Whamcloud - gitweb
LU-12056 ldiskfs: add trusted.projid virtual xattr
[fs/lustre-release.git] / lustre / include / uapi / linux / lustre / lustre_idl.h
1 /*
2  * GPL HEADER START
3  *
4  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 only,
8  * as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License version 2 for more details (a copy is included
14  * in the LICENSE file that accompanied this code).
15  *
16  * You should have received a copy of the GNU General Public License
17  * version 2 along with this program; If not, see
18  * http://www.gnu.org/licenses/gpl-2.0.html
19  *
20  * GPL HEADER END
21  */
22 /*
23  * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
24  * Use is subject to license terms.
25  *
26  * Copyright (c) 2011, 2017, Intel Corporation.
27  */
28 /*
29  * This file is part of Lustre, http://www.lustre.org/
30  *
31  * Lustre wire protocol definitions.
32  */
33
34 /** \defgroup lustreidl lustreidl
35  *
36  * Lustre wire protocol definitions.
37  *
38  * ALL structs passing over the wire should be declared here.  Structs
39  * that are used in interfaces with userspace should go in lustre_user.h.
40  *
41  * All structs being declared here should be built from simple fixed-size
42  * types defined in linux/types.h or be built from other types or
43  * structs also declared in this file.  Similarly, all flags and magic
44  * values in those structs should also be declared here.  This ensures
45  * that the Lustre wire protocol is not influenced by external dependencies.
46  *
47  * The only other acceptable items in this file are VERY SIMPLE accessor
48  * functions to avoid callers grubbing inside the structures. Nothing that
49  * depends on external functions or definitions should be in here.
50  *
51  * Structs must be properly aligned to put 64-bit values on an 8-byte
52  * boundary.  Any structs being added here must also be added to
53  * utils/wirecheck.c and "make newwiretest" run to regenerate the
54  * utils/wiretest.c sources.  This allows us to verify that wire structs
55  * have the proper alignment/size on all architectures.
56  *
57  * DO NOT CHANGE any of the structs, flags, values declared here and used
58  * in released Lustre versions.  Some structs may have padding fields that
59  * can be used.  Some structs might allow addition at the end (verify this
60  * in the code to ensure that new/old clients that see this larger struct
61  * do not fail, otherwise you need to implement protocol compatibility).
62  *
63  * @{
64  */
65
66 #ifndef _LUSTRE_IDL_H_
67 #define _LUSTRE_IDL_H_
68
69 #include <asm/byteorder.h>
70 #include <linux/errno.h>
71 #include <linux/fiemap.h>
72 #include <linux/types.h>
73 #include <linux/lnet/lnet-types.h>
74 #include <linux/lustre/lustre_user.h>
75 #include <linux/lustre/lustre_ver.h>
76
77 #if defined(__cplusplus)
78 extern "C" {
79 #endif
80
81 /*
82  *  GENERAL STUFF
83  */
84 /* FOO_REQUEST_PORTAL is for incoming requests on the FOO
85  * FOO_REPLY_PORTAL   is for incoming replies on the FOO
86  * FOO_BULK_PORTAL    is for incoming bulk on the FOO
87  */
88
89 #define CONNMGR_REQUEST_PORTAL          1
90 #define CONNMGR_REPLY_PORTAL            2
91 #define OSC_REPLY_PORTAL                4
92 #define OST_IO_PORTAL                   6
93 #define OST_CREATE_PORTAL               7
94 #define OST_BULK_PORTAL                 8
95 #define MDC_REPLY_PORTAL               10
96 #define MDS_REQUEST_PORTAL             12
97 #define MDS_IO_PORTAL                   13
98 #define MDS_BULK_PORTAL                14
99 #define LDLM_CB_REQUEST_PORTAL         15
100 #define LDLM_CB_REPLY_PORTAL           16
101 #define LDLM_CANCEL_REQUEST_PORTAL     17
102 #define LDLM_CANCEL_REPLY_PORTAL       18
103 /* #define MDS_SETATTR_PORTAL             22 obsolete after 2.13 */
104 #define MDS_READPAGE_PORTAL            23
105 #define OUT_PORTAL                      24
106 #define MGC_REPLY_PORTAL               25
107 #define MGS_REQUEST_PORTAL             26
108 #define MGS_REPLY_PORTAL               27
109 #define OST_REQUEST_PORTAL             28
110 #define FLD_REQUEST_PORTAL             29
111 #define SEQ_METADATA_PORTAL            30
112 #define SEQ_DATA_PORTAL                31
113 #define SEQ_CONTROLLER_PORTAL          32
114 #define MGS_BULK_PORTAL                33
115 /* #define DVS_PORTAL                   63 */
116 /* reserved for Cray DVS - spitzcor@cray.com, roe@cray.com, n8851@cray.com */
117
118 /**
119  * Describes a range of sequence, lsr_start is included but lsr_end is
120  * not in the range.
121  * Same structure is used in fld module where lsr_index field holds mdt id
122  * of the home mdt.
123  */
124 struct lu_seq_range {
125         __u64 lsr_start;
126         __u64 lsr_end;
127         __u32 lsr_index;
128         __u32 lsr_flags;
129 };
130
131 struct lu_seq_range_array {
132         __u32 lsra_count;
133         __u32 lsra_padding;
134         struct lu_seq_range lsra_lsr[0];
135 };
136
137 #define LU_SEQ_RANGE_MDT        0x0
138 #define LU_SEQ_RANGE_OST        0x1
139 #define LU_SEQ_RANGE_ANY        0x3
140
141 #define LU_SEQ_RANGE_MASK       0x3
142
143 /** \defgroup lu_fid lu_fid
144  * @{ */
145
146 extern void lustre_lma_swab(struct lustre_mdt_attrs *lma);
147 extern void lustre_lma_init(struct lustre_mdt_attrs *lma,
148                             const struct lu_fid *fid,
149                             __u32 compat, __u32 incompat);
150 extern void lustre_loa_swab(struct lustre_ost_attrs *loa,
151                             bool to_cpu);
152 extern void lustre_loa_init(struct lustre_ost_attrs *loa,
153                             const struct lu_fid *fid,
154                             __u32 compat, __u32 incompat);
155
156 /* copytool can use any nonnegative integer to represent archive-Ids during
157  * register with MDT thru kuc.
158  * archive num = 0 => all
159  * archive num from 1 to MAX_U32
160  */
161 #define LL_HSM_ORIGIN_MAX_ARCHIVE       (sizeof(__u32) * 8)
162 /* the max count of archive ids that one agent can support */
163 #define LL_HSM_MAX_ARCHIVES_PER_AGENT   1024
164
165 /**
166  * HSM on-disk attributes stored in a separate xattr.
167  */
168 struct hsm_attrs {
169         /** Bitfield for supported data in this structure. For future use. */
170         __u32   hsm_compat;
171
172         /** HSM flags, see hsm_flags enum below */
173         __u32   hsm_flags;
174         /** backend archive id associated with the file */
175         __u64   hsm_arch_id;
176         /** version associated with the last archiving, if any */
177         __u64   hsm_arch_ver;
178 };
179 extern void lustre_hsm_swab(struct hsm_attrs *attrs);
180
181 /**
182  * fid constants
183  */
184 enum {
185         /** LASTID file has zero OID */
186         LUSTRE_FID_LASTID_OID = 0UL,
187         /** initial fid id value */
188         LUSTRE_FID_INIT_OID  = 1UL
189 };
190
191 /**
192  * Different FID Format
193  * http://arch.lustre.org/index.php?title=Interoperability_fids_zfs#NEW.0
194  *
195  * FID:
196  * File IDentifier generated by client from range allocated by the seq service.
197  * First 0x400 sequences [2^33, 2^33 + 0x400] are reserved for system use. Note
198  * that on ldiskfs MDTs that IGIF FIDs can use inode numbers starting at 12,
199  * but this is in the IGIF SEQ rangeand does not conflict with assigned FIDs.
200  *
201  * IGIF:
202  * Inode and Generation In FID, a surrogate FID used to globally identify an
203  * existing object on OLD formatted MDT file system. This would only be used on
204  * MDT0 in a DNE filesystem, because there are not expected to be any OLD
205  * formatted DNE filesystems. Belongs to a sequence in [12, 2^32 - 1] range,
206  * where sequence number is inode number, and inode generation is used as OID.
207  * NOTE: This assumes no more than 2^32-1 inodes exist in the MDT filesystem,
208  * which is the maximum possible for an ldiskfs backend. NOTE: This assumes
209  * that the reserved ext3/ext4/ldiskfs inode numbers [0-11] are never visible
210  * to clients, which has always been true.
211  *
212  * IDIF:
213  * Object ID in FID, a surrogate FID used to globally identify an existing
214  * object on OLD formatted OST file system. Belongs to a sequence in
215  * [2^32, 2^33 - 1]. Sequence number is calculated as:
216  *      1 << 32 | (ost_index << 16) | ((objid >> 32) & 0xffff)
217  * that is, SEQ consists of 16-bit OST index, and higher 16 bits of object ID.
218  * The generation of unique SEQ values per OST allows the IDIF FIDs to be
219  * identified in the FLD correctly. The OID field is calculated as:
220  *      objid & 0xffffffff
221  * that is, it consists of lower 32 bits of object ID. NOTE This assumes that
222  * no more than 2^48-1 objects have ever been created on an OST, and that no
223  * more than 65535 OSTs are in use. Both are very reasonable assumptions (can
224  * uniquely map all objects on an OST that created 1M objects per second for 9
225  * years, or combinations thereof).
226  *
227  * OST_MDT0:
228  * Surrogate FID used to identify an existing object on OLD formatted OST
229  * filesystem. Belongs to the reserved sequence 0, and is used internally prior
230  * to the introduction of FID-on-OST, at which point IDIF will be used to
231  * identify objects as residing on a specific OST.
232  *
233  * LLOG:
234  * For Lustre Log objects the object sequence 1 is used. This is compatible with
235  * both OLD and NEW.1 namespaces, as this SEQ number is in the ext3/ldiskfs
236  * reserved inode range and does not conflict with IGIF sequence numbers.
237  *
238  * ECHO:
239  * For testing OST IO performance the object sequence 2 is used. This is
240  * compatible with both OLD and NEW.1 namespaces, as this SEQ number is in the
241  * ext3/ldiskfs reserved inode range and does not conflict with IGIF sequence
242  * numbers.
243  *
244  * OST_MDT1 .. OST_MAX:
245  * For testing with multiple MDTs the object sequence 3 through 9 is used,
246  * allowing direct mapping of MDTs 1 through 7 respectively, for a total of 8
247  * MDTs including OST_MDT0. This matches the legacy CMD project "group"
248  * mappings. However, this SEQ range is only for testing prior to any production
249  * DNE release, as the objects in this range conflict across all OSTs, as the
250  * OST index is not part of the FID.
251  *
252  *
253  * For compatibility with existing OLD OST network protocol structures, the FID
254  * must map onto the o_id and o_gr in a manner that ensures existing objects are
255  * identified consistently for IO, as well as onto the lock namespace to ensure
256  * both IDIFs map onto the same objects for IO as well as resources in the DLM.
257  *
258  * DLM OLD OBIF/IDIF:
259  * resource[] = {o_id, o_seq, 0, 0};  // o_seq == 0 for production releases
260  *
261  * DLM NEW.1 FID (this is the same for both the MDT and OST):
262  * resource[] = {SEQ, OID, VER, HASH};
263  *
264  * Note that for mapping IDIF values to DLM resource names the o_id may be
265  * larger than the 2^33 reserved sequence numbers for IDIF, so it is possible
266  * for the o_id numbers to overlap FID SEQ numbers in the resource. However, in
267  * all production releases the OLD o_seq field is always zero, and all valid FID
268  * OID values are non-zero, so the lock resources will not collide.
269  *
270  * For objects within the IDIF range, group extraction (non-CMD) will be:
271  * o_id = (fid->f_seq & 0x7fff) << 16 | fid->f_oid;
272  * o_seq = 0;  // formerly group number
273  */
274
275 /**
276  * Note that reserved SEQ numbers below 12 will conflict with ldiskfs
277  * inodes in the IGIF namespace, so these reserved SEQ numbers can be
278  * used for other purposes and not risk collisions with existing inodes.
279  */
280 enum fid_seq {
281         FID_SEQ_OST_MDT0        = 0,
282         FID_SEQ_LLOG            = 1, /* unnamed llogs */
283         FID_SEQ_ECHO            = 2,
284         FID_SEQ_UNUSED_START    = 3, /* Unused */
285         FID_SEQ_UNUSED_END      = 9, /* Unused */
286         FID_SEQ_LLOG_NAME       = 10, /* named llogs */
287         FID_SEQ_RSVD            = 11,
288         FID_SEQ_IGIF            = 12,
289         FID_SEQ_IGIF_MAX        = 0x0ffffffffULL,
290         FID_SEQ_IDIF            = 0x100000000ULL,
291         FID_SEQ_IDIF_MAX        = 0x1ffffffffULL,
292         /* Normal FID sequence starts from this value, i.e. 1<<33 */
293         FID_SEQ_START           = 0x200000000ULL,
294         /* sequence for local pre-defined FIDs listed in local_oid */
295         FID_SEQ_LOCAL_FILE      = 0x200000001ULL,
296         FID_SEQ_DOT_LUSTRE      = 0x200000002ULL,
297         /* sequence is used for local named objects FIDs generated
298          * by local_object_storage library */
299         FID_SEQ_LOCAL_NAME      = 0x200000003ULL,
300         /* Because current FLD will only cache the fid sequence, instead
301          * of oid on the client side, if the FID needs to be exposed to
302          * clients sides, it needs to make sure all of fids under one
303          * sequence will be located in one MDT. */
304         FID_SEQ_SPECIAL         = 0x200000004ULL,
305         FID_SEQ_QUOTA           = 0x200000005ULL,
306         FID_SEQ_QUOTA_GLB       = 0x200000006ULL,
307         FID_SEQ_ROOT            = 0x200000007ULL,  /* Located on MDT0 */
308         FID_SEQ_LAYOUT_RBTREE   = 0x200000008ULL,
309         /* sequence is used for update logs of cross-MDT operation */
310         FID_SEQ_UPDATE_LOG      = 0x200000009ULL,
311         /* Sequence is used for the directory under which update logs
312          * are created. */
313         FID_SEQ_UPDATE_LOG_DIR  = 0x20000000aULL,
314         FID_SEQ_NORMAL          = 0x200000400ULL,
315         FID_SEQ_LOV_DEFAULT     = 0xffffffffffffffffULL
316 };
317
318 #define OBIF_OID_MAX_BITS           32
319 #define OBIF_MAX_OID                (1ULL << OBIF_OID_MAX_BITS)
320 #define OBIF_OID_MASK               ((1ULL << OBIF_OID_MAX_BITS) - 1)
321 #define IDIF_OID_MAX_BITS           48
322 #define IDIF_MAX_OID                (1ULL << IDIF_OID_MAX_BITS)
323 #define IDIF_OID_MASK               ((1ULL << IDIF_OID_MAX_BITS) - 1)
324
325 /** OID for FID_SEQ_SPECIAL */
326 enum special_oid {
327         /* Big Filesystem Lock to serialize rename operations */
328         FID_OID_SPECIAL_BFL     = 1UL,
329 };
330
331 /** OID for FID_SEQ_DOT_LUSTRE */
332 enum dot_lustre_oid {
333         FID_OID_DOT_LUSTRE      = 1UL,
334         FID_OID_DOT_LUSTRE_OBF  = 2UL,
335         FID_OID_DOT_LUSTRE_LPF  = 3UL,
336 };
337
338 /** OID for FID_SEQ_ROOT */
339 enum root_oid {
340         FID_OID_ROOT            = 1UL,
341         FID_OID_ECHO_ROOT       = 2UL,
342 };
343
344 struct lu_orphan_rec {
345         /* The MDT-object's FID referenced by the orphan OST-object */
346         struct lu_fid   lor_fid;
347         __u32           lor_uid;
348         __u32           lor_gid;
349 };
350
351 struct lu_orphan_ent {
352         /* The orphan OST-object's FID */
353         struct lu_fid           loe_key;
354         struct lu_orphan_rec    loe_rec;
355 };
356
357 struct lu_orphan_rec_v2 {
358         struct lu_orphan_rec    lor_rec;
359         struct ost_layout       lor_layout;
360         __u32                   lor_padding;
361 };
362
363 struct lu_orphan_ent_v2 {
364         /* The orphan OST-object's FID */
365         struct lu_fid           loe_key;
366         struct lu_orphan_rec_v2 loe_rec;
367 };
368
369 struct lu_orphan_rec_v3 {
370         struct lu_orphan_rec    lor_rec;
371         struct ost_layout       lor_layout;
372         /* The OST-object declared layout version in PFID EA.*/
373         __u32                   lor_layout_version;
374         /* The OST-object declared layout range (of version) in PFID EA.*/
375         __u32                   lor_range;
376         __u32                   lor_padding_1;
377         __u64                   lor_padding_2;
378 };
379
380 struct lu_orphan_ent_v3 {
381         /* The orphan OST-object's FID */
382         struct lu_fid           loe_key;
383         struct lu_orphan_rec_v3 loe_rec;
384 };
385
386 /** @} lu_fid */
387
388 /** \defgroup lu_dir lu_dir
389  * @{ */
390
391 /**
392  * Enumeration of possible directory entry attributes.
393  *
394  * Attributes follow directory entry header in the order they appear in this
395  * enumeration.
396  */
397 enum lu_dirent_attrs {
398         LUDA_FID                = 0x0001,
399         LUDA_TYPE               = 0x0002,
400         LUDA_64BITHASH          = 0x0004,
401
402         /* The following attrs are used for MDT internal only,
403          * not visible to client */
404
405         /* Something in the record is unknown, to be verified in further. */
406         LUDA_UNKNOWN            = 0x0400,
407         /* Ignore this record, go to next directly. */
408         LUDA_IGNORE             = 0x0800,
409         /* The system is upgraded, has beed or to be repaired (dryrun). */
410         LUDA_UPGRADE            = 0x1000,
411         /* The dirent has been repaired, or to be repaired (dryrun). */
412         LUDA_REPAIR             = 0x2000,
413         /* Only check but not repair the dirent inconsistency */
414         LUDA_VERIFY_DRYRUN      = 0x4000,
415         /* Verify the dirent consistency */
416         LUDA_VERIFY             = 0x8000,
417 };
418
419 #define LU_DIRENT_ATTRS_MASK    0xff00
420
421 /**
422  * Layout of readdir pages, as transmitted on wire.
423  */
424 struct lu_dirent {
425         /** valid if LUDA_FID is set. */
426         struct lu_fid lde_fid;
427         /** a unique entry identifier: a hash or an offset. */
428         __u64         lde_hash;
429         /** total record length, including all attributes. */
430         __u16         lde_reclen;
431         /** name length */
432         __u16         lde_namelen;
433         /** optional variable size attributes following this entry.
434          *  taken from enum lu_dirent_attrs.
435          */
436         __u32         lde_attrs;
437         /** name is followed by the attributes indicated in ->ldp_attrs, in
438          *  their natural order. After the last attribute, padding bytes are
439          *  added to make ->lde_reclen a multiple of 8.
440          */
441         char          lde_name[0];
442 };
443
444 /*
445  * Definitions of optional directory entry attributes formats.
446  *
447  * Individual attributes do not have their length encoded in a generic way. It
448  * is assumed that consumer of an attribute knows its format. This means that
449  * it is impossible to skip over an unknown attribute, except by skipping over all
450  * remaining attributes (by using ->lde_reclen), which is not too
451  * constraining, because new server versions will append new attributes at
452  * the end of an entry.
453  */
454
455 /**
456  * Fid directory attribute: a fid of an object referenced by the entry. This
457  * will be almost always requested by the client and supplied by the server.
458  *
459  * Aligned to 8 bytes.
460  */
461 /* To have compatibility with 1.8, lets have fid in lu_dirent struct. */
462
463 /**
464  * File type.
465  *
466  * Aligned to 2 bytes.
467  */
468 struct luda_type {
469         __u16 lt_type;
470 };
471
472 struct lu_dirpage {
473         __u64            ldp_hash_start;
474         __u64            ldp_hash_end;
475         __u32            ldp_flags;
476         __u32            ldp_pad0;
477         struct lu_dirent ldp_entries[0];
478 };
479
480 enum lu_dirpage_flags {
481         /**
482          * dirpage contains no entry.
483          */
484         LDF_EMPTY   = 1 << 0,
485         /**
486          * last entry's lde_hash equals ldp_hash_end.
487          */
488         LDF_COLLIDE = 1 << 1
489 };
490
491 static inline struct lu_dirent *lu_dirent_start(struct lu_dirpage *dp)
492 {
493         if (__le32_to_cpu(dp->ldp_flags) & LDF_EMPTY)
494                 return NULL;
495         else
496                 return dp->ldp_entries;
497 }
498
499 static inline struct lu_dirent *lu_dirent_next(struct lu_dirent *ent)
500 {
501         struct lu_dirent *next;
502
503         if (__le16_to_cpu(ent->lde_reclen) != 0)
504                 next = ((void *)ent) + __le16_to_cpu(ent->lde_reclen);
505         else
506                 next = NULL;
507
508         return next;
509 }
510
511 static inline __kernel_size_t lu_dirent_calc_size(size_t namelen, __u16 attr)
512 {
513         __kernel_size_t size;
514
515         if (attr & LUDA_TYPE) {
516                 const __kernel_size_t align = sizeof(struct luda_type) - 1;
517
518                 size = (sizeof(struct lu_dirent) + namelen + 1 + align) &
519                        ~align;
520                 size += sizeof(struct luda_type);
521         } else {
522                 size = sizeof(struct lu_dirent) + namelen + 1;
523         }
524
525         return (size + 7) & ~7;
526 }
527
528 static inline __u16 lu_dirent_type_get(struct lu_dirent *ent)
529 {
530         __u16 type = 0;
531         struct luda_type *lt;
532         int len = 0;
533
534         if (__le32_to_cpu(ent->lde_attrs) & LUDA_TYPE) {
535                 const unsigned int align = sizeof(struct luda_type) - 1;
536
537                 len = __le16_to_cpu(ent->lde_namelen);
538                 len = (len + align) & ~align;
539                 lt = (void *)ent->lde_name + len;
540                 type = __le16_to_cpu(lt->lt_type);
541         }
542
543         return type;
544 }
545
546 #define MDS_DIR_END_OFF 0xfffffffffffffffeULL
547
548 /**
549  * MDS_READPAGE page size
550  *
551  * This is the directory page size packed in MDS_READPAGE RPC.
552  * It's different than PAGE_SIZE because the client needs to
553  * access the struct lu_dirpage header packed at the beginning of
554  * the "page" and without this there isn't any way to know find the
555  * lu_dirpage header is if client and server PAGE_SIZE differ.
556  */
557 #define LU_PAGE_SHIFT 12
558 #define LU_PAGE_SIZE  (1UL << LU_PAGE_SHIFT)
559 #define LU_PAGE_MASK  (~(LU_PAGE_SIZE - 1))
560
561 #define LU_PAGE_COUNT (1 << (PAGE_SHIFT - LU_PAGE_SHIFT))
562
563 /** @} lu_dir */
564
565 struct lustre_handle {
566         __u64 cookie;
567 };
568 #define DEAD_HANDLE_MAGIC 0xdeadbeefcafebabeULL
569
570 static inline bool lustre_handle_is_used(const struct lustre_handle *lh)
571 {
572         return lh->cookie != 0;
573 }
574
575 static inline bool lustre_handle_equal(const struct lustre_handle *lh1,
576                                        const struct lustre_handle *lh2)
577 {
578         return lh1->cookie == lh2->cookie;
579 }
580
581 static inline void lustre_handle_copy(struct lustre_handle *tgt,
582                                       const struct lustre_handle *src)
583 {
584         tgt->cookie = src->cookie;
585 }
586
587 /* lustre_msg struct magic.  DON'T use swabbed values of MAGIC as magic! */
588 enum lustre_msg_magic {
589         LUSTRE_MSG_MAGIC_V2             = 0x0BD00BD3,
590         LUSTRE_MSG_MAGIC_V2_SWABBED     = 0xD30BD00B,
591         LUSTRE_MSG_MAGIC                = LUSTRE_MSG_MAGIC_V2
592 };
593
594 /* flags for lm_flags */
595 enum lustre_msghdr {
596         MSGHDR_AT_SUPPORT       = 0x1,  /* adaptive timeouts, lm_cksum valid
597                                          * in early reply messages */
598         MSGHDR_CKSUM_INCOMPAT18 = 0x2,  /* compat for 1.8, needs to be set well
599                                          * beyond 2.8.0 for compatibility */
600 };
601
602 #define lustre_msg lustre_msg_v2
603 /* we depend on this structure to be 8-byte aligned */
604 /* this type is only endian-adjusted in lustre_unpack_msg() */
605 struct lustre_msg_v2 {
606         __u32 lm_bufcount;      /* number of buffers in lm_buflens[] */
607         __u32 lm_secflvr;       /* 0 = no crypto, or sptlrpc security flavour */
608         __u32 lm_magic;         /* RPC version magic = LUSTRE_MSG_MAGIC_V2 */
609         __u32 lm_repsize;       /* size of preallocated reply buffer */
610         __u32 lm_cksum;         /* CRC32 of ptlrpc_body early reply messages */
611         __u32 lm_flags;         /* enum lustre_msghdr MSGHDR_* flags */
612         __u32 lm_padding_2;     /* unused */
613         __u32 lm_padding_3;     /* unused */
614         __u32 lm_buflens[0];    /* length of additional buffers in bytes,
615                                  * padded to a multiple of 8 bytes. */
616         /*
617          * message buffers are packed after padded lm_buflens[] array,
618          * padded to a multiple of 8 bytes each to align contents.
619          */
620 };
621
622 /* ptlrpc_body packet pb_types */
623 #define PTL_RPC_MSG_REQUEST     4711    /* normal RPC request message */
624 #define PTL_RPC_MSG_ERR         4712    /* error reply if request unprocessed */
625 #define PTL_RPC_MSG_REPLY       4713    /* normal RPC reply message */
626
627 /* ptlrpc_body pb_version ((target_version << 16) | rpc_version) */
628 enum lustre_msg_version {
629         PTLRPC_MSG_VERSION      = 0x00000003,
630         LUSTRE_VERSION_MASK     = 0xffff0000,
631         LUSTRE_OBD_VERSION      = 0x00010000,
632         LUSTRE_MDS_VERSION      = 0x00020000,
633         LUSTRE_OST_VERSION      = 0x00030000,
634         LUSTRE_DLM_VERSION      = 0x00040000,
635         LUSTRE_LOG_VERSION      = 0x00050000,
636         LUSTRE_MGS_VERSION      = 0x00060000,
637 };
638
639 /* pb_flags that apply to all request messages */
640 /* #define MSG_LAST_REPLAY      0x0001 obsolete 2.0 => {REQ,LOCK}_REPLAY_DONE */
641 #define MSG_RESENT              0x0002 /* was previously sent, no reply seen */
642 #define MSG_REPLAY              0x0004 /* was processed, got reply, recovery */
643 /* #define MSG_AT_SUPPORT       0x0008 obsolete since 1.5, AT always enabled */
644 /* #define MSG_DELAY_REPLAY     0x0010 obsolete since 2.0 */
645 /* #define MSG_VERSION_REPLAY   0x0020 obsolete since 1.8.2, VBR always on */
646 #define MSG_REQ_REPLAY_DONE     0x0040 /* request replay over, locks next */
647 #define MSG_LOCK_REPLAY_DONE    0x0080 /* lock replay over, client done */
648
649 /* pb_op_flags for connect opcodes: MDS_CONNECT, OST_CONNECT, MGS_CONNECT */
650 #define MSG_CONNECT_RECOVERING  0x00000001 /* target is in recovery */
651 #define MSG_CONNECT_RECONNECT   0x00000002 /* tgt already has client import */
652 #define MSG_CONNECT_REPLAYABLE  0x00000004 /* target supports RPC replay */
653 /* #define MSG_CONNECT_PEER     0x00000008 obsolete since 1.2, removed in 1.5 */
654 #define MSG_CONNECT_LIBCLIENT   0x00000010 /* obsolete since 2.3, removed 2.6 */
655 #define MSG_CONNECT_INITIAL     0x00000020 /* first client connection attempt */
656 /* #define MSG_CONNECT_ASYNC    0x00000040 obsolete since 1.5 */
657 #define MSG_CONNECT_NEXT_VER    0x00000080 /* use next version of lustre_msg */
658 #define MSG_CONNECT_TRANSNO     0x00000100 /* client sent transno in replay */
659
660 /* number of previous object versions in pb_pre_versions[] */
661 #define PTLRPC_NUM_VERSIONS     4
662 /* without gss, ptlrpc_body is put at the first buffer. */
663 struct ptlrpc_body_v3 {
664         struct lustre_handle pb_handle;
665         __u32 pb_type;          /* request/reply/err type: PTL_RPC_MSG_* */
666         __u32 pb_version;       /* LUSTRE_*_VERSION | PTLRPC_MSG_VERSION */
667         __u32 pb_opc;           /* RPC opcodes: MDS_*, OST_*, LDLM_, ... */
668         __u32 pb_status;        /* negative Linux x86 error number */
669         __u64 pb_last_xid;      /* highest replied XID w/o lower unreplied XID*/
670         __u16 pb_tag;           /* multiple modifying RPCs virtual slot index */
671         __u16 pb_padding0;
672         __u32 pb_padding1;
673         __u64 pb_last_committed;/* rep: highest pb_transno committed to disk */
674         __u64 pb_transno;       /* server-assigned transno for modifying RPCs */
675         __u32 pb_flags;         /* req: MSG_* flags */
676         __u32 pb_op_flags;      /* req: MSG_CONNECT_* flags */
677         __u32 pb_conn_cnt;      /* connect instance of this client on server */
678         __u32 pb_timeout;       /* req: max wait time; rep: service estimate */
679         __u32 pb_service_time;  /* rep: server arrival to reply in seconds */
680         __u32 pb_limit;         /* rep: dynamic DLM LRU lock count limit */
681         __u64 pb_slv;           /* rep: dynamic DLM LRU server lock volume */
682         /* VBR: rep: previous pb_version(s) of objects modified by this RPC */
683         __u64 pb_pre_versions[PTLRPC_NUM_VERSIONS];
684         __u64 pb_mbits; /**< match bits for bulk request */
685         /* padding for future needs - fix lustre_swab_ptlrpc_body() also */
686         __u64 pb_padding64_0;
687         __u64 pb_padding64_1;
688         __u64 pb_padding64_2;
689         char  pb_jobid[LUSTRE_JOBID_SIZE]; /* req: ASCII jobid from env + NUL */
690 };
691 #define ptlrpc_body     ptlrpc_body_v3
692
693 struct ptlrpc_body_v2 {
694         struct lustre_handle pb_handle;
695         __u32 pb_type;
696         __u32 pb_version;
697         __u32 pb_opc;
698         __u32 pb_status;
699         __u64 pb_last_xid; /* highest replied XID without lower unreplied XID */
700         __u16 pb_tag;      /* virtual slot idx for multiple modifying RPCs */
701         __u16 pb_padding0;
702         __u32 pb_padding1;
703         __u64 pb_last_committed;
704         __u64 pb_transno;
705         __u32 pb_flags;
706         __u32 pb_op_flags;
707         __u32 pb_conn_cnt;
708         __u32 pb_timeout;  /* for req, the deadline, for rep, the service est */
709         __u32 pb_service_time; /* for rep, actual service time, also used for
710                                   net_latency of req */
711         __u32 pb_limit;
712         __u64 pb_slv;
713         /* VBR: pre-versions */
714         __u64 pb_pre_versions[PTLRPC_NUM_VERSIONS];
715         __u64 pb_mbits; /**< unused in V2 */
716         /* padding for future needs */
717         __u64 pb_padding64_0;
718         __u64 pb_padding64_1;
719         __u64 pb_padding64_2;
720 };
721
722 /* message body offset for lustre_msg_v2 */
723 /* ptlrpc body offset in all request/reply messages */
724 #define MSG_PTLRPC_BODY_OFF             0
725
726 /* normal request/reply message record offset */
727 #define REQ_REC_OFF                     1
728 #define REPLY_REC_OFF                   1
729
730 /* ldlm request message body offset */
731 #define DLM_LOCKREQ_OFF                 1 /* lockreq offset */
732 #define DLM_REQ_REC_OFF                 2 /* normal dlm request record offset */
733
734 /* ldlm intent lock message body offset */
735 #define DLM_INTENT_IT_OFF               2 /* intent lock it offset */
736 #define DLM_INTENT_REC_OFF              3 /* intent lock record offset */
737
738 /* ldlm reply message body offset */
739 #define DLM_LOCKREPLY_OFF               1 /* lockrep offset */
740 #define DLM_REPLY_REC_OFF               2 /* reply record offset */
741
742 /** only use in req->rq_{req,rep}_swab_mask */
743 #define MSG_PTLRPC_HEADER_OFF           31
744
745 /* Connect flags */
746 #define OBD_CONNECT_RDONLY                0x1ULL /*client has read-only access*/
747 #define OBD_CONNECT_INDEX                 0x2ULL /*connect specific LOV idx */
748 #define OBD_CONNECT_MDS                   0x4ULL /*connect from MDT to OST */
749 #define OBD_CONNECT_GRANT                 0x8ULL /*OSC gets grant at connect */
750 #define OBD_CONNECT_SRVLOCK              0x10ULL /*server takes locks for cli */
751 #define OBD_CONNECT_VERSION              0x20ULL /*Lustre versions in ocd */
752 #define OBD_CONNECT_REQPORTAL            0x40ULL /*Separate non-IO req portal */
753 #define OBD_CONNECT_ACL                  0x80ULL /*access control lists */
754 #define OBD_CONNECT_XATTR               0x100ULL /*client use extended attr */
755 #define OBD_CONNECT_LARGE_ACL           0x200ULL /* more than 32 ACL entries */
756 /* was OBD_CONNECT_TRUNCLOCK           0x400ULL *locks on server for punch */
757 #define OBD_CONNECT_TRANSNO             0x800ULL /*replay sends init transno */
758 #define OBD_CONNECT_IBITS              0x1000ULL /* not checked in 2.11+ */
759 #define OBD_CONNECT_BARRIER            0x2000ULL /* write barrier. Resevered to
760                                                   * avoid use on client.
761                                                   */
762 #define OBD_CONNECT_ATTRFID            0x4000ULL /*Server can GetAttr By Fid*/
763 #define OBD_CONNECT_NODEVOH            0x8000ULL /*No open hndl on specl nodes*/
764 #define OBD_CONNECT_RMT_CLIENT        0x10000ULL /* Remote client, never used
765                                                   * in production. Removed in
766                                                   * 2.9. Keep this flag to
767                                                   * avoid reusing.
768                                                   */
769 #define OBD_CONNECT_RMT_CLIENT_FORCE  0x20000ULL /* Remote client by force,
770                                                   * never used in production.
771                                                   * Removed in 2.9. Keep this
772                                                   * flag to avoid reusing.
773                                                   */
774 #define OBD_CONNECT_BRW_SIZE          0x40000ULL /*Max bytes per rpc */
775 #define OBD_CONNECT_QUOTA64           0x80000ULL /*Not used since 2.4 */
776 #define OBD_CONNECT_MDS_CAPA         0x100000ULL /*MDS capability */
777 #define OBD_CONNECT_OSS_CAPA         0x200000ULL /*OSS capability */
778 #define OBD_CONNECT_CANCELSET        0x400000ULL /*Early batched cancels. */
779 #define OBD_CONNECT_SOM              0x800000ULL /*Size on MDS */
780 #define OBD_CONNECT_AT              0x1000000ULL /*client uses AT */
781 #define OBD_CONNECT_LRU_RESIZE      0x2000000ULL /*LRU resize feature. */
782 #define OBD_CONNECT_MDS_MDS         0x4000000ULL /*MDS-MDS connection */
783 #define OBD_CONNECT_REAL            0x8000000ULL /* obsolete since 2.8 */
784 #define OBD_CONNECT_CHANGE_QS      0x10000000ULL /*Not used since 2.4 */
785 #define OBD_CONNECT_CKSUM          0x20000000ULL /*support several cksum algos*/
786 #define OBD_CONNECT_FID            0x40000000ULL /*FID is supported by server */
787 #define OBD_CONNECT_VBR            0x80000000ULL /*version based recovery */
788 #define OBD_CONNECT_LOV_V3        0x100000000ULL /*client supports LOV v3 EA */
789 #define OBD_CONNECT_GRANT_SHRINK  0x200000000ULL /* support grant shrink */
790 #define OBD_CONNECT_SKIP_ORPHAN   0x400000000ULL /* don't reuse orphan objids */
791 #define OBD_CONNECT_MAX_EASIZE    0x800000000ULL /* preserved for large EA */
792 #define OBD_CONNECT_FULL20       0x1000000000ULL /* it is 2.0 client */
793 #define OBD_CONNECT_LAYOUTLOCK   0x2000000000ULL /* client uses layout lock */
794 #define OBD_CONNECT_64BITHASH    0x4000000000ULL /* client supports 64-bits
795                                                   * directory hash */
796 #define OBD_CONNECT_MAXBYTES     0x8000000000ULL /* max stripe size */
797 #define OBD_CONNECT_IMP_RECOV   0x10000000000ULL /* imp recovery support */
798 #define OBD_CONNECT_JOBSTATS    0x20000000000ULL /* jobid in ptlrpc_body */
799 #define OBD_CONNECT_UMASK       0x40000000000ULL /* create uses client umask */
800 #define OBD_CONNECT_EINPROGRESS 0x80000000000ULL /* client handles -EINPROGRESS
801                                                   * RPC error properly */
802 #define OBD_CONNECT_GRANT_PARAM 0x100000000000ULL/* extra grant params used for
803                                                   * finer space reservation */
804 #define OBD_CONNECT_FLOCK_OWNER 0x200000000000ULL /* for the fixed 1.8
805                                                    * policy and 2.x server */
806 #define OBD_CONNECT_LVB_TYPE    0x400000000000ULL /* variable type of LVB */
807 #define OBD_CONNECT_NANOSEC_TIME 0x800000000000ULL /* nanosecond timestamps */
808 #define OBD_CONNECT_LIGHTWEIGHT 0x1000000000000ULL/* lightweight connection */
809 #define OBD_CONNECT_SHORTIO     0x2000000000000ULL/* short io */
810 #define OBD_CONNECT_PINGLESS    0x4000000000000ULL/* pings not required */
811 #define OBD_CONNECT_FLOCK_DEAD  0x8000000000000ULL/* improved flock deadlock detection */
812 #define OBD_CONNECT_DISP_STRIPE 0x10000000000000ULL/* create stripe disposition*/
813 #define OBD_CONNECT_OPEN_BY_FID 0x20000000000000ULL /* open by fid won't pack
814                                                        name in request */
815 #define OBD_CONNECT_LFSCK      0x40000000000000ULL/* support online LFSCK */
816 #define OBD_CONNECT_UNLINK_CLOSE 0x100000000000000ULL/* close file in unlink */
817 #define OBD_CONNECT_MULTIMODRPCS 0x200000000000000ULL /* support multiple modify
818                                                          RPCs in parallel */
819 #define OBD_CONNECT_DIR_STRIPE   0x400000000000000ULL /* striped DNE dir */
820 #define OBD_CONNECT_SUBTREE     0x800000000000000ULL /* fileset mount */
821 /* was OBD_CONNECT_LOCKAHEAD_OLD 0x1000000000000000ULL old lockahead 2.12-2.13*/
822
823 /** bulk matchbits is sent within ptlrpc_body */
824 #define OBD_CONNECT_BULK_MBITS   0x2000000000000000ULL
825 #define OBD_CONNECT_OBDOPACK     0x4000000000000000ULL /* compact OUT obdo */
826 #define OBD_CONNECT_FLAGS2       0x8000000000000000ULL /* second flags word */
827 /* ocd_connect_flags2 flags */
828 #define OBD_CONNECT2_FILE_SECCTX         0x1ULL /* set file security context at create */
829 #define OBD_CONNECT2_LOCKAHEAD           0x2ULL /* ladvise lockahead v2 */
830 #define OBD_CONNECT2_DIR_MIGRATE         0x4ULL /* migrate striped dir */
831 #define OBD_CONNECT2_SUM_STATFS         0x8ULL /* MDT return aggregated stats */
832 #define OBD_CONNECT2_OVERSTRIPING       0x10ULL /* OST overstriping support */
833 #define OBD_CONNECT2_FLR                0x20ULL /* FLR support */
834 #define OBD_CONNECT2_WBC_INTENTS        0x40ULL /* create/unlink/... intents for wbc, also operations under client-held parent locks */
835 #define OBD_CONNECT2_LOCK_CONVERT       0x80ULL /* IBITS lock convert support */
836 #define OBD_CONNECT2_ARCHIVE_ID_ARRAY   0x100ULL /* store HSM archive_id in array */
837 #define OBD_CONNECT2_INC_XID            0x200ULL /* Increasing xid */
838 #define OBD_CONNECT2_SELINUX_POLICY     0x400ULL /* has client SELinux policy */
839 #define OBD_CONNECT2_LSOM               0x800ULL /* LSOM support */
840 #define OBD_CONNECT2_PCC                0x1000ULL /* Persistent Client Cache */
841 #define OBD_CONNECT2_CRUSH              0x2000ULL /* crush hash striped directory */
842 #define OBD_CONNECT2_ASYNC_DISCARD      0x4000ULL /* support async DoM data discard */
843 #define OBD_CONNECT2_ENCRYPT            0x8000ULL /* client-to-disk encrypt */
844 #define OBD_CONNECT2_FIDMAP            0x10000ULL /* FID map */
845 #define OBD_CONNECT2_GETATTR_PFID      0x20000ULL /* pack parent FID in getattr */
846 #define OBD_CONNECT2_LSEEK             0x40000ULL /* SEEK_HOLE/DATA RPC */
847 #define OBD_CONNECT2_DOM_LVB           0x80000ULL /* pack DOM glimpse data in LVB */
848 #define OBD_CONNECT2_REP_MBITS        0x100000ULL /* match reply mbits not xid*/
849 #define OBD_CONNECT2_MODE_CONVERT     0x200000ULL /* LDLM mode convert */
850 #define OBD_CONNECT2_BATCH_RPC        0x400000ULL /* Multi-RPC batch request */
851 #define OBD_CONNECT2_PCCRO            0x800000ULL /* Read-only PCC */
852 #define OBD_CONNECT2_ATOMIC_OPEN_LOCK 0x4000000ULL/* request lock on 1st open */
853 /* XXX README XXX:
854  * Please DO NOT add flag values here before first ensuring that this same
855  * flag value is not in use on some other branch.  Please clear any such
856  * changes with senior engineers before starting to use a new flag.  Then,
857  * submit a small patch against EVERY branch that ONLY adds the new flag,
858  * updates obd_connect_names[], adds the flag to check_obd_connect_data(),
859  * and updates wiretests accordingly, so it can be approved and landed easily
860  * to reserve the flag for future use.
861  */
862
863 #define OCD_HAS_FLAG(ocd, flg)  \
864         (!!((ocd)->ocd_connect_flags & OBD_CONNECT_##flg))
865
866
867 #ifdef HAVE_LRU_RESIZE_SUPPORT
868 #define LRU_RESIZE_CONNECT_FLAG OBD_CONNECT_LRU_RESIZE
869 #else
870 #define LRU_RESIZE_CONNECT_FLAG 0
871 #endif
872
873 #define MDT_CONNECT_SUPPORTED  (OBD_CONNECT_RDONLY | OBD_CONNECT_VERSION | \
874                                 OBD_CONNECT_ACL | OBD_CONNECT_XATTR | \
875                                 OBD_CONNECT_IBITS | OBD_CONNECT_NODEVOH | \
876                                 OBD_CONNECT_ATTRFID | OBD_CONNECT_CANCELSET | \
877                                 OBD_CONNECT_AT | OBD_CONNECT_BRW_SIZE | \
878                                 OBD_CONNECT_MDS_MDS | OBD_CONNECT_FID | \
879                                 LRU_RESIZE_CONNECT_FLAG | OBD_CONNECT_VBR | \
880                                 OBD_CONNECT_LOV_V3 | OBD_CONNECT_FULL20 | \
881                                 OBD_CONNECT_64BITHASH | OBD_CONNECT_JOBSTATS | \
882                                 OBD_CONNECT_EINPROGRESS | \
883                                 OBD_CONNECT_LIGHTWEIGHT | OBD_CONNECT_UMASK | \
884                                 OBD_CONNECT_LVB_TYPE | OBD_CONNECT_LAYOUTLOCK |\
885                                 OBD_CONNECT_PINGLESS | OBD_CONNECT_MAX_EASIZE |\
886                                 OBD_CONNECT_FLOCK_DEAD | \
887                                 OBD_CONNECT_DISP_STRIPE | OBD_CONNECT_LFSCK | \
888                                 OBD_CONNECT_OPEN_BY_FID | \
889                                 OBD_CONNECT_DIR_STRIPE | OBD_CONNECT_GRANT | \
890                                 OBD_CONNECT_SRVLOCK | OBD_CONNECT_BULK_MBITS |\
891                                 OBD_CONNECT_CKSUM |\
892                                 OBD_CONNECT_MULTIMODRPCS |\
893                                 OBD_CONNECT_SUBTREE | OBD_CONNECT_LARGE_ACL |\
894                                 OBD_CONNECT_GRANT_PARAM | \
895                                 OBD_CONNECT_GRANT_SHRINK | \
896                                 OBD_CONNECT_SHORTIO | OBD_CONNECT_FLAGS2)
897
898 #define MDT_CONNECT_SUPPORTED2 (OBD_CONNECT2_FILE_SECCTX | \
899                                 OBD_CONNECT2_DIR_MIGRATE | \
900                                 OBD_CONNECT2_SUM_STATFS | \
901                                 OBD_CONNECT2_OVERSTRIPING | \
902                                 OBD_CONNECT2_FLR |\
903                                 OBD_CONNECT2_LOCK_CONVERT | \
904                                 OBD_CONNECT2_ARCHIVE_ID_ARRAY | \
905                                 OBD_CONNECT2_INC_XID | \
906                                 OBD_CONNECT2_SELINUX_POLICY | \
907                                 OBD_CONNECT2_LSOM | \
908                                 OBD_CONNECT2_ASYNC_DISCARD | \
909                                 OBD_CONNECT2_PCC | \
910                                 OBD_CONNECT2_CRUSH | \
911                                 OBD_CONNECT2_ENCRYPT | \
912                                 OBD_CONNECT2_GETATTR_PFID |\
913                                 OBD_CONNECT2_LSEEK | OBD_CONNECT2_DOM_LVB |\
914                                 OBD_CONNECT2_REP_MBITS | \
915                                 OBD_CONNECT2_ATOMIC_OPEN_LOCK)
916
917 #define OST_CONNECT_SUPPORTED  (OBD_CONNECT_SRVLOCK | OBD_CONNECT_GRANT | \
918                                 OBD_CONNECT_REQPORTAL | OBD_CONNECT_VERSION | \
919                                 OBD_CONNECT_INDEX | \
920                                 OBD_CONNECT_BRW_SIZE | OBD_CONNECT_CANCELSET | \
921                                 OBD_CONNECT_AT | LRU_RESIZE_CONNECT_FLAG | \
922                                 OBD_CONNECT_CKSUM | OBD_CONNECT_VBR | \
923                                 OBD_CONNECT_MDS | OBD_CONNECT_SKIP_ORPHAN | \
924                                 OBD_CONNECT_GRANT_SHRINK | OBD_CONNECT_FULL20 |\
925                                 OBD_CONNECT_64BITHASH | OBD_CONNECT_MAXBYTES | \
926                                 OBD_CONNECT_MAX_EASIZE | \
927                                 OBD_CONNECT_EINPROGRESS | \
928                                 OBD_CONNECT_JOBSTATS | \
929                                 OBD_CONNECT_LIGHTWEIGHT | OBD_CONNECT_LVB_TYPE|\
930                                 OBD_CONNECT_LAYOUTLOCK | OBD_CONNECT_FID | \
931                                 OBD_CONNECT_PINGLESS | OBD_CONNECT_LFSCK | \
932                                 OBD_CONNECT_BULK_MBITS | \
933                                 OBD_CONNECT_GRANT_PARAM | \
934                                 OBD_CONNECT_SHORTIO | OBD_CONNECT_FLAGS2)
935
936 #define OST_CONNECT_SUPPORTED2 (OBD_CONNECT2_LOCKAHEAD | OBD_CONNECT2_INC_XID |\
937                                 OBD_CONNECT2_ENCRYPT | OBD_CONNECT2_LSEEK |\
938                                 OBD_CONNECT2_REP_MBITS)
939
940 #define ECHO_CONNECT_SUPPORTED (OBD_CONNECT_FID | OBD_CONNECT_FLAGS2)
941 #define ECHO_CONNECT_SUPPORTED2 OBD_CONNECT2_REP_MBITS
942
943 #define MGS_CONNECT_SUPPORTED  (OBD_CONNECT_VERSION | OBD_CONNECT_AT | \
944                                 OBD_CONNECT_FULL20 | OBD_CONNECT_IMP_RECOV | \
945                                 OBD_CONNECT_PINGLESS |\
946                                 OBD_CONNECT_BULK_MBITS | OBD_CONNECT_BARRIER | \
947                                 OBD_CONNECT_FLAGS2)
948
949 #define MGS_CONNECT_SUPPORTED2 OBD_CONNECT2_REP_MBITS
950
951 /* Features required for this version of the client to work with server */
952 #define CLIENT_CONNECT_MDT_REQD (OBD_CONNECT_FID |      \
953                                  OBD_CONNECT_ATTRFID |  \
954                                  OBD_CONNECT_FULL20)
955
956 /* This structure is used for both request and reply.
957  *
958  * If we eventually have separate connect data for different types, which we
959  * almost certainly will, then perhaps we stick a union in here. */
960 struct obd_connect_data {
961         __u64 ocd_connect_flags; /* OBD_CONNECT_* per above */
962         __u32 ocd_version;       /* lustre release version number */
963         __u32 ocd_grant;         /* initial cache grant amount (bytes) */
964         __u32 ocd_index;         /* LOV index to connect to */
965         __u32 ocd_brw_size;      /* Maximum BRW size in bytes */
966         __u64 ocd_ibits_known;   /* inode bits this client understands */
967         __u8  ocd_grant_blkbits; /* log2 of the backend filesystem blocksize */
968         __u8  ocd_grant_inobits; /* log2 of the per-inode space consumption */
969         __u16 ocd_grant_tax_kb;  /* extent insertion overhead, in 1K blocks */
970         __u32 ocd_grant_max_blks;/* maximum number of blocks per extent */
971         __u64 ocd_transno;       /* first transno from client to be replayed */
972         __u32 ocd_group;         /* MDS group on OST */
973         __u32 ocd_cksum_types;   /* supported checksum algorithms */
974         __u32 ocd_max_easize;    /* How big LOV EA can be on MDS */
975         __u32 ocd_instance;      /* instance # of this target */
976         __u64 ocd_maxbytes;      /* Maximum stripe size in bytes */
977         /* Fields after ocd_maxbytes are only accessible by the receiver
978          * if the corresponding flag in ocd_connect_flags is set. Accessing
979          * any field after ocd_maxbytes on the receiver without a valid flag
980          * may result in out-of-bound memory access and kernel oops. */
981         __u16 ocd_maxmodrpcs;    /* Maximum modify RPCs in parallel */
982         __u16 padding0;          /* added 2.1.0. also fix lustre_swab_connect */
983         __u32 padding1;          /* added 2.1.0. also fix lustre_swab_connect */
984         __u64 ocd_connect_flags2;
985         __u64 padding3;          /* added 2.1.0. also fix lustre_swab_connect */
986         __u64 padding4;          /* added 2.1.0. also fix lustre_swab_connect */
987         __u64 padding5;          /* added 2.1.0. also fix lustre_swab_connect */
988         __u64 padding6;          /* added 2.1.0. also fix lustre_swab_connect */
989         __u64 padding7;          /* added 2.1.0. also fix lustre_swab_connect */
990         __u64 padding8;          /* added 2.1.0. also fix lustre_swab_connect */
991         __u64 padding9;          /* added 2.1.0. also fix lustre_swab_connect */
992         __u64 paddingA;          /* added 2.1.0. also fix lustre_swab_connect */
993         __u64 paddingB;          /* added 2.1.0. also fix lustre_swab_connect */
994         __u64 paddingC;          /* added 2.1.0. also fix lustre_swab_connect */
995         __u64 paddingD;          /* added 2.1.0. also fix lustre_swab_connect */
996         __u64 paddingE;          /* added 2.1.0. also fix lustre_swab_connect */
997         __u64 paddingF;          /* added 2.1.0. also fix lustre_swab_connect */
998 };
999 /* XXX README XXX:
1000  * Please DO NOT use any fields here before first ensuring that this same
1001  * field is not in use on some other branch.  Please clear any such changes
1002  * with senior engineers before starting to use a new field.  Then, submit
1003  * a small patch against EVERY branch that ONLY adds the new field along with
1004  * the matching OBD_CONNECT flag, so that can be approved and landed easily to
1005  * reserve the flag for future use. */
1006
1007 /*
1008  * Supported checksum algorithms. Up to 32 checksum types are supported.
1009  * (32-bit mask stored in obd_connect_data::ocd_cksum_types)
1010  * Please update DECLARE_CKSUM_NAME in obd_cksum.h when adding a new
1011  * algorithm and also the OBD_FL_CKSUM* flags, OBD_CKSUM_ALL flag,
1012  * OBD_FL_CKSUM_ALL flag and potentially OBD_CKSUM_T10_ALL flag.
1013  */
1014 enum cksum_types {
1015         OBD_CKSUM_CRC32         = 0x00000001,
1016         OBD_CKSUM_ADLER         = 0x00000002,
1017         OBD_CKSUM_CRC32C        = 0x00000004,
1018         OBD_CKSUM_RESERVED      = 0x00000008,
1019         OBD_CKSUM_T10IP512      = 0x00000010,
1020         OBD_CKSUM_T10IP4K       = 0x00000020,
1021         OBD_CKSUM_T10CRC512     = 0x00000040,
1022         OBD_CKSUM_T10CRC4K      = 0x00000080,
1023 };
1024
1025 #define OBD_CKSUM_T10_ALL (OBD_CKSUM_T10IP512 | OBD_CKSUM_T10IP4K | \
1026         OBD_CKSUM_T10CRC512 | OBD_CKSUM_T10CRC4K)
1027
1028 #define OBD_CKSUM_ALL (OBD_CKSUM_CRC32 | OBD_CKSUM_ADLER | OBD_CKSUM_CRC32C | \
1029                        OBD_CKSUM_T10_ALL)
1030
1031 /*
1032  * The default checksum algorithm used on top of T10PI GRD tags for RPC.
1033  * Considering that the checksum-of-checksums is only computing CRC32 on a
1034  * 4KB chunk of GRD tags for a 1MB RPC for 512B sectors, or 16KB of GRD
1035  * tags for 16MB of 4KB sectors, this is only 1/256 or 1/1024 of the
1036  * total data being checksummed, so the checksum type used here should not
1037  * affect overall system performance noticeably.
1038  */
1039 #define OBD_CKSUM_T10_TOP OBD_CKSUM_ADLER
1040
1041 /*
1042  *   OST requests: OBDO & OBD request records
1043  */
1044
1045 /* opcodes */
1046 enum ost_cmd {
1047         OST_REPLY      =  0,       /* reply ? */
1048         OST_GETATTR    =  1,
1049         OST_SETATTR    =  2,
1050         OST_READ       =  3,
1051         OST_WRITE      =  4,
1052         OST_CREATE     =  5,
1053         OST_DESTROY    =  6,
1054         OST_GET_INFO   =  7,
1055         OST_CONNECT    =  8,
1056         OST_DISCONNECT =  9,
1057         OST_PUNCH      = 10,
1058         OST_OPEN       = 11,
1059         OST_CLOSE      = 12,
1060         OST_STATFS     = 13,
1061         OST_SYNC       = 16,
1062         OST_SET_INFO   = 17,
1063         OST_QUOTACHECK = 18, /* not used since 2.4 */
1064         OST_QUOTACTL   = 19,
1065         OST_QUOTA_ADJUST_QUNIT = 20, /* not used since 2.4 */
1066         OST_LADVISE    = 21,
1067         OST_FALLOCATE  = 22,
1068         OST_SEEK       = 23,
1069         OST_LAST_OPC /* must be < 33 to avoid MDS_GETATTR */
1070 };
1071 #define OST_FIRST_OPC  OST_REPLY
1072
1073 enum obdo_flags {
1074         OBD_FL_INLINEDATA   = 0x00000001,
1075         OBD_FL_OBDMDEXISTS  = 0x00000002,
1076         OBD_FL_DELORPHAN    = 0x00000004, /* if set in o_flags delete orphans */
1077         OBD_FL_NORPC        = 0x00000008, /* set in o_flags do in OSC not OST */
1078         OBD_FL_IDONLY       = 0x00000010, /* set in o_flags only adjust obj id*/
1079         OBD_FL_RECREATE_OBJS= 0x00000020, /* recreate missing obj */
1080         OBD_FL_DEBUG_CHECK  = 0x00000040, /* echo client/server debug check */
1081         OBD_FL_NO_PRJQUOTA  = 0x00000080, /* the object's project is over
1082                                            * quota */
1083         OBD_FL_NO_USRQUOTA  = 0x00000100, /* the object's owner is over quota */
1084         OBD_FL_NO_GRPQUOTA  = 0x00000200, /* the object's group is over quota */
1085         OBD_FL_CREATE_CROW  = 0x00000400, /* object should be create on write */
1086         OBD_FL_SRVLOCK      = 0x00000800, /* delegate DLM locking to server */
1087         OBD_FL_CKSUM_CRC32  = 0x00001000, /* CRC32 checksum type */
1088         OBD_FL_CKSUM_ADLER  = 0x00002000, /* ADLER checksum type */
1089         OBD_FL_CKSUM_CRC32C = 0x00004000, /* CRC32C checksum type */
1090         OBD_FL_CKSUM_T10IP512  = 0x00005000, /* T10PI IP cksum, 512B sector */
1091         OBD_FL_CKSUM_T10IP4K   = 0x00006000, /* T10PI IP cksum, 4KB sector */
1092         OBD_FL_CKSUM_T10CRC512 = 0x00007000, /* T10PI CRC cksum, 512B sector */
1093         OBD_FL_CKSUM_T10CRC4K  = 0x00008000, /* T10PI CRC cksum, 4KB sector */
1094         OBD_FL_CKSUM_RSVD3  = 0x00010000, /* for future cksum types */
1095         OBD_FL_SHRINK_GRANT = 0x00020000, /* object shrink the grant */
1096         OBD_FL_MMAP         = 0x00040000, /* object is mmapped on the client.
1097                                            * XXX: obsoleted - reserved for old
1098                                            * clients prior than 2.2 */
1099         OBD_FL_RECOV_RESEND = 0x00080000, /* recoverable resent */
1100         OBD_FL_NOSPC_BLK    = 0x00100000, /* no more block space on OST */
1101         OBD_FL_FLUSH        = 0x00200000, /* flush pages on the OST */
1102         OBD_FL_SHORT_IO     = 0x00400000, /* short io request */
1103         OBD_FL_ROOT_SQUASH  = 0x00800000, /* root squash */
1104         /* OBD_FL_LOCAL_MASK = 0xF0000000, was local-only flags until 2.10 */
1105
1106         /*
1107          * Note that while the original checksum values were separate bits,
1108          * in 2.x we can actually allow all values from 1-31. T10-PI checksum
1109          * types already use values which are not separate bits.
1110          */
1111         OBD_FL_CKSUM_ALL    = OBD_FL_CKSUM_CRC32 | OBD_FL_CKSUM_ADLER |
1112                               OBD_FL_CKSUM_CRC32C | OBD_FL_CKSUM_T10IP512 |
1113                               OBD_FL_CKSUM_T10IP4K | OBD_FL_CKSUM_T10CRC512 |
1114                               OBD_FL_CKSUM_T10CRC4K,
1115
1116         OBD_FL_NO_QUOTA_ALL = OBD_FL_NO_USRQUOTA | OBD_FL_NO_GRPQUOTA |
1117                               OBD_FL_NO_PRJQUOTA,
1118 };
1119
1120 /*
1121  * All LOV EA magics should have the same postfix, if some new version
1122  * Lustre instroduces new LOV EA magic, then when down-grade to an old
1123  * Lustre, even though the old version system does not recognizes such
1124  * new magic, it still can distinguish the corrupted cases by checking
1125  * the magic's postfix.
1126  */
1127 #define LOV_MAGIC_MAGIC 0x0BD0
1128 #define LOV_MAGIC_MASK  0xFFFF
1129
1130 #define LOV_MAGIC_V1            (0x0BD10000 | LOV_MAGIC_MAGIC)
1131 #define LOV_MAGIC_JOIN_V1       (0x0BD20000 | LOV_MAGIC_MAGIC)
1132 #define LOV_MAGIC_V3            (0x0BD30000 | LOV_MAGIC_MAGIC)
1133 #define LOV_MAGIC_MIGRATE       (0x0BD40000 | LOV_MAGIC_MAGIC)
1134 /* reserved for specifying OSTs */
1135 #define LOV_MAGIC_SPECIFIC      (0x0BD50000 | LOV_MAGIC_MAGIC)
1136 #define LOV_MAGIC               LOV_MAGIC_V1
1137 #define LOV_MAGIC_COMP_V1       (0x0BD60000 | LOV_MAGIC_MAGIC)
1138 #define LOV_MAGIC_FOREIGN       (0x0BD70000 | LOV_MAGIC_MAGIC)
1139 #define LOV_MAGIC_SEL           (0x0BD80000 | LOV_MAGIC_MAGIC)
1140
1141 /*
1142  * magic for fully defined striping
1143  * the idea is that we should have different magics for striping "hints"
1144  * (struct lov_user_md_v[13]) and defined ready-to-use striping (struct
1145  * lov_mds_md_v[13]). at the moment the magics are used in wire protocol,
1146  * we can't just change it w/o long way preparation, but we still need a
1147  * mechanism to allow LOD to differentiate hint versus ready striping.
1148  * so, at the moment we do a trick: MDT knows what to expect from request
1149  * depending on the case (replay uses ready striping, non-replay req uses
1150  * hints), so MDT replaces magic with appropriate one and now LOD can
1151  * easily understand what's inside -bzzz
1152  *
1153  * those *_DEF magics are only used on server side internally, they
1154  * won't be put on wire or disk.
1155  */
1156 #define LOV_MAGIC_DEFINED               0x10000000
1157 #define LOV_MAGIC_V1_DEFINED            (LOV_MAGIC_DEFINED | LOV_MAGIC_V1)
1158 #define LOV_MAGIC_V3_DEFINED            (LOV_MAGIC_DEFINED | LOV_MAGIC_V3)
1159 #define LOV_MAGIC_COMP_V1_DEFINED       (LOV_MAGIC_DEFINED | LOV_MAGIC_COMP_V1)
1160
1161 #define lov_pattern(pattern)            (pattern & ~LOV_PATTERN_F_MASK)
1162 #define lov_pattern_flags(pattern)      (pattern & LOV_PATTERN_F_MASK)
1163
1164 #define lov_ost_data lov_ost_data_v1
1165 struct lov_ost_data_v1 {          /* per-stripe data structure (little-endian)*/
1166         struct ost_id l_ost_oi;   /* OST object ID */
1167         __u32 l_ost_gen;          /* generation of this l_ost_idx */
1168         __u32 l_ost_idx;          /* OST index in LOV (lov_tgt_desc->tgts) */
1169 };
1170
1171 #define lov_mds_md lov_mds_md_v1
1172 struct lov_mds_md_v1 {            /* LOV EA mds/wire data (little-endian) */
1173         __u32 lmm_magic;          /* magic number = LOV_MAGIC_V1 */
1174         __u32 lmm_pattern;        /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1175         struct ost_id   lmm_oi;   /* LOV object ID */
1176         __u32 lmm_stripe_size;    /* size of stripe in bytes */
1177         /* lmm_stripe_count used to be __u32 */
1178         __u16 lmm_stripe_count;   /* num stripes in use for this object */
1179         __u16 lmm_layout_gen;     /* layout generation number */
1180         struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1181 };
1182
1183 #define MAX_MD_SIZE_OLD (sizeof(struct lov_mds_md) +                    \
1184                          4 * sizeof(struct lov_ost_data))
1185 #define MAX_MD_SIZE (sizeof(struct lov_comp_md_v1) +                    \
1186                      4 * (sizeof(struct lov_comp_md_entry_v1) +         \
1187                           MAX_MD_SIZE_OLD))
1188 #define MIN_MD_SIZE (sizeof(struct lov_mds_md) + 1 * sizeof(struct lov_ost_data))
1189
1190 /* This is the default MDT reply size allocated, should the striping be bigger,
1191  * it will be reallocated in mdt_fix_reply.
1192  * 100 stripes is a bit less than 2.5k of data */
1193 #define DEF_REP_MD_SIZE (sizeof(struct lov_mds_md) + \
1194                          100 * sizeof(struct lov_ost_data))
1195
1196 #define XATTR_NAME_ACL_ACCESS   "system.posix_acl_access"
1197 #define XATTR_NAME_ACL_DEFAULT  "system.posix_acl_default"
1198 #define XATTR_USER_PREFIX       "user."
1199 #define XATTR_TRUSTED_PREFIX    "trusted."
1200 #define XATTR_SECURITY_PREFIX   "security."
1201
1202 #define XATTR_NAME_SOM          "trusted.som"
1203 #define XATTR_NAME_LOV          "trusted.lov"
1204 #define XATTR_NAME_LMA          "trusted.lma"
1205 #define XATTR_NAME_LMV          "trusted.lmv"
1206 #define XATTR_NAME_DEFAULT_LMV  "trusted.dmv"
1207 #define XATTR_NAME_LINK         "trusted.link"
1208 #define XATTR_NAME_FID          "trusted.fid"
1209 #define XATTR_NAME_VERSION      "trusted.version"
1210 #define XATTR_NAME_SOM          "trusted.som"
1211 #define XATTR_NAME_HSM          "trusted.hsm"
1212 #define XATTR_NAME_LFSCK_BITMAP "trusted.lfsck_bitmap"
1213 #define XATTR_NAME_DUMMY        "trusted.dummy"
1214 #define XATTR_NAME_PROJID       "trusted.projid"
1215
1216 #define LL_XATTR_NAME_ENCRYPTION_CONTEXT XATTR_SECURITY_PREFIX"c"
1217
1218 #define XATTR_NAME_LFSCK_NAMESPACE "trusted.lfsck_ns"
1219 #define XATTR_NAME_MAX_LEN      32 /* increase this, if there is longer name. */
1220
1221 struct lov_mds_md_v3 {            /* LOV EA mds/wire data (little-endian) */
1222         __u32 lmm_magic;          /* magic number = LOV_MAGIC_V3 */
1223         __u32 lmm_pattern;        /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1224         struct ost_id   lmm_oi;   /* LOV object ID */
1225         __u32 lmm_stripe_size;    /* size of stripe in bytes */
1226         /* lmm_stripe_count used to be __u32 */
1227         __u16 lmm_stripe_count;   /* num stripes in use for this object */
1228         __u16 lmm_layout_gen;     /* layout generation number */
1229         char  lmm_pool_name[LOV_MAXPOOLNAME + 1]; /* must be 32bit aligned */
1230         struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1231 };
1232
1233 static inline __u32 lov_mds_md_size(__u16 stripes, __u32 lmm_magic)
1234 {
1235         if (stripes == (__u16)-1)
1236                 stripes = 0;
1237
1238         if (lmm_magic == LOV_MAGIC_V3)
1239                 return sizeof(struct lov_mds_md_v3) +
1240                                 stripes * sizeof(struct lov_ost_data_v1);
1241         else
1242                 return sizeof(struct lov_mds_md_v1) +
1243                                 stripes * sizeof(struct lov_ost_data_v1);
1244 }
1245
1246 static inline __u32
1247 lov_mds_md_max_stripe_count(__kernel_size_t buf_size, __u32 lmm_magic)
1248 {
1249         switch (lmm_magic) {
1250         case LOV_MAGIC_V1: {
1251                 struct lov_mds_md_v1 lmm;
1252
1253                 if (buf_size < sizeof(lmm))
1254                         return 0;
1255
1256                 return (buf_size - sizeof(lmm)) / sizeof(lmm.lmm_objects[0]);
1257         }
1258         case LOV_MAGIC_V3: {
1259                 struct lov_mds_md_v3 lmm;
1260
1261                 if (buf_size < sizeof(lmm))
1262                         return 0;
1263
1264                 return (buf_size - sizeof(lmm)) / sizeof(lmm.lmm_objects[0]);
1265         }
1266         default:
1267                 return 0;
1268         }
1269 }
1270
1271 #define OBD_MD_FLID        (0x00000001ULL) /* object ID */
1272 #define OBD_MD_FLATIME     (0x00000002ULL) /* access time */
1273 #define OBD_MD_FLMTIME     (0x00000004ULL) /* data modification time */
1274 #define OBD_MD_FLCTIME     (0x00000008ULL) /* change time */
1275 #define OBD_MD_FLSIZE      (0x00000010ULL) /* size */
1276 #define OBD_MD_FLBLOCKS    (0x00000020ULL) /* allocated blocks count */
1277 #define OBD_MD_FLBLKSZ     (0x00000040ULL) /* block size */
1278 #define OBD_MD_FLMODE      (0x00000080ULL) /* access bits (mode & ~S_IFMT) */
1279 #define OBD_MD_FLTYPE      (0x00000100ULL) /* object type (mode & S_IFMT) */
1280 #define OBD_MD_FLUID       (0x00000200ULL) /* user ID */
1281 #define OBD_MD_FLGID       (0x00000400ULL) /* group ID */
1282 #define OBD_MD_FLFLAGS     (0x00000800ULL) /* flags word */
1283 #define OBD_MD_DOM_SIZE    (0X00001000ULL) /* Data-on-MDT component size */
1284 #define OBD_MD_FLNLINK     (0x00002000ULL) /* link count */
1285 #define OBD_MD_FLPARENT    (0x00004000ULL) /* parent FID */
1286 #define OBD_MD_LAYOUT_VERSION (0x00008000ULL) /* OST object layout version */
1287 #define OBD_MD_FLRDEV      (0x00010000ULL) /* device number */
1288 #define OBD_MD_FLEASIZE    (0x00020000ULL) /* extended attribute data */
1289 #define OBD_MD_LINKNAME    (0x00040000ULL) /* symbolic link target */
1290 #define OBD_MD_FLHANDLE    (0x00080000ULL) /* file/lock handle */
1291 #define OBD_MD_FLCKSUM     (0x00100000ULL) /* bulk data checksum */
1292 /*      OBD_MD_FLQOS       (0x00200000ULL) has never been used */
1293 /*      OBD_MD_FLCOOKIE    (0x00800000ULL) obsolete in 2.8 */
1294 #define OBD_MD_FLPRJQUOTA  (0x00400000ULL) /* over quota flags sent from ost */
1295 #define OBD_MD_FLGROUP     (0x01000000ULL) /* group */
1296 #define OBD_MD_FLFID       (0x02000000ULL) /* ->ost write inline fid */
1297 /*      OBD_MD_FLEPOCH     (0x04000000ULL) obsolete 2.7.50 */
1298                                            /* ->mds if epoch opens or closes */
1299 #define OBD_MD_FLGRANT     (0x08000000ULL) /* ost preallocation space grant */
1300 #define OBD_MD_FLDIREA     (0x10000000ULL) /* dir's extended attribute data */
1301 #define OBD_MD_FLUSRQUOTA  (0x20000000ULL) /* over quota flags sent from ost */
1302 #define OBD_MD_FLGRPQUOTA  (0x40000000ULL) /* over quota flags sent from ost */
1303 #define OBD_MD_FLMODEASIZE (0x80000000ULL) /* EA size will be changed */
1304
1305 #define OBD_MD_MDS         (0x0000000100000000ULL) /* where an inode lives on */
1306 /*      OBD_MD_REINT       (0x0000000200000000ULL) obsolete 1.8 */
1307 #define OBD_MD_MEA         (0x0000000400000000ULL) /* CMD split EA  */
1308 #define OBD_MD_TSTATE      (0x0000000800000000ULL) /* transient state field */
1309
1310 #define OBD_MD_FLXATTR       (0x0000001000000000ULL) /* xattr */
1311 #define OBD_MD_FLXATTRLS     (0x0000002000000000ULL) /* xattr list */
1312 #define OBD_MD_FLXATTRRM     (0x0000004000000000ULL) /* xattr remove */
1313 #define OBD_MD_FLACL         (0x0000008000000000ULL) /* ACL */
1314 #define OBD_MD_FLAGSTATFS    (0x0000010000000000ULL) /* aggregated statfs */
1315 /*      OBD_MD_FLMDSCAPA     (0x0000020000000000ULL) obsolete 2.7.54 */
1316 /*      OBD_MD_FLOSSCAPA     (0x0000040000000000ULL) obsolete 2.7.54 */
1317 /*      OBD_MD_FLCKSPLIT     (0x0000080000000000ULL) obsolete 2.3.58*/
1318 #define OBD_MD_FLCROSSREF    (0x0000100000000000ULL) /* Cross-ref case */
1319 #define OBD_MD_FLGETATTRLOCK (0x0000200000000000ULL) /* Get IOEpoch attributes
1320                                                       * under lock; for xattr
1321                                                       * requests means the
1322                                                       * client holds the lock */
1323 #define OBD_MD_FLOBJCOUNT    (0x0000400000000000ULL) /* for multiple destroy */
1324
1325 #define OBD_MD_FLDATAVERSION (0x0010000000000000ULL) /* iversion sum */
1326 #define OBD_MD_CLOSE_INTENT_EXECED (0x0020000000000000ULL) /* close intent
1327                                                               executed */
1328
1329 #define OBD_MD_DEFAULT_MEA   (0x0040000000000000ULL) /* default MEA */
1330 #define OBD_MD_FLOSTLAYOUT   (0x0080000000000000ULL) /* contain ost_layout */
1331 #define OBD_MD_FLPROJID      (0x0100000000000000ULL) /* project ID */
1332 #define OBD_MD_SECCTX        (0x0200000000000000ULL) /* embed security xattr */
1333 #define OBD_MD_FLLAZYSIZE    (0x0400000000000000ULL) /* Lazy size */
1334 #define OBD_MD_FLLAZYBLOCKS  (0x0800000000000000ULL) /* Lazy blocks */
1335 #define OBD_MD_FLBTIME       (0x1000000000000000ULL) /* birth time */
1336 #define OBD_MD_ENCCTX        (0x2000000000000000ULL) /* embed encryption ctx */
1337 #define OBD_MD_NAMEHASH      (0x4000000000000000ULL) /* use hash instead of name
1338                                                       * in case of encryption
1339                                                       */
1340
1341 #define OBD_MD_FLALLQUOTA (OBD_MD_FLUSRQUOTA | \
1342                            OBD_MD_FLGRPQUOTA | \
1343                            OBD_MD_FLPRJQUOTA)
1344
1345 #define OBD_MD_FLGETATTR (OBD_MD_FLID    | OBD_MD_FLATIME | OBD_MD_FLMTIME | \
1346                           OBD_MD_FLCTIME | OBD_MD_FLSIZE  | OBD_MD_FLBLKSZ | \
1347                           OBD_MD_FLMODE  | OBD_MD_FLTYPE  | OBD_MD_FLUID   | \
1348                           OBD_MD_FLGID   | OBD_MD_FLFLAGS | OBD_MD_FLNLINK | \
1349                           OBD_MD_FLPARENT | OBD_MD_FLRDEV  | OBD_MD_FLGROUP | \
1350                           OBD_MD_FLPROJID | OBD_MD_FLBTIME)
1351
1352 #define OBD_MD_FLXATTRALL (OBD_MD_FLXATTR | OBD_MD_FLXATTRLS)
1353
1354 /* don't forget obdo_fid which is way down at the bottom so it can
1355  * come after the definition of llog_cookie */
1356
1357 enum hss_valid {
1358         HSS_SETMASK     = 0x01,
1359         HSS_CLEARMASK   = 0x02,
1360         HSS_ARCHIVE_ID  = 0x04,
1361 };
1362
1363 struct hsm_state_set {
1364         __u32   hss_valid;
1365         __u32   hss_archive_id;
1366         __u64   hss_setmask;
1367         __u64   hss_clearmask;
1368 };
1369
1370 /* ost_body.data values for OST_BRW */
1371
1372 #define OBD_BRW_READ            0x01
1373 #define OBD_BRW_WRITE           0x02
1374 #define OBD_BRW_RWMASK          (OBD_BRW_READ | OBD_BRW_WRITE)
1375 #define OBD_BRW_NDELAY          0x04 /* Non-delay RPC should be issued for
1376                                       * this page. Non-delay RPCs have bit
1377                                       * rq_no_delay set. */
1378 #define OBD_BRW_SYNC            0x08 /* this page is a part of synchronous
1379                                       * transfer and is not accounted in
1380                                       * the grant. */
1381 #define OBD_BRW_CHECK           0x10
1382 #define OBD_BRW_FROM_GRANT      0x20 /* the osc manages this under llite */
1383 #define OBD_BRW_GRANTED         0x40 /* the ost manages this */
1384 /* OBD_BRW_NOCACHE is currently neither set nor tested */
1385 #define OBD_BRW_NOCACHE         0x80 /* this page is a part of non-cached IO */
1386 #define OBD_BRW_NOQUOTA        0x100 /* do not enforce quota */
1387 #define OBD_BRW_SRVLOCK        0x200 /* Client holds no lock over this page */
1388 #define OBD_BRW_ASYNC          0x400 /* Server may delay commit to disk */
1389 #define OBD_BRW_MEMALLOC       0x800 /* Client runs in the "kswapd" context */
1390 #define OBD_BRW_OVER_USRQUOTA 0x1000 /* Running out of user quota */
1391 #define OBD_BRW_OVER_GRPQUOTA 0x2000 /* Running out of group quota */
1392 #define OBD_BRW_SOFT_SYNC     0x4000 /* This flag notifies the server
1393                                       * that the client is running low on
1394                                       * space for unstable pages; asking
1395                                       * it to sync quickly */
1396 #define OBD_BRW_OVER_PRJQUOTA 0x8000 /* Running out of project quota */
1397 #define OBD_BRW_RDMA_ONLY    0x20000 /* RPC contains RDMA-only pages*/
1398 #define OBD_BRW_SYS_RESOURCE 0x40000 /* page has CAP_SYS_RESOURCE */
1399
1400 #define OBD_BRW_OVER_ALLQUOTA (OBD_BRW_OVER_USRQUOTA | \
1401                                OBD_BRW_OVER_GRPQUOTA | \
1402                                OBD_BRW_OVER_PRJQUOTA)
1403
1404 #define OBD_BRW_DONE    0x40000000UL   /*
1405                                         * osd-ldiskfs inernal,
1406                                         * IO has been issued before
1407                                         */
1408 #define OBD_BRW_LOCAL1  0x80000000UL    /*
1409                                          * osd-ldiskfs internal,
1410                                          * page mapped to real block
1411                                          */
1412
1413 #define OBD_BRW_LOCALS (OBD_BRW_LOCAL1 | OBD_BRW_DONE)
1414
1415 #define OBD_MAX_GRANT 0x7fffffffUL /* Max grant allowed to one client: 2 GiB */
1416
1417 #define OBD_OBJECT_EOF LUSTRE_EOF
1418
1419 #define OST_MIN_PRECREATE 32
1420 #define OST_MAX_PRECREATE 20000
1421
1422 struct obd_ioobj {
1423         struct ost_id   ioo_oid;        /* object ID, if multi-obj BRW */
1424         __u32           ioo_max_brw;    /* low 16 bits were o_mode before 2.4,
1425                                          * now (PTLRPC_BULK_OPS_COUNT - 1) in
1426                                          * high 16 bits in 2.4 and later */
1427         __u32           ioo_bufcnt;     /* number of niobufs for this object */
1428 };
1429
1430 /* NOTE: IOOBJ_MAX_BRW_BITS defines the _offset_ of the max_brw field in
1431  * ioo_max_brw, NOT the maximum number of bits in PTLRPC_BULK_OPS_BITS.
1432  * That said, ioo_max_brw is a 32-bit field so the limit is also 16 bits. */
1433 #define IOOBJ_MAX_BRW_BITS      16
1434 #define ioobj_max_brw_get(ioo)  (((ioo)->ioo_max_brw >> IOOBJ_MAX_BRW_BITS) + 1)
1435 #define ioobj_max_brw_set(ioo, num)                                     \
1436 do { (ioo)->ioo_max_brw = ((num) - 1) << IOOBJ_MAX_BRW_BITS; } while (0)
1437
1438 /* multiple of 8 bytes => can array */
1439 struct niobuf_remote {
1440         __u64   rnb_offset;
1441         __u32   rnb_len;
1442         __u32   rnb_flags;
1443 };
1444
1445 /* lock value block communicated between the filter and llite */
1446
1447 /* OST_LVB_ERR_INIT is needed because the return code in rc is
1448  * negative, i.e. because ((MASK + rc) & MASK) != MASK. */
1449 #define OST_LVB_ERR_INIT 0xffbadbad80000000ULL
1450 #define OST_LVB_ERR_MASK 0xffbadbad00000000ULL
1451 #define OST_LVB_IS_ERR(blocks)                                          \
1452         ((blocks & OST_LVB_ERR_MASK) == OST_LVB_ERR_MASK)
1453 #define OST_LVB_SET_ERR(blocks, rc)                                     \
1454         do { blocks = OST_LVB_ERR_INIT + rc; } while (0)
1455 #define OST_LVB_GET_ERR(blocks)    (int)(blocks - OST_LVB_ERR_INIT)
1456
1457 struct ost_lvb_v1 {
1458         __u64   lvb_size;
1459         __s64   lvb_mtime;
1460         __s64   lvb_atime;
1461         __s64   lvb_ctime;
1462         __u64   lvb_blocks;
1463 };
1464
1465 struct ost_lvb {
1466         __u64   lvb_size;
1467         __s64   lvb_mtime;
1468         __s64   lvb_atime;
1469         __s64   lvb_ctime;
1470         __u64   lvb_blocks;
1471         __u32   lvb_mtime_ns;
1472         __u32   lvb_atime_ns;
1473         __u32   lvb_ctime_ns;
1474         __u32   lvb_padding;
1475 };
1476
1477 /*
1478  *   lquota data structures
1479  */
1480
1481 /* The lquota_id structure is an union of all the possible identifier types that
1482  * can be used with quota, this includes:
1483  * - 64-bit user ID
1484  * - 64-bit group ID
1485  * - a FID which can be used for per-directory quota in the future */
1486 union lquota_id {
1487         struct lu_fid   qid_fid; /* FID for per-directory quota */
1488         __u64           qid_uid; /* user identifier */
1489         __u64           qid_gid; /* group identifier */
1490         __u64           qid_projid; /* project identifier */
1491 };
1492
1493 /* quotactl management */
1494 struct obd_quotactl {
1495         __u32                   qc_cmd;
1496         __u32                   qc_type; /* see Q_* flag below */
1497         __u32                   qc_id;
1498         __u32                   qc_stat;
1499         struct obd_dqinfo       qc_dqinfo;
1500         struct obd_dqblk        qc_dqblk;
1501         char                    qc_poolname[0];
1502 };
1503
1504 #define Q_COPY(out, in, member) (out)->member = (in)->member
1505
1506 #define QCTL_COPY(out, in)                              \
1507 do {                                                    \
1508         Q_COPY(out, in, qc_cmd);                        \
1509         Q_COPY(out, in, qc_type);                       \
1510         Q_COPY(out, in, qc_id);                         \
1511         Q_COPY(out, in, qc_stat);                       \
1512         Q_COPY(out, in, qc_dqinfo);                     \
1513         Q_COPY(out, in, qc_dqblk);                      \
1514         if (LUSTRE_Q_CMD_IS_POOL(in->qc_cmd))           \
1515                 memcpy(out->qc_poolname,                \
1516                        in->qc_poolname,                 \
1517                        LOV_MAXPOOLNAME + 1);            \
1518 } while (0)
1519
1520 /* Body of quota request used for quota acquire/release RPCs between quota
1521  * master (aka QMT) and slaves (ak QSD). */
1522 struct quota_body {
1523         struct lu_fid   qb_fid;     /* FID of global index packing the pool ID
1524                                       * and type (data or metadata) as well as
1525                                       * the quota type (user or group). */
1526         union lquota_id qb_id;      /* uid or gid or directory FID */
1527         __u32           qb_flags;   /* see below */
1528         __u32           qb_padding;
1529         __u64           qb_count;   /* acquire/release count (kbytes/inodes) */
1530         __u64           qb_usage;   /* current slave usage (kbytes/inodes) */
1531         __u64           qb_slv_ver; /* slave index file version */
1532         struct lustre_handle    qb_lockh;     /* per-ID lock handle */
1533         struct lustre_handle    qb_glb_lockh; /* global lock handle */
1534         __u64           qb_padding1[4];
1535 };
1536
1537 /* When the quota_body is used in the reply of quota global intent
1538  * lock (IT_QUOTA_CONN) reply, qb_fid contains slave index file FID. */
1539 #define qb_slv_fid      qb_fid
1540 /* qb_usage is the current qunit (in kbytes/inodes) when quota_body is used in
1541  * quota reply */
1542 #define qb_qunit        qb_usage
1543
1544 #define QUOTA_DQACQ_FL_ACQ      0x1  /* acquire quota */
1545 #define QUOTA_DQACQ_FL_PREACQ   0x2  /* pre-acquire */
1546 #define QUOTA_DQACQ_FL_REL      0x4  /* release quota */
1547 #define QUOTA_DQACQ_FL_REPORT   0x8  /* report usage */
1548
1549 /* Quota types currently supported */
1550 enum {
1551         LQUOTA_TYPE_USR = 0x00, /* maps to USRQUOTA */
1552         LQUOTA_TYPE_GRP = 0x01, /* maps to GRPQUOTA */
1553         LQUOTA_TYPE_PRJ = 0x02, /* maps to PRJQUOTA */
1554         LQUOTA_TYPE_MAX
1555 };
1556
1557 /* There are 2 different resource types on which a quota limit can be enforced:
1558  * - inodes on the MDTs
1559  * - blocks on the OSTs */
1560 enum {
1561         LQUOTA_RES_MD           = 0x01, /* skip 0 to avoid null oid in FID */
1562         LQUOTA_RES_DT           = 0x02,
1563         LQUOTA_LAST_RES,
1564         LQUOTA_FIRST_RES        = LQUOTA_RES_MD
1565 };
1566 #define LQUOTA_NR_RES (LQUOTA_LAST_RES - LQUOTA_FIRST_RES + 1)
1567
1568 /*
1569  * Space accounting support
1570  * Format of an accounting record, providing disk usage information for a given
1571  * user or group
1572  */
1573 struct lquota_acct_rec { /* 16 bytes */
1574         __u64 bspace;  /* current space in use */
1575         __u64 ispace;  /* current # inodes in use */
1576 };
1577
1578 /*
1579  * Global quota index support
1580  * Format of a global record, providing global quota settings for a given quota
1581  * identifier
1582  */
1583 struct lquota_glb_rec { /* 32 bytes */
1584         __u64 qbr_hardlimit; /* quota hard limit, in #inodes or kbytes */
1585         __u64 qbr_softlimit; /* quota soft limit, in #inodes or kbytes */
1586         __u64 qbr_time;      /* grace time, in seconds */
1587         __u64 qbr_granted;   /* how much is granted to slaves, in #inodes or
1588                               * kbytes */
1589 };
1590
1591 /*
1592  * Slave index support
1593  * Format of a slave record, recording how much space is granted to a given
1594  * slave
1595  */
1596 struct lquota_slv_rec { /* 8 bytes */
1597         __u64 qsr_granted; /* space granted to the slave for the key=ID,
1598                             * in #inodes or kbytes */
1599 };
1600
1601 /* Data structures associated with the quota locks */
1602
1603 /* Glimpse descriptor used for the index & per-ID quota locks */
1604 struct ldlm_gl_lquota_desc {
1605         union lquota_id gl_id;    /* quota ID subject to the glimpse */
1606         __u64           gl_flags; /* see LQUOTA_FL* below */
1607         __u64           gl_ver;   /* new index version */
1608         __u64           gl_hardlimit; /* new hardlimit or qunit value */
1609         __u64           gl_softlimit; /* new softlimit */
1610         __u64           gl_time;
1611         __u64           gl_pad2;
1612 };
1613 #define gl_qunit        gl_hardlimit /* current qunit value used when
1614                                       * glimpsing per-ID quota locks */
1615
1616 /* quota glimpse flags */
1617 #define LQUOTA_FL_EDQUOT 0x1 /* user/group out of quota space on QMT */
1618
1619 /* LVB used with quota (global and per-ID) locks */
1620 struct lquota_lvb {
1621         __u64   lvb_flags;      /* see LQUOTA_FL* above */
1622         __u64   lvb_id_may_rel; /* space that might be released later */
1623         __u64   lvb_id_rel;     /* space released by the slave for this ID */
1624         __u64   lvb_id_qunit;   /* current qunit value */
1625         __u64   lvb_pad1;
1626 };
1627
1628 /* LVB used with global quota lock */
1629 #define lvb_glb_ver  lvb_id_may_rel /* current version of the global index */
1630
1631 /* op codes */
1632 enum quota_cmd {
1633         QUOTA_DQACQ     = 601,
1634         QUOTA_DQREL     = 602,
1635         QUOTA_LAST_OPC
1636 };
1637 #define QUOTA_FIRST_OPC QUOTA_DQACQ
1638
1639 /*
1640  *   MDS REQ RECORDS
1641  */
1642
1643 /* opcodes */
1644 enum mds_cmd {
1645         MDS_GETATTR             = 33,
1646         MDS_GETATTR_NAME        = 34,
1647         MDS_CLOSE               = 35,
1648         MDS_REINT               = 36,
1649         MDS_READPAGE            = 37,
1650         MDS_CONNECT             = 38,
1651         MDS_DISCONNECT          = 39,
1652         MDS_GET_ROOT            = 40,
1653         MDS_STATFS              = 41,
1654         MDS_PIN                 = 42, /* obsolete, never used in a release */
1655         MDS_UNPIN               = 43, /* obsolete, never used in a release */
1656         MDS_SYNC                = 44,
1657         MDS_DONE_WRITING        = 45, /* obsolete since 2.8.0 */
1658         MDS_SET_INFO            = 46,
1659         MDS_QUOTACHECK          = 47, /* not used since 2.4 */
1660         MDS_QUOTACTL            = 48,
1661         MDS_GETXATTR            = 49,
1662         MDS_SETXATTR            = 50, /* obsolete, now it's MDS_REINT op */
1663         MDS_WRITEPAGE           = 51,
1664         MDS_IS_SUBDIR           = 52, /* obsolete, never used in a release */
1665         MDS_GET_INFO            = 53,
1666         MDS_HSM_STATE_GET       = 54,
1667         MDS_HSM_STATE_SET       = 55,
1668         MDS_HSM_ACTION          = 56,
1669         MDS_HSM_PROGRESS        = 57,
1670         MDS_HSM_REQUEST         = 58,
1671         MDS_HSM_CT_REGISTER     = 59,
1672         MDS_HSM_CT_UNREGISTER   = 60,
1673         MDS_SWAP_LAYOUTS        = 61,
1674         MDS_RMFID               = 62,
1675         MDS_LAST_OPC
1676 };
1677
1678 #define MDS_FIRST_OPC    MDS_GETATTR
1679
1680
1681 /* opcodes for object update */
1682 enum update_cmd {
1683         OUT_UPDATE      = 1000,
1684         OUT_UPDATE_LAST_OPC
1685 };
1686
1687 #define OUT_UPDATE_FIRST_OPC    OUT_UPDATE
1688
1689 /*
1690  * Do not exceed 63
1691  */
1692
1693 enum mds_reint_op {
1694         REINT_SETATTR  = 1,
1695         REINT_CREATE   = 2,
1696         REINT_LINK     = 3,
1697         REINT_UNLINK   = 4,
1698         REINT_RENAME   = 5,
1699         REINT_OPEN     = 6,
1700         REINT_SETXATTR = 7,
1701         REINT_RMENTRY  = 8,
1702         REINT_MIGRATE  = 9,
1703         REINT_RESYNC   = 10,
1704         REINT_MAX
1705 };
1706
1707 /* the disposition of the intent outlines what was executed */
1708 #define DISP_IT_EXECD        0x00000001
1709 #define DISP_LOOKUP_EXECD    0x00000002
1710 #define DISP_LOOKUP_NEG      0x00000004
1711 #define DISP_LOOKUP_POS      0x00000008
1712 #define DISP_OPEN_CREATE     0x00000010
1713 #define DISP_OPEN_OPEN       0x00000020
1714 #define DISP_ENQ_COMPLETE    0x00400000         /* obsolete and unused */
1715 #define DISP_ENQ_OPEN_REF    0x00800000
1716 #define DISP_ENQ_CREATE_REF  0x01000000
1717 #define DISP_OPEN_LOCK       0x02000000
1718 #define DISP_OPEN_LEASE      0x04000000
1719 #define DISP_OPEN_STRIPE     0x08000000
1720 #define DISP_OPEN_DENY       0x10000000
1721
1722 /* INODE LOCK PARTS */
1723 enum mds_ibits_locks {
1724         MDS_INODELOCK_LOOKUP    = 0x000001, /* For namespace, dentry etc.  Was
1725                                              * used to protect permission (mode,
1726                                              * owner, group, etc) before 2.4. */
1727         MDS_INODELOCK_UPDATE    = 0x000002, /* size, links, timestamps */
1728         MDS_INODELOCK_OPEN      = 0x000004, /* For opened files */
1729         MDS_INODELOCK_LAYOUT    = 0x000008, /* for layout */
1730
1731         /* The PERM bit is added in 2.4, and is used to protect permission
1732          * (mode, owner, group, ACL, etc.) separate from LOOKUP lock.
1733          * For remote directories (in DNE) these locks will be granted by
1734          * different MDTs (different LDLM namespace).
1735          *
1736          * For local directory, the MDT always grants UPDATE|PERM together.
1737          * For remote directory, master MDT (where remote directory is) grants
1738          * UPDATE|PERM, and remote MDT (where name entry is) grants LOOKUP_LOCK.
1739          */
1740         MDS_INODELOCK_PERM      = 0x000010,
1741         MDS_INODELOCK_XATTR     = 0x000020, /* non-permission extended attrs */
1742         MDS_INODELOCK_DOM       = 0x000040, /* Data for Data-on-MDT files */
1743         /* Do not forget to increase MDS_INODELOCK_NUMBITS when adding bits */
1744 };
1745 #define MDS_INODELOCK_NUMBITS 7
1746 /* This FULL lock is useful to take on unlink sort of operations */
1747 #define MDS_INODELOCK_FULL ((1 << MDS_INODELOCK_NUMBITS) - 1)
1748 /* DOM lock shouldn't be canceled early, use this macro for ELC */
1749 #define MDS_INODELOCK_ELC (MDS_INODELOCK_FULL & ~MDS_INODELOCK_DOM)
1750
1751 /* NOTE: until Lustre 1.8.7/2.1.1 the fid_ver() was packed into name[2],
1752  * but was moved into name[1] along with the OID to avoid consuming the
1753  * name[2,3] fields that need to be used for the quota id (also a FID). */
1754 enum {
1755         LUSTRE_RES_ID_SEQ_OFF = 0,
1756         LUSTRE_RES_ID_VER_OID_OFF = 1,
1757         LUSTRE_RES_ID_WAS_VER_OFF = 2, /* see note above */
1758         LUSTRE_RES_ID_QUOTA_SEQ_OFF = 2,
1759         LUSTRE_RES_ID_QUOTA_VER_OID_OFF = 3,
1760         LUSTRE_RES_ID_HSH_OFF = 3
1761 };
1762
1763 #define MDS_STATUS_CONN 1
1764 #define MDS_STATUS_LOV 2
1765
1766 enum {
1767         /* these should be identical to their EXT4_*_FL counterparts, they are
1768          * redefined here only to avoid dragging in fs/ext4/ext4.h */
1769         LUSTRE_SYNC_FL          = 0x00000008, /* Synchronous updates */
1770         LUSTRE_IMMUTABLE_FL     = 0x00000010, /* Immutable file */
1771         LUSTRE_APPEND_FL        = 0x00000020, /* file writes may only append */
1772         LUSTRE_NODUMP_FL        = 0x00000040, /* do not dump file */
1773         LUSTRE_NOATIME_FL       = 0x00000080, /* do not update atime */
1774         LUSTRE_INDEX_FL         = 0x00001000, /* hash-indexed directory */
1775         LUSTRE_DIRSYNC_FL       = 0x00010000, /* dirsync behaviour (dir only) */
1776         LUSTRE_TOPDIR_FL        = 0x00020000, /* Top of directory hierarchies*/
1777         LUSTRE_INLINE_DATA_FL   = 0x10000000, /* Inode has inline data. */
1778         LUSTRE_PROJINHERIT_FL   = 0x20000000, /* Create with parents projid */
1779
1780         /* These flags will not be identical to any EXT4_*_FL counterparts,
1781          * and only reserved for lustre purpose. Note: these flags might
1782          * be conflict with some of EXT4 flags, so
1783          * 1. these conflict flags needs to be removed when the flag is
1784          * wired by la_flags see osd_attr_get().
1785          * 2. If these flags needs to be stored into inode, they will be
1786          * stored in LMA. see LMAI_XXXX */
1787         LUSTRE_ORPHAN_FL        = 0x00002000,
1788         LUSTRE_SET_SYNC_FL      = 0x00040000, /* Synchronous setattr on OSTs */
1789         LUSTRE_ENCRYPT_FL       = 0x00800000, /* encrypted file */
1790
1791         LUSTRE_LMA_FL_MASKS     = LUSTRE_ENCRYPT_FL | LUSTRE_ORPHAN_FL,
1792 };
1793
1794 #ifndef FS_XFLAG_SYNC
1795 #define FS_XFLAG_SYNC           0x00000020      /* all writes synchronous */
1796 #endif
1797 #ifndef FS_XFLAG_NOATIME
1798 #define FS_XFLAG_NOATIME        0x00000040      /* do not update access time */
1799 #endif
1800 #ifndef FS_XFLAG_IMMUTABLE
1801 #define FS_XFLAG_IMMUTABLE      0x00000008      /* file cannot be modified */
1802 #endif
1803 #ifndef FS_XFLAG_APPEND
1804 #define FS_XFLAG_APPEND         0x00000010      /* all writes append */
1805 #endif
1806 #ifndef FS_XFLAG_PROJINHERIT
1807 #define FS_XFLAG_PROJINHERIT    0x00000200      /* create with parents projid */
1808 #endif
1809
1810 /* 64 possible states */
1811 enum md_transient_state {
1812         MS_RESTORE      = (1 << 0),     /* restore is running */
1813 };
1814
1815 struct mdt_body {
1816         struct lu_fid mbo_fid1;
1817         struct lu_fid mbo_fid2;
1818         struct lustre_handle mbo_open_handle;
1819         __u64   mbo_valid;
1820         __u64   mbo_size; /* Offset, in the case of MDS_READPAGE */
1821         __s64   mbo_mtime;
1822         __s64   mbo_atime;
1823         __s64   mbo_ctime;
1824         __u64   mbo_blocks; /* XID, in the case of MDS_READPAGE */
1825         __u64   mbo_version; /* was mbo_ioepoch before 2.11 */
1826         __u64   mbo_t_state; /* transient file state defined in
1827                               * enum md_transient_state
1828                               * was "ino" until 2.4.0 */
1829         __u32   mbo_fsuid;
1830         __u32   mbo_fsgid;
1831         __u32   mbo_capability;
1832         __u32   mbo_mode;
1833         __u32   mbo_uid;
1834         __u32   mbo_gid;
1835         __u32   mbo_flags; /* most replies: LUSTRE_*_FL file attributes,
1836                             * data_version: OBD_FL_* flags
1837                             */
1838         __u32   mbo_rdev;
1839         __u32   mbo_nlink; /* #bytes to read in the case of MDS_READPAGE */
1840         __u32   mbo_layout_gen; /* was "generation" until 2.4.0 */
1841         __u32   mbo_suppgid;
1842         __u32   mbo_eadatasize;
1843         __u32   mbo_aclsize;
1844         __u32   mbo_max_mdsize;
1845         __u32   mbo_unused3; /* was max_cookiesize until 2.8 */
1846         __u32   mbo_uid_h; /* high 32-bits of uid, for FUID */
1847         __u32   mbo_gid_h; /* high 32-bits of gid, for FUID */
1848         __u32   mbo_projid;
1849         __u64   mbo_dom_size; /* size of DOM component */
1850         __u64   mbo_dom_blocks; /* blocks consumed by DOM component */
1851         __u64   mbo_btime;
1852         __u64   mbo_padding_9; /* also fix lustre_swab_mdt_body */
1853         __u64   mbo_padding_10;
1854 }; /* 216 */
1855
1856 struct mdt_ioepoch {
1857         struct lustre_handle mio_open_handle;
1858         __u64 mio_unused1; /* was ioepoch */
1859         __u32 mio_unused2; /* was flags */
1860         __u32 mio_padding;
1861 };
1862
1863 /* permissions for md_perm.mp_perm */
1864 enum {
1865         CFS_SETUID_PERM = 0x01,
1866         CFS_SETGID_PERM = 0x02,
1867         CFS_SETGRP_PERM = 0x04,
1868 };
1869
1870 struct mdt_rec_setattr {
1871         __u32           sa_opcode;
1872         __u32           sa_cap;
1873         __u32           sa_fsuid;
1874         __u32           sa_fsuid_h;
1875         __u32           sa_fsgid;
1876         __u32           sa_fsgid_h;
1877         __u32           sa_suppgid;
1878         __u32           sa_suppgid_h;
1879         __u32           sa_padding_1;
1880         __u32           sa_padding_1_h;
1881         struct lu_fid   sa_fid;
1882         __u64           sa_valid;
1883         __u32           sa_uid;
1884         __u32           sa_gid;
1885         __u64           sa_size;
1886         __u64           sa_blocks;
1887         __s64           sa_mtime;
1888         __s64           sa_atime;
1889         __s64           sa_ctime;
1890         __u32           sa_attr_flags;
1891         __u32           sa_mode;
1892         __u32           sa_bias;      /* some operation flags */
1893         __u32           sa_projid;
1894         __u32           sa_padding_4;
1895         __u32           sa_padding_5;
1896 };
1897
1898 /*
1899  * Attribute flags used in mdt_rec_setattr::sa_valid.
1900  * The kernel's #defines for ATTR_* should not be used over the network
1901  * since the client and MDS may run different kernels (see bug 13828)
1902  * Therefore, we should only use MDS_ATTR_* attributes for sa_valid.
1903  */
1904 enum mds_attr_flags {
1905         MDS_ATTR_MODE =               0x1ULL, /* = 1 */
1906         MDS_ATTR_UID =                0x2ULL, /* = 2 */
1907         MDS_ATTR_GID =                0x4ULL, /* = 4 */
1908         MDS_ATTR_SIZE =               0x8ULL, /* = 8 */
1909         MDS_ATTR_ATIME =             0x10ULL, /* = 16 */
1910         MDS_ATTR_MTIME =             0x20ULL, /* = 32 */
1911         MDS_ATTR_CTIME =             0x40ULL, /* = 64 */
1912         MDS_ATTR_ATIME_SET =         0x80ULL, /* = 128 */
1913         MDS_ATTR_MTIME_SET =        0x100ULL, /* = 256 */
1914         MDS_ATTR_FORCE =            0x200ULL, /* = 512, change it */
1915         MDS_ATTR_ATTR_FLAG =        0x400ULL, /* = 1024 */
1916         MDS_ATTR_KILL_SUID =        0x800ULL, /* = 2048 */
1917         MDS_ATTR_KILL_SGID =       0x1000ULL, /* = 4096 */
1918         MDS_ATTR_CTIME_SET =       0x2000ULL, /* = 8192 */
1919         MDS_ATTR_FROM_OPEN =       0x4000ULL, /* = 16384, from open O_TRUNC */
1920         MDS_ATTR_BLOCKS =          0x8000ULL, /* = 32768 */
1921         MDS_ATTR_PROJID =         0x10000ULL, /* = 65536 */
1922         MDS_ATTR_LSIZE =          0x20000ULL, /* = 131072 */
1923         MDS_ATTR_LBLOCKS =        0x40000ULL, /* = 262144 */
1924         MDS_ATTR_OVERRIDE =     0x2000000ULL, /* = 33554432 */
1925 };
1926
1927 enum mds_op_bias {
1928 /*      MDS_CHECK_SPLIT         = 1 << 0, obsolete before 2.3.58 */
1929         /* used for remote object getattr/open by name: in the original
1930          * getattr/open request, MDT found the object against name is on another
1931          * MDT, then packed FID and LOOKUP lock in reply and returned -EREMOTE,
1932          * and client knew it's a remote object, then set this flag in
1933          * getattr/open request and sent to the corresponding MDT to finish
1934          * getattr/open, which fetched attributes and UPDATE lock/opened file.
1935          */
1936         MDS_CROSS_REF           = 1 << 1,
1937 /*      MDS_VTX_BYPASS          = 1 << 2, obsolete since 2.3.54 */
1938         MDS_PERM_BYPASS         = 1 << 3,
1939 /*      MDS_SOM                 = 1 << 4, obsolete since 2.8.0 */
1940         MDS_QUOTA_IGNORE        = 1 << 5,
1941 /*      MDS_CLOSE_CLEANUP       = 1 << 6, obsolete since 2.3.51 */
1942         MDS_KEEP_ORPHAN         = 1 << 7,
1943         MDS_RECOV_OPEN          = 1 << 8,
1944         MDS_DATA_MODIFIED       = 1 << 9,
1945         MDS_CREATE_VOLATILE     = 1 << 10,
1946         MDS_OWNEROVERRIDE       = 1 << 11,
1947         MDS_HSM_RELEASE         = 1 << 12,
1948         MDS_CLOSE_MIGRATE       = 1 << 13,
1949         MDS_CLOSE_LAYOUT_SWAP   = 1 << 14,
1950         MDS_CLOSE_LAYOUT_MERGE  = 1 << 15,
1951         MDS_CLOSE_RESYNC_DONE   = 1 << 16,
1952         MDS_CLOSE_LAYOUT_SPLIT  = 1 << 17,
1953         MDS_TRUNC_KEEP_LEASE    = 1 << 18,
1954         MDS_PCC_ATTACH          = 1 << 19,
1955         MDS_CLOSE_UPDATE_TIMES  = 1 << 20,
1956         /* setstripe create only, don't restripe if target exists */
1957         MDS_SETSTRIPE_CREATE    = 1 << 21,
1958         MDS_FID_OP              = 1 << 22,
1959         /* migrate dirent only */
1960         MDS_MIGRATE_NSONLY      = 1 << 23,
1961 };
1962
1963 #define MDS_CLOSE_INTENT (MDS_HSM_RELEASE | MDS_CLOSE_LAYOUT_SWAP |         \
1964                           MDS_CLOSE_LAYOUT_MERGE | MDS_CLOSE_LAYOUT_SPLIT | \
1965                           MDS_CLOSE_RESYNC_DONE)
1966
1967 /* instance of mdt_reint_rec */
1968 struct mdt_rec_create {
1969         __u32           cr_opcode;
1970         __u32           cr_cap;
1971         __u32           cr_fsuid;
1972         __u32           cr_fsuid_h;
1973         __u32           cr_fsgid;
1974         __u32           cr_fsgid_h;
1975         __u32           cr_suppgid1;
1976         __u32           cr_suppgid1_h;
1977         __u32           cr_suppgid2;
1978         __u32           cr_suppgid2_h;
1979         struct lu_fid   cr_fid1;
1980         struct lu_fid   cr_fid2;
1981         struct lustre_handle cr_open_handle_old; /* in case of open replay */
1982         __s64           cr_time;
1983         union {
1984                 __u64           cr_rdev;
1985                 __u32           cr_archive_id;
1986         };
1987         __u64           cr_ioepoch;
1988         __u64           cr_padding_1;   /* rr_blocks */
1989         __u32           cr_mode;
1990         __u32           cr_bias;
1991         /* use of helpers set/get_mrc_cr_flags() is needed to access
1992          * 64 bits cr_flags [cr_flags_l, cr_flags_h], this is done to
1993          * extend cr_flags size without breaking 1.8 compat */
1994         __u32           cr_flags_l;     /* for use with open, low  32 bits  */
1995         __u32           cr_flags_h;     /* for use with open, high 32 bits */
1996         __u32           cr_umask;       /* umask for create */
1997         __u32           cr_padding_4;   /* rr_padding_4 */
1998 };
1999
2000 /* instance of mdt_reint_rec */
2001 struct mdt_rec_link {
2002         __u32           lk_opcode;
2003         __u32           lk_cap;
2004         __u32           lk_fsuid;
2005         __u32           lk_fsuid_h;
2006         __u32           lk_fsgid;
2007         __u32           lk_fsgid_h;
2008         __u32           lk_suppgid1;
2009         __u32           lk_suppgid1_h;
2010         __u32           lk_suppgid2;
2011         __u32           lk_suppgid2_h;
2012         struct lu_fid   lk_fid1;
2013         struct lu_fid   lk_fid2;
2014         __s64           lk_time;
2015         __u64           lk_padding_1;   /* rr_atime */
2016         __u64           lk_padding_2;   /* rr_ctime */
2017         __u64           lk_padding_3;   /* rr_size */
2018         __u64           lk_padding_4;   /* rr_blocks */
2019         __u32           lk_bias;
2020         __u32           lk_padding_5;   /* rr_mode */
2021         __u32           lk_padding_6;   /* rr_flags */
2022         __u32           lk_padding_7;   /* rr_padding_2 */
2023         __u32           lk_padding_8;   /* rr_padding_3 */
2024         __u32           lk_padding_9;   /* rr_padding_4 */
2025 };
2026
2027 /* instance of mdt_reint_rec */
2028 struct mdt_rec_unlink {
2029         __u32           ul_opcode;
2030         __u32           ul_cap;
2031         __u32           ul_fsuid;
2032         __u32           ul_fsuid_h;
2033         __u32           ul_fsgid;
2034         __u32           ul_fsgid_h;
2035         __u32           ul_suppgid1;
2036         __u32           ul_suppgid1_h;
2037         __u32           ul_suppgid2;
2038         __u32           ul_suppgid2_h;
2039         struct lu_fid   ul_fid1;
2040         struct lu_fid   ul_fid2;
2041         __s64           ul_time;
2042         __u64           ul_padding_2;   /* rr_atime */
2043         __u64           ul_padding_3;   /* rr_ctime */
2044         __u64           ul_padding_4;   /* rr_size */
2045         __u64           ul_padding_5;   /* rr_blocks */
2046         __u32           ul_bias;
2047         __u32           ul_mode;
2048         __u32           ul_padding_6;   /* rr_flags */
2049         __u32           ul_padding_7;   /* rr_padding_2 */
2050         __u32           ul_padding_8;   /* rr_padding_3 */
2051         __u32           ul_padding_9;   /* rr_padding_4 */
2052 };
2053
2054 /* instance of mdt_reint_rec */
2055 struct mdt_rec_rename {
2056         __u32           rn_opcode;
2057         __u32           rn_cap;
2058         __u32           rn_fsuid;
2059         __u32           rn_fsuid_h;
2060         __u32           rn_fsgid;
2061         __u32           rn_fsgid_h;
2062         __u32           rn_suppgid1;
2063         __u32           rn_suppgid1_h;
2064         __u32           rn_suppgid2;
2065         __u32           rn_suppgid2_h;
2066         struct lu_fid   rn_fid1;
2067         struct lu_fid   rn_fid2;
2068         __s64           rn_time;
2069         __u64           rn_padding_1;   /* rr_atime */
2070         __u64           rn_padding_2;   /* rr_ctime */
2071         __u64           rn_padding_3;   /* rr_size */
2072         __u64           rn_padding_4;   /* rr_blocks */
2073         __u32           rn_bias;        /* some operation flags */
2074         __u32           rn_mode;        /* cross-ref rename has mode */
2075         __u32           rn_padding_5;   /* rr_flags */
2076         __u32           rn_padding_6;   /* rr_padding_2 */
2077         __u32           rn_padding_7;   /* rr_padding_3 */
2078         __u32           rn_padding_8;   /* rr_padding_4 */
2079 };
2080
2081 /* instance of mdt_reint_rec */
2082 struct mdt_rec_setxattr {
2083         __u32           sx_opcode;
2084         __u32           sx_cap;
2085         __u32           sx_fsuid;
2086         __u32           sx_fsuid_h;
2087         __u32           sx_fsgid;
2088         __u32           sx_fsgid_h;
2089         __u32           sx_suppgid1;
2090         __u32           sx_suppgid1_h;
2091         __u32           sx_suppgid2;
2092         __u32           sx_suppgid2_h;
2093         struct lu_fid   sx_fid;
2094         __u64           sx_padding_1;   /* These three are rr_fid2 */
2095         __u32           sx_padding_2;
2096         __u32           sx_padding_3;
2097         __u64           sx_valid;
2098         __s64           sx_time;
2099         __u64           sx_padding_5;   /* rr_ctime */
2100         __u64           sx_padding_6;   /* rr_size */
2101         __u64           sx_padding_7;   /* rr_blocks */
2102         __u32           sx_size;
2103         __u32           sx_flags;
2104         __u32           sx_padding_8;   /* rr_flags */
2105         __u32           sx_padding_9;   /* rr_padding_2 */
2106         __u32           sx_padding_10;  /* rr_padding_3 */
2107         __u32           sx_padding_11;  /* rr_padding_4 */
2108 };
2109
2110 /* instance of mdt_reint_rec
2111  * FLR: for file resync MDS_REINT_RESYNC RPC. */
2112 struct mdt_rec_resync {
2113         __u32           rs_opcode;
2114         __u32           rs_cap;
2115         __u32           rs_fsuid;
2116         __u32           rs_fsuid_h;
2117         __u32           rs_fsgid;
2118         __u32           rs_fsgid_h;
2119         __u32           rs_suppgid1;
2120         __u32           rs_suppgid1_h;
2121         __u32           rs_suppgid2;
2122         __u32           rs_suppgid2_h;
2123         struct lu_fid   rs_fid;
2124         __u8            rs_padding0[sizeof(struct lu_fid)];
2125         struct lustre_handle rs_lease_handle;   /* rr_mtime */
2126         __s64           rs_padding1;    /* rr_atime */
2127         __s64           rs_padding2;    /* rr_ctime */
2128         __u64           rs_padding3;    /* rr_size */
2129         __u64           rs_padding4;    /* rr_blocks */
2130         __u32           rs_bias;
2131         __u32           rs_padding5;    /* rr_mode */
2132         __u32           rs_padding6;    /* rr_flags */
2133         __u32           rs_padding7;    /* rr_flags_h */
2134         __u32           rs_padding8;    /* rr_umask */
2135         __u16           rs_mirror_id;
2136         __u16           rs_padding9;    /* rr_padding_4 */
2137 };
2138
2139 /*
2140  * mdt_rec_reint is the template for all mdt_reint_xxx structures.
2141  * Do NOT change the size of various members, otherwise the value
2142  * will be broken in lustre_swab_mdt_rec_reint().
2143  *
2144  * If you add new members in other mdt_reint_xxx structres and need to use the
2145  * rr_padding_x fields, then update lustre_swab_mdt_rec_reint() also.
2146  */
2147 struct mdt_rec_reint {
2148         __u32           rr_opcode;
2149         __u32           rr_cap;
2150         __u32           rr_fsuid;
2151         __u32           rr_fsuid_h;
2152         __u32           rr_fsgid;
2153         __u32           rr_fsgid_h;
2154         __u32           rr_suppgid1;
2155         __u32           rr_suppgid1_h;
2156         __u32           rr_suppgid2;
2157         __u32           rr_suppgid2_h;
2158         struct lu_fid   rr_fid1;
2159         struct lu_fid   rr_fid2;
2160         __s64           rr_mtime;
2161         __s64           rr_atime;
2162         __s64           rr_ctime;
2163         __u64           rr_size;
2164         __u64           rr_blocks;
2165         __u32           rr_bias;
2166         __u32           rr_mode;
2167         __u32           rr_flags;
2168         __u32           rr_flags_h;
2169         __u32           rr_umask;
2170         __u16           rr_mirror_id;
2171         __u16           rr_padding_4; /* also fix lustre_swab_mdt_rec_reint */
2172 };
2173
2174 #define LMV_DESC_QOS_MAXAGE_DEFAULT 60  /* Seconds */
2175
2176 /* lmv structures */
2177 struct lmv_desc {
2178         __u32 ld_tgt_count;             /* how many MDS's */
2179         __u32 ld_active_tgt_count;      /* how many active */
2180         __u32 ld_default_stripe_count;  /* how many objects are used */
2181         __u32 ld_pattern;               /* default hash pattern */
2182         __u64 ld_default_hash_size;
2183         __u64 ld_padding_1;             /* also fix lustre_swab_lmv_desc */
2184         __u32 ld_padding_2;             /* also fix lustre_swab_lmv_desc */
2185         __u32 ld_qos_maxage;            /* in second */
2186         __u32 ld_padding_3;             /* also fix lustre_swab_lmv_desc */
2187         __u32 ld_padding_4;             /* also fix lustre_swab_lmv_desc */
2188         struct obd_uuid ld_uuid;
2189 };
2190
2191 /* LMV layout EA, and it will be stored both in master and slave object */
2192 struct lmv_mds_md_v1 {
2193         __u32 lmv_magic;
2194         __u32 lmv_stripe_count;
2195         __u32 lmv_master_mdt_index;     /* On master object, it is master
2196                                          * MDT index, on slave object, it
2197                                          * is stripe index of the slave obj */
2198         __u32 lmv_hash_type;            /* dir stripe policy, i.e. indicate
2199                                          * which hash function to be used,
2200                                          * Note: only lower 16 bits is being
2201                                          * used for now. Higher 16 bits will
2202                                          * be used to mark the object status,
2203                                          * for example migrating or dead. */
2204         __u32 lmv_layout_version;       /* increased each time layout changed,
2205                                          * by directory migration, restripe
2206                                          * and LFSCK. */
2207         __u32 lmv_migrate_offset;       /* once this is set, it means this
2208                                          * directory is been migrated, stripes
2209                                          * before this offset belong to target,
2210                                          * from this to source. */
2211         __u32 lmv_migrate_hash;         /* hash type of source stripes of
2212                                          * migrating directory */
2213         __u32 lmv_padding2;
2214         __u64 lmv_padding3;
2215         char lmv_pool_name[LOV_MAXPOOLNAME + 1];        /* pool name */
2216         struct lu_fid lmv_stripe_fids[0];       /* FIDs for each stripe */
2217 };
2218
2219 /* stripe count before directory split */
2220 #define lmv_split_offset        lmv_migrate_offset
2221 /* stripe count after directory merge */
2222 #define lmv_merge_offset        lmv_migrate_offset
2223 /* directory hash type after merge */
2224 #define lmv_merge_hash          lmv_migrate_hash
2225
2226 /* foreign LMV EA */
2227 struct lmv_foreign_md {
2228         __u32 lfm_magic;        /* magic number = LMV_MAGIC_FOREIGN */
2229         __u32 lfm_length;       /* length of lfm_value */
2230         __u32 lfm_type;         /* type, see LU_FOREIGN_TYPE_ */
2231         __u32 lfm_flags;        /* flags, type specific */
2232         char lfm_value[];       /* free format value */
2233 };
2234
2235 #define LMV_MAGIC_V1    0x0CD20CD0    /* normal stripe lmv magic */
2236 #define LMV_MAGIC       LMV_MAGIC_V1
2237
2238 /* #define LMV_USER_MAGIC 0x0CD30CD0 */
2239 #define LMV_MAGIC_STRIPE 0x0CD40CD0 /* magic for dir sub_stripe */
2240 #define LMV_MAGIC_FOREIGN 0x0CD50CD0 /* magic for lmv foreign */
2241
2242 /**
2243  * The FNV-1a hash algorithm is as follows:
2244  *      hash = FNV_offset_basis
2245  *      for each octet_of_data to be hashed
2246  *              hash = hash XOR octet_of_data
2247  *              hash = hash Ã— FNV_prime
2248  *      return hash
2249  * http://en.wikipedia.org/wiki/Fowler–Noll–Vo_hash_function#FNV-1a_hash
2250  *
2251  * http://www.isthe.com/chongo/tech/comp/fnv/index.html#FNV-reference-source
2252  * FNV_prime is 2^40 + 2^8 + 0xb3 = 0x100000001b3ULL
2253  **/
2254 #define LUSTRE_FNV_1A_64_PRIME  0x100000001b3ULL
2255 #define LUSTRE_FNV_1A_64_OFFSET_BIAS 0xcbf29ce484222325ULL
2256 static inline __u64 lustre_hash_fnv_1a_64(const void *buf, __kernel_size_t size)
2257 {
2258         __u64 hash = LUSTRE_FNV_1A_64_OFFSET_BIAS;
2259         const unsigned char *p = buf;
2260         __kernel_size_t i;
2261
2262         for (i = 0; i < size; i++) {
2263                 hash ^= p[i];
2264                 hash *= LUSTRE_FNV_1A_64_PRIME;
2265         }
2266
2267         return hash;
2268 }
2269
2270 /* CRUSH placement group count */
2271 #define LMV_CRUSH_PG_COUNT      4096
2272
2273 union lmv_mds_md {
2274         __u32                    lmv_magic;
2275         struct lmv_mds_md_v1     lmv_md_v1;
2276         struct lmv_user_md       lmv_user_md;
2277         struct lmv_foreign_md    lmv_foreign_md;
2278 };
2279
2280 static inline __kernel_ssize_t lmv_mds_md_size(int stripe_count,
2281                                                unsigned int lmm_magic)
2282 {
2283         __kernel_ssize_t len = -EINVAL;
2284
2285         switch (lmm_magic) {
2286         case LMV_MAGIC_V1: {
2287                 struct lmv_mds_md_v1 *lmm1;
2288
2289                 len = sizeof(*lmm1);
2290                 len += stripe_count * sizeof(lmm1->lmv_stripe_fids[0]);
2291                 break; }
2292         default:
2293                 break;
2294         }
2295         return len;
2296 }
2297
2298 static inline int lmv_mds_md_stripe_count_get(const union lmv_mds_md *lmm)
2299 {
2300         switch (__le32_to_cpu(lmm->lmv_magic)) {
2301         case LMV_MAGIC_V1:
2302                 return __le32_to_cpu(lmm->lmv_md_v1.lmv_stripe_count);
2303         case LMV_USER_MAGIC:
2304                 return __le32_to_cpu(lmm->lmv_user_md.lum_stripe_count);
2305         default:
2306                 return -EINVAL;
2307         }
2308 }
2309
2310 static inline int lmv_mds_md_hash_type_get(const union lmv_mds_md *lmm)
2311 {
2312         switch (__le32_to_cpu(lmm->lmv_magic)) {
2313         case LMV_MAGIC_V1:
2314                 return __le32_to_cpu(lmm->lmv_md_v1.lmv_hash_type);
2315         case LMV_USER_MAGIC:
2316                 return __le32_to_cpu(lmm->lmv_user_md.lum_hash_type);
2317         default:
2318                 return -EINVAL;
2319         }
2320 }
2321
2322 enum fld_rpc_opc {
2323         FLD_QUERY       = 900,
2324         FLD_READ        = 901,
2325         FLD_LAST_OPC,
2326         FLD_FIRST_OPC   = FLD_QUERY
2327 };
2328
2329 enum seq_rpc_opc {
2330         SEQ_QUERY                       = 700,
2331         SEQ_LAST_OPC,
2332         SEQ_FIRST_OPC                   = SEQ_QUERY
2333 };
2334
2335 enum seq_op {
2336         SEQ_ALLOC_SUPER = 0,
2337         SEQ_ALLOC_META = 1
2338 };
2339
2340 enum fld_op {
2341         FLD_CREATE = 0,
2342         FLD_DELETE = 1,
2343         FLD_LOOKUP = 2,
2344 };
2345
2346 /* LFSCK opcodes */
2347 enum lfsck_cmd {
2348         LFSCK_NOTIFY            = 1101,
2349         LFSCK_QUERY             = 1102,
2350         LFSCK_LAST_OPC,
2351         LFSCK_FIRST_OPC         = LFSCK_NOTIFY
2352 };
2353
2354 /*
2355  *  LOV data structures
2356  */
2357
2358 #define LOV_MAX_UUID_BUFFER_SIZE  8192
2359 /* The size of the buffer the lov/mdc reserves for the
2360  * array of UUIDs returned by the MDS.  With the current
2361  * protocol, this will limit the max number of OSTs per LOV */
2362
2363 #define LOV_DESC_MAGIC 0xB0CCDE5C
2364 #define LOV_DESC_QOS_MAXAGE_DEFAULT 5  /* Seconds */
2365 #define LOV_DESC_STRIPE_SIZE_DEFAULT (1 << LNET_MTU_BITS)
2366
2367 /* LOV settings descriptor (should only contain static info) */
2368 struct lov_desc {
2369         __u32 ld_tgt_count;             /* how many OBD's */
2370         __u32 ld_active_tgt_count;      /* how many active */
2371         __s32 ld_default_stripe_count;  /* how many objects are used */
2372         __u32 ld_pattern;               /* default PATTERN_RAID0 */
2373         __u64 ld_default_stripe_size;   /* in bytes */
2374         __s64 ld_default_stripe_offset; /* starting OST index */
2375         __u32 ld_padding_0;             /* unused */
2376         __u32 ld_qos_maxage;            /* in second */
2377         __u32 ld_padding_1;             /* also fix lustre_swab_lov_desc */
2378         __u32 ld_padding_2;             /* also fix lustre_swab_lov_desc */
2379         struct obd_uuid ld_uuid;
2380 };
2381
2382 #define ld_magic ld_active_tgt_count       /* for swabbing from llogs */
2383
2384 /*
2385  *   LDLM requests:
2386  */
2387 /* opcodes -- MUST be distinct from OST/MDS opcodes */
2388 enum ldlm_cmd {
2389         LDLM_ENQUEUE     = 101,
2390         LDLM_CONVERT     = 102,
2391         LDLM_CANCEL      = 103,
2392         LDLM_BL_CALLBACK = 104,
2393         LDLM_CP_CALLBACK = 105,
2394         LDLM_GL_CALLBACK = 106,
2395         LDLM_SET_INFO    = 107,
2396         LDLM_LAST_OPC
2397 };
2398 #define LDLM_FIRST_OPC LDLM_ENQUEUE
2399
2400 #define RES_NAME_SIZE 4
2401 struct ldlm_res_id {
2402         __u64 name[RES_NAME_SIZE];
2403 };
2404
2405 #define DLDLMRES        "[%#llx:%#llx:%#llx].%#llx"
2406 #define PLDLMRES(res)   (unsigned long long)(res)->lr_name.name[0],     \
2407                         (unsigned long long)(res)->lr_name.name[1],     \
2408                         (unsigned long long)(res)->lr_name.name[2],     \
2409                         (unsigned long long)(res)->lr_name.name[3]
2410
2411 /* lock types */
2412 enum ldlm_mode {
2413         LCK_MINMODE     = 0,
2414         LCK_EX          = 1,
2415         LCK_PW          = 2,
2416         LCK_PR          = 4,
2417         LCK_CW          = 8,
2418         LCK_CR          = 16,
2419         LCK_NL          = 32,
2420         LCK_GROUP       = 64,
2421         LCK_COS         = 128,
2422         LCK_MAXMODE
2423 };
2424
2425 #define LCK_MODE_NUM    8
2426
2427 enum ldlm_type {
2428         LDLM_PLAIN      = 10,
2429         LDLM_EXTENT     = 11,
2430         LDLM_FLOCK      = 12,
2431         LDLM_IBITS      = 13,
2432         LDLM_MAX_TYPE
2433 };
2434
2435 #define LDLM_MIN_TYPE LDLM_PLAIN
2436
2437 struct ldlm_extent {
2438         __u64 start;
2439         __u64 end;
2440         __u64 gid;
2441 };
2442
2443 static inline bool ldlm_extent_equal(const struct ldlm_extent *ex1,
2444                                     const struct ldlm_extent *ex2)
2445 {
2446         return ex1->start == ex2->start && ex1->end == ex2->end;
2447 }
2448
2449 struct ldlm_inodebits {
2450         __u64 bits;
2451         union {
2452                 __u64 try_bits; /* optional bits to try */
2453                 __u64 cancel_bits; /* for lock convert */
2454         };
2455         __u64 li_gid;
2456 };
2457
2458 struct ldlm_flock_wire {
2459         __u64 lfw_start;
2460         __u64 lfw_end;
2461         __u64 lfw_owner;
2462         __u32 lfw_padding;
2463         __u32 lfw_pid;
2464 };
2465
2466 /* it's important that the fields of the ldlm_extent structure match
2467  * the first fields of the ldlm_flock structure because there is only
2468  * one ldlm_swab routine to process the ldlm_policy_data_t union. if
2469  * this ever changes we will need to swab the union differently based
2470  * on the resource type. */
2471
2472 union ldlm_wire_policy_data {
2473         struct ldlm_extent      l_extent;
2474         struct ldlm_flock_wire  l_flock;
2475         struct ldlm_inodebits   l_inodebits;
2476 };
2477
2478 struct barrier_lvb {
2479         __u32   lvb_status;
2480         __u32   lvb_index;
2481         __u64   lvb_padding;
2482 };
2483
2484 struct ldlm_gl_barrier_desc {
2485         __u32   lgbd_status;
2486         __u32   lgbd_timeout;
2487         __u64   lgbd_padding;
2488 };
2489
2490 union ldlm_gl_desc {
2491         struct ldlm_gl_lquota_desc      lquota_desc;
2492         struct ldlm_gl_barrier_desc     barrier_desc;
2493 };
2494
2495 enum ldlm_intent_flags {
2496         IT_OPEN        = 0x00000001,
2497         IT_CREAT       = 0x00000002,
2498         IT_OPEN_CREAT  = IT_OPEN | IT_CREAT, /* To allow case label. */
2499         IT_READDIR     = 0x00000004, /* Used by mdc, not put on the wire. */
2500         IT_GETATTR     = 0x00000008,
2501         IT_LOOKUP      = 0x00000010,
2502 /*      IT_UNLINK      = 0x00000020, Obsolete. */
2503 /*      IT_TRUNC       = 0x00000040, Obsolete. */
2504         IT_GETXATTR    = 0x00000080,
2505 /*      IT_EXEC        = 0x00000100, Obsolete. */
2506 /*      IT_PIN         = 0x00000200, Obsolete. */
2507         IT_LAYOUT      = 0x00000400,
2508         IT_QUOTA_DQACQ = 0x00000800,
2509         IT_QUOTA_CONN  = 0x00001000,
2510 /*      IT_SETXATTR    = 0x00002000, Obsolete. */
2511         IT_GLIMPSE     = 0x00004000,
2512         IT_BRW         = 0x00008000,
2513 };
2514
2515 struct ldlm_intent {
2516         __u64 opc;
2517 };
2518
2519 struct ldlm_resource_desc {
2520         enum ldlm_type     lr_type;
2521         __u32              lr_pad; /* also fix lustre_swab_ldlm_resource_desc */
2522         struct ldlm_res_id lr_name;
2523 };
2524
2525 struct ldlm_lock_desc {
2526         struct ldlm_resource_desc l_resource;
2527         enum ldlm_mode l_req_mode;
2528         enum ldlm_mode l_granted_mode;
2529         union ldlm_wire_policy_data l_policy_data;
2530 };
2531
2532 #define LDLM_LOCKREQ_HANDLES 2
2533 #define LDLM_ENQUEUE_CANCEL_OFF 1
2534
2535 struct ldlm_request {
2536         __u32 lock_flags;               /* LDLM_FL_*, see lustre_dlm_flags.h */
2537         __u32 lock_count;               /* number of locks in lock_handle[] */
2538         struct ldlm_lock_desc lock_desc;/* lock descriptor */
2539         struct lustre_handle lock_handle[LDLM_LOCKREQ_HANDLES];
2540 };
2541
2542 struct ldlm_reply {
2543         __u32 lock_flags;
2544         __u32 lock_padding;     /* also fix lustre_swab_ldlm_reply */
2545         struct ldlm_lock_desc lock_desc;
2546         struct lustre_handle lock_handle;
2547         __u64  lock_policy_res1;
2548         __u64  lock_policy_res2;
2549 };
2550
2551 #define ldlm_flags_to_wire(flags)    ((__u32)(flags))
2552 #define ldlm_flags_from_wire(flags)  ((__u64)(flags))
2553
2554 /*
2555  * Opcodes for mountconf (mgs and mgc)
2556  */
2557 enum mgs_cmd {
2558         MGS_CONNECT     = 250,
2559         MGS_DISCONNECT  = 251,
2560         MGS_EXCEPTION   = 252,  /* node died, etc. */
2561         MGS_TARGET_REG  = 253,  /* whenever target starts up */
2562         MGS_TARGET_DEL  = 254,
2563         MGS_SET_INFO    = 255,
2564         MGS_CONFIG_READ = 256,
2565         MGS_LAST_OPC,
2566         MGS_FIRST_OPC   = MGS_CONNECT
2567 };
2568
2569 #if LUSTRE_VERSION_CODE < OBD_OCD_VERSION(2, 18, 53, 0)
2570 #define MGS_PARAM_MAXLEN 1024
2571 #define KEY_SET_INFO "set_info"
2572
2573 struct mgs_send_param {
2574         char            mgs_param[MGS_PARAM_MAXLEN];
2575 };
2576 #endif
2577
2578 /* We pass this info to the MGS so it can write config logs */
2579 #define MTI_NAME_MAXLEN  64
2580 #define MTI_PARAM_MAXLEN 4096
2581 #define MTI_NIDS_MAX     32
2582 struct mgs_target_info {
2583         __u32           mti_lustre_ver;
2584         __u32           mti_stripe_index;
2585         __u32           mti_config_ver;
2586         __u32           mti_flags;    /* LDD_F_* */
2587         __u32           mti_nid_count;
2588         __u32           mti_instance; /* Running instance of target */
2589         char            mti_fsname[MTI_NAME_MAXLEN];
2590         char            mti_svname[MTI_NAME_MAXLEN];
2591         char            mti_uuid[sizeof(struct obd_uuid)];
2592         __u64           mti_nids[MTI_NIDS_MAX]; /* host nids (lnet_nid_t) */
2593         char            mti_params[MTI_PARAM_MAXLEN];
2594 };
2595
2596 struct mgs_nidtbl_entry {
2597         __u64           mne_version;    /* table version of this entry */
2598         __u32           mne_instance;   /* target instance # */
2599         __u32           mne_index;      /* target index */
2600         __u32           mne_length;     /* length of this entry - by bytes */
2601         __u8            mne_type;       /* target type LDD_F_SV_TYPE_OST/MDT */
2602         __u8            mne_nid_type;   /* type of nid(mbz). for ipv6. */
2603         __u8            mne_nid_size;   /* size of each NID, by bytes */
2604         __u8            mne_nid_count;  /* # of NIDs in buffer */
2605         union {
2606                 lnet_nid_t nids[0];     /* variable size buffer for NIDs. */
2607         } u;
2608 };
2609
2610 enum mgs_cfg_type {
2611         MGS_CFG_T_CONFIG        = 0,
2612         MGS_CFG_T_SPTLRPC       = 1,
2613         MGS_CFG_T_RECOVER       = 2,
2614         MGS_CFG_T_PARAMS        = 3,
2615         MGS_CFG_T_NODEMAP       = 4,
2616         MGS_CFG_T_BARRIER       = 5,
2617         MGS_CFG_T_MAX
2618 };
2619
2620 struct mgs_config_body {
2621         char     mcb_name[MTI_NAME_MAXLEN]; /* logname */
2622         __u64    mcb_offset;    /* next index of config log to request */
2623         __u16    mcb_type;      /* type of log: MGS_CFG_T_[CONFIG|RECOVER] */
2624         __u8     mcb_nm_cur_pass;
2625         __u8     mcb_bits;      /* bits unit size of config log */
2626         __u32    mcb_units;     /* # of units for bulk transfer */
2627 };
2628
2629 struct mgs_config_res {
2630         __u64    mcr_offset;    /* index of last config log */
2631         union {
2632                 __u64    mcr_size;              /* size of the log */
2633                 __u64    mcr_nm_cur_pass;       /* current nodemap config pass */
2634         };
2635 };
2636
2637 /* Config marker flags (in config log) */
2638 #define CM_START       0x01
2639 #define CM_END         0x02
2640 #define CM_SKIP        0x04
2641 #define CM_UPGRADE146  0x08
2642 #define CM_EXCLUDE     0x10
2643 #define CM_START_SKIP (CM_START | CM_SKIP)
2644
2645 struct cfg_marker {
2646         __u32   cm_step;       /* aka config version */
2647         __u32   cm_flags;
2648         __u32   cm_vers;       /* lustre release version number */
2649         __u32   cm_padding;    /* 64 bit align */
2650         __s64   cm_createtime; /*when this record was first created */
2651         __s64   cm_canceltime; /*when this record is no longer valid*/
2652         char    cm_tgtname[MTI_NAME_MAXLEN];
2653         char    cm_comment[MTI_NAME_MAXLEN];
2654 };
2655
2656 /*
2657  * Opcodes for multiple servers.
2658  */
2659 enum obd_cmd {
2660         OBD_PING        = 400,
2661 /*      OBD_LOG_CANCEL  = 401, obsolete since 1.5 */
2662 /*      OBD_QC_CALLBACK = 402, obsolete since 2.4 */
2663         OBD_IDX_READ    = 403,
2664         OBD_LAST_OPC,
2665         OBD_FIRST_OPC = OBD_PING
2666 };
2667
2668 /**
2669  * llog contexts indices.
2670  *
2671  * There is compatibility problem with indexes below, they are not
2672  * continuous and must keep their numbers for compatibility needs.
2673  * See LU-5218 for details.
2674  */
2675 enum llog_ctxt_id {
2676         LLOG_CONFIG_ORIG_CTXT  =  0,
2677         LLOG_CONFIG_REPL_CTXT = 1,
2678         LLOG_MDS_OST_ORIG_CTXT = 2,
2679         LLOG_MDS_OST_REPL_CTXT = 3, /* kept just to avoid re-assignment */
2680         LLOG_SIZE_ORIG_CTXT = 4,
2681         LLOG_SIZE_REPL_CTXT = 5,
2682         LLOG_TEST_ORIG_CTXT = 8,
2683         LLOG_TEST_REPL_CTXT = 9, /* kept just to avoid re-assignment */
2684         LLOG_CHANGELOG_ORIG_CTXT = 12, /**< changelog generation on mdd */
2685         LLOG_CHANGELOG_REPL_CTXT = 13, /**< changelog access on clients */
2686         /* for multiple changelog consumers */
2687         LLOG_CHANGELOG_USER_ORIG_CTXT = 14,
2688         LLOG_AGENT_ORIG_CTXT = 15, /**< agent requests generation on cdt */
2689         LLOG_UPDATELOG_ORIG_CTXT = 16, /* update log. reserve for the client */
2690         LLOG_UPDATELOG_REPL_CTXT = 17, /* update log. reserve for the client */
2691         LLOG_MAX_CTXTS
2692 };
2693
2694 /** Identifier for a single log object */
2695 struct llog_logid {
2696         struct ost_id           lgl_oi;
2697         __u32                   lgl_ogen;
2698 } __attribute__((packed));
2699
2700 /** Records written to the CATALOGS list */
2701 #define CATLIST "CATALOGS"
2702 struct llog_catid {
2703         struct llog_logid       lci_logid;
2704         __u32                   lci_padding1;
2705         __u32                   lci_padding2;
2706         __u32                   lci_padding3;
2707 } __attribute__((packed));
2708
2709 /* Log data record types - there is no specific reason that these need to
2710  * be related to the RPC opcodes, but no reason not to (may be handy later?)
2711  */
2712 #define LLOG_OP_MAGIC 0x10600000
2713 #define LLOG_OP_MASK  0xfff00000
2714
2715 enum llog_op_type {
2716         LLOG_PAD_MAGIC          = LLOG_OP_MAGIC | 0x00000,
2717         OST_SZ_REC              = LLOG_OP_MAGIC | 0x00f00,
2718         /* OST_RAID1_REC        = LLOG_OP_MAGIC | 0x01000, never used */
2719         MDS_UNLINK_REC          = LLOG_OP_MAGIC | 0x10000 | (MDS_REINT << 8) |
2720                                   REINT_UNLINK, /* obsolete after 2.5.0 */
2721         MDS_UNLINK64_REC        = LLOG_OP_MAGIC | 0x90000 | (MDS_REINT << 8) |
2722                                   REINT_UNLINK,
2723         /* MDS_SETATTR_REC      = LLOG_OP_MAGIC | 0x12401, obsolete 1.8.0 */
2724         MDS_SETATTR64_REC       = LLOG_OP_MAGIC | 0x90000 | (MDS_REINT << 8) |
2725                                   REINT_SETATTR,
2726         OBD_CFG_REC             = LLOG_OP_MAGIC | 0x20000,
2727         /* PTL_CFG_REC          = LLOG_OP_MAGIC | 0x30000, obsolete 1.4.0 */
2728         LLOG_GEN_REC            = LLOG_OP_MAGIC | 0x40000,
2729         /* LLOG_JOIN_REC        = LLOG_OP_MAGIC | 0x50000, obsolete  1.8.0 */
2730         CHANGELOG_REC           = LLOG_OP_MAGIC | 0x60000,
2731         CHANGELOG_USER_REC      = LLOG_OP_MAGIC | 0x70000,
2732         CHANGELOG_USER_REC2     = LLOG_OP_MAGIC | 0x70002,
2733         HSM_AGENT_REC           = LLOG_OP_MAGIC | 0x80000,
2734         UPDATE_REC              = LLOG_OP_MAGIC | 0xa0000, /* Resevered to avoid
2735                                                             * use on client.
2736                                                             */
2737         LLOG_HDR_MAGIC          = LLOG_OP_MAGIC | 0x45539,
2738         LLOG_LOGID_MAGIC        = LLOG_OP_MAGIC | 0x4553b,
2739 };
2740
2741 #define LLOG_REC_HDR_NEEDS_SWABBING(r) \
2742         (((r)->lrh_type & __swab32(LLOG_OP_MASK)) == __swab32(LLOG_OP_MAGIC))
2743
2744 /** Log record header - stored in little endian order.
2745  * Each record must start with this struct, end with a llog_rec_tail,
2746  * and be a multiple of 256 bits in size.
2747  */
2748 struct llog_rec_hdr {
2749         __u32   lrh_len;
2750         __u32   lrh_index;
2751         __u32   lrh_type;
2752         __u32   lrh_id;
2753 } __attribute__((packed));
2754
2755 struct llog_rec_tail {
2756         __u32   lrt_len;
2757         __u32   lrt_index;
2758 } __attribute__((packed));
2759
2760 /* Where data follow just after header */
2761 #define REC_DATA(ptr)                                           \
2762         ((void *)((char *)ptr + sizeof(struct llog_rec_hdr)))
2763
2764 #define REC_DATA_LEN(rec)                                       \
2765         (rec->lrh_len - sizeof(struct llog_rec_hdr) -           \
2766          sizeof(struct llog_rec_tail))
2767
2768 struct llog_logid_rec {
2769         struct llog_rec_hdr     lid_hdr;
2770         struct llog_logid       lid_id;
2771         __u32                   lid_padding1;
2772         __u64                   lid_padding2;
2773         __u64                   lid_padding3;
2774         struct llog_rec_tail    lid_tail;
2775 } __attribute__((packed));
2776
2777 struct llog_unlink_rec {
2778         struct llog_rec_hdr     lur_hdr;
2779         __u64                   lur_oid;
2780         __u32                   lur_oseq;
2781         __u32                   lur_count;
2782         struct llog_rec_tail    lur_tail;
2783 } __attribute__((packed));
2784
2785 struct llog_unlink64_rec {
2786         struct llog_rec_hdr     lur_hdr;
2787         struct lu_fid           lur_fid;
2788         __u32                   lur_count; /* to destroy the lost precreated */
2789         __u32                   lur_padding1;
2790         __u64                   lur_padding2;
2791         __u64                   lur_padding3;
2792         struct llog_rec_tail    lur_tail;
2793 } __attribute__((packed));
2794
2795 struct llog_setattr64_rec {
2796         struct llog_rec_hdr     lsr_hdr;
2797         struct ost_id           lsr_oi;
2798         __u32                   lsr_uid;
2799         __u32                   lsr_uid_h;
2800         __u32                   lsr_gid;
2801         __u32                   lsr_gid_h;
2802         __u64                   lsr_valid;
2803         struct llog_rec_tail    lsr_tail;
2804 } __attribute__((packed));
2805
2806 /* Extended to support project quota */
2807 struct llog_setattr64_rec_v2 {
2808         struct llog_rec_hdr     lsr_hdr;
2809         struct ost_id           lsr_oi;
2810         __u32                   lsr_uid;
2811         __u32                   lsr_uid_h;
2812         __u32                   lsr_gid;
2813         __u32                   lsr_gid_h;
2814         __u64                   lsr_valid;
2815         __u32                   lsr_projid;
2816         __u32                   lsr_layout_version;
2817         __u64                   lsr_padding2;
2818         __u64                   lsr_padding3;
2819         struct llog_rec_tail    lsr_tail;
2820 } __attribute__((packed));
2821
2822 struct llog_size_change_rec {
2823         struct llog_rec_hdr     lsc_hdr;
2824         struct ll_fid           lsc_fid;
2825         __u32                   lsc_ioepoch;
2826         __u32                   lsc_padding1;
2827         __u64                   lsc_padding2;
2828         __u64                   lsc_padding3;
2829         struct llog_rec_tail    lsc_tail;
2830 } __attribute__((packed));
2831
2832 #define CHANGELOG_MAGIC 0xca103000
2833
2834 /** \a changelog_rec_type's that can't be masked */
2835 #define CHANGELOG_MINMASK BIT(CL_MARK)
2836 /** bits covering all \a changelog_rec_type's */
2837 #define CHANGELOG_ALLMASK (BIT(CL_LAST) - 1)
2838 /** default \a changelog_rec_type mask. Allow all of them, except
2839  * CL_ATIME since it can really be time consuming, and not necessary
2840  * under normal use.
2841  * Remove also CL_OPEN, CL_GETXATTR and CL_DN_OPEN from default list as it can
2842  * be costly and only necessary for audit purpose.
2843  */
2844 #define CHANGELOG_DEFMASK (CHANGELOG_ALLMASK & \
2845         ~(BIT(CL_ATIME) | BIT(CL_OPEN) | BIT(CL_GETXATTR) | BIT(CL_DN_OPEN)))
2846
2847 /* changelog llog name, needed by client replicators */
2848 #define CHANGELOG_CATALOG "changelog_catalog"
2849
2850 struct changelog_setinfo {
2851         __u64 cs_recno;
2852         __u32 cs_id;
2853 } __attribute__((packed));
2854
2855 /** changelog record */
2856 struct llog_changelog_rec {
2857         struct llog_rec_hdr  cr_hdr;
2858         struct changelog_rec cr; /**< Variable length field */
2859         struct llog_rec_tail cr_do_not_use; /**< for_sizeof_only */
2860 } __attribute__((packed));
2861
2862 #define CHANGELOG_USER_PREFIX "cl"
2863 #define CHANGELOG_USER_NAMELEN 16 /* base name including NUL terminator */
2864 #define CHANGELOG_USER_NAMELEN_FULL 30 /* basename plus 'cl$ID-' prefix */
2865
2866 struct llog_changelog_user_rec {
2867         struct llog_rec_hdr   cur_hdr;
2868         __u32                 cur_id;
2869         /* only intended to be used in relative time comparisons to
2870          * detect idle users */
2871         __u32                 cur_time;
2872         __u64                 cur_endrec;
2873         struct llog_rec_tail  cur_tail;
2874 } __attribute__((packed));
2875
2876 /* this is twice the size of CHANGELOG_USER_REC */
2877 struct llog_changelog_user_rec2 {
2878         struct llog_rec_hdr     cur_hdr;
2879         __u32                   cur_id;
2880         /* only for use in relative time comparisons to detect idle users */
2881         __u32                   cur_time;
2882         __u64                   cur_endrec;
2883         __u32                   cur_mask;
2884         __u32                   cur_padding1;
2885         char                    cur_name[CHANGELOG_USER_NAMELEN];
2886         __u64                   cur_padding2;
2887         __u64                   cur_padding3;
2888         struct llog_rec_tail    cur_tail;
2889 } __attribute__((packed));
2890
2891 enum agent_req_status {
2892         ARS_WAITING,
2893         ARS_STARTED,
2894         ARS_FAILED,
2895         ARS_CANCELED,
2896         ARS_SUCCEED,
2897 };
2898
2899 static inline const char *agent_req_status2name(enum agent_req_status ars)
2900 {
2901         switch (ars) {
2902         case ARS_WAITING:
2903                 return "WAITING";
2904         case ARS_STARTED:
2905                 return "STARTED";
2906         case ARS_FAILED:
2907                 return "FAILED";
2908         case ARS_CANCELED:
2909                 return "CANCELED";
2910         case ARS_SUCCEED:
2911                 return "SUCCEED";
2912         default:
2913                 return "UNKNOWN";
2914         }
2915 }
2916
2917 struct llog_agent_req_rec {
2918         struct llog_rec_hdr     arr_hdr;        /**< record header */
2919         __u32                   arr_status;     /**< status of the request */
2920                                                 /* must match enum
2921                                                  * agent_req_status */
2922         __u32                   arr_archive_id; /**< backend archive number */
2923         __u64                   arr_flags;      /**< req flags */
2924         __u64                   arr_compound_id; /**< compound cookie, ignored */
2925         __u64                   arr_req_create; /**< req. creation time */
2926         __u64                   arr_req_change; /**< req. status change time */
2927         struct hsm_action_item  arr_hai;        /**< req. to the agent */
2928         struct llog_rec_tail    arr_tail; /**< record tail for_sizezof_only */
2929 } __attribute__((packed));
2930
2931 /* Old llog gen for compatibility */
2932 struct llog_gen {
2933         __u64 mnt_cnt;
2934         __u64 conn_cnt;
2935 } __attribute__((packed));
2936
2937 struct llog_gen_rec {
2938         struct llog_rec_hdr     lgr_hdr;
2939         struct llog_gen         lgr_gen;
2940         __u64                   padding1;
2941         __u64                   padding2;
2942         __u64                   padding3;
2943         struct llog_rec_tail    lgr_tail;
2944 };
2945
2946 /* flags for the logs */
2947 enum llog_flag {
2948         LLOG_F_ZAP_WHEN_EMPTY   = 0x1,
2949         LLOG_F_IS_CAT           = 0x2,
2950         LLOG_F_IS_PLAIN         = 0x4,
2951         LLOG_F_EXT_JOBID        = 0x8,
2952         LLOG_F_IS_FIXSIZE       = 0x10,
2953         LLOG_F_EXT_EXTRA_FLAGS  = 0x20,
2954         LLOG_F_EXT_X_UIDGID     = 0x40,
2955         LLOG_F_EXT_X_NID        = 0x80,
2956         LLOG_F_EXT_X_OMODE      = 0x100,
2957         LLOG_F_EXT_X_XATTR      = 0x200,
2958         LLOG_F_RM_ON_ERR        = 0x400,
2959
2960         /* Note: Flags covered by LLOG_F_EXT_MASK will be inherited from
2961          * catlog to plain log, so do not add LLOG_F_IS_FIXSIZE here,
2962          * because the catlog record is usually fixed size, but its plain
2963          * log record can be variable */
2964         LLOG_F_EXT_MASK = LLOG_F_EXT_JOBID | LLOG_F_EXT_EXTRA_FLAGS |
2965                           LLOG_F_EXT_X_UIDGID | LLOG_F_EXT_X_NID |
2966                           LLOG_F_EXT_X_OMODE | LLOG_F_EXT_X_XATTR,
2967 };
2968
2969 /* means first record of catalog */
2970 enum {
2971         LLOG_CAT_FIRST = -1,
2972 };
2973
2974 /* On-disk header structure of each log object, stored in little endian order */
2975 #define LLOG_MIN_CHUNK_SIZE     8192
2976 #define LLOG_HEADER_SIZE        (96) /* sizeof (llog_log_hdr) + sizeof(llh_tail)
2977                                       * - sizeof(llh_bitmap) */
2978 #define LLOG_BITMAP_BYTES       (LLOG_MIN_CHUNK_SIZE - LLOG_HEADER_SIZE)
2979 #define LLOG_MIN_REC_SIZE       (24) /* round(llog_rec_hdr + llog_rec_tail) */
2980
2981 struct llog_log_hdr {
2982         struct llog_rec_hdr     llh_hdr;
2983         __s64                   llh_timestamp;
2984         __u32                   llh_count;
2985         __u32                   llh_bitmap_offset;
2986         __u32                   llh_size;
2987         __u32                   llh_flags;
2988         /* for a catalog the first/oldest and still in-use plain slot is just
2989          * next to it. It will serve as the upper limit after Catalog has
2990          * wrapped around */
2991         __u32                   llh_cat_idx;
2992         struct obd_uuid         llh_tgtuuid;
2993         __u32                   llh_reserved[LLOG_HEADER_SIZE/sizeof(__u32)-23];
2994         /* These fields must always be at the end of the llog_log_hdr.
2995          * Note: llh_bitmap size is variable because llog chunk size could be
2996          * bigger than LLOG_MIN_CHUNK_SIZE, i.e. sizeof(llog_log_hdr) > 8192
2997          * bytes, and the real size is stored in llh_hdr.lrh_len, which means
2998          * llh_tail should only be refered by LLOG_HDR_TAIL().
2999          * But this structure is also used by client/server llog interface
3000          * (see llog_client.c), it will be kept in its original way to avoid
3001          * compatiblity issue. */
3002         __u32                   llh_bitmap[LLOG_BITMAP_BYTES / sizeof(__u32)];
3003         struct llog_rec_tail    llh_tail;
3004 } __attribute__((packed));
3005 #undef LLOG_HEADER_SIZE
3006 #undef LLOG_BITMAP_BYTES
3007
3008 #define LLOG_HDR_BITMAP_SIZE(llh)       (__u32)((llh->llh_hdr.lrh_len - \
3009                                          llh->llh_bitmap_offset -       \
3010                                          sizeof(llh->llh_tail)) * 8)
3011 #define LLOG_HDR_BITMAP(llh)    (__u32 *)((char *)(llh) +               \
3012                                           (llh)->llh_bitmap_offset)
3013 #define LLOG_HDR_TAIL(llh)      ((struct llog_rec_tail *)((char *)llh + \
3014                                                  llh->llh_hdr.lrh_len - \
3015                                                  sizeof(llh->llh_tail)))
3016
3017 /** log cookies are used to reference a specific log file and a record therein,
3018     and pass record offset from llog_process_thread to llog_write */
3019 struct llog_cookie {
3020         union {
3021                 struct llog_logid       lgc_lgl;
3022                 __u64                   lgc_offset;
3023         };
3024         __u32                   lgc_subsys;
3025         __u32                   lgc_index;
3026         __u32                   lgc_padding;
3027 } __attribute__((packed));
3028
3029 /** llog protocol */
3030 enum llogd_rpc_ops {
3031         LLOG_ORIGIN_HANDLE_CREATE       = 501,
3032         LLOG_ORIGIN_HANDLE_NEXT_BLOCK   = 502,
3033         LLOG_ORIGIN_HANDLE_READ_HEADER  = 503,
3034 /*      LLOG_ORIGIN_HANDLE_WRITE_REC    = 504, Obsolete by 2.1. */
3035 /*      LLOG_ORIGIN_HANDLE_CLOSE        = 505, Obsolete by 1.8. */
3036 /*      LLOG_ORIGIN_CONNECT             = 506, Obsolete by 2.4. */
3037 /*      LLOG_CATINFO                    = 507, Obsolete by 2.3. */
3038         LLOG_ORIGIN_HANDLE_PREV_BLOCK   = 508,
3039         LLOG_ORIGIN_HANDLE_DESTROY      = 509, /* Obsolete by 2.11. */
3040         LLOG_LAST_OPC,
3041         LLOG_FIRST_OPC                  = LLOG_ORIGIN_HANDLE_CREATE
3042 };
3043
3044 struct llogd_body {
3045         struct llog_logid  lgd_logid;
3046         __u32 lgd_ctxt_idx;
3047         __u32 lgd_llh_flags;
3048         __u32 lgd_index;
3049         __u32 lgd_saved_index;
3050         __u32 lgd_len;
3051         __u64 lgd_cur_offset;
3052 } __attribute__((packed));
3053
3054 struct llogd_conn_body {
3055         struct llog_gen         lgdc_gen;
3056         struct llog_logid       lgdc_logid;
3057         __u32                   lgdc_ctxt_idx;
3058 } __attribute__((packed));
3059
3060 /* Note: 64-bit types are 64-bit aligned in structure */
3061 struct obdo {
3062         __u64                   o_valid;        /* hot fields in this obdo */
3063         struct ost_id           o_oi;
3064         __u64                   o_parent_seq;
3065         __u64                   o_size;         /* o_size-o_blocks == ost_lvb */
3066         __s64                   o_mtime;
3067         __s64                   o_atime;
3068         __s64                   o_ctime;
3069         __u64                   o_blocks;       /* brw: cli sent cached bytes */
3070         __u64                   o_grant;
3071
3072         /* 32-bit fields start here: keep an even number of them via padding */
3073         __u32                   o_blksize;      /* optimal IO blocksize */
3074         __u32                   o_mode;         /* brw: cli sent cache remain */
3075         __u32                   o_uid;
3076         __u32                   o_gid;
3077         __u32                   o_flags;
3078         __u32                   o_nlink;        /* brw: checksum */
3079         __u32                   o_parent_oid;
3080         __u32                   o_misc;         /* brw: o_dropped */
3081
3082         __u64                   o_ioepoch;      /* epoch in ost writes */
3083         __u32                   o_stripe_idx;   /* holds stripe idx */
3084         __u32                   o_parent_ver;
3085         struct lustre_handle    o_handle;       /* brw: lock handle to prolong
3086                                                  * locks */
3087         /* Originally, the field is llog_cookie for destroy with unlink cookie
3088          * from MDS, it is obsolete in 2.8. Then reuse it by client to transfer
3089          * layout and PFL information in IO, setattr RPCs. Since llog_cookie is
3090          * not used on wire any longer, remove it from the obdo, then it can be
3091          * enlarged freely in the further without affect related RPCs.
3092          *
3093          * sizeof(ost_layout) + sieof(__u32) == sizeof(llog_cookie). */
3094         struct ost_layout       o_layout;
3095         __u32                   o_layout_version;
3096         __u32                   o_uid_h;
3097         __u32                   o_gid_h;
3098
3099         __u64                   o_data_version; /* getattr: sum of iversion for
3100                                                  * each stripe.
3101                                                  * brw: grant space consumed on
3102                                                  * the client for the write */
3103         __u32                   o_projid;
3104         __u32                   o_padding_4;    /* also fix
3105                                                  * lustre_swab_obdo() */
3106         __u64                   o_padding_5;
3107         __u64                   o_padding_6;
3108 };
3109
3110 #define o_dirty   o_blocks
3111 #define o_undirty o_mode
3112 #define o_dropped o_misc
3113 #define o_cksum   o_nlink
3114 #define o_grant_used o_data_version
3115 #define o_falloc_mode o_nlink
3116
3117 struct lfsck_request {
3118         __u32           lr_event;
3119         __u32           lr_index;
3120         __u32           lr_flags;
3121         __u32           lr_valid;
3122         union {
3123                 __u32   lr_speed;
3124                 __u32   lr_status;
3125         };
3126         __u16           lr_version;
3127         __u16           lr_active;
3128         __u16           lr_param;
3129         __u16           lr_async_windows;
3130         __u32           lr_flags2;
3131         struct lu_fid   lr_fid;
3132         struct lu_fid   lr_fid2;
3133         __u32           lr_comp_id;
3134         __u32           lr_padding_0;
3135         __u64           lr_padding_1;
3136         __u64           lr_padding_2;
3137         __u64           lr_padding_3;
3138 };
3139
3140 struct lfsck_reply {
3141         __u32           lr_status;
3142         __u32           lr_padding_1;
3143         __u64           lr_repaired;
3144 };
3145
3146 enum lfsck_events {
3147         LE_LASTID_REBUILDING    = 1,
3148         LE_LASTID_REBUILT       = 2,
3149         LE_PHASE1_DONE          = 3,
3150         LE_PHASE2_DONE          = 4,
3151         LE_START                = 5,
3152         LE_STOP                 = 6,
3153         LE_QUERY                = 7,
3154         /* LE_FID_ACCESSED      = 8, moved to lfsck_events_local */
3155         LE_PEER_EXIT            = 9,
3156         LE_CONDITIONAL_DESTROY  = 10,
3157         LE_PAIRS_VERIFY         = 11,
3158         LE_SET_LMV_MASTER       = 15,
3159         LE_SET_LMV_SLAVE        = 16,
3160 };
3161
3162 enum lfsck_event_flags {
3163         LEF_TO_OST              = 0x00000001,
3164         LEF_FROM_OST            = 0x00000002,
3165         LEF_SET_LMV_HASH        = 0x00000004,
3166         LEF_SET_LMV_ALL         = 0x00000008,
3167         LEF_RECHECK_NAME_HASH   = 0x00000010,
3168         LEF_QUERY_ALL           = 0x00000020,
3169 };
3170
3171 /* request structure for OST's */
3172 struct ost_body {
3173         struct obdo oa;
3174 };
3175
3176 /* Key for FIEMAP to be used in get_info calls */
3177 struct ll_fiemap_info_key {
3178         char            lfik_name[8];
3179         struct obdo     lfik_oa;
3180         struct fiemap   lfik_fiemap;
3181 };
3182
3183 #define IDX_INFO_MAGIC 0x3D37CC37
3184
3185 /* Index file transfer through the network. The server serializes the index into
3186  * a byte stream which is sent to the client via a bulk transfer */
3187 struct idx_info {
3188         __u32           ii_magic;
3189
3190         /* reply: see idx_info_flags below */
3191         __u32           ii_flags;
3192
3193         /* request & reply: number of lu_idxpage (to be) transferred */
3194         __u16           ii_count;
3195         __u16           ii_pad0;
3196
3197         /* request: requested attributes passed down to the iterator API */
3198         __u32           ii_attrs;
3199
3200         /* request & reply: index file identifier (FID) */
3201         struct lu_fid   ii_fid;
3202
3203         /* reply: version of the index file before starting to walk the index.
3204          * Please note that the version can be modified at any time during the
3205          * transfer */
3206         __u64           ii_version;
3207
3208         /* request: hash to start with:
3209          * reply: hash of the first entry of the first lu_idxpage and hash
3210          *        of the entry to read next if any */
3211         __u64           ii_hash_start;
3212         __u64           ii_hash_end;
3213
3214         /* reply: size of keys in lu_idxpages, minimal one if II_FL_VARKEY is
3215          * set */
3216         __u16           ii_keysize;
3217
3218         /* reply: size of records in lu_idxpages, minimal one if II_FL_VARREC
3219          * is set */
3220         __u16           ii_recsize;
3221
3222         __u32           ii_pad1;
3223         __u64           ii_pad2;
3224         __u64           ii_pad3;
3225 };
3226
3227 #define II_END_OFF      MDS_DIR_END_OFF /* all entries have been read */
3228
3229 /* List of flags used in idx_info::ii_flags */
3230 enum idx_info_flags {
3231         II_FL_NOHASH    = 1 << 0, /* client doesn't care about hash value */
3232         II_FL_VARKEY    = 1 << 1, /* keys can be of variable size */
3233         II_FL_VARREC    = 1 << 2, /* records can be of variable size */
3234         II_FL_NONUNQ    = 1 << 3, /* index supports non-unique keys */
3235         II_FL_NOKEY     = 1 << 4, /* client doesn't care about key */
3236 };
3237
3238 #define LIP_MAGIC 0x8A6D6B6C
3239
3240 /* 4KB (= LU_PAGE_SIZE) container gathering key/record pairs */
3241 struct lu_idxpage {
3242         /* 16-byte header */
3243         __u32   lip_magic;
3244         __u16   lip_flags;
3245         __u16   lip_nr;   /* number of entries in the container */
3246         __u64   lip_pad0; /* additional padding for future use */
3247
3248         /* key/record pairs are stored in the remaining 4080 bytes.
3249          * depending upon the flags in idx_info::ii_flags, each key/record
3250          * pair might be preceded by:
3251          * - a hash value
3252          * - the key size (II_FL_VARKEY is set)
3253          * - the record size (II_FL_VARREC is set)
3254          *
3255          * For the time being, we only support fixed-size key & record. */
3256         char    lip_entries[0];
3257 };
3258
3259 #define LIP_HDR_SIZE (offsetof(struct lu_idxpage, lip_entries))
3260
3261 /* Gather all possible type associated with a 4KB container */
3262 union lu_page {
3263         struct lu_dirpage       lp_dir; /* for MDS_READPAGE */
3264         struct lu_idxpage       lp_idx; /* for OBD_IDX_READ */
3265         char                    lp_array[LU_PAGE_SIZE];
3266 };
3267
3268 /* security opcodes */
3269 enum sec_cmd {
3270         SEC_CTX_INIT            = 801,
3271         SEC_CTX_INIT_CONT       = 802,
3272         SEC_CTX_FINI            = 803,
3273         SEC_LAST_OPC,
3274         SEC_FIRST_OPC           = SEC_CTX_INIT
3275 };
3276
3277 /** The link ea holds 1 \a link_ea_entry for each hardlink */
3278 #define LINK_EA_MAGIC 0x11EAF1DFUL
3279 struct link_ea_header {
3280         __u32 leh_magic;
3281         __u32 leh_reccount;
3282         __u64 leh_len;  /* total size */
3283         __u32 leh_overflow_time;
3284         __u32 leh_padding;
3285 };
3286
3287 /** Hardlink data is name and parent fid.
3288  * Stored in this crazy struct for maximum packing and endian-neutrality
3289  */
3290 struct link_ea_entry {
3291         /** __u16 stored big-endian, unaligned */
3292         unsigned char      lee_reclen[2];
3293         unsigned char      lee_parent_fid[sizeof(struct lu_fid)];
3294         char               lee_name[0];
3295 } __attribute__((packed));
3296
3297 /** fid2path request/reply structure */
3298 struct getinfo_fid2path {
3299         struct lu_fid   gf_fid;
3300         __u64           gf_recno;
3301         __u32           gf_linkno;
3302         __u32           gf_pathlen;
3303         union {
3304                 char            gf_path[0];
3305                 struct lu_fid   gf_root_fid[0];
3306         } gf_u;
3307 } __attribute__((packed));
3308
3309 /** path2parent request/reply structures */
3310 struct getparent {
3311         struct lu_fid   gp_fid;         /**< parent FID */
3312         __u32           gp_linkno;      /**< hardlink number */
3313         __u32           gp_name_size;   /**< size of the name field */
3314         char            gp_name[0];     /**< zero-terminated link name */
3315 } __attribute__((packed));
3316
3317 enum layout_intent_opc {
3318         LAYOUT_INTENT_ACCESS    = 0,    /** generic access */
3319         LAYOUT_INTENT_READ      = 1,    /** not used */
3320         LAYOUT_INTENT_WRITE     = 2,    /** write file, for comp layout */
3321         LAYOUT_INTENT_GLIMPSE   = 3,    /** not used */
3322         LAYOUT_INTENT_TRUNC     = 4,    /** truncate file, for comp layout */
3323         LAYOUT_INTENT_RELEASE   = 5,    /** reserved for HSM release */
3324         LAYOUT_INTENT_RESTORE   = 6,    /** reserved for HSM restore */
3325 };
3326
3327 /* enqueue layout lock with intent */
3328 struct layout_intent {
3329         __u32 li_opc;   /* intent operation for enqueue, read, write etc */
3330         __u32 li_flags;
3331         struct lu_extent li_extent;
3332 } __attribute__((packed));
3333
3334 /**
3335  * On the wire version of hsm_progress structure.
3336  *
3337  * Contains the userspace hsm_progress and some internal fields.
3338  */
3339 struct hsm_progress_kernel {
3340         /* Field taken from struct hsm_progress */
3341         struct lu_fid           hpk_fid;
3342         __u64                   hpk_cookie;
3343         struct hsm_extent       hpk_extent;
3344         __u16                   hpk_flags;
3345         __u16                   hpk_errval; /* positive val */
3346         __u32                   hpk_padding1;
3347         /* Additional fields */
3348         __u64                   hpk_data_version;
3349         __u64                   hpk_padding2;
3350 } __attribute__((packed));
3351
3352 /**
3353  * OUT_UPDATE RPC Format
3354  *
3355  * During the cross-ref operation, the Master MDT, which the client send the
3356  * request to, will disassembly the operation into object updates, then OSP
3357  * will send these updates to the remote MDT to be executed.
3358  *
3359  * An UPDATE_OBJ RPC does a list of updates.  Each update belongs to an
3360  * operation and does a type of modification to an object.
3361  *
3362  * Request Format
3363  *
3364  *   update_buf
3365  *   update (1st)
3366  *   update (2nd)
3367  *   ...
3368  *   update (ub_count-th)
3369  *
3370  * ub_count must be less than or equal to UPDATE_PER_RPC_MAX.
3371  *
3372  * Reply Format
3373  *
3374  *   update_reply
3375  *   rc [+ buffers] (1st)
3376  *   rc [+ buffers] (2st)
3377  *   ...
3378  *   rc [+ buffers] (nr_count-th)
3379  *
3380  * ur_count must be less than or equal to UPDATE_PER_RPC_MAX and should usually
3381  * be equal to ub_count.
3382  */
3383
3384 /**
3385  * Type of each update, if adding/deleting update, please also update
3386  * update_opcode in lustre/target/out_lib.c.
3387  */
3388 enum update_type {
3389         OUT_START               = 0,
3390         OUT_CREATE              = 1,
3391         OUT_DESTROY             = 2,
3392         OUT_REF_ADD             = 3,
3393         OUT_REF_DEL             = 4,
3394         OUT_ATTR_SET            = 5,
3395         OUT_ATTR_GET            = 6,
3396         OUT_XATTR_SET           = 7,
3397         OUT_XATTR_GET           = 8,
3398         OUT_INDEX_LOOKUP        = 9,
3399         OUT_INDEX_INSERT        = 10,
3400         OUT_INDEX_DELETE        = 11,
3401         OUT_WRITE               = 12,
3402         OUT_XATTR_DEL           = 13,
3403         OUT_PUNCH               = 14,
3404         OUT_READ                = 15,
3405         OUT_NOOP                = 16,
3406         OUT_XATTR_LIST          = 17,
3407         OUT_LAST
3408 };
3409
3410 enum update_flag {
3411         UPDATE_FL_OST           = 0x00000001,   /* op from OST (not MDT) */
3412         UPDATE_FL_SYNC          = 0x00000002,   /* commit before replying */
3413         UPDATE_FL_COMMITTED     = 0x00000004,   /* op committed globally */
3414         UPDATE_FL_NOLOG         = 0x00000008    /* for idempotent updates */
3415 };
3416
3417 struct object_update_param {
3418         __u16   oup_len;        /* length of this parameter */
3419         __u16   oup_padding;
3420         __u32   oup_padding2;
3421         char    oup_buf[0];
3422 } __attribute__((packed));
3423
3424 /* object update */
3425 struct object_update {
3426         __u16           ou_type;                /* enum update_type */
3427         __u16           ou_params_count;        /* update parameters count */
3428         __u32           ou_result_size;         /* how many bytes can return */
3429         __u32           ou_flags;               /* enum update_flag */
3430         __u32           ou_padding1;            /* padding 1 */
3431         __u64           ou_batchid;             /* op transno on master */
3432         struct lu_fid   ou_fid;                 /* object to be updated */
3433         struct object_update_param ou_params[0]; /* update params */
3434 };
3435
3436 #define UPDATE_REQUEST_MAGIC_V1 0xBDDE0001
3437 #define UPDATE_REQUEST_MAGIC_V2 0xBDDE0002
3438 #define UPDATE_REQUEST_MAGIC    UPDATE_REQUEST_MAGIC_V2
3439 /* Hold object_updates sending to the remote OUT in single RPC */
3440 struct object_update_request {
3441         __u32                   ourq_magic;
3442         __u16                   ourq_count;     /* number of ourq_updates[] */
3443         __u16                   ourq_padding;
3444         struct object_update    ourq_updates[0];
3445 };
3446
3447 #define OUT_UPDATE_HEADER_MAGIC         0xBDDF0001
3448 #define OUT_UPDATE_MAX_INLINE_SIZE      4096
3449 /* Header for updates request between MDTs */
3450 struct out_update_header {
3451         __u32           ouh_magic;
3452         __u32           ouh_count;
3453         __u32           ouh_inline_length;
3454         __u32           ouh_reply_size;
3455         __u32           ouh_inline_data[0];
3456 };
3457
3458 struct out_update_buffer {
3459         __u32   oub_size;
3460         __u32   oub_padding;
3461 };
3462
3463 /* the result of object update */
3464 struct object_update_result {
3465         __u32   our_rc;
3466         __u16   our_datalen;
3467         __u16   our_padding;
3468         __u32   our_data[0];
3469 };
3470
3471 #define UPDATE_REPLY_MAGIC_V1   0x00BD0001
3472 #define UPDATE_REPLY_MAGIC_V2   0x00BD0002
3473 #define UPDATE_REPLY_MAGIC      UPDATE_REPLY_MAGIC_V2
3474 /* Hold object_update_results being replied from the remote OUT. */
3475 struct object_update_reply {
3476         __u32   ourp_magic;
3477         __u16   ourp_count;
3478         __u16   ourp_padding;
3479         __u16   ourp_lens[0];
3480 };
3481
3482 /* read update result */
3483 struct out_read_reply {
3484         __u32   orr_size;
3485         __u32   orr_padding;
3486         __u64   orr_offset;
3487         char    orr_data[0];
3488 };
3489
3490 /** layout swap request structure
3491  * fid1 and fid2 are in mdt_body
3492  */
3493 struct mdc_swap_layouts {
3494         __u64           msl_flags;
3495 } __attribute__((packed));
3496
3497 #define INLINE_RESYNC_ARRAY_SIZE        15
3498 struct close_data_resync_done {
3499         __u32   resync_count;
3500         __u32   resync_ids_inline[INLINE_RESYNC_ARRAY_SIZE];
3501 };
3502
3503 struct close_data {
3504         struct lustre_handle    cd_handle;
3505         struct lu_fid           cd_fid;
3506         __u64                   cd_data_version;
3507         union {
3508                 __u64                           cd_reserved[8];
3509                 struct close_data_resync_done   cd_resync;
3510                 /* split close */
3511                 __u16                           cd_mirror_id;
3512                 /* PCC release */
3513                 __u32                           cd_archive_id;
3514         };
3515 };
3516
3517 /* Update llog format */
3518 struct update_op {
3519         struct lu_fid   uop_fid;
3520         __u16           uop_type;
3521         __u16           uop_param_count;
3522         __u16           uop_params_off[];
3523 } __attribute__((packed));
3524
3525 struct update_ops {
3526         struct update_op        uops_op[0];
3527 };
3528
3529 struct update_params {
3530         struct object_update_param      up_params[0];
3531 };
3532
3533 enum update_records_flag {
3534         UPDATE_RECORD_CONTINUE = 1 >> 0,
3535 };
3536 /*
3537  * This is the update record format used to store the updates in
3538  * disk. All updates of the operation will be stored in ur_ops.
3539  * All of parameters for updates of the operation will be stored
3540  * in ur_params.
3541  * To save the space of the record, parameters in ur_ops will only
3542  * remember their offset in ur_params, so to avoid storing duplicate
3543  * parameters in ur_params, which can help us save a lot space for
3544  * operation like creating striped directory.
3545  */
3546 struct update_records {
3547         __u64                   ur_master_transno;
3548         __u64                   ur_batchid;
3549         __u32                   ur_flags;
3550         /* If the operation includes multiple updates, then ur_index
3551          * means the index of the update inside the whole updates. */
3552         __u32                   ur_index;
3553         __u32                   ur_update_count;
3554         __u32                   ur_param_count;
3555         struct update_ops       ur_ops;
3556          /* Note ur_ops has a variable size, so comment out
3557           * the following ur_params, in case some use it directly
3558           * update_records->ur_params
3559           *
3560           * struct update_params        ur_params;
3561           */
3562 };
3563
3564 struct llog_update_record {
3565         struct llog_rec_hdr     lur_hdr;
3566         struct update_records   lur_update_rec;
3567         /* Note ur_update_rec has a variable size, so comment out
3568         * the following ur_tail, in case someone use it directly
3569         *
3570         * struct llog_rec_tail lur_tail;
3571         */
3572 };
3573
3574 /* sepol string format is:
3575  * <1-digit for SELinux status>:<policy name>:<policy version>:<policy hash>
3576  */
3577 /* Max length of the sepol string
3578  * Should be large enough to contain a sha512sum of the policy
3579  */
3580 #define SELINUX_MODE_LEN 1
3581 #define SELINUX_POLICY_VER_LEN 3 /* 3 chars to leave room for the future */
3582 #define SELINUX_POLICY_HASH_LEN 64
3583 #define LUSTRE_NODEMAP_SEPOL_LENGTH (SELINUX_MODE_LEN + NAME_MAX + \
3584                                      SELINUX_POLICY_VER_LEN + \
3585                                      SELINUX_POLICY_HASH_LEN + 3)
3586
3587 /* nodemap records, uses 32 byte record length */
3588 #define LUSTRE_NODEMAP_NAME_LENGTH 16
3589 struct nodemap_cluster_rec {
3590         char    ncr_name[LUSTRE_NODEMAP_NAME_LENGTH + 1];
3591         __u8    ncr_flags;
3592         __u16   ncr_padding1;
3593         __u32   ncr_squash_projid;
3594         __u32   ncr_squash_uid;
3595         __u32   ncr_squash_gid;
3596 };
3597
3598 /* lnet_nid_t is 8 bytes */
3599 struct nodemap_range_rec {
3600         lnet_nid_t      nrr_start_nid;
3601         lnet_nid_t      nrr_end_nid;
3602         __u64           nrr_padding1;
3603         __u64           nrr_padding2;
3604 };
3605
3606 struct nodemap_id_rec {
3607         __u32   nir_id_fs;
3608         __u32   nir_padding1;
3609         __u64   nir_padding2;
3610         __u64   nir_padding3;
3611         __u64   nir_padding4;
3612 };
3613
3614 struct nodemap_global_rec {
3615         __u8    ngr_is_active;
3616         __u8    ngr_padding1;
3617         __u16   ngr_padding2;
3618         __u32   ngr_padding3;
3619         __u64   ngr_padding4;
3620         __u64   ngr_padding5;
3621         __u64   ngr_padding6;
3622 };
3623
3624 union nodemap_rec {
3625         struct nodemap_cluster_rec ncr;
3626         struct nodemap_range_rec nrr;
3627         struct nodemap_id_rec nir;
3628         struct nodemap_global_rec ngr;
3629 };
3630
3631 /* This is the lu_ladvise struct which goes out on the wire.
3632  * Corresponds to the userspace arg llapi_lu_ladvise.
3633  * value[1-4] are unspecified fields, used differently by different advices */
3634 struct lu_ladvise {
3635         __u16 lla_advice;       /* advice type */
3636         __u16 lla_value1;       /* values for different advice types */
3637         __u32 lla_value2;
3638         __u64 lla_start;        /* first byte of extent for advice */
3639         __u64 lla_end;          /* last byte of extent for advice */
3640         __u32 lla_value3;
3641         __u32 lla_value4;
3642 };
3643
3644 /* This is the ladvise_hdr which goes on the wire, corresponds to the userspace
3645  * arg llapi_ladvise_hdr.
3646  * value[1-3] are unspecified fields, used differently by different advices */
3647 struct ladvise_hdr {
3648         __u32                   lah_magic;      /* LADVISE_MAGIC */
3649         __u32                   lah_count;      /* number of advices */
3650         __u64                   lah_flags;      /* from enum ladvise_flag */
3651         __u32                   lah_value1;     /* unused */
3652         __u32                   lah_value2;     /* unused */
3653         __u64                   lah_value3;     /* unused */
3654         struct lu_ladvise       lah_advise[0];  /* advices in this header */
3655 };
3656
3657 #if defined(__cplusplus)
3658 }
3659 #endif
3660
3661 #endif
3662 /** @} lustreidl */