Whamcloud - gitweb
LU-3187 ost: check pre 2.4 echo client in obdo validation
[fs/lustre-release.git] / lustre / include / lustre / lustre_idl.h
1 /*
2  * GPL HEADER START
3  *
4  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 only,
8  * as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License version 2 for more details (a copy is included
14  * in the LICENSE file that accompanied this code).
15  *
16  * You should have received a copy of the GNU General Public License
17  * version 2 along with this program; If not, see
18  * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
19  *
20  * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
21  * CA 95054 USA or visit www.sun.com if you need additional information or
22  * have any questions.
23  *
24  * GPL HEADER END
25  */
26 /*
27  * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
28  * Use is subject to license terms.
29  *
30  * Copyright (c) 2011, 2013, Intel Corporation.
31  */
32 /*
33  * This file is part of Lustre, http://www.lustre.org/
34  * Lustre is a trademark of Sun Microsystems, Inc.
35  *
36  * lustre/include/lustre/lustre_idl.h
37  *
38  * Lustre wire protocol definitions.
39  */
40
41 /** \defgroup lustreidl lustreidl
42  *
43  * Lustre wire protocol definitions.
44  *
45  * ALL structs passing over the wire should be declared here.  Structs
46  * that are used in interfaces with userspace should go in lustre_user.h.
47  *
48  * All structs being declared here should be built from simple fixed-size
49  * types (__u8, __u16, __u32, __u64) or be built from other types or
50  * structs also declared in this file.  Similarly, all flags and magic
51  * values in those structs should also be declared here.  This ensures
52  * that the Lustre wire protocol is not influenced by external dependencies.
53  *
54  * The only other acceptable items in this file are VERY SIMPLE accessor
55  * functions to avoid callers grubbing inside the structures, and the
56  * prototypes of the swabber functions for each struct.  Nothing that
57  * depends on external functions or definitions should be in here.
58  *
59  * Structs must be properly aligned to put 64-bit values on an 8-byte
60  * boundary.  Any structs being added here must also be added to
61  * utils/wirecheck.c and "make newwiretest" run to regenerate the
62  * utils/wiretest.c sources.  This allows us to verify that wire structs
63  * have the proper alignment/size on all architectures.
64  *
65  * DO NOT CHANGE any of the structs, flags, values declared here and used
66  * in released Lustre versions.  Some structs may have padding fields that
67  * can be used.  Some structs might allow addition at the end (verify this
68  * in the code to ensure that new/old clients that see this larger struct
69  * do not fail, otherwise you need to implement protocol compatibility).
70  *
71  * We assume all nodes are either little-endian or big-endian, and we
72  * always send messages in the sender's native format.  The receiver
73  * detects the message format by checking the 'magic' field of the message
74  * (see lustre_msg_swabbed() below).
75  *
76  * Each wire type has corresponding 'lustre_swab_xxxtypexxx()' routines,
77  * implemented either here, inline (trivial implementations) or in
78  * ptlrpc/pack_generic.c.  These 'swabbers' convert the type from "other"
79  * endian, in-place in the message buffer.
80  *
81  * A swabber takes a single pointer argument.  The caller must already have
82  * verified that the length of the message buffer >= sizeof (type).
83  *
84  * For variable length types, a second 'lustre_swab_v_xxxtypexxx()' routine
85  * may be defined that swabs just the variable part, after the caller has
86  * verified that the message buffer is large enough.
87  *
88  * @{
89  */
90
91 #ifndef _LUSTRE_IDL_H_
92 #define _LUSTRE_IDL_H_
93
94 #if !defined(LASSERT) && !defined(LPU64)
95 #include <libcfs/libcfs.h> /* for LASSERT, LPUX64, etc */
96 #endif
97
98 /* Defn's shared with user-space. */
99 #include <lustre/lustre_user.h>
100
101 /*
102  *  GENERAL STUFF
103  */
104 /* FOO_REQUEST_PORTAL is for incoming requests on the FOO
105  * FOO_REPLY_PORTAL   is for incoming replies on the FOO
106  * FOO_BULK_PORTAL    is for incoming bulk on the FOO
107  */
108
109 #define CONNMGR_REQUEST_PORTAL          1
110 #define CONNMGR_REPLY_PORTAL            2
111 //#define OSC_REQUEST_PORTAL            3
112 #define OSC_REPLY_PORTAL                4
113 //#define OSC_BULK_PORTAL               5
114 #define OST_IO_PORTAL                   6
115 #define OST_CREATE_PORTAL               7
116 #define OST_BULK_PORTAL                 8
117 //#define MDC_REQUEST_PORTAL            9
118 #define MDC_REPLY_PORTAL               10
119 //#define MDC_BULK_PORTAL              11
120 #define MDS_REQUEST_PORTAL             12
121 //#define MDS_REPLY_PORTAL             13
122 #define MDS_BULK_PORTAL                14
123 #define LDLM_CB_REQUEST_PORTAL         15
124 #define LDLM_CB_REPLY_PORTAL           16
125 #define LDLM_CANCEL_REQUEST_PORTAL     17
126 #define LDLM_CANCEL_REPLY_PORTAL       18
127 //#define PTLBD_REQUEST_PORTAL           19
128 //#define PTLBD_REPLY_PORTAL             20
129 //#define PTLBD_BULK_PORTAL              21
130 #define MDS_SETATTR_PORTAL             22
131 #define MDS_READPAGE_PORTAL            23
132 #define MDS_MDS_PORTAL                 24
133
134 #define MGC_REPLY_PORTAL               25
135 #define MGS_REQUEST_PORTAL             26
136 #define MGS_REPLY_PORTAL               27
137 #define OST_REQUEST_PORTAL             28
138 #define FLD_REQUEST_PORTAL             29
139 #define SEQ_METADATA_PORTAL            30
140 #define SEQ_DATA_PORTAL                31
141 #define SEQ_CONTROLLER_PORTAL          32
142 #define MGS_BULK_PORTAL                33
143
144 /* Portal 63 is reserved for the Cray Inc DVS - nic@cray.com, roe@cray.com, n8851@cray.com */
145
146 /* packet types */
147 #define PTL_RPC_MSG_REQUEST 4711
148 #define PTL_RPC_MSG_ERR     4712
149 #define PTL_RPC_MSG_REPLY   4713
150
151 /* DON'T use swabbed values of MAGIC as magic! */
152 #define LUSTRE_MSG_MAGIC_V1 0x0BD00BD0
153 #define LUSTRE_MSG_MAGIC_V2 0x0BD00BD3
154
155 #define LUSTRE_MSG_MAGIC_V1_SWABBED 0xD00BD00B
156 #define LUSTRE_MSG_MAGIC_V2_SWABBED 0xD30BD00B
157
158 #define LUSTRE_MSG_MAGIC LUSTRE_MSG_MAGIC_V2
159
160 #define PTLRPC_MSG_VERSION  0x00000003
161 #define LUSTRE_VERSION_MASK 0xffff0000
162 #define LUSTRE_OBD_VERSION  0x00010000
163 #define LUSTRE_MDS_VERSION  0x00020000
164 #define LUSTRE_OST_VERSION  0x00030000
165 #define LUSTRE_DLM_VERSION  0x00040000
166 #define LUSTRE_LOG_VERSION  0x00050000
167 #define LUSTRE_MGS_VERSION  0x00060000
168
169 typedef __u32 mdsno_t;
170 typedef __u64 seqno_t;
171 typedef __u64 obd_id;
172 typedef __u64 obd_seq;
173 typedef __s64 obd_time;
174 typedef __u64 obd_size;
175 typedef __u64 obd_off;
176 typedef __u64 obd_blocks;
177 typedef __u64 obd_valid;
178 typedef __u32 obd_blksize;
179 typedef __u32 obd_mode;
180 typedef __u32 obd_uid;
181 typedef __u32 obd_gid;
182 typedef __u32 obd_flag;
183 typedef __u32 obd_count;
184
185 /**
186  * Describes a range of sequence, lsr_start is included but lsr_end is
187  * not in the range.
188  * Same structure is used in fld module where lsr_index field holds mdt id
189  * of the home mdt.
190  */
191 struct lu_seq_range {
192         __u64 lsr_start;
193         __u64 lsr_end;
194         __u32 lsr_index;
195         __u32 lsr_flags;
196 };
197
198 #define LU_SEQ_RANGE_MDT        0x0
199 #define LU_SEQ_RANGE_OST        0x1
200 #define LU_SEQ_RANGE_ANY        0x3
201
202 #define LU_SEQ_RANGE_MASK       0x3
203
204 static inline unsigned fld_range_type(const struct lu_seq_range *range)
205 {
206         return range->lsr_flags & LU_SEQ_RANGE_MASK;
207 }
208
209 static inline int fld_range_is_ost(const struct lu_seq_range *range)
210 {
211         return fld_range_type(range) == LU_SEQ_RANGE_OST;
212 }
213
214 static inline int fld_range_is_mdt(const struct lu_seq_range *range)
215 {
216         return fld_range_type(range) == LU_SEQ_RANGE_MDT;
217 }
218
219 /**
220  * This all range is only being used when fld client sends fld query request,
221  * but it does not know whether the seq is MDT or OST, so it will send req
222  * with ALL type, which means either seq type gotten from lookup can be
223  * expected.
224  */
225 static inline unsigned fld_range_is_any(const struct lu_seq_range *range)
226 {
227         return fld_range_type(range) == LU_SEQ_RANGE_ANY;
228 }
229
230 static inline void fld_range_set_type(struct lu_seq_range *range,
231                                       unsigned flags)
232 {
233         LASSERT(!(flags & ~LU_SEQ_RANGE_MASK));
234         range->lsr_flags |= flags;
235 }
236
237 static inline void fld_range_set_mdt(struct lu_seq_range *range)
238 {
239         fld_range_set_type(range, LU_SEQ_RANGE_MDT);
240 }
241
242 static inline void fld_range_set_ost(struct lu_seq_range *range)
243 {
244         fld_range_set_type(range, LU_SEQ_RANGE_OST);
245 }
246
247 static inline void fld_range_set_any(struct lu_seq_range *range)
248 {
249         fld_range_set_type(range, LU_SEQ_RANGE_ANY);
250 }
251
252 /**
253  * returns  width of given range \a r
254  */
255
256 static inline __u64 range_space(const struct lu_seq_range *range)
257 {
258         return range->lsr_end - range->lsr_start;
259 }
260
261 /**
262  * initialize range to zero
263  */
264
265 static inline void range_init(struct lu_seq_range *range)
266 {
267         range->lsr_start = range->lsr_end = range->lsr_index = 0;
268 }
269
270 /**
271  * check if given seq id \a s is within given range \a r
272  */
273
274 static inline int range_within(const struct lu_seq_range *range,
275                                __u64 s)
276 {
277         return s >= range->lsr_start && s < range->lsr_end;
278 }
279
280 static inline int range_is_sane(const struct lu_seq_range *range)
281 {
282         return (range->lsr_end >= range->lsr_start);
283 }
284
285 static inline int range_is_zero(const struct lu_seq_range *range)
286 {
287         return (range->lsr_start == 0 && range->lsr_end == 0);
288 }
289
290 static inline int range_is_exhausted(const struct lu_seq_range *range)
291
292 {
293         return range_space(range) == 0;
294 }
295
296 /* return 0 if two range have the same location */
297 static inline int range_compare_loc(const struct lu_seq_range *r1,
298                                     const struct lu_seq_range *r2)
299 {
300         return r1->lsr_index != r2->lsr_index ||
301                r1->lsr_flags != r2->lsr_flags;
302 }
303
304 #define DRANGE "[%#16.16"LPF64"x-%#16.16"LPF64"x):%x:%s"
305
306 #define PRANGE(range)           \
307         (range)->lsr_start,     \
308         (range)->lsr_end,       \
309         (range)->lsr_index,     \
310         fld_range_is_mdt(range) ? "mdt" : "ost"
311
312
313 /** \defgroup lu_fid lu_fid
314  * @{ */
315
316 /**
317  * Flags for lustre_mdt_attrs::lma_compat and lustre_mdt_attrs::lma_incompat.
318  * Deprecated since HSM and SOM attributes are now stored in separate on-disk
319  * xattr.
320  */
321 enum lma_compat {
322         LMAC_HSM = 0x00000001,
323         LMAC_SOM = 0x00000002,
324 };
325
326 /**
327  * Masks for all features that should be supported by a Lustre version to
328  * access a specific file.
329  * This information is stored in lustre_mdt_attrs::lma_incompat.
330  */
331 enum lma_incompat {
332         LMAI_RELEASED = 0x0000001, /* file is released */
333         LMAI_AGENT = 0x00000002, /* agent inode */
334         LMAI_REMOTE_PARENT = 0x00000004, /* the parent of the object
335                                             is on the remote MDT */
336 };
337 #define LMA_INCOMPAT_SUPP       (LMAI_AGENT | LMAI_REMOTE_PARENT)
338
339 extern void lustre_lma_swab(struct lustre_mdt_attrs *lma);
340 extern void lustre_lma_init(struct lustre_mdt_attrs *lma,
341                             const struct lu_fid *fid, __u32 incompat);
342 /**
343  * SOM on-disk attributes stored in a separate xattr.
344  */
345 struct som_attrs {
346         /** Bitfield for supported data in this structure. For future use. */
347         __u32   som_compat;
348
349         /** Incompat feature list. The supported feature mask is availabe in
350          * SOM_INCOMPAT_SUPP */
351         __u32   som_incompat;
352
353         /** IO Epoch SOM attributes belongs to */
354         __u64   som_ioepoch;
355         /** total file size in objects */
356         __u64   som_size;
357         /** total fs blocks in objects */
358         __u64   som_blocks;
359         /** mds mount id the size is valid for */
360         __u64   som_mountid;
361 };
362 extern void lustre_som_swab(struct som_attrs *attrs);
363
364 #define SOM_INCOMPAT_SUPP 0x0
365
366 /**
367  * HSM on-disk attributes stored in a separate xattr.
368  */
369 struct hsm_attrs {
370         /** Bitfield for supported data in this structure. For future use. */
371         __u32   hsm_compat;
372
373         /** HSM flags, see hsm_flags enum below */
374         __u32   hsm_flags;
375         /** backend archive id associated with the file */
376         __u64   hsm_arch_id;
377         /** version associated with the last archiving, if any */
378         __u64   hsm_arch_ver;
379 };
380 extern void lustre_hsm_swab(struct hsm_attrs *attrs);
381
382 /**
383  * fid constants
384  */
385 enum {
386         /** LASTID file has zero OID */
387         LUSTRE_FID_LASTID_OID = 0UL,
388         /** initial fid id value */
389         LUSTRE_FID_INIT_OID  = 1UL
390 };
391
392 /** returns fid object sequence */
393 static inline __u64 fid_seq(const struct lu_fid *fid)
394 {
395         return fid->f_seq;
396 }
397
398 /** returns fid object id */
399 static inline __u32 fid_oid(const struct lu_fid *fid)
400 {
401         return fid->f_oid;
402 }
403
404 /** returns fid object version */
405 static inline __u32 fid_ver(const struct lu_fid *fid)
406 {
407         return fid->f_ver;
408 }
409
410 static inline void fid_zero(struct lu_fid *fid)
411 {
412         memset(fid, 0, sizeof(*fid));
413 }
414
415 static inline obd_id fid_ver_oid(const struct lu_fid *fid)
416 {
417         return ((__u64)fid_ver(fid) << 32 | fid_oid(fid));
418 }
419
420 /**
421  * Note that reserved SEQ numbers below 12 will conflict with ldiskfs
422  * inodes in the IGIF namespace, so these reserved SEQ numbers can be
423  * used for other purposes and not risk collisions with existing inodes.
424  *
425  * Different FID Format
426  * http://arch.lustre.org/index.php?title=Interoperability_fids_zfs#NEW.0
427  */
428 enum fid_seq {
429         FID_SEQ_OST_MDT0        = 0,
430         FID_SEQ_LLOG            = 1, /* unnamed llogs */
431         FID_SEQ_ECHO            = 2,
432         FID_SEQ_OST_MDT1        = 3,
433         FID_SEQ_OST_MAX         = 9, /* Max MDT count before OST_on_FID */
434         FID_SEQ_LLOG_NAME       = 10, /* named llogs */
435         FID_SEQ_RSVD            = 11,
436         FID_SEQ_IGIF            = 12,
437         FID_SEQ_IGIF_MAX        = 0x0ffffffffULL,
438         FID_SEQ_IDIF            = 0x100000000ULL,
439         FID_SEQ_IDIF_MAX        = 0x1ffffffffULL,
440         /* Normal FID sequence starts from this value, i.e. 1<<33 */
441         FID_SEQ_START           = 0x200000000ULL,
442         /* sequence for local pre-defined FIDs listed in local_oid */
443         FID_SEQ_LOCAL_FILE      = 0x200000001ULL,
444         FID_SEQ_DOT_LUSTRE      = 0x200000002ULL,
445         /* sequence is used for local named objects FIDs generated
446          * by local_object_storage library */
447         FID_SEQ_LOCAL_NAME      = 0x200000003ULL,
448         /* Because current FLD will only cache the fid sequence, instead
449          * of oid on the client side, if the FID needs to be exposed to
450          * clients sides, it needs to make sure all of fids under one
451          * sequence will be located in one MDT. */
452         FID_SEQ_SPECIAL         = 0x200000004ULL,
453         FID_SEQ_QUOTA           = 0x200000005ULL,
454         FID_SEQ_QUOTA_GLB       = 0x200000006ULL,
455         FID_SEQ_ROOT            = 0x200000007ULL,  /* Located on MDT0 */
456         FID_SEQ_NORMAL          = 0x200000400ULL,
457         FID_SEQ_LOV_DEFAULT     = 0xffffffffffffffffULL
458 };
459
460 #define OBIF_OID_MAX_BITS           32
461 #define OBIF_MAX_OID                (1ULL << OBIF_OID_MAX_BITS)
462 #define OBIF_OID_MASK               ((1ULL << OBIF_OID_MAX_BITS) - 1)
463 #define IDIF_OID_MAX_BITS           48
464 #define IDIF_MAX_OID                (1ULL << IDIF_OID_MAX_BITS)
465 #define IDIF_OID_MASK               ((1ULL << IDIF_OID_MAX_BITS) - 1)
466
467 /** OID for FID_SEQ_SPECIAL */
468 enum special_oid {
469         /* Big Filesystem Lock to serialize rename operations */
470         FID_OID_SPECIAL_BFL     = 1UL,
471 };
472
473 /** OID for FID_SEQ_DOT_LUSTRE */
474 enum dot_lustre_oid {
475         FID_OID_DOT_LUSTRE  = 1UL,
476         FID_OID_DOT_LUSTRE_OBF = 2UL,
477 };
478
479 static inline int fid_seq_is_mdt0(obd_seq seq)
480 {
481         return (seq == FID_SEQ_OST_MDT0);
482 }
483
484 static inline int fid_seq_is_mdt(const __u64 seq)
485 {
486         return seq == FID_SEQ_OST_MDT0 || seq >= FID_SEQ_NORMAL;
487 };
488
489 static inline int fid_seq_is_echo(obd_seq seq)
490 {
491         return (seq == FID_SEQ_ECHO);
492 }
493
494 static inline int fid_is_echo(const struct lu_fid *fid)
495 {
496         return fid_seq_is_echo(fid_seq(fid));
497 }
498
499 static inline int fid_seq_is_llog(obd_seq seq)
500 {
501         return (seq == FID_SEQ_LLOG);
502 }
503
504 static inline int fid_is_llog(const struct lu_fid *fid)
505 {
506         /* file with OID == 0 is not llog but contains last oid */
507         return fid_seq_is_llog(fid_seq(fid)) && fid_oid(fid) > 0;
508 }
509
510 static inline int fid_seq_is_rsvd(const __u64 seq)
511 {
512         return (seq > FID_SEQ_OST_MDT0 && seq <= FID_SEQ_RSVD);
513 };
514
515 static inline int fid_seq_is_special(const __u64 seq)
516 {
517         return seq == FID_SEQ_SPECIAL;
518 };
519
520 static inline int fid_seq_is_local_file(const __u64 seq)
521 {
522         return seq == FID_SEQ_LOCAL_FILE ||
523                seq == FID_SEQ_LOCAL_NAME;
524 };
525
526 static inline int fid_seq_is_root(const __u64 seq)
527 {
528         return seq == FID_SEQ_ROOT;
529 }
530
531 static inline int fid_seq_is_dot(const __u64 seq)
532 {
533         return seq == FID_SEQ_DOT_LUSTRE;
534 }
535
536 static inline int fid_seq_is_default(const __u64 seq)
537 {
538         return seq == FID_SEQ_LOV_DEFAULT;
539 }
540
541 static inline int fid_is_mdt0(const struct lu_fid *fid)
542 {
543         return fid_seq_is_mdt0(fid_seq(fid));
544 }
545
546 static inline void lu_root_fid(struct lu_fid *fid)
547 {
548         fid->f_seq = FID_SEQ_ROOT;
549         fid->f_oid = 1;
550         fid->f_ver = 0;
551 }
552
553 /**
554  * Check if a fid is igif or not.
555  * \param fid the fid to be tested.
556  * \return true if the fid is a igif; otherwise false.
557  */
558 static inline int fid_seq_is_igif(const __u64 seq)
559 {
560         return seq >= FID_SEQ_IGIF && seq <= FID_SEQ_IGIF_MAX;
561 }
562
563 static inline int fid_is_igif(const struct lu_fid *fid)
564 {
565         return fid_seq_is_igif(fid_seq(fid));
566 }
567
568 /**
569  * Check if a fid is idif or not.
570  * \param fid the fid to be tested.
571  * \return true if the fid is a idif; otherwise false.
572  */
573 static inline int fid_seq_is_idif(const __u64 seq)
574 {
575         return seq >= FID_SEQ_IDIF && seq <= FID_SEQ_IDIF_MAX;
576 }
577
578 static inline int fid_is_idif(const struct lu_fid *fid)
579 {
580         return fid_seq_is_idif(fid_seq(fid));
581 }
582
583 static inline int fid_is_local_file(const struct lu_fid *fid)
584 {
585         return fid_seq_is_local_file(fid_seq(fid));
586 }
587
588 static inline int fid_seq_is_norm(const __u64 seq)
589 {
590         return (seq >= FID_SEQ_NORMAL);
591 }
592
593 static inline int fid_is_norm(const struct lu_fid *fid)
594 {
595         return fid_seq_is_norm(fid_seq(fid));
596 }
597
598 /* convert an OST objid into an IDIF FID SEQ number */
599 static inline obd_seq fid_idif_seq(obd_id id, __u32 ost_idx)
600 {
601         return FID_SEQ_IDIF | (ost_idx << 16) | ((id >> 32) & 0xffff);
602 }
603
604 /* convert a packed IDIF FID into an OST objid */
605 static inline obd_id fid_idif_id(obd_seq seq, __u32 oid, __u32 ver)
606 {
607         return ((__u64)ver << 48) | ((seq & 0xffff) << 32) | oid;
608 }
609
610 /* extract ost index from IDIF FID */
611 static inline __u32 fid_idif_ost_idx(const struct lu_fid *fid)
612 {
613         LASSERT(fid_is_idif(fid));
614         return (fid_seq(fid) >> 16) & 0xffff;
615 }
616
617 /* extract OST sequence (group) from a wire ost_id (id/seq) pair */
618 static inline obd_seq ostid_seq(const struct ost_id *ostid)
619 {
620         if (fid_seq_is_mdt0(ostid->oi.oi_seq))
621                 return FID_SEQ_OST_MDT0;
622
623         if (fid_seq_is_default(ostid->oi.oi_seq))
624                 return FID_SEQ_LOV_DEFAULT;
625
626         if (fid_is_idif(&ostid->oi_fid))
627                 return FID_SEQ_OST_MDT0;
628
629         return fid_seq(&ostid->oi_fid);
630 }
631
632 /* extract OST objid from a wire ost_id (id/seq) pair */
633 static inline obd_id ostid_id(const struct ost_id *ostid)
634 {
635         if (fid_seq_is_mdt0(ostid_seq(ostid)))
636                 return ostid->oi.oi_id & IDIF_OID_MASK;
637
638         if (fid_is_idif(&ostid->oi_fid))
639                 return fid_idif_id(fid_seq(&ostid->oi_fid),
640                                    fid_oid(&ostid->oi_fid), 0);
641
642         return fid_oid(&ostid->oi_fid);
643 }
644
645 static inline void ostid_set_seq(struct ost_id *oi, __u64 seq)
646 {
647         if (fid_seq_is_mdt0(seq) || fid_seq_is_default(seq)) {
648                 oi->oi.oi_seq = seq;
649         } else {
650                 oi->oi_fid.f_seq = seq;
651                 /* Note: if f_oid + f_ver is zero, we need init it
652                  * to be 1, otherwise, ostid_seq will treat this
653                  * as old ostid (oi_seq == 0) */
654                 if (oi->oi_fid.f_oid == 0 && oi->oi_fid.f_ver == 0)
655                         oi->oi_fid.f_oid = LUSTRE_FID_INIT_OID;
656         }
657 }
658
659 static inline void ostid_set_seq_mdt0(struct ost_id *oi)
660 {
661         ostid_set_seq(oi, FID_SEQ_OST_MDT0);
662 }
663
664 static inline void ostid_set_seq_echo(struct ost_id *oi)
665 {
666         ostid_set_seq(oi, FID_SEQ_ECHO);
667 }
668
669 static inline void ostid_set_seq_llog(struct ost_id *oi)
670 {
671         ostid_set_seq(oi, FID_SEQ_LLOG);
672 }
673
674 /**
675  * Note: we need check oi_seq to decide where to set oi_id,
676  * so oi_seq should always be set ahead of oi_id.
677  */
678 static inline void ostid_set_id(struct ost_id *oi, __u64 oid)
679 {
680         if (fid_seq_is_mdt0(ostid_seq(oi))) {
681                 if (oid >= IDIF_MAX_OID) {
682                         CERROR("Bad "LPU64" to set "DOSTID"\n",
683                                 oid, POSTID(oi));
684                         return;
685                 }
686                 oi->oi.oi_id = oid;
687         } else {
688                 if (oid > OBIF_MAX_OID) {
689                         CERROR("Bad "LPU64" to set "DOSTID"\n",
690                                 oid, POSTID(oi));
691                         return;
692                 }
693                 oi->oi_fid.f_oid = oid;
694         }
695 }
696
697 static inline void ostid_inc_id(struct ost_id *oi)
698 {
699         if (fid_seq_is_mdt0(ostid_seq(oi))) {
700                 if (unlikely(ostid_id(oi) + 1 > IDIF_MAX_OID)) {
701                         CERROR("Bad inc "DOSTID"\n", POSTID(oi));
702                         return;
703                 }
704                 oi->oi.oi_id++;
705         } else {
706                 oi->oi_fid.f_oid++;
707         }
708 }
709
710 static inline void ostid_dec_id(struct ost_id *oi)
711 {
712         if (fid_seq_is_mdt0(ostid_seq(oi)))
713                 oi->oi.oi_id--;
714         else
715                 oi->oi_fid.f_oid--;
716 }
717
718 /**
719  * Unpack an OST object id/seq (group) into a FID.  This is needed for
720  * converting all obdo, lmm, lsm, etc. 64-bit id/seq pairs into proper
721  * FIDs.  Note that if an id/seq is already in FID/IDIF format it will
722  * be passed through unchanged.  Only legacy OST objects in "group 0"
723  * will be mapped into the IDIF namespace so that they can fit into the
724  * struct lu_fid fields without loss.  For reference see:
725  * http://arch.lustre.org/index.php?title=Interoperability_fids_zfs
726  */
727 static inline int ostid_to_fid(struct lu_fid *fid, struct ost_id *ostid,
728                                __u32 ost_idx)
729 {
730         if (ost_idx > 0xffff) {
731                 CERROR("bad ost_idx, "DOSTID" ost_idx:%u\n", POSTID(ostid),
732                        ost_idx);
733                 return -EBADF;
734         }
735
736         if (fid_seq_is_mdt0(ostid_seq(ostid))) {
737                 /* This is a "legacy" (old 1.x/2.early) OST object in "group 0"
738                  * that we map into the IDIF namespace.  It allows up to 2^48
739                  * objects per OST, as this is the object namespace that has
740                  * been in production for years.  This can handle create rates
741                  * of 1M objects/s/OST for 9 years, or combinations thereof. */
742                 if (ostid_id(ostid) >= IDIF_MAX_OID) {
743                          CERROR("bad MDT0 id, "DOSTID" ost_idx:%u\n",
744                                 POSTID(ostid), ost_idx);
745                          return -EBADF;
746                 }
747                 fid->f_seq = fid_idif_seq(ostid_id(ostid), ost_idx);
748                 /* truncate to 32 bits by assignment */
749                 fid->f_oid = ostid_id(ostid);
750                 /* in theory, not currently used */
751                 fid->f_ver = ostid_id(ostid) >> 48;
752         } else /* if (fid_seq_is_idif(seq) || fid_seq_is_norm(seq)) */ {
753                /* This is either an IDIF object, which identifies objects across
754                 * all OSTs, or a regular FID.  The IDIF namespace maps legacy
755                 * OST objects into the FID namespace.  In both cases, we just
756                 * pass the FID through, no conversion needed. */
757                 if (ostid->oi_fid.f_ver != 0) {
758                         CERROR("bad MDT0 id, "DOSTID" ost_idx:%u\n",
759                                 POSTID(ostid), ost_idx);
760                         return -EBADF;
761                 }
762                 *fid = ostid->oi_fid;
763         }
764
765         return 0;
766 }
767
768 /* pack any OST FID into an ostid (id/seq) for the wire/disk */
769 static inline int fid_to_ostid(const struct lu_fid *fid, struct ost_id *ostid)
770 {
771         if (unlikely(fid_seq_is_igif(fid->f_seq))) {
772                 CERROR("bad IGIF, "DFID"\n", PFID(fid));
773                 return -EBADF;
774         }
775
776         if (fid_is_idif(fid)) {
777                 ostid_set_seq_mdt0(ostid);
778                 ostid_set_id(ostid, fid_idif_id(fid_seq(fid), fid_oid(fid),
779                                                 fid_ver(fid)));
780         } else {
781                 ostid->oi_fid = *fid;
782         }
783
784         return 0;
785 }
786
787 /* Check whether the fid is for LAST_ID */
788 static inline int fid_is_last_id(const struct lu_fid *fid)
789 {
790         return (fid_oid(fid) == 0);
791 }
792
793 /**
794  * Get inode number from a igif.
795  * \param fid a igif to get inode number from.
796  * \return inode number for the igif.
797  */
798 static inline ino_t lu_igif_ino(const struct lu_fid *fid)
799 {
800         return fid_seq(fid);
801 }
802
803 extern void lustre_swab_ost_id(struct ost_id *oid);
804
805 /**
806  * Get inode generation from a igif.
807  * \param fid a igif to get inode generation from.
808  * \return inode generation for the igif.
809  */
810 static inline __u32 lu_igif_gen(const struct lu_fid *fid)
811 {
812         return fid_oid(fid);
813 }
814
815 /**
816  * Build igif from the inode number/generation.
817  */
818 static inline void lu_igif_build(struct lu_fid *fid, __u32 ino, __u32 gen)
819 {
820         fid->f_seq = ino;
821         fid->f_oid = gen;
822         fid->f_ver = 0;
823 }
824
825 /*
826  * Fids are transmitted across network (in the sender byte-ordering),
827  * and stored on disk in big-endian order.
828  */
829 static inline void fid_cpu_to_le(struct lu_fid *dst, const struct lu_fid *src)
830 {
831         /* check that all fields are converted */
832         CLASSERT(sizeof *src ==
833                  sizeof fid_seq(src) +
834                  sizeof fid_oid(src) + sizeof fid_ver(src));
835         dst->f_seq = cpu_to_le64(fid_seq(src));
836         dst->f_oid = cpu_to_le32(fid_oid(src));
837         dst->f_ver = cpu_to_le32(fid_ver(src));
838 }
839
840 static inline void fid_le_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
841 {
842         /* check that all fields are converted */
843         CLASSERT(sizeof *src ==
844                  sizeof fid_seq(src) +
845                  sizeof fid_oid(src) + sizeof fid_ver(src));
846         dst->f_seq = le64_to_cpu(fid_seq(src));
847         dst->f_oid = le32_to_cpu(fid_oid(src));
848         dst->f_ver = le32_to_cpu(fid_ver(src));
849 }
850
851 static inline void fid_cpu_to_be(struct lu_fid *dst, const struct lu_fid *src)
852 {
853         /* check that all fields are converted */
854         CLASSERT(sizeof *src ==
855                  sizeof fid_seq(src) +
856                  sizeof fid_oid(src) + sizeof fid_ver(src));
857         dst->f_seq = cpu_to_be64(fid_seq(src));
858         dst->f_oid = cpu_to_be32(fid_oid(src));
859         dst->f_ver = cpu_to_be32(fid_ver(src));
860 }
861
862 static inline void fid_be_to_cpu(struct lu_fid *dst, const struct lu_fid *src)
863 {
864         /* check that all fields are converted */
865         CLASSERT(sizeof *src ==
866                  sizeof fid_seq(src) +
867                  sizeof fid_oid(src) + sizeof fid_ver(src));
868         dst->f_seq = be64_to_cpu(fid_seq(src));
869         dst->f_oid = be32_to_cpu(fid_oid(src));
870         dst->f_ver = be32_to_cpu(fid_ver(src));
871 }
872
873 static inline int fid_is_sane(const struct lu_fid *fid)
874 {
875         return fid != NULL &&
876                ((fid_seq(fid) >= FID_SEQ_START && fid_ver(fid) == 0) ||
877                 fid_is_igif(fid) || fid_is_idif(fid) ||
878                 fid_seq_is_rsvd(fid_seq(fid)));
879 }
880
881 static inline int fid_is_zero(const struct lu_fid *fid)
882 {
883         return fid_seq(fid) == 0 && fid_oid(fid) == 0;
884 }
885
886 extern void lustre_swab_lu_fid(struct lu_fid *fid);
887 extern void lustre_swab_lu_seq_range(struct lu_seq_range *range);
888
889 static inline int lu_fid_eq(const struct lu_fid *f0, const struct lu_fid *f1)
890 {
891         /* Check that there is no alignment padding. */
892         CLASSERT(sizeof *f0 ==
893                  sizeof f0->f_seq + sizeof f0->f_oid + sizeof f0->f_ver);
894         return memcmp(f0, f1, sizeof *f0) == 0;
895 }
896
897 #define __diff_normalize(val0, val1)                            \
898 ({                                                              \
899         typeof(val0) __val0 = (val0);                           \
900         typeof(val1) __val1 = (val1);                           \
901                                                                 \
902         (__val0 == __val1 ? 0 : __val0 > __val1 ? +1 : -1);     \
903 })
904
905 static inline int lu_fid_cmp(const struct lu_fid *f0,
906                              const struct lu_fid *f1)
907 {
908         return
909                 __diff_normalize(fid_seq(f0), fid_seq(f1)) ?:
910                 __diff_normalize(fid_oid(f0), fid_oid(f1)) ?:
911                 __diff_normalize(fid_ver(f0), fid_ver(f1));
912 }
913
914 static inline void ostid_cpu_to_le(struct ost_id *src_oi,
915                                    struct ost_id *dst_oi)
916 {
917         if (fid_seq_is_mdt0(ostid_seq(src_oi))) {
918                 dst_oi->oi.oi_id = cpu_to_le64(src_oi->oi.oi_id);
919                 dst_oi->oi.oi_seq = cpu_to_le64(src_oi->oi.oi_seq);
920         } else {
921                 fid_cpu_to_le(&dst_oi->oi_fid, &src_oi->oi_fid);
922         }
923 }
924
925 static inline void ostid_le_to_cpu(struct ost_id *src_oi,
926                                    struct ost_id *dst_oi)
927 {
928         if (fid_seq_is_mdt0(ostid_seq(src_oi))) {
929                 dst_oi->oi.oi_id = le64_to_cpu(src_oi->oi.oi_id);
930                 dst_oi->oi.oi_seq = le64_to_cpu(src_oi->oi.oi_seq);
931         } else {
932                 fid_le_to_cpu(&dst_oi->oi_fid, &src_oi->oi_fid);
933         }
934 }
935
936 /** @} lu_fid */
937
938 /** \defgroup lu_dir lu_dir
939  * @{ */
940
941 /**
942  * Enumeration of possible directory entry attributes.
943  *
944  * Attributes follow directory entry header in the order they appear in this
945  * enumeration.
946  */
947 enum lu_dirent_attrs {
948         LUDA_FID                = 0x0001,
949         LUDA_TYPE               = 0x0002,
950         LUDA_64BITHASH          = 0x0004,
951
952         /* The following attrs are used for MDT interanl only,
953          * not visible to client */
954
955         /* Verify the dirent consistency */
956         LUDA_VERIFY             = 0x8000,
957         /* Only check but not repair the dirent inconsistency */
958         LUDA_VERIFY_DRYRUN      = 0x4000,
959         /* The dirent has been repaired, or to be repaired (dryrun). */
960         LUDA_REPAIR             = 0x2000,
961         /* The system is upgraded, has beed or to be repaired (dryrun). */
962         LUDA_UPGRADE            = 0x1000,
963         /* Ignore this record, go to next directly. */
964         LUDA_IGNORE             = 0x0800,
965 };
966
967 #define LU_DIRENT_ATTRS_MASK    0xf800
968
969 /**
970  * Layout of readdir pages, as transmitted on wire.
971  */
972 struct lu_dirent {
973         /** valid if LUDA_FID is set. */
974         struct lu_fid lde_fid;
975         /** a unique entry identifier: a hash or an offset. */
976         __u64         lde_hash;
977         /** total record length, including all attributes. */
978         __u16         lde_reclen;
979         /** name length */
980         __u16         lde_namelen;
981         /** optional variable size attributes following this entry.
982          *  taken from enum lu_dirent_attrs.
983          */
984         __u32         lde_attrs;
985         /** name is followed by the attributes indicated in ->ldp_attrs, in
986          *  their natural order. After the last attribute, padding bytes are
987          *  added to make ->lde_reclen a multiple of 8.
988          */
989         char          lde_name[0];
990 };
991
992 /*
993  * Definitions of optional directory entry attributes formats.
994  *
995  * Individual attributes do not have their length encoded in a generic way. It
996  * is assumed that consumer of an attribute knows its format. This means that
997  * it is impossible to skip over an unknown attribute, except by skipping over all
998  * remaining attributes (by using ->lde_reclen), which is not too
999  * constraining, because new server versions will append new attributes at
1000  * the end of an entry.
1001  */
1002
1003 /**
1004  * Fid directory attribute: a fid of an object referenced by the entry. This
1005  * will be almost always requested by the client and supplied by the server.
1006  *
1007  * Aligned to 8 bytes.
1008  */
1009 /* To have compatibility with 1.8, lets have fid in lu_dirent struct. */
1010
1011 /**
1012  * File type.
1013  *
1014  * Aligned to 2 bytes.
1015  */
1016 struct luda_type {
1017         __u16 lt_type;
1018 };
1019
1020 struct lu_dirpage {
1021         __u64            ldp_hash_start;
1022         __u64            ldp_hash_end;
1023         __u32            ldp_flags;
1024         __u32            ldp_pad0;
1025         struct lu_dirent ldp_entries[0];
1026 };
1027
1028 enum lu_dirpage_flags {
1029         /**
1030          * dirpage contains no entry.
1031          */
1032         LDF_EMPTY   = 1 << 0,
1033         /**
1034          * last entry's lde_hash equals ldp_hash_end.
1035          */
1036         LDF_COLLIDE = 1 << 1
1037 };
1038
1039 static inline struct lu_dirent *lu_dirent_start(struct lu_dirpage *dp)
1040 {
1041         if (le32_to_cpu(dp->ldp_flags) & LDF_EMPTY)
1042                 return NULL;
1043         else
1044                 return dp->ldp_entries;
1045 }
1046
1047 static inline struct lu_dirent *lu_dirent_next(struct lu_dirent *ent)
1048 {
1049         struct lu_dirent *next;
1050
1051         if (le16_to_cpu(ent->lde_reclen) != 0)
1052                 next = ((void *)ent) + le16_to_cpu(ent->lde_reclen);
1053         else
1054                 next = NULL;
1055
1056         return next;
1057 }
1058
1059 static inline int lu_dirent_calc_size(int namelen, __u16 attr)
1060 {
1061         int size;
1062
1063         if (attr & LUDA_TYPE) {
1064                 const unsigned align = sizeof(struct luda_type) - 1;
1065                 size = (sizeof(struct lu_dirent) + namelen + align) & ~align;
1066                 size += sizeof(struct luda_type);
1067         } else
1068                 size = sizeof(struct lu_dirent) + namelen;
1069
1070         return (size + 7) & ~7;
1071 }
1072
1073 static inline int lu_dirent_size(struct lu_dirent *ent)
1074 {
1075         if (le16_to_cpu(ent->lde_reclen) == 0) {
1076                 return lu_dirent_calc_size(le16_to_cpu(ent->lde_namelen),
1077                                            le32_to_cpu(ent->lde_attrs));
1078         }
1079         return le16_to_cpu(ent->lde_reclen);
1080 }
1081
1082 #define MDS_DIR_END_OFF 0xfffffffffffffffeULL
1083
1084 /**
1085  * MDS_READPAGE page size
1086  *
1087  * This is the directory page size packed in MDS_READPAGE RPC.
1088  * It's different than CFS_PAGE_SIZE because the client needs to
1089  * access the struct lu_dirpage header packed at the beginning of
1090  * the "page" and without this there isn't any way to know find the
1091  * lu_dirpage header is if client and server CFS_PAGE_SIZE differ.
1092  */
1093 #define LU_PAGE_SHIFT 12
1094 #define LU_PAGE_SIZE  (1UL << LU_PAGE_SHIFT)
1095 #define LU_PAGE_MASK  (~(LU_PAGE_SIZE - 1))
1096
1097 #define LU_PAGE_COUNT (1 << (CFS_PAGE_SHIFT - LU_PAGE_SHIFT))
1098
1099 /** @} lu_dir */
1100
1101 struct lustre_handle {
1102         __u64 cookie;
1103 };
1104 #define DEAD_HANDLE_MAGIC 0xdeadbeefcafebabeULL
1105
1106 static inline int lustre_handle_is_used(struct lustre_handle *lh)
1107 {
1108         return lh->cookie != 0ull;
1109 }
1110
1111 static inline int lustre_handle_equal(const struct lustre_handle *lh1,
1112                                       const struct lustre_handle *lh2)
1113 {
1114         return lh1->cookie == lh2->cookie;
1115 }
1116
1117 static inline void lustre_handle_copy(struct lustre_handle *tgt,
1118                                       struct lustre_handle *src)
1119 {
1120         tgt->cookie = src->cookie;
1121 }
1122
1123 /* flags for lm_flags */
1124 #define MSGHDR_AT_SUPPORT               0x1
1125 #define MSGHDR_CKSUM_INCOMPAT18         0x2
1126
1127 #define lustre_msg lustre_msg_v2
1128 /* we depend on this structure to be 8-byte aligned */
1129 /* this type is only endian-adjusted in lustre_unpack_msg() */
1130 struct lustre_msg_v2 {
1131         __u32 lm_bufcount;
1132         __u32 lm_secflvr;
1133         __u32 lm_magic;
1134         __u32 lm_repsize;
1135         __u32 lm_cksum;
1136         __u32 lm_flags;
1137         __u32 lm_padding_2;
1138         __u32 lm_padding_3;
1139         __u32 lm_buflens[0];
1140 };
1141
1142 /* without gss, ptlrpc_body is put at the first buffer. */
1143 #define PTLRPC_NUM_VERSIONS     4
1144 #define JOBSTATS_JOBID_SIZE     32  /* 32 bytes string */
1145 struct ptlrpc_body_v3 {
1146         struct lustre_handle pb_handle;
1147         __u32 pb_type;
1148         __u32 pb_version;
1149         __u32 pb_opc;
1150         __u32 pb_status;
1151         __u64 pb_last_xid;
1152         __u64 pb_last_seen;
1153         __u64 pb_last_committed;
1154         __u64 pb_transno;
1155         __u32 pb_flags;
1156         __u32 pb_op_flags;
1157         __u32 pb_conn_cnt;
1158         __u32 pb_timeout;  /* for req, the deadline, for rep, the service est */
1159         __u32 pb_service_time; /* for rep, actual service time */
1160         __u32 pb_limit;
1161         __u64 pb_slv;
1162         /* VBR: pre-versions */
1163         __u64 pb_pre_versions[PTLRPC_NUM_VERSIONS];
1164         /* padding for future needs */
1165         __u64 pb_padding[4];
1166         char  pb_jobid[JOBSTATS_JOBID_SIZE];
1167 };
1168 #define ptlrpc_body     ptlrpc_body_v3
1169
1170 struct ptlrpc_body_v2 {
1171         struct lustre_handle pb_handle;
1172         __u32 pb_type;
1173         __u32 pb_version;
1174         __u32 pb_opc;
1175         __u32 pb_status;
1176         __u64 pb_last_xid;
1177         __u64 pb_last_seen;
1178         __u64 pb_last_committed;
1179         __u64 pb_transno;
1180         __u32 pb_flags;
1181         __u32 pb_op_flags;
1182         __u32 pb_conn_cnt;
1183         __u32 pb_timeout;  /* for req, the deadline, for rep, the service est */
1184         __u32 pb_service_time; /* for rep, actual service time, also used for
1185                                   net_latency of req */
1186         __u32 pb_limit;
1187         __u64 pb_slv;
1188         /* VBR: pre-versions */
1189         __u64 pb_pre_versions[PTLRPC_NUM_VERSIONS];
1190         /* padding for future needs */
1191         __u64 pb_padding[4];
1192 };
1193
1194 extern void lustre_swab_ptlrpc_body(struct ptlrpc_body *pb);
1195
1196 /* message body offset for lustre_msg_v2 */
1197 /* ptlrpc body offset in all request/reply messages */
1198 #define MSG_PTLRPC_BODY_OFF             0
1199
1200 /* normal request/reply message record offset */
1201 #define REQ_REC_OFF                     1
1202 #define REPLY_REC_OFF                   1
1203
1204 /* ldlm request message body offset */
1205 #define DLM_LOCKREQ_OFF                 1 /* lockreq offset */
1206 #define DLM_REQ_REC_OFF                 2 /* normal dlm request record offset */
1207
1208 /* ldlm intent lock message body offset */
1209 #define DLM_INTENT_IT_OFF               2 /* intent lock it offset */
1210 #define DLM_INTENT_REC_OFF              3 /* intent lock record offset */
1211
1212 /* ldlm reply message body offset */
1213 #define DLM_LOCKREPLY_OFF               1 /* lockrep offset */
1214 #define DLM_REPLY_REC_OFF               2 /* reply record offset */
1215
1216 /** only use in req->rq_{req,rep}_swab_mask */
1217 #define MSG_PTLRPC_HEADER_OFF           31
1218
1219 /* Flags that are operation-specific go in the top 16 bits. */
1220 #define MSG_OP_FLAG_MASK   0xffff0000
1221 #define MSG_OP_FLAG_SHIFT  16
1222
1223 /* Flags that apply to all requests are in the bottom 16 bits */
1224 #define MSG_GEN_FLAG_MASK     0x0000ffff
1225 #define MSG_LAST_REPLAY           0x0001
1226 #define MSG_RESENT                0x0002
1227 #define MSG_REPLAY                0x0004
1228 /* #define MSG_AT_SUPPORT         0x0008
1229  * This was used in early prototypes of adaptive timeouts, and while there
1230  * shouldn't be any users of that code there also isn't a need for using this
1231  * bits. Defer usage until at least 1.10 to avoid potential conflict. */
1232 #define MSG_DELAY_REPLAY          0x0010
1233 #define MSG_VERSION_REPLAY        0x0020
1234 #define MSG_REQ_REPLAY_DONE       0x0040
1235 #define MSG_LOCK_REPLAY_DONE      0x0080
1236
1237 /*
1238  * Flags for all connect opcodes (MDS_CONNECT, OST_CONNECT)
1239  */
1240
1241 #define MSG_CONNECT_RECOVERING  0x00000001
1242 #define MSG_CONNECT_RECONNECT   0x00000002
1243 #define MSG_CONNECT_REPLAYABLE  0x00000004
1244 //#define MSG_CONNECT_PEER        0x8
1245 #define MSG_CONNECT_LIBCLIENT   0x00000010
1246 #define MSG_CONNECT_INITIAL     0x00000020
1247 #define MSG_CONNECT_ASYNC       0x00000040
1248 #define MSG_CONNECT_NEXT_VER    0x00000080 /* use next version of lustre_msg */
1249 #define MSG_CONNECT_TRANSNO     0x00000100 /* report transno */
1250
1251 /* Connect flags */
1252 #define OBD_CONNECT_RDONLY                0x1ULL /*client has read-only access*/
1253 #define OBD_CONNECT_INDEX                 0x2ULL /*connect specific LOV idx */
1254 #define OBD_CONNECT_MDS                   0x4ULL /*connect from MDT to OST */
1255 #define OBD_CONNECT_GRANT                 0x8ULL /*OSC gets grant at connect */
1256 #define OBD_CONNECT_SRVLOCK              0x10ULL /*server takes locks for cli */
1257 #define OBD_CONNECT_VERSION              0x20ULL /*Lustre versions in ocd */
1258 #define OBD_CONNECT_REQPORTAL            0x40ULL /*Separate non-IO req portal */
1259 #define OBD_CONNECT_ACL                  0x80ULL /*access control lists */
1260 #define OBD_CONNECT_XATTR               0x100ULL /*client use extended attr */
1261 #define OBD_CONNECT_CROW                0x200ULL /*MDS+OST create obj on write*/
1262 #define OBD_CONNECT_TRUNCLOCK           0x400ULL /*locks on server for punch */
1263 #define OBD_CONNECT_TRANSNO             0x800ULL /*replay sends init transno */
1264 #define OBD_CONNECT_IBITS              0x1000ULL /*support for inodebits locks*/
1265 #define OBD_CONNECT_JOIN               0x2000ULL /*files can be concatenated.
1266                                                   *We do not support JOIN FILE
1267                                                   *anymore, reserve this flags
1268                                                   *just for preventing such bit
1269                                                   *to be reused.*/
1270 #define OBD_CONNECT_ATTRFID            0x4000ULL /*Server can GetAttr By Fid*/
1271 #define OBD_CONNECT_NODEVOH            0x8000ULL /*No open hndl on specl nodes*/
1272 #define OBD_CONNECT_RMT_CLIENT        0x10000ULL /*Remote client */
1273 #define OBD_CONNECT_RMT_CLIENT_FORCE  0x20000ULL /*Remote client by force */
1274 #define OBD_CONNECT_BRW_SIZE          0x40000ULL /*Max bytes per rpc */
1275 #define OBD_CONNECT_QUOTA64           0x80000ULL /*Not used since 2.4 */
1276 #define OBD_CONNECT_MDS_CAPA         0x100000ULL /*MDS capability */
1277 #define OBD_CONNECT_OSS_CAPA         0x200000ULL /*OSS capability */
1278 #define OBD_CONNECT_CANCELSET        0x400000ULL /*Early batched cancels. */
1279 #define OBD_CONNECT_SOM              0x800000ULL /*Size on MDS */
1280 #define OBD_CONNECT_AT              0x1000000ULL /*client uses AT */
1281 #define OBD_CONNECT_LRU_RESIZE      0x2000000ULL /*LRU resize feature. */
1282 #define OBD_CONNECT_MDS_MDS         0x4000000ULL /*MDS-MDS connection */
1283 #define OBD_CONNECT_REAL            0x8000000ULL /*real connection */
1284 #define OBD_CONNECT_CHANGE_QS      0x10000000ULL /*Not used since 2.4 */
1285 #define OBD_CONNECT_CKSUM          0x20000000ULL /*support several cksum algos*/
1286 #define OBD_CONNECT_FID            0x40000000ULL /*FID is supported by server */
1287 #define OBD_CONNECT_VBR            0x80000000ULL /*version based recovery */
1288 #define OBD_CONNECT_LOV_V3        0x100000000ULL /*client supports LOV v3 EA */
1289 #define OBD_CONNECT_GRANT_SHRINK  0x200000000ULL /* support grant shrink */
1290 #define OBD_CONNECT_SKIP_ORPHAN   0x400000000ULL /* don't reuse orphan objids */
1291 #define OBD_CONNECT_MAX_EASIZE    0x800000000ULL /* preserved for large EA */
1292 #define OBD_CONNECT_FULL20       0x1000000000ULL /* it is 2.0 client */
1293 #define OBD_CONNECT_LAYOUTLOCK   0x2000000000ULL /* client uses layout lock */
1294 #define OBD_CONNECT_64BITHASH    0x4000000000ULL /* client supports 64-bits
1295                                                   * directory hash */
1296 #define OBD_CONNECT_MAXBYTES     0x8000000000ULL /* max stripe size */
1297 #define OBD_CONNECT_IMP_RECOV   0x10000000000ULL /* imp recovery support */
1298 #define OBD_CONNECT_JOBSTATS    0x20000000000ULL /* jobid in ptlrpc_body */
1299 #define OBD_CONNECT_UMASK       0x40000000000ULL /* create uses client umask */
1300 #define OBD_CONNECT_EINPROGRESS 0x80000000000ULL /* client handles -EINPROGRESS
1301                                                   * RPC error properly */
1302 #define OBD_CONNECT_GRANT_PARAM 0x100000000000ULL/* extra grant params used for
1303                                                   * finer space reservation */
1304 #define OBD_CONNECT_FLOCK_OWNER 0x200000000000ULL /* for the fixed 1.8
1305                                                    * policy and 2.x server */
1306 #define OBD_CONNECT_LVB_TYPE    0x400000000000ULL /* variable type of LVB */
1307 #define OBD_CONNECT_NANOSEC_TIME 0x800000000000ULL /* nanosecond timestamps */
1308 #define OBD_CONNECT_LIGHTWEIGHT 0x1000000000000ULL/* lightweight connection */
1309 #define OBD_CONNECT_SHORTIO     0x2000000000000ULL/* short io */
1310 #define OBD_CONNECT_PINGLESS    0x4000000000000ULL/* pings not required */
1311 /* XXX README XXX:
1312  * Please DO NOT add flag values here before first ensuring that this same
1313  * flag value is not in use on some other branch.  Please clear any such
1314  * changes with senior engineers before starting to use a new flag.  Then,
1315  * submit a small patch against EVERY branch that ONLY adds the new flag,
1316  * updates obd_connect_names[] for lprocfs_rd_connect_flags(), adds the
1317  * flag to check_obd_connect_data(), and updates wiretests accordingly, so it
1318  * can be approved and landed easily to reserve the flag for future use. */
1319
1320 /* The MNE_SWAB flag is overloading the MDS_MDS bit only for the MGS
1321  * connection.  It is a temporary bug fix for Imperative Recovery interop
1322  * between 2.2 and 2.3 x86/ppc nodes, and can be removed when interop for
1323  * 2.2 clients/servers is no longer needed.  LU-1252/LU-1644. */
1324 #define OBD_CONNECT_MNE_SWAB             OBD_CONNECT_MDS_MDS
1325
1326 #define OCD_HAS_FLAG(ocd, flg)  \
1327         (!!((ocd)->ocd_connect_flags & OBD_CONNECT_##flg))
1328
1329
1330 #ifdef HAVE_LRU_RESIZE_SUPPORT
1331 #define LRU_RESIZE_CONNECT_FLAG OBD_CONNECT_LRU_RESIZE
1332 #else
1333 #define LRU_RESIZE_CONNECT_FLAG 0
1334 #endif
1335
1336 #define MDT_CONNECT_SUPPORTED  (OBD_CONNECT_RDONLY | OBD_CONNECT_VERSION | \
1337                                 OBD_CONNECT_ACL | OBD_CONNECT_XATTR | \
1338                                 OBD_CONNECT_IBITS | \
1339                                 OBD_CONNECT_NODEVOH | OBD_CONNECT_ATTRFID | \
1340                                 OBD_CONNECT_CANCELSET | OBD_CONNECT_AT | \
1341                                 OBD_CONNECT_RMT_CLIENT | \
1342                                 OBD_CONNECT_RMT_CLIENT_FORCE | \
1343                                 OBD_CONNECT_BRW_SIZE | OBD_CONNECT_MDS_CAPA | \
1344                                 OBD_CONNECT_OSS_CAPA | OBD_CONNECT_MDS_MDS | \
1345                                 OBD_CONNECT_FID | LRU_RESIZE_CONNECT_FLAG | \
1346                                 OBD_CONNECT_VBR | OBD_CONNECT_LOV_V3 | \
1347                                 OBD_CONNECT_SOM | OBD_CONNECT_FULL20 | \
1348                                 OBD_CONNECT_64BITHASH | OBD_CONNECT_JOBSTATS | \
1349                                 OBD_CONNECT_EINPROGRESS | \
1350                                 OBD_CONNECT_LIGHTWEIGHT | OBD_CONNECT_UMASK | \
1351                                 OBD_CONNECT_LVB_TYPE | OBD_CONNECT_LAYOUTLOCK |\
1352                                 OBD_CONNECT_PINGLESS)
1353 #define OST_CONNECT_SUPPORTED  (OBD_CONNECT_SRVLOCK | OBD_CONNECT_GRANT | \
1354                                 OBD_CONNECT_REQPORTAL | OBD_CONNECT_VERSION | \
1355                                 OBD_CONNECT_TRUNCLOCK | OBD_CONNECT_INDEX | \
1356                                 OBD_CONNECT_BRW_SIZE | OBD_CONNECT_OSS_CAPA | \
1357                                 OBD_CONNECT_CANCELSET | OBD_CONNECT_AT | \
1358                                 LRU_RESIZE_CONNECT_FLAG | OBD_CONNECT_CKSUM | \
1359                                 OBD_CONNECT_RMT_CLIENT | \
1360                                 OBD_CONNECT_RMT_CLIENT_FORCE | OBD_CONNECT_VBR | \
1361                                 OBD_CONNECT_MDS | OBD_CONNECT_SKIP_ORPHAN | \
1362                                 OBD_CONNECT_GRANT_SHRINK | OBD_CONNECT_FULL20 | \
1363                                 OBD_CONNECT_64BITHASH | OBD_CONNECT_MAXBYTES | \
1364                                 OBD_CONNECT_MAX_EASIZE | \
1365                                 OBD_CONNECT_EINPROGRESS | \
1366                                 OBD_CONNECT_JOBSTATS | \
1367                                 OBD_CONNECT_LIGHTWEIGHT | OBD_CONNECT_LVB_TYPE|\
1368                                 OBD_CONNECT_LAYOUTLOCK | OBD_CONNECT_FID | \
1369                                 OBD_CONNECT_PINGLESS)
1370 #define ECHO_CONNECT_SUPPORTED (0)
1371 #define MGS_CONNECT_SUPPORTED  (OBD_CONNECT_VERSION | OBD_CONNECT_AT | \
1372                                 OBD_CONNECT_FULL20 | OBD_CONNECT_IMP_RECOV | \
1373                                 OBD_CONNECT_MNE_SWAB | OBD_CONNECT_PINGLESS)
1374
1375 /* Features required for this version of the client to work with server */
1376 #define CLIENT_CONNECT_MDT_REQD (OBD_CONNECT_IBITS | OBD_CONNECT_FID | \
1377                                  OBD_CONNECT_FULL20)
1378
1379 #define OBD_OCD_VERSION(major,minor,patch,fix) (((major)<<24) + ((minor)<<16) +\
1380                                                 ((patch)<<8) + (fix))
1381 #define OBD_OCD_VERSION_MAJOR(version) ((int)((version)>>24)&255)
1382 #define OBD_OCD_VERSION_MINOR(version) ((int)((version)>>16)&255)
1383 #define OBD_OCD_VERSION_PATCH(version) ((int)((version)>>8)&255)
1384 #define OBD_OCD_VERSION_FIX(version)   ((int)(version)&255)
1385
1386 /* This structure is used for both request and reply.
1387  *
1388  * If we eventually have separate connect data for different types, which we
1389  * almost certainly will, then perhaps we stick a union in here. */
1390 struct obd_connect_data_v1 {
1391         __u64 ocd_connect_flags; /* OBD_CONNECT_* per above */
1392         __u32 ocd_version;       /* lustre release version number */
1393         __u32 ocd_grant;         /* initial cache grant amount (bytes) */
1394         __u32 ocd_index;         /* LOV index to connect to */
1395         __u32 ocd_brw_size;      /* Maximum BRW size in bytes, must be 2^n */
1396         __u64 ocd_ibits_known;   /* inode bits this client understands */
1397         __u8  ocd_blocksize;     /* log2 of the backend filesystem blocksize */
1398         __u8  ocd_inodespace;    /* log2 of the per-inode space consumption */
1399         __u16 ocd_grant_extent;  /* per-extent grant overhead, in 1K blocks */
1400         __u32 ocd_unused;        /* also fix lustre_swab_connect */
1401         __u64 ocd_transno;       /* first transno from client to be replayed */
1402         __u32 ocd_group;         /* MDS group on OST */
1403         __u32 ocd_cksum_types;   /* supported checksum algorithms */
1404         __u32 ocd_max_easize;    /* How big LOV EA can be on MDS */
1405         __u32 ocd_instance;      /* also fix lustre_swab_connect */
1406         __u64 ocd_maxbytes;      /* Maximum stripe size in bytes */
1407 };
1408
1409 struct obd_connect_data {
1410         __u64 ocd_connect_flags; /* OBD_CONNECT_* per above */
1411         __u32 ocd_version;       /* lustre release version number */
1412         __u32 ocd_grant;         /* initial cache grant amount (bytes) */
1413         __u32 ocd_index;         /* LOV index to connect to */
1414         __u32 ocd_brw_size;      /* Maximum BRW size in bytes */
1415         __u64 ocd_ibits_known;   /* inode bits this client understands */
1416         __u8  ocd_blocksize;     /* log2 of the backend filesystem blocksize */
1417         __u8  ocd_inodespace;    /* log2 of the per-inode space consumption */
1418         __u16 ocd_grant_extent;  /* per-extent grant overhead, in 1K blocks */
1419         __u32 ocd_unused;        /* also fix lustre_swab_connect */
1420         __u64 ocd_transno;       /* first transno from client to be replayed */
1421         __u32 ocd_group;         /* MDS group on OST */
1422         __u32 ocd_cksum_types;   /* supported checksum algorithms */
1423         __u32 ocd_max_easize;    /* How big LOV EA can be on MDS */
1424         __u32 ocd_instance;      /* instance # of this target */
1425         __u64 ocd_maxbytes;      /* Maximum stripe size in bytes */
1426         /* Fields after ocd_maxbytes are only accessible by the receiver
1427          * if the corresponding flag in ocd_connect_flags is set. Accessing
1428          * any field after ocd_maxbytes on the receiver without a valid flag
1429          * may result in out-of-bound memory access and kernel oops. */
1430         __u64 padding1;          /* added 2.1.0. also fix lustre_swab_connect */
1431         __u64 padding2;          /* added 2.1.0. also fix lustre_swab_connect */
1432         __u64 padding3;          /* added 2.1.0. also fix lustre_swab_connect */
1433         __u64 padding4;          /* added 2.1.0. also fix lustre_swab_connect */
1434         __u64 padding5;          /* added 2.1.0. also fix lustre_swab_connect */
1435         __u64 padding6;          /* added 2.1.0. also fix lustre_swab_connect */
1436         __u64 padding7;          /* added 2.1.0. also fix lustre_swab_connect */
1437         __u64 padding8;          /* added 2.1.0. also fix lustre_swab_connect */
1438         __u64 padding9;          /* added 2.1.0. also fix lustre_swab_connect */
1439         __u64 paddingA;          /* added 2.1.0. also fix lustre_swab_connect */
1440         __u64 paddingB;          /* added 2.1.0. also fix lustre_swab_connect */
1441         __u64 paddingC;          /* added 2.1.0. also fix lustre_swab_connect */
1442         __u64 paddingD;          /* added 2.1.0. also fix lustre_swab_connect */
1443         __u64 paddingE;          /* added 2.1.0. also fix lustre_swab_connect */
1444         __u64 paddingF;          /* added 2.1.0. also fix lustre_swab_connect */
1445 };
1446 /* XXX README XXX:
1447  * Please DO NOT use any fields here before first ensuring that this same
1448  * field is not in use on some other branch.  Please clear any such changes
1449  * with senior engineers before starting to use a new field.  Then, submit
1450  * a small patch against EVERY branch that ONLY adds the new field along with
1451  * the matching OBD_CONNECT flag, so that can be approved and landed easily to
1452  * reserve the flag for future use. */
1453
1454
1455 extern void lustre_swab_connect(struct obd_connect_data *ocd);
1456
1457 /*
1458  * Supported checksum algorithms. Up to 32 checksum types are supported.
1459  * (32-bit mask stored in obd_connect_data::ocd_cksum_types)
1460  * Please update DECLARE_CKSUM_NAME/OBD_CKSUM_ALL in obd.h when adding a new
1461  * algorithm and also the OBD_FL_CKSUM* flags.
1462  */
1463 typedef enum {
1464         OBD_CKSUM_CRC32 = 0x00000001,
1465         OBD_CKSUM_ADLER = 0x00000002,
1466         OBD_CKSUM_CRC32C= 0x00000004,
1467 } cksum_type_t;
1468
1469 /*
1470  *   OST requests: OBDO & OBD request records
1471  */
1472
1473 /* opcodes */
1474 typedef enum {
1475         OST_REPLY      =  0,       /* reply ? */
1476         OST_GETATTR    =  1,
1477         OST_SETATTR    =  2,
1478         OST_READ       =  3,
1479         OST_WRITE      =  4,
1480         OST_CREATE     =  5,
1481         OST_DESTROY    =  6,
1482         OST_GET_INFO   =  7,
1483         OST_CONNECT    =  8,
1484         OST_DISCONNECT =  9,
1485         OST_PUNCH      = 10,
1486         OST_OPEN       = 11,
1487         OST_CLOSE      = 12,
1488         OST_STATFS     = 13,
1489         OST_SYNC       = 16,
1490         OST_SET_INFO   = 17,
1491         OST_QUOTACHECK = 18,
1492         OST_QUOTACTL   = 19,
1493         OST_QUOTA_ADJUST_QUNIT = 20, /* not used since 2.4 */
1494         OST_LAST_OPC
1495 } ost_cmd_t;
1496 #define OST_FIRST_OPC  OST_REPLY
1497
1498 enum obdo_flags {
1499         OBD_FL_INLINEDATA   = 0x00000001,
1500         OBD_FL_OBDMDEXISTS  = 0x00000002,
1501         OBD_FL_DELORPHAN    = 0x00000004, /* if set in o_flags delete orphans */
1502         OBD_FL_NORPC        = 0x00000008, /* set in o_flags do in OSC not OST */
1503         OBD_FL_IDONLY       = 0x00000010, /* set in o_flags only adjust obj id*/
1504         OBD_FL_RECREATE_OBJS= 0x00000020, /* recreate missing obj */
1505         OBD_FL_DEBUG_CHECK  = 0x00000040, /* echo client/server debug check */
1506         OBD_FL_NO_USRQUOTA  = 0x00000100, /* the object's owner is over quota */
1507         OBD_FL_NO_GRPQUOTA  = 0x00000200, /* the object's group is over quota */
1508         OBD_FL_CREATE_CROW  = 0x00000400, /* object should be create on write */
1509         OBD_FL_SRVLOCK      = 0x00000800, /* delegate DLM locking to server */
1510         OBD_FL_CKSUM_CRC32  = 0x00001000, /* CRC32 checksum type */
1511         OBD_FL_CKSUM_ADLER  = 0x00002000, /* ADLER checksum type */
1512         OBD_FL_CKSUM_CRC32C = 0x00004000, /* CRC32C checksum type */
1513         OBD_FL_CKSUM_RSVD2  = 0x00008000, /* for future cksum types */
1514         OBD_FL_CKSUM_RSVD3  = 0x00010000, /* for future cksum types */
1515         OBD_FL_SHRINK_GRANT = 0x00020000, /* object shrink the grant */
1516         OBD_FL_MMAP         = 0x00040000, /* object is mmapped on the client.
1517                                            * XXX: obsoleted - reserved for old
1518                                            * clients prior than 2.2 */
1519         OBD_FL_RECOV_RESEND = 0x00080000, /* recoverable resent */
1520         OBD_FL_NOSPC_BLK    = 0x00100000, /* no more block space on OST */
1521
1522         /* Note that while these checksum values are currently separate bits,
1523          * in 2.x we can actually allow all values from 1-31 if we wanted. */
1524         OBD_FL_CKSUM_ALL    = OBD_FL_CKSUM_CRC32 | OBD_FL_CKSUM_ADLER |
1525                               OBD_FL_CKSUM_CRC32C,
1526
1527         /* mask for local-only flag, which won't be sent over network */
1528         OBD_FL_LOCAL_MASK   = 0xF0000000,
1529 };
1530
1531 #define LOV_MAGIC_V1      0x0BD10BD0
1532 #define LOV_MAGIC         LOV_MAGIC_V1
1533 #define LOV_MAGIC_JOIN_V1 0x0BD20BD0
1534 #define LOV_MAGIC_V3      0x0BD30BD0
1535
1536 /*
1537  * magic for fully defined striping
1538  * the idea is that we should have different magics for striping "hints"
1539  * (struct lov_user_md_v[13]) and defined ready-to-use striping (struct
1540  * lov_mds_md_v[13]). at the moment the magics are used in wire protocol,
1541  * we can't just change it w/o long way preparation, but we still need a
1542  * mechanism to allow LOD to differentiate hint versus ready striping.
1543  * so, at the moment we do a trick: MDT knows what to expect from request
1544  * depending on the case (replay uses ready striping, non-replay req uses
1545  * hints), so MDT replaces magic with appropriate one and now LOD can
1546  * easily understand what's inside -bzzz
1547  */
1548 #define LOV_MAGIC_V1_DEF  0x0CD10BD0
1549 #define LOV_MAGIC_V3_DEF  0x0CD30BD0
1550
1551 #define LOV_PATTERN_RAID0 0x001   /* stripes are used round-robin */
1552 #define LOV_PATTERN_RAID1 0x002   /* stripes are mirrors of each other */
1553 #define LOV_PATTERN_FIRST 0x100   /* first stripe is not in round-robin */
1554 #define LOV_PATTERN_CMOBD 0x200
1555
1556 #define lov_ost_data lov_ost_data_v1
1557 struct lov_ost_data_v1 {          /* per-stripe data structure (little-endian)*/
1558         struct ost_id l_ost_oi;   /* OST object ID */
1559         __u32 l_ost_gen;          /* generation of this l_ost_idx */
1560         __u32 l_ost_idx;          /* OST index in LOV (lov_tgt_desc->tgts) */
1561 };
1562
1563 #define lov_mds_md lov_mds_md_v1
1564 struct lov_mds_md_v1 {            /* LOV EA mds/wire data (little-endian) */
1565         __u32 lmm_magic;          /* magic number = LOV_MAGIC_V1 */
1566         __u32 lmm_pattern;        /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1567         struct ost_id   lmm_oi;   /* LOV object ID */
1568         __u32 lmm_stripe_size;    /* size of stripe in bytes */
1569         /* lmm_stripe_count used to be __u32 */
1570         __u16 lmm_stripe_count;   /* num stripes in use for this object */
1571         __u16 lmm_layout_gen;     /* layout generation number */
1572         struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1573 };
1574
1575 /**
1576  * Sigh, because pre-2.4 uses
1577  * struct lov_mds_md_v1 {
1578  *      ........
1579  *      __u64 lmm_object_id;
1580  *      __u64 lmm_object_seq;
1581  *      ......
1582  *      }
1583  * to identify the LOV(MDT) object, and lmm_object_seq will
1584  * be normal_fid, which make it hard to combine these conversion
1585  * to ostid_to FID. so we will do lmm_oi/fid conversion separately
1586  *
1587  * We can tell the lmm_oi by this way,
1588  * 1.8: lmm_object_id = {inode}, lmm_object_gr = 0
1589  * 2.1: lmm_object_id = {oid < 128k}, lmm_object_seq = FID_SEQ_NORMAL
1590  * 2.4: lmm_oi.f_seq = FID_SEQ_NORMAL, lmm_oi.f_oid = {oid < 128k},
1591  *      lmm_oi.f_ver = 0
1592  *
1593  * But currently lmm_oi/lsm_oi does not have any "real" usages,
1594  * except for printing some information, and the user can always
1595  * get the real FID from LMA, besides this multiple case check might
1596  * make swab more complicate. So we will keep using id/seq for lmm_oi.
1597  */
1598
1599 static inline void fid_to_lmm_oi(const struct lu_fid *fid,
1600                                  struct ost_id *oi)
1601 {
1602         oi->oi.oi_id = fid_oid(fid);
1603         oi->oi.oi_seq = fid_seq(fid);
1604 }
1605
1606 static inline void lmm_oi_set_seq(struct ost_id *oi, __u64 seq)
1607 {
1608         oi->oi.oi_seq = seq;
1609 }
1610
1611 static inline __u64 lmm_oi_id(struct ost_id *oi)
1612 {
1613         return oi->oi.oi_id;
1614 }
1615
1616 static inline __u64 lmm_oi_seq(struct ost_id *oi)
1617 {
1618         return oi->oi.oi_seq;
1619 }
1620
1621 static inline void lmm_oi_le_to_cpu(struct ost_id *dst_oi,
1622                                     struct ost_id *src_oi)
1623 {
1624         dst_oi->oi.oi_id = le64_to_cpu(src_oi->oi.oi_id);
1625         dst_oi->oi.oi_seq = le64_to_cpu(src_oi->oi.oi_seq);
1626 }
1627
1628 static inline void lmm_oi_cpu_to_le(struct ost_id *dst_oi,
1629                                     struct ost_id *src_oi)
1630 {
1631         dst_oi->oi.oi_id = cpu_to_le64(src_oi->oi.oi_id);
1632         dst_oi->oi.oi_seq = cpu_to_le64(src_oi->oi.oi_seq);
1633 }
1634
1635 /* extern void lustre_swab_lov_mds_md(struct lov_mds_md *llm); */
1636
1637 #define MAX_MD_SIZE (sizeof(struct lov_mds_md) + 4 * sizeof(struct lov_ost_data))
1638 #define MIN_MD_SIZE (sizeof(struct lov_mds_md) + 1 * sizeof(struct lov_ost_data))
1639
1640 #define XATTR_NAME_ACL_ACCESS   "system.posix_acl_access"
1641 #define XATTR_NAME_ACL_DEFAULT  "system.posix_acl_default"
1642 #define XATTR_USER_PREFIX       "user."
1643 #define XATTR_TRUSTED_PREFIX    "trusted."
1644 #define XATTR_SECURITY_PREFIX   "security."
1645 #define XATTR_LUSTRE_PREFIX     "lustre."
1646
1647 #define XATTR_NAME_LOV          "trusted.lov"
1648 #define XATTR_NAME_LMA          "trusted.lma"
1649 #define XATTR_NAME_LMV          "trusted.lmv"
1650 #define XATTR_NAME_LINK         "trusted.link"
1651 #define XATTR_NAME_FID          "trusted.fid"
1652 #define XATTR_NAME_VERSION      "trusted.version"
1653 #define XATTR_NAME_SOM          "trusted.som"
1654 #define XATTR_NAME_HSM          "trusted.hsm"
1655 #define XATTR_NAME_LFSCK_NAMESPACE "trusted.lfsck_namespace"
1656
1657 struct lov_mds_md_v3 {            /* LOV EA mds/wire data (little-endian) */
1658         __u32 lmm_magic;          /* magic number = LOV_MAGIC_V3 */
1659         __u32 lmm_pattern;        /* LOV_PATTERN_RAID0, LOV_PATTERN_RAID1 */
1660         struct ost_id   lmm_oi;   /* LOV object ID */
1661         __u32 lmm_stripe_size;    /* size of stripe in bytes */
1662         /* lmm_stripe_count used to be __u32 */
1663         __u16 lmm_stripe_count;   /* num stripes in use for this object */
1664         __u16 lmm_layout_gen;     /* layout generation number */
1665         char  lmm_pool_name[LOV_MAXPOOLNAME]; /* must be 32bit aligned */
1666         struct lov_ost_data_v1 lmm_objects[0]; /* per-stripe data */
1667 };
1668
1669 #define OBD_MD_FLID        (0x00000001ULL) /* object ID */
1670 #define OBD_MD_FLATIME     (0x00000002ULL) /* access time */
1671 #define OBD_MD_FLMTIME     (0x00000004ULL) /* data modification time */
1672 #define OBD_MD_FLCTIME     (0x00000008ULL) /* change time */
1673 #define OBD_MD_FLSIZE      (0x00000010ULL) /* size */
1674 #define OBD_MD_FLBLOCKS    (0x00000020ULL) /* allocated blocks count */
1675 #define OBD_MD_FLBLKSZ     (0x00000040ULL) /* block size */
1676 #define OBD_MD_FLMODE      (0x00000080ULL) /* access bits (mode & ~S_IFMT) */
1677 #define OBD_MD_FLTYPE      (0x00000100ULL) /* object type (mode & S_IFMT) */
1678 #define OBD_MD_FLUID       (0x00000200ULL) /* user ID */
1679 #define OBD_MD_FLGID       (0x00000400ULL) /* group ID */
1680 #define OBD_MD_FLFLAGS     (0x00000800ULL) /* flags word */
1681 #define OBD_MD_FLNLINK     (0x00002000ULL) /* link count */
1682 #define OBD_MD_FLGENER     (0x00004000ULL) /* generation number */
1683 /*#define OBD_MD_FLINLINE    (0x00008000ULL)  inline data. used until 1.6.5 */
1684 #define OBD_MD_FLRDEV      (0x00010000ULL) /* device number */
1685 #define OBD_MD_FLEASIZE    (0x00020000ULL) /* extended attribute data */
1686 #define OBD_MD_LINKNAME    (0x00040000ULL) /* symbolic link target */
1687 #define OBD_MD_FLHANDLE    (0x00080000ULL) /* file/lock handle */
1688 #define OBD_MD_FLCKSUM     (0x00100000ULL) /* bulk data checksum */
1689 #define OBD_MD_FLQOS       (0x00200000ULL) /* quality of service stats */
1690 /*#define OBD_MD_FLOSCOPQ    (0x00400000ULL) osc opaque data, never used */
1691 #define OBD_MD_FLCOOKIE    (0x00800000ULL) /* log cancellation cookie */
1692 #define OBD_MD_FLGROUP     (0x01000000ULL) /* group */
1693 #define OBD_MD_FLFID       (0x02000000ULL) /* ->ost write inline fid */
1694 #define OBD_MD_FLEPOCH     (0x04000000ULL) /* ->ost write with ioepoch */
1695                                            /* ->mds if epoch opens or closes */
1696 #define OBD_MD_FLGRANT     (0x08000000ULL) /* ost preallocation space grant */
1697 #define OBD_MD_FLDIREA     (0x10000000ULL) /* dir's extended attribute data */
1698 #define OBD_MD_FLUSRQUOTA  (0x20000000ULL) /* over quota flags sent from ost */
1699 #define OBD_MD_FLGRPQUOTA  (0x40000000ULL) /* over quota flags sent from ost */
1700 #define OBD_MD_FLMODEASIZE (0x80000000ULL) /* EA size will be changed */
1701
1702 #define OBD_MD_MDS         (0x0000000100000000ULL) /* where an inode lives on */
1703 #define OBD_MD_REINT       (0x0000000200000000ULL) /* reintegrate oa */
1704 #define OBD_MD_MEA         (0x0000000400000000ULL) /* CMD split EA  */
1705
1706 /* OBD_MD_MDTIDX is used to get MDT index, but it is never been used overwire,
1707  * and it is already obsolete since 2.3 */
1708 /* #define OBD_MD_MDTIDX      (0x0000000800000000ULL) */
1709
1710 #define OBD_MD_FLXATTR       (0x0000001000000000ULL) /* xattr */
1711 #define OBD_MD_FLXATTRLS     (0x0000002000000000ULL) /* xattr list */
1712 #define OBD_MD_FLXATTRRM     (0x0000004000000000ULL) /* xattr remove */
1713 #define OBD_MD_FLACL         (0x0000008000000000ULL) /* ACL */
1714 #define OBD_MD_FLRMTPERM     (0x0000010000000000ULL) /* remote permission */
1715 #define OBD_MD_FLMDSCAPA     (0x0000020000000000ULL) /* MDS capability */
1716 #define OBD_MD_FLOSSCAPA     (0x0000040000000000ULL) /* OSS capability */
1717 #define OBD_MD_FLCKSPLIT     (0x0000080000000000ULL) /* Check split on server */
1718 #define OBD_MD_FLCROSSREF    (0x0000100000000000ULL) /* Cross-ref case */
1719 #define OBD_MD_FLGETATTRLOCK (0x0000200000000000ULL) /* Get IOEpoch attributes
1720                                                       * under lock */
1721 #define OBD_MD_FLOBJCOUNT    (0x0000400000000000ULL) /* for multiple destroy */
1722
1723 #define OBD_MD_FLRMTLSETFACL (0x0001000000000000ULL) /* lfs lsetfacl case */
1724 #define OBD_MD_FLRMTLGETFACL (0x0002000000000000ULL) /* lfs lgetfacl case */
1725 #define OBD_MD_FLRMTRSETFACL (0x0004000000000000ULL) /* lfs rsetfacl case */
1726 #define OBD_MD_FLRMTRGETFACL (0x0008000000000000ULL) /* lfs rgetfacl case */
1727
1728 #define OBD_MD_FLDATAVERSION (0x0010000000000000ULL) /* iversion sum */
1729
1730 #define OBD_MD_FLGETATTR (OBD_MD_FLID    | OBD_MD_FLATIME | OBD_MD_FLMTIME | \
1731                           OBD_MD_FLCTIME | OBD_MD_FLSIZE  | OBD_MD_FLBLKSZ | \
1732                           OBD_MD_FLMODE  | OBD_MD_FLTYPE  | OBD_MD_FLUID   | \
1733                           OBD_MD_FLGID   | OBD_MD_FLFLAGS | OBD_MD_FLNLINK | \
1734                           OBD_MD_FLGENER | OBD_MD_FLRDEV  | OBD_MD_FLGROUP)
1735
1736 /* don't forget obdo_fid which is way down at the bottom so it can
1737  * come after the definition of llog_cookie */
1738
1739 enum hss_valid {
1740         HSS_SETMASK     = 0x01,
1741         HSS_CLEARMASK   = 0x02,
1742         HSS_ARCHIVE_ID  = 0x04,
1743 };
1744
1745 struct hsm_state_set {
1746         __u32   hss_valid;
1747         __u32   hss_archive_id;
1748         __u64   hss_setmask;
1749         __u64   hss_clearmask;
1750 };
1751
1752 extern void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
1753 extern void lustre_swab_hsm_state_set(struct hsm_state_set *hss);
1754
1755 extern void lustre_swab_obd_statfs (struct obd_statfs *os);
1756
1757 /* ost_body.data values for OST_BRW */
1758
1759 #define OBD_BRW_READ            0x01
1760 #define OBD_BRW_WRITE           0x02
1761 #define OBD_BRW_RWMASK          (OBD_BRW_READ | OBD_BRW_WRITE)
1762 #define OBD_BRW_SYNC            0x08 /* this page is a part of synchronous
1763                                       * transfer and is not accounted in
1764                                       * the grant. */
1765 #define OBD_BRW_CHECK           0x10
1766 #define OBD_BRW_FROM_GRANT      0x20 /* the osc manages this under llite */
1767 #define OBD_BRW_GRANTED         0x40 /* the ost manages this */
1768 #define OBD_BRW_NOCACHE         0x80 /* this page is a part of non-cached IO */
1769 #define OBD_BRW_NOQUOTA        0x100
1770 #define OBD_BRW_SRVLOCK        0x200 /* Client holds no lock over this page */
1771 #define OBD_BRW_ASYNC          0x400 /* Server may delay commit to disk */
1772 #define OBD_BRW_MEMALLOC       0x800 /* Client runs in the "kswapd" context */
1773 #define OBD_BRW_OVER_USRQUOTA 0x1000 /* Running out of user quota */
1774 #define OBD_BRW_OVER_GRPQUOTA 0x2000 /* Running out of group quota */
1775
1776 #define OBD_OBJECT_EOF 0xffffffffffffffffULL
1777
1778 #define OST_MIN_PRECREATE 32
1779 #define OST_MAX_PRECREATE 20000
1780
1781 struct obd_ioobj {
1782         struct ost_id   ioo_oid;        /* object ID, if multi-obj BRW */
1783         __u32           ioo_max_brw;    /* low 16 bits were o_mode before 2.4,
1784                                          * now (PTLRPC_BULK_OPS_COUNT - 1) in
1785                                          * high 16 bits in 2.4 and later */
1786         __u32           ioo_bufcnt;     /* number of niobufs for this object */
1787 };
1788
1789 #define IOOBJ_MAX_BRW_BITS      16
1790 #define IOOBJ_TYPE_MASK         ((1U << IOOBJ_MAX_BRW_BITS) - 1)
1791 #define ioobj_max_brw_get(ioo)  (((ioo)->ioo_max_brw >> IOOBJ_MAX_BRW_BITS) + 1)
1792 #define ioobj_max_brw_set(ioo, num)                                     \
1793 do { (ioo)->ioo_max_brw = ((num) - 1) << IOOBJ_MAX_BRW_BITS; } while (0)
1794
1795 extern void lustre_swab_obd_ioobj (struct obd_ioobj *ioo);
1796
1797 /* multiple of 8 bytes => can array */
1798 struct niobuf_remote {
1799         __u64 offset;
1800         __u32 len;
1801         __u32 flags;
1802 };
1803
1804 extern void lustre_swab_niobuf_remote (struct niobuf_remote *nbr);
1805
1806 /* lock value block communicated between the filter and llite */
1807
1808 /* OST_LVB_ERR_INIT is needed because the return code in rc is
1809  * negative, i.e. because ((MASK + rc) & MASK) != MASK. */
1810 #define OST_LVB_ERR_INIT 0xffbadbad80000000ULL
1811 #define OST_LVB_ERR_MASK 0xffbadbad00000000ULL
1812 #define OST_LVB_IS_ERR(blocks)                                          \
1813         ((blocks & OST_LVB_ERR_MASK) == OST_LVB_ERR_MASK)
1814 #define OST_LVB_SET_ERR(blocks, rc)                                     \
1815         do { blocks = OST_LVB_ERR_INIT + rc; } while (0)
1816 #define OST_LVB_GET_ERR(blocks)    (int)(blocks - OST_LVB_ERR_INIT)
1817
1818 struct ost_lvb_v1 {
1819         __u64           lvb_size;
1820         obd_time        lvb_mtime;
1821         obd_time        lvb_atime;
1822         obd_time        lvb_ctime;
1823         __u64           lvb_blocks;
1824 };
1825
1826 extern void lustre_swab_ost_lvb_v1(struct ost_lvb_v1 *lvb);
1827
1828 struct ost_lvb {
1829         __u64           lvb_size;
1830         obd_time        lvb_mtime;
1831         obd_time        lvb_atime;
1832         obd_time        lvb_ctime;
1833         __u64           lvb_blocks;
1834         __u32           lvb_mtime_ns;
1835         __u32           lvb_atime_ns;
1836         __u32           lvb_ctime_ns;
1837         __u32           lvb_padding;
1838 };
1839
1840 extern void lustre_swab_ost_lvb(struct ost_lvb *lvb);
1841
1842 /*
1843  *   lquota data structures
1844  */
1845
1846 #ifndef QUOTABLOCK_BITS
1847 #define QUOTABLOCK_BITS 10
1848 #endif
1849
1850 #ifndef QUOTABLOCK_SIZE
1851 #define QUOTABLOCK_SIZE (1 << QUOTABLOCK_BITS)
1852 #endif
1853
1854 #ifndef toqb
1855 #define toqb(x) (((x) + QUOTABLOCK_SIZE - 1) >> QUOTABLOCK_BITS)
1856 #endif
1857
1858 /* The lquota_id structure is an union of all the possible identifier types that
1859  * can be used with quota, this includes:
1860  * - 64-bit user ID
1861  * - 64-bit group ID
1862  * - a FID which can be used for per-directory quota in the future */
1863 union lquota_id {
1864         struct lu_fid   qid_fid; /* FID for per-directory quota */
1865         __u64           qid_uid; /* user identifier */
1866         __u64           qid_gid; /* group identifier */
1867 };
1868
1869 /* quotactl management */
1870 struct obd_quotactl {
1871         __u32                   qc_cmd;
1872         __u32                   qc_type; /* see Q_* flag below */
1873         __u32                   qc_id;
1874         __u32                   qc_stat;
1875         struct obd_dqinfo       qc_dqinfo;
1876         struct obd_dqblk        qc_dqblk;
1877 };
1878
1879 extern void lustre_swab_obd_quotactl(struct obd_quotactl *q);
1880
1881 #define Q_QUOTACHECK    0x800100 /* deprecated as of 2.4 */
1882 #define Q_INITQUOTA     0x800101 /* deprecated as of 2.4  */
1883 #define Q_GETOINFO      0x800102 /* get obd quota info */
1884 #define Q_GETOQUOTA     0x800103 /* get obd quotas */
1885 #define Q_FINVALIDATE   0x800104 /* deprecated as of 2.4 */
1886
1887 #define Q_COPY(out, in, member) (out)->member = (in)->member
1888
1889 #define QCTL_COPY(out, in)              \
1890 do {                                    \
1891         Q_COPY(out, in, qc_cmd);        \
1892         Q_COPY(out, in, qc_type);       \
1893         Q_COPY(out, in, qc_id);         \
1894         Q_COPY(out, in, qc_stat);       \
1895         Q_COPY(out, in, qc_dqinfo);     \
1896         Q_COPY(out, in, qc_dqblk);      \
1897 } while (0)
1898
1899 /* Body of quota request used for quota acquire/release RPCs between quota
1900  * master (aka QMT) and slaves (ak QSD). */
1901 struct quota_body {
1902         struct lu_fid   qb_fid;     /* FID of global index packing the pool ID
1903                                       * and type (data or metadata) as well as
1904                                       * the quota type (user or group). */
1905         union lquota_id qb_id;      /* uid or gid or directory FID */
1906         __u32           qb_flags;   /* see below */
1907         __u32           qb_padding;
1908         __u64           qb_count;   /* acquire/release count (kbytes/inodes) */
1909         __u64           qb_usage;   /* current slave usage (kbytes/inodes) */
1910         __u64           qb_slv_ver; /* slave index file version */
1911         struct lustre_handle    qb_lockh;     /* per-ID lock handle */
1912         struct lustre_handle    qb_glb_lockh; /* global lock handle */
1913         __u64           qb_padding1[4];
1914 };
1915
1916 /* When the quota_body is used in the reply of quota global intent
1917  * lock (IT_QUOTA_CONN) reply, qb_fid contains slave index file FID. */
1918 #define qb_slv_fid      qb_fid
1919 /* qb_usage is the current qunit (in kbytes/inodes) when quota_body is used in
1920  * quota reply */
1921 #define qb_qunit        qb_usage
1922
1923 #define QUOTA_DQACQ_FL_ACQ      0x1  /* acquire quota */
1924 #define QUOTA_DQACQ_FL_PREACQ   0x2  /* pre-acquire */
1925 #define QUOTA_DQACQ_FL_REL      0x4  /* release quota */
1926 #define QUOTA_DQACQ_FL_REPORT   0x8  /* report usage */
1927
1928 extern void lustre_swab_quota_body(struct quota_body *b);
1929
1930 /* Quota types currently supported */
1931 enum {
1932         LQUOTA_TYPE_USR = 0x00, /* maps to USRQUOTA */
1933         LQUOTA_TYPE_GRP = 0x01, /* maps to GRPQUOTA */
1934         LQUOTA_TYPE_MAX
1935 };
1936
1937 /* There are 2 different resource types on which a quota limit can be enforced:
1938  * - inodes on the MDTs
1939  * - blocks on the OSTs */
1940 enum {
1941         LQUOTA_RES_MD           = 0x01, /* skip 0 to avoid null oid in FID */
1942         LQUOTA_RES_DT           = 0x02,
1943         LQUOTA_LAST_RES,
1944         LQUOTA_FIRST_RES        = LQUOTA_RES_MD
1945 };
1946 #define LQUOTA_NR_RES (LQUOTA_LAST_RES - LQUOTA_FIRST_RES + 1)
1947
1948 /*
1949  * Space accounting support
1950  * Format of an accounting record, providing disk usage information for a given
1951  * user or group
1952  */
1953 struct lquota_acct_rec { /* 16 bytes */
1954         __u64 bspace;  /* current space in use */
1955         __u64 ispace;  /* current # inodes in use */
1956 };
1957
1958 /*
1959  * Global quota index support
1960  * Format of a global record, providing global quota settings for a given quota
1961  * identifier
1962  */
1963 struct lquota_glb_rec { /* 32 bytes */
1964         __u64 qbr_hardlimit; /* quota hard limit, in #inodes or kbytes */
1965         __u64 qbr_softlimit; /* quota soft limit, in #inodes or kbytes */
1966         __u64 qbr_time;      /* grace time, in seconds */
1967         __u64 qbr_granted;   /* how much is granted to slaves, in #inodes or
1968                               * kbytes */
1969 };
1970
1971 /*
1972  * Slave index support
1973  * Format of a slave record, recording how much space is granted to a given
1974  * slave
1975  */
1976 struct lquota_slv_rec { /* 8 bytes */
1977         __u64 qsr_granted; /* space granted to the slave for the key=ID,
1978                             * in #inodes or kbytes */
1979 };
1980
1981 /* Data structures associated with the quota locks */
1982
1983 /* Glimpse descriptor used for the index & per-ID quota locks */
1984 struct ldlm_gl_lquota_desc {
1985         union lquota_id gl_id;    /* quota ID subject to the glimpse */
1986         __u64           gl_flags; /* see LQUOTA_FL* below */
1987         __u64           gl_ver;   /* new index version */
1988         __u64           gl_hardlimit; /* new hardlimit or qunit value */
1989         __u64           gl_softlimit; /* new softlimit */
1990         __u64           gl_time;
1991         __u64           gl_pad2;
1992 };
1993 #define gl_qunit        gl_hardlimit /* current qunit value used when
1994                                       * glimpsing per-ID quota locks */
1995
1996 /* quota glimpse flags */
1997 #define LQUOTA_FL_EDQUOT 0x1 /* user/group out of quota space on QMT */
1998
1999 /* LVB used with quota (global and per-ID) locks */
2000 struct lquota_lvb {
2001         __u64   lvb_flags;      /* see LQUOTA_FL* above */
2002         __u64   lvb_id_may_rel; /* space that might be released later */
2003         __u64   lvb_id_rel;     /* space released by the slave for this ID */
2004         __u64   lvb_id_qunit;   /* current qunit value */
2005         __u64   lvb_pad1;
2006 };
2007
2008 extern void lustre_swab_lquota_lvb(struct lquota_lvb *lvb);
2009
2010 /* LVB used with global quota lock */
2011 #define lvb_glb_ver  lvb_id_may_rel /* current version of the global index */
2012
2013 /* op codes */
2014 typedef enum {
2015         QUOTA_DQACQ     = 601,
2016         QUOTA_DQREL     = 602,
2017         QUOTA_LAST_OPC
2018 } quota_cmd_t;
2019 #define QUOTA_FIRST_OPC QUOTA_DQACQ
2020
2021 /*
2022  *   MDS REQ RECORDS
2023  */
2024
2025 /* opcodes */
2026 typedef enum {
2027         MDS_GETATTR             = 33,
2028         MDS_GETATTR_NAME        = 34,
2029         MDS_CLOSE               = 35,
2030         MDS_REINT               = 36,
2031         MDS_READPAGE            = 37,
2032         MDS_CONNECT             = 38,
2033         MDS_DISCONNECT          = 39,
2034         MDS_GETSTATUS           = 40,
2035         MDS_STATFS              = 41,
2036         MDS_PIN                 = 42,
2037         MDS_UNPIN               = 43,
2038         MDS_SYNC                = 44,
2039         MDS_DONE_WRITING        = 45,
2040         MDS_SET_INFO            = 46,
2041         MDS_QUOTACHECK          = 47,
2042         MDS_QUOTACTL            = 48,
2043         MDS_GETXATTR            = 49,
2044         MDS_SETXATTR            = 50, /* obsolete, now it's MDS_REINT op */
2045         MDS_WRITEPAGE           = 51,
2046         MDS_IS_SUBDIR           = 52,
2047         MDS_GET_INFO            = 53,
2048         MDS_HSM_STATE_GET       = 54,
2049         MDS_HSM_STATE_SET       = 55,
2050         MDS_HSM_ACTION          = 56,
2051         MDS_HSM_PROGRESS        = 57,
2052         MDS_HSM_REQUEST         = 58,
2053         MDS_HSM_CT_REGISTER     = 59,
2054         MDS_HSM_CT_UNREGISTER   = 60,
2055         MDS_SWAP_LAYOUTS        = 61,
2056         MDS_LAST_OPC
2057 } mds_cmd_t;
2058
2059 #define MDS_FIRST_OPC    MDS_GETATTR
2060
2061
2062 /* opcodes for object update */
2063 typedef enum {
2064         UPDATE_OBJ      = 1000,
2065         UPDATE_LAST_OPC
2066 } update_cmd_t;
2067
2068 #define UPDATE_FIRST_OPC    UPDATE_OBJ
2069
2070 /*
2071  * Do not exceed 63
2072  */
2073
2074 typedef enum {
2075         REINT_SETATTR  = 1,
2076         REINT_CREATE   = 2,
2077         REINT_LINK     = 3,
2078         REINT_UNLINK   = 4,
2079         REINT_RENAME   = 5,
2080         REINT_OPEN     = 6,
2081         REINT_SETXATTR = 7,
2082         REINT_RMENTRY  = 8,
2083 //      REINT_WRITE    = 9,
2084         REINT_MAX
2085 } mds_reint_t, mdt_reint_t;
2086
2087 extern void lustre_swab_generic_32s (__u32 *val);
2088
2089 /* the disposition of the intent outlines what was executed */
2090 #define DISP_IT_EXECD        0x00000001
2091 #define DISP_LOOKUP_EXECD    0x00000002
2092 #define DISP_LOOKUP_NEG      0x00000004
2093 #define DISP_LOOKUP_POS      0x00000008
2094 #define DISP_OPEN_CREATE     0x00000010
2095 #define DISP_OPEN_OPEN       0x00000020
2096 #define DISP_ENQ_COMPLETE    0x00400000
2097 #define DISP_ENQ_OPEN_REF    0x00800000
2098 #define DISP_ENQ_CREATE_REF  0x01000000
2099 #define DISP_OPEN_LOCK       0x02000000
2100
2101 /* INODE LOCK PARTS */
2102 #define MDS_INODELOCK_LOOKUP 0x000001       /* dentry, mode, owner, group */
2103 #define MDS_INODELOCK_UPDATE 0x000002       /* size, links, timestamps */
2104 #define MDS_INODELOCK_OPEN   0x000004       /* For opened files */
2105 #define MDS_INODELOCK_LAYOUT 0x000008       /* for layout */
2106 #define MDS_INODELOCK_PERM   0x000010       /* for permission */
2107
2108 #define MDS_INODELOCK_MAXSHIFT 4
2109 /* This FULL lock is useful to take on unlink sort of operations */
2110 #define MDS_INODELOCK_FULL ((1<<(MDS_INODELOCK_MAXSHIFT+1))-1)
2111
2112 extern void lustre_swab_ll_fid (struct ll_fid *fid);
2113
2114 /* NOTE: until Lustre 1.8.7/2.1.1 the fid_ver() was packed into name[2],
2115  * but was moved into name[1] along with the OID to avoid consuming the
2116  * name[2,3] fields that need to be used for the quota id (also a FID). */
2117 enum {
2118         LUSTRE_RES_ID_SEQ_OFF = 0,
2119         LUSTRE_RES_ID_VER_OID_OFF = 1,
2120         LUSTRE_RES_ID_WAS_VER_OFF = 2, /* see note above */
2121         LUSTRE_RES_ID_QUOTA_SEQ_OFF = 2,
2122         LUSTRE_RES_ID_QUOTA_VER_OID_OFF = 3,
2123         LUSTRE_RES_ID_HSH_OFF = 3
2124 };
2125
2126 #define MDS_STATUS_CONN 1
2127 #define MDS_STATUS_LOV 2
2128
2129 /* mdt_thread_info.mti_flags. */
2130 enum md_op_flags {
2131         /* The flag indicates Size-on-MDS attributes are changed. */
2132         MF_SOM_CHANGE           = (1 << 0),
2133         /* Flags indicates an epoch opens or closes. */
2134         MF_EPOCH_OPEN           = (1 << 1),
2135         MF_EPOCH_CLOSE          = (1 << 2),
2136         MF_MDC_CANCEL_FID1      = (1 << 3),
2137         MF_MDC_CANCEL_FID2      = (1 << 4),
2138         MF_MDC_CANCEL_FID3      = (1 << 5),
2139         MF_MDC_CANCEL_FID4      = (1 << 6),
2140         /* There is a pending attribute update. */
2141         MF_SOM_AU               = (1 << 7),
2142         /* Cancel OST locks while getattr OST attributes. */
2143         MF_GETATTR_LOCK         = (1 << 8),
2144         MF_GET_MDT_IDX          = (1 << 9),
2145 };
2146
2147 #define MF_SOM_LOCAL_FLAGS (MF_SOM_CHANGE | MF_EPOCH_OPEN | MF_EPOCH_CLOSE)
2148
2149 #define LUSTRE_BFLAG_UNCOMMITTED_WRITES   0x1
2150
2151 /* these should be identical to their EXT4_*_FL counterparts, they are
2152  * redefined here only to avoid dragging in fs/ext4/ext4.h */
2153 #define LUSTRE_SYNC_FL         0x00000008 /* Synchronous updates */
2154 #define LUSTRE_IMMUTABLE_FL    0x00000010 /* Immutable file */
2155 #define LUSTRE_APPEND_FL       0x00000020 /* writes to file may only append */
2156 #define LUSTRE_NOATIME_FL      0x00000080 /* do not update atime */
2157 #define LUSTRE_DIRSYNC_FL      0x00010000 /* dirsync behaviour (dir only) */
2158
2159 #ifdef __KERNEL__
2160 /* Convert wire LUSTRE_*_FL to corresponding client local VFS S_* values
2161  * for the client inode i_flags.  The LUSTRE_*_FL are the Lustre wire
2162  * protocol equivalents of LDISKFS_*_FL values stored on disk, while
2163  * the S_* flags are kernel-internal values that change between kernel
2164  * versions.  These flags are set/cleared via FSFILT_IOC_{GET,SET}_FLAGS.
2165  * See b=16526 for a full history. */
2166 static inline int ll_ext_to_inode_flags(int flags)
2167 {
2168         return (((flags & LUSTRE_SYNC_FL)      ? S_SYNC      : 0) |
2169                 ((flags & LUSTRE_NOATIME_FL)   ? S_NOATIME   : 0) |
2170                 ((flags & LUSTRE_APPEND_FL)    ? S_APPEND    : 0) |
2171 #if defined(S_DIRSYNC)
2172                 ((flags & LUSTRE_DIRSYNC_FL)   ? S_DIRSYNC   : 0) |
2173 #endif
2174                 ((flags & LUSTRE_IMMUTABLE_FL) ? S_IMMUTABLE : 0));
2175 }
2176
2177 static inline int ll_inode_to_ext_flags(int iflags)
2178 {
2179         return (((iflags & S_SYNC)      ? LUSTRE_SYNC_FL      : 0) |
2180                 ((iflags & S_NOATIME)   ? LUSTRE_NOATIME_FL   : 0) |
2181                 ((iflags & S_APPEND)    ? LUSTRE_APPEND_FL    : 0) |
2182 #if defined(S_DIRSYNC)
2183                 ((iflags & S_DIRSYNC)   ? LUSTRE_DIRSYNC_FL   : 0) |
2184 #endif
2185                 ((iflags & S_IMMUTABLE) ? LUSTRE_IMMUTABLE_FL : 0));
2186 }
2187 #endif
2188
2189 struct mdt_body {
2190         struct lu_fid  fid1;
2191         struct lu_fid  fid2;
2192         struct lustre_handle handle;
2193         __u64          valid;
2194         __u64          size;   /* Offset, in the case of MDS_READPAGE */
2195        obd_time        mtime;
2196        obd_time        atime;
2197        obd_time        ctime;
2198         __u64          blocks; /* XID, in the case of MDS_READPAGE */
2199         __u64          ioepoch;
2200         __u64          unused1; /* was "ino" until 2.4.0 */
2201         __u32          fsuid;
2202         __u32          fsgid;
2203         __u32          capability;
2204         __u32          mode;
2205         __u32          uid;
2206         __u32          gid;
2207         __u32          flags; /* from vfs for pin/unpin, LUSTRE_BFLAG close */
2208         __u32          rdev;
2209         __u32          nlink; /* #bytes to read in the case of MDS_READPAGE */
2210         __u32          unused2; /* was "generation" until 2.4.0 */
2211         __u32          suppgid;
2212         __u32          eadatasize;
2213         __u32          aclsize;
2214         __u32          max_mdsize;
2215         __u32          max_cookiesize;
2216         __u32          uid_h; /* high 32-bits of uid, for FUID */
2217         __u32          gid_h; /* high 32-bits of gid, for FUID */
2218         __u32          padding_5; /* also fix lustre_swab_mdt_body */
2219         __u64          padding_6;
2220         __u64          padding_7;
2221         __u64          padding_8;
2222         __u64          padding_9;
2223         __u64          padding_10;
2224 }; /* 216 */
2225
2226 extern void lustre_swab_mdt_body (struct mdt_body *b);
2227
2228 struct mdt_ioepoch {
2229         struct lustre_handle handle;
2230         __u64  ioepoch;
2231         __u32  flags;
2232         __u32  padding;
2233 };
2234
2235 extern void lustre_swab_mdt_ioepoch (struct mdt_ioepoch *b);
2236
2237 /* permissions for md_perm.mp_perm */
2238 enum {
2239         CFS_SETUID_PERM = 0x01,
2240         CFS_SETGID_PERM = 0x02,
2241         CFS_SETGRP_PERM = 0x04,
2242         CFS_RMTACL_PERM = 0x08,
2243         CFS_RMTOWN_PERM = 0x10
2244 };
2245
2246 /* inode access permission for remote user, the inode info are omitted,
2247  * for client knows them. */
2248 struct mdt_remote_perm {
2249         __u32           rp_uid;
2250         __u32           rp_gid;
2251         __u32           rp_fsuid;
2252         __u32           rp_fsuid_h;
2253         __u32           rp_fsgid;
2254         __u32           rp_fsgid_h;
2255         __u32           rp_access_perm; /* MAY_READ/WRITE/EXEC */
2256         __u32           rp_padding;
2257 };
2258
2259 extern void lustre_swab_mdt_remote_perm(struct mdt_remote_perm *p);
2260
2261 struct mdt_rec_setattr {
2262         __u32           sa_opcode;
2263         __u32           sa_cap;
2264         __u32           sa_fsuid;
2265         __u32           sa_fsuid_h;
2266         __u32           sa_fsgid;
2267         __u32           sa_fsgid_h;
2268         __u32           sa_suppgid;
2269         __u32           sa_suppgid_h;
2270         __u32           sa_padding_1;
2271         __u32           sa_padding_1_h;
2272         struct lu_fid   sa_fid;
2273         __u64           sa_valid;
2274         __u32           sa_uid;
2275         __u32           sa_gid;
2276         __u64           sa_size;
2277         __u64           sa_blocks;
2278         obd_time        sa_mtime;
2279         obd_time        sa_atime;
2280         obd_time        sa_ctime;
2281         __u32           sa_attr_flags;
2282         __u32           sa_mode;
2283         __u32           sa_bias;      /* some operation flags */
2284         __u32           sa_padding_3;
2285         __u32           sa_padding_4;
2286         __u32           sa_padding_5;
2287 };
2288
2289 extern void lustre_swab_mdt_rec_setattr (struct mdt_rec_setattr *sa);
2290
2291 /*
2292  * Attribute flags used in mdt_rec_setattr::sa_valid.
2293  * The kernel's #defines for ATTR_* should not be used over the network
2294  * since the client and MDS may run different kernels (see bug 13828)
2295  * Therefore, we should only use MDS_ATTR_* attributes for sa_valid.
2296  */
2297 #define MDS_ATTR_MODE          0x1ULL /* = 1 */
2298 #define MDS_ATTR_UID           0x2ULL /* = 2 */
2299 #define MDS_ATTR_GID           0x4ULL /* = 4 */
2300 #define MDS_ATTR_SIZE          0x8ULL /* = 8 */
2301 #define MDS_ATTR_ATIME        0x10ULL /* = 16 */
2302 #define MDS_ATTR_MTIME        0x20ULL /* = 32 */
2303 #define MDS_ATTR_CTIME        0x40ULL /* = 64 */
2304 #define MDS_ATTR_ATIME_SET    0x80ULL /* = 128 */
2305 #define MDS_ATTR_MTIME_SET   0x100ULL /* = 256 */
2306 #define MDS_ATTR_FORCE       0x200ULL /* = 512, Not a change, but a change it */
2307 #define MDS_ATTR_ATTR_FLAG   0x400ULL /* = 1024 */
2308 #define MDS_ATTR_KILL_SUID   0x800ULL /* = 2048 */
2309 #define MDS_ATTR_KILL_SGID  0x1000ULL /* = 4096 */
2310 #define MDS_ATTR_CTIME_SET  0x2000ULL /* = 8192 */
2311 #define MDS_ATTR_FROM_OPEN  0x4000ULL /* = 16384, called from open path, ie O_TRUNC */
2312 #define MDS_ATTR_BLOCKS     0x8000ULL /* = 32768 */
2313
2314 #ifndef FMODE_READ
2315 #define FMODE_READ               00000001
2316 #define FMODE_WRITE              00000002
2317 #endif
2318
2319 #define MDS_FMODE_CLOSED         00000000
2320 #define MDS_FMODE_EXEC           00000004
2321 /* IO Epoch is opened on a closed file. */
2322 #define MDS_FMODE_EPOCH          01000000
2323 /* IO Epoch is opened on a file truncate. */
2324 #define MDS_FMODE_TRUNC          02000000
2325 /* Size-on-MDS Attribute Update is pending. */
2326 #define MDS_FMODE_SOM            04000000
2327
2328 #define MDS_OPEN_CREATED         00000010
2329 #define MDS_OPEN_CROSS           00000020
2330
2331 #define MDS_OPEN_CREAT           00000100
2332 #define MDS_OPEN_EXCL            00000200
2333 #define MDS_OPEN_TRUNC           00001000
2334 #define MDS_OPEN_APPEND          00002000
2335 #define MDS_OPEN_SYNC            00010000
2336 #define MDS_OPEN_DIRECTORY       00200000
2337
2338 #define MDS_OPEN_BY_FID         040000000 /* open_by_fid for known object */
2339 #define MDS_OPEN_DELAY_CREATE  0100000000 /* delay initial object create */
2340 #define MDS_OPEN_OWNEROVERRIDE 0200000000 /* NFSD rw-reopen ro file for owner */
2341 #define MDS_OPEN_JOIN_FILE     0400000000 /* open for join file.
2342                                            * We do not support JOIN FILE
2343                                            * anymore, reserve this flags
2344                                            * just for preventing such bit
2345                                            * to be reused. */
2346
2347 #define MDS_OPEN_LOCK         04000000000 /* This open requires open lock */
2348 #define MDS_OPEN_HAS_EA      010000000000 /* specify object create pattern */
2349 #define MDS_OPEN_HAS_OBJS    020000000000 /* Just set the EA the obj exist */
2350 #define MDS_OPEN_NORESTORE  0100000000000ULL /* Do not restore file at open */
2351 #define MDS_OPEN_NEWSTRIPE  0200000000000ULL /* New stripe needed (restripe or
2352                                               * hsm restore) */
2353 #define MDS_OPEN_VOLATILE   0400000000000ULL /* File is volatile = created
2354                                                 unlinked */
2355
2356 /* permission for create non-directory file */
2357 #define MAY_CREATE      (1 << 7)
2358 /* permission for create directory file */
2359 #define MAY_LINK        (1 << 8)
2360 /* permission for delete from the directory */
2361 #define MAY_UNLINK      (1 << 9)
2362 /* source's permission for rename */
2363 #define MAY_RENAME_SRC  (1 << 10)
2364 /* target's permission for rename */
2365 #define MAY_RENAME_TAR  (1 << 11)
2366 /* part (parent's) VTX permission check */
2367 #define MAY_VTX_PART    (1 << 12)
2368 /* full VTX permission check */
2369 #define MAY_VTX_FULL    (1 << 13)
2370 /* lfs rgetfacl permission check */
2371 #define MAY_RGETFACL    (1 << 14)
2372
2373 enum {
2374         MDS_CHECK_SPLIT         = 1 << 0,
2375         MDS_CROSS_REF           = 1 << 1,
2376         MDS_VTX_BYPASS          = 1 << 2,
2377         MDS_PERM_BYPASS         = 1 << 3,
2378         MDS_SOM                 = 1 << 4,
2379         MDS_QUOTA_IGNORE        = 1 << 5,
2380         MDS_CLOSE_CLEANUP       = 1 << 6,
2381         MDS_KEEP_ORPHAN         = 1 << 7,
2382         MDS_RECOV_OPEN          = 1 << 8,
2383         MDS_DATA_MODIFIED       = 1 << 9,
2384         MDS_CREATE_VOLATILE     = 1 << 10,
2385         MDS_OWNEROVERRIDE       = 1 << 11,
2386 };
2387
2388 /* instance of mdt_reint_rec */
2389 struct mdt_rec_create {
2390         __u32           cr_opcode;
2391         __u32           cr_cap;
2392         __u32           cr_fsuid;
2393         __u32           cr_fsuid_h;
2394         __u32           cr_fsgid;
2395         __u32           cr_fsgid_h;
2396         __u32           cr_suppgid1;
2397         __u32           cr_suppgid1_h;
2398         __u32           cr_suppgid2;
2399         __u32           cr_suppgid2_h;
2400         struct lu_fid   cr_fid1;
2401         struct lu_fid   cr_fid2;
2402         struct lustre_handle cr_old_handle; /* handle in case of open replay */
2403         obd_time        cr_time;
2404         __u64           cr_rdev;
2405         __u64           cr_ioepoch;
2406         __u64           cr_padding_1;   /* rr_blocks */
2407         __u32           cr_mode;
2408         __u32           cr_bias;
2409         /* use of helpers set/get_mrc_cr_flags() is needed to access
2410          * 64 bits cr_flags [cr_flags_l, cr_flags_h], this is done to
2411          * extend cr_flags size without breaking 1.8 compat */
2412         __u32           cr_flags_l;     /* for use with open, low  32 bits  */
2413         __u32           cr_flags_h;     /* for use with open, high 32 bits */
2414         __u32           cr_umask;       /* umask for create */
2415         __u32           cr_padding_4;   /* rr_padding_4 */
2416 };
2417
2418 static inline void set_mrc_cr_flags(struct mdt_rec_create *mrc, __u64 flags)
2419 {
2420         mrc->cr_flags_l = (__u32)(flags & 0xFFFFFFFFUll);
2421         mrc->cr_flags_h = (__u32)(flags >> 32);
2422 }
2423
2424 static inline __u64 get_mrc_cr_flags(struct mdt_rec_create *mrc)
2425 {
2426         return ((__u64)(mrc->cr_flags_l) | ((__u64)mrc->cr_flags_h << 32));
2427 }
2428
2429 /* instance of mdt_reint_rec */
2430 struct mdt_rec_link {
2431         __u32           lk_opcode;
2432         __u32           lk_cap;
2433         __u32           lk_fsuid;
2434         __u32           lk_fsuid_h;
2435         __u32           lk_fsgid;
2436         __u32           lk_fsgid_h;
2437         __u32           lk_suppgid1;
2438         __u32           lk_suppgid1_h;
2439         __u32           lk_suppgid2;
2440         __u32           lk_suppgid2_h;
2441         struct lu_fid   lk_fid1;
2442         struct lu_fid   lk_fid2;
2443         obd_time        lk_time;
2444         __u64           lk_padding_1;   /* rr_atime */
2445         __u64           lk_padding_2;   /* rr_ctime */
2446         __u64           lk_padding_3;   /* rr_size */
2447         __u64           lk_padding_4;   /* rr_blocks */
2448         __u32           lk_bias;
2449         __u32           lk_padding_5;   /* rr_mode */
2450         __u32           lk_padding_6;   /* rr_flags */
2451         __u32           lk_padding_7;   /* rr_padding_2 */
2452         __u32           lk_padding_8;   /* rr_padding_3 */
2453         __u32           lk_padding_9;   /* rr_padding_4 */
2454 };
2455
2456 /* instance of mdt_reint_rec */
2457 struct mdt_rec_unlink {
2458         __u32           ul_opcode;
2459         __u32           ul_cap;
2460         __u32           ul_fsuid;
2461         __u32           ul_fsuid_h;
2462         __u32           ul_fsgid;
2463         __u32           ul_fsgid_h;
2464         __u32           ul_suppgid1;
2465         __u32           ul_suppgid1_h;
2466         __u32           ul_suppgid2;
2467         __u32           ul_suppgid2_h;
2468         struct lu_fid   ul_fid1;
2469         struct lu_fid   ul_fid2;
2470         obd_time        ul_time;
2471         __u64           ul_padding_2;   /* rr_atime */
2472         __u64           ul_padding_3;   /* rr_ctime */
2473         __u64           ul_padding_4;   /* rr_size */
2474         __u64           ul_padding_5;   /* rr_blocks */
2475         __u32           ul_bias;
2476         __u32           ul_mode;
2477         __u32           ul_padding_6;   /* rr_flags */
2478         __u32           ul_padding_7;   /* rr_padding_2 */
2479         __u32           ul_padding_8;   /* rr_padding_3 */
2480         __u32           ul_padding_9;   /* rr_padding_4 */
2481 };
2482
2483 /* instance of mdt_reint_rec */
2484 struct mdt_rec_rename {
2485         __u32           rn_opcode;
2486         __u32           rn_cap;
2487         __u32           rn_fsuid;
2488         __u32           rn_fsuid_h;
2489         __u32           rn_fsgid;
2490         __u32           rn_fsgid_h;
2491         __u32           rn_suppgid1;
2492         __u32           rn_suppgid1_h;
2493         __u32           rn_suppgid2;
2494         __u32           rn_suppgid2_h;
2495         struct lu_fid   rn_fid1;
2496         struct lu_fid   rn_fid2;
2497         obd_time        rn_time;
2498         __u64           rn_padding_1;   /* rr_atime */
2499         __u64           rn_padding_2;   /* rr_ctime */
2500         __u64           rn_padding_3;   /* rr_size */
2501         __u64           rn_padding_4;   /* rr_blocks */
2502         __u32           rn_bias;        /* some operation flags */
2503         __u32           rn_mode;        /* cross-ref rename has mode */
2504         __u32           rn_padding_5;   /* rr_flags */
2505         __u32           rn_padding_6;   /* rr_padding_2 */
2506         __u32           rn_padding_7;   /* rr_padding_3 */
2507         __u32           rn_padding_8;   /* rr_padding_4 */
2508 };
2509
2510 /* instance of mdt_reint_rec */
2511 struct mdt_rec_setxattr {
2512         __u32           sx_opcode;
2513         __u32           sx_cap;
2514         __u32           sx_fsuid;
2515         __u32           sx_fsuid_h;
2516         __u32           sx_fsgid;
2517         __u32           sx_fsgid_h;
2518         __u32           sx_suppgid1;
2519         __u32           sx_suppgid1_h;
2520         __u32           sx_suppgid2;
2521         __u32           sx_suppgid2_h;
2522         struct lu_fid   sx_fid;
2523         __u64           sx_padding_1;   /* These three are rr_fid2 */
2524         __u32           sx_padding_2;
2525         __u32           sx_padding_3;
2526         __u64           sx_valid;
2527         obd_time        sx_time;
2528         __u64           sx_padding_5;   /* rr_ctime */
2529         __u64           sx_padding_6;   /* rr_size */
2530         __u64           sx_padding_7;   /* rr_blocks */
2531         __u32           sx_size;
2532         __u32           sx_flags;
2533         __u32           sx_padding_8;   /* rr_flags */
2534         __u32           sx_padding_9;   /* rr_padding_2 */
2535         __u32           sx_padding_10;  /* rr_padding_3 */
2536         __u32           sx_padding_11;  /* rr_padding_4 */
2537 };
2538
2539 /*
2540  * mdt_rec_reint is the template for all mdt_reint_xxx structures.
2541  * Do NOT change the size of various members, otherwise the value
2542  * will be broken in lustre_swab_mdt_rec_reint().
2543  *
2544  * If you add new members in other mdt_reint_xxx structres and need to use the
2545  * rr_padding_x fields, then update lustre_swab_mdt_rec_reint() also.
2546  */
2547 struct mdt_rec_reint {
2548         __u32           rr_opcode;
2549         __u32           rr_cap;
2550         __u32           rr_fsuid;
2551         __u32           rr_fsuid_h;
2552         __u32           rr_fsgid;
2553         __u32           rr_fsgid_h;
2554         __u32           rr_suppgid1;
2555         __u32           rr_suppgid1_h;
2556         __u32           rr_suppgid2;
2557         __u32           rr_suppgid2_h;
2558         struct lu_fid   rr_fid1;
2559         struct lu_fid   rr_fid2;
2560         obd_time        rr_mtime;
2561         obd_time        rr_atime;
2562         obd_time        rr_ctime;
2563         __u64           rr_size;
2564         __u64           rr_blocks;
2565         __u32           rr_bias;
2566         __u32           rr_mode;
2567         __u32           rr_flags;
2568         __u32           rr_flags_h;
2569         __u32           rr_umask;
2570         __u32           rr_padding_4; /* also fix lustre_swab_mdt_rec_reint */
2571 };
2572
2573 extern void lustre_swab_mdt_rec_reint(struct mdt_rec_reint *rr);
2574
2575 struct lmv_desc {
2576         __u32 ld_tgt_count;                /* how many MDS's */
2577         __u32 ld_active_tgt_count;         /* how many active */
2578         __u32 ld_default_stripe_count;     /* how many objects are used */
2579         __u32 ld_pattern;                  /* default MEA_MAGIC_* */
2580         __u64 ld_default_hash_size;
2581         __u64 ld_padding_1;                /* also fix lustre_swab_lmv_desc */
2582         __u32 ld_padding_2;                /* also fix lustre_swab_lmv_desc */
2583         __u32 ld_qos_maxage;               /* in second */
2584         __u32 ld_padding_3;                /* also fix lustre_swab_lmv_desc */
2585         __u32 ld_padding_4;                /* also fix lustre_swab_lmv_desc */
2586         struct obd_uuid ld_uuid;
2587 };
2588
2589 extern void lustre_swab_lmv_desc (struct lmv_desc *ld);
2590
2591 /* TODO: lmv_stripe_md should contain mds capabilities for all slave fids */
2592 struct lmv_stripe_md {
2593         __u32         mea_magic;
2594         __u32         mea_count;
2595         __u32         mea_master;
2596         __u32         mea_padding;
2597         char          mea_pool_name[LOV_MAXPOOLNAME];
2598         struct lu_fid mea_ids[0];
2599 };
2600
2601 extern void lustre_swab_lmv_stripe_md(struct lmv_stripe_md *mea);
2602
2603 /* lmv structures */
2604 #define MEA_MAGIC_LAST_CHAR      0xb2221ca1
2605 #define MEA_MAGIC_ALL_CHARS      0xb222a11c
2606 #define MEA_MAGIC_HASH_SEGMENT   0xb222a11b
2607
2608 #define MAX_HASH_SIZE_32         0x7fffffffUL
2609 #define MAX_HASH_SIZE            0x7fffffffffffffffULL
2610 #define MAX_HASH_HIGHEST_BIT     0x1000000000000000ULL
2611
2612 enum fld_rpc_opc {
2613         FLD_QUERY                       = 900,
2614         FLD_LAST_OPC,
2615         FLD_FIRST_OPC                   = FLD_QUERY
2616 };
2617
2618 enum seq_rpc_opc {
2619         SEQ_QUERY                       = 700,
2620         SEQ_LAST_OPC,
2621         SEQ_FIRST_OPC                   = SEQ_QUERY
2622 };
2623
2624 enum seq_op {
2625         SEQ_ALLOC_SUPER = 0,
2626         SEQ_ALLOC_META = 1
2627 };
2628
2629 /*
2630  *  LOV data structures
2631  */
2632
2633 #define LOV_MAX_UUID_BUFFER_SIZE  8192
2634 /* The size of the buffer the lov/mdc reserves for the
2635  * array of UUIDs returned by the MDS.  With the current
2636  * protocol, this will limit the max number of OSTs per LOV */
2637
2638 #define LOV_DESC_MAGIC 0xB0CCDE5C
2639
2640 /* LOV settings descriptor (should only contain static info) */
2641 struct lov_desc {
2642         __u32 ld_tgt_count;                /* how many OBD's */
2643         __u32 ld_active_tgt_count;         /* how many active */
2644         __u32 ld_default_stripe_count;     /* how many objects are used */
2645         __u32 ld_pattern;                  /* default PATTERN_RAID0 */
2646         __u64 ld_default_stripe_size;      /* in bytes */
2647         __u64 ld_default_stripe_offset;    /* in bytes */
2648         __u32 ld_padding_0;                /* unused */
2649         __u32 ld_qos_maxage;               /* in second */
2650         __u32 ld_padding_1;                /* also fix lustre_swab_lov_desc */
2651         __u32 ld_padding_2;                /* also fix lustre_swab_lov_desc */
2652         struct obd_uuid ld_uuid;
2653 };
2654
2655 #define ld_magic ld_active_tgt_count       /* for swabbing from llogs */
2656
2657 extern void lustre_swab_lov_desc (struct lov_desc *ld);
2658
2659 /*
2660  *   LDLM requests:
2661  */
2662 /* opcodes -- MUST be distinct from OST/MDS opcodes */
2663 typedef enum {
2664         LDLM_ENQUEUE     = 101,
2665         LDLM_CONVERT     = 102,
2666         LDLM_CANCEL      = 103,
2667         LDLM_BL_CALLBACK = 104,
2668         LDLM_CP_CALLBACK = 105,
2669         LDLM_GL_CALLBACK = 106,
2670         LDLM_SET_INFO    = 107,
2671         LDLM_LAST_OPC
2672 } ldlm_cmd_t;
2673 #define LDLM_FIRST_OPC LDLM_ENQUEUE
2674
2675 #define RES_NAME_SIZE 4
2676 struct ldlm_res_id {
2677         __u64 name[RES_NAME_SIZE];
2678 };
2679
2680 extern void lustre_swab_ldlm_res_id (struct ldlm_res_id *id);
2681
2682 static inline int ldlm_res_eq(const struct ldlm_res_id *res0,
2683                               const struct ldlm_res_id *res1)
2684 {
2685         return !memcmp(res0, res1, sizeof(*res0));
2686 }
2687
2688 /* lock types */
2689 typedef enum {
2690         LCK_MINMODE = 0,
2691         LCK_EX      = 1,
2692         LCK_PW      = 2,
2693         LCK_PR      = 4,
2694         LCK_CW      = 8,
2695         LCK_CR      = 16,
2696         LCK_NL      = 32,
2697         LCK_GROUP   = 64,
2698         LCK_COS     = 128,
2699         LCK_MAXMODE
2700 } ldlm_mode_t;
2701
2702 #define LCK_MODE_NUM    8
2703
2704 typedef enum {
2705         LDLM_PLAIN     = 10,
2706         LDLM_EXTENT    = 11,
2707         LDLM_FLOCK     = 12,
2708         LDLM_IBITS     = 13,
2709         LDLM_MAX_TYPE
2710 } ldlm_type_t;
2711
2712 #define LDLM_MIN_TYPE LDLM_PLAIN
2713
2714 struct ldlm_extent {
2715         __u64 start;
2716         __u64 end;
2717         __u64 gid;
2718 };
2719
2720 static inline int ldlm_extent_overlap(struct ldlm_extent *ex1,
2721                                       struct ldlm_extent *ex2)
2722 {
2723         return (ex1->start <= ex2->end) && (ex2->start <= ex1->end);
2724 }
2725
2726 /* check if @ex1 contains @ex2 */
2727 static inline int ldlm_extent_contain(struct ldlm_extent *ex1,
2728                                       struct ldlm_extent *ex2)
2729 {
2730         return (ex1->start <= ex2->start) && (ex1->end >= ex2->end);
2731 }
2732
2733 struct ldlm_inodebits {
2734         __u64 bits;
2735 };
2736
2737 struct ldlm_flock_wire {
2738         __u64 lfw_start;
2739         __u64 lfw_end;
2740         __u64 lfw_owner;
2741         __u32 lfw_padding;
2742         __u32 lfw_pid;
2743 };
2744
2745 /* it's important that the fields of the ldlm_extent structure match
2746  * the first fields of the ldlm_flock structure because there is only
2747  * one ldlm_swab routine to process the ldlm_policy_data_t union. if
2748  * this ever changes we will need to swab the union differently based
2749  * on the resource type. */
2750
2751 typedef union {
2752         struct ldlm_extent l_extent;
2753         struct ldlm_flock_wire l_flock;
2754         struct ldlm_inodebits l_inodebits;
2755 } ldlm_wire_policy_data_t;
2756
2757 extern void lustre_swab_ldlm_policy_data (ldlm_wire_policy_data_t *d);
2758
2759 union ldlm_gl_desc {
2760         struct ldlm_gl_lquota_desc      lquota_desc;
2761 };
2762
2763 extern void lustre_swab_gl_desc(union ldlm_gl_desc *);
2764
2765 struct ldlm_intent {
2766         __u64 opc;
2767 };
2768
2769 extern void lustre_swab_ldlm_intent (struct ldlm_intent *i);
2770
2771 struct ldlm_resource_desc {
2772         ldlm_type_t lr_type;
2773         __u32 lr_padding;       /* also fix lustre_swab_ldlm_resource_desc */
2774         struct ldlm_res_id lr_name;
2775 };
2776
2777 extern void lustre_swab_ldlm_resource_desc (struct ldlm_resource_desc *r);
2778
2779 struct ldlm_lock_desc {
2780         struct ldlm_resource_desc l_resource;
2781         ldlm_mode_t l_req_mode;
2782         ldlm_mode_t l_granted_mode;
2783         ldlm_wire_policy_data_t l_policy_data;
2784 };
2785
2786 extern void lustre_swab_ldlm_lock_desc (struct ldlm_lock_desc *l);
2787
2788 #define LDLM_LOCKREQ_HANDLES 2
2789 #define LDLM_ENQUEUE_CANCEL_OFF 1
2790
2791 struct ldlm_request {
2792         __u32 lock_flags;
2793         __u32 lock_count;
2794         struct ldlm_lock_desc lock_desc;
2795         struct lustre_handle lock_handle[LDLM_LOCKREQ_HANDLES];
2796 };
2797
2798 extern void lustre_swab_ldlm_request (struct ldlm_request *rq);
2799
2800 /* If LDLM_ENQUEUE, 1 slot is already occupied, 1 is available.
2801  * Otherwise, 2 are available. */
2802 #define ldlm_request_bufsize(count,type)                                \
2803 ({                                                                      \
2804         int _avail = LDLM_LOCKREQ_HANDLES;                              \
2805         _avail -= (type == LDLM_ENQUEUE ? LDLM_ENQUEUE_CANCEL_OFF : 0); \
2806         sizeof(struct ldlm_request) +                                   \
2807         (count > _avail ? count - _avail : 0) *                         \
2808         sizeof(struct lustre_handle);                                   \
2809 })
2810
2811 struct ldlm_reply {
2812         __u32 lock_flags;
2813         __u32 lock_padding;     /* also fix lustre_swab_ldlm_reply */
2814         struct ldlm_lock_desc lock_desc;
2815         struct lustre_handle lock_handle;
2816         __u64  lock_policy_res1;
2817         __u64  lock_policy_res2;
2818 };
2819
2820 extern void lustre_swab_ldlm_reply (struct ldlm_reply *r);
2821
2822 #define ldlm_flags_to_wire(flags)    ((__u32)(flags))
2823 #define ldlm_flags_from_wire(flags)  ((__u64)(flags))
2824
2825 /*
2826  * Opcodes for mountconf (mgs and mgc)
2827  */
2828 typedef enum {
2829         MGS_CONNECT = 250,
2830         MGS_DISCONNECT,
2831         MGS_EXCEPTION,         /* node died, etc. */
2832         MGS_TARGET_REG,        /* whenever target starts up */
2833         MGS_TARGET_DEL,
2834         MGS_SET_INFO,
2835         MGS_CONFIG_READ,
2836         MGS_LAST_OPC
2837 } mgs_cmd_t;
2838 #define MGS_FIRST_OPC MGS_CONNECT
2839
2840 #define MGS_PARAM_MAXLEN 1024
2841 #define KEY_SET_INFO "set_info"
2842
2843 struct mgs_send_param {
2844         char             mgs_param[MGS_PARAM_MAXLEN];
2845 };
2846
2847 /* We pass this info to the MGS so it can write config logs */
2848 #define MTI_NAME_MAXLEN  64
2849 #define MTI_PARAM_MAXLEN 4096
2850 #define MTI_NIDS_MAX     32
2851 struct mgs_target_info {
2852         __u32            mti_lustre_ver;
2853         __u32            mti_stripe_index;
2854         __u32            mti_config_ver;
2855         __u32            mti_flags;
2856         __u32            mti_nid_count;
2857         __u32            mti_instance; /* Running instance of target */
2858         char             mti_fsname[MTI_NAME_MAXLEN];
2859         char             mti_svname[MTI_NAME_MAXLEN];
2860         char             mti_uuid[sizeof(struct obd_uuid)];
2861         __u64            mti_nids[MTI_NIDS_MAX];     /* host nids (lnet_nid_t)*/
2862         char             mti_params[MTI_PARAM_MAXLEN];
2863 };
2864 extern void lustre_swab_mgs_target_info(struct mgs_target_info *oinfo);
2865
2866 struct mgs_nidtbl_entry {
2867         __u64           mne_version;    /* table version of this entry */
2868         __u32           mne_instance;   /* target instance # */
2869         __u32           mne_index;      /* target index */
2870         __u32           mne_length;     /* length of this entry - by bytes */
2871         __u8            mne_type;       /* target type LDD_F_SV_TYPE_OST/MDT */
2872         __u8            mne_nid_type;   /* type of nid(mbz). for ipv6. */
2873         __u8            mne_nid_size;   /* size of each NID, by bytes */
2874         __u8            mne_nid_count;  /* # of NIDs in buffer */
2875         union {
2876                 lnet_nid_t nids[0];     /* variable size buffer for NIDs. */
2877         } u;
2878 };
2879 extern void lustre_swab_mgs_nidtbl_entry(struct mgs_nidtbl_entry *oinfo);
2880
2881 struct mgs_config_body {
2882         char     mcb_name[MTI_NAME_MAXLEN]; /* logname */
2883         __u64    mcb_offset;    /* next index of config log to request */
2884         __u16    mcb_type;      /* type of log: CONFIG_T_[CONFIG|RECOVER] */
2885         __u8     mcb_reserved;
2886         __u8     mcb_bits;      /* bits unit size of config log */
2887         __u32    mcb_units;     /* # of units for bulk transfer */
2888 };
2889 extern void lustre_swab_mgs_config_body(struct mgs_config_body *body);
2890
2891 struct mgs_config_res {
2892         __u64    mcr_offset;    /* index of last config log */
2893         __u64    mcr_size;      /* size of the log */
2894 };
2895 extern void lustre_swab_mgs_config_res(struct mgs_config_res *body);
2896
2897 /* Config marker flags (in config log) */
2898 #define CM_START       0x01
2899 #define CM_END         0x02
2900 #define CM_SKIP        0x04
2901 #define CM_UPGRADE146  0x08
2902 #define CM_EXCLUDE     0x10
2903 #define CM_START_SKIP (CM_START | CM_SKIP)
2904
2905 struct cfg_marker {
2906         __u32             cm_step;       /* aka config version */
2907         __u32             cm_flags;
2908         __u32             cm_vers;       /* lustre release version number */
2909         __u32             cm_padding;    /* 64 bit align */
2910         obd_time          cm_createtime; /*when this record was first created */
2911         obd_time          cm_canceltime; /*when this record is no longer valid*/
2912         char              cm_tgtname[MTI_NAME_MAXLEN];
2913         char              cm_comment[MTI_NAME_MAXLEN];
2914 };
2915
2916 extern void lustre_swab_cfg_marker(struct cfg_marker *marker,
2917                                    int swab, int size);
2918
2919 /*
2920  * Opcodes for multiple servers.
2921  */
2922
2923 typedef enum {
2924         OBD_PING = 400,
2925         OBD_LOG_CANCEL,
2926         OBD_QC_CALLBACK,
2927         OBD_IDX_READ,
2928         OBD_LAST_OPC
2929 } obd_cmd_t;
2930 #define OBD_FIRST_OPC OBD_PING
2931
2932 /* catalog of log objects */
2933
2934 /** Identifier for a single log object */
2935 struct llog_logid {
2936         struct ost_id           lgl_oi;
2937         __u32                   lgl_ogen;
2938 } __attribute__((packed));
2939
2940 /** Records written to the CATALOGS list */
2941 #define CATLIST "CATALOGS"
2942 struct llog_catid {
2943         struct llog_logid       lci_logid;
2944         __u32                   lci_padding1;
2945         __u32                   lci_padding2;
2946         __u32                   lci_padding3;
2947 } __attribute__((packed));
2948
2949 /* Log data record types - there is no specific reason that these need to
2950  * be related to the RPC opcodes, but no reason not to (may be handy later?)
2951  */
2952 #define LLOG_OP_MAGIC 0x10600000
2953 #define LLOG_OP_MASK  0xfff00000
2954
2955 typedef enum {
2956         LLOG_PAD_MAGIC          = LLOG_OP_MAGIC | 0x00000,
2957         OST_SZ_REC              = LLOG_OP_MAGIC | 0x00f00,
2958         /* OST_RAID1_REC        = LLOG_OP_MAGIC | 0x01000, never used */
2959         MDS_UNLINK_REC          = LLOG_OP_MAGIC | 0x10000 | (MDS_REINT << 8) |
2960                                   REINT_UNLINK, /* obsolete after 2.5.0 */
2961         MDS_UNLINK64_REC        = LLOG_OP_MAGIC | 0x90000 | (MDS_REINT << 8) |
2962                                   REINT_UNLINK,
2963         /* MDS_SETATTR_REC      = LLOG_OP_MAGIC | 0x12401, obsolete 1.8.0 */
2964         MDS_SETATTR64_REC       = LLOG_OP_MAGIC | 0x90000 | (MDS_REINT << 8) |
2965                                   REINT_SETATTR,
2966         OBD_CFG_REC             = LLOG_OP_MAGIC | 0x20000,
2967         /* PTL_CFG_REC          = LLOG_OP_MAGIC | 0x30000, obsolete 1.4.0 */
2968         LLOG_GEN_REC            = LLOG_OP_MAGIC | 0x40000,
2969         /* LLOG_JOIN_REC        = LLOG_OP_MAGIC | 0x50000, obsolete  1.8.0 */
2970         CHANGELOG_REC           = LLOG_OP_MAGIC | 0x60000,
2971         CHANGELOG_USER_REC      = LLOG_OP_MAGIC | 0x70000,
2972         LLOG_HDR_MAGIC          = LLOG_OP_MAGIC | 0x45539,
2973         LLOG_LOGID_MAGIC        = LLOG_OP_MAGIC | 0x4553b,
2974 } llog_op_type;
2975
2976 #define LLOG_REC_HDR_NEEDS_SWABBING(r) \
2977         (((r)->lrh_type & __swab32(LLOG_OP_MASK)) == __swab32(LLOG_OP_MAGIC))
2978
2979 /** Log record header - stored in little endian order.
2980  * Each record must start with this struct, end with a llog_rec_tail,
2981  * and be a multiple of 256 bits in size.
2982  */
2983 struct llog_rec_hdr {
2984         __u32   lrh_len;
2985         __u32   lrh_index;
2986         __u32   lrh_type;
2987         __u32   lrh_id;
2988 };
2989
2990 struct llog_rec_tail {
2991         __u32   lrt_len;
2992         __u32   lrt_index;
2993 };
2994
2995 /* Where data follow just after header */
2996 #define REC_DATA(ptr)                                           \
2997         ((void *)((char *)ptr + sizeof(struct llog_rec_hdr)))
2998
2999 #define REC_DATA_LEN(rec)                                       \
3000         (rec->lrh_len - sizeof(struct llog_rec_hdr) -           \
3001          sizeof(struct llog_rec_tail))
3002
3003 struct llog_logid_rec {
3004         struct llog_rec_hdr     lid_hdr;
3005         struct llog_logid       lid_id;
3006         __u32                   lid_padding1;
3007         __u64                   lid_padding2;
3008         __u64                   lid_padding3;
3009         struct llog_rec_tail    lid_tail;
3010 } __attribute__((packed));
3011
3012 struct llog_unlink_rec {
3013         struct llog_rec_hdr     lur_hdr;
3014         obd_id                  lur_oid;
3015         obd_count               lur_oseq;
3016         obd_count               lur_count;
3017         struct llog_rec_tail    lur_tail;
3018 } __attribute__((packed));
3019
3020 struct llog_unlink64_rec {
3021         struct llog_rec_hdr     lur_hdr;
3022         struct lu_fid           lur_fid;
3023         obd_count               lur_count; /* to destroy the lost precreated */
3024         __u32                   lur_padding1;
3025         __u64                   lur_padding2;
3026         __u64                   lur_padding3;
3027         struct llog_rec_tail    lur_tail;
3028 } __attribute__((packed));
3029
3030 struct llog_setattr64_rec {
3031         struct llog_rec_hdr     lsr_hdr;
3032         struct ost_id           lsr_oi;
3033         __u32                   lsr_uid;
3034         __u32                   lsr_uid_h;
3035         __u32                   lsr_gid;
3036         __u32                   lsr_gid_h;
3037         __u64                   lsr_padding;
3038         struct llog_rec_tail    lsr_tail;
3039 } __attribute__((packed));
3040
3041 struct llog_size_change_rec {
3042         struct llog_rec_hdr     lsc_hdr;
3043         struct ll_fid           lsc_fid;
3044         __u32                   lsc_ioepoch;
3045         __u32                   lsc_padding1;
3046         __u64                   lsc_padding2;
3047         __u64                   lsc_padding3;
3048         struct llog_rec_tail    lsc_tail;
3049 } __attribute__((packed));
3050
3051 #define CHANGELOG_MAGIC 0xca103000
3052
3053 /** \a changelog_rec_type's that can't be masked */
3054 #define CHANGELOG_MINMASK (1 << CL_MARK)
3055 /** bits covering all \a changelog_rec_type's */
3056 #define CHANGELOG_ALLMASK 0XFFFFFFFF
3057 /** default \a changelog_rec_type mask */
3058 #define CHANGELOG_DEFMASK CHANGELOG_ALLMASK & ~(1 << CL_ATIME | 1 << CL_CLOSE)
3059
3060 /* changelog llog name, needed by client replicators */
3061 #define CHANGELOG_CATALOG "changelog_catalog"
3062
3063 struct changelog_setinfo {
3064         __u64 cs_recno;
3065         __u32 cs_id;
3066 } __attribute__((packed));
3067
3068 /** changelog record */
3069 struct llog_changelog_rec {
3070         struct llog_rec_hdr  cr_hdr;
3071         struct changelog_rec cr;
3072         struct llog_rec_tail cr_tail; /**< for_sizezof_only */
3073 } __attribute__((packed));
3074
3075 struct llog_changelog_ext_rec {
3076         struct llog_rec_hdr      cr_hdr;
3077         struct changelog_ext_rec cr;
3078         struct llog_rec_tail     cr_tail; /**< for_sizezof_only */
3079 } __attribute__((packed));
3080
3081 #define CHANGELOG_USER_PREFIX "cl"
3082
3083 struct llog_changelog_user_rec {
3084         struct llog_rec_hdr   cur_hdr;
3085         __u32                 cur_id;
3086         __u32                 cur_padding;
3087         __u64                 cur_endrec;
3088         struct llog_rec_tail  cur_tail;
3089 } __attribute__((packed));
3090
3091 /* Old llog gen for compatibility */
3092 struct llog_gen {
3093         __u64 mnt_cnt;
3094         __u64 conn_cnt;
3095 } __attribute__((packed));
3096
3097 struct llog_gen_rec {
3098         struct llog_rec_hdr     lgr_hdr;
3099         struct llog_gen         lgr_gen;
3100         __u64                   padding1;
3101         __u64                   padding2;
3102         __u64                   padding3;
3103         struct llog_rec_tail    lgr_tail;
3104 };
3105
3106 /* On-disk header structure of each log object, stored in little endian order */
3107 #define LLOG_CHUNK_SIZE         8192
3108 #define LLOG_HEADER_SIZE        (96)
3109 #define LLOG_BITMAP_BYTES       (LLOG_CHUNK_SIZE - LLOG_HEADER_SIZE)
3110
3111 #define LLOG_MIN_REC_SIZE       (24) /* round(llog_rec_hdr + llog_rec_tail) */
3112
3113 /* flags for the logs */
3114 enum llog_flag {
3115         LLOG_F_ZAP_WHEN_EMPTY   = 0x1,
3116         LLOG_F_IS_CAT           = 0x2,
3117         LLOG_F_IS_PLAIN         = 0x4,
3118 };
3119
3120 struct llog_log_hdr {
3121         struct llog_rec_hdr     llh_hdr;
3122         obd_time                llh_timestamp;
3123         __u32                   llh_count;
3124         __u32                   llh_bitmap_offset;
3125         __u32                   llh_size;
3126         __u32                   llh_flags;
3127         __u32                   llh_cat_idx;
3128         /* for a catalog the first plain slot is next to it */
3129         struct obd_uuid         llh_tgtuuid;
3130         __u32                   llh_reserved[LLOG_HEADER_SIZE/sizeof(__u32) - 23];
3131         __u32                   llh_bitmap[LLOG_BITMAP_BYTES/sizeof(__u32)];
3132         struct llog_rec_tail    llh_tail;
3133 } __attribute__((packed));
3134
3135 #define LLOG_BITMAP_SIZE(llh)  (__u32)((llh->llh_hdr.lrh_len -          \
3136                                         llh->llh_bitmap_offset -        \
3137                                         sizeof(llh->llh_tail)) * 8)
3138
3139 /** log cookies are used to reference a specific log file and a record therein */
3140 struct llog_cookie {
3141         struct llog_logid       lgc_lgl;
3142         __u32                   lgc_subsys;
3143         __u32                   lgc_index;
3144         __u32                   lgc_padding;
3145 } __attribute__((packed));
3146
3147 /** llog protocol */
3148 enum llogd_rpc_ops {
3149         LLOG_ORIGIN_HANDLE_CREATE       = 501,
3150         LLOG_ORIGIN_HANDLE_NEXT_BLOCK   = 502,
3151         LLOG_ORIGIN_HANDLE_READ_HEADER  = 503,
3152         LLOG_ORIGIN_HANDLE_WRITE_REC    = 504,
3153         LLOG_ORIGIN_HANDLE_CLOSE        = 505,
3154         LLOG_ORIGIN_CONNECT             = 506,
3155         LLOG_CATINFO                    = 507,  /* deprecated */
3156         LLOG_ORIGIN_HANDLE_PREV_BLOCK   = 508,
3157         LLOG_ORIGIN_HANDLE_DESTROY      = 509,  /* for destroy llog object*/
3158         LLOG_LAST_OPC,
3159         LLOG_FIRST_OPC                  = LLOG_ORIGIN_HANDLE_CREATE
3160 };
3161
3162 struct llogd_body {
3163         struct llog_logid  lgd_logid;
3164         __u32 lgd_ctxt_idx;
3165         __u32 lgd_llh_flags;
3166         __u32 lgd_index;
3167         __u32 lgd_saved_index;
3168         __u32 lgd_len;
3169         __u64 lgd_cur_offset;
3170 } __attribute__((packed));
3171
3172 struct llogd_conn_body {
3173         struct llog_gen         lgdc_gen;
3174         struct llog_logid       lgdc_logid;
3175         __u32                   lgdc_ctxt_idx;
3176 } __attribute__((packed));
3177
3178 /* Note: 64-bit types are 64-bit aligned in structure */
3179 struct obdo {
3180         obd_valid               o_valid;        /* hot fields in this obdo */
3181         struct ost_id           o_oi;
3182         obd_id                  o_parent_seq;
3183         obd_size                o_size;         /* o_size-o_blocks == ost_lvb */
3184         obd_time                o_mtime;
3185         obd_time                o_atime;
3186         obd_time                o_ctime;
3187         obd_blocks              o_blocks;       /* brw: cli sent cached bytes */
3188         obd_size                o_grant;
3189
3190         /* 32-bit fields start here: keep an even number of them via padding */
3191         obd_blksize             o_blksize;      /* optimal IO blocksize */
3192         obd_mode                o_mode;         /* brw: cli sent cache remain */
3193         obd_uid                 o_uid;
3194         obd_gid                 o_gid;
3195         obd_flag                o_flags;
3196         obd_count               o_nlink;        /* brw: checksum */
3197         obd_count               o_parent_oid;
3198         obd_count               o_misc;         /* brw: o_dropped */
3199
3200         __u64                   o_ioepoch;      /* epoch in ost writes */
3201         __u32                   o_stripe_idx;   /* holds stripe idx */
3202         __u32                   o_parent_ver;
3203         struct lustre_handle    o_handle;       /* brw: lock handle to prolong
3204                                                  * locks */
3205         struct llog_cookie      o_lcookie;      /* destroy: unlink cookie from
3206                                                  * MDS */
3207         __u32                   o_uid_h;
3208         __u32                   o_gid_h;
3209
3210         __u64                   o_data_version; /* getattr: sum of iversion for
3211                                                  * each stripe.
3212                                                  * brw: grant space consumed on
3213                                                  * the client for the write */
3214         __u64                   o_padding_4;
3215         __u64                   o_padding_5;
3216         __u64                   o_padding_6;
3217 };
3218
3219 #define o_dirty   o_blocks
3220 #define o_undirty o_mode
3221 #define o_dropped o_misc
3222 #define o_cksum   o_nlink
3223 #define o_grant_used o_data_version
3224
3225 static inline void lustre_set_wire_obdo(struct obd_connect_data *ocd,
3226                                         struct obdo *wobdo, struct obdo *lobdo)
3227 {
3228         memcpy(wobdo, lobdo, sizeof(*lobdo));
3229         wobdo->o_flags &= ~OBD_FL_LOCAL_MASK;
3230         if (ocd == NULL)
3231                 return;
3232
3233         if (unlikely(!(ocd->ocd_connect_flags & OBD_CONNECT_FID)) &&
3234             fid_seq_is_echo(fid_seq(&lobdo->o_oi.oi_fid))) {
3235                 /* Currently OBD_FL_OSTID will only be used when 2.4 echo
3236                  * client communicate with pre-2.4 server */
3237                 wobdo->o_oi.oi.oi_id = fid_oid(&lobdo->o_oi.oi_fid);
3238                 wobdo->o_oi.oi.oi_seq = fid_seq(&lobdo->o_oi.oi_fid);
3239         }
3240 }
3241
3242 static inline void lustre_get_wire_obdo(struct obd_connect_data *ocd,
3243                                         struct obdo *lobdo, struct obdo *wobdo)
3244 {
3245         obd_flag local_flags = 0;
3246
3247         if (lobdo->o_valid & OBD_MD_FLFLAGS)
3248                  local_flags = lobdo->o_flags & OBD_FL_LOCAL_MASK;
3249
3250         LASSERT(!(wobdo->o_flags & OBD_FL_LOCAL_MASK));
3251
3252         memcpy(lobdo, wobdo, sizeof(*lobdo));
3253         if (local_flags != 0) {
3254                 lobdo->o_valid |= OBD_MD_FLFLAGS;
3255                 lobdo->o_flags &= ~OBD_FL_LOCAL_MASK;
3256                 lobdo->o_flags |= local_flags;
3257         }
3258         if (ocd == NULL)
3259                 return;
3260
3261         if (unlikely(!(ocd->ocd_connect_flags & OBD_CONNECT_FID)) &&
3262             fid_seq_is_echo(wobdo->o_oi.oi.oi_seq)) {
3263                 /* see above */
3264                 lobdo->o_oi.oi_fid.f_seq = wobdo->o_oi.oi.oi_seq;
3265                 lobdo->o_oi.oi_fid.f_oid = wobdo->o_oi.oi.oi_id;
3266                 lobdo->o_oi.oi_fid.f_ver = 0;
3267         }
3268 }
3269
3270 extern void lustre_swab_obdo (struct obdo *o);
3271
3272 /* request structure for OST's */
3273 struct ost_body {
3274         struct  obdo oa;
3275 };
3276
3277 /* Key for FIEMAP to be used in get_info calls */
3278 struct ll_fiemap_info_key {
3279         char    name[8];
3280         struct  obdo oa;
3281         struct  ll_user_fiemap fiemap;
3282 };
3283
3284 extern void lustre_swab_ost_body (struct ost_body *b);
3285 extern void lustre_swab_ost_last_id(obd_id *id);
3286 extern void lustre_swab_fiemap(struct ll_user_fiemap *fiemap);
3287
3288 extern void lustre_swab_lov_user_md_v1(struct lov_user_md_v1 *lum);
3289 extern void lustre_swab_lov_user_md_v3(struct lov_user_md_v3 *lum);
3290 extern void lustre_swab_lov_user_md_objects(struct lov_user_ost_data *lod,
3291                                             int stripe_count);
3292 extern void lustre_swab_lov_mds_md(struct lov_mds_md *lmm);
3293
3294 /* llog_swab.c */
3295 extern void lustre_swab_llogd_body (struct llogd_body *d);
3296 extern void lustre_swab_llog_hdr (struct llog_log_hdr *h);
3297 extern void lustre_swab_llogd_conn_body (struct llogd_conn_body *d);
3298 extern void lustre_swab_llog_rec(struct llog_rec_hdr *rec);
3299 extern void lustre_swab_llog_id(struct llog_logid *lid);
3300
3301 struct lustre_cfg;
3302 extern void lustre_swab_lustre_cfg(struct lustre_cfg *lcfg);
3303
3304 /* Functions for dumping PTLRPC fields */
3305 void dump_rniobuf(struct niobuf_remote *rnb);
3306 void dump_ioo(struct obd_ioobj *nb);
3307 void dump_obdo(struct obdo *oa);
3308 void dump_ost_body(struct ost_body *ob);
3309 void dump_rcs(__u32 *rc);
3310
3311 #define IDX_INFO_MAGIC 0x3D37CC37
3312
3313 /* Index file transfer through the network. The server serializes the index into
3314  * a byte stream which is sent to the client via a bulk transfer */
3315 struct idx_info {
3316         __u32           ii_magic;
3317
3318         /* reply: see idx_info_flags below */
3319         __u32           ii_flags;
3320
3321         /* request & reply: number of lu_idxpage (to be) transferred */
3322         __u16           ii_count;
3323         __u16           ii_pad0;
3324
3325         /* request: requested attributes passed down to the iterator API */
3326         __u32           ii_attrs;
3327
3328         /* request & reply: index file identifier (FID) */
3329         struct lu_fid   ii_fid;
3330
3331         /* reply: version of the index file before starting to walk the index.
3332          * Please note that the version can be modified at any time during the
3333          * transfer */
3334         __u64           ii_version;
3335
3336         /* request: hash to start with:
3337          * reply: hash of the first entry of the first lu_idxpage and hash
3338          *        of the entry to read next if any */
3339         __u64           ii_hash_start;
3340         __u64           ii_hash_end;
3341
3342         /* reply: size of keys in lu_idxpages, minimal one if II_FL_VARKEY is
3343          * set */
3344         __u16           ii_keysize;
3345
3346         /* reply: size of records in lu_idxpages, minimal one if II_FL_VARREC
3347          * is set */
3348         __u16           ii_recsize;
3349
3350         __u32           ii_pad1;
3351         __u64           ii_pad2;
3352         __u64           ii_pad3;
3353 };
3354 extern void lustre_swab_idx_info(struct idx_info *ii);
3355
3356 #define II_END_OFF      MDS_DIR_END_OFF /* all entries have been read */
3357
3358 /* List of flags used in idx_info::ii_flags */
3359 enum idx_info_flags {
3360         II_FL_NOHASH    = 1 << 0, /* client doesn't care about hash value */
3361         II_FL_VARKEY    = 1 << 1, /* keys can be of variable size */
3362         II_FL_VARREC    = 1 << 2, /* records can be of variable size */
3363         II_FL_NONUNQ    = 1 << 3, /* index supports non-unique keys */
3364 };
3365
3366 #define LIP_MAGIC 0x8A6D6B6C
3367
3368 /* 4KB (= LU_PAGE_SIZE) container gathering key/record pairs */
3369 struct lu_idxpage {
3370         /* 16-byte header */
3371         __u32   lip_magic;
3372         __u16   lip_flags;
3373         __u16   lip_nr;   /* number of entries in the container */
3374         __u64   lip_pad0; /* additional padding for future use */
3375
3376         /* key/record pairs are stored in the remaining 4080 bytes.
3377          * depending upon the flags in idx_info::ii_flags, each key/record
3378          * pair might be preceded by:
3379          * - a hash value
3380          * - the key size (II_FL_VARKEY is set)
3381          * - the record size (II_FL_VARREC is set)
3382          *
3383          * For the time being, we only support fixed-size key & record. */
3384         char    lip_entries[0];
3385 };
3386 extern void lustre_swab_lip_header(struct lu_idxpage *lip);
3387
3388 #define LIP_HDR_SIZE (offsetof(struct lu_idxpage, lip_entries))
3389
3390 /* Gather all possible type associated with a 4KB container */
3391 union lu_page {
3392         struct lu_dirpage       lp_dir; /* for MDS_READPAGE */
3393         struct lu_idxpage       lp_idx; /* for OBD_IDX_READ */
3394         char                    lp_array[LU_PAGE_SIZE];
3395 };
3396
3397 /* security opcodes */
3398 typedef enum {
3399         SEC_CTX_INIT            = 801,
3400         SEC_CTX_INIT_CONT       = 802,
3401         SEC_CTX_FINI            = 803,
3402         SEC_LAST_OPC,
3403         SEC_FIRST_OPC           = SEC_CTX_INIT
3404 } sec_cmd_t;
3405
3406 /*
3407  * capa related definitions
3408  */
3409 #define CAPA_HMAC_MAX_LEN       64
3410 #define CAPA_HMAC_KEY_MAX_LEN   56
3411
3412 /* NB take care when changing the sequence of elements this struct,
3413  * because the offset info is used in find_capa() */
3414 struct lustre_capa {
3415         struct lu_fid   lc_fid;         /** fid */
3416         __u64           lc_opc;         /** operations allowed */
3417         __u64           lc_uid;         /** file owner */
3418         __u64           lc_gid;         /** file group */
3419         __u32           lc_flags;       /** HMAC algorithm & flags */
3420         __u32           lc_keyid;       /** key# used for the capability */
3421         __u32           lc_timeout;     /** capa timeout value (sec) */
3422         __u32           lc_expiry;      /** expiry time (sec) */
3423         __u8            lc_hmac[CAPA_HMAC_MAX_LEN];   /** HMAC */
3424 } __attribute__((packed));
3425
3426 extern void lustre_swab_lustre_capa(struct lustre_capa *c);
3427
3428 /** lustre_capa::lc_opc */
3429 enum {
3430         CAPA_OPC_BODY_WRITE   = 1<<0,  /**< write object data */
3431         CAPA_OPC_BODY_READ    = 1<<1,  /**< read object data */
3432         CAPA_OPC_INDEX_LOOKUP = 1<<2,  /**< lookup object fid */
3433         CAPA_OPC_INDEX_INSERT = 1<<3,  /**< insert object fid */
3434         CAPA_OPC_INDEX_DELETE = 1<<4,  /**< delete object fid */
3435         CAPA_OPC_OSS_WRITE    = 1<<5,  /**< write oss object data */
3436         CAPA_OPC_OSS_READ     = 1<<6,  /**< read oss object data */
3437         CAPA_OPC_OSS_TRUNC    = 1<<7,  /**< truncate oss object */
3438         CAPA_OPC_OSS_DESTROY  = 1<<8,  /**< destroy oss object */
3439         CAPA_OPC_META_WRITE   = 1<<9,  /**< write object meta data */
3440         CAPA_OPC_META_READ    = 1<<10, /**< read object meta data */
3441 };
3442
3443 #define CAPA_OPC_OSS_RW (CAPA_OPC_OSS_READ | CAPA_OPC_OSS_WRITE)
3444 #define CAPA_OPC_MDS_ONLY                                                   \
3445         (CAPA_OPC_BODY_WRITE | CAPA_OPC_BODY_READ | CAPA_OPC_INDEX_LOOKUP | \
3446          CAPA_OPC_INDEX_INSERT | CAPA_OPC_INDEX_DELETE)
3447 #define CAPA_OPC_OSS_ONLY                                                   \
3448         (CAPA_OPC_OSS_WRITE | CAPA_OPC_OSS_READ | CAPA_OPC_OSS_TRUNC |      \
3449          CAPA_OPC_OSS_DESTROY)
3450 #define CAPA_OPC_MDS_DEFAULT ~CAPA_OPC_OSS_ONLY
3451 #define CAPA_OPC_OSS_DEFAULT ~(CAPA_OPC_MDS_ONLY | CAPA_OPC_OSS_ONLY)
3452
3453 /* MDS capability covers object capability for operations of body r/w
3454  * (dir readpage/sendpage), index lookup/insert/delete and meta data r/w,
3455  * while OSS capability only covers object capability for operations of
3456  * oss data(file content) r/w/truncate.
3457  */
3458 static inline int capa_for_mds(struct lustre_capa *c)
3459 {
3460         return (c->lc_opc & CAPA_OPC_INDEX_LOOKUP) != 0;
3461 }
3462
3463 static inline int capa_for_oss(struct lustre_capa *c)
3464 {
3465         return (c->lc_opc & CAPA_OPC_INDEX_LOOKUP) == 0;
3466 }
3467
3468 /* lustre_capa::lc_hmac_alg */
3469 enum {
3470         CAPA_HMAC_ALG_SHA1 = 1, /**< sha1 algorithm */
3471         CAPA_HMAC_ALG_MAX,
3472 };
3473
3474 #define CAPA_FL_MASK            0x00ffffff
3475 #define CAPA_HMAC_ALG_MASK      0xff000000
3476
3477 struct lustre_capa_key {
3478         __u64   lk_seq;       /**< mds# */
3479         __u32   lk_keyid;     /**< key# */
3480         __u32   lk_padding;
3481         __u8    lk_key[CAPA_HMAC_KEY_MAX_LEN];    /**< key */
3482 } __attribute__((packed));
3483
3484 extern void lustre_swab_lustre_capa_key(struct lustre_capa_key *k);
3485
3486 /** The link ea holds 1 \a link_ea_entry for each hardlink */
3487 #define LINK_EA_MAGIC 0x11EAF1DFUL
3488 struct link_ea_header {
3489         __u32 leh_magic;
3490         __u32 leh_reccount;
3491         __u64 leh_len;      /* total size */
3492         /* future use */
3493         __u32 padding1;
3494         __u32 padding2;
3495 };
3496
3497 /** Hardlink data is name and parent fid.
3498  * Stored in this crazy struct for maximum packing and endian-neutrality
3499  */
3500 struct link_ea_entry {
3501         /** __u16 stored big-endian, unaligned */
3502         unsigned char      lee_reclen[2];
3503         unsigned char      lee_parent_fid[sizeof(struct lu_fid)];
3504         char               lee_name[0];
3505 }__attribute__((packed));
3506
3507 /** fid2path request/reply structure */
3508 struct getinfo_fid2path {
3509         struct lu_fid   gf_fid;
3510         __u64           gf_recno;
3511         __u32           gf_linkno;
3512         __u32           gf_pathlen;
3513         char            gf_path[0];
3514 } __attribute__((packed));
3515
3516 void lustre_swab_fid2path (struct getinfo_fid2path *gf);
3517
3518 enum {
3519         LAYOUT_INTENT_ACCESS    = 0,
3520         LAYOUT_INTENT_READ      = 1,
3521         LAYOUT_INTENT_WRITE     = 2,
3522         LAYOUT_INTENT_GLIMPSE   = 3,
3523         LAYOUT_INTENT_TRUNC     = 4,
3524         LAYOUT_INTENT_RELEASE   = 5,
3525         LAYOUT_INTENT_RESTORE   = 6
3526 };
3527
3528 /* enqueue layout lock with intent */
3529 struct layout_intent {
3530         __u32 li_opc; /* intent operation for enqueue, read, write etc */
3531         __u32 li_flags;
3532         __u64 li_start;
3533         __u64 li_end;
3534 };
3535
3536 void lustre_swab_layout_intent(struct layout_intent *li);
3537
3538 /**
3539  * On the wire version of hsm_progress structure.
3540  *
3541  * Contains the userspace hsm_progress and some internal fields.
3542  */
3543 struct hsm_progress_kernel {
3544         /* Field taken from struct hsm_progress */
3545         lustre_fid              hpk_fid;
3546         __u64                   hpk_cookie;
3547         struct hsm_extent       hpk_extent;
3548         __u16                   hpk_flags;
3549         __u16                   hpk_errval; /* positive val */
3550         __u32                   hpk_padding1;
3551         /* Additional fields */
3552         __u64                   hpk_data_version;
3553         __u64                   hpk_padding2;
3554 } __attribute__((packed));
3555
3556 extern void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
3557 extern void lustre_swab_hsm_current_action(struct hsm_current_action *action);
3558 extern void lustre_swab_hsm_progress_kernel(struct hsm_progress_kernel *hpk);
3559 extern void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
3560 extern void lustre_swab_hsm_user_item(struct hsm_user_item *hui);
3561 extern void lustre_swab_hsm_request(struct hsm_request *hr);
3562
3563 /**
3564  * These are object update opcode under UPDATE_OBJ, which is currently
3565  * being used by cross-ref operations between MDT.
3566  *
3567  * During the cross-ref operation, the Master MDT, which the client send the
3568  * request to, will disassembly the operation into object updates, then OSP
3569  * will send these updates to the remote MDT to be executed.
3570  *
3571  *   Update request format
3572  *   magic:  UPDATE_BUFFER_MAGIC_V1
3573  *   Count:  How many updates in the req.
3574  *   bufs[0] : following are packets of object.
3575  *   update[0]:
3576  *              type: object_update_op, the op code of update
3577  *              fid: The object fid of the update.
3578  *              lens/bufs: other parameters of the update.
3579  *   update[1]:
3580  *              type: object_update_op, the op code of update
3581  *              fid: The object fid of the update.
3582  *              lens/bufs: other parameters of the update.
3583  *   ..........
3584  *   update[7]: type: object_update_op, the op code of update
3585  *              fid: The object fid of the update.
3586  *              lens/bufs: other parameters of the update.
3587  *   Current 8 maxim updates per object update request.
3588  *
3589  *******************************************************************
3590  *   update reply format:
3591  *
3592  *   ur_version: UPDATE_REPLY_V1
3593  *   ur_count:   The count of the reply, which is usually equal
3594  *               to the number of updates in the request.
3595  *   ur_lens:    The reply lengths of each object update.
3596  *
3597  *   replies:    1st update reply  [4bytes_ret: other body]
3598  *               2nd update reply  [4bytes_ret: other body]
3599  *               .....
3600  *               nth update reply  [4bytes_ret: other body]
3601  *
3602  *   For each reply of the update, the format would be
3603  *       result(4 bytes):Other stuff
3604  */
3605
3606 #define UPDATE_MAX_OPS          10
3607 #define UPDATE_BUFFER_MAGIC_V1  0xBDDE0001
3608 #define UPDATE_BUFFER_MAGIC     UPDATE_BUFFER_MAGIC_V1
3609 #define UPDATE_BUF_COUNT        8
3610 enum object_update_op {
3611         OBJ_CREATE              = 1,
3612         OBJ_DESTROY             = 2,
3613         OBJ_REF_ADD             = 3,
3614         OBJ_REF_DEL             = 4,
3615         OBJ_ATTR_SET            = 5,
3616         OBJ_ATTR_GET            = 6,
3617         OBJ_XATTR_SET           = 7,
3618         OBJ_XATTR_GET           = 8,
3619         OBJ_INDEX_LOOKUP        = 9,
3620         OBJ_INDEX_INSERT        = 10,
3621         OBJ_INDEX_DELETE        = 11,
3622         OBJ_LAST
3623 };
3624
3625 struct update {
3626         __u32           u_type;
3627         __u32           u_batchid;
3628         struct lu_fid   u_fid;
3629         __u32           u_lens[UPDATE_BUF_COUNT];
3630         __u32           u_bufs[0];
3631 };
3632
3633 struct update_buf {
3634         __u32   ub_magic;
3635         __u32   ub_count;
3636         __u32   ub_bufs[0];
3637 };
3638
3639 #define UPDATE_REPLY_V1         0x00BD0001
3640 struct update_reply {
3641         __u32   ur_version;
3642         __u32   ur_count;
3643         __u32   ur_lens[0];
3644 };
3645
3646 void lustre_swab_update_buf(struct update_buf *ub);
3647 void lustre_swab_update_reply_buf(struct update_reply *ur);
3648
3649 /** layout swap request structure
3650  * fid1 and fid2 are in mdt_body
3651  */
3652 struct mdc_swap_layouts {
3653         __u64           msl_flags;
3654 } __packed;
3655
3656 void lustre_swab_swap_layouts(struct mdc_swap_layouts *msl);
3657
3658 #endif
3659 /** @} lustreidl */