt $facet)
727 running=$(do_facet ${facet} "grep -c $mntpt' ' /proc/mounts") || true
728 if [ ${running} -ne 0 ]; then
729 echo "Stopping $mntpt (opts:$@) on $HOST"
730 do_facet ${facet} umount -d $@ $mntpt
733 # umount should block, but we should wait for unrelated obd's
734 # like the MGS or MGC to also stop.
735 wait_exit_ST ${facet}
738 # save quota version (both administrative and operational quotas)
739 # add an additional parameter if mountpoint is ever different from $MOUNT
740 quota_save_version() {
741 local fsname=${2:-$FSNAME}
743 local ver=$(tr -c -d "123" <<< $spec)
744 local type=$(tr -c -d "ug" <<< $spec)
746 [ -n "$ver" -a "$ver" != "3" ] && error "wrong quota version specifier"
748 [ -n "$type" ] && { $LFS quotacheck -$type $MOUNT || error "quotacheck has failed"; }
750 do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$spec"
752 local osts=$(get_facets OST)
753 for ost in ${osts//,/ }; do
755 do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$spec"
759 # client could mount several lustre
761 local fsname=${1:-$FSNAME}
763 do_facet mgs lctl get_param mdd.${fsname}-MDT*.quota_type || rc=$?
764 do_nodes $(comma_list $(osts_nodes)) \
765 lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
769 restore_quota_type () {
770 local mntpt=${1:-$MOUNT}
771 local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
772 if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
775 quota_save_version $old_QUOTA_TYPE
781 # We need save the original quota_type params, and restore them after testing
783 # Suppose that quota type the same on mds and ost
784 local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
785 [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
786 echo "[HOST:$HOSTNAME] [old_quota_type:$quota_type] [new_quota_type:$QUOTA_TYPE]"
787 if [ "$quota_type" != "$QUOTA_TYPE" ]; then
788 export old_QUOTA_TYPE=$quota_type
789 quota_save_version $QUOTA_TYPE
791 qtype=$(tr -c -d "ug" <<< $QUOTA_TYPE)
792 $LFS quotacheck -$qtype $mntpt || error "quotacheck has failed for $type"
795 local quota_usrs=$QUOTA_USERS
797 # get_filesystem_size
798 local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
799 local blk_soft=$((disksz + 1024))
800 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
802 local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
804 local i_hard=$((i_soft + i_soft / 20))
806 echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
807 $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
810 for usr in $quota_usrs; do
811 echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
813 cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
815 eval $cmd || error "$cmd FAILED!"
817 # display the quota status
818 echo "Quota settings for $usr : "
819 $LFS quota -v -u $usr $mntpt || true
826 local OPTIONS=${3:-$MOUNTOPT}
828 local device=$MGSNID:/$FSNAME
829 if [ -z "$mnt" -o -z "$FSNAME" ]; then
830 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
834 echo "Starting client: $client: $OPTIONS $device $mnt"
835 do_node $client mkdir -p $mnt
836 do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
838 set_default_debug_nodes $client
851 local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
852 if [ $running -ne 0 ]; then
853 echo "Stopping client $client $mnt (opts:$force)"
854 do_node $client lsof -t $mnt || need_kill=no
855 if [ "x$force" != "x" -a "x$need_kill" != "xno" ]; then
856 pids=$(do_node $client lsof -t $mnt | sort -u);
857 if [ -n $pids ]; then
858 do_node $client kill -9 $pids || true
862 busy=$(do_node $client "umount $force $mnt 2>&1" | grep -c "busy") || true
863 if [ $busy -ne 0 ] ; then
864 echo "$mnt is still busy, wait one second" && sleep 1
865 do_node $client umount $force $mnt
870 # nodes is comma list
871 sanity_mount_check_nodes () {
877 # FIXME: assume that all cluster nodes run the same os
878 [ "$(uname)" = Linux ] || return 0
881 for mnt in $mnts ; do
882 do_nodes $nodes "running=\\\$(grep -c $mnt' ' /proc/mounts);
883 mpts=\\\$(mount | grep -c $mnt' ');
884 if [ \\\$running -ne \\\$mpts ]; then
885 echo \\\$(hostname) env are INSANE!;
893 sanity_mount_check_servers () {
895 { echo "CLIENTONLY mode, skip mount_check_servers"; return 0; } || true
896 echo Checking servers environments
898 # FIXME: modify get_facets to display all facets wo params
899 local facets="$(get_facets OST),$(get_facets MDS),mgs"
903 for facet in ${facets//,/ }; do
904 node=$(facet_host ${facet})
905 mntpt=$(facet_mntpt $facet)
906 sanity_mount_check_nodes $node $mntpt ||
907 { error "server $node environments are insane!"; return 1; }
911 sanity_mount_check_clients () {
912 local clients=${1:-$CLIENTS}
913 local mntpt=${2:-$MOUNT}
914 local mntpt2=${3:-$MOUNT2}
916 [ -z $clients ] && clients=$(hostname)
917 echo Checking clients $clients environments
919 sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
920 error "clients environments are insane!"
923 sanity_mount_check () {
924 sanity_mount_check_servers || return 1
925 sanity_mount_check_clients || return 2
928 # mount clients if not mouted
929 zconf_mount_clients() {
932 local OPTIONS=${3:-$MOUNTOPT}
934 local device=$MGSNID:/$FSNAME
935 if [ -z "$mnt" -o -z "$FSNAME" ]; then
936 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
940 echo "Starting client $clients: $OPTIONS $device $mnt"
943 running=\\\$(mount | grep -c $mnt' ');
945 if [ \\\$running -eq 0 ] ; then
947 mount -t lustre $OPTIONS $device $mnt;
950 exit \\\$rc" || return ${PIPESTATUS[0]}
952 echo "Started clients $clients: "
953 do_nodes $clients "mount | grep $mnt' '"
955 set_default_debug_nodes $clients
960 zconf_umount_clients() {
967 echo "Stopping clients: $clients $mnt (opts:$force)"
968 do_nodes $clients "running=\\\$(grep -c $mnt' ' /proc/mounts);
969 if [ \\\$running -ne 0 ] ; then
970 echo Stopping client \\\$(hostname) $mnt opts:$force;
971 lsof $mnt || need_kill=no;
972 if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
973 pids=\\\$(lsof -t $mnt | sort -u);
974 if [ -n \\\"\\\$pids\\\" ]; then
978 while umount $force $mnt 2>&1 | grep -q "busy"; do
979 echo "$mnt is still busy, wait one second" && sleep 1;
986 echo + $POWER_DOWN $node
990 shutdown_node_hard () {
992 local attempts=$SHUTDOWN_ATTEMPTS
994 for i in $(seq $attempts) ; do
997 wait_for_function --quiet "! ping -w 3 -c 1 $host" 5 1 && return 0
998 echo "waiting for $host to fail attempts=$attempts"
999 [ $i -lt $attempts ] || \
1000 { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
1006 local mnt=${2:-$MOUNT}
1009 if [ "$FAILURE_MODE" = HARD ]; then
1010 shutdown_node_hard $client
1012 zconf_umount_clients $client $mnt -f
1018 local facets="$(get_facets OST),$(get_facets MDS)"
1021 combined_mgs_mds || facets="$facets,mgs"
1023 for facet in ${facets//,/ }; do
1024 if [ $(facet_active_host $facet) == $host ]; then
1025 affected="$affected $facet"
1029 echo $(comma_list $affected)
1034 local host=${2:-$(facet_host $facet)}
1036 local label=$(convert_facet2label $facet)
1037 do_node $host lctl dl | awk '{print $4}' | grep -q $label
1040 facets_up_on_host () {
1042 local facets=$(facets_on_host $host)
1045 for facet in ${facets//,/ }; do
1046 if $(facet_up $facet $host); then
1047 affected_up="$affected_up $facet"
1051 echo $(comma_list $affected_up)
1057 if [ "$FAILURE_MODE" = HARD ]; then
1058 shutdown_node_hard $(facet_active_host $facet)
1066 echo + $POWER_UP $node
1079 if [ "$FAILURE_MODE" = HARD ]; then
1080 reboot_node $(facet_active_host $facet)
1088 if [ "$FAILURE_MODE" = HARD ]; then
1098 for facet in ${facets//,/ }; do
1099 hosts=$(expand_list $hosts $(facet_host $facet) )
1105 _check_progs_installed () {
1109 for prog in $progs; do
1110 if ! [ "$(which $prog)" -o "${!prog}" ]; then
1111 echo $prog missing on $(hostname)
1118 check_progs_installed () {
1122 do_rpc_nodes $nodes _check_progs_installed $@
1125 # recovery-scale functions
1127 echo __$(echo $1 | tr '-' '_' | tr '.' '_')
1130 start_client_load() {
1133 local var=$(node_var_name $client)_load
1134 eval export ${var}=$load
1136 do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
1137 BREAK_ON_ERROR=$BREAK_ON_ERROR \
1138 END_RUN_FILE=$END_RUN_FILE \
1139 LOAD_PID_FILE=$LOAD_PID_FILE \
1140 TESTLOG_PREFIX=$TESTLOG_PREFIX \
1141 TESTNAME=$TESTNAME \
1142 DBENCH_LIB=$DBENCH_LIB \
1143 DBENCH_SRC=$DBENCH_SRC \
1146 log "Started client load: ${load} on $client"
1148 # get the children process IDs
1149 local pids=$(ps --ppid $ppid -o pid= | xargs)
1150 CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $ppid $pids"
1154 start_client_loads () {
1155 local -a clients=(${1//,/ })
1156 local numloads=${#CLIENT_LOADS[@]}
1159 for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
1160 testnum=$((nodenum % numloads))
1161 start_client_load ${clients[nodenum]} ${CLIENT_LOADS[testnum]}
1163 # bug 22169: wait the background threads to start
1167 # only for remote client
1168 check_client_load () {
1170 local var=$(node_var_name $client)_load
1171 local TESTLOAD=run_${!var}.sh
1173 ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
1175 # bug 18914: try to connect several times not only when
1176 # check ps, but while check_catastrophe also
1179 while [ $RC = 254 -a $tries -gt 0 ]; do
1183 if ! check_catastrophe $client; then
1185 if [ $RC -eq 254 ]; then
1186 # FIXME: not sure how long we shuold sleep here
1190 echo "check catastrophe failed: RC=$RC "
1194 # We can continue try to connect if RC=254
1195 # Just print the warning about this
1196 if [ $RC = 254 ]; then
1197 echo "got a return status of $RC from do_node while checking catastrophe on $client"
1200 # see if the load is still on the client
1203 while [ $RC = 254 -a $tries -gt 0 ]; do
1207 if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
1212 if [ $RC = 254 ]; then
1213 echo "got a return status of $RC from do_node while checking (catastrophe and 'ps') the client load on $client"
1214 # see if we can diagnose a bit why this is
1219 check_client_loads () {
1220 local clients=${1//,/ }
1224 for client in $clients; do
1225 check_client_load $client
1227 if [ "$rc" != 0 ]; then
1228 log "Client load failed on node $client, rc=$rc"
1234 restart_client_loads () {
1235 local clients=${1//,/ }
1236 local expectedfail=${2:-""}
1240 for client in $clients; do
1241 check_client_load $client
1243 if [ "$rc" != 0 -a "$expectedfail" ]; then
1244 local var=$(node_var_name $client)_load
1245 start_client_load $client ${!var}
1246 echo "Restarted client load ${!var}: on $client. Checking ..."
1247 check_client_load $client
1249 if [ "$rc" != 0 ]; then
1250 log "Client load failed to restart on node $client, rc=$rc"
1251 # failure one client load means test fail
1252 # we do not need to check other
1261 # Start vmstat and save its process ID in a file.
1266 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1269 "vmstat 1 > $TESTLOG_PREFIX.$TESTNAME.vmstat.\\\$(hostname -s).log \
1270 2>/dev/null </dev/null & echo \\\$! > $pid_file"
1273 # Display the nodes on which client loads failed.
1274 print_end_run_file() {
1278 [ -s $file ] || return 0
1280 echo "Found the END_RUN_FILE file: $file"
1283 # A client load will stop if it finds the END_RUN_FILE file.
1284 # That does not mean the client load actually failed though.
1285 # The first node in END_RUN_FILE is the one we are interested in.
1288 if [ -n "$node" ]; then
1289 local var=$(node_var_name $node)_load
1291 local prefix=$TESTLOG_PREFIX
1292 [ -n "$TESTNAME" ] && prefix=$prefix.$TESTNAME
1293 local stdout_log=$prefix.run_${!var}_stdout.$node.log
1294 local debug_log=$(echo $stdout_log | sed 's/\(.*\)stdout/\1debug/')
1296 echo "Client load ${!var} failed on node $node:"
1302 # Stop the process which had its PID saved in a file.
1307 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1309 do_nodes $nodes "test -f $pid_file &&
1310 { kill -s TERM \\\$(cat $pid_file); rm -f $pid_file; }" || true
1313 # Stop all client loads.
1314 stop_client_loads() {
1315 local nodes=${1:-$CLIENTS}
1318 # stop the client loads
1319 stop_process $nodes $pid_file
1321 # clean up the processes that started them
1322 [ -n "$CLIENT_LOAD_PIDS" ] && kill -9 $CLIENT_LOAD_PIDS 2>/dev/null || true
1324 # End recovery-scale functions
1326 # verify that lustre actually cleaned up properly
1328 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
1329 error "LBUG/LASSERT detected"
1330 BUSY=`dmesg | grep -i destruct || true`
1331 if [ "$BUSY" ]; then
1333 [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.`date +%s`
1337 check_mem_leak || exit 204
1339 [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl && \
1340 echo "$0: lustre didn't clean up..." 1>&2 && return 202 || true
1342 if module_loaded lnet || module_loaded libcfs; then
1343 echo "$0: modules still loaded..." 1>&2
1361 RESULT=$(do_node $node "$TEST")
1362 if [ "$RESULT" == "$FINAL" ]; then
1363 [ -z "$RESULT" -o $WAIT -le $sleep ] ||
1364 echo "Updated after ${WAIT}s: wanted '$FINAL' got '$RESULT'"
1367 [ $WAIT -ge $MAX ] && break
1368 [ $((WAIT % print)) -eq 0 ] &&
1369 echo "Waiting $((MAX - WAIT)) secs for update"
1370 WAIT=$((WAIT + sleep))
1373 echo "Update not seen after ${MAX}s: wanted '$FINAL' got '$RESULT'"
1377 wait_update_facet () {
1379 wait_update $(facet_active_host $facet) "$@"
1382 wait_delete_completed () {
1383 local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
1384 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
1388 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
1390 TOTAL=`lctl get_param -n osc.*.kbytesavail | \
1391 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
1392 [ "$TOTAL" -eq "$TOTALPREV" ] && return 0
1393 echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
1397 echo "Delete is not completed in $MAX_WAIT sec"
1404 # we can use "for" here because we are waiting the slowest
1405 for host in ${hostlist//,/ }; do
1406 check_network "$host" 900
1408 while ! do_nodes $hostlist hostname > /dev/null; do sleep 5; done
1415 for facet in ${facetlist//,/ }; do
1416 hostlist=$(expand_list $hostlist $(facet_active_host $facet))
1418 wait_for_host $hostlist
1421 _wait_recovery_complete () {
1424 # Use default policy if $2 is not passed by caller.
1425 local MAX=${2:-$(max_recovery_time)}
1430 while [ $WAIT -lt $MAX ]; do
1431 STATUS=$(lctl get_param -n $param | grep status)
1433 [[ $STATUS = "status: COMPLETE" || $STATUS = "status: INACTIVE" ]] && return 0
1436 echo "Waiting $((MAX - WAIT)) secs for $param recovery done. $STATUS"
1438 echo "$param recovery not done in $MAX sec. $STATUS"
1442 wait_recovery_complete () {
1445 # with an assumption that at_max is the same on all nodes
1446 local MAX=${2:-$(max_recovery_time)}
1449 if [ "$FAILURE_MODE" = HARD ]; then
1450 facets=$(facets_on_host $(facet_active_host $facet))
1452 echo affected facets: $facets
1454 # we can use "for" here because we are waiting the slowest
1455 for facet in ${facets//,/ }; do
1456 local var_svc=${facet}_svc
1457 local param="*.${!var_svc}.recovery_status"
1459 local host=$(facet_active_host $facet)
1460 do_rpc_nodes $host _wait_recovery_complete $param $MAX
1464 wait_mds_ost_sync () {
1465 # just because recovery is done doesn't mean we've finished
1466 # orphan cleanup. Wait for llogs to get synchronized.
1467 echo "Waiting for orphan cleanup..."
1468 # MAX value includes time needed for MDS-OST reconnection
1469 local MAX=$(( TIMEOUT * 2 ))
1471 while [ $WAIT -lt $MAX ]; do
1472 local -a sync=($(do_nodes $(comma_list $(osts_nodes)) \
1473 "$LCTL get_param -n obdfilter.*.mds_sync"))
1476 for ((i=0; i<${#sync[@]}; i++)); do
1477 [ ${sync[$i]} -eq 0 ] && continue
1478 # there is a not finished MDS-OST synchronization
1482 sleep 2 # increase waiting time and cover statfs cache
1483 [ ${con} -eq 1 ] && return 0
1484 echo "Waiting $WAIT secs for $facet mds-ost sync done."
1487 echo "$facet recovery not done in $MAX sec. $STATUS"
1491 wait_destroy_complete () {
1492 echo "Waiting for destroy to be done..."
1493 # MAX value shouldn't be big as this mean server responsiveness
1494 # never increase this just to make test pass but investigate
1495 # why it takes so long time
1498 while [ $WAIT -lt $MAX ]; do
1499 local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
1501 for ((i=0; i<${#RPCs[@]}; i++)); do
1502 [ ${RPCs[$i]} -eq 0 ] && continue
1503 # there are still some destroy RPCs in flight
1508 [ ${con} -eq 1 ] && return 0 # done waiting
1509 echo "Waiting $WAIT secs for destroys to be done."
1512 echo "Destroys weren't done in $MAX sec."
1522 # conf-sanity 31 takes a long time cleanup
1523 while [ $WAIT -lt 300 ]; do
1524 running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
1525 [ -z "${running}" ] && return 0
1526 echo "waited $WAIT for${running}"
1527 [ $INTERVAL -lt 64 ] && INTERVAL=$((INTERVAL + INTERVAL))
1529 WAIT=$((WAIT + INTERVAL))
1531 echo "service didn't stop after $WAIT seconds. Still running:"
1536 wait_remote_prog () {
1542 [ "$PDSH" = "no_dsh" ] && return 0
1544 while [ $WAIT -lt $2 ]; do
1545 running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
1546 [ -z "${running}" ] && return 0 || true
1547 echo "waited $WAIT for: "
1549 [ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
1551 WAIT=$((WAIT + INTERVAL))
1553 local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
1554 [ -z "$pids" ] && return 0
1555 echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
1556 # FIXME: not portable
1557 for pid in $pids; do
1558 cat /proc/${pid}/status || true
1559 cat /proc/${pid}/wchan || true
1561 kill -9 $pid || true
1570 # not every config has many clients
1572 if [ ! -z "$CLIENTS" ]; then
1573 $PDSH $CLIENTS "stat -f $MOUNT" > /dev/null
1575 stat -f $MOUNT > /dev/null
1581 # usually checked on particular client or locally
1583 if [ ! -z "$client" ]; then
1584 $PDSH $client "stat -f $MOUNT" > /dev/null
1586 stat -f $MOUNT > /dev/null
1594 client_reconnect() {
1595 uname -n >> $MOUNT/recon
1596 if [ -z "$CLIENTS" ]; then
1597 df $MOUNT; uname -n >> $MOUNT/recon
1599 do_nodes $CLIENTS "df $MOUNT; uname -n >> $MOUNT/recon" > /dev/null
1601 echo Connected clients:
1603 ls -l $MOUNT/recon > /dev/null
1607 affected_facets () {
1610 local host=$(facet_active_host $facet)
1611 local affected=$facet
1613 if [ "$FAILURE_MODE" = HARD ]; then
1614 affected=$(facets_up_on_host $host)
1622 local host=$(facet_active_host $facet)
1624 echo "Failing $facet on node $host"
1626 # Make sure the client data is synced to disk. LU-924
1628 # We don't write client data synchrnously (to avoid flooding sync writes
1629 # when there are many clients connecting), so if the server reboots before
1630 # the client data reachs disk, the client data will be lost and the client
1631 # will be evicted after recovery, which is not what we expected.
1632 do_facet $facet "sync; sync; sync"
1634 local affected=$(affected_facets $facet)
1636 shutdown_facet $facet
1638 echo affected facets: $affected
1640 [ -n "$sleep_time" ] && sleep $sleep_time
1644 change_active $affected
1646 wait_for_facet $affected
1647 # start mgs first if it is affected
1648 if ! combined_mgs_mds && list_member $affected mgs; then
1649 mount_facet mgs || error "Restart of mgs failed"
1651 # FIXME; has to be changed to mount all facets concurrently
1652 affected=$(exclude_items_from_list $affected mgs)
1653 mount_facets $affected
1662 do_facet $facet "sync; sync; sync"
1665 # make sure there will be no seq change
1666 local clients=${CLIENTS:-$HOSTNAME}
1667 do_nodes $clients "f=${MOUNT}/fsa-\\\$(hostname); mcreate \\\$f; rm \\\$f"
1669 local svc=${facet}_svc
1670 do_facet $facet $LCTL --device %${!svc} notransno
1671 do_facet $facet $LCTL --device %${!svc} readonly
1672 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1673 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1676 replay_barrier_nodf() {
1677 local facet=$1 echo running=${running}
1678 do_facet $facet "sync; sync; sync"
1679 local svc=${facet}_svc
1680 echo Replay barrier on ${!svc}
1681 do_facet $facet $LCTL --device %${!svc} notransno
1682 do_facet $facet $LCTL --device %${!svc} readonly
1683 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1684 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1687 replay_barrier_nosync() {
1688 local facet=$1 echo running=${running}
1689 local svc=${facet}_svc
1690 echo Replay barrier on ${!svc}
1691 do_facet $facet $LCTL --device %${!svc} notransno
1692 do_facet $facet $LCTL --device %${!svc} readonly
1693 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
1694 $LCTL mark "local REPLAY BARRIER on ${!svc}"
1697 mds_evict_client() {
1698 UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
1699 do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
1702 ost_evict_client() {
1703 UUID=`lctl get_param -n devices| grep ${ost1_svc}-osc- | egrep -v 'MDT' | awk '{print $5}'`
1704 do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.evict_client $UUID"
1708 facet_failover $* || error "failover: $?"
1709 clients_up || error "post-failover df: $?"
1714 facet_failover $facet
1720 change_active $facet
1721 wait_for_facet $facet
1722 mount_facet $facet -o abort_recovery
1723 clients_up || echo "first df failed: $?"
1724 clients_up || error "post-failover df: $?"
1728 echo There is no lmc. This is mountconf, baby.
1732 host_nids_address() {
1736 if [ -n "$kind" ]; then
1737 nids=$(do_nodes $nodes "$LCTL list_nids | grep $kind | cut -f 1 -d '@'")
1739 nids=$(do_nodes $nodes "$LCTL list_nids all | cut -f 1 -d '@'")
1745 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1751 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1752 ID=`xtprocadmin -n $1 2>/dev/null | egrep -v 'NID' | awk '{print $1}'`
1753 if [ -z "$ID" ]; then
1754 echo "Could not get a ptl id for $1..."
1763 h2name_or_ip "$1" "tcp"
1768 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
1769 if type __h2elan >/dev/null 2>&1; then
1772 ID=`echo $1 | sed 's/[^0-9]*//g'`
1780 h2name_or_ip "$1" "o2ib"
1784 # This enables variables in cfg/"setup".sh files to support the pdsh HOSTLIST
1785 # expressions format. As a bonus we can then just pass in those variables
1786 # to pdsh. What this function does is take a HOSTLIST type string and
1787 # expand it into a space deliminated list for us.
1795 [ -z "$hostlist" ] && return
1797 # Translate the case of [..],..,[..] to [..] .. [..]
1798 list="${hostlist/],/] }"
1800 [[ "$front" == *,* ]] && {
1803 list=${list/${old}/${new}}
1806 for item in $list; do
1807 # Test if we have any []'s at all
1808 if [ "$item" != "${item/\[/}" ]; then {
1809 # Expand the [*] into list
1813 if [ "$name" != "$item" ]; then
1814 group=${item#$name[*}
1817 for range in ${group//,/ }; do
1821 # Number of leading zeros
1824 end=$(echo $end | sed 's/0*//')
1825 [[ -z "$end" ]] && end=0
1826 [[ $padlen2 -gt $padlen ]] && {
1827 [[ $padlen2 -eq ${#end} ]] && padlen2=0
1830 begin=$(echo $begin | sed 's/0*//')
1831 [ -z $begin ] && begin=0
1833 for num in $(seq -f "%0${padlen}g" $begin $end); do
1834 value="${name#*,}${num}${back}"
1835 [ "$value" != "${value/\[/}" ] && {
1836 value=$(hostlist_expand "$value")
1838 myList="$myList $value"
1843 myList="$myList $item"
1846 myList=${myList//,/ }
1847 myList=${myList:1} # Remove first character which is a space
1849 # Filter any duplicates without sorting
1851 myList="${list%% *}"
1853 while [[ "$list" != ${myList##* } ]]; do
1854 list=${list//${list%% *} /}
1855 myList="$myList ${list%% *}"
1857 myList="${myList%* }";
1859 # We can select an object at a offset in the list
1862 for item in $myList; do
1864 [ $cnt -eq $offset ] && {
1868 [ $(get_node_count $myList) -ne 1 ] && myList=""
1876 [ "$facet" == client ] && echo -n $HOSTNAME && return
1877 varname=${facet}_HOST
1878 if [ -z "${!varname}" ]; then
1879 if [ "${facet:0:3}" == "ost" ]; then
1880 eval ${facet}_HOST=${ost_HOST}
1888 local activevar=${facet}active
1890 if [ -f $TMP/${facet}active ] ; then
1891 source $TMP/${facet}active
1894 active=${!activevar}
1895 if [ -z "$active" ] ; then
1902 facet_active_host() {
1904 local active=`facet_active $facet`
1905 if [ "$facet" == client ]; then
1908 echo `facet_host $active`
1916 facetlist=$(exclude_items_from_list $facetlist mgs)
1918 for facet in ${facetlist//,/ }; do
1919 local failover=${facet}failover
1920 local host=`facet_host $failover`
1921 [ -z "$host" ] && return
1923 local curactive=`facet_active $facet`
1924 if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
1925 eval export ${facet}active=$facet
1927 eval export ${facet}active=$failover
1929 # save the active host for this facet
1930 local activevar=${facet}active
1931 echo "$activevar=${!activevar}" > $TMP/$activevar
1932 [[ $facet = mds1 ]] && combined_mgs_mds && \
1933 echo "mgsactive=${!activevar}" > $TMP/mgsactive
1934 local TO=`facet_active_host $facet`
1935 echo "Failover $facet to $TO"
1941 # do not stripe off hostname if verbose, bug 19215
1942 if [ x$1 = x--verbose ]; then
1950 if [ "$HOST" = "$HOSTNAME" ]; then
1952 elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
1953 echo "cannot run remote command on $HOST with $myPDSH"
1957 echo "CMD: $HOST $@" >&2
1958 $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
1961 if [ "$myPDSH" = "rsh" ]; then
1962 # we need this because rsh does not return exit code of an executed command
1963 local command_status="$TMP/cs"
1964 rsh $HOST ":> $command_status"
1965 rsh $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin;
1966 cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\") ||
1967 echo command failed >$command_status"
1968 [ -n "$($myPDSH $HOST cat $command_status)" ] && return 1 || true
1973 # print HOSTNAME for myPDSH="no_dsh"
1974 if [[ $myPDSH = no_dsh ]]; then
1975 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed -e "s/^/${HOSTNAME}: /"
1977 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")"
1980 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed "s/^${HOST}: //"
1982 return ${PIPESTATUS[0]}
1986 do_node --verbose "$@"
1989 single_local_node () {
1990 [ "$1" = "$HOSTNAME" ]
1993 # Outputs environment variable assignments that should be passed to remote nodes
1998 for var in ${!MODOPTS_*}; do
2000 echo "${var}=\"$value\""
2006 # do not stripe off hostname if verbose, bug 19215
2007 if [ x$1 = x--verbose ]; then
2015 if single_local_node $rnodes; then
2017 do_nodev $rnodes "$@"
2019 do_node $rnodes "$@"
2024 # This is part from do_node
2027 [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
2028 echo "cannot run remote command on $rnodes with $myPDSH" && return 128
2030 export FANOUT=$(get_node_count "${rnodes//,/ }")
2032 echo "CMD: $rnodes $@" >&2
2033 $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
2036 # do not replace anything from pdsh output if -N is used
2037 # -N Disable hostname: prefix on lines of output.
2038 if $verbose || [[ $myPDSH = *-N* ]]; then
2039 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")"
2041 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")" | sed -re "s/^[^:]*: //g"
2043 return ${PIPESTATUS[0]}
2049 local HOST=`facet_active_host $facet`
2050 [ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
2055 do_nodes --verbose "$@"
2061 # make sure its not already running
2063 rm -f $TMP/${facet}active
2064 [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
2065 do_facet ${facet} $MKFS $*
2071 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
2072 eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}}
2079 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
2080 eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}}
2086 [[ $facet = mgs ]] && combined_mgs_mds && facet="mds1"
2088 local var=${facet}_MOUNT
2089 eval mntpt=${!var:-${MOUNT%/*}/$facet}
2098 # make sure we are using the primary server, so test-framework will
2099 # be able to clean up properly.
2100 activemds=`facet_active mds1`
2101 if [ $activemds != "mds1" ]; then
2105 local clients=$CLIENTS
2106 [ -z $clients ] && clients=$(hostname)
2108 zconf_umount_clients $clients $MOUNT "$*" || true
2109 [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
2111 [ "$CLIENTONLY" ] && return
2112 # The add fn does rm ${facet}active file, this would be enough
2113 # if we use do_facet <facet> only after the facet added, but
2114 # currently we use do_facet mds in local.sh
2115 for num in `seq $MDSCOUNT`; do
2117 rm -f ${TMP}/mds${num}active
2119 combined_mgs_mds && rm -f $TMP/mgsactive
2121 for num in `seq $OSTCOUNT`; do
2123 rm -f $TMP/ost${num}active
2126 if ! combined_mgs_mds ; then
2133 cleanup_echo_devs () {
2134 local devs=$($LCTL dl | grep echo | awk '{print $4}')
2136 for dev in $devs; do
2137 $LCTL --device $dev cleanup
2138 $LCTL --device $dev detach
2143 nfs_client_mode && return
2152 combined_mgs_mds () {
2153 [[ $MDSDEV1 = $MGSDEV ]] && [[ $mds1_HOST = $mgs_HOST ]]
2159 local tgt=$(echo $facet | tr -d [:digit:] | tr "[:lower:]" "[:upper:]")
2160 local optvar=${tgt}_MKFS_OPTS
2161 local opt=${!optvar}
2163 # FIXME: ! combo mgs/mds + mgsfailover is not supported yet
2164 [[ $facet = mgs ]] && echo $opt && return
2167 # --failnode options
2168 local var=${facet}failover_HOST
2169 if [ x"${!var}" != x ] && [ x"${!var}" != x$(facet_host $facet) ] ; then
2170 local failnode=$(h2$NETTYPE ${!var})
2171 failnode="--failnode=$failnode"
2172 # options does not contain
2173 # or contains wrong --failnode=
2174 if [[ $opt != *${failnode}* ]]; then
2175 opt=$(echo $opt | sed 's/--failnode=.* / /')
2176 opt="$opt $failnode"
2182 # no additional mkfs mds "--mgsnode" option for this configuration
2183 if [[ $facet = mds ]] && combined_mgs_mds; then
2188 # additional mkfs "--mgsnode"
2189 local mgsnode="--mgsnode=$MGSNID"
2190 opt=${opt//$mgsnode }
2191 for nid in ${MGSNID//:/ }; do
2192 local mgsnode="--mgsnode=$nid"
2193 # options does not contain
2195 if [[ $opt != *${mgsnode}" "* ]]; then
2196 opt="$opt --mgsnode=$nid"
2204 if [ "$IAMDIR" == "yes" ]; then
2205 MDS_MKFS_OPTS="$MDS_MKFS_OPTS --iam-dir"
2208 [ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
2211 # We need ldiskfs here, may as well load them all
2213 [ "$CLIENTONLY" ] && return
2214 echo Formatting mgs, mds, osts
2215 if ! combined_mgs_mds ; then
2216 add mgs $(mkfs_opts mgs) $FSTYPE_OPT --reformat $MGSDEV || exit 10
2219 for num in `seq $MDSCOUNT`; do
2220 echo "Format mds$num: $(mdsdevname $num)"
2222 add mds$num $(mkfs_opts mds) $FSTYPE_OPT --reformat $(mdsdevname $num) || exit 10
2224 add mds$num $(mkfs_opts mds) $FSTYPE_OPT --reformat $(mdsdevname $num) > /dev/null || exit 10
2228 # the ost-s could have different OST_MKFS_OPTS
2229 # because of different failnode-s
2230 for num in `seq $OSTCOUNT`; do
2231 echo "Format ost$num: $(ostdevname $num)"
2233 add ost$num $(mkfs_opts ost${num}) $FSTYPE_OPT --reformat `ostdevname $num` || exit 10
2235 add ost$num $(mkfs_opts ost${num}) $FSTYPE_OPT --reformat `ostdevname $num` > /dev/null || exit 10
2241 grep " $1 " /proc/mounts || zconf_mount $HOSTNAME $*
2245 grep " $1 " /proc/mounts && zconf_umount `hostname` $*
2249 # 0: success, the old identity set already.
2250 # 1: success, the old identity does not set.
2255 local j=`expr $num - 1`
2256 local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
2258 if [ -z "$MDT" ]; then
2262 local old="`do_facet mds$num "lctl get_param -n mdt.$MDT.identity_upcall"`"
2265 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"$L_GETIDENTITY\""
2267 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"NONE\""
2270 do_facet mds$num "lctl set_param -n mdt/$MDT/identity_flush=-1"
2272 if [ $old = "NONE" ]; then
2281 zconf_umount `hostname` $1 || error "umount failed"
2282 zconf_mount `hostname` $1 || error "mount failed"
2285 writeconf_facet () {
2289 do_facet $facet "$TUNEFS --writeconf $dev"
2293 for num in `seq $MDSCOUNT`; do
2294 DEVNAME=$(mdsdevname $num)
2295 writeconf_facet mds$num $DEVNAME
2298 for num in `seq $OSTCOUNT`; do
2299 DEVNAME=$(ostdevname $num)
2300 writeconf_facet ost$num $DEVNAME
2305 nfs_client_mode && return
2307 sanity_mount_check ||
2308 error "environments are insane!"
2312 if [ -z "$CLIENTONLY" ]; then
2313 echo Setup mgs, mdt, osts
2314 echo $WRITECONF | grep -q "writeconf" && \
2316 if ! combined_mgs_mds ; then
2317 start mgs $MGSDEV $MGS_MOUNT_OPTS
2320 for num in `seq $MDSCOUNT`; do
2321 DEVNAME=$(mdsdevname $num)
2322 start mds$num $DEVNAME $MDS_MOUNT_OPTS
2324 # We started mds, now we should set failover variables properly.
2325 # Set mds${num}failover_HOST if it is not set (the default failnode).
2326 local varname=mds${num}failover_HOST
2327 if [ -z "${!varname}" ]; then
2328 eval mds${num}failover_HOST=$(facet_host mds$num)
2331 if [ $IDENTITY_UPCALL != "default" ]; then
2332 switch_identity $num $IDENTITY_UPCALL
2335 for num in `seq $OSTCOUNT`; do
2336 DEVNAME=$(ostdevname $num)
2337 start ost$num $DEVNAME $OST_MOUNT_OPTS
2339 # We started ost$num, now we should set ost${num}failover variable properly.
2340 # Set ost${num}failover_HOST if it is not set (the default failnode).
2341 varname=ost${num}failover_HOST
2342 if [ -z "${!varname}" ]; then
2343 eval ost${num}failover_HOST=$(facet_host ost${num})
2351 # wait a while to allow sptlrpc configuration be propogated to targets,
2352 # only needed when mounting new target devices.
2357 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
2359 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
2362 if [ "$MOUNT_2" ]; then
2363 mount_client $MOUNT2
2364 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
2369 # by remounting mdt before ost, initial connect from mdt to ost might
2370 # timeout because ost is not ready yet. wait some time to its fully
2371 # recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
2372 # by a context negotiation rpc with $TIMEOUT.
2373 # FIXME better by monitoring import status.
2376 sleep $((TIMEOUT + 5))
2382 mounted_lustre_filesystems() {
2383 awk '($3 ~ "lustre" && $1 ~ ":") { print $2 }' /proc/mounts
2386 init_facet_vars () {
2387 [ "$CLIENTONLY" ] && return 0
2394 eval export ${facet}_dev=${device}
2395 eval export ${facet}_opt=\"$@\"
2397 local dev=${facet}_dev
2398 local label=$(do_facet ${facet} "$E2LABEL ${!dev}")
2399 [ -z "$label" ] && echo no label for ${!dev} && exit 1
2401 eval export ${facet}_svc=${label}
2403 local varname=${facet}failover_HOST
2404 if [ -z "${!varname}" ]; then
2405 eval $varname=$(facet_host $facet)
2408 # ${facet}failover_dev is set in cfg file
2409 varname=${facet}failover_dev
2410 if [ -n "${!varname}" ] ; then
2411 eval export ${facet}failover_dev=${!varname}
2413 eval export ${facet}failover_dev=$device
2416 # get mount point of already mounted device
2417 # is facet_dev is already mounted then use the real
2418 # mount point of this facet; otherwise use $(facet_mntpt $facet)
2419 # i.e. ${facet}_MOUNT if specified by user or default
2420 local mntpt=$(do_facet ${facet} cat /proc/mounts | \
2421 awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
2422 if [ -z $mntpt ]; then
2423 mntpt=$(facet_mntpt $facet)
2425 eval export ${facet}_MOUNT=$mntpt
2428 init_facets_vars () {
2431 if ! remote_mds_nodsh; then
2432 for num in `seq $MDSCOUNT`; do
2433 DEVNAME=`mdsdevname $num`
2434 init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
2438 combined_mgs_mds || init_facet_vars mgs $MGSDEV $MGS_MOUNT_OPTS
2440 remote_ost_nodsh && return
2442 for num in `seq $OSTCOUNT`; do
2443 DEVNAME=`ostdevname $num`
2444 init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
2448 osc_ensure_active () {
2453 while [ $period -lt $timeout ]; do
2454 count=$(do_facet $facet "lctl dl | grep ' IN osc ' 2>/dev/null | wc -l")
2455 if [ $count -eq 0 ]; then
2459 echo "There are $count OST are inactive, wait $period seconds, and try again"
2461 period=$((period+3))
2464 [ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
2467 init_param_vars () {
2469 TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
2471 log "Using TIMEOUT=$TIMEOUT"
2473 osc_ensure_active $SINGLEMDS $TIMEOUT
2474 osc_ensure_active client $TIMEOUT
2476 if [ $QUOTA_AUTO -ne 0 ]; then
2477 if [ "$ENABLE_QUOTA" ]; then
2478 echo "enable quota as required"
2479 setup_quota $MOUNT || return 2
2481 echo "disable quota as required"
2482 $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
2489 nfs_client_mode () {
2490 if [ "$NFSCLIENT" ]; then
2491 echo "NFSCLIENT mode: setup, cleanup, check config skipped"
2492 local clients=$CLIENTS
2493 [ -z $clients ] && clients=$(hostname)
2495 # FIXME: remove hostname when 19215 fixed
2496 do_nodes $clients "echo \\\$(hostname); grep ' '$MOUNT' ' /proc/mounts"
2497 declare -a nfsexport=(`grep ' '$MOUNT' ' /proc/mounts | awk '{print $1}' | awk -F: '{print $1 " " $2}'`)
2498 if [[ ${#nfsexport[@]} -eq 0 ]]; then
2499 error_exit NFSCLIENT=$NFSCLIENT mode, but no NFS export found!
2501 do_nodes ${nfsexport[0]} "echo \\\$(hostname); df -T ${nfsexport[1]}"
2507 check_config_client () {
2510 local mounted=$(mount | grep " $mntpt ")
2511 if [ "$CLIENTONLY" ]; then
2513 # CLIENTONLY should not depend on *_HOST settings
2514 local mgc=$($LCTL device_list | awk '/MGC/ {print $4}')
2515 # in theory someone could create a new,
2516 # client-only config file that assumed lustre was already
2517 # configured and didn't set the MGSNID. If MGSNID is not set,
2518 # then we should use the mgs nid currently being used
2519 # as the default value. bug 18021
2520 [[ x$MGSNID = x ]] &&
2523 if [[ x$mgc != xMGC$MGSNID ]]; then
2524 if [ "$mgs_HOST" ]; then
2525 local mgc_ip=$(ping -q -c1 -w1 $mgs_HOST | grep PING | awk '{print $3}' | sed -e "s/(//g" -e "s/)//g")
2526 # [[ x$mgc = xMGC$mgc_ip@$NETTYPE ]] ||
2527 # error_exit "MGSNID=$MGSNID, mounted: $mounted, MGC : $mgc"
2533 local myMGS_host=$mgs_HOST
2534 if [ "$NETTYPE" = "ptl" ]; then
2535 myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
2538 echo Checking config lustre mounted on $mntpt
2539 local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
2540 mgshost=$(echo $mgshost | awk -F: '{print $1}')
2542 # if [ "$mgshost" != "$myMGS_host" ]; then
2543 # log "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
2544 # Please use correct config or set mds_HOST correctly!"
2549 check_config_clients () {
2550 local clients=${CLIENTS:-$HOSTNAME}
2553 nfs_client_mode && return
2555 do_rpc_nodes $clients check_config_client $mntpt
2557 sanity_mount_check ||
2558 error "environments are insane!"
2562 local mdstimeout=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
2563 local cltimeout=$(lctl get_param -n timeout)
2564 if [ $mdstimeout -ne $TIMEOUT ] || [ $mdstimeout -ne $cltimeout ]; then
2565 error "timeouts are wrong! mds: $mdstimeout, client: $cltimeout, TIMEOUT=$TIMEOUT"
2572 [ -z $mntpt ] && return 1
2573 local mounted=$(mounted_lustre_filesystems)
2575 echo $mounted' ' | grep -w -q $mntpt' '
2579 [ $(find $1 -maxdepth 1 -print | wc -l) = 1 ] && return 0
2583 # empty lustre filesystem may have empty directories lost+found and .lustre
2585 [ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
2586 -print | wc -l) = 1 ] || return 1
2587 [ ! -d $1/lost+found ] || is_empty_dir $1/lost+found && return 0
2588 [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre && return 0
2592 check_and_setup_lustre() {
2593 nfs_client_mode && return
2595 local MOUNTED=$(mounted_lustre_filesystems)
2599 # both MOUNT and MOUNT2 are not mounted
2600 if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
2601 [ "$REFORMAT" ] && formatall
2602 # setupall mounts both MOUNT and MOUNT2 (if MOUNT_2 is set)
2604 is_mounted $MOUNT || error "NAME=$NAME not mounted"
2605 export I_MOUNTED=yes
2609 elif is_mounted $MOUNT2; then
2611 # MOUNT2 is mounted, while MOUNT_2 is not set
2612 if ! [ "$MOUNT_2" ]; then
2613 cleanup_mount $MOUNT2
2614 export I_UMOUNTED2=yes
2617 # MOUNT2 is mounted, MOUNT_2 is set
2619 # FIXME: what to do if check_config failed?
2621 # 1) remote client has mounted other Lustre fs ?
2622 # 2) it has insane env ?
2623 # let's try umount MOUNT2 on all clients and mount it again:
2624 if ! check_config_clients $MOUNT2; then
2625 cleanup_mount $MOUNT2
2626 restore_mount $MOUNT2
2627 export I_MOUNTED2=yes
2632 # MOUNT is mounted MOUNT2 is not mounted
2633 elif [ "$MOUNT_2" ]; then
2634 restore_mount $MOUNT2
2635 export I_MOUNTED2=yes
2639 # FIXME: what to do if check_config failed?
2641 # 1) remote client has mounted other Lustre fs?
2642 # 2) lustre is mounted on remote_clients atall ?
2643 check_config_clients $MOUNT
2647 set_default_debug_nodes $(comma_list $(nodes_list))
2653 if [ "$ONLY" == "setup" ]; then
2659 local clients=${CLIENTS:-$HOSTNAME}
2662 zconf_mount_clients $clients $mntpt
2666 local clients=${CLIENTS:-$HOSTNAME}
2669 zconf_umount_clients $clients $mntpt
2672 cleanup_and_setup_lustre() {
2673 if [ "$ONLY" == "cleanup" -o "`mount | grep $MOUNT`" ]; then
2674 lctl set_param debug=0 || true
2676 if [ "$ONLY" == "cleanup" ]; then
2680 check_and_setup_lustre
2683 # Get all of the server target devices from a given server node and type.
2692 mdt) obd_type="osd" ;;
2693 ost) obd_type="obdfilter" ;; # needs to be fixed when OST also uses an OSD
2694 *) echo "invalid server type" && return 1 ;;
2697 devs=$(do_node $node "lctl get_param -n $obd_type*.*.mntdev")
2698 for dev in $devs; do
2700 *loop*) do_node $node "losetup $dev" | \
2701 sed -e "s/.*(//" -e "s/).*//" ;;
2707 # Get all of the server target devices.
2712 MDTDEV=$(get_mnt_devs $(mdts_nodes) mdt)
2716 for node in $(osts_nodes); do
2717 OSTDEVS[i]=$(get_mnt_devs $node ost)
2722 # Run e2fsck on MDT or OST device.
2728 df > /dev/null # update statfs data on disk
2729 local cmd="$E2FSCK -d -v -t -t -f -n $extra_opts $target_dev"
2732 do_node $node $cmd || rc=$?
2733 [ $rc -le $FSCK_MAX_ERR ] || \
2734 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
2738 # verify a directory is shared among nodes.
2739 check_shared_dir() {
2742 [ -z "$dir" ] && return 1
2743 do_rpc_nodes $(comma_list $(nodes_list)) check_logdir $dir
2744 check_write_access $dir || return 1
2748 # Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
2754 check_shared_dir $SHARED_DIRECTORY ||
2755 error "$SHARED_DIRECTORY isn't a shared directory"
2757 export MDSDB=$SHARED_DIRECTORY/mdsdb
2758 export OSTDB=$SHARED_DIRECTORY/ostdb
2760 [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
2762 run_e2fsck $(mdts_nodes) $MDTDEV "--mdsdb $MDSDB"
2767 for node in $(osts_nodes); do
2768 for dev in ${OSTDEVS[i]}; do
2769 run_e2fsck $node $dev "--mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
2770 OSTDB_LIST="$OSTDB_LIST $OSTDB-$ostidx"
2771 ostidx=$((ostidx + 1))
2778 local cmd="$LFSCK_BIN -c -l --mdsdb $MDSDB --ostdb $OSTDB_LIST $MOUNT"
2782 [ $rc -le $FSCK_MAX_ERR ] || \
2783 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
2784 echo "lfsck finished with rc=$rc"
2786 rm -rvf $MDSDB* $OSTDB* || true
2790 check_and_cleanup_lustre() {
2791 if [ "$LFSCK_ALWAYS" = "yes" -a "$TESTSUITE" != "lfsck" ]; then
2797 if is_mounted $MOUNT; then
2798 [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
2799 error "remove sub-test dirs failed"
2800 [ "$ENABLE_QUOTA" ] && restore_quota_type || true
2803 if [ "$I_UMOUNTED2" = "yes" ]; then
2804 restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
2807 if [ "$I_MOUNTED2" = "yes" ]; then
2808 cleanup_mount $MOUNT2
2811 if [ "$I_MOUNTED" = "yes" ]; then
2812 cleanupall -f || error "cleanup failed"
2820 wait_for_function () {
2823 # suppress fn both stderr and stdout
2824 if [ "$1" = "--quiet" ]; then
2826 quiet=" > /dev/null 2>&1"
2838 eval $fn $quiet && return 0
2840 wait=$((wait + sleep))
2841 [ $wait -lt $max ] || return 1
2842 echo waiting $fn, $((max - wait)) secs left ...
2852 echo `date +"%H:%M:%S (%s)"` waiting for $host network $max secs ...
2853 if ! wait_for_function --quiet "ping -c 1 -w 3 $host" $max $sleep ; then
2854 echo "Network not available!"
2858 echo `date +"%H:%M:%S (%s)"` network interface is UP
2867 # the sed converts spaces to commas, but leaves the last space
2868 # alone, so the line doesn't end with a comma.
2869 echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
2875 echo $list | grep -qw $item
2878 # list, excluded are the comma separated lists
2879 exclude_items_from_list () {
2885 for item in ${excluded//,/ }; do
2886 list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
2888 echo $(comma_list $list)
2891 # list, expand are the comma separated lists
2893 local list=${1//,/ }
2894 local expand=${2//,/ }
2897 expanded=$(for i in $list $expand; do echo $i; done | sort -u)
2898 echo $(comma_list $expanded)
2901 testslist_filter () {
2902 local script=$LUSTRE/tests/${TESTSUITE}.sh
2904 [ -f $script ] || return 0
2906 local start_at=$START_AT
2907 local stop_at=$STOP_AT
2909 local var=${TESTSUITE//-/_}_START_AT
2910 [ x"${!var}" != x ] && start_at=${!var}
2911 var=${TESTSUITE//-/_}_STOP_AT
2912 [ x"${!var}" != x ] && stop_at=${!var}
2914 sed -n 's/^test_\([^ (]*\).*/\1/p' $script | \
2915 awk ' BEGIN { if ("'${start_at:-0}'" != 0) flag = 1 }
2916 /^'${start_at}'$/ {flag = 0}
2917 {if (flag == 1) print $0}
2918 /^'${stop_at}'$/ { flag = 1 }'
2922 (cd `dirname $1`; echo $PWD/`basename $1`)
2926 local types=${1:-"OST MDS MGS"}
2930 for entry in $types; do
2931 local name=$(echo $entry | tr "[:upper:]" "[:lower:]")
2932 local type=$(echo $entry | tr "[:lower:]" "[:upper:]")
2935 MGS ) list="$list $name";;
2936 MDS|OST ) local count=${type}COUNT
2937 for ((i=1; i<=${!count}; i++)) do
2938 list="$list ${name}$i"
2940 * ) error "Invalid facet type"
2944 echo $(comma_list $list)
2947 ##################################
2948 # Adaptive Timeouts funcs
2951 # only check mds, we assume at_max is the same on all nodes
2952 local at_max=$(do_facet $SINGLEMDS "lctl get_param -n at_max")
2953 if [ $at_max -eq 0 ]; then
2964 # suppose that all ost-s have the same $at value set
2965 [ $facet != "ost" ] || facet=ost1
2967 do_facet $facet "lctl get_param -n $at"
2981 if [ $facet == "ost" ]; then
2982 facet=$(get_facets OST)
2983 elif [ $facet == "mds" ]; then
2984 facet=$(get_facets MDS)
2986 hosts=$(expand_list $hosts $(facets_hosts $facet))
2989 do_nodes $hosts lctl set_param at_max=$at_max
2992 ##################################
2996 # OBD_FAIL_MDS_ALL_REQUEST_NET
2998 do_facet $SINGLEMDS lctl set_param fail_loc=0x123
2999 do_facet client "$1" || RC=$?
3000 do_facet $SINGLEMDS lctl set_param fail_loc=0
3005 # OBD_FAIL_MDS_ALL_REPLY_NET
3007 do_facet $SINGLEMDS lctl set_param fail_loc=0x122
3008 do_facet client "$@" || RC=$?
3009 do_facet $SINGLEMDS lctl set_param fail_loc=0
3013 drop_reint_reply() {
3014 # OBD_FAIL_MDS_REINT_NET_REP
3016 do_facet $SINGLEMDS lctl set_param fail_loc=0x119
3017 do_facet client "$@" || RC=$?
3018 do_facet $SINGLEMDS lctl set_param fail_loc=0
3023 #define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
3025 do_facet ost1 lctl set_param fail_loc=0x214
3026 do_facet client "$1" || RC=$?
3027 do_facet client "sync"
3028 do_facet ost1 lctl set_param fail_loc=0
3032 drop_ldlm_cancel() {
3033 #define OBD_FAIL_LDLM_CANCEL 0x304
3035 do_facet client lctl set_param fail_loc=0x304
3036 do_facet client "$@" || RC=$?
3037 do_facet client lctl set_param fail_loc=0
3041 drop_bl_callback() {
3042 #define OBD_FAIL_LDLM_BL_CALLBACK 0x305
3044 do_facet client lctl set_param fail_loc=0x305
3045 do_facet client "$@" || RC=$?
3046 do_facet client lctl set_param fail_loc=0
3051 #define OBD_FAIL_LDLM_REPLY 0x30c
3053 do_facet $SINGLEMDS lctl set_param fail_loc=0x30c
3054 do_facet client "$@" || RC=$?
3055 do_facet $SINGLEMDS lctl set_param fail_loc=0
3063 echo "clearing fail_loc on $facet"
3064 do_facet $facet "lctl set_param fail_loc=0 2>/dev/null || true"
3067 set_nodes_failloc () {
3068 do_nodes $(comma_list $1) lctl set_param fail_loc=$2
3071 cancel_lru_locks() {
3072 $LCTL mark "cancel_lru_locks $1 start"
3073 for d in `lctl get_param -N ldlm.namespaces.*.lru_size | egrep -i $1`; do
3074 $LCTL set_param -n $d=clear
3076 $LCTL get_param ldlm.namespaces.*.lock_unused_count | egrep -i $1 | grep -v '=0'
3077 $LCTL mark "cancel_lru_locks $1 stop"
3082 NR_CPU=$(grep -c "processor" /proc/cpuinfo)
3083 DEFAULT_LRU_SIZE=$((100 * NR_CPU))
3084 echo "$DEFAULT_LRU_SIZE"
3089 lctl set_param ldlm.namespaces.*$1*.lru_size=0
3092 lru_resize_disable()
3094 lctl set_param ldlm.namespaces.*$1*.lru_size $(default_lru_size)
3099 for FILE in `lctl get_param -N "llite.*.dump_page_cache"`; do
3100 if [ `lctl get_param -n $FILE | wc -l` -gt 1 ]; then
3101 echo there is still data in page cache $FILE ?
3102 lctl get_param -n $FILE
3110 DEBUGSAVE="$(lctl get_param -n debug)"
3114 [ -n "$DEBUGSAVE" ] && \
3115 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=\\\"${DEBUGSAVE}\\\";"
3120 DEBUG_SIZE_SAVED="$(lctl get_param -n debug_mb)"
3123 debug_size_restore() {
3124 [ -n "$DEBUG_SIZE_SAVED" ] && \
3125 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE_SAVED"
3129 start_full_debug_logging() {
3134 local DEBUG_SIZE=150
3136 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE"
3137 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=$FULLDEBUG;"
3140 stop_full_debug_logging() {
3145 ##################################
3147 ##################################
3150 local TYPE=${TYPE:-"FAIL"}
3153 # do not dump logs if $1=false
3154 if [ "x$1" = "xfalse" ]; then
3159 log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
3162 # We need to dump the logs on all nodes
3164 gather_logs $(comma_list $(nodes_list))
3168 [ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
3169 echo "$@" > $LOGDIR/err
3174 local log=$TESTSUITELOG
3176 [ -f "$log" ] && grep -q FAIL: $log && status=1
3189 # use only if we are ignoring failures for this test, bugno required.
3190 # (like ALWAYS_EXCEPT, but run the test and ignore the results.)
3191 # e.g. error_ignore 5494 "your message"
3193 local TYPE="IGNORE (bz$1)"
3199 $FAIL_ON_SKIP_ENV && error false $@ || skip $@
3204 log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
3205 [ "$ALWAYS_SKIPPED" ] && \
3206 skip_logged ${TESTNAME} "$@" || true
3207 [ "$TESTSUITELOG" ] && \
3208 echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
3211 build_test_filter() {
3212 EXCEPT="$EXCEPT $(testslist_filter)"
3214 [ "$ONLY" ] && log "only running test `echo $ONLY`"
3218 [ "$EXCEPT$ALWAYS_EXCEPT" ] && \
3219 log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
3220 [ "$EXCEPT_SLOW" ] && \
3221 log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
3222 for E in $EXCEPT; do
3223 eval EXCEPT_${E}=true
3225 for E in $ALWAYS_EXCEPT; do
3226 eval EXCEPT_ALWAYS_${E}=true
3228 for E in $EXCEPT_SLOW; do
3229 eval EXCEPT_SLOW_${E}=true
3231 for G in $GRANT_CHECK_LIST; do
3232 eval GCHECK_ONLY_${G}=true
3237 if [[ $1 = [a-z]* ]]; then
3244 # print a newline if the last test was skipped
3245 export LAST_SKIPPED=
3246 export ALWAYS_SKIPPED=
3248 # Main entry into test-framework. This is called with the name and
3249 # description of a test. The name is used to find the function to run
3250 # the test using "test_$name".
3252 # This supports a variety of methods of specifying specific test to
3253 # run or not run. These need to be documented...
3258 export base=`basetest $1`
3259 if [ ! -z "$ONLY" ]; then
3261 if [ ${!testname}x != x ]; then
3262 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
3263 run_one_logged $1 "$2"
3267 if [ ${!testname}x != x ]; then
3268 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
3269 run_one_logged $1 "$2"
3277 if [ ${!testname}x != x ]; then
3279 TESTNAME=test_$1 skip "skipping excluded test $1"
3282 testname=EXCEPT_$base
3283 if [ ${!testname}x != x ]; then
3285 TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
3288 testname=EXCEPT_ALWAYS_$1
3289 if [ ${!testname}x != x ]; then
3292 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
3295 testname=EXCEPT_ALWAYS_$base
3296 if [ ${!testname}x != x ]; then
3299 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
3302 testname=EXCEPT_SLOW_$1
3303 if [ ${!testname}x != x ]; then
3305 TESTNAME=test_$1 skip "skipping SLOW test $1"
3308 testname=EXCEPT_SLOW_$base
3309 if [ ${!testname}x != x ]; then
3311 TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
3317 run_one_logged $1 "$2"
3328 module_loaded lnet || load_modules
3340 do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
3345 strace -o $TMP/$1.strace -ttt $*
3347 log "FINISHED: $*: rc $RC"
3352 equals_msg $1 test complete, duration $2 sec
3353 [ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
3354 echo duration $2 >>$TESTSUITELOG
3358 # Set TEST_STATUS here; will be used for logging the result
3359 if [ -f $LOGDIR/err ]; then
3364 echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
3368 local FFREE=$(do_node $SINGLEMDS \
3369 lctl get_param -n osd*.*MDT*.filesfree | calc_sum)
3370 local FTOTAL=$(do_node $SINGLEMDS \
3371 lctl get_param -n osd*.*MDT*.filestotal | calc_sum)
3373 [ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
3377 echo -n "Resetting fail_loc on all nodes..."
3378 do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 2>/dev/null || true"
3384 # Log a message (on all nodes) padded with "=" before and after.
3385 # Also appends a timestamp and prepends the testsuite name.
3388 EQUALS="===================================================================================================="
3390 msg="== ${TESTSUITE} $*"
3392 [[ $last != "=" && $last != " " ]] && msg="$msg "
3393 msg=$(printf '%s%.*s' "$msg" $((${#EQUALS} - ${#msg})) $EQUALS )
3394 # always include at least == after the message
3395 log "$msg== $(date +"%H:%M:%S (%s)")"
3399 # Run a single test function and cleanup after it.
3401 # This function should be run in a subshell so the test func can
3402 # exit() without stopping the whole script.
3408 export tdir=d0.${TESTSUITE}/d${base}
3409 export TESTNAME=test_$testnum
3410 local SAVE_UMASK=`umask`
3413 banner "test $testnum: $message"
3414 test_${testnum} || error "test_$testnum failed with $?"
3417 check_grant ${testnum} || error "check_grant $testnum failed with $?"
3418 check_catastrophe || error "LBUG/LASSERT detected"
3419 ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
3427 # Wrapper around run_one to ensure:
3428 # - test runs in subshell
3429 # - output of test is saved to separate log file for error reporting
3430 # - test result is saved to data file
3433 local BEFORE=`date +%s`
3435 local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
3436 local test_log=$LOGDIR/$name
3438 local SAVE_UMASK=`umask`
3442 log_sub_test_begin test_${1}
3443 (run_one $1 "$2") 2>&1 | tee -i $test_log
3444 local RC=${PIPESTATUS[0]}
3446 [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
3447 echo "test_$1 returned $RC" | tee $LOGDIR/err
3449 duration=$((`date +%s` - $BEFORE))
3450 pass "$1" "(${duration}s)"
3451 [ -f $LOGDIR/err ] && TEST_ERROR=$(cat $LOGDIR/err)
3452 log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
3454 if [ -f $LOGDIR/err ]; then
3455 $FAIL_ON_ERROR && exit $RC
3464 # Print information of skipped tests to result.yml
3467 log_sub_test_begin $1
3468 log_sub_test_end "SKIP" "0" "0" "\"$2\""
3472 (cd `dirname $1`; echo $PWD/`basename $1`)
3477 export base=`basetest $1`
3478 [ "$CHECK_GRANT" == "no" ] && return 0
3480 testname=GCHECK_ONLY_${base}
3481 [ ${!testname}x == x ] && return 0
3483 echo -n "checking grant......"
3485 local clients=$CLIENTS
3486 [ -z $clients ] && clients=$(hostname)
3488 # sync all the data and make sure no pending data on server
3489 do_nodes $clients sync
3492 client_grant=`do_nodes $clients \
3493 "$LCTL get_param -n osc.${FSNAME}-*.cur_*grant_bytes" | \
3494 awk '{total += $1} END{print total}'`
3497 server_grant=`do_nodes $(comma_list $(osts_nodes)) \
3498 "$LCTL get_param -n obdfilter.${FSNAME}-OST*.tot_granted" |
3499 awk '{total += $1} END{print total}'`
3501 # check whether client grant == server grant
3502 if [ $client_grant -ne $server_grant ]; then
3503 echo "failed: client:${client_grant} server: ${server_grant}."
3504 do_nodes $(comma_list $(osts_nodes)) \
3505 "$LCTL get_param obdfilter.${FSNAME}-OST*.tot*"
3506 do_nodes $clients "$LCTL get_param osc.${FSNAME}-*.cur_*_bytes"
3509 echo "pass: client:${client_grant} server: ${server_grant}"
3514 ########################
3520 ost=`echo $1 | awk -F_ '{print $3}'`
3521 if [ -z $ost ]; then
3522 ost=`echo $1 | sed 's/-osc.*//'`
3527 ostuuid_from_index()
3529 $LFS osts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
3532 ostname_from_index() {
3533 local uuid=$(ostuuid_from_index $1)
3537 index_from_ostuuid()
3539 $LFS osts $2 | sed -ne "/${1}/s/\(.*\): .* .*$/\1/p"
3542 mdtuuid_from_index()
3544 $LFS mdts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
3549 [ "$node" != "$(hostname)" ]
3555 for node in $(mdts_nodes); do
3556 remote_node $node && return 0
3563 [ "$CLIENTONLY" ] && return 0 || true
3564 remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
3569 remote_mds_nodsh && echo "SKIP: $TESTSUITE: remote MDS with nodsh" && \
3570 MSKIPPED=1 && return 1
3577 for node in $(osts_nodes) ; do
3578 remote_node $node && return 0
3585 [ "$CLIENTONLY" ] && return 0 || true
3586 remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
3591 remote_ost_nodsh && echo "SKIP: $TESTSUITE: remote OST with nodsh" && \
3592 OSKIPPED=1 && return 1
3599 MGS=$(facet_host mgs)
3600 remote_node $MGS && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
3605 remote_mds_nodsh || remote_ost_nodsh || \
3606 $(single_local_node $(comma_list $(nodes_list)))
3612 for num in `seq $MDSCOUNT`; do
3613 MDSNODES="$MDSNODES $(facet_host mds$num)"
3615 NODES_sort=$(for i in $MDSNODES; do echo $i; done | sort -u)
3621 remote_ost && remote_mds
3629 for facet in ${facets//,/ }; do
3630 if [ "$FAILURE_MODE" = HARD ]; then
3631 nodes="$nodes $(facet_active_host $facet)"
3633 nodes="$nodes $(facet_host $facet)"
3636 NODES_sort=$(for i in $nodes; do echo $i; done | sort -u)
3642 local facets=$(get_facets OST)
3643 local nodes=$(facets_nodes $facets)
3649 # FIXME. We need a list of clients
3650 local myNODES=$HOSTNAME
3653 # CLIENTS (if specified) contains the local client
3654 [ -n "$CLIENTS" ] && myNODES=${CLIENTS//,/ }
3656 if [ "$PDSH" -a "$PDSH" != "no_dsh" ]; then
3657 myNODES="$myNODES $(facets_nodes $(get_facets))"
3660 myNODES_sort=$(for i in $myNODES; do echo $i; done | sort -u)
3665 remote_nodes_list () {
3666 local rnodes=$(nodes_list)
3667 rnodes=$(echo " $rnodes " | sed -re "s/\s+$HOSTNAME\s+/ /g")
3671 init_clients_lists () {
3672 # Sanity check: exclude the local client from RCLIENTS
3673 local clients=$(hostlist_expand "$RCLIENTS")
3674 local rclients=$(exclude_items_from_list "$clients" $HOSTNAME)
3676 # Sanity check: exclude the dup entries
3677 RCLIENTS=$(for i in ${rclients//,/ }; do echo $i; done | sort -u)
3679 clients="$SINGLECLIENT $HOSTNAME $RCLIENTS"
3681 # Sanity check: exclude the dup entries from CLIENTS
3682 # for those configs which has SINGLCLIENT set to local client
3683 clients=$(for i in $clients; do echo $i; done | sort -u)
3685 CLIENTS=$(comma_list $clients)
3686 local -a remoteclients=($RCLIENTS)
3687 for ((i=0; $i<${#remoteclients[@]}; i++)); do
3688 varname=CLIENT$((i + 2))
3689 eval $varname=${remoteclients[i]}
3692 CLIENTCOUNT=$((${#remoteclients[@]} + 1))
3695 get_random_entry () {
3698 rnodes=${rnodes//,/ }
3700 local -a nodes=($rnodes)
3701 local num=${#nodes[@]}
3702 local i=$((RANDOM * num * 2 / 65536))
3708 [ "$CLIENTONLY" ] || [ "$CLIENTMODSONLY" = yes ]
3713 lctl get_param version | grep -q patchless
3717 [ "$(lustre_version_code client)" = "$(lustre_version_code $SINGLEMDS)" -a \
3718 "$(lustre_version_code client)" = "$(lustre_version_code ost1)" ]
3723 echo $nodes | wc -w || true
3727 local nodes=$(osts_nodes)
3728 local osscount=$(get_node_count "$nodes")
3729 [ ! "$OSTCOUNT" = "$osscount" ]
3733 local nodes=$(mdts_nodes)
3734 local mdtcount=$(get_node_count "$nodes")
3735 [ ! "$MDSCOUNT" = "$mdtcount" ]
3738 generate_machine_file() {
3739 local nodes=${1//,/ }
3740 local machinefile=$2
3742 for node in $nodes; do
3743 echo $node >>$machinefile || \
3744 { echo "can not generate machinefile $machinefile" && return 1; }
3749 local file=$1/stripe
3751 $LFS getstripe -v $file || error
3755 setstripe_nfsserver () {
3758 local nfsserver=$(awk '"'$dir'" ~ $2 && $3 ~ "nfs" && $2 != "/" \
3759 { print $1 }' /proc/mounts | cut -f 1 -d : | head -1)
3761 [ -z $nfsserver ] && echo "$dir is not nfs mounted" && return 1
3763 do_nodev $nfsserver lfs setstripe "$@"
3766 check_runas_id_ret() {
3768 local myRUNAS_UID=$1
3769 local myRUNAS_GID=$2
3772 if [ -z "$myRUNAS" ]; then
3773 error_exit "myRUNAS command must be specified for check_runas_id"
3776 $myRUNAS krb5_login.sh || \
3777 error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
3779 mkdir $DIR/d0_runas_test
3781 chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
3782 $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
3783 rm -rf $DIR/d0_runas_test
3788 local myRUNAS_UID=$1
3789 local myRUNAS_GID=$2
3792 check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
3793 error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
3794 Please set RUNAS_ID to some UID which exists on MDS and client or
3795 add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
3798 # obtain the UID/GID for MPI_USER
3802 MPI_USER_UID=$(do_facet client "getent passwd $mpi_user | cut -d: -f3;
3803 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the UID for $mpi_user"
3805 MPI_USER_GID=$(do_facet client "getent passwd $mpi_user | cut -d: -f4;
3806 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the GID for $mpi_user"
3809 # obtain and cache Kerberos ticket-granting ticket
3810 refresh_krb5_tgt() {
3811 local myRUNAS_UID=$1
3812 local myRUNAS_GID=$2
3815 if [ -z "$myRUNAS" ]; then
3816 error_exit "myRUNAS command must be specified for refresh_krb5_tgt"
3819 CLIENTS=${CLIENTS:-$HOSTNAME}
3820 do_nodes $CLIENTS "set -x
3821 if ! $myRUNAS krb5_login.sh; then
3822 echo "Failed to refresh Krb5 TGT for UID/GID $myRUNAS_UID/$myRUNAS_GID."
3827 # Run multiop in the background, but wait for it to print
3828 # "PAUSING" to its stdout before returning from this function.
3829 multiop_bg_pause() {
3830 MULTIOP_PROG=${MULTIOP_PROG:-multiop}
3834 TMPPIPE=/tmp/multiop_open_wait_pipe.$$
3837 echo "$MULTIOP_PROG $FILE v$ARGS"
3838 $MULTIOP_PROG $FILE v$ARGS > $TMPPIPE &
3840 echo "TMPPIPE=${TMPPIPE}"
3841 read -t 60 multiop_output < $TMPPIPE
3842 if [ $? -ne 0 ]; then
3847 if [ "$multiop_output" != "PAUSING" ]; then
3848 echo "Incorrect multiop output: $multiop_output"
3863 [ ${PIPESTATUS[0]} -eq 0 ] || rc=1
3869 inodes_available () {
3870 local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
3874 mdsrate_inodes_available () {
3875 local min_inodes=$(inodes_available)
3876 echo $((min_inodes * 99 / 100))
3879 # reset llite stat counters
3880 clear_llite_stats(){
3881 lctl set_param -n llite.*.stats 0
3884 # sum llite stat items
3885 calc_llite_stats() {
3886 local res=$(lctl get_param -n llite.*.stats |
3887 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
3891 # reset osc stat counters
3893 lctl set_param -n osc.*.osc_stats 0
3896 # sum osc stat items
3898 local res=$(lctl get_param -n osc.*.osc_stats |
3899 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
3904 awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
3907 calc_osc_kbytes () {
3908 df $MOUNT > /dev/null
3909 $LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
3912 # save_lustre_params(node, parameter_mask)
3913 # generate a stream of formatted strings (<node> <param name>=<param value>)
3914 save_lustre_params() {
3916 do_nodesv $1 "lctl get_param $2 | while read s; do echo \\\$s; done"
3919 # restore lustre parameters from input stream, produces by save_lustre_params
3920 restore_lustre_params() {
3924 while IFS=" =" read node name val; do
3925 do_node ${node//:/} "lctl set_param -n $name $val"
3929 check_catastrophe() {
3930 local rnodes=${1:-$(comma_list $(remote_nodes_list))}
3931 local C=$CATASTROPHE
3932 [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
3934 if [ $rnodes ]; then
3935 do_nodes $rnodes "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
3936 if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
3941 # CMD: determine mds index where directory inode presents
3944 local file=$dir/f0.get_mds_dir_tmpfile
3949 local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
3950 local -a oldused=($iused)
3952 openfile -f O_CREAT:O_LOV_DELAY_CREATE -m 0644 $file > /dev/null
3954 iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
3955 local -a newused=($iused)
3958 for ((i=0; i<${#newused[@]}; i++)); do
3959 if [ ${oldused[$i]} -lt ${newused[$i]} ]; then
3965 error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
3968 mdsrate_cleanup () {
3970 mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
3975 delayed_recovery_enabled () {
3976 local var=${SINGLEMDS}_svc
3977 do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
3980 ########################
3982 convert_facet2label() {
3985 if [ x$facet = xost ]; then
3989 local varsvc=${facet}_svc
3991 if [ -n ${!varsvc} ]; then
3994 error "No lablel for $facet!"
3998 get_clientosc_proc_path() {
3999 echo "${1}-osc-[^M]*"
4002 get_lustre_version () {
4003 local facet=${1:-"$SINGLEMDS"}
4004 do_facet $facet $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
4007 lustre_version_code() {
4008 local facet=${1:-"$SINGLEMDS"}
4009 version_code $(get_lustre_version $1)
4012 # If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
4013 # used by MDT would not be changed.
4014 # mdt lov: fsname-mdtlov
4015 # mdt osc: fsname-OSTXXXX-osc
4016 mds_on_old_device() {
4017 local mds=${1:-"$SINGLEMDS"}
4019 if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
4020 do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
4021 > /dev/null 2>&1" && return 0
4026 get_mdtosc_proc_path() {
4028 local ost_label=${2:-"*OST*"}
4030 [ "$mds_facet" = "mds" ] && mds_facet=$SINGLEMDS
4031 local mdt_label=$(convert_facet2label $mds_facet)
4032 local mdt_index=$(echo $mdt_label | sed -e 's/^.*-//')
4034 if [ $(lustre_version_code $mds_facet) -le $(version_code 1.8.0) ] ||
4035 mds_on_old_device $mds_facet; then
4036 echo "${ost_label}-osc"
4038 echo "${ost_label}-osc-${mdt_index}"
4042 get_osc_import_name() {
4045 local label=$(convert_facet2label $ost)
4047 if [ "${facet:0:3}" = "mds" ]; then
4048 get_mdtosc_proc_path $facet $label
4052 get_clientosc_proc_path $label
4056 _wait_import_state () {
4059 local maxtime=${3:-$(max_recovery_time)}
4063 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4064 while [ "${CONN_STATE}" != "${expected}" ]; do
4065 if [ "${expected}" == "DISCONN" ]; then
4066 # for disconn we can check after proc entry is removed
4067 [ "x${CONN_STATE}" == "x" ] && return 0
4068 # with AT enabled, we can have connect request timeout near of
4069 # reconnect timeout and test can't see real disconnect
4070 [ "${CONN_STATE}" == "CONNECTING" ] && return 0
4072 [ $i -ge $maxtime ] && \
4073 error "can't put import for $CONN_PROC into ${expected} state after $i sec, have ${CONN_STATE}" && \
4076 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4080 log "$CONN_PROC in ${CONN_STATE} state after $i sec"
4084 wait_import_state() {
4087 local maxtime=${3:-$(max_recovery_time)}
4090 for param in ${params//,/ }; do
4091 _wait_import_state $state $param $maxtime || return
4095 # One client request could be timed out because server was not ready
4096 # when request was sent by client.
4097 # The request timeout calculation details :
4099 # /* We give the server rq_timeout secs to process the req, and
4100 # add the network latency for our local timeout. */
4101 # request->rq_deadline = request->rq_sent + request->rq_timeout +
4102 # ptlrpc_at_get_net_latency(request) ;
4104 # ptlrpc_connect_import ()
4105 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
4108 # -> at_init(&at->iat_net_latency, 0, 0) -> iat_net_latency=0
4109 # ptlrpc_at_get_net_latency(request) ->
4110 # at_get (max (iat_net_latency=0, at_min)) = at_min
4113 # request->rq_timeout + ptlrpc_at_get_net_latency(request) =
4114 # INITIAL_CONNECT_TIMEOUT + at_min
4116 # We will use obd_timeout instead of INITIAL_CONNECT_TIMEOUT
4117 # because we can not get this value in runtime,
4118 # the value depends on configure options, and it is not stored in /proc.
4120 # #define CONNECTION_SWITCH_MIN 5U
4122 # #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
4124 # #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/2)
4126 request_timeout () {
4129 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
4130 local init_connect_timeout=$TIMEOUT
4131 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
4133 local at_min=$(at_get $facet at_min)
4135 echo $(( init_connect_timeout + at_min ))
4138 wait_osc_import_state() {
4142 local ost=$(get_osc_import_name $facet $ost_facet)
4144 local param="osc.${ost}.ost_server_uuid"
4146 # 1. wait the deadline of client 1st request (it could be skipped)
4147 # 2. wait the deadline of client 2nd request
4148 local maxtime=$(( 2 * $(request_timeout $facet)))
4150 if ! do_rpc_nodes $(facet_host $facet) \
4151 _wait_import_state $expected $param $maxtime; then
4152 error "import is not in ${expected} state"
4159 get_clientmdc_proc_path() {
4167 # Add paths to lustre tests for 32 and 64 bit systems.
4168 local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
4169 do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
4172 wait_clients_import_state () {
4179 if [ "$FAILURE_MODE" = HARD ]; then
4180 facets=$(facets_on_host $(facet_active_host $facet))
4183 for facet in ${facets//,/ }; do
4184 local label=$(convert_facet2label $facet)
4187 ost* ) proc_path="osc.$(get_clientosc_proc_path $label).ost_server_uuid" ;;
4188 mds* ) proc_path="mdc.$(get_clientmdc_proc_path $label).mds_server_uuid" ;;
4189 *) error "unknown facet!" ;;
4191 local params=$(expand_list $params $proc_path)
4194 if ! do_rpc_nodes $list wait_import_state $expected $params; then
4195 error "import is not in ${expected} state"
4204 AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
4205 $LCTL get_param obdfilter.*.kbytesavail))
4206 GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
4207 $LCTL get_param -n obdfilter.*.tot_granted))
4208 for ((i=0; i<${#AVAILA[@]}; i++)); do
4209 local -a AVAIL1=(${AVAILA[$i]//=/ })
4210 GRANT=$((${GRANTA[$i]}/1024))
4211 echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} grnt=$GRANT diff=$((AVAIL1[1] - GRANT))
4212 [ $((AVAIL1[1] - GRANT)) -lt 400 ] && OSCFULL=0 && echo " FULL" || echo
4218 do_facet mgs lctl pool_list $1
4222 local fsname=${1%%.*}
4223 local poolname=${1##$fsname.}
4225 do_facet mgs lctl pool_new $1
4227 # get param should return err unless pool is created
4228 [[ $RC -ne 0 ]] && return $RC
4230 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
4231 2>/dev/null || echo foo" "" || RC=1
4232 if [[ $RC -eq 0 ]]; then
4235 error "pool_new failed $1"
4240 add_pool_to_list () {
4241 local fsname=${1%%.*}
4242 local poolname=${1##$fsname.}
4244 local listvar=${fsname}_CREATED_POOLS
4245 eval export ${listvar}=$(expand_list ${!listvar} $poolname)
4248 remove_pool_from_list () {
4249 local fsname=${1%%.*}
4250 local poolname=${1##$fsname.}
4252 local listvar=${fsname}_CREATED_POOLS
4253 eval export ${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
4256 destroy_pool_int() {
4258 local OSTS=$(do_facet $SINGLEMDS lctl pool_list $1 | \
4259 awk '$1 !~ /^Pool:/ {print $1}')
4260 for ost in $OSTS; do
4261 do_facet mgs lctl pool_remove $1 $ost
4263 do_facet mgs lctl pool_destroy $1
4266 # <fsname>.<poolname> or <poolname>
4268 local fsname=${1%%.*}
4269 local poolname=${1##$fsname.}
4271 [[ x$fsname = x$poolname ]] && fsname=$FSNAME
4275 pool_list $fsname.$poolname || return $?
4277 destroy_pool_int $fsname.$poolname
4279 [[ $RC -ne 0 ]] && return $RC
4281 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
4282 2>/dev/null || echo foo" "foo" || RC=1
4284 if [[ $RC -eq 0 ]]; then
4285 remove_pool_from_list $fsname.$poolname
4287 error "destroy pool failed $1"
4293 local fsname=${1:-$FSNAME}
4295 local listvar=${fsname}_CREATED_POOLS
4299 [ x${!listvar} = x ] && return 0
4301 echo destroy the created pools: ${!listvar}
4302 for poolname in ${!listvar//,/ }; do
4303 destroy_pool $fsname.$poolname
4308 local fsname=${1:-$FSNAME}
4310 destroy_pools $fsname
4316 local ts=$(date +%s)
4319 if [[ ! -f "$YAML_LOG" ]]; then
4320 # init_logging is not performed before gather_logs,
4321 # so the $LOGDIR needs to be checked here
4322 check_shared_dir $LOGDIR && touch $LOGDIR/shared
4325 [ -f $LOGDIR/shared ] && docp=false
4327 # dump lustre logs, dmesg
4329 prefix="$TESTLOG_PREFIX.$TESTNAME"
4331 echo "Dumping lctl log to ${prefix}.*.${suffix}"
4333 if [ "$CLIENTONLY" -o "$PDSH" == "no_dsh" ]; then
4334 echo "Dumping logs only on local client."
4335 $LCTL dk > ${prefix}.debug_log.$(hostname -s).${suffix}
4336 dmesg > ${prefix}.dmesg.$(hostname -s).${suffix}
4341 "$LCTL dk > ${prefix}.debug_log.\\\$(hostname -s).${suffix};
4342 dmesg > ${prefix}.dmesg.\\\$(hostname -s).${suffix}"
4343 if [ ! -f $LOGDIR/shared ]; then
4344 do_nodes $list rsync -az "${prefix}.*.${suffix}" $HOSTNAME:$LOGDIR
4357 for i in $(seq 0 $num_mntpts); do
4358 cmd="ls -laf ${mntpt_root}$i/$dir"
4364 for pid in $pids; do
4371 # target_start_and_reset_recovery_timer()
4372 # service_time = at_est2timeout(service_time);
4373 # service_time += 2 * (CONNECTION_SWITCH_MAX + CONNECTION_SWITCH_INC +
4374 # INITIAL_CONNECT_TIMEOUT);
4375 # CONNECTION_SWITCH_MAX : min(25U, max(CONNECTION_SWITCH_MIN,obd_timeout))
4376 #define CONNECTION_SWITCH_INC 1
4377 #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
4378 #define CONNECTION_SWITCH_MIN 5U
4380 max_recovery_time () {
4381 local init_connect_timeout=$(( TIMEOUT / 20 ))
4382 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
4384 local service_time=$(( $(at_max_get client) + $(( 2 * $(( 25 + 1 + init_connect_timeout)) )) ))
4389 get_clients_mount_count () {
4390 local clients=${CLIENTS:-`hostname`}
4392 # we need to take into account the clients mounts and
4393 # exclude mds/ost mounts if any;
4394 do_nodes $clients cat /proc/mounts | grep lustre | grep $MOUNT | wc -l
4398 PROC_CLI="srpc_info"
4406 if [ $M -lt $N ]; then
4410 while [ $N -lt $M ]; do
4420 calc_connection_cnt() {
4423 # MDT->MDT = 2 * C(M, 2)
4427 comb_m2=$(combination $MDSCOUNT 2)
4429 local num_clients=$(get_clients_mount_count)
4431 local cnt_mdt2mdt=$((comb_m2 * 2))
4432 local cnt_mdt2ost=$((MDSCOUNT * OSTCOUNT))
4433 local cnt_cli2ost=$((num_clients * OSTCOUNT))
4434 local cnt_cli2mdt=$((num_clients * MDSCOUNT))
4435 local cnt_all2ost=$((cnt_mdt2ost + cnt_cli2ost))
4436 local cnt_all2mdt=$((cnt_mdt2mdt + cnt_cli2mdt))
4437 local cnt_all2all=$((cnt_mdt2ost + cnt_mdt2mdt + cnt_cli2ost + cnt_cli2mdt))
4451 local cmd="$tgt.srpc.flavor"
4453 if [ $net == "any" ]; then
4458 if [ $dir != "any" ]; then
4463 log "Setting sptlrpc rule: $cmd"
4464 do_facet mgs "$LCTL conf_param $cmd"
4473 rpc_flvr=`echo $flavor | awk -F - '{ print $1 }'`
4474 bulkspec=`echo $flavor | awk -F - '{ print $2 }'`
4476 count=`echo "$output" | grep "rpc flavor" | grep $rpc_flvr | wc -l`
4478 if [ "x$bulkspec" != "x" ]; then
4479 algs=`echo $bulkspec | awk -F : '{ print $2 }'`
4481 if [ "x$algs" != "x" ]; then
4482 bulk_count=`echo "$output" | grep "bulk flavor" | grep $algs | wc -l`
4484 bulk=`echo $bulkspec | awk -F : '{ print $1 }'`
4485 if [ $bulk == "bulkn" ]; then
4486 bulk_count=`echo "$output" | grep "bulk flavor" \
4487 | grep "null/null" | wc -l`
4488 elif [ $bulk == "bulki" ]; then
4489 bulk_count=`echo "$output" | grep "bulk flavor" \
4490 | grep "/null" | grep -v "null/" | wc -l`
4492 bulk_count=`echo "$output" | grep "bulk flavor" \
4493 | grep -v "/null" | grep -v "null/" | wc -l`
4497 [ $bulk_count -lt $count ] && count=$bulk_count
4508 local clients=${CLIENTS:-`hostname`}
4510 for c in ${clients//,/ }; do
4511 output=`do_node $c lctl get_param -n mdc.*-MDT*-mdc-*.$PROC_CLI 2>/dev/null`
4512 tmpcnt=`count_flvr "$output" $flavor`
4513 cnt=$((cnt + tmpcnt))
4523 local clients=${CLIENTS:-`hostname`}
4525 for c in ${clients//,/ }; do
4526 output=`do_node $c lctl get_param -n osc.*OST*-osc-[^M][^D][^T]*.$PROC_CLI 2>/dev/null`
4527 tmpcnt=`count_flvr "$output" $flavor`
4528 cnt=$((cnt + tmpcnt))
4538 if [ $MDSCOUNT -le 1 ]; then
4543 for num in `seq $MDSCOUNT`; do
4544 output=`do_facet mds$num lctl get_param -n mdc.*-MDT*-mdc[0-9]*.$PROC_CLI 2>/dev/null`
4545 tmpcnt=`count_flvr "$output" $flavor`
4546 cnt=$((cnt + tmpcnt))
4557 for num in `seq $MDSCOUNT`; do
4558 mdtosc=$(get_mdtosc_proc_path mds$num)
4559 mdtosc=${mdtosc/-MDT*/-MDT\*}
4560 output=$(do_facet mds$num lctl get_param -n \
4561 osc.$mdtosc.$PROC_CLI 2>/dev/null)
4562 tmpcnt=`count_flvr "$output" $flavor`
4563 cnt=$((cnt + tmpcnt))
4572 output=`do_facet client lctl get_param -n mgc.*.$PROC_CLI 2>/dev/null`
4573 count_flvr "$output" $flavor
4578 local dir=$1 # from to
4579 local flavor=$2 # flavor expected
4582 if [ $dir == "cli2mdt" ]; then
4583 res=`flvr_cnt_cli2mdt $flavor`
4584 elif [ $dir == "cli2ost" ]; then
4585 res=`flvr_cnt_cli2ost $flavor`
4586 elif [ $dir == "mdt2mdt" ]; then
4587 res=`flvr_cnt_mdt2mdt $flavor`
4588 elif [ $dir == "mdt2ost" ]; then
4589 res=`flvr_cnt_mdt2ost $flavor`
4590 elif [ $dir == "all2ost" ]; then
4591 res1=`flvr_cnt_mdt2ost $flavor`
4592 res2=`flvr_cnt_cli2ost $flavor`
4593 res=$((res1 + res2))
4594 elif [ $dir == "all2mdt" ]; then
4595 res1=`flvr_cnt_mdt2mdt $flavor`
4596 res2=`flvr_cnt_cli2mdt $flavor`
4597 res=$((res1 + res2))
4598 elif [ $dir == "all2all" ]; then
4599 res1=`flvr_cnt_mdt2ost $flavor`
4600 res2=`flvr_cnt_cli2ost $flavor`
4601 res3=`flvr_cnt_mdt2mdt $flavor`
4602 res4=`flvr_cnt_cli2mdt $flavor`
4603 res=$((res1 + res2 + res3 + res4))
4611 local dir=$1 # from to
4612 local flavor=$2 # flavor expected
4613 local expect=${3:-$(calc_connection_cnt $dir)} # number expected
4617 for ((i=0;i<20;i++)); do
4618 echo -n "checking $dir..."
4619 res=$(do_check_flavor $dir $flavor)
4620 echo "found $res/$expect $flavor connections"
4621 [ $res -ge $expect ] && return 0
4625 echo "Error checking $flavor of $dir: expect $expect, actual $res"
4629 restore_to_default_flavor()
4631 local proc="mgs.MGS.live.$FSNAME"
4633 echo "restoring to default flavor..."
4635 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
4637 # remove all existing rules if any
4638 if [ $nrule -ne 0 ]; then
4639 echo "$nrule existing rules"
4640 for rule in `do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor."`; do
4641 echo "remove rule: $rule"
4642 spec=`echo $rule | awk -F = '{print $1}'`
4643 do_facet mgs "$LCTL conf_param -d $spec"
4647 # verify no rules left
4648 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
4649 [ $nrule -ne 0 ] && error "still $nrule rules left"
4651 # wait for default flavor to be applied
4652 # currently default flavor for all connections are 'null'
4653 wait_flavor all2all null
4654 echo "now at default flavor settings"
4659 local flavor=${1:-null}
4661 echo "setting all flavor to $flavor"
4663 # FIXME need parameter to this fn
4664 # and remove global vars
4665 local cnt_all2all=$(calc_connection_cnt all2all)
4667 local res=$(do_check_flavor all2all $flavor)
4668 if [ $res -eq $cnt_all2all ]; then
4669 echo "already have total $res $flavor connections"
4673 echo "found $res $flavor out of total $cnt_all2all connections"
4674 restore_to_default_flavor
4676 [[ $flavor = null ]] && return 0
4678 set_rule $FSNAME any any $flavor
4679 wait_flavor all2all $flavor
4685 # Checking for shared logdir
4686 if [ ! -d $dir ]; then
4687 # Not found. Create local logdir
4690 touch $dir/check_file.$(hostname -s)
4695 check_write_access() {
4700 for node in $(nodes_list); do
4701 file=$dir/check_file.$(short_hostname $node)
4702 if [[ ! -f "$file" ]]; then
4703 # Logdir not accessible/writable from this node.
4706 rm -f $file || return 1
4712 if [[ -n $YAML_LOG ]]; then
4715 local SAVE_UMASK=`umask`
4718 export YAML_LOG=${LOGDIR}/results.yml
4722 if [ ! -f $YAML_LOG ]; then # If the yaml log already exists then we will just append to it
4723 if check_shared_dir $LOGDIR; then
4724 touch $LOGDIR/shared
4725 echo "Logging to shared log directory: $LOGDIR"
4727 echo "Logging to local directory: $LOGDIR"
4730 yml_nodes_file $LOGDIR >> $YAML_LOG
4731 yml_results_file >> $YAML_LOG
4738 yml_log_test $1 >> $YAML_LOG
4742 yml_log_test_status $@ >> $YAML_LOG
4745 log_sub_test_begin() {
4746 yml_log_sub_test_begin "$@" >> $YAML_LOG
4749 log_sub_test_end() {
4750 yml_log_sub_test_end "$@" >> $YAML_LOG
4756 local llverdev_opts=$2
4757 local devname=$(basename $1)
4758 local size=$(grep "$devname"$ /proc/partitions | awk '{print $3}')
4759 # loop devices aren't in /proc/partitions
4760 [ "x$size" == "x" ] && local size=$(ls -l $dev | awk '{print $5}')
4762 size=$(($size / 1024 / 1024)) # Gb
4764 local partial_arg=""
4765 # Run in partial (fast) mode if the size
4766 # of a partition > 1 GB
4767 [ $size -gt 1 ] && partial_arg="-p"
4769 llverdev --force $partial_arg $llverdev_opts $dev
4775 local llverfs_opts=$2
4776 local partial_arg=""
4777 local size=$(df -B G $dir |tail -n 1 |awk '{print $2}' |sed 's/G//') #GB
4779 # Run in partial (fast) mode if the size
4780 # of a partition > 1 GB
4781 [ $size -gt 1 ] && partial_arg="-p"
4783 llverfs $partial_arg $llverfs_opts $dir
4786 remove_mdt_files() {
4791 local mntpt=$(facet_mntpt $facet)
4793 echo "removing files from $mdtdev on $facet: $files"
4794 mount -t $FSTYPE $MDS_MOUNT_OPTS $mdtdev $mntpt || return $?
4797 rm $mntpt/ROOT/$f || { rc=$?; break; }
4799 umount -f $mntpt || return $?
4803 duplicate_mdt_files() {
4808 local mntpt=$(facet_mntpt $facet)
4810 echo "duplicating files on $mdtdev on $facet: $files"
4811 mkdir -p $mntpt || return $?
4812 mount -t $FSTYPE $MDS_MOUNT_OPTS $mdtdev $mntpt || return $?
4822 tmp=$(mktemp $TMP/setfattr.XXXXXXXXXX)
4823 pushd $mntpt/ROOT > /dev/null || return $?
4826 touch $f.bad || return $?
4827 getfattr -n trusted.lov $f | sed "s#$f#&.bad#" > $tmp
4829 [ $rc -eq 0 ] || return $rc
4830 setfattr --restore $tmp || return $?
4836 local devs=${1//,/ }
4839 local rslt=$TMP/sgpdd_survey
4841 # sgpdd-survey cleanups ${rslt}.* files
4843 local cmd="rslt=$rslt $params scsidevs=\"$devs\" $SGPDDSURVEY"
4849 # returns the canonical name for an ldiskfs device
4854 do_facet $facet "dv=\\\$(lctl get_param -n $dev);
4855 if foo=\\\$(lvdisplay -c \\\$dv 2>/dev/null); then
4856 echo dm-\\\${foo##*:};
4858 echo \\\$(basename \\\$dv);
4862 is_sanity_benchmark() {
4863 local benchmarks="dbench bonnie iozone fsx"
4865 for b in $benchmarks; do
4866 if [ "$b" == "$suite" ]; then
4874 $LCTL get_param -n osc.*.kbytesavail | sort -n | head -n1
4877 # Get the block size of the filesystem.
4883 size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
4884 awk '/^Block size:/ {print $3}')
4888 # Check whether the "large_xattr" feature is enabled or not.
4889 large_xattr_enabled() {
4890 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
4892 do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
4893 return ${PIPESTATUS[0]}
4896 # Get the maximum xattr size supported by the filesystem.
4900 if large_xattr_enabled; then
4901 # include/linux/limits.h: #define XATTR_SIZE_MAX 65536
4904 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
4905 local block_size=$(get_block_size $SINGLEMDS $mds_dev)
4907 # maximum xattr size = size of block - size of header -
4908 # size of 1 entry - 4 null bytes
4909 size=$((block_size - 32 - 32 - 4))
4915 # Dump the value of the named xattr from a file.
4920 echo "$(getfattr -n $xattr_name --absolute-names --only-values $file)"
4923 # Generate a string with size of $size bytes.
4925 local size=${1:-1024} # in bytes
4927 echo "$(head -c $size < /dev/zero | tr '\0' y)"