3 trap 'print_summary && touch $TF_FAIL && \
4 echo "test-framework exiting on error"' ERR
8 export EJOURNAL=${EJOURNAL:-""}
9 export REFORMAT=${REFORMAT:-""}
10 export WRITECONF=${WRITECONF:-""}
11 export VERBOSE=${VERBOSE:-false}
12 export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
15 export GSS_PIPEFS=false
16 export IDENTITY_UPCALL=default
18 export JOBSTATS_AUTO=${JOBSTATS_AUTO:-1}
19 export JOBID_VAR=${JOBID_VAR:-"procname_uid"}
21 # LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
22 # LOAD_LLOOP is true. LOAD_LLOOP is false by default.
23 export LOAD_LLOOP=${LOAD_LLOOP:-false}
25 #export PDSH="pdsh -S -Rssh -w"
27 # function used by scripts run on remote nodes
28 LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
29 . $LUSTRE/tests/functions.sh
30 . $LUSTRE/tests/yaml.sh
32 export LD_LIBRARY_PATH=${LUSTRE}/utils:${LD_LIBRARY_PATH}
34 LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
36 EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
38 if [ -f "$EXCEPT_LIST_FILE" ]; then
39 echo "Reading test skip list from $EXCEPT_LIST_FILE"
44 # check config files for options in decreasing order of preference
45 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/lustre.conf ] &&
46 MODPROBECONF=/etc/modprobe.d/lustre.conf
47 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/Lustre ] &&
48 MODPROBECONF=/etc/modprobe.d/Lustre
49 [ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
50 MODPROBECONF=/etc/modprobe.conf
54 [[ $DIR/ = $MOUNT/* ]] || \
55 { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
56 [[ $DIR1/ = $MOUNT1/* ]] || \
57 { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
58 [[ $DIR2/ = $MOUNT2/* ]] || \
59 { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
61 [ -n "$failed" ] && exit 99 || true
65 echo "usage: $0 [-r] [-f cfgfile]"
73 [ "$TESTSUITE" == "lfsck" ] && return 0
74 [ -n "$ONLY" ] && echo "WARNING: ONLY is set to $(echo $ONLY)"
76 local form="%-13s %-17s %-9s %s %s\n"
77 printf "$form" "status" "script" "Total(sec)" "E(xcluded) S(low)"
78 echo "------------------------------------------------------------------------------------"
79 for O in $DEFAULT_SUITES; do
80 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
81 [ "${!O}" = "no" ] && continue || true
82 local o=$(echo $O | tr "[:upper:]_" "[:lower:]-")
83 local log=${TMP}/${o}.log
84 if is_sanity_benchmark $o; then
85 log=${TMP}/sanity-benchmark.log
90 local status=Unfinished
92 skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
93 slow=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | sort -nr -k 3 | head -5 | awk '{ print $2":"$3"s" }')
94 total=$(grep duration $log | awk '{ print $2}')
95 if [ "${!O}" = "done" ]; then
99 local durations=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | awk '{ print $2":"$3"|" }')
100 details=$(printf "%s\n%s %s %s\n" "$details" "DDETAILS" "$O" "$(echo $durations)")
103 printf "$form" $status "$O" "${total}" "E=$skipped"
104 printf "$form" "-" "-" "-" "S=$(echo $slow)"
107 for O in $DEFAULT_SUITES; do
108 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
109 if [ "${!O}" = "no" ]; then
110 printf "$form" "Skipped" "$O" ""
114 # print the detailed tests durations if DDETAILS=true
121 export LUSTRE=`absolute_path $LUSTRE`
122 export TESTSUITE=`basename $0 .sh`
123 export TEST_FAILED=false
124 export FAIL_ON_SKIP_ENV=${FAIL_ON_SKIP_ENV:-false}
126 export MKE2FS=$MKE2FS
127 if [ -z "$MKE2FS" ]; then
128 if which mkfs.ldiskfs >/dev/null 2>&1; then
129 export MKE2FS=mkfs.ldiskfs
135 export DEBUGFS=$DEBUGFS
136 if [ -z "$DEBUGFS" ]; then
137 if which debugfs.ldiskfs >/dev/null 2>&1; then
138 export DEBUGFS=debugfs.ldiskfs
140 export DEBUGFS=debugfs
144 export TUNE2FS=$TUNE2FS
145 if [ -z "$TUNE2FS" ]; then
146 if which tunefs.ldiskfs >/dev/null 2>&1; then
147 export TUNE2FS=tunefs.ldiskfs
149 export TUNE2FS=tune2fs
153 export E2LABEL=$E2LABEL
154 if [ -z "$E2LABEL" ]; then
155 if which label.ldiskfs >/dev/null 2>&1; then
156 export E2LABEL=label.ldiskfs
158 export E2LABEL=e2label
162 export DUMPE2FS=$DUMPE2FS
163 if [ -z "$DUMPE2FS" ]; then
164 if which dumpfs.ldiskfs >/dev/null 2>&1; then
165 export DUMPE2FS=dumpfs.ldiskfs
167 export DUMPE2FS=dumpe2fs
171 export E2FSCK=$E2FSCK
172 if [ -z "$E2FSCK" ]; then
173 if which fsck.ldiskfs >/dev/null 2>&1; then
174 export E2FSCK=fsck.ldiskfs
180 export LFSCK_BIN=${LFSCK_BIN:-lfsck}
181 export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
182 export FSCK_MAX_ERR=4 # File system errors left uncorrected
184 export ZFS=${ZFS:-zfs}
185 export ZPOOL=${ZPOOL:-zpool}
186 export ZDB=${ZDB:-zdb}
188 #[ -d /r ] && export ROOT=${ROOT:-/r}
189 export TMP=${TMP:-$ROOT/tmp}
190 export TESTSUITELOG=${TMP}/${TESTSUITE}.log
191 export LOGDIR=${LOGDIR:-${TMP}/test_logs/$(date +%s)}
192 export TESTLOG_PREFIX=$LOGDIR/$TESTSUITE
194 export HOSTNAME=${HOSTNAME:-$(hostname -s)}
195 if ! echo $PATH | grep -q $LUSTRE/utils; then
196 export PATH=$LUSTRE/utils:$PATH
198 if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
199 export PATH=$LUSTRE/utils/gss:$PATH
201 if ! echo $PATH | grep -q $LUSTRE/tests; then
202 export PATH=$LUSTRE/tests:$PATH
204 if ! echo $PATH | grep -q $LUSTRE/../lustre-iokit/sgpdd-survey; then
205 export PATH=$LUSTRE/../lustre-iokit/sgpdd-survey:$PATH
207 export LST=${LST:-"$LUSTRE/../lnet/utils/lst"}
208 [ ! -f "$LST" ] && export LST=$(which lst)
209 export SGPDDSURVEY=${SGPDDSURVEY:-"$LUSTRE/../lustre-iokit/sgpdd-survey/sgpdd-survey")}
210 [ ! -f "$SGPDDSURVEY" ] && export SGPDDSURVEY=$(which sgpdd-survey)
211 # Ubuntu, at least, has a truncate command in /usr/bin
212 # so fully path our truncate command.
213 export TRUNCATE=${TRUNCATE:-$LUSTRE/tests/truncate}
214 export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
215 [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
216 if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
217 export PATH=$LUSTRE/tests/racer:$PATH:
219 if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
220 export PATH=$LUSTRE/tests/mpi:$PATH
222 export RSYNC_RSH=${RSYNC_RSH:-rsh}
224 export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
225 [ ! -f "$LCTL" ] && export LCTL=$(which lctl)
226 export LFS=${LFS:-"$LUSTRE/utils/lfs"}
227 [ ! -f "$LFS" ] && export LFS=$(which lfs)
228 SETSTRIPE=${SETSTRIPE:-"$LFS setstripe"}
229 GETSTRIPE=${GETSTRIPE:-"$LFS getstripe"}
231 export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
232 if [ ! -f "$L_GETIDENTITY" ]; then
233 if `which l_getidentity > /dev/null 2>&1`; then
234 export L_GETIDENTITY=$(which l_getidentity)
236 export L_GETIDENTITY=NONE
239 export LL_DECODE_FILTER_FID=${LL_DECODE_FILTER_FID:-"$LUSTRE/utils/ll_decode_filter_fid"}
240 [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID="ll_decode_filter_fid"
241 export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
242 [ ! -f "$MKFS" ] && export MKFS="mkfs.lustre"
243 export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
244 [ ! -f "$TUNEFS" ] && export TUNEFS="tunefs.lustre"
245 export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
246 export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
247 [ ! -f "$LUSTRE_RMMOD" ] &&
248 export LUSTRE_RMMOD=$(which lustre_rmmod 2> /dev/null)
249 export LFS_MIGRATE=${LFS_MIGRATE:-$LUSTRE/scripts/lfs_migrate}
250 [ ! -f "$LFS_MIGRATE" ] &&
251 export LFS_MIGRATE=$(which lfs_migrate 2> /dev/null)
252 export NAME=${NAME:-local}
253 export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
254 [ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
255 export LGSSD=$(which lgssd)
256 export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
257 [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd 2> /dev/null)
258 export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
260 export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
263 if [ "$ACCEPTOR_PORT" ]; then
264 export PORT_OPT="--port $ACCEPTOR_PORT"
269 echo "Using GSS/krb5 ptlrpc security flavor"
270 which lgss_keyring > /dev/null 2>&1 || \
271 error_exit "built with gss disabled! SEC=$SEC"
282 IDENTITY_UPCALL=false
285 USE_OFD=${USE_OFD:-yes}
286 [ "$USE_OFD" = "yes" ] && LOAD_MODULES_REMOTE=true
288 export LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
290 # Paths on remote nodes, if different
291 export RLUSTRE=${RLUSTRE:-$LUSTRE}
292 export RPWD=${RPWD:-$PWD}
293 export I_MOUNTED=${I_MOUNTED:-"no"}
294 if [ ! -f /lib/modules/$(uname -r)/kernel/fs/lustre/mdt.ko -a \
295 ! -f /lib/modules/$(uname -r)/updates/kernel/fs/lustre/mdt.ko -a \
296 ! -f `dirname $0`/../mdt/mdt.ko ]; then
297 export CLIENTMODSONLY=yes
300 export SHUTDOWN_ATTEMPTS=${SHUTDOWN_ATTEMPTS:-3}
304 while getopts "rvwf:" opt $*; do
307 r) REFORMAT=--reformat;;
309 w) WRITECONF=writeconf;;
314 shift $((OPTIND - 1))
317 # print the durations of each test if "true"
318 DDETAILS=${DDETAILS:-false}
319 [ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
327 ncpts=$(do_facet $facet "lctl get_param -n " \
328 "cpu_partition_table 2>/dev/null| wc -l" || echo 1)
330 if [ $ncpts -eq 0 ]; then
338 # split arguments like "1.8.6-wc3" into "1", "8", "6", "wc3"
339 eval set -- $(tr "[:punct:]" " " <<< $*)
341 echo -n $((($1 << 16) | ($2 << 8) | $3))
344 export LINUX_VERSION=$(uname -r | sed -e "s/[-.]/ /3" -e "s/ .*//")
345 export LINUX_VERSION_CODE=$(version_code ${LINUX_VERSION//\./ })
348 /sbin/lsmod | grep -q "^\<$1\>"
351 # Load a module on the system where this is running.
353 # Synopsis: load_module module_name [module arguments for insmod/modprobe]
355 # If module arguments are not given but MODOPTS_<MODULE> is set, then its value
356 # will be used as the arguments. Otherwise arguments will be obtained from
357 # /etc/modprobe.conf, from /etc/modprobe.d/Lustre, or else none will be used.
364 BASE=`basename $module $EXT`
366 module_loaded ${BASE} && return
368 # If no module arguments were passed, get them from $MODOPTS_<MODULE>, else from
370 if [ $# -eq 0 ]; then
371 # $MODOPTS_<MODULE>; we could use associative arrays, but that's not in
372 # Bash until 4.x, so we resort to eval.
373 optvar="MODOPTS_$(basename $module | tr a-z A-Z)"
374 eval set -- \$$optvar
375 if [ $# -eq 0 -a -n "$MODPROBECONF" ]; then
376 # Nothing in $MODOPTS_<MODULE>; try modprobe.conf
377 set -- $(grep -P "^options\\s+${BASE}" $MODPROBECONF)
378 # Get rid of "options $module"
379 (($# > 0)) && shift 2
381 # Ensure we have accept=all for lnet
382 if [ $(basename $module) = lnet ]; then
383 # OK, this is a bit wordy...
384 local arg accept_all_present=false
386 [ "$arg" = accept=all ] && accept_all_present=true
388 $accept_all_present || set -- "$@" accept=all
393 [ $# -gt 0 ] && echo "${module} options: '$*'"
395 # Note that insmod will ignore anything in modprobe.conf, which is why we're
396 # passing options on the command-line.
397 if [ "$BASE" == "lnet_selftest" ] && \
398 [ -f ${LUSTRE}/../lnet/selftest/${module}${EXT} ]; then
399 insmod ${LUSTRE}/../lnet/selftest/${module}${EXT}
400 elif [ -f ${LUSTRE}/${module}${EXT} ]; then
401 insmod ${LUSTRE}/${module}${EXT} "$@"
403 # must be testing a "make install" or "rpm" installation
404 # note failed to load ptlrpc_gss is considered not fatal
405 if [ "$BASE" == "ptlrpc_gss" ]; then
406 modprobe $BASE "$@" 2>/dev/null || echo "gss/krb5 is not supported"
413 llite_lloop_enabled() {
414 local n1=$(uname -r | cut -d. -f1)
415 local n2=$(uname -r | cut -d. -f2)
416 local n3=$(uname -r | cut -d- -f1 | cut -d. -f3)
418 # load the llite_lloop module for < 2.6.32 kernels
419 if [[ $n1 -lt 2 ]] || [[ $n1 -eq 2 && $n2 -lt 6 ]] || \
420 [[ $n1 -eq 2 && $n2 -eq 6 && $n3 -lt 32 ]] || \
427 load_modules_local() {
428 [ $(facet_fstype ost1) == "zfs" ] && export USE_OFD=yes
430 if [ -n "$MODPROBE" ]; then
432 echo "Using modprobe to load modules"
436 echo Loading modules from $LUSTRE
440 if [ -f /sys/devices/system/cpu/online ]; then
441 ncpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/online) + 1))
442 echo "detected $ncpus online CPUs by sysfs"
444 ncpus=$(getconf _NPROCESSORS_CONF 2>/dev/null)
446 if [ $rc -eq 0 ]; then
447 echo "detected $ncpus online CPUs by getconf"
449 echo "Can't detect number of CPUs"
454 # if there is only one CPU core, libcfs can only create one partition
455 # if there is more than 4 CPU cores, libcfs should create multiple CPU
456 # partitions. So we just force libcfs to create 2 partitions for
457 # system with 2 or 4 cores
458 if [ $ncpus -le 4 ] && [ $ncpus -gt 1 ]; then
459 # force to enable multiple CPU partitions
460 echo "Force libcfs to create 2 CPU partitions"
461 MODOPTS_LIBCFS="cpu_npartitions=2 $MODOPTS_LIBCFS"
463 echo "libcfs will create CPU partition based on online CPUs"
466 load_module ../libcfs/libcfs/libcfs
468 [ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
469 [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
470 load_module ../lnet/lnet/lnet
471 LNETLND=${LNETLND:-"socklnd/ksocklnd"}
472 load_module ../lnet/klnds/$LNETLND
473 load_module lvfs/lvfs
474 load_module obdclass/obdclass
475 load_module ptlrpc/ptlrpc
476 load_module ptlrpc/gss/ptlrpc_gss
484 load_module obdecho/obdecho
485 if ! client_only; then
486 SYMLIST=/proc/kallsyms
487 grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
488 grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
489 grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
490 [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
491 if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
493 load_module osd-zfs/osd_zfs
497 if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
499 # This block shall be moved up beside osd-zfs as soon
500 # as osd-ldiskfs stops using mdd symbols.
502 grep -q exportfs_decode_fh $SYMLIST ||
503 { modprobe exportfs 2> /dev/null || true; }
504 load_module ../ldiskfs/ldiskfs/ldiskfs
505 load_module lvfs/fsfilt_ldiskfs
506 load_module osd-ldiskfs/osd_ldiskfs
517 load_module llite/lustre
518 llite_lloop_enabled && load_module llite/llite_lloop
519 [ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
521 rm -f $OGDB/ogdb-$HOSTNAME
522 $LCTL modules > $OGDB/ogdb-$HOSTNAME
524 # 'mount' doesn't look in $PATH, just sbin
525 if [ -f $LUSTRE/utils/mount.lustre ] && \
526 ! grep -qe "/sbin/mount\.lustre " /proc/mounts; then
527 [ ! -f /sbin/mount.lustre ] && touch /sbin/mount.lustre
528 mount --bind $LUSTRE/utils/mount.lustre /sbin/mount.lustre || true
535 # load modules on remote nodes optionally
536 # lustre-tests have to be installed on these nodes
537 if $LOAD_MODULES_REMOTE; then
538 local list=$(comma_list $(remote_nodes_list))
539 if [ -n "$list" ]; then
540 echo "loading modules on: '$list'"
541 do_rpc_nodes "$list" load_modules_local
547 LEAK_LUSTRE=$(dmesg | tail -n 30 | grep "obd_memory.*leaked" || true)
548 LEAK_PORTALS=$(dmesg | tail -n 20 | grep "Portals memory leaked" || true)
549 if [ "$LEAK_LUSTRE" -o "$LEAK_PORTALS" ]; then
550 echo "$LEAK_LUSTRE" 1>&2
551 echo "$LEAK_PORTALS" 1>&2
552 mv $TMP/debug $TMP/debug-leak.`date +%s` || true
553 echo "Memory leaks detected"
554 [ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
560 wait_exit_ST client # bug 12845
562 $LUSTRE_RMMOD ldiskfs || return 2
564 if $LOAD_MODULES_REMOTE; then
565 local list=$(comma_list $(remote_nodes_list))
566 if [ -n "$list" ]; then
567 echo "unloading modules on: '$list'"
568 do_rpc_nodes "$list" $LUSTRE_RMMOD ldiskfs
569 do_rpc_nodes "$list" check_mem_leak
573 if grep -qe "/sbin/mount\.lustre" /proc/mounts; then
574 umount /sbin/mount.lustre || true
575 [ -w /sbin/mount.lustre -a ! -s /sbin/mount.lustre ] && \
576 rm -f /sbin/mount.lustre || true
579 check_mem_leak || return 254
581 echo "modules unloaded."
585 check_gss_daemon_nodes() {
589 do_nodesv $list "num=\\\$(ps -o cmd -C $dname | grep $dname | wc -l);
590 if [ \\\"\\\$num\\\" -ne 1 ]; then
591 echo \\\$num instance of $dname;
596 check_gss_daemon_facet() {
600 num=`do_facet $facet ps -o cmd -C $dname | grep $dname | wc -l`
601 if [ $num -ne 1 ]; then
602 echo "$num instance of $dname on $facet"
611 echo Stopping $@ on $list
612 do_nodes $list "killall -2 $@ 2>/dev/null || true"
615 # start gss daemons on all nodes, or
616 # "daemon" on "list" if set
617 start_gss_daemons() {
621 if [ "$list" ] && [ "$daemon" ] ; then
622 echo "Starting gss daemon on nodes: $list"
623 do_nodes $list "$daemon" || return 8
627 local list=$(comma_list $(mdts_nodes))
629 echo "Starting gss daemon on mds: $list"
630 do_nodes $list "$LSVCGSSD -v" || return 1
632 do_nodes $list "$LGSSD -v" || return 2
635 list=$(comma_list $(osts_nodes))
636 echo "Starting gss daemon on ost: $list"
637 do_nodes $list "$LSVCGSSD -v" || return 3
638 # starting on clients
640 local clients=${CLIENTS:-`hostname`}
642 echo "Starting $LGSSD on clients $clients "
643 do_nodes $clients "$LGSSD -v" || return 4
646 # wait daemons entering "stable" status
650 # check daemons are running
652 list=$(comma_list $(mdts_nodes) $(osts_nodes))
653 check_gss_daemon_nodes $list lsvcgssd || return 5
655 list=$(comma_list $(mdts_nodes))
656 check_gss_daemon_nodes $list lgssd || return 6
659 check_gss_daemon_nodes $clients lgssd || return 7
664 local list=$(comma_list $(mdts_nodes))
666 send_sigint $list lsvcgssd lgssd
668 list=$(comma_list $(osts_nodes))
669 send_sigint $list lsvcgssd
671 list=${CLIENTS:-`hostname`}
672 send_sigint $list lgssd
677 if ! module_loaded ptlrpc_gss; then
678 load_module ptlrpc/gss/ptlrpc_gss
679 module_loaded ptlrpc_gss ||
680 error_exit "init_gss : GSS=$GSS, but gss/krb5 is not supported!"
682 start_gss_daemons || error_exit "start gss daemon failed! rc=$?"
684 if [ -n "$LGSS_KEYRING_DEBUG" ]; then
685 echo $LGSS_KEYRING_DEBUG > /proc/fs/lustre/sptlrpc/gss/lgss_keyring/debug_level
693 # maybe cleanup credential cache?
700 echo -n $facet | sed -e 's/^fs[0-9]\+//' -e 's/[0-9]\+//' |
701 tr '[:lower:]' '[:upper:]'
707 if [ $facet == mgs ]; then
711 echo -n $facet | sed -e 's/^fs[0-9]\+//' | sed -e 's/^[a-z]\+//'
719 if [ -n "${!var}" ]; then
724 var=$(facet_type $facet)FSTYPE
725 if [ -n "${!var}" ]; then
730 if [ -n "$FSTYPE" ]; then
742 local facets=$(get_facets)
745 for facet in ${facets//,/ }; do
746 if [ $node == $(facet_host $facet) ] ||
747 [ $node == "$(facet_failover_host $facet)" ]; then
748 fstype=$(facet_fstype $facet)
749 if [[ $fstypes != *$fstype* ]]; then
750 fstypes+="${fstypes:+,}$fstype"
761 local fstype=$(facet_fstype $facet)
765 label=$(do_facet ${facet} "$E2LABEL ${dev} 2>/dev/null");;
767 label=$(do_facet ${facet} "$ZFS get -H -o value lustre:svname \
768 ${dev} 2>/dev/null");;
770 error "unknown fstype!";;
778 local device=$(mdsdevname $num)
779 local label=$(devicelabel mds$num ${device} | grep -v "CMD: ")
785 local device=$(ostdevname $num)
786 local label=$(devicelabel ost$num ${device} | grep -v "CMD: ")
791 # This and set_obdfilter_param() shall be used to access OSD parameters
792 # once existed under "obdfilter":
797 # writethrough_cache_enable
799 get_obdfilter_param() {
801 local device=${2:-$FSNAME-OST*}
804 do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
805 osd-*.$device.$name 2>&1" | grep -v 'Found no match'
808 set_obdfilter_param() {
810 local device=${2:-$FSNAME-OST*}
814 do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
815 osd-*.$device.$name=$value 2>&1" | grep -v 'Found no match'
819 local dz=${1:-$DEBUG_SIZE}
821 if [ -f /sys/devices/system/cpu/possible ]; then
822 local cpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/possible)+1))
824 local cpus=$(getconf _NPROCESSORS_CONF)
827 # bug 19944, adjust size to be -gt num_possible_cpus()
828 # promise 2MB for every cpu at least
829 if [ -n "$cpus" ] && [ $((cpus * 2)) -gt $dz ]; then
832 lctl set_param debug_mb=$dz
835 set_default_debug () {
836 local debug=${1:-"$PTLDEBUG"}
837 local subsys=${2:-"$SUBSYSTEM"}
838 local debug_size=${3:-$DEBUG_SIZE}
840 [ -n "$debug" ] && lctl set_param debug="$debug" >/dev/null
841 [ -n "$subsys" ] && lctl set_param subsystem_debug="${subsys# }" >/dev/null
843 [ -n "$debug_size" ] && set_debug_size $debug_size > /dev/null
846 set_default_debug_nodes () {
849 if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
850 nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
854 do_rpc_nodes "$nodes" set_default_debug \
855 \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
858 set_default_debug_facet () {
860 local node=$(facet_active_host $facet)
861 [ -z "$node" ] && echo "No host defined for facet $facet" && exit 1
863 set_default_debug_nodes $node
868 local facets=${1:-$(get_facets)}
871 for facet in ${facets//,/ }; do
874 [ $RC -eq 0 ] && continue
876 if [ "$TESTSUITE.$TESTNAME" = "replay-dual.test_0a" ]; then
877 skip "Restart of $facet failed!." && touch $LU482_FAILED
879 error "Restart of $facet failed!"
886 # Add argument "arg" (e.g., "loop") to the comma-separated list
887 # of arguments for option "opt" (e.g., "-o") on command
888 # line "opts" (e.g., "-o flock").
894 local opt_pattern="\([[:space:]]\+\|^\)$opt"
896 if echo "$opts" | grep -q $opt_pattern; then
897 opts=$(echo "$opts" | sed -e \
898 "s/$opt_pattern[[:space:]]*[^[:space:]]\+/&,$arg/")
900 opts+="${opts:+ }$opt $arg"
908 local dev=$(facet_active $facet)_dev
909 local opt=${facet}_opt
910 local mntpt=$(facet_mntpt $facet)
911 local opts="${!opt} $@"
913 if [ $(facet_fstype $facet) == ldiskfs ] &&
914 ! do_facet $facet test -b ${!dev}; then
915 opts=$(csa_add "$opts" -o loop)
918 echo "Starting ${facet}: $opts ${!dev} $mntpt"
919 # for testing LU-482 error handling in mount_facets() and test_0a()
920 if [ -f $TMP/test-lu482-trigger ]; then
923 do_facet ${facet} "mkdir -p $mntpt; mount -t lustre $opts \
927 if [ $RC -ne 0 ]; then
928 echo "Start of ${!dev} on ${facet} failed ${RC}"
930 set_default_debug_facet $facet
932 label=$(devicelabel ${facet} ${!dev})
933 [ -z "$label" ] && echo no label for ${!dev} && exit 1
934 eval export ${facet}_svc=${label}
935 echo Started ${label}
940 # start facet device options
946 eval export ${facet}_dev=${device}
947 eval export ${facet}_opt=\"$@\"
949 local varname=${facet}failover_dev
950 if [ -n "${!varname}" ] ; then
951 eval export ${facet}failover_dev=${!varname}
953 eval export ${facet}failover_dev=$device
956 local mntpt=$(facet_mntpt $facet)
957 do_facet ${facet} mkdir -p $mntpt
958 eval export ${facet}_MOUNT=$mntpt
965 # When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
966 # Because stopping corresponding target may not clear this in-memory state, we
967 # need to zap the pool from memory by exporting and reimporting the pool.
969 # Although the uberblocks are not updated when a pool is freezed, transactions
970 # are still written to the disks. Modified blocks may be cached in memory when
971 # tests try reading them back. The export-and-reimport process also evicts any
972 # cached pool data from memory to provide the correct "data loss" semantics.
976 local fstype=$(facet_fstype $facet)
981 if [ "${fstype}" == "zfs" ]; then
982 _dev=$(facet_active $facet)_dev
983 dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
984 poolname="${dev%%/*}" # poolname is string before "/"
986 if [ "${poolname}" == "" ]; then
987 echo "invalid dataset name: $dev"
990 do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
991 do_facet $facet "$ZPOOL export ${poolname}"
992 do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
1001 local HOST=`facet_active_host $facet`
1002 [ -z $HOST ] && echo stop: no host for $facet && return 0
1004 local mntpt=$(facet_mntpt $facet)
1005 running=$(do_facet ${facet} "grep -c $mntpt' ' /proc/mounts") || true
1006 if [ ${running} -ne 0 ]; then
1007 echo "Stopping $mntpt (opts:$@) on $HOST"
1008 do_facet ${facet} umount -d $@ $mntpt
1011 # umount should block, but we should wait for unrelated obd's
1012 # like the MGS or MGC to also stop.
1013 wait_exit_ST ${facet}
1016 # save quota version (both administrative and operational quotas)
1017 # add an additional parameter if mountpoint is ever different from $MOUNT
1019 # XXX This function is kept for interoperability with old server (< 2.3.50),
1020 # it should be removed whenever we drop the interoperability for such
1022 quota_save_version() {
1023 local fsname=${2:-$FSNAME}
1025 local ver=$(tr -c -d "123" <<< $spec)
1026 local type=$(tr -c -d "ug" <<< $spec)
1028 [ -n "$ver" -a "$ver" != "3" ] && error "wrong quota version specifier"
1030 [ -n "$type" ] && { $LFS quotacheck -$type $MOUNT || error "quotacheck has failed"; }
1032 do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$spec"
1034 local osts=$(get_facets OST)
1035 for ost in ${osts//,/ }; do
1037 do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$spec"
1041 # client could mount several lustre
1043 # XXX This function is kept for interoperability with old server (< 2.3.50),
1044 # it should be removed whenever we drop the interoperability for such
1047 local fsname=${1:-$FSNAME}
1049 do_facet $SINGLEMDS lctl get_param mdd.${fsname}-MDT*.quota_type ||
1051 do_nodes $(comma_list $(osts_nodes)) \
1052 lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
1056 # XXX This function is kept for interoperability with old server (< 2.3.50),
1057 # it should be removed whenever we drop the interoperability for such
1059 restore_quota_old() {
1060 local mntpt=${1:-$MOUNT}
1061 local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
1062 if [ ! "$old_QUOTA_TYPE" ] ||
1063 [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
1066 quota_save_version $old_QUOTA_TYPE
1069 # XXX This function is kept for interoperability with old server (< 2.3.50),
1070 # it should be removed whenever we drop the interoperability for such
1075 # no quota enforcement for now and accounting works out of the box
1078 # We need save the original quota_type params, and restore them after testing
1080 # Suppose that quota type the same on mds and ost
1081 local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
1082 [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
1083 echo "[HOST:$HOSTNAME] [old_quota_type:$quota_type] [new_quota_type:$QUOTA_TYPE]"
1084 if [ "$quota_type" != "$QUOTA_TYPE" ]; then
1085 export old_QUOTA_TYPE=$quota_type
1086 quota_save_version $QUOTA_TYPE
1088 qtype=$(tr -c -d "ug" <<< $QUOTA_TYPE)
1089 $LFS quotacheck -$qtype $mntpt || error "quotacheck has failed for $type"
1092 local quota_usrs=$QUOTA_USERS
1094 # get_filesystem_size
1095 local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
1096 local blk_soft=$((disksz + 1024))
1097 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
1099 local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
1100 local i_soft=$Inodes
1101 local i_hard=$((i_soft + i_soft / 20))
1103 echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
1104 $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
1107 for usr in $quota_usrs; do
1108 echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
1110 cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
1112 eval $cmd || error "$cmd FAILED!"
1114 # display the quota status
1115 echo "Quota settings for $usr : "
1116 $LFS quota -v -u $usr $mntpt || true
1120 # get mdt quota type
1122 local varsvc=${SINGLEMDS}_svc
1123 do_facet $SINGLEMDS $LCTL get_param -n \
1124 osd-$(facet_fstype $SINGLEMDS).${!varsvc}.quota_slave.enabled
1127 # get ost quota type
1129 # All OSTs should have same quota type
1130 local varsvc=ost1_svc
1131 do_facet ost1 $LCTL get_param -n \
1132 osd-$(facet_fstype ost1).${!varsvc}.quota_slave.enabled
1135 # restore old quota type settings
1137 if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
1142 if [ "$old_MDT_QUOTA_TYPE" ]; then
1143 do_facet mgs $LCTL conf_param \
1144 $FSNAME.quota.mdt=$old_MDT_QUOTA_TYPE
1146 if [ "$old_OST_QUOTA_TYPE" ]; then
1147 do_facet mgs $LCTL conf_param \
1148 $FSNAME.quota.ost=$old_OST_QUOTA_TYPE
1153 if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
1160 # save old quota type & set new quota type
1161 local mdt_qtype=$(mdt_quota_type)
1162 local ost_qtype=$(ost_quota_type)
1164 echo "[HOST:$HOSTNAME] [old_mdt_qtype:$mdt_qtype]" \
1165 "[old_ost_qtype:$ost_qtype] [new_qtype:$QUOTA_TYPE]"
1167 export old_MDT_QUOTA_TYPE=$mdt_qtype
1168 export old_OST_QUOTA_TYPE=$ost_qtype
1170 do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$QUOTA_TYPE ||
1171 error "set mdt quota type failed"
1172 do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$QUOTA_TYPE ||
1173 error "set ost quota type failed"
1175 local quota_usrs=$QUOTA_USERS
1177 # get_filesystem_size
1178 local disksz=$(lfs df $mntpt | grep "filesystem summary:" |
1180 local blk_soft=$((disksz + 1024))
1181 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
1183 local inodes=$(lfs df -i $mntpt | grep "filesystem summary:" |
1185 local i_soft=$inodes
1186 local i_hard=$((i_soft + i_soft / 20))
1188 echo "Total disk size: $disksz block-softlimit: $blk_soft" \
1189 "block-hardlimit: $blk_hard inode-softlimit: $i_soft" \
1190 "inode-hardlimit: $i_hard"
1193 for usr in $quota_usrs; do
1194 echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
1196 cmd="$LFS setquota -$type $usr -b $blk_soft"
1197 cmd="$cmd -B $blk_hard -i $i_soft -I $i_hard $mntpt"
1199 eval $cmd || error "$cmd FAILED!"
1201 # display the quota status
1202 echo "Quota settings for $usr : "
1203 $LFS quota -v -u $usr $mntpt || true
1210 local OPTIONS=${3:-$MOUNTOPT}
1212 local device=$MGSNID:/$FSNAME
1213 if [ -z "$mnt" -o -z "$FSNAME" ]; then
1214 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
1218 echo "Starting client: $client: $OPTIONS $device $mnt"
1219 do_node $client mkdir -p $mnt
1220 do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
1222 set_default_debug_nodes $client
1234 [ "$3" ] && force=-f
1235 local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
1236 if [ $running -ne 0 ]; then
1237 echo "Stopping client $client $mnt (opts:$force)"
1238 do_node $client lsof -t $mnt || need_kill=no
1239 if [ "x$force" != "x" -a "x$need_kill" != "xno" ]; then
1240 pids=$(do_node $client lsof -t $mnt | sort -u);
1241 if [ -n $pids ]; then
1242 do_node $client kill -9 $pids || true
1246 busy=$(do_node $client "umount $force $mnt 2>&1" | grep -c "busy") || true
1247 if [ $busy -ne 0 ] ; then
1248 echo "$mnt is still busy, wait one second" && sleep 1
1249 do_node $client umount $force $mnt
1254 # nodes is comma list
1255 sanity_mount_check_nodes () {
1261 # FIXME: assume that all cluster nodes run the same os
1262 [ "$(uname)" = Linux ] || return 0
1265 for mnt in $mnts ; do
1266 do_nodes $nodes "running=\\\$(grep -c $mnt' ' /proc/mounts);
1267 mpts=\\\$(mount | grep -c $mnt' ');
1268 if [ \\\$running -ne \\\$mpts ]; then
1269 echo \\\$(hostname) env are INSANE!;
1272 [ $? -eq 0 ] || rc=1
1277 sanity_mount_check_servers () {
1278 [ "$CLIENTONLY" ] &&
1279 { echo "CLIENTONLY mode, skip mount_check_servers"; return 0; } || true
1280 echo Checking servers environments
1282 # FIXME: modify get_facets to display all facets wo params
1283 local facets="$(get_facets OST),$(get_facets MDS),mgs"
1287 for facet in ${facets//,/ }; do
1288 node=$(facet_host ${facet})
1289 mntpt=$(facet_mntpt $facet)
1290 sanity_mount_check_nodes $node $mntpt ||
1291 { error "server $node environments are insane!"; return 1; }
1295 sanity_mount_check_clients () {
1296 local clients=${1:-$CLIENTS}
1297 local mntpt=${2:-$MOUNT}
1298 local mntpt2=${3:-$MOUNT2}
1300 [ -z $clients ] && clients=$(hostname)
1301 echo Checking clients $clients environments
1303 sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
1304 error "clients environments are insane!"
1307 sanity_mount_check () {
1308 sanity_mount_check_servers || return 1
1309 sanity_mount_check_clients || return 2
1312 # mount clients if not mouted
1313 zconf_mount_clients() {
1316 local OPTIONS=${3:-$MOUNTOPT}
1318 local device=$MGSNID:/$FSNAME
1319 if [ -z "$mnt" -o -z "$FSNAME" ]; then
1320 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
1324 echo "Starting client $clients: $OPTIONS $device $mnt"
1327 running=\\\$(mount | grep -c $mnt' ');
1329 if [ \\\$running -eq 0 ] ; then
1331 mount -t lustre $OPTIONS $device $mnt;
1334 exit \\\$rc" || return ${PIPESTATUS[0]}
1336 echo "Started clients $clients: "
1337 do_nodes $clients "mount | grep $mnt' '"
1339 set_default_debug_nodes $clients
1344 zconf_umount_clients() {
1349 [ "$3" ] && force=-f
1351 echo "Stopping clients: $clients $mnt (opts:$force)"
1352 do_nodes $clients "running=\\\$(grep -c $mnt' ' /proc/mounts);
1353 if [ \\\$running -ne 0 ] ; then
1354 echo Stopping client \\\$(hostname) $mnt opts:$force;
1355 lsof $mnt || need_kill=no;
1356 if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
1357 pids=\\\$(lsof -t $mnt | sort -u);
1358 if [ -n \\\"\\\$pids\\\" ]; then
1362 while umount $force $mnt 2>&1 | grep -q "busy"; do
1363 echo "$mnt is still busy, wait one second" && sleep 1;
1370 echo + $POWER_DOWN $node
1374 shutdown_node_hard () {
1376 local attempts=$SHUTDOWN_ATTEMPTS
1378 for i in $(seq $attempts) ; do
1381 wait_for_function --quiet "! ping -w 3 -c 1 $host" 5 1 && return 0
1382 echo "waiting for $host to fail attempts=$attempts"
1383 [ $i -lt $attempts ] || \
1384 { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
1390 local mnt=${2:-$MOUNT}
1393 if [ "$FAILURE_MODE" = HARD ]; then
1394 shutdown_node_hard $client
1396 zconf_umount_clients $client $mnt -f
1402 local facets="$(get_facets OST),$(get_facets MDS)"
1405 combined_mgs_mds || facets="$facets,mgs"
1407 for facet in ${facets//,/ }; do
1408 if [ $(facet_active_host $facet) == $host ]; then
1409 affected="$affected $facet"
1413 echo $(comma_list $affected)
1418 local host=${2:-$(facet_host $facet)}
1420 local label=$(convert_facet2label $facet)
1421 do_node $host $LCTL dl | awk '{print $4}' | grep -q -x $label
1424 facets_up_on_host () {
1426 local facets=$(facets_on_host $host)
1429 for facet in ${facets//,/ }; do
1430 if $(facet_up $facet $host); then
1431 affected_up="$affected_up $facet"
1435 echo $(comma_list $affected_up)
1441 if [ "$FAILURE_MODE" = HARD ]; then
1442 shutdown_node_hard $(facet_active_host $facet)
1450 echo + $POWER_UP $node
1463 if [ "$FAILURE_MODE" = HARD ]; then
1464 reboot_node $(facet_active_host $facet)
1466 refresh_disk ${facet}
1473 if [ "$FAILURE_MODE" = HARD ]; then
1483 for facet in ${facets//,/ }; do
1484 hosts=$(expand_list $hosts $(facet_host $facet) )
1490 _check_progs_installed () {
1494 for prog in $progs; do
1495 if ! [ "$(which $prog)" -o "${!prog}" ]; then
1496 echo $prog missing on $(hostname)
1503 check_progs_installed () {
1507 do_rpc_nodes "$nodes" _check_progs_installed $@
1510 # recovery-scale functions
1512 echo __$(echo $1 | tr '-' '_' | tr '.' '_')
1515 start_client_load() {
1518 local var=$(node_var_name $client)_load
1519 eval export ${var}=$load
1521 do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
1522 BREAK_ON_ERROR=$BREAK_ON_ERROR \
1523 END_RUN_FILE=$END_RUN_FILE \
1524 LOAD_PID_FILE=$LOAD_PID_FILE \
1525 TESTLOG_PREFIX=$TESTLOG_PREFIX \
1526 TESTNAME=$TESTNAME \
1527 DBENCH_LIB=$DBENCH_LIB \
1528 DBENCH_SRC=$DBENCH_SRC \
1531 log "Started client load: ${load} on $client"
1533 # get the children process IDs
1534 local pids=$(ps --ppid $ppid -o pid= | xargs)
1535 CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $ppid $pids"
1539 start_client_loads () {
1540 local -a clients=(${1//,/ })
1541 local numloads=${#CLIENT_LOADS[@]}
1544 for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
1545 testnum=$((nodenum % numloads))
1546 start_client_load ${clients[nodenum]} ${CLIENT_LOADS[testnum]}
1548 # bug 22169: wait the background threads to start
1552 # only for remote client
1553 check_client_load () {
1555 local var=$(node_var_name $client)_load
1556 local TESTLOAD=run_${!var}.sh
1558 ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
1560 # bug 18914: try to connect several times not only when
1561 # check ps, but while check_catastrophe also
1564 while [ $RC = 254 -a $tries -gt 0 ]; do
1568 if ! check_catastrophe $client; then
1570 if [ $RC -eq 254 ]; then
1571 # FIXME: not sure how long we shuold sleep here
1575 echo "check catastrophe failed: RC=$RC "
1579 # We can continue try to connect if RC=254
1580 # Just print the warning about this
1581 if [ $RC = 254 ]; then
1582 echo "got a return status of $RC from do_node while checking catastrophe on $client"
1585 # see if the load is still on the client
1588 while [ $RC = 254 -a $tries -gt 0 ]; do
1592 if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
1597 if [ $RC = 254 ]; then
1598 echo "got a return status of $RC from do_node while checking (catastrophe and 'ps') the client load on $client"
1599 # see if we can diagnose a bit why this is
1604 check_client_loads () {
1605 local clients=${1//,/ }
1609 for client in $clients; do
1610 check_client_load $client
1612 if [ "$rc" != 0 ]; then
1613 log "Client load failed on node $client, rc=$rc"
1619 restart_client_loads () {
1620 local clients=${1//,/ }
1621 local expectedfail=${2:-""}
1625 for client in $clients; do
1626 check_client_load $client
1628 if [ "$rc" != 0 -a "$expectedfail" ]; then
1629 local var=$(node_var_name $client)_load
1630 start_client_load $client ${!var}
1631 echo "Restarted client load ${!var}: on $client. Checking ..."
1632 check_client_load $client
1634 if [ "$rc" != 0 ]; then
1635 log "Client load failed to restart on node $client, rc=$rc"
1636 # failure one client load means test fail
1637 # we do not need to check other
1646 # Start vmstat and save its process ID in a file.
1651 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1654 "vmstat 1 > $TESTLOG_PREFIX.$TESTNAME.vmstat.\\\$(hostname -s).log \
1655 2>/dev/null </dev/null & echo \\\$! > $pid_file"
1658 # Display the nodes on which client loads failed.
1659 print_end_run_file() {
1663 [ -s $file ] || return 0
1665 echo "Found the END_RUN_FILE file: $file"
1668 # A client load will stop if it finds the END_RUN_FILE file.
1669 # That does not mean the client load actually failed though.
1670 # The first node in END_RUN_FILE is the one we are interested in.
1673 if [ -n "$node" ]; then
1674 local var=$(node_var_name $node)_load
1676 local prefix=$TESTLOG_PREFIX
1677 [ -n "$TESTNAME" ] && prefix=$prefix.$TESTNAME
1678 local stdout_log=$prefix.run_${!var}_stdout.$node.log
1679 local debug_log=$(echo $stdout_log | sed 's/\(.*\)stdout/\1debug/')
1681 echo "Client load ${!var} failed on node $node:"
1687 # Stop the process which had its PID saved in a file.
1692 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1694 do_nodes $nodes "test -f $pid_file &&
1695 { kill -s TERM \\\$(cat $pid_file); rm -f $pid_file; }" || true
1698 # Stop all client loads.
1699 stop_client_loads() {
1700 local nodes=${1:-$CLIENTS}
1703 # stop the client loads
1704 stop_process $nodes $pid_file
1706 # clean up the processes that started them
1707 [ -n "$CLIENT_LOAD_PIDS" ] && kill -9 $CLIENT_LOAD_PIDS 2>/dev/null || true
1709 # End recovery-scale functions
1711 # verify that lustre actually cleaned up properly
1713 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
1714 error "LBUG/LASSERT detected"
1715 BUSY=`dmesg | grep -i destruct || true`
1716 if [ "$BUSY" ]; then
1718 [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.`date +%s`
1722 check_mem_leak || exit 204
1724 [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl &&
1725 echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
1728 if module_loaded lnet || module_loaded libcfs; then
1729 echo "$TESTSUITE: modules still loaded..." 1>&2
1747 RESULT=$(do_node $node "$TEST")
1748 if [ "$RESULT" == "$FINAL" ]; then
1749 [ -z "$RESULT" -o $WAIT -le $sleep ] ||
1750 echo "Updated after ${WAIT}s: wanted '$FINAL' got '$RESULT'"
1753 [ $WAIT -ge $MAX ] && break
1754 [ $((WAIT % print)) -eq 0 ] &&
1755 echo "Waiting $((MAX - WAIT)) secs for update"
1756 WAIT=$((WAIT + sleep))
1759 echo "Update not seen after ${MAX}s: wanted '$FINAL' got '$RESULT'"
1763 wait_update_facet() {
1766 wait_update $(facet_active_host $facet) "$@"
1770 do_node $(osts_nodes) "lctl set_param -n osd*.*OS*.force_sync 1" 2>&1 |
1771 grep -v 'Found no match'
1774 wait_delete_completed_mds() {
1775 local MAX_WAIT=${1:-20}
1777 local stime=`date +%s`
1782 # find MDS with pending deletions
1783 for node in $(mdts_nodes); do
1784 changes=$(do_node $node "lctl get_param -n osc.*MDT*.sync_*" \
1785 2>/dev/null | calc_sum)
1786 if [ -z "$changes" ] || [ $changes -eq 0 ]; then
1789 mds2sync="$mds2sync $node"
1791 if [ "$mds2sync" == "" ]; then
1794 mds2sync=$(comma_list $mds2sync)
1796 # sync MDS transactions
1797 do_nodes $mds2sync "lctl set_param -n osd*.*MD*.force_sync 1"
1799 # wait till all changes are sent and commmitted by OSTs
1800 # for ldiskfs space is released upon execution, but DMU
1801 # do this upon commit
1804 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
1805 changes=$(do_nodes $mds2sync "lctl get_param -n osc.*MDT*.sync_*" \
1807 #echo "$node: $changes changes on all"
1808 if [ "$changes" -eq "0" ]; then
1810 #echo "delete took $((etime - stime)) seconds"
1818 echo "Delete is not completed in $((etime - stime)) seconds"
1819 do_nodes $mds2sync "lctl get_param osc.*MDT*.sync_*"
1825 # we can use "for" here because we are waiting the slowest
1826 for host in ${hostlist//,/ }; do
1827 check_network "$host" 900
1829 while ! do_nodes $hostlist hostname > /dev/null; do sleep 5; done
1836 for facet in ${facetlist//,/ }; do
1837 hostlist=$(expand_list $hostlist $(facet_active_host $facet))
1839 wait_for_host $hostlist
1842 _wait_recovery_complete () {
1845 # Use default policy if $2 is not passed by caller.
1846 local MAX=${2:-$(max_recovery_time)}
1851 while [ $WAIT -lt $MAX ]; do
1852 STATUS=$(lctl get_param -n $param | grep status)
1854 [[ $STATUS = "status: COMPLETE" || $STATUS = "status: INACTIVE" ]] && return 0
1857 echo "Waiting $((MAX - WAIT)) secs for $param recovery done. $STATUS"
1859 echo "$param recovery not done in $MAX sec. $STATUS"
1863 wait_recovery_complete () {
1866 # with an assumption that at_max is the same on all nodes
1867 local MAX=${2:-$(max_recovery_time)}
1870 if [ "$FAILURE_MODE" = HARD ]; then
1871 facets=$(facets_on_host $(facet_active_host $facet))
1873 echo affected facets: $facets
1875 # we can use "for" here because we are waiting the slowest
1876 for facet in ${facets//,/ }; do
1877 local var_svc=${facet}_svc
1878 local param="*.${!var_svc}.recovery_status"
1880 local host=$(facet_active_host $facet)
1881 do_rpc_nodes "$host" _wait_recovery_complete $param $MAX
1885 wait_mds_ost_sync () {
1886 # just because recovery is done doesn't mean we've finished
1887 # orphan cleanup. Wait for llogs to get synchronized.
1888 echo "Waiting for orphan cleanup..."
1889 # MAX value includes time needed for MDS-OST reconnection
1890 local MAX=$(( TIMEOUT * 2 ))
1892 while [ $WAIT -lt $MAX ]; do
1893 local -a sync=($(do_nodes $(comma_list $(osts_nodes)) \
1894 "$LCTL get_param -n obdfilter.*.mds_sync"))
1897 for ((i=0; i<${#sync[@]}; i++)); do
1898 [ ${sync[$i]} -eq 0 ] && continue
1899 # there is a not finished MDS-OST synchronization
1903 sleep 2 # increase waiting time and cover statfs cache
1904 [ ${con} -eq 1 ] && return 0
1905 echo "Waiting $WAIT secs for $facet mds-ost sync done."
1908 echo "$facet recovery not done in $MAX sec. $STATUS"
1912 wait_destroy_complete () {
1913 echo "Waiting for local destroys to complete"
1914 # MAX value shouldn't be big as this mean server responsiveness
1915 # never increase this just to make test pass but investigate
1916 # why it takes so long time
1919 while [ $WAIT -lt $MAX ]; do
1920 local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
1924 for ((i=0; i<${#RPCs[@]}; i++)); do
1925 [ ${RPCs[$i]} -eq 0 ] && continue
1926 # there are still some destroy RPCs in flight
1931 [ ${con} -eq 1 ] && return 0 # done waiting
1932 echo "Waiting ${WAIT}s for local destroys to complete"
1935 echo "Local destroys weren't done in $MAX sec."
1939 wait_delete_completed() {
1940 wait_delete_completed_mds $1 || return $?
1941 wait_destroy_complete
1950 # conf-sanity 31 takes a long time cleanup
1951 while [ $WAIT -lt 300 ]; do
1952 running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
1953 [ -z "${running}" ] && return 0
1954 echo "waited $WAIT for${running}"
1955 [ $INTERVAL -lt 64 ] && INTERVAL=$((INTERVAL + INTERVAL))
1957 WAIT=$((WAIT + INTERVAL))
1959 echo "service didn't stop after $WAIT seconds. Still running:"
1964 wait_remote_prog () {
1970 [ "$PDSH" = "no_dsh" ] && return 0
1972 while [ $WAIT -lt $2 ]; do
1973 running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
1974 [ -z "${running}" ] && return 0 || true
1975 echo "waited $WAIT for: "
1977 [ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
1979 WAIT=$((WAIT + INTERVAL))
1981 local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
1982 [ -z "$pids" ] && return 0
1983 echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
1984 # FIXME: not portable
1985 for pid in $pids; do
1986 cat /proc/${pid}/status || true
1987 cat /proc/${pid}/wchan || true
1989 kill -9 $pid || true
1998 # not every config has many clients
2000 if [ ! -z "$CLIENTS" ]; then
2001 $PDSH $CLIENTS "stat -f $MOUNT" > /dev/null
2003 stat -f $MOUNT > /dev/null
2009 # usually checked on particular client or locally
2011 if [ ! -z "$client" ]; then
2012 $PDSH $client "stat -f $MOUNT" > /dev/null
2014 stat -f $MOUNT > /dev/null
2022 client_reconnect() {
2023 uname -n >> $MOUNT/recon
2024 if [ -z "$CLIENTS" ]; then
2025 df $MOUNT; uname -n >> $MOUNT/recon
2027 do_nodes $CLIENTS "df $MOUNT; uname -n >> $MOUNT/recon" > /dev/null
2029 echo Connected clients:
2031 ls -l $MOUNT/recon > /dev/null
2035 affected_facets () {
2038 local host=$(facet_active_host $facet)
2039 local affected=$facet
2041 if [ "$FAILURE_MODE" = HARD ]; then
2042 affected=$(facets_up_on_host $host)
2056 #Because it will only get up facets, we need get affected
2057 #facets before shutdown
2058 #For HARD Failure mode, it needs make sure facets on the same
2059 #HOST will only be shutdown and reboot once
2060 for facet in ${facets//,/ }; do
2061 local affected_facet
2063 #check whether facet has been included in other affected facets
2064 for ((index=0; index<$total; index++)); do
2065 [[ *,$facet,* == ,${affecteds[index]}, ]] && skip=1
2068 if [ $skip -eq 0 ]; then
2069 affecteds[$total]=$(affected_facets $facet)
2074 for ((index=0; index<$total; index++)); do
2075 facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
2076 local host=$(facet_active_host $facet)
2077 echo "Failing ${affecteds[index]} on $host"
2078 shutdown_facet $facet
2081 for ((index=0; index<$total; index++)); do
2082 facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
2083 echo reboot facets: ${affecteds[index]}
2087 change_active ${affecteds[index]}
2089 wait_for_facet ${affecteds[index]}
2090 # start mgs first if it is affected
2091 if ! combined_mgs_mds &&
2092 list_member ${affecteds[index]} mgs; then
2093 mount_facet mgs || error "Restart of mgs failed"
2095 # FIXME; has to be changed to mount all facets concurrently
2096 affected=$(exclude_items_from_list ${affecteds[index]} mgs)
2097 echo mount facets: ${affecteds[index]}
2098 mount_facets ${affecteds[index]}
2108 do_facet $facet "sync; sync; sync"
2111 # make sure there will be no seq change
2112 local clients=${CLIENTS:-$HOSTNAME}
2113 local f=fsa-\\\$\(hostname\)
2114 do_nodes $clients "mcreate $MOUNT/$f; rm $MOUNT/$f"
2115 do_nodes $clients "if [ -d $MOUNT2 ]; then mcreate $MOUNT2/$f; rm $MOUNT2/$f; fi"
2117 local svc=${facet}_svc
2118 do_facet $facet $LCTL --device %${!svc} notransno
2119 do_facet $facet $LCTL --device %${!svc} readonly
2120 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2121 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2124 replay_barrier_nodf() {
2125 local facet=$1 echo running=${running}
2126 do_facet $facet "sync; sync; sync"
2127 local svc=${facet}_svc
2128 echo Replay barrier on ${!svc}
2129 do_facet $facet $LCTL --device %${!svc} notransno
2130 do_facet $facet $LCTL --device %${!svc} readonly
2131 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2132 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2135 replay_barrier_nosync() {
2136 local facet=$1 echo running=${running}
2137 local svc=${facet}_svc
2138 echo Replay barrier on ${!svc}
2139 do_facet $facet $LCTL --device %${!svc} notransno
2140 do_facet $facet $LCTL --device %${!svc} readonly
2141 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2142 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2145 mds_evict_client() {
2146 UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
2147 do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
2150 ost_evict_client() {
2151 UUID=`lctl get_param -n devices| grep ${ost1_svc}-osc- | egrep -v 'MDT' | awk '{print $5}'`
2152 do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.evict_client $UUID"
2156 facet_failover $* || error "failover: $?"
2157 clients_up || error "post-failover df: $?"
2162 facet_failover $facet
2168 refresh_disk ${facet}
2169 change_active $facet
2170 wait_for_facet $facet
2171 mount_facet $facet -o abort_recovery
2172 clients_up || echo "first df failed: $?"
2173 clients_up || error "post-failover df: $?"
2177 echo There is no lmc. This is mountconf, baby.
2181 host_nids_address() {
2185 if [ -n "$kind" ]; then
2186 nids=$(do_nodes $nodes "$LCTL list_nids | grep $kind | cut -f 1 -d '@'")
2188 nids=$(do_nodes $nodes "$LCTL list_nids all | cut -f 1 -d '@'")
2194 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2200 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2201 ID=`xtprocadmin -n $1 2>/dev/null | egrep -v 'NID' | awk '{print $1}'`
2202 if [ -z "$ID" ]; then
2203 echo "Could not get a ptl id for $1..."
2212 h2name_or_ip "$1" "tcp"
2217 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2218 if type __h2elan >/dev/null 2>&1; then
2221 ID=`echo $1 | sed 's/[^0-9]*//g'`
2229 h2name_or_ip "$1" "o2ib"
2233 # This enables variables in cfg/"setup".sh files to support the pdsh HOSTLIST
2234 # expressions format. As a bonus we can then just pass in those variables
2235 # to pdsh. What this function does is take a HOSTLIST type string and
2236 # expand it into a space deliminated list for us.
2244 [ -z "$hostlist" ] && return
2246 # Translate the case of [..],..,[..] to [..] .. [..]
2247 list="${hostlist/],/] }"
2249 [[ "$front" == *,* ]] && {
2252 list=${list/${old}/${new}}
2255 for item in $list; do
2256 # Test if we have any []'s at all
2257 if [ "$item" != "${item/\[/}" ]; then {
2258 # Expand the [*] into list
2262 if [ "$name" != "$item" ]; then
2263 group=${item#$name[*}
2266 for range in ${group//,/ }; do
2270 # Number of leading zeros
2273 end=$(echo $end | sed 's/0*//')
2274 [[ -z "$end" ]] && end=0
2275 [[ $padlen2 -gt $padlen ]] && {
2276 [[ $padlen2 -eq ${#end} ]] && padlen2=0
2279 begin=$(echo $begin | sed 's/0*//')
2280 [ -z $begin ] && begin=0
2282 for num in $(seq -f "%0${padlen}g" $begin $end); do
2283 value="${name#*,}${num}${back}"
2284 [ "$value" != "${value/\[/}" ] && {
2285 value=$(hostlist_expand "$value")
2287 myList="$myList $value"
2292 myList="$myList $item"
2295 myList=${myList//,/ }
2296 myList=${myList:1} # Remove first character which is a space
2298 # Filter any duplicates without sorting
2300 myList="${list%% *}"
2302 while [[ "$list" != ${myList##* } ]]; do
2303 list=${list//${list%% *} /}
2304 myList="$myList ${list%% *}"
2306 myList="${myList%* }";
2308 # We can select an object at a offset in the list
2311 for item in $myList; do
2313 [ $cnt -eq $offset ] && {
2317 [ $(get_node_count $myList) -ne 1 ] && myList=""
2326 [ "$facet" == client ] && echo -n $HOSTNAME && return
2327 varname=${facet}_HOST
2328 if [ -z "${!varname}" ]; then
2329 if [ "${facet:0:3}" == "ost" ]; then
2330 eval export ${facet}_HOST=${ost_HOST}
2331 elif [ "${facet:0:3}" == "mdt" -o \
2332 "${facet:0:3}" == "mds" -o \
2333 "${facet:0:3}" == "mgs" ]; then
2334 eval export ${facet}_HOST=${mds_HOST}
2340 facet_failover_host() {
2344 var=${facet}failover_HOST
2345 if [ -n "${!var}" ]; then
2350 if [ "${facet:0:3}" == "mdt" -o "${facet:0:3}" == "mds" -o \
2351 "${facet:0:3}" == "mgs" ]; then
2353 eval export ${facet}failover_host=${mds_HOST}
2358 if [[ $facet == ost* ]]; then
2359 eval export ${facet}failover_host=${ost_HOST}
2367 local activevar=${facet}active
2369 if [ -f $TMP/${facet}active ] ; then
2370 source $TMP/${facet}active
2373 active=${!activevar}
2374 if [ -z "$active" ] ; then
2381 facet_active_host() {
2383 local active=`facet_active $facet`
2384 if [ "$facet" == client ]; then
2387 echo `facet_host $active`
2395 facetlist=$(exclude_items_from_list $facetlist mgs)
2397 for facet in ${facetlist//,/ }; do
2398 local failover=${facet}failover
2399 local host=`facet_host $failover`
2400 [ -z "$host" ] && return
2402 local curactive=`facet_active $facet`
2403 if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
2404 eval export ${facet}active=$facet
2406 eval export ${facet}active=$failover
2408 # save the active host for this facet
2409 local activevar=${facet}active
2410 echo "$activevar=${!activevar}" > $TMP/$activevar
2411 [[ $facet = mds1 ]] && combined_mgs_mds && \
2412 echo "mgsactive=${!activevar}" > $TMP/mgsactive
2413 local TO=`facet_active_host $facet`
2414 echo "Failover $facet to $TO"
2420 # do not stripe off hostname if verbose, bug 19215
2421 if [ x$1 = x--verbose ]; then
2429 if [ "$HOST" = "$HOSTNAME" ]; then
2431 elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
2432 echo "cannot run remote command on $HOST with $myPDSH"
2436 echo "CMD: $HOST $@" >&2
2437 $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
2440 if [ "$myPDSH" = "rsh" ]; then
2441 # we need this because rsh does not return exit code of an executed command
2442 local command_status="$TMP/cs"
2443 rsh $HOST ":> $command_status"
2444 rsh $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin;
2445 cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\") ||
2446 echo command failed >$command_status"
2447 [ -n "$($myPDSH $HOST cat $command_status)" ] && return 1 || true
2452 # print HOSTNAME for myPDSH="no_dsh"
2453 if [[ $myPDSH = no_dsh ]]; then
2454 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed -e "s/^/${HOSTNAME}: /"
2456 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")"
2459 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed "s/^${HOST}: //"
2461 return ${PIPESTATUS[0]}
2465 do_node --verbose "$@"
2468 single_local_node () {
2469 [ "$1" = "$HOSTNAME" ]
2472 # Outputs environment variable assignments that should be passed to remote nodes
2476 local facets=$(get_facets)
2479 for var in ${!MODOPTS_*}; do
2481 echo -n " ${var}=\"$value\""
2484 echo -n " USE_OFD=$USE_OFD"
2486 for facet in ${facets//,/ }; do
2488 if [ -n "${!var}" ]; then
2489 echo -n " $var=${!var}"
2493 for var in MGSFSTYPE MDSFSTYPE OSTFSTYPE; do
2494 if [ -n "${!var}" ]; then
2495 echo -n " $var=${!var}"
2499 if [ -n "$FSTYPE" ]; then
2500 echo -n " FSTYPE=$FSTYPE"
2506 # do not stripe off hostname if verbose, bug 19215
2507 if [ x$1 = x--verbose ]; then
2515 if single_local_node $rnodes; then
2517 do_nodev $rnodes "$@"
2519 do_node $rnodes "$@"
2524 # This is part from do_node
2527 [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
2528 echo "cannot run remote command on $rnodes with $myPDSH" && return 128
2530 export FANOUT=$(get_node_count "${rnodes//,/ }")
2532 echo "CMD: $rnodes $@" >&2
2533 $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
2536 # do not replace anything from pdsh output if -N is used
2537 # -N Disable hostname: prefix on lines of output.
2538 if $verbose || [[ $myPDSH = *-N* ]]; then
2539 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")"
2541 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")" | sed -re "s/^[^:]*: //g"
2543 return ${PIPESTATUS[0]}
2549 local HOST=`facet_active_host $facet`
2550 [ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
2554 # Function: do_facet_random_file $FACET $FILE $SIZE
2555 # Creates FILE with random content on the given FACET of given SIZE
2557 do_facet_random_file() {
2561 local cmd="dd if=/dev/urandom of='$fpath' bs=$fsize count=1"
2562 do_facet $facet "$cmd 2>/dev/null"
2565 do_facet_create_file() {
2569 local cmd="dd if=/dev/zero of='$fpath' bs=$fsize count=1"
2570 do_facet $facet "$cmd 2>/dev/null"
2574 do_nodes --verbose "$@"
2580 # make sure its not already running
2582 rm -f $TMP/${facet}active
2583 [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
2584 do_facet ${facet} $MKFS $*
2591 local fstype=$(facet_fstype ost$num)
2595 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
2596 eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
2598 #dataset name is independent of vdev device names
2599 eval DEVPTR=${FSNAME}-ost${num}/ost${num};;
2601 error "unknown fstype!";;
2611 local fstype=$(facet_fstype ost$num)
2615 # vdevs are not supported by ldiskfs
2618 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
2619 eval VDEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
2621 error "unknown fstype!";;
2631 local fstype=$(facet_fstype mds$num)
2635 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
2636 eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
2638 #dataset name is independent of vdev device names
2639 eval DEVPTR=${FSNAME}-mdt${num}/mdt${num};;
2641 error "unknown fstype!";;
2651 local fstype=$(facet_fstype mds$num)
2655 # vdevs are not supported by ldiskfs
2658 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
2659 eval VDEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
2661 error "unknown fstype!";;
2668 local DEVNAME=MGSDEV
2669 local MDSDEV1=$(mdsdevname 1)
2671 local fstype=$(facet_fstype mds1)
2675 #if $MGSDEV isn't defined, default is $MDSDEV1
2676 eval DEVPTR=${!DEVNAME:=${MDSDEV1}};;
2678 #dataset name is independent of vdev device names
2679 eval DEVPTR=${FSNAME}-mgs/mgs;;
2681 error "unknown fstype!";;
2690 local fstype=$(facet_fstype mds1)
2694 # vdevs are not supported by ldiskfs
2697 #if $MGSDEV isn't defined, default is $MGSDEV1
2698 eval VDEVPTR=${!DEVNAME:=${MDSDEV1}};;
2700 error "unknown fstype!";;
2708 [[ $facet = mgs ]] && combined_mgs_mds && facet="mds1"
2710 local var=${facet}_MOUNT
2711 eval mntpt=${!var:-${MOUNT%/*}/$facet}
2720 # make sure we are using the primary server, so test-framework will
2721 # be able to clean up properly.
2722 activemds=`facet_active mds1`
2723 if [ $activemds != "mds1" ]; then
2727 local clients=$CLIENTS
2728 [ -z $clients ] && clients=$(hostname)
2730 zconf_umount_clients $clients $MOUNT "$*" || true
2731 [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
2733 [ "$CLIENTONLY" ] && return
2734 # The add fn does rm ${facet}active file, this would be enough
2735 # if we use do_facet <facet> only after the facet added, but
2736 # currently we use do_facet mds in local.sh
2737 for num in `seq $MDSCOUNT`; do
2739 rm -f ${TMP}/mds${num}active
2741 combined_mgs_mds && rm -f $TMP/mgsactive
2743 for num in `seq $OSTCOUNT`; do
2745 rm -f $TMP/ost${num}active
2748 if ! combined_mgs_mds ; then
2755 cleanup_echo_devs () {
2756 local devs=$($LCTL dl | grep echo | awk '{print $4}')
2758 for dev in $devs; do
2759 $LCTL --device $dev cleanup
2760 $LCTL --device $dev detach
2765 nfs_client_mode && return
2774 combined_mgs_mds () {
2775 [[ "$(mdsdevname 1)" = "$(mgsdevname)" ]] &&
2776 [[ "$(facet_host mds1)" = "$(facet_host mgs)" ]]
2780 echo -n "$1" | tr '[:upper:]' '[:lower:]'
2784 echo -n "$1" | tr '[:lower:]' '[:upper:]'
2790 local type=$(facet_type $facet)
2791 local index=$(($(facet_number $facet) - 1))
2792 local fstype=$(facet_fstype $facet)
2793 local host=$(facet_host $facet)
2798 if [ $type == MGS ] && combined_mgs_mds; then
2802 if [ $type == MGS ] || ( [ $type == MDS ] &&
2803 [ "$dev" == $(mgsdevname) ] &&
2804 [ "$host" == "$(facet_host mgs)" ] ); then
2807 opts="--mgsnode=$MGSNID"
2810 if [ $type != MGS ]; then
2811 opts+=" --fsname=$FSNAME --$(lower ${type/MDS/MDT}) --index=$index"
2814 var=${facet}failover_HOST
2815 if [ -n "${!var}" ] && [ ${!var} != $(facet_host $facet) ]; then
2816 opts+=" --failnode=$(h2$NETTYPE ${!var})"
2819 opts+=${TIMEOUT:+" --param=sys.timeout=$TIMEOUT"}
2820 opts+=${LDLM_TIMEOUT:+" --param=sys.ldlm_timeout=$LDLM_TIMEOUT"}
2822 if [ $type == MDS ]; then
2823 opts+=${SECLEVEL:+" --param=mdt.sec_level"}
2824 opts+=${MDSCAPA:+" --param-mdt.capa=$MDSCAPA"}
2825 opts+=${STRIPE_BYTES:+" --param=lov.stripesize=$STRIPE_BYTES"}
2826 opts+=${STRIPES_PER_OBJ:+" --param=lov.stripecount=$STRIPES_PER_OBJ"}
2827 opts+=${L_GETIDENTITY:+" --param=mdt.identity_upcall=$L_GETIDENTITY"}
2829 if [ $fstype == ldiskfs ]; then
2830 fs_mkfs_opts+=${MDSJOURNALSIZE:+" -J size=$MDSJOURNALSIZE"}
2831 fs_mkfs_opts+=${MDSISIZE:+" -i $MDSISIZE"}
2835 if [ $type == OST ]; then
2836 opts+=${SECLEVEL:+" --param=ost.sec_level"}
2837 opts+=${OSSCAPA:+" --param=ost.capa=$OSSCAPA"}
2839 if [ $fstype == ldiskfs ]; then
2840 fs_mkfs_opts+=${OSTJOURNALSIZE:+" -J size=$OSTJOURNALSIZE"}
2844 opts+=" --backfstype=$fstype"
2847 if [ -n "${!var}" ]; then
2848 opts+=" --device-size=${!var}"
2851 var=$(upper $fstype)_MKFS_OPTS
2852 fs_mkfs_opts+=${!var:+" ${!var}"}
2854 var=${type}_FS_MKFS_OPTS
2855 fs_mkfs_opts+=${!var:+" ${!var}"}
2857 if [ -n "${fs_mkfs_opts## }" ]; then
2858 opts+=" --mkfsoptions=\\\"${fs_mkfs_opts## }\\\""
2862 opts+=${!var:+" ${!var}"}
2875 # We need ldiskfs here, may as well load them all
2877 [ "$CLIENTONLY" ] && return
2878 echo Formatting mgs, mds, osts
2879 if ! combined_mgs_mds ; then
2880 echo "Format mgs: $(mgsdevname)"
2881 add mgs $(mkfs_opts mgs $(mgsdevname)) --reformat \
2882 $(mgsdevname) $(mgsvdevname) ${quiet:+>/dev/null} || exit 10
2885 for num in $(seq $MDSCOUNT); do
2886 echo "Format mds$num: $(mdsdevname $num)"
2887 add mds$num $(mkfs_opts mds$num $(mdsdevname ${num})) \
2888 --reformat $(mdsdevname $num) $(mdsvdevname $num) \
2889 ${quiet:+>/dev/null} || exit 10
2892 for num in $(seq $OSTCOUNT); do
2893 echo "Format ost$num: $(ostdevname $num)"
2894 add ost$num $(mkfs_opts ost$num $(ostdevname ${num})) \
2895 --reformat $(ostdevname $num) $(ostvdevname ${num}) \
2896 ${quiet:+>/dev/null} || exit 10
2901 grep " $1 " /proc/mounts || zconf_mount $HOSTNAME $*
2905 grep " $1 " /proc/mounts && zconf_umount `hostname` $*
2909 # 0: success, the old identity set already.
2910 # 1: success, the old identity does not set.
2915 local j=`expr $num - 1`
2916 local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
2918 if [ -z "$MDT" ]; then
2922 local old="`do_facet mds$num "lctl get_param -n mdt.$MDT.identity_upcall"`"
2925 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"$L_GETIDENTITY\""
2927 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"NONE\""
2930 do_facet mds$num "lctl set_param -n mdt/$MDT/identity_flush=-1"
2932 if [ $old = "NONE" ]; then
2941 zconf_umount `hostname` $1 || error "umount failed"
2942 zconf_mount `hostname` $1 || error "mount failed"
2945 writeconf_facet () {
2949 do_facet $facet "$TUNEFS --writeconf $dev"
2953 for num in `seq $MDSCOUNT`; do
2954 DEVNAME=$(mdsdevname $num)
2955 writeconf_facet mds$num $DEVNAME
2958 for num in `seq $OSTCOUNT`; do
2959 DEVNAME=$(ostdevname $num)
2960 writeconf_facet ost$num $DEVNAME
2965 nfs_client_mode && return
2967 sanity_mount_check ||
2968 error "environments are insane!"
2972 if [ -z "$CLIENTONLY" ]; then
2973 echo Setup mgs, mdt, osts
2974 echo $WRITECONF | grep -q "writeconf" && \
2976 if ! combined_mgs_mds ; then
2977 start mgs $(mgsdevname) $MGS_MOUNT_OPTS
2980 for num in `seq $MDSCOUNT`; do
2981 DEVNAME=$(mdsdevname $num)
2982 start mds$num $DEVNAME $MDS_MOUNT_OPTS
2984 # We started mds, now we should set failover variables properly.
2985 # Set mds${num}failover_HOST if it is not set (the default failnode).
2986 local varname=mds${num}failover_HOST
2987 if [ -z "${!varname}" ]; then
2988 eval mds${num}failover_HOST=$(facet_host mds$num)
2991 if [ $IDENTITY_UPCALL != "default" ]; then
2992 switch_identity $num $IDENTITY_UPCALL
2995 for num in `seq $OSTCOUNT`; do
2996 DEVNAME=$(ostdevname $num)
2997 start ost$num $DEVNAME $OST_MOUNT_OPTS
2999 # We started ost$num, now we should set ost${num}failover variable properly.
3000 # Set ost${num}failover_HOST if it is not set (the default failnode).
3001 varname=ost${num}failover_HOST
3002 if [ -z "${!varname}" ]; then
3003 eval ost${num}failover_HOST=$(facet_host ost${num})
3011 # wait a while to allow sptlrpc configuration be propogated to targets,
3012 # only needed when mounting new target devices.
3017 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
3019 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
3022 if [ "$MOUNT_2" ]; then
3023 mount_client $MOUNT2
3024 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
3029 # by remounting mdt before ost, initial connect from mdt to ost might
3030 # timeout because ost is not ready yet. wait some time to its fully
3031 # recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
3032 # by a context negotiation rpc with $TIMEOUT.
3033 # FIXME better by monitoring import status.
3036 sleep $((TIMEOUT + 5))
3042 mounted_lustre_filesystems() {
3043 awk '($3 ~ "lustre" && $1 ~ ":") { print $2 }' /proc/mounts
3046 init_facet_vars () {
3047 [ "$CLIENTONLY" ] && return 0
3054 eval export ${facet}_dev=${device}
3055 eval export ${facet}_opt=\"$@\"
3057 local dev=${facet}_dev
3059 # We need to loop for the label
3060 # in case its not initialized yet.
3061 for wait_time in {0,1,3,5,10}; do
3063 if [ $wait_time -gt 0 ]; then
3064 echo "${!dev} not yet initialized,"\
3065 "waiting ${wait_time} seconds."
3069 local label=$(devicelabel ${facet} ${!dev})
3071 # Check to make sure the label does
3072 # not include ffff at the end of the label.
3073 # This indicates it has not been initialized yet.
3075 if [[ $label =~ [f|F]{4}$ ]]; then
3076 # label is not initialized, unset the result
3077 # and either try again or fail
3084 [ -z "$label" ] && echo no label for ${!dev} && exit 1
3086 eval export ${facet}_svc=${label}
3088 local varname=${facet}failover_HOST
3089 if [ -z "${!varname}" ]; then
3090 eval export $varname=$(facet_host $facet)
3093 varname=${facet}_HOST
3094 if [ -z "${!varname}" ]; then
3095 eval export $varname=$(facet_host $facet)
3098 # ${facet}failover_dev is set in cfg file
3099 varname=${facet}failover_dev
3100 if [ -n "${!varname}" ] ; then
3101 eval export ${facet}failover_dev=${!varname}
3103 eval export ${facet}failover_dev=$device
3106 # get mount point of already mounted device
3107 # is facet_dev is already mounted then use the real
3108 # mount point of this facet; otherwise use $(facet_mntpt $facet)
3109 # i.e. ${facet}_MOUNT if specified by user or default
3110 local mntpt=$(do_facet ${facet} cat /proc/mounts | \
3111 awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
3112 if [ -z $mntpt ]; then
3113 mntpt=$(facet_mntpt $facet)
3115 eval export ${facet}_MOUNT=$mntpt
3118 init_facets_vars () {
3121 if ! remote_mds_nodsh; then
3122 for num in $(seq $MDSCOUNT); do
3123 DEVNAME=`mdsdevname $num`
3124 eval export MDSDEV${num}=$DEVNAME
3125 init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
3129 eval export MGSDEV=$(mgsdevname)
3130 combined_mgs_mds || init_facet_vars mgs $(mgsdevname) $MGS_MOUNT_OPTS
3132 if ! remote_ost_nodsh; then
3133 for num in $(seq $OSTCOUNT); do
3134 DEVNAME=$(ostdevname $num)
3135 eval export OSTDEV${num}=$DEVNAME
3136 init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
3141 osc_ensure_active () {
3146 while [ $period -lt $timeout ]; do
3147 count=$(do_facet $facet "lctl dl | grep ' IN osc ' 2>/dev/null | wc -l")
3148 if [ $count -eq 0 ]; then
3152 echo "There are $count OST are inactive, wait $period seconds, and try again"
3154 period=$((period+3))
3157 [ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
3160 set_conf_param_and_check() {
3164 local ORIG=$(do_facet $myfacet "$TEST")
3165 if [ $# -gt 3 ]; then
3171 echo "Setting $PARAM from $ORIG to $FINAL"
3172 do_facet mgs "$LCTL conf_param $PARAM='$FINAL'" ||
3173 error "conf_param $PARAM failed"
3175 wait_update $(facet_host $myfacet) "$TEST" "$FINAL" ||
3176 error "check $PARAM failed!"
3179 init_param_vars () {
3181 TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
3183 log "Using TIMEOUT=$TIMEOUT"
3185 osc_ensure_active $SINGLEMDS $TIMEOUT
3186 osc_ensure_active client $TIMEOUT
3189 if [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ]; then
3191 elif [ $JOBSTATS_AUTO -ne 0 ]; then
3192 echo "enable jobstats, set job scheduler as $JOBID_VAR"
3193 jobid_var=$JOBID_VAR
3195 jobid_var=`$LCTL get_param -n jobid_var`
3196 if [ $jobid_var != "disable" ]; then
3197 echo "disable jobstats as required"
3204 if [ $jobid_var == $JOBID_VAR -o $jobid_var == "disable" ]; then
3205 do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$jobid_var
3206 wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
3207 $jobid_var || return 1
3210 if [ $QUOTA_AUTO -ne 0 ]; then
3211 if [ "$ENABLE_QUOTA" ]; then
3212 echo "enable quota as required"
3213 setup_quota $MOUNT || return 2
3215 echo "disable quota as required"
3216 # $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
3222 nfs_client_mode () {
3223 if [ "$NFSCLIENT" ]; then
3224 echo "NFSCLIENT mode: setup, cleanup, check config skipped"
3225 local clients=$CLIENTS
3226 [ -z $clients ] && clients=$(hostname)
3228 # FIXME: remove hostname when 19215 fixed
3229 do_nodes $clients "echo \\\$(hostname); grep ' '$MOUNT' ' /proc/mounts"
3230 declare -a nfsexport=(`grep ' '$MOUNT' ' /proc/mounts | awk '{print $1}' | awk -F: '{print $1 " " $2}'`)
3231 if [[ ${#nfsexport[@]} -eq 0 ]]; then
3232 error_exit NFSCLIENT=$NFSCLIENT mode, but no NFS export found!
3234 do_nodes ${nfsexport[0]} "echo \\\$(hostname); df -T ${nfsexport[1]}"
3240 check_config_client () {
3243 local mounted=$(mount | grep " $mntpt ")
3244 if [ "$CLIENTONLY" ]; then
3246 # CLIENTONLY should not depend on *_HOST settings
3247 local mgc=$($LCTL device_list | awk '/MGC/ {print $4}')
3248 # in theory someone could create a new,
3249 # client-only config file that assumed lustre was already
3250 # configured and didn't set the MGSNID. If MGSNID is not set,
3251 # then we should use the mgs nid currently being used
3252 # as the default value. bug 18021
3253 [[ x$MGSNID = x ]] &&
3256 if [[ x$mgc != xMGC$MGSNID ]]; then
3257 if [ "$mgs_HOST" ]; then
3258 local mgc_ip=$(ping -q -c1 -w1 $mgs_HOST | grep PING | awk '{print $3}' | sed -e "s/(//g" -e "s/)//g")
3259 # [[ x$mgc = xMGC$mgc_ip@$NETTYPE ]] ||
3260 # error_exit "MGSNID=$MGSNID, mounted: $mounted, MGC : $mgc"
3266 local myMGS_host=$mgs_HOST
3267 if [ "$NETTYPE" = "ptl" ]; then
3268 myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
3271 echo Checking config lustre mounted on $mntpt
3272 local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
3273 mgshost=$(echo $mgshost | awk -F: '{print $1}')
3275 # if [ "$mgshost" != "$myMGS_host" ]; then
3276 # log "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
3277 # Please use correct config or set mds_HOST correctly!"
3282 check_config_clients () {
3283 local clients=${CLIENTS:-$HOSTNAME}
3286 nfs_client_mode && return
3288 do_rpc_nodes "$clients" check_config_client $mntpt
3290 sanity_mount_check || error "environments are insane!"
3294 local mdstimeout=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
3295 local cltimeout=$(lctl get_param -n timeout)
3296 if [ $mdstimeout -ne $TIMEOUT ] || [ $mdstimeout -ne $cltimeout ]; then
3297 error "timeouts are wrong! mds: $mdstimeout, client: $cltimeout, TIMEOUT=$TIMEOUT"
3304 [ -z $mntpt ] && return 1
3305 local mounted=$(mounted_lustre_filesystems)
3307 echo $mounted' ' | grep -w -q $mntpt' '
3311 [ $(find $1 -maxdepth 1 -print | wc -l) = 1 ] && return 0
3315 # empty lustre filesystem may have empty directories lost+found and .lustre
3317 [ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
3318 -print | wc -l) = 1 ] || return 1
3319 [ ! -d $1/lost+found ] || is_empty_dir $1/lost+found && return 0
3320 [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre && return 0
3324 check_and_setup_lustre() {
3325 nfs_client_mode && return
3327 local MOUNTED=$(mounted_lustre_filesystems)
3331 # both MOUNT and MOUNT2 are not mounted
3332 if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
3333 [ "$REFORMAT" ] && formatall
3334 # setupall mounts both MOUNT and MOUNT2 (if MOUNT_2 is set)
3336 is_mounted $MOUNT || error "NAME=$NAME not mounted"
3337 export I_MOUNTED=yes
3341 elif is_mounted $MOUNT2; then
3343 # MOUNT2 is mounted, while MOUNT_2 is not set
3344 if ! [ "$MOUNT_2" ]; then
3345 cleanup_mount $MOUNT2
3346 export I_UMOUNTED2=yes
3349 # MOUNT2 is mounted, MOUNT_2 is set
3351 # FIXME: what to do if check_config failed?
3353 # 1) remote client has mounted other Lustre fs ?
3354 # 2) it has insane env ?
3355 # let's try umount MOUNT2 on all clients and mount it again:
3356 if ! check_config_clients $MOUNT2; then
3357 cleanup_mount $MOUNT2
3358 restore_mount $MOUNT2
3359 export I_MOUNTED2=yes
3364 # MOUNT is mounted MOUNT2 is not mounted
3365 elif [ "$MOUNT_2" ]; then
3366 restore_mount $MOUNT2
3367 export I_MOUNTED2=yes
3371 # FIXME: what to do if check_config failed?
3373 # 1) remote client has mounted other Lustre fs?
3374 # 2) lustre is mounted on remote_clients atall ?
3375 check_config_clients $MOUNT
3379 set_default_debug_nodes $(comma_list $(nodes_list))
3387 if [ "$ONLY" == "setup" ]; then
3393 local clients=${CLIENTS:-$HOSTNAME}
3396 zconf_mount_clients $clients $mntpt
3400 local clients=${CLIENTS:-$HOSTNAME}
3403 zconf_umount_clients $clients $mntpt
3406 cleanup_and_setup_lustre() {
3407 if [ "$ONLY" == "cleanup" -o "`mount | grep $MOUNT`" ]; then
3408 lctl set_param debug=0 || true
3410 if [ "$ONLY" == "cleanup" ]; then
3414 check_and_setup_lustre
3417 # Get all of the server target devices from a given server node and type.
3424 if [ "$type" == ost ]; then
3425 devs=$(get_obdfilter_param $node "" mntdev)
3427 devs=$(do_node $node \
3428 "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
3430 for dev in $devs; do
3432 *loop*) do_node $node "losetup $dev" | \
3433 sed -e "s/.*(//" -e "s/).*//" ;;
3439 # Get all of the server target devices.
3444 MDTDEV=$(get_mnt_devs $(mdts_nodes) mdt)
3448 for node in $(osts_nodes); do
3449 OSTDEVS[i]=$(get_mnt_devs $node ost)
3454 # Run e2fsck on MDT or OST device.
3460 df > /dev/null # update statfs data on disk
3461 local cmd="$E2FSCK -d -v -t -t -f $extra_opts $target_dev"
3464 do_node $node $cmd || rc=$?
3465 [ $rc -le $FSCK_MAX_ERR ] || \
3466 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
3470 # verify a directory is shared among nodes.
3471 check_shared_dir() {
3474 [ -z "$dir" ] && return 1
3475 do_rpc_nodes "$(comma_list $(nodes_list))" check_logdir $dir
3476 check_write_access $dir || return 1
3480 # Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
3486 [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
3487 { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
3489 check_shared_dir $SHARED_DIRECTORY ||
3490 error "$SHARED_DIRECTORY isn't a shared directory"
3492 export MDSDB=$SHARED_DIRECTORY/mdsdb
3493 export OSTDB=$SHARED_DIRECTORY/ostdb
3495 [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
3497 run_e2fsck $(mdts_nodes) $MDTDEV "-n --mdsdb $MDSDB"
3502 for node in $(osts_nodes); do
3503 for dev in ${OSTDEVS[i]}; do
3504 run_e2fsck $node $dev "-n --mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
3505 OSTDB_LIST="$OSTDB_LIST $OSTDB-$ostidx"
3506 ostidx=$((ostidx + 1))
3513 local cmd="$LFSCK_BIN -c -l --mdsdb $MDSDB --ostdb $OSTDB_LIST $MOUNT"
3517 [ $rc -le $FSCK_MAX_ERR ] || \
3518 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
3519 echo "lfsck finished with rc=$rc"
3521 rm -rvf $MDSDB* $OSTDB* || true
3525 check_and_cleanup_lustre() {
3526 if [ "$LFSCK_ALWAYS" = "yes" -a "$TESTSUITE" != "lfsck" ]; then
3532 if is_mounted $MOUNT; then
3533 [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
3534 error "remove sub-test dirs failed"
3535 [ "$ENABLE_QUOTA" ] && restore_quota || true
3538 if [ "$I_UMOUNTED2" = "yes" ]; then
3539 restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
3542 if [ "$I_MOUNTED2" = "yes" ]; then
3543 cleanup_mount $MOUNT2
3546 if [ "$I_MOUNTED" = "yes" ]; then
3547 cleanupall -f || error "cleanup failed"
3555 wait_for_function () {
3558 # suppress fn both stderr and stdout
3559 if [ "$1" = "--quiet" ]; then
3561 quiet=" > /dev/null 2>&1"
3573 eval $fn $quiet && return 0
3575 wait=$((wait + sleep))
3576 [ $wait -lt $max ] || return 1
3577 echo waiting $fn, $((max - wait)) secs left ...
3587 echo `date +"%H:%M:%S (%s)"` waiting for $host network $max secs ...
3588 if ! wait_for_function --quiet "ping -c 1 -w 3 $host" $max $sleep ; then
3589 echo "Network not available!"
3593 echo `date +"%H:%M:%S (%s)"` network interface is UP
3601 # Convert a space-delimited list to a comma-delimited list. If the input is
3602 # only whitespace, ensure the output is empty (i.e. "") so [ -n $list ] works
3604 # echo is used to convert newlines to spaces, since it doesn't
3605 # introduce a trailing space as using "tr '\n' ' '" does
3606 echo $(tr -s " " "\n" <<< $* | sort -b -u) | tr ' ' ','
3612 echo $list | grep -qw $item
3615 # list, excluded are the comma separated lists
3616 exclude_items_from_list () {
3622 for item in ${excluded//,/ }; do
3623 list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
3625 echo $(comma_list $list)
3628 # list, expand are the comma separated lists
3630 local list=${1//,/ }
3631 local expand=${2//,/ }
3634 expanded=$(for i in $list $expand; do echo $i; done | sort -u)
3635 echo $(comma_list $expanded)
3638 testslist_filter () {
3639 local script=$LUSTRE/tests/${TESTSUITE}.sh
3641 [ -f $script ] || return 0
3643 local start_at=$START_AT
3644 local stop_at=$STOP_AT
3646 local var=${TESTSUITE//-/_}_START_AT
3647 [ x"${!var}" != x ] && start_at=${!var}
3648 var=${TESTSUITE//-/_}_STOP_AT
3649 [ x"${!var}" != x ] && stop_at=${!var}
3651 sed -n 's/^test_\([^ (]*\).*/\1/p' $script | \
3652 awk ' BEGIN { if ("'${start_at:-0}'" != 0) flag = 1 }
3653 /^'${start_at}'$/ {flag = 0}
3654 {if (flag == 1) print $0}
3655 /^'${stop_at}'$/ { flag = 1 }'
3659 (cd `dirname $1`; echo $PWD/`basename $1`)
3663 local types=${1:-"OST MDS MGS"}
3667 for entry in $types; do
3668 local name=$(echo $entry | tr "[:upper:]" "[:lower:]")
3669 local type=$(echo $entry | tr "[:lower:]" "[:upper:]")
3672 MGS ) list="$list $name";;
3673 MDS|OST ) local count=${type}COUNT
3674 for ((i=1; i<=${!count}; i++)) do
3675 list="$list ${name}$i"
3677 * ) error "Invalid facet type"
3681 echo $(comma_list $list)
3684 ##################################
3685 # Adaptive Timeouts funcs
3688 # only check mds, we assume at_max is the same on all nodes
3689 local at_max=$(do_facet $SINGLEMDS "lctl get_param -n at_max")
3690 if [ $at_max -eq 0 ]; then
3701 # suppose that all ost-s have the same $at value set
3702 [ $facet != "ost" ] || facet=ost1
3704 do_facet $facet "lctl get_param -n $at"
3722 if [ $facet == "ost" ]; then
3723 facet=$(get_facets OST)
3724 elif [ $facet == "mds" ]; then
3725 facet=$(get_facets MDS)
3727 hosts=$(expand_list $hosts $(facets_hosts $facet))
3730 do_nodes $hosts lctl set_param at_max=$at_max
3733 ##################################
3737 # OBD_FAIL_MDS_ALL_REQUEST_NET
3739 do_facet $SINGLEMDS lctl set_param fail_loc=0x123
3740 do_facet client "$1" || RC=$?
3741 do_facet $SINGLEMDS lctl set_param fail_loc=0
3746 # OBD_FAIL_MDS_ALL_REPLY_NET
3748 do_facet $SINGLEMDS lctl set_param fail_loc=0x122
3749 do_facet client "$@" || RC=$?
3750 do_facet $SINGLEMDS lctl set_param fail_loc=0
3754 drop_reint_reply() {
3755 # OBD_FAIL_MDS_REINT_NET_REP
3757 do_facet $SINGLEMDS lctl set_param fail_loc=0x119
3758 do_facet client "$@" || RC=$?
3759 do_facet $SINGLEMDS lctl set_param fail_loc=0
3764 #define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
3766 do_facet ost1 lctl set_param fail_loc=0x214
3767 do_facet client "$1" || RC=$?
3768 do_facet client "sync"
3769 do_facet ost1 lctl set_param fail_loc=0
3773 drop_ldlm_cancel() {
3774 #define OBD_FAIL_LDLM_CANCEL_NET 0x304
3776 local list=$(comma_list $(mdts_nodes) $(osts_nodes))
3777 do_nodes $list lctl set_param fail_loc=0x304
3779 do_facet client "$@" || RC=$?
3781 do_nodes $list lctl set_param fail_loc=0
3785 drop_bl_callback() {
3786 #define OBD_FAIL_LDLM_BL_CALLBACK_NET 0x305
3788 do_facet client lctl set_param fail_loc=0x80000305
3789 do_facet client "$@" || RC=$?
3790 do_facet client lctl set_param fail_loc=0
3795 #define OBD_FAIL_LDLM_REPLY 0x30c
3797 do_facet $SINGLEMDS lctl set_param fail_loc=0x30c
3798 do_facet client "$@" || RC=$?
3799 do_facet $SINGLEMDS lctl set_param fail_loc=0
3807 echo "clearing fail_loc on $facet"
3808 do_facet $facet "lctl set_param fail_loc=0 2>/dev/null || true"
3811 set_nodes_failloc () {
3812 do_nodes $(comma_list $1) lctl set_param fail_loc=$2
3815 cancel_lru_locks() {
3816 $LCTL mark "cancel_lru_locks $1 start"
3817 for d in `lctl get_param -N ldlm.namespaces.*.lru_size | egrep -i $1`; do
3818 $LCTL set_param -n $d=clear
3820 $LCTL get_param ldlm.namespaces.*.lock_unused_count | egrep -i $1 | grep -v '=0'
3821 $LCTL mark "cancel_lru_locks $1 stop"
3826 NR_CPU=$(grep -c "processor" /proc/cpuinfo)
3827 DEFAULT_LRU_SIZE=$((100 * NR_CPU))
3828 echo "$DEFAULT_LRU_SIZE"
3833 lctl set_param ldlm.namespaces.*$1*.lru_size=0
3836 lru_resize_disable()
3838 lctl set_param ldlm.namespaces.*$1*.lru_size $(default_lru_size)
3843 for FILE in `lctl get_param -N "llite.*.dump_page_cache"`; do
3844 if [ `lctl get_param -n $FILE | wc -l` -gt 1 ]; then
3845 echo there is still data in page cache $FILE ?
3846 lctl get_param -n $FILE
3854 DEBUGSAVE="$(lctl get_param -n debug)"
3858 [ -n "$DEBUGSAVE" ] && \
3859 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=\\\"${DEBUGSAVE}\\\";"
3864 DEBUG_SIZE_SAVED="$(lctl get_param -n debug_mb)"
3867 debug_size_restore() {
3868 [ -n "$DEBUG_SIZE_SAVED" ] && \
3869 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE_SAVED"
3873 start_full_debug_logging() {
3878 local DEBUG_SIZE=150
3880 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE"
3881 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=$FULLDEBUG;"
3884 stop_full_debug_logging() {
3889 # prints bash call stack
3892 for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
3893 local s=${BASH_SOURCE[$i]}
3894 local l=${BASH_LINENO[$i-1]}
3895 local f=${FUNCNAME[$i]}
3896 echo " = $s:$l:$f()"
3900 ##################################
3902 ##################################
3905 local TYPE=${TYPE:-"FAIL"}
3908 # do not dump logs if $1=false
3909 if [ "x$1" = "xfalse" ]; then
3914 log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
3918 # We need to dump the logs on all nodes
3920 gather_logs $(comma_list $(nodes_list))
3924 [ "$TESTSUITELOG" ] &&
3925 echo "$TESTSUITE: $TYPE: $TESTNAME $@" >> $TESTSUITELOG
3926 echo "$@" > $LOGDIR/err
3931 local log=$TESTSUITELOG
3933 [ -f "$log" ] && grep -q FAIL $log && status=1
3946 # use only if we are ignoring failures for this test, bugno required.
3947 # (like ALWAYS_EXCEPT, but run the test and ignore the results.)
3948 # e.g. error_ignore 5494 "your message"
3950 local TYPE="IGNORE (bz$1)"
3955 error_and_remount() {
3957 remount_client $MOUNT
3962 $FAIL_ON_SKIP_ENV && error false $@ || skip $@
3967 log " SKIP: $TESTSUITE $TESTNAME $@"
3969 if [[ -n "$ALWAYS_SKIPPED" ]]; then
3970 skip_logged $TESTNAME "$@"
3973 echo "$@" > $LOGDIR/skip
3976 [[ -n "$TESTSUITELOG" ]] &&
3977 echo "$TESTSUITE: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
3980 build_test_filter() {
3981 EXCEPT="$EXCEPT $(testslist_filter)"
3983 [ "$ONLY" ] && log "only running test `echo $ONLY`"
3987 [ "$EXCEPT$ALWAYS_EXCEPT" ] && \
3988 log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
3989 [ "$EXCEPT_SLOW" ] && \
3990 log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
3991 for E in $EXCEPT; do
3992 eval EXCEPT_${E}=true
3994 for E in $ALWAYS_EXCEPT; do
3995 eval EXCEPT_ALWAYS_${E}=true
3997 for E in $EXCEPT_SLOW; do
3998 eval EXCEPT_SLOW_${E}=true
4000 for G in $GRANT_CHECK_LIST; do
4001 eval GCHECK_ONLY_${G}=true
4006 if [[ $1 = [a-z]* ]]; then
4013 # print a newline if the last test was skipped
4014 export LAST_SKIPPED=
4015 export ALWAYS_SKIPPED=
4017 # Main entry into test-framework. This is called with the name and
4018 # description of a test. The name is used to find the function to run
4019 # the test using "test_$name".
4021 # This supports a variety of methods of specifying specific test to
4022 # run or not run. These need to be documented...
4027 export base=`basetest $1`
4028 if [ ! -z "$ONLY" ]; then
4030 if [ ${!testname}x != x ]; then
4031 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
4032 run_one_logged $1 "$2"
4036 if [ ${!testname}x != x ]; then
4037 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
4038 run_one_logged $1 "$2"
4049 if [ ${!testname}x != x ]; then
4050 TESTNAME=test_$1 skip "skipping excluded test $1"
4053 testname=EXCEPT_$base
4054 if [ ${!testname}x != x ]; then
4055 TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
4058 testname=EXCEPT_ALWAYS_$1
4059 if [ ${!testname}x != x ]; then
4060 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
4063 testname=EXCEPT_ALWAYS_$base
4064 if [ ${!testname}x != x ]; then
4065 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
4068 testname=EXCEPT_SLOW_$1
4069 if [ ${!testname}x != x ]; then
4070 TESTNAME=test_$1 skip "skipping SLOW test $1"
4073 testname=EXCEPT_SLOW_$base
4074 if [ ${!testname}x != x ]; then
4075 TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
4081 run_one_logged $1 "$2"
4088 module_loaded lnet || load_modules
4100 do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
4105 strace -o $TMP/$1.strace -ttt $*
4107 log "FINISHED: $*: rc $RC"
4114 banner test complete, duration $duration sec
4115 [ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
4116 echo duration $duration >>$TESTSUITELOG
4120 # Set TEST_STATUS here. It will be used for logging the result.
4123 if [[ -f $LOGDIR/err ]]; then
4125 elif [[ -f $LOGDIR/skip ]]; then
4128 echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
4132 local FFREE=$(do_node $SINGLEMDS \
4133 lctl get_param -n osd*.*MDT*.filesfree | calc_sum)
4134 local FTOTAL=$(do_node $SINGLEMDS \
4135 lctl get_param -n osd*.*MDT*.filestotal | calc_sum)
4137 [ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
4141 echo -n "Resetting fail_loc on all nodes..."
4142 do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 2>/dev/null || true"
4148 # Log a message (on all nodes) padded with "=" before and after.
4149 # Also appends a timestamp and prepends the testsuite name.
4152 EQUALS="===================================================================================================="
4154 msg="== ${TESTSUITE} $*"
4156 [[ $last != "=" && $last != " " ]] && msg="$msg "
4157 msg=$(printf '%s%.*s' "$msg" $((${#EQUALS} - ${#msg})) $EQUALS )
4158 # always include at least == after the message
4159 log "$msg== $(date +"%H:%M:%S (%s)")"
4163 # Run a single test function and cleanup after it.
4165 # This function should be run in a subshell so the test func can
4166 # exit() without stopping the whole script.
4171 tfile=f.${TESTSUITE}.${testnum}
4172 export tdir=d0.${TESTSUITE}/d${base}
4173 export TESTNAME=test_$testnum
4174 local SAVE_UMASK=`umask`
4177 banner "test $testnum: $message"
4178 test_${testnum} || error "test_$testnum failed with $?"
4181 check_grant ${testnum} || error "check_grant $testnum failed with $?"
4182 check_catastrophe || error "LBUG/LASSERT detected"
4183 ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
4191 # Wrapper around run_one to ensure:
4192 # - test runs in subshell
4193 # - output of test is saved to separate log file for error reporting
4194 # - test result is saved to data file
4197 local BEFORE=`date +%s`
4199 local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
4200 local test_log=$LOGDIR/$name
4203 local SAVE_UMASK=`umask`
4207 log_sub_test_begin test_${1}
4208 (run_one $1 "$2") 2>&1 | tee -i $test_log
4209 local RC=${PIPESTATUS[0]}
4211 [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
4212 echo "test_$1 returned $RC" | tee $LOGDIR/err
4214 duration=$((`date +%s` - $BEFORE))
4215 pass "$1" "(${duration}s)"
4217 if [[ -f $LOGDIR/err ]]; then
4218 TEST_ERROR=$(cat $LOGDIR/err)
4219 elif [[ -f $LOGDIR/skip ]]; then
4220 TEST_ERROR=$(cat $LOGDIR/skip)
4222 log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
4224 if [ -f $LOGDIR/err ]; then
4225 $FAIL_ON_ERROR && exit $RC
4234 # Print information of skipped tests to result.yml
4237 log_sub_test_begin $1
4239 log_sub_test_end "SKIP" "0" "0" "$@"
4243 (cd `dirname $1`; echo $PWD/`basename $1`)
4248 export base=`basetest $1`
4249 [ "$CHECK_GRANT" == "no" ] && return 0
4251 testname=GCHECK_ONLY_${base}
4252 [ ${!testname}x == x ] && return 0
4254 echo -n "checking grant......"
4256 local clients=$CLIENTS
4257 [ -z $clients ] && clients=$(hostname)
4259 # sync all the data and make sure no pending data on server
4260 do_nodes $clients sync
4263 client_grant=`do_nodes $clients \
4264 "$LCTL get_param -n osc.${FSNAME}-*.cur_*grant_bytes" | \
4265 awk '{total += $1} END{print total}'`
4268 server_grant=`do_nodes $(comma_list $(osts_nodes)) \
4269 "$LCTL get_param -n obdfilter.${FSNAME}-OST*.tot_granted" |
4270 awk '{total += $1} END{print total}'`
4272 # check whether client grant == server grant
4273 if [ $client_grant -ne $server_grant ]; then
4274 echo "failed: client:${client_grant} server: ${server_grant}."
4275 do_nodes $(comma_list $(osts_nodes)) \
4276 "$LCTL get_param obdfilter.${FSNAME}-OST*.tot*"
4277 do_nodes $clients "$LCTL get_param osc.${FSNAME}-*.cur_*_bytes"
4280 echo "pass: client:${client_grant} server: ${server_grant}"
4285 ########################
4291 ost=`echo $1 | awk -F_ '{print $3}'`
4292 if [ -z $ost ]; then
4293 ost=`echo $1 | sed 's/-osc.*//'`
4298 ostuuid_from_index()
4300 $LFS osts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
4303 ostname_from_index() {
4304 local uuid=$(ostuuid_from_index $1)
4308 index_from_ostuuid()
4310 $LFS osts $2 | sed -ne "/${1}/s/\(.*\): .* .*$/\1/p"
4313 mdtuuid_from_index()
4315 $LFS mdts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
4320 [ "$node" != "$(hostname)" ]
4326 for node in $(mdts_nodes); do
4327 remote_node $node && return 0
4334 [ "$CLIENTONLY" ] && return 0 || true
4335 remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
4340 remote_mds_nodsh && echo "SKIP: $TESTSUITE: remote MDS with nodsh" && \
4341 MSKIPPED=1 && return 1
4348 for node in $(osts_nodes) ; do
4349 remote_node $node && return 0
4356 [ "$CLIENTONLY" ] && return 0 || true
4357 remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
4362 remote_ost_nodsh && echo "SKIP: $TESTSUITE: remote OST with nodsh" && \
4363 OSKIPPED=1 && return 1
4370 MGS=$(facet_host mgs)
4371 remote_node $MGS && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
4376 remote_mds_nodsh || remote_ost_nodsh || \
4377 $(single_local_node $(comma_list $(nodes_list)))
4383 for num in `seq $MDSCOUNT`; do
4384 MDSNODES="$MDSNODES $(facet_host mds$num)"
4386 NODES_sort=$(for i in $MDSNODES; do echo $i; done | sort -u)
4392 remote_ost && remote_mds
4400 for facet in ${facets//,/ }; do
4401 if [ "$FAILURE_MODE" = HARD ]; then
4402 nodes="$nodes $(facet_active_host $facet)"
4404 nodes="$nodes $(facet_host $facet)"
4407 NODES_sort=$(for i in $nodes; do echo $i; done | sort -u)
4413 local facets=$(get_facets OST)
4414 local nodes=$(facets_nodes $facets)
4420 # FIXME. We need a list of clients
4421 local myNODES=$HOSTNAME
4424 # CLIENTS (if specified) contains the local client
4425 [ -n "$CLIENTS" ] && myNODES=${CLIENTS//,/ }
4427 if [ "$PDSH" -a "$PDSH" != "no_dsh" ]; then
4428 myNODES="$myNODES $(facets_nodes $(get_facets))"
4431 myNODES_sort=$(for i in $myNODES; do echo $i; done | sort -u)
4436 remote_nodes_list () {
4437 echo $(nodes_list) | sed -re "s/\<$HOSTNAME\>//g"
4440 init_clients_lists () {
4441 # Sanity check: exclude the local client from RCLIENTS
4442 local clients=$(hostlist_expand "$RCLIENTS")
4443 local rclients=$(exclude_items_from_list "$clients" $HOSTNAME)
4445 # Sanity check: exclude the dup entries
4446 RCLIENTS=$(for i in ${rclients//,/ }; do echo $i; done | sort -u)
4448 clients="$SINGLECLIENT $HOSTNAME $RCLIENTS"
4450 # Sanity check: exclude the dup entries from CLIENTS
4451 # for those configs which has SINGLCLIENT set to local client
4452 clients=$(for i in $clients; do echo $i; done | sort -u)
4454 CLIENTS=$(comma_list $clients)
4455 local -a remoteclients=($RCLIENTS)
4456 for ((i=0; $i<${#remoteclients[@]}; i++)); do
4457 varname=CLIENT$((i + 2))
4458 eval $varname=${remoteclients[i]}
4461 CLIENTCOUNT=$((${#remoteclients[@]} + 1))
4464 get_random_entry () {
4467 rnodes=${rnodes//,/ }
4469 local -a nodes=($rnodes)
4470 local num=${#nodes[@]}
4471 local i=$((RANDOM * num * 2 / 65536))
4477 [ "$CLIENTONLY" ] || [ "$CLIENTMODSONLY" = yes ]
4482 lctl get_param version | grep -q patchless
4486 [ "$(lustre_version_code client)" = "$(lustre_version_code $SINGLEMDS)" -a \
4487 "$(lustre_version_code client)" = "$(lustre_version_code ost1)" ]
4492 echo $nodes | wc -w || true
4496 local nodes=$(osts_nodes)
4497 local osscount=$(get_node_count "$nodes")
4498 [ ! "$OSTCOUNT" = "$osscount" ]
4502 local nodes=$(mdts_nodes)
4503 local mdtcount=$(get_node_count "$nodes")
4504 [ ! "$MDSCOUNT" = "$mdtcount" ]
4507 generate_machine_file() {
4508 local nodes=${1//,/ }
4509 local machinefile=$2
4511 for node in $nodes; do
4512 echo $node >>$machinefile || \
4513 { echo "can not generate machinefile $machinefile" && return 1; }
4518 local file=$1/stripe
4520 $LFS getstripe -v $file || error
4524 setstripe_nfsserver () {
4527 local nfsserver=$(awk '"'$dir'" ~ $2 && $3 ~ "nfs" && $2 != "/" \
4528 { print $1 }' /proc/mounts | cut -f 1 -d : | head -1)
4530 [ -z $nfsserver ] && echo "$dir is not nfs mounted" && return 1
4532 do_nodev $nfsserver lfs setstripe "$@"
4535 # Check and add a test group.
4541 local gid=$(getent group $group_name | cut -d: -f3)
4542 if [[ -n "$gid" ]]; then
4543 [[ "$gid" -eq "$group_id" ]] || {
4544 error_noexit "inconsistent group ID:" \
4545 "new: $group_id, old: $gid"
4549 groupadd -g $group_id $group_name
4556 # Check and add a test user.
4569 local uid=$(getent passwd $user_name | cut -d: -f3)
4570 if [[ -n "$uid" ]]; then
4571 if [[ "$uid" -eq "$user_id" ]]; then
4572 local dir=$(getent passwd $user_name | cut -d: -f6)
4573 if [[ "$dir" != "$home" ]]; then
4575 usermod -d $home $user_name
4579 error_noexit "inconsistent user ID:" \
4580 "new: $user_id, old: $uid"
4585 useradd -M -u $user_id -d $home -g $group_name $opts $user_name
4592 check_runas_id_ret() {
4594 local myRUNAS_UID=$1
4595 local myRUNAS_GID=$2
4598 if [ -z "$myRUNAS" ]; then
4599 error_exit "myRUNAS command must be specified for check_runas_id"
4602 $myRUNAS krb5_login.sh || \
4603 error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
4605 mkdir $DIR/d0_runas_test
4607 chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
4608 $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
4609 rm -rf $DIR/d0_runas_test
4614 local myRUNAS_UID=$1
4615 local myRUNAS_GID=$2
4618 check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
4619 error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
4620 Please set RUNAS_ID to some UID which exists on MDS and client or
4621 add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
4624 # obtain the UID/GID for MPI_USER
4628 MPI_USER_UID=$(do_facet client "getent passwd $mpi_user | cut -d: -f3;
4629 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the UID for $mpi_user"
4631 MPI_USER_GID=$(do_facet client "getent passwd $mpi_user | cut -d: -f4;
4632 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the GID for $mpi_user"
4635 # obtain and cache Kerberos ticket-granting ticket
4636 refresh_krb5_tgt() {
4637 local myRUNAS_UID=$1
4638 local myRUNAS_GID=$2
4641 if [ -z "$myRUNAS" ]; then
4642 error_exit "myRUNAS command must be specified for refresh_krb5_tgt"
4645 CLIENTS=${CLIENTS:-$HOSTNAME}
4646 do_nodes $CLIENTS "set -x
4647 if ! $myRUNAS krb5_login.sh; then
4648 echo "Failed to refresh Krb5 TGT for UID/GID $myRUNAS_UID/$myRUNAS_GID."
4653 # Run multiop in the background, but wait for it to print
4654 # "PAUSING" to its stdout before returning from this function.
4655 multiop_bg_pause() {
4656 MULTIOP_PROG=${MULTIOP_PROG:-$MULTIOP}
4660 TMPPIPE=/tmp/multiop_open_wait_pipe.$$
4663 echo "$MULTIOP_PROG $FILE v$ARGS"
4664 $MULTIOP_PROG $FILE v$ARGS > $TMPPIPE &
4666 echo "TMPPIPE=${TMPPIPE}"
4667 read -t 60 multiop_output < $TMPPIPE
4668 if [ $? -ne 0 ]; then
4673 if [ "$multiop_output" != "PAUSING" ]; then
4674 echo "Incorrect multiop output: $multiop_output"
4689 [ ${PIPESTATUS[0]} -eq 0 ] || rc=1
4695 inodes_available () {
4696 local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
4700 mdsrate_inodes_available () {
4701 local min_inodes=$(inodes_available)
4702 echo $((min_inodes * 99 / 100))
4705 # reset llite stat counters
4706 clear_llite_stats(){
4707 lctl set_param -n llite.*.stats 0
4710 # sum llite stat items
4711 calc_llite_stats() {
4712 local res=$(lctl get_param -n llite.*.stats |
4713 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
4717 # reset osc stat counters
4719 lctl set_param -n osc.*.osc_stats 0
4722 # sum osc stat items
4724 local res=$(lctl get_param -n osc.*.osc_stats |
4725 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
4730 awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
4733 calc_osc_kbytes () {
4734 df $MOUNT > /dev/null
4735 $LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
4738 # save_lustre_params(node, parameter_mask)
4739 # generate a stream of formatted strings (<node> <param name>=<param value>)
4740 save_lustre_params() {
4742 do_nodesv $1 "lctl get_param $2 | while read s; do echo \\\$s; done"
4745 # restore lustre parameters from input stream, produces by save_lustre_params
4746 restore_lustre_params() {
4750 while IFS=" =" read node name val; do
4751 do_node ${node//:/} "lctl set_param -n $name $val"
4755 check_catastrophe() {
4756 local rnodes=${1:-$(comma_list $(remote_nodes_list))}
4757 local C=$CATASTROPHE
4758 [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
4760 [ -z "$rnodes" ] && return 0
4762 do_nodes "$rnodes" "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
4763 if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
4767 # CMD: determine mds index where directory inode presents
4770 local file=$dir/f0.get_mds_dir_tmpfile
4775 local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
4776 local -a oldused=($iused)
4778 openfile -f O_CREAT:O_LOV_DELAY_CREATE -m 0644 $file > /dev/null
4780 iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
4781 local -a newused=($iused)
4784 for ((i=0; i<${#newused[@]}; i++)); do
4785 if [ ${oldused[$i]} -lt ${newused[$i]} ]; then
4791 error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
4794 mdsrate_cleanup () {
4796 mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
4801 delayed_recovery_enabled () {
4802 local var=${SINGLEMDS}_svc
4803 do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
4806 ########################
4808 convert_facet2label() {
4811 if [ x$facet = xost ]; then
4815 local varsvc=${facet}_svc
4817 if [ -n ${!varsvc} ]; then
4820 error "No lablel for $facet!"
4824 get_clientosc_proc_path() {
4825 echo "${1}-osc-[^M]*"
4828 get_lustre_version () {
4829 local facet=${1:-"$SINGLEMDS"}
4830 do_facet $facet $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
4833 lustre_version_code() {
4834 local facet=${1:-"$SINGLEMDS"}
4835 version_code $(get_lustre_version $1)
4838 # If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
4839 # used by MDT would not be changed.
4840 # mdt lov: fsname-mdtlov
4841 # mdt osc: fsname-OSTXXXX-osc
4842 mds_on_old_device() {
4843 local mds=${1:-"$SINGLEMDS"}
4845 if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
4846 do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
4847 > /dev/null 2>&1" && return 0
4852 get_mdtosc_proc_path() {
4854 local ost_label=${2:-"*OST*"}
4856 [ "$mds_facet" = "mds" ] && mds_facet=$SINGLEMDS
4857 local mdt_label=$(convert_facet2label $mds_facet)
4858 local mdt_index=$(echo $mdt_label | sed -e 's/^.*-//')
4860 if [ $(lustre_version_code $mds_facet) -le $(version_code 1.8.0) ] ||
4861 mds_on_old_device $mds_facet; then
4862 echo "${ost_label}-osc"
4864 echo "${ost_label}-osc-${mdt_index}"
4868 get_osc_import_name() {
4871 local label=$(convert_facet2label $ost)
4873 if [ "${facet:0:3}" = "mds" ]; then
4874 get_mdtosc_proc_path $facet $label
4878 get_clientosc_proc_path $label
4882 _wait_import_state () {
4885 local maxtime=${3:-$(max_recovery_time)}
4889 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4890 while [ "${CONN_STATE}" != "${expected}" ]; do
4891 if [ "${expected}" == "DISCONN" ]; then
4892 # for disconn we can check after proc entry is removed
4893 [ "x${CONN_STATE}" == "x" ] && return 0
4894 # with AT enabled, we can have connect request timeout near of
4895 # reconnect timeout and test can't see real disconnect
4896 [ "${CONN_STATE}" == "CONNECTING" ] && return 0
4898 [ $i -ge $maxtime ] && \
4899 error "can't put import for $CONN_PROC into ${expected} state after $i sec, have ${CONN_STATE}" && \
4902 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4906 log "$CONN_PROC in ${CONN_STATE} state after $i sec"
4910 wait_import_state() {
4913 local maxtime=${3:-$(max_recovery_time)}
4916 for param in ${params//,/ }; do
4917 _wait_import_state $state $param $maxtime || return
4921 # One client request could be timed out because server was not ready
4922 # when request was sent by client.
4923 # The request timeout calculation details :
4925 # /* We give the server rq_timeout secs to process the req, and
4926 # add the network latency for our local timeout. */
4927 # request->rq_deadline = request->rq_sent + request->rq_timeout +
4928 # ptlrpc_at_get_net_latency(request) ;
4930 # ptlrpc_connect_import ()
4931 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
4934 # -> at_init(&at->iat_net_latency, 0, 0) -> iat_net_latency=0
4935 # ptlrpc_at_get_net_latency(request) ->
4936 # at_get (max (iat_net_latency=0, at_min)) = at_min
4939 # request->rq_timeout + ptlrpc_at_get_net_latency(request) =
4940 # INITIAL_CONNECT_TIMEOUT + at_min
4942 # We will use obd_timeout instead of INITIAL_CONNECT_TIMEOUT
4943 # because we can not get this value in runtime,
4944 # the value depends on configure options, and it is not stored in /proc.
4946 # #define CONNECTION_SWITCH_MIN 5U
4947 # #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
4949 request_timeout () {
4952 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
4953 local init_connect_timeout=$TIMEOUT
4954 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
4956 local at_min=$(at_get $facet at_min)
4958 echo $(( init_connect_timeout + at_min ))
4961 wait_osc_import_state() {
4965 local ost=$(get_osc_import_name $facet $ost_facet)
4967 local param="osc.${ost}.ost_server_uuid"
4969 # 1. wait the deadline of client 1st request (it could be skipped)
4970 # 2. wait the deadline of client 2nd request
4971 local maxtime=$(( 2 * $(request_timeout $facet)))
4973 if ! do_rpc_nodes "$(facet_host $facet)" \
4974 _wait_import_state $expected $param $maxtime; then
4975 error "import is not in ${expected} state"
4982 get_clientmdc_proc_path() {
4990 [ -z "$list" ] && return 0
4992 # Add paths to lustre tests for 32 and 64 bit systems.
4993 local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
4994 do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
4997 wait_clients_import_state () {
5004 if [ "$FAILURE_MODE" = HARD ]; then
5005 facets=$(facets_on_host $(facet_active_host $facet))
5008 for facet in ${facets//,/ }; do
5009 local label=$(convert_facet2label $facet)
5012 ost* ) proc_path="osc.$(get_clientosc_proc_path $label).ost_server_uuid" ;;
5013 mds* ) proc_path="mdc.$(get_clientmdc_proc_path $label).mds_server_uuid" ;;
5014 *) error "unknown facet!" ;;
5016 local params=$(expand_list $params $proc_path)
5019 if ! do_rpc_nodes "$list" wait_import_state $expected $params; then
5020 error "import is not in ${expected} state"
5030 AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
5031 $LCTL get_param obdfilter.*.kbytesavail))
5032 GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
5033 $LCTL get_param -n obdfilter.*.tot_granted))
5034 TOTALA=($(do_nodes $(comma_list $(osts_nodes)) \
5035 $LCTL get_param -n obdfilter.*.kbytestotal))
5036 for ((i=0; i<${#AVAILA[@]}; i++)); do
5037 local -a AVAIL1=(${AVAILA[$i]//=/ })
5038 local -a TOTAL=(${TOTALA[$i]//=/ })
5039 GRANT=$((${GRANTA[$i]}/1024))
5040 # allow 1% of total space in bavail because of delayed
5041 # allocation with ZFS which might release some free space after
5042 # txg commit. For small devices, we set a mininum of 8MB
5043 local LIMIT=$((${TOTAL} / 100 + 8000))
5044 echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} \
5045 grnt=$GRANT diff=$((AVAIL1[1] - GRANT)) limit=${LIMIT}
5046 [ $((AVAIL1[1] - GRANT)) -lt $LIMIT ] && OSCFULL=0 && \
5047 echo " FULL" || echo
5053 do_facet mgs lctl pool_list $1
5057 local fsname=${1%%.*}
5058 local poolname=${1##$fsname.}
5060 do_facet mgs lctl pool_new $1
5062 # get param should return err unless pool is created
5063 [[ $RC -ne 0 ]] && return $RC
5065 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
5066 2>/dev/null || echo foo" "" || RC=1
5067 if [[ $RC -eq 0 ]]; then
5070 error "pool_new failed $1"
5075 add_pool_to_list () {
5076 local fsname=${1%%.*}
5077 local poolname=${1##$fsname.}
5079 local listvar=${fsname}_CREATED_POOLS
5080 eval export ${listvar}=$(expand_list ${!listvar} $poolname)
5083 remove_pool_from_list () {
5084 local fsname=${1%%.*}
5085 local poolname=${1##$fsname.}
5087 local listvar=${fsname}_CREATED_POOLS
5088 eval export ${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
5091 destroy_pool_int() {
5093 local OSTS=$(do_facet $SINGLEMDS lctl pool_list $1 | \
5094 awk '$1 !~ /^Pool:/ {print $1}')
5095 for ost in $OSTS; do
5096 do_facet mgs lctl pool_remove $1 $ost
5098 do_facet mgs lctl pool_destroy $1
5101 # <fsname>.<poolname> or <poolname>
5103 local fsname=${1%%.*}
5104 local poolname=${1##$fsname.}
5106 [[ x$fsname = x$poolname ]] && fsname=$FSNAME
5110 pool_list $fsname.$poolname || return $?
5112 destroy_pool_int $fsname.$poolname
5114 [[ $RC -ne 0 ]] && return $RC
5116 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
5117 2>/dev/null || echo foo" "foo" || RC=1
5119 if [[ $RC -eq 0 ]]; then
5120 remove_pool_from_list $fsname.$poolname
5122 error "destroy pool failed $1"
5128 local fsname=${1:-$FSNAME}
5130 local listvar=${fsname}_CREATED_POOLS
5134 [ x${!listvar} = x ] && return 0
5136 echo destroy the created pools: ${!listvar}
5137 for poolname in ${!listvar//,/ }; do
5138 destroy_pool $fsname.$poolname
5143 local fsname=${1:-$FSNAME}
5145 destroy_pools $fsname
5151 local ts=$(date +%s)
5154 if [[ ! -f "$YAML_LOG" ]]; then
5155 # init_logging is not performed before gather_logs,
5156 # so the $LOGDIR needs to be checked here
5157 check_shared_dir $LOGDIR && touch $LOGDIR/shared
5160 [ -f $LOGDIR/shared ] && docp=false
5162 # dump lustre logs, dmesg
5164 prefix="$TESTLOG_PREFIX.$TESTNAME"
5166 echo "Dumping lctl log to ${prefix}.*.${suffix}"
5168 if [ "$CLIENTONLY" -o "$PDSH" == "no_dsh" ]; then
5169 echo "Dumping logs only on local client."
5170 $LCTL dk > ${prefix}.debug_log.$(hostname -s).${suffix}
5171 dmesg > ${prefix}.dmesg.$(hostname -s).${suffix}
5176 "$LCTL dk > ${prefix}.debug_log.\\\$(hostname -s).${suffix};
5177 dmesg > ${prefix}.dmesg.\\\$(hostname -s).${suffix}"
5178 if [ ! -f $LOGDIR/shared ]; then
5179 do_nodes $list rsync -az "${prefix}.*.${suffix}" $HOSTNAME:$LOGDIR
5192 for i in $(seq 0 $num_mntpts); do
5193 cmd="ls -laf ${mntpt_root}$i/$dir"
5199 for pid in $pids; do
5206 # target_start_and_reset_recovery_timer()
5207 # service_time = at_est2timeout(service_time);
5208 # service_time += 2 * (CONNECTION_SWITCH_MAX + CONNECTION_SWITCH_INC +
5209 # INITIAL_CONNECT_TIMEOUT);
5210 # CONNECTION_SWITCH_MAX : min(25U, max(CONNECTION_SWITCH_MIN,obd_timeout))
5211 #define CONNECTION_SWITCH_INC 1
5212 #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
5213 #define CONNECTION_SWITCH_MIN 5U
5215 max_recovery_time () {
5216 local init_connect_timeout=$(( TIMEOUT / 20 ))
5217 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
5219 local service_time=$(( $(at_max_get client) + $(( 2 * $(( 25 + 1 + init_connect_timeout)) )) ))
5224 get_clients_mount_count () {
5225 local clients=${CLIENTS:-`hostname`}
5227 # we need to take into account the clients mounts and
5228 # exclude mds/ost mounts if any;
5229 do_nodes $clients cat /proc/mounts | grep lustre | grep $MOUNT | wc -l
5233 PROC_CLI="srpc_info"
5241 if [ $M -lt $N ]; then
5245 while [ $N -lt $M ]; do
5255 calc_connection_cnt() {
5258 # MDT->MDT = 2 * C(M, 2)
5262 comb_m2=$(combination $MDSCOUNT 2)
5264 local num_clients=$(get_clients_mount_count)
5266 local cnt_mdt2mdt=$((comb_m2 * 2))
5267 local cnt_mdt2ost=$((MDSCOUNT * OSTCOUNT))
5268 local cnt_cli2ost=$((num_clients * OSTCOUNT))
5269 local cnt_cli2mdt=$((num_clients * MDSCOUNT))
5270 local cnt_all2ost=$((cnt_mdt2ost + cnt_cli2ost))
5271 local cnt_all2mdt=$((cnt_mdt2mdt + cnt_cli2mdt))
5272 local cnt_all2all=$((cnt_mdt2ost + cnt_mdt2mdt + cnt_cli2ost + cnt_cli2mdt))
5286 local cmd="$tgt.srpc.flavor"
5288 if [ $net == "any" ]; then
5293 if [ $dir != "any" ]; then
5298 log "Setting sptlrpc rule: $cmd"
5299 do_facet mgs "$LCTL conf_param $cmd"
5308 rpc_flvr=`echo $flavor | awk -F - '{ print $1 }'`
5309 bulkspec=`echo $flavor | awk -F - '{ print $2 }'`
5311 count=`echo "$output" | grep "rpc flavor" | grep $rpc_flvr | wc -l`
5313 if [ "x$bulkspec" != "x" ]; then
5314 algs=`echo $bulkspec | awk -F : '{ print $2 }'`
5316 if [ "x$algs" != "x" ]; then
5317 bulk_count=`echo "$output" | grep "bulk flavor" | grep $algs | wc -l`
5319 bulk=`echo $bulkspec | awk -F : '{ print $1 }'`
5320 if [ $bulk == "bulkn" ]; then
5321 bulk_count=`echo "$output" | grep "bulk flavor" \
5322 | grep "null/null" | wc -l`
5323 elif [ $bulk == "bulki" ]; then
5324 bulk_count=`echo "$output" | grep "bulk flavor" \
5325 | grep "/null" | grep -v "null/" | wc -l`
5327 bulk_count=`echo "$output" | grep "bulk flavor" \
5328 | grep -v "/null" | grep -v "null/" | wc -l`
5332 [ $bulk_count -lt $count ] && count=$bulk_count
5343 local clients=${CLIENTS:-`hostname`}
5345 for c in ${clients//,/ }; do
5346 output=`do_node $c lctl get_param -n mdc.*-MDT*-mdc-*.$PROC_CLI 2>/dev/null`
5347 tmpcnt=`count_flvr "$output" $flavor`
5348 cnt=$((cnt + tmpcnt))
5358 local clients=${CLIENTS:-`hostname`}
5360 for c in ${clients//,/ }; do
5361 output=`do_node $c lctl get_param -n osc.*OST*-osc-[^M][^D][^T]*.$PROC_CLI 2>/dev/null`
5362 tmpcnt=`count_flvr "$output" $flavor`
5363 cnt=$((cnt + tmpcnt))
5373 if [ $MDSCOUNT -le 1 ]; then
5378 for num in `seq $MDSCOUNT`; do
5379 output=`do_facet mds$num lctl get_param -n mdc.*-MDT*-mdc[0-9]*.$PROC_CLI 2>/dev/null`
5380 tmpcnt=`count_flvr "$output" $flavor`
5381 cnt=$((cnt + tmpcnt))
5392 for num in `seq $MDSCOUNT`; do
5393 mdtosc=$(get_mdtosc_proc_path mds$num)
5394 mdtosc=${mdtosc/-MDT*/-MDT\*}
5395 output=$(do_facet mds$num lctl get_param -n \
5396 osc.$mdtosc.$PROC_CLI 2>/dev/null)
5397 tmpcnt=`count_flvr "$output" $flavor`
5398 cnt=$((cnt + tmpcnt))
5407 output=`do_facet client lctl get_param -n mgc.*.$PROC_CLI 2>/dev/null`
5408 count_flvr "$output" $flavor
5413 local dir=$1 # from to
5414 local flavor=$2 # flavor expected
5417 if [ $dir == "cli2mdt" ]; then
5418 res=`flvr_cnt_cli2mdt $flavor`
5419 elif [ $dir == "cli2ost" ]; then
5420 res=`flvr_cnt_cli2ost $flavor`
5421 elif [ $dir == "mdt2mdt" ]; then
5422 res=`flvr_cnt_mdt2mdt $flavor`
5423 elif [ $dir == "mdt2ost" ]; then
5424 res=`flvr_cnt_mdt2ost $flavor`
5425 elif [ $dir == "all2ost" ]; then
5426 res1=`flvr_cnt_mdt2ost $flavor`
5427 res2=`flvr_cnt_cli2ost $flavor`
5428 res=$((res1 + res2))
5429 elif [ $dir == "all2mdt" ]; then
5430 res1=`flvr_cnt_mdt2mdt $flavor`
5431 res2=`flvr_cnt_cli2mdt $flavor`
5432 res=$((res1 + res2))
5433 elif [ $dir == "all2all" ]; then
5434 res1=`flvr_cnt_mdt2ost $flavor`
5435 res2=`flvr_cnt_cli2ost $flavor`
5436 res3=`flvr_cnt_mdt2mdt $flavor`
5437 res4=`flvr_cnt_cli2mdt $flavor`
5438 res=$((res1 + res2 + res3 + res4))
5446 local dir=$1 # from to
5447 local flavor=$2 # flavor expected
5448 local expect=${3:-$(calc_connection_cnt $dir)} # number expected
5452 for ((i=0;i<20;i++)); do
5453 echo -n "checking $dir..."
5454 res=$(do_check_flavor $dir $flavor)
5455 echo "found $res/$expect $flavor connections"
5456 [ $res -ge $expect ] && return 0
5460 echo "Error checking $flavor of $dir: expect $expect, actual $res"
5464 restore_to_default_flavor()
5466 local proc="mgs.MGS.live.$FSNAME"
5468 echo "restoring to default flavor..."
5470 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
5472 # remove all existing rules if any
5473 if [ $nrule -ne 0 ]; then
5474 echo "$nrule existing rules"
5475 for rule in `do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor."`; do
5476 echo "remove rule: $rule"
5477 spec=`echo $rule | awk -F = '{print $1}'`
5478 do_facet mgs "$LCTL conf_param -d $spec"
5482 # verify no rules left
5483 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
5484 [ $nrule -ne 0 ] && error "still $nrule rules left"
5486 # wait for default flavor to be applied
5487 # currently default flavor for all connections are 'null'
5488 wait_flavor all2all null
5489 echo "now at default flavor settings"
5494 local flavor=${1:-null}
5496 echo "setting all flavor to $flavor"
5498 # FIXME need parameter to this fn
5499 # and remove global vars
5500 local cnt_all2all=$(calc_connection_cnt all2all)
5502 local res=$(do_check_flavor all2all $flavor)
5503 if [ $res -eq $cnt_all2all ]; then
5504 echo "already have total $res $flavor connections"
5508 echo "found $res $flavor out of total $cnt_all2all connections"
5509 restore_to_default_flavor
5511 [[ $flavor = null ]] && return 0
5513 set_rule $FSNAME any any $flavor
5514 wait_flavor all2all $flavor
5520 # Checking for shared logdir
5521 if [ ! -d $dir ]; then
5522 # Not found. Create local logdir
5525 touch $dir/check_file.$(hostname -s)
5530 check_write_access() {
5535 for node in $(nodes_list); do
5536 file=$dir/check_file.$(short_hostname $node)
5537 if [[ ! -f "$file" ]]; then
5538 # Logdir not accessible/writable from this node.
5541 rm -f $file || return 1
5547 if [[ -n $YAML_LOG ]]; then
5550 local SAVE_UMASK=`umask`
5553 export YAML_LOG=${LOGDIR}/results.yml
5557 if [ ! -f $YAML_LOG ]; then # If the yaml log already exists then we will just append to it
5558 if check_shared_dir $LOGDIR; then
5559 touch $LOGDIR/shared
5560 echo "Logging to shared log directory: $LOGDIR"
5562 echo "Logging to local directory: $LOGDIR"
5565 yml_nodes_file $LOGDIR >> $YAML_LOG
5566 yml_results_file >> $YAML_LOG
5573 yml_log_test $1 >> $YAML_LOG
5577 yml_log_test_status $@ >> $YAML_LOG
5580 log_sub_test_begin() {
5581 yml_log_sub_test_begin "$@" >> $YAML_LOG
5584 log_sub_test_end() {
5585 yml_log_sub_test_end "$@" >> $YAML_LOG
5591 local llverdev_opts=$2
5592 local devname=$(basename $1)
5593 local size=$(grep "$devname"$ /proc/partitions | awk '{print $3}')
5594 # loop devices aren't in /proc/partitions
5595 [ "x$size" == "x" ] && local size=$(ls -l $dev | awk '{print $5}')
5597 size=$(($size / 1024 / 1024)) # Gb
5599 local partial_arg=""
5600 # Run in partial (fast) mode if the size
5601 # of a partition > 1 GB
5602 [ $size -gt 1 ] && partial_arg="-p"
5604 llverdev --force $partial_arg $llverdev_opts $dev
5610 local llverfs_opts=$2
5611 local use_partial_arg=$3
5612 local partial_arg=""
5613 local size=$(df -B G $dir |tail -n 1 |awk '{print $2}' |sed 's/G//') #GB
5615 # Run in partial (fast) mode if the size
5616 # of a partition > 1 GB
5617 [ "x$use_partial_arg" != "xno" ] && [ $size -gt 1 ] && partial_arg="-p"
5619 llverfs $partial_arg $llverfs_opts $dir
5622 remove_mdt_files() {
5627 local mntpt=$(facet_mntpt $facet)
5628 local opts=$MDS_MOUNT_OPTS
5630 echo "removing files from $mdtdev on $facet: $files"
5631 if [ $(facet_fstype $facet) == ldiskfs ] &&
5632 ! do_facet $facet test -b ${!dev}; then
5633 opts=$(csa_add "$opts" -o loop)
5635 mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
5639 rm $mntpt/ROOT/$f || { rc=$?; break; }
5641 umount -f $mntpt || return $?
5645 duplicate_mdt_files() {
5650 local mntpt=$(facet_mntpt $facet)
5651 local opts=$MDS_MOUNT_OPTS
5653 echo "duplicating files on $mdtdev on $facet: $files"
5654 mkdir -p $mntpt || return $?
5655 if [ $(facet_fstype $facet) == ldiskfs ] &&
5656 ! do_facet $facet test -b ${!dev}; then
5657 opts=$(csa_add "$opts" -o loop)
5659 mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
5670 tmp=$(mktemp $TMP/setfattr.XXXXXXXXXX)
5671 pushd $mntpt/ROOT > /dev/null || return $?
5674 touch $f.bad || return $?
5675 getfattr -n trusted.lov $f | sed "s#$f#&.bad#" > $tmp
5677 [ $rc -eq 0 ] || return $rc
5678 setfattr --restore $tmp || return $?
5684 local devs=${1//,/ }
5687 local rslt=$TMP/sgpdd_survey
5689 # sgpdd-survey cleanups ${rslt}.* files
5691 local cmd="rslt=$rslt $params scsidevs=\"$devs\" $SGPDDSURVEY"
5697 # returns the canonical name for an ldiskfs device
5702 do_facet $facet "dv=\\\$(lctl get_param -n $dev);
5703 if foo=\\\$(lvdisplay -c \\\$dv 2>/dev/null); then
5704 echo dm-\\\${foo##*:};
5706 echo \\\$(basename \\\$dv);
5710 is_sanity_benchmark() {
5711 local benchmarks="dbench bonnie iozone fsx"
5713 for b in $benchmarks; do
5714 if [ "$b" == "$suite" ]; then
5722 $LCTL get_param -n osc.*.kbytesavail | sort -n | head -n1
5725 # Get the block size of the filesystem.
5731 size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
5732 awk '/^Block size:/ {print $3}')
5736 # Check whether the "large_xattr" feature is enabled or not.
5737 large_xattr_enabled() {
5738 [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 0
5740 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
5742 do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
5743 return ${PIPESTATUS[0]}
5746 # Get the maximum xattr size supported by the filesystem.
5750 if large_xattr_enabled; then
5751 # include/linux/limits.h: #define XATTR_SIZE_MAX 65536
5754 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
5755 local block_size=$(get_block_size $SINGLEMDS $mds_dev)
5757 # maximum xattr size = size of block - size of header -
5758 # size of 1 entry - 4 null bytes
5759 size=$((block_size - 32 - 32 - 4))
5765 # Dump the value of the named xattr from a file.
5770 echo "$(getfattr -n $xattr_name --absolute-names --only-values $file)"
5773 # Generate a string with size of $size bytes.
5775 local size=${1:-1024} # in bytes
5777 echo "$(head -c $size < /dev/zero | tr '\0' y)"
5780 reformat_external_journal() {
5781 if [ ! -z ${EJOURNAL} ]; then
5782 local rcmd="do_facet ${SINGLEMDS}"
5784 echo "reformat external journal on ${SINGLEMDS}:${EJOURNAL}"
5785 ${rcmd} mke2fs -O journal_dev ${EJOURNAL} || return 1
5789 # MDT file-level backup/restore
5790 mds_backup_restore() {
5791 local devname=$(mdsdevname ${SINGLEMDS//mds/})
5792 local mntpt=$(facet_mntpt brpt)
5793 local rcmd="do_facet ${SINGLEMDS}"
5794 local metaea=${TMP}/backup_restore.ea
5795 local metadata=${TMP}/backup_restore.tgz
5796 local opts=${MDS_MOUNT_OPTS}
5797 local svc=${SINGLEMDS}_svc
5799 if ! ${rcmd} test -b ${devname}; then
5800 opts=$(csa_add "$opts" -o loop)
5803 echo "file-level backup/restore on ${SINGLEMDS}:${devname}"
5805 # step 1: build mount point
5806 ${rcmd} mkdir -p $mntpt
5807 # step 2: cleanup old backup
5808 ${rcmd} rm -f $metaea $metadata
5810 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
5811 # step 4: backup metaea
5813 ${rcmd} "cd $mntpt && getfattr -R -d -m '.*' -P . > $metaea && cd -" ||
5815 # step 5: backup metadata
5817 ${rcmd} tar zcf $metadata -C $mntpt/ . > /dev/null 2>&1 || return 3
5819 ${rcmd} umount -d $mntpt || return 4
5820 # step 7: reformat external journal if needed
5821 reformat_external_journal || return 5
5822 # step 8: reformat dev
5823 echo "reformat new device"
5824 add ${SINGLEMDS} $(mkfs_opts ${SINGLEMDS}) --backfstype ldiskfs \
5825 --reformat $devname > /dev/null || return 6
5827 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 7
5828 # step 10: restore metadata
5830 ${rcmd} tar zxfp $metadata -C $mntpt > /dev/null 2>&1 || return 8
5831 # step 11: restore metaea
5833 ${rcmd} "cd $mntpt && setfattr --restore=$metaea && cd - " || return 9
5834 # step 12: remove recovery logs
5835 echo "remove recovery logs"
5836 ${rcmd} rm -fv $mntpt/OBJECTS/* $mntpt/CATALOGS
5837 # step 13: umount dev
5838 ${rcmd} umount -d $mntpt || return 10
5839 # step 14: cleanup tmp backup
5840 ${rcmd} rm -f $metaea $metadata
5841 # step 15: reset device label - it's not virgin on
5842 ${rcmd} e2label $devname ${!svc}
5847 local devname=$(mdsdevname ${SINGLEMDS//mds/})
5848 local mntpt=$(facet_mntpt brpt)
5849 local rcmd="do_facet ${SINGLEMDS}"
5851 local opts=${MDS_MOUNT_OPTS}
5853 if ! ${rcmd} test -b ${devname}; then
5854 opts=$(csa_add "$opts" -o loop)
5857 echo "remove OI files: idx=${idx}"
5859 # step 1: build mount point
5860 ${rcmd} mkdir -p $mntpt
5862 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
5863 if [ -z $idx ]; then
5864 # step 3: remove all OI files
5865 ${rcmd} rm -fv $mntpt/oi.16*
5866 elif [ $idx -lt 2 ]; then
5867 ${rcmd} rm -fv $mntpt/oi.16.${idx}
5871 # others, rm oi.16.[idx, idx * idx, idx ** ...]
5872 for ((i=${idx}; i<64; i=$((i * idx)))); do
5873 ${rcmd} rm -fv $mntpt/oi.16.${i}
5877 ${rcmd} umount -d $mntpt || return 2
5878 # OI files will be recreated when mounted as lustre next time.
5881 # generate maloo upload-able log file name
5882 # \param logname specify unique part of file name
5883 generate_logname() {
5884 local logname=${1:-"default_logname"}
5886 echo "$TESTLOG_PREFIX.$TESTNAME.$logname.$(hostname -s).log"