Whamcloud - gitweb
LU-1187 mdd: a few missing stuff in MD stack for DNE.
[fs/lustre-release.git] / lustre / include / lu_object.h
1 /*
2  * GPL HEADER START
3  *
4  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 only,
8  * as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License version 2 for more details (a copy is included
14  * in the LICENSE file that accompanied this code).
15  *
16  * You should have received a copy of the GNU General Public License
17  * version 2 along with this program; If not, see
18  * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
19  *
20  * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
21  * CA 95054 USA or visit www.sun.com if you need additional information or
22  * have any questions.
23  *
24  * GPL HEADER END
25  */
26 /*
27  * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
28  * Use is subject to license terms.
29  *
30  * Copyright (c) 2011, 2012, Intel Corporation.
31  */
32 /*
33  * This file is part of Lustre, http://www.lustre.org/
34  * Lustre is a trademark of Sun Microsystems, Inc.
35  */
36
37 #ifndef __LUSTRE_LU_OBJECT_H
38 #define __LUSTRE_LU_OBJECT_H
39
40 #include <stdarg.h>
41
42 /*
43  * struct lu_fid
44  */
45 #include <libcfs/libcfs.h>
46
47 #include <lustre/lustre_idl.h>
48
49 #include <lu_ref.h>
50
51 struct seq_file;
52 struct proc_dir_entry;
53 struct lustre_cfg;
54 struct lprocfs_stats;
55
56 /** \defgroup lu lu
57  * lu_* data-types represent server-side entities shared by data and meta-data
58  * stacks.
59  *
60  * Design goals:
61  *
62  * -# support for layering.
63  *
64  *     Server side object is split into layers, one per device in the
65  *     corresponding device stack. Individual layer is represented by struct
66  *     lu_object. Compound layered object --- by struct lu_object_header. Most
67  *     interface functions take lu_object as an argument and operate on the
68  *     whole compound object. This decision was made due to the following
69  *     reasons:
70  *
71  *        - it's envisaged that lu_object will be used much more often than
72  *        lu_object_header;
73  *
74  *        - we want lower (non-top) layers to be able to initiate operations
75  *        on the whole object.
76  *
77  *     Generic code supports layering more complex than simple stacking, e.g.,
78  *     it is possible that at some layer object "spawns" multiple sub-objects
79  *     on the lower layer.
80  *
81  * -# fid-based identification.
82  *
83  *     Compound object is uniquely identified by its fid. Objects are indexed
84  *     by their fids (hash table is used for index).
85  *
86  * -# caching and life-cycle management.
87  *
88  *     Object's life-time is controlled by reference counting. When reference
89  *     count drops to 0, object is returned to cache. Cached objects still
90  *     retain their identity (i.e., fid), and can be recovered from cache.
91  *
92  *     Objects are kept in the global LRU list, and lu_site_purge() function
93  *     can be used to reclaim given number of unused objects from the tail of
94  *     the LRU.
95  *
96  * -# avoiding recursion.
97  *
98  *     Generic code tries to replace recursion through layers by iterations
99  *     where possible. Additionally to the end of reducing stack consumption,
100  *     data, when practically possible, are allocated through lu_context_key
101  *     interface rather than on stack.
102  * @{
103  */
104
105 struct lu_site;
106 struct lu_object;
107 struct lu_device;
108 struct lu_object_header;
109 struct lu_context;
110 struct lu_env;
111
112 /**
113  * Operations common for data and meta-data devices.
114  */
115 struct lu_device_operations {
116         /**
117          * Allocate object for the given device (without lower-layer
118          * parts). This is called by lu_object_operations::loo_object_init()
119          * from the parent layer, and should setup at least lu_object::lo_dev
120          * and lu_object::lo_ops fields of resulting lu_object.
121          *
122          * Object creation protocol.
123          *
124          * Due to design goal of avoiding recursion, object creation (see
125          * lu_object_alloc()) is somewhat involved:
126          *
127          *  - first, lu_device_operations::ldo_object_alloc() method of the
128          *  top-level device in the stack is called. It should allocate top
129          *  level object (including lu_object_header), but without any
130          *  lower-layer sub-object(s).
131          *
132          *  - then lu_object_alloc() sets fid in the header of newly created
133          *  object.
134          *
135          *  - then lu_object_operations::loo_object_init() is called. It has
136          *  to allocate lower-layer object(s). To do this,
137          *  lu_object_operations::loo_object_init() calls ldo_object_alloc()
138          *  of the lower-layer device(s).
139          *
140          *  - for all new objects allocated by
141          *  lu_object_operations::loo_object_init() (and inserted into object
142          *  stack), lu_object_operations::loo_object_init() is called again
143          *  repeatedly, until no new objects are created.
144          *
145          * \post ergo(!IS_ERR(result), result->lo_dev == d &&
146          *                             result->lo_ops != NULL);
147          */
148         struct lu_object *(*ldo_object_alloc)(const struct lu_env *env,
149                                               const struct lu_object_header *h,
150                                               struct lu_device *d);
151         /**
152          * process config specific for device.
153          */
154         int (*ldo_process_config)(const struct lu_env *env,
155                                   struct lu_device *, struct lustre_cfg *);
156         int (*ldo_recovery_complete)(const struct lu_env *,
157                                      struct lu_device *);
158
159         /**
160          * initialize local objects for device. this method called after layer has
161          * been initialized (after LCFG_SETUP stage) and before it starts serving
162          * user requests.
163          */
164
165         int (*ldo_prepare)(const struct lu_env *,
166                            struct lu_device *parent,
167                            struct lu_device *dev);
168
169 };
170
171 /**
172  * For lu_object_conf flags
173  */
174 typedef enum {
175         /* This is a new object to be allocated, or the file
176          * corresponding to the object does not exists. */
177         LOC_F_NEW       = 0x00000001,
178 } loc_flags_t;
179
180 /**
181  * Object configuration, describing particulars of object being created. On
182  * server this is not used, as server objects are full identified by fid. On
183  * client configuration contains struct lustre_md.
184  */
185 struct lu_object_conf {
186         /**
187          * Some hints for obj find and alloc.
188          */
189         loc_flags_t     loc_flags;
190 };
191
192 /**
193  * Type of "printer" function used by lu_object_operations::loo_object_print()
194  * method.
195  *
196  * Printer function is needed to provide some flexibility in (semi-)debugging
197  * output: possible implementations: printk, CDEBUG, sysfs/seq_file
198  */
199 typedef int (*lu_printer_t)(const struct lu_env *env,
200                             void *cookie, const char *format, ...)
201         __attribute__ ((format (printf, 3, 4)));
202
203 /**
204  * Operations specific for particular lu_object.
205  */
206 struct lu_object_operations {
207
208         /**
209          * Allocate lower-layer parts of the object by calling
210          * lu_device_operations::ldo_object_alloc() of the corresponding
211          * underlying device.
212          *
213          * This method is called once for each object inserted into object
214          * stack. It's responsibility of this method to insert lower-layer
215          * object(s) it create into appropriate places of object stack.
216          */
217         int (*loo_object_init)(const struct lu_env *env,
218                                struct lu_object *o,
219                                const struct lu_object_conf *conf);
220         /**
221          * Called (in top-to-bottom order) during object allocation after all
222          * layers were allocated and initialized. Can be used to perform
223          * initialization depending on lower layers.
224          */
225         int (*loo_object_start)(const struct lu_env *env,
226                                 struct lu_object *o);
227         /**
228          * Called before lu_object_operations::loo_object_free() to signal
229          * that object is being destroyed. Dual to
230          * lu_object_operations::loo_object_init().
231          */
232         void (*loo_object_delete)(const struct lu_env *env,
233                                   struct lu_object *o);
234         /**
235          * Dual to lu_device_operations::ldo_object_alloc(). Called when
236          * object is removed from memory.
237          */
238         void (*loo_object_free)(const struct lu_env *env,
239                                 struct lu_object *o);
240         /**
241          * Called when last active reference to the object is released (and
242          * object returns to the cache). This method is optional.
243          */
244         void (*loo_object_release)(const struct lu_env *env,
245                                    struct lu_object *o);
246         /**
247          * Optional debugging helper. Print given object.
248          */
249         int (*loo_object_print)(const struct lu_env *env, void *cookie,
250                                 lu_printer_t p, const struct lu_object *o);
251         /**
252          * Optional debugging method. Returns true iff method is internally
253          * consistent.
254          */
255         int (*loo_object_invariant)(const struct lu_object *o);
256 };
257
258 /**
259  * Type of lu_device.
260  */
261 struct lu_device_type;
262
263 /**
264  * Device: a layer in the server side abstraction stacking.
265  */
266 struct lu_device {
267         /**
268          * reference count. This is incremented, in particular, on each object
269          * created at this layer.
270          *
271          * \todo XXX which means that atomic_t is probably too small.
272          */
273         cfs_atomic_t                       ld_ref;
274         /**
275          * Pointer to device type. Never modified once set.
276          */
277         struct lu_device_type       *ld_type;
278         /**
279          * Operation vector for this device.
280          */
281         const struct lu_device_operations *ld_ops;
282         /**
283          * Stack this device belongs to.
284          */
285         struct lu_site                    *ld_site;
286         struct proc_dir_entry             *ld_proc_entry;
287
288         /** \todo XXX: temporary back pointer into obd. */
289         struct obd_device                 *ld_obd;
290         /**
291          * A list of references to this object, for debugging.
292          */
293         struct lu_ref                      ld_reference;
294         /**
295          * Link the device to the site.
296          **/
297         cfs_list_t                         ld_linkage;
298 };
299
300 struct lu_device_type_operations;
301
302 /**
303  * Tag bits for device type. They are used to distinguish certain groups of
304  * device types.
305  */
306 enum lu_device_tag {
307         /** this is meta-data device */
308         LU_DEVICE_MD = (1 << 0),
309         /** this is data device */
310         LU_DEVICE_DT = (1 << 1),
311         /** data device in the client stack */
312         LU_DEVICE_CL = (1 << 2)
313 };
314
315 /**
316  * Type of device.
317  */
318 struct lu_device_type {
319         /**
320          * Tag bits. Taken from enum lu_device_tag. Never modified once set.
321          */
322         __u32                                   ldt_tags;
323         /**
324          * Name of this class. Unique system-wide. Never modified once set.
325          */
326         char                                   *ldt_name;
327         /**
328          * Operations for this type.
329          */
330         const struct lu_device_type_operations *ldt_ops;
331         /**
332          * \todo XXX: temporary pointer to associated obd_type.
333          */
334         struct obd_type                        *ldt_obd_type;
335         /**
336          * \todo XXX: temporary: context tags used by obd_*() calls.
337          */
338         __u32                                   ldt_ctx_tags;
339         /**
340          * Number of existing device type instances.
341          */
342         unsigned                                ldt_device_nr;
343         /**
344          * Linkage into a global list of all device types.
345          *
346          * \see lu_device_types.
347          */
348         cfs_list_t                              ldt_linkage;
349 };
350
351 /**
352  * Operations on a device type.
353  */
354 struct lu_device_type_operations {
355         /**
356          * Allocate new device.
357          */
358         struct lu_device *(*ldto_device_alloc)(const struct lu_env *env,
359                                                struct lu_device_type *t,
360                                                struct lustre_cfg *lcfg);
361         /**
362          * Free device. Dual to
363          * lu_device_type_operations::ldto_device_alloc(). Returns pointer to
364          * the next device in the stack.
365          */
366         struct lu_device *(*ldto_device_free)(const struct lu_env *,
367                                               struct lu_device *);
368
369         /**
370          * Initialize the devices after allocation
371          */
372         int  (*ldto_device_init)(const struct lu_env *env,
373                                  struct lu_device *, const char *,
374                                  struct lu_device *);
375         /**
376          * Finalize device. Dual to
377          * lu_device_type_operations::ldto_device_init(). Returns pointer to
378          * the next device in the stack.
379          */
380         struct lu_device *(*ldto_device_fini)(const struct lu_env *env,
381                                               struct lu_device *);
382         /**
383          * Initialize device type. This is called on module load.
384          */
385         int  (*ldto_init)(struct lu_device_type *t);
386         /**
387          * Finalize device type. Dual to
388          * lu_device_type_operations::ldto_init(). Called on module unload.
389          */
390         void (*ldto_fini)(struct lu_device_type *t);
391         /**
392          * Called when the first device is created.
393          */
394         void (*ldto_start)(struct lu_device_type *t);
395         /**
396          * Called when number of devices drops to 0.
397          */
398         void (*ldto_stop)(struct lu_device_type *t);
399 };
400
401 /**
402  * Flags for the object layers.
403  */
404 enum lu_object_flags {
405         /**
406          * this flags is set if lu_object_operations::loo_object_init() has
407          * been called for this layer. Used by lu_object_alloc().
408          */
409         LU_OBJECT_ALLOCATED = (1 << 0)
410 };
411
412 /**
413  * Common object attributes.
414  */
415 struct lu_attr {
416         /** size in bytes */
417         __u64          la_size;
418         /** modification time in seconds since Epoch */
419         obd_time       la_mtime;
420         /** access time in seconds since Epoch */
421         obd_time       la_atime;
422         /** change time in seconds since Epoch */
423         obd_time       la_ctime;
424         /** 512-byte blocks allocated to object */
425         __u64          la_blocks;
426         /** permission bits and file type */
427         __u32          la_mode;
428         /** owner id */
429         __u32          la_uid;
430         /** group id */
431         __u32          la_gid;
432         /** object flags */
433         __u32          la_flags;
434         /** number of persistent references to this object */
435         __u32          la_nlink;
436         /** blk bits of the object*/
437         __u32          la_blkbits;
438         /** blk size of the object*/
439         __u32          la_blksize;
440         /** real device */
441         __u32          la_rdev;
442         /**
443          * valid bits
444          *
445          * \see enum la_valid
446          */
447         __u64          la_valid;
448 };
449
450 /** Bit-mask of valid attributes */
451 enum la_valid {
452         LA_ATIME = 1 << 0,
453         LA_MTIME = 1 << 1,
454         LA_CTIME = 1 << 2,
455         LA_SIZE  = 1 << 3,
456         LA_MODE  = 1 << 4,
457         LA_UID   = 1 << 5,
458         LA_GID   = 1 << 6,
459         LA_BLOCKS = 1 << 7,
460         LA_TYPE   = 1 << 8,
461         LA_FLAGS  = 1 << 9,
462         LA_NLINK  = 1 << 10,
463         LA_RDEV   = 1 << 11,
464         LA_BLKSIZE = 1 << 12,
465         LA_KILL_SUID = 1 << 13,
466         LA_KILL_SGID = 1 << 14,
467 };
468
469 /**
470  * Layer in the layered object.
471  */
472 struct lu_object {
473         /**
474          * Header for this object.
475          */
476         struct lu_object_header           *lo_header;
477         /**
478          * Device for this layer.
479          */
480         struct lu_device                  *lo_dev;
481         /**
482          * Operations for this object.
483          */
484         const struct lu_object_operations *lo_ops;
485         /**
486          * Linkage into list of all layers.
487          */
488         cfs_list_t                         lo_linkage;
489         /**
490          * Depth. Top level layer depth is 0.
491          */
492         int                                lo_depth;
493         /**
494          * Flags from enum lu_object_flags.
495          */
496         __u32                                   lo_flags;
497         /**
498          * Link to the device, for debugging.
499          */
500         struct lu_ref_link                *lo_dev_ref;
501 };
502
503 enum lu_object_header_flags {
504         /**
505          * Don't keep this object in cache. Object will be destroyed as soon
506          * as last reference to it is released. This flag cannot be cleared
507          * once set.
508          */
509         LU_OBJECT_HEARD_BANSHEE = 0
510 };
511
512 enum lu_object_header_attr {
513         LOHA_EXISTS   = 1 << 0,
514         LOHA_REMOTE   = 1 << 1,
515         /**
516          * UNIX file type is stored in S_IFMT bits.
517          */
518         LOHA_FT_START = 001 << 12, /**< S_IFIFO */
519         LOHA_FT_END   = 017 << 12, /**< S_IFMT */
520 };
521
522 /**
523  * "Compound" object, consisting of multiple layers.
524  *
525  * Compound object with given fid is unique with given lu_site.
526  *
527  * Note, that object does *not* necessary correspond to the real object in the
528  * persistent storage: object is an anchor for locking and method calling, so
529  * it is created for things like not-yet-existing child created by mkdir or
530  * create calls. lu_object_operations::loo_exists() can be used to check
531  * whether object is backed by persistent storage entity.
532  */
533 struct lu_object_header {
534         /**
535          * Object flags from enum lu_object_header_flags. Set and checked
536          * atomically.
537          */
538         unsigned long          loh_flags;
539         /**
540          * Object reference count. Protected by lu_site::ls_guard.
541          */
542         cfs_atomic_t           loh_ref;
543         /**
544          * Fid, uniquely identifying this object.
545          */
546         struct lu_fid          loh_fid;
547         /**
548          * Common object attributes, cached for efficiency. From enum
549          * lu_object_header_attr.
550          */
551         __u32                  loh_attr;
552         /**
553          * Linkage into per-site hash table. Protected by lu_site::ls_guard.
554          */
555         cfs_hlist_node_t       loh_hash;
556         /**
557          * Linkage into per-site LRU list. Protected by lu_site::ls_guard.
558          */
559         cfs_list_t             loh_lru;
560         /**
561          * Linkage into list of layers. Never modified once set (except lately
562          * during object destruction). No locking is necessary.
563          */
564         cfs_list_t             loh_layers;
565         /**
566          * A list of references to this object, for debugging.
567          */
568         struct lu_ref          loh_reference;
569 };
570
571 struct fld;
572
573 struct lu_site_bkt_data {
574         /**
575          * number of busy object on this bucket
576          */
577         long                      lsb_busy;
578         /**
579          * LRU list, updated on each access to object. Protected by
580          * bucket lock of lu_site::ls_obj_hash.
581          *
582          * "Cold" end of LRU is lu_site::ls_lru.next. Accessed object are
583          * moved to the lu_site::ls_lru.prev (this is due to the non-existence
584          * of list_for_each_entry_safe_reverse()).
585          */
586         cfs_list_t                lsb_lru;
587         /**
588          * Wait-queue signaled when an object in this site is ultimately
589          * destroyed (lu_object_free()). It is used by lu_object_find() to
590          * wait before re-trying when object in the process of destruction is
591          * found in the hash table.
592          *
593          * \see htable_lookup().
594          */
595         cfs_waitq_t               lsb_marche_funebre;
596 };
597
598 enum {
599         LU_SS_CREATED         = 0,
600         LU_SS_CACHE_HIT,
601         LU_SS_CACHE_MISS,
602         LU_SS_CACHE_RACE,
603         LU_SS_CACHE_DEATH_RACE,
604         LU_SS_LRU_PURGED,
605         LU_SS_LAST_STAT
606 };
607
608 /**
609  * lu_site is a "compartment" within which objects are unique, and LRU
610  * discipline is maintained.
611  *
612  * lu_site exists so that multiple layered stacks can co-exist in the same
613  * address space.
614  *
615  * lu_site has the same relation to lu_device as lu_object_header to
616  * lu_object.
617  */
618 struct lu_site {
619         /**
620          * objects hash table
621          */
622         cfs_hash_t               *ls_obj_hash;
623         /**
624          * index of bucket on hash table while purging
625          */
626         int                       ls_purge_start;
627         /**
628          * Top-level device for this stack.
629          */
630         struct lu_device         *ls_top_dev;
631         /**
632          * Bottom-level device for this stack
633          */
634         struct lu_device        *ls_bottom_dev;
635         /**
636          * Linkage into global list of sites.
637          */
638         cfs_list_t                ls_linkage;
639         /**
640          * List for lu device for this site, protected
641          * by ls_ld_lock.
642          **/
643         cfs_list_t                ls_ld_linkage;
644         spinlock_t              ls_ld_lock;
645
646         /**
647          * lu_site stats
648          */
649         struct lprocfs_stats    *ls_stats;
650         /**
651          * XXX: a hack! fld has to find md_site via site, remove when possible
652          */
653         struct seq_server_site  *ld_seq_site;
654 };
655
656 static inline struct lu_site_bkt_data *
657 lu_site_bkt_from_fid(struct lu_site *site, struct lu_fid *fid)
658 {
659         cfs_hash_bd_t bd;
660
661         cfs_hash_bd_get(site->ls_obj_hash, fid, &bd);
662         return cfs_hash_bd_extra_get(site->ls_obj_hash, &bd);
663 }
664
665 /** \name ctors
666  * Constructors/destructors.
667  * @{
668  */
669
670 int  lu_site_init         (struct lu_site *s, struct lu_device *d);
671 void lu_site_fini         (struct lu_site *s);
672 int  lu_site_init_finish  (struct lu_site *s);
673 void lu_stack_fini        (const struct lu_env *env, struct lu_device *top);
674 void lu_device_get        (struct lu_device *d);
675 void lu_device_put        (struct lu_device *d);
676 int  lu_device_init       (struct lu_device *d, struct lu_device_type *t);
677 void lu_device_fini       (struct lu_device *d);
678 int  lu_object_header_init(struct lu_object_header *h);
679 void lu_object_header_fini(struct lu_object_header *h);
680 int  lu_object_init       (struct lu_object *o,
681                            struct lu_object_header *h, struct lu_device *d);
682 void lu_object_fini       (struct lu_object *o);
683 void lu_object_add_top    (struct lu_object_header *h, struct lu_object *o);
684 void lu_object_add        (struct lu_object *before, struct lu_object *o);
685
686 void lu_dev_add_linkage(struct lu_site *s, struct lu_device *d);
687 void lu_dev_del_linkage(struct lu_site *s, struct lu_device *d);
688
689 /**
690  * Helpers to initialize and finalize device types.
691  */
692
693 int  lu_device_type_init(struct lu_device_type *ldt);
694 void lu_device_type_fini(struct lu_device_type *ldt);
695 void lu_types_stop(void);
696
697 /** @} ctors */
698
699 /** \name caching
700  * Caching and reference counting.
701  * @{
702  */
703
704 /**
705  * Acquire additional reference to the given object. This function is used to
706  * attain additional reference. To acquire initial reference use
707  * lu_object_find().
708  */
709 static inline void lu_object_get(struct lu_object *o)
710 {
711         LASSERT(cfs_atomic_read(&o->lo_header->loh_ref) > 0);
712         cfs_atomic_inc(&o->lo_header->loh_ref);
713 }
714
715 /**
716  * Return true of object will not be cached after last reference to it is
717  * released.
718  */
719 static inline int lu_object_is_dying(const struct lu_object_header *h)
720 {
721         return test_bit(LU_OBJECT_HEARD_BANSHEE, &h->loh_flags);
722 }
723
724 void lu_object_put(const struct lu_env *env, struct lu_object *o);
725 void lu_object_put_nocache(const struct lu_env *env, struct lu_object *o);
726
727 int lu_site_purge(const struct lu_env *env, struct lu_site *s, int nr);
728
729 void lu_site_print(const struct lu_env *env, struct lu_site *s, void *cookie,
730                    lu_printer_t printer);
731 struct lu_object *lu_object_find(const struct lu_env *env,
732                                  struct lu_device *dev, const struct lu_fid *f,
733                                  const struct lu_object_conf *conf);
734 struct lu_object *lu_object_find_at(const struct lu_env *env,
735                                     struct lu_device *dev,
736                                     const struct lu_fid *f,
737                                     const struct lu_object_conf *conf);
738 struct lu_object *lu_object_find_slice(const struct lu_env *env,
739                                        struct lu_device *dev,
740                                        const struct lu_fid *f,
741                                        const struct lu_object_conf *conf);
742 /** @} caching */
743
744 /** \name helpers
745  * Helpers.
746  * @{
747  */
748
749 /**
750  * First (topmost) sub-object of given compound object
751  */
752 static inline struct lu_object *lu_object_top(struct lu_object_header *h)
753 {
754         LASSERT(!cfs_list_empty(&h->loh_layers));
755         return container_of0(h->loh_layers.next, struct lu_object, lo_linkage);
756 }
757
758 /**
759  * Next sub-object in the layering
760  */
761 static inline struct lu_object *lu_object_next(const struct lu_object *o)
762 {
763         return container_of0(o->lo_linkage.next, struct lu_object, lo_linkage);
764 }
765
766 /**
767  * Pointer to the fid of this object.
768  */
769 static inline const struct lu_fid *lu_object_fid(const struct lu_object *o)
770 {
771         return &o->lo_header->loh_fid;
772 }
773
774 /**
775  * return device operations vector for this object
776  */
777 static const inline struct lu_device_operations *
778 lu_object_ops(const struct lu_object *o)
779 {
780         return o->lo_dev->ld_ops;
781 }
782
783 /**
784  * Given a compound object, find its slice, corresponding to the device type
785  * \a dtype.
786  */
787 struct lu_object *lu_object_locate(struct lu_object_header *h,
788                                    const struct lu_device_type *dtype);
789
790 /**
791  * Printer function emitting messages through libcfs_debug_msg().
792  */
793 int lu_cdebug_printer(const struct lu_env *env,
794                       void *cookie, const char *format, ...);
795
796 /**
797  * Print object description followed by a user-supplied message.
798  */
799 #define LU_OBJECT_DEBUG(mask, env, object, format, ...)                   \
800 do {                                                                      \
801         LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, mask, NULL);                  \
802                                                                           \
803         if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) {                     \
804                 lu_object_print(env, &msgdata, lu_cdebug_printer, object);\
805                 CDEBUG(mask, format , ## __VA_ARGS__);                    \
806         }                                                                 \
807 } while (0)
808
809 /**
810  * Print short object description followed by a user-supplied message.
811  */
812 #define LU_OBJECT_HEADER(mask, env, object, format, ...)                \
813 do {                                                                    \
814         LIBCFS_DEBUG_MSG_DATA_DECL(msgdata, mask, NULL);                \
815                                                                         \
816         if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) {                   \
817                 lu_object_header_print(env, &msgdata, lu_cdebug_printer,\
818                                        (object)->lo_header);            \
819                 lu_cdebug_printer(env, &msgdata, "\n");                 \
820                 CDEBUG(mask, format , ## __VA_ARGS__);                  \
821         }                                                               \
822 } while (0)
823
824 void lu_object_print       (const struct lu_env *env, void *cookie,
825                             lu_printer_t printer, const struct lu_object *o);
826 void lu_object_header_print(const struct lu_env *env, void *cookie,
827                             lu_printer_t printer,
828                             const struct lu_object_header *hdr);
829
830 /**
831  * Check object consistency.
832  */
833 int lu_object_invariant(const struct lu_object *o);
834
835
836 /**
837  * Check whether object exists, no matter on local or remote storage.
838  * Note: LOHA_EXISTS will be set once some one created the object,
839  * and it does not needs to be committed to storage.
840  */
841 #define lu_object_exists(o) ((o)->lo_header->loh_attr & LOHA_EXISTS)
842
843 /**
844  * Check whether object on the remote storage.
845  */
846 #define lu_object_remote(o) unlikely((o)->lo_header->loh_attr & LOHA_REMOTE)
847
848 static inline int lu_object_assert_exists(const struct lu_object *o)
849 {
850         return lu_object_exists(o);
851 }
852
853 static inline int lu_object_assert_not_exists(const struct lu_object *o)
854 {
855         return !lu_object_exists(o);
856 }
857
858 /**
859  * Attr of this object.
860  */
861 static inline __u32 lu_object_attr(const struct lu_object *o)
862 {
863         LASSERT(lu_object_exists(o) != 0);
864         return o->lo_header->loh_attr;
865 }
866
867 static inline struct lu_ref_link *lu_object_ref_add(struct lu_object *o,
868                                                     const char *scope,
869                                                     const void *source)
870 {
871         return lu_ref_add(&o->lo_header->loh_reference, scope, source);
872 }
873
874 static inline void lu_object_ref_del(struct lu_object *o,
875                                      const char *scope, const void *source)
876 {
877         lu_ref_del(&o->lo_header->loh_reference, scope, source);
878 }
879
880 static inline void lu_object_ref_del_at(struct lu_object *o,
881                                         struct lu_ref_link *link,
882                                         const char *scope, const void *source)
883 {
884         lu_ref_del_at(&o->lo_header->loh_reference, link, scope, source);
885 }
886
887 /** input params, should be filled out by mdt */
888 struct lu_rdpg {
889         /** hash */
890         __u64                   rp_hash;
891         /** count in bytes */
892         unsigned int            rp_count;
893         /** number of pages */
894         unsigned int            rp_npages;
895         /** requested attr */
896         __u32                   rp_attrs;
897         /** pointers to pages */
898         struct page           **rp_pages;
899 };
900
901 enum lu_xattr_flags {
902         LU_XATTR_REPLACE = (1 << 0),
903         LU_XATTR_CREATE  = (1 << 1)
904 };
905
906 /** @} helpers */
907
908 /** \name lu_context
909  * @{ */
910
911 /** For lu_context health-checks */
912 enum lu_context_state {
913         LCS_INITIALIZED = 1,
914         LCS_ENTERED,
915         LCS_LEFT,
916         LCS_FINALIZED
917 };
918
919 /**
920  * lu_context. Execution context for lu_object methods. Currently associated
921  * with thread.
922  *
923  * All lu_object methods, except device and device type methods (called during
924  * system initialization and shutdown) are executed "within" some
925  * lu_context. This means, that pointer to some "current" lu_context is passed
926  * as an argument to all methods.
927  *
928  * All service ptlrpc threads create lu_context as part of their
929  * initialization. It is possible to create "stand-alone" context for other
930  * execution environments (like system calls).
931  *
932  * lu_object methods mainly use lu_context through lu_context_key interface
933  * that allows each layer to associate arbitrary pieces of data with each
934  * context (see pthread_key_create(3) for similar interface).
935  *
936  * On a client, lu_context is bound to a thread, see cl_env_get().
937  *
938  * \see lu_context_key
939  */
940 struct lu_context {
941         /**
942          * lu_context is used on the client side too. Yet we don't want to
943          * allocate values of server-side keys for the client contexts and
944          * vice versa.
945          *
946          * To achieve this, set of tags in introduced. Contexts and keys are
947          * marked with tags. Key value are created only for context whose set
948          * of tags has non-empty intersection with one for key. Tags are taken
949          * from enum lu_context_tag.
950          */
951         __u32                  lc_tags;
952         enum lu_context_state  lc_state;
953         /**
954          * Pointer to the home service thread. NULL for other execution
955          * contexts.
956          */
957         struct ptlrpc_thread  *lc_thread;
958         /**
959          * Pointer to an array with key values. Internal implementation
960          * detail.
961          */
962         void                 **lc_value;
963         /**
964          * Linkage into a list of all remembered contexts. Only
965          * `non-transient' contexts, i.e., ones created for service threads
966          * are placed here.
967          */
968         cfs_list_t             lc_remember;
969         /**
970          * Version counter used to skip calls to lu_context_refill() when no
971          * keys were registered.
972          */
973         unsigned               lc_version;
974         /**
975          * Debugging cookie.
976          */
977         unsigned               lc_cookie;
978 };
979
980 /**
981  * lu_context_key interface. Similar to pthread_key.
982  */
983
984 enum lu_context_tag {
985         /**
986          * Thread on md server
987          */
988         LCT_MD_THREAD = 1 << 0,
989         /**
990          * Thread on dt server
991          */
992         LCT_DT_THREAD = 1 << 1,
993         /**
994          * Context for transaction handle
995          */
996         LCT_TX_HANDLE = 1 << 2,
997         /**
998          * Thread on client
999          */
1000         LCT_CL_THREAD = 1 << 3,
1001         /**
1002          * A per-request session on a server, and a per-system-call session on
1003          * a client.
1004          */
1005         LCT_SESSION   = 1 << 4,
1006         /**
1007          * A per-request data on OSP device
1008          */
1009         LCT_OSP_THREAD = 1 << 5,
1010         /**
1011          * MGS device thread
1012          */
1013         LCT_MG_THREAD = 1 << 6,
1014         /**
1015          * Context for local operations
1016          */
1017         LCT_LOCAL = 1 << 7,
1018         /**
1019          * Set when at least one of keys, having values in this context has
1020          * non-NULL lu_context_key::lct_exit() method. This is used to
1021          * optimize lu_context_exit() call.
1022          */
1023         LCT_HAS_EXIT  = 1 << 28,
1024         /**
1025          * Don't add references for modules creating key values in that context.
1026          * This is only for contexts used internally by lu_object framework.
1027          */
1028         LCT_NOREF     = 1 << 29,
1029         /**
1030          * Key is being prepared for retiring, don't create new values for it.
1031          */
1032         LCT_QUIESCENT = 1 << 30,
1033         /**
1034          * Context should be remembered.
1035          */
1036         LCT_REMEMBER  = 1 << 31,
1037         /**
1038          * Contexts usable in cache shrinker thread.
1039          */
1040         LCT_SHRINKER  = LCT_MD_THREAD|LCT_DT_THREAD|LCT_CL_THREAD|LCT_NOREF
1041 };
1042
1043 /**
1044  * Key. Represents per-context value slot.
1045  *
1046  * Keys are usually registered when module owning the key is initialized, and
1047  * de-registered when module is unloaded. Once key is registered, all new
1048  * contexts with matching tags, will get key value. "Old" contexts, already
1049  * initialized at the time of key registration, can be forced to get key value
1050  * by calling lu_context_refill().
1051  *
1052  * Every key value is counted in lu_context_key::lct_used and acquires a
1053  * reference on an owning module. This means, that all key values have to be
1054  * destroyed before module can be unloaded. This is usually achieved by
1055  * stopping threads started by the module, that created contexts in their
1056  * entry functions. Situation is complicated by the threads shared by multiple
1057  * modules, like ptlrpcd daemon on a client. To work around this problem,
1058  * contexts, created in such threads, are `remembered' (see
1059  * LCT_REMEMBER)---i.e., added into a global list. When module is preparing
1060  * for unloading it does the following:
1061  *
1062  *     - marks its keys as `quiescent' (lu_context_tag::LCT_QUIESCENT)
1063  *       preventing new key values from being allocated in the new contexts,
1064  *       and
1065  *
1066  *     - scans a list of remembered contexts, destroying values of module
1067  *       keys, thus releasing references to the module.
1068  *
1069  * This is done by lu_context_key_quiesce(). If module is re-activated
1070  * before key has been de-registered, lu_context_key_revive() call clears
1071  * `quiescent' marker.
1072  *
1073  * lu_context code doesn't provide any internal synchronization for these
1074  * activities---it's assumed that startup (including threads start-up) and
1075  * shutdown are serialized by some external means.
1076  *
1077  * \see lu_context
1078  */
1079 struct lu_context_key {
1080         /**
1081          * Set of tags for which values of this key are to be instantiated.
1082          */
1083         __u32 lct_tags;
1084         /**
1085          * Value constructor. This is called when new value is created for a
1086          * context. Returns pointer to new value of error pointer.
1087          */
1088         void  *(*lct_init)(const struct lu_context *ctx,
1089                            struct lu_context_key *key);
1090         /**
1091          * Value destructor. Called when context with previously allocated
1092          * value of this slot is destroyed. \a data is a value that was returned
1093          * by a matching call to lu_context_key::lct_init().
1094          */
1095         void   (*lct_fini)(const struct lu_context *ctx,
1096                            struct lu_context_key *key, void *data);
1097         /**
1098          * Optional method called on lu_context_exit() for all allocated
1099          * keys. Can be used by debugging code checking that locks are
1100          * released, etc.
1101          */
1102         void   (*lct_exit)(const struct lu_context *ctx,
1103                            struct lu_context_key *key, void *data);
1104         /**
1105          * Internal implementation detail: index within lu_context::lc_value[]
1106          * reserved for this key.
1107          */
1108         int      lct_index;
1109         /**
1110          * Internal implementation detail: number of values created for this
1111          * key.
1112          */
1113         cfs_atomic_t lct_used;
1114         /**
1115          * Internal implementation detail: module for this key.
1116          */
1117         cfs_module_t *lct_owner;
1118         /**
1119          * References to this key. For debugging.
1120          */
1121         struct lu_ref  lct_reference;
1122 };
1123
1124 #define LU_KEY_INIT(mod, type)                                    \
1125         static void* mod##_key_init(const struct lu_context *ctx, \
1126                                     struct lu_context_key *key)   \
1127         {                                                         \
1128                 type *value;                                      \
1129                                                                   \
1130                 CLASSERT(CFS_PAGE_SIZE >= sizeof (*value));       \
1131                                                                   \
1132                 OBD_ALLOC_PTR(value);                             \
1133                 if (value == NULL)                                \
1134                         value = ERR_PTR(-ENOMEM);                 \
1135                                                                   \
1136                 return value;                                     \
1137         }                                                         \
1138         struct __##mod##__dummy_init {;} /* semicolon catcher */
1139
1140 #define LU_KEY_FINI(mod, type)                                              \
1141         static void mod##_key_fini(const struct lu_context *ctx,            \
1142                                     struct lu_context_key *key, void* data) \
1143         {                                                                   \
1144                 type *info = data;                                          \
1145                                                                             \
1146                 OBD_FREE_PTR(info);                                         \
1147         }                                                                   \
1148         struct __##mod##__dummy_fini {;} /* semicolon catcher */
1149
1150 #define LU_KEY_INIT_FINI(mod, type)   \
1151         LU_KEY_INIT(mod,type);        \
1152         LU_KEY_FINI(mod,type)
1153
1154 #define LU_CONTEXT_KEY_DEFINE(mod, tags)                \
1155         struct lu_context_key mod##_thread_key = {      \
1156                 .lct_tags = tags,                       \
1157                 .lct_init = mod##_key_init,             \
1158                 .lct_fini = mod##_key_fini              \
1159         }
1160
1161 #define LU_CONTEXT_KEY_INIT(key)                        \
1162 do {                                                    \
1163         (key)->lct_owner = THIS_MODULE;                 \
1164 } while (0)
1165
1166 int   lu_context_key_register(struct lu_context_key *key);
1167 void  lu_context_key_degister(struct lu_context_key *key);
1168 void *lu_context_key_get     (const struct lu_context *ctx,
1169                                const struct lu_context_key *key);
1170 void  lu_context_key_quiesce (struct lu_context_key *key);
1171 void  lu_context_key_revive  (struct lu_context_key *key);
1172
1173
1174 /*
1175  * LU_KEY_INIT_GENERIC() has to be a macro to correctly determine an
1176  * owning module.
1177  */
1178
1179 #define LU_KEY_INIT_GENERIC(mod)                                        \
1180         static void mod##_key_init_generic(struct lu_context_key *k, ...) \
1181         {                                                               \
1182                 struct lu_context_key *key = k;                         \
1183                 va_list args;                                           \
1184                                                                         \
1185                 va_start(args, k);                                      \
1186                 do {                                                    \
1187                         LU_CONTEXT_KEY_INIT(key);                       \
1188                         key = va_arg(args, struct lu_context_key *);    \
1189                 } while (key != NULL);                                  \
1190                 va_end(args);                                           \
1191         }
1192
1193 #define LU_TYPE_INIT(mod, ...)                                          \
1194         LU_KEY_INIT_GENERIC(mod)                                        \
1195         static int mod##_type_init(struct lu_device_type *t)            \
1196         {                                                               \
1197                 mod##_key_init_generic(__VA_ARGS__, NULL);              \
1198                 return lu_context_key_register_many(__VA_ARGS__, NULL); \
1199         }                                                               \
1200         struct __##mod##_dummy_type_init {;}
1201
1202 #define LU_TYPE_FINI(mod, ...)                                          \
1203         static void mod##_type_fini(struct lu_device_type *t)           \
1204         {                                                               \
1205                 lu_context_key_degister_many(__VA_ARGS__, NULL);        \
1206         }                                                               \
1207         struct __##mod##_dummy_type_fini {;}
1208
1209 #define LU_TYPE_START(mod, ...)                                 \
1210         static void mod##_type_start(struct lu_device_type *t)  \
1211         {                                                       \
1212                 lu_context_key_revive_many(__VA_ARGS__, NULL);  \
1213         }                                                       \
1214         struct __##mod##_dummy_type_start {;}
1215
1216 #define LU_TYPE_STOP(mod, ...)                                  \
1217         static void mod##_type_stop(struct lu_device_type *t)   \
1218         {                                                       \
1219                 lu_context_key_quiesce_many(__VA_ARGS__, NULL); \
1220         }                                                       \
1221         struct __##mod##_dummy_type_stop {;}
1222
1223
1224
1225 #define LU_TYPE_INIT_FINI(mod, ...)             \
1226         LU_TYPE_INIT(mod, __VA_ARGS__);         \
1227         LU_TYPE_FINI(mod, __VA_ARGS__);         \
1228         LU_TYPE_START(mod, __VA_ARGS__);        \
1229         LU_TYPE_STOP(mod, __VA_ARGS__)
1230
1231 int   lu_context_init  (struct lu_context *ctx, __u32 tags);
1232 void  lu_context_fini  (struct lu_context *ctx);
1233 void  lu_context_enter (struct lu_context *ctx);
1234 void  lu_context_exit  (struct lu_context *ctx);
1235 int   lu_context_refill(struct lu_context *ctx);
1236
1237 /*
1238  * Helper functions to operate on multiple keys. These are used by the default
1239  * device type operations, defined by LU_TYPE_INIT_FINI().
1240  */
1241
1242 int  lu_context_key_register_many(struct lu_context_key *k, ...);
1243 void lu_context_key_degister_many(struct lu_context_key *k, ...);
1244 void lu_context_key_revive_many  (struct lu_context_key *k, ...);
1245 void lu_context_key_quiesce_many (struct lu_context_key *k, ...);
1246
1247 /*
1248  * update/clear ctx/ses tags.
1249  */
1250 void lu_context_tags_update(__u32 tags);
1251 void lu_context_tags_clear(__u32 tags);
1252 void lu_session_tags_update(__u32 tags);
1253 void lu_session_tags_clear(__u32 tags);
1254
1255 /**
1256  * Environment.
1257  */
1258 struct lu_env {
1259         /**
1260          * "Local" context, used to store data instead of stack.
1261          */
1262         struct lu_context  le_ctx;
1263         /**
1264          * "Session" context for per-request data.
1265          */
1266         struct lu_context *le_ses;
1267 };
1268
1269 int  lu_env_init  (struct lu_env *env, __u32 tags);
1270 void lu_env_fini  (struct lu_env *env);
1271 int  lu_env_refill(struct lu_env *env);
1272 int  lu_env_refill_by_tags(struct lu_env *env, __u32 ctags, __u32 stags);
1273
1274 /** @} lu_context */
1275
1276 struct lu_ucred {
1277         __u32               uc_valid;
1278         __u32               uc_o_uid;
1279         __u32               uc_o_gid;
1280         __u32               uc_o_fsuid;
1281         __u32               uc_o_fsgid;
1282         __u32               uc_uid;
1283         __u32               uc_gid;
1284         __u32               uc_fsuid;
1285         __u32               uc_fsgid;
1286         __u32               uc_suppgids[2];
1287         cfs_cap_t           uc_cap;
1288         __u32               uc_umask;
1289         cfs_group_info_t   *uc_ginfo;
1290         struct md_identity *uc_identity;
1291 };
1292 struct lu_ucred *lu_ucred(const struct lu_env *env);
1293 struct lu_ucred *lu_ucred_check(const struct lu_env *env);
1294 struct lu_ucred *lu_ucred_assert(const struct lu_env *env);
1295
1296 /**
1297  * Output site statistical counters into a buffer. Suitable for
1298  * ll_rd_*()-style functions.
1299  */
1300 int lu_site_stats_print(const struct lu_site *s, char *page, int count);
1301
1302 /**
1303  * Common name structure to be passed around for various name related methods.
1304  */
1305 struct lu_name {
1306         const char    *ln_name;
1307         int            ln_namelen;
1308 };
1309
1310 /**
1311  * Common buffer structure to be passed around for various xattr_{s,g}et()
1312  * methods.
1313  */
1314 struct lu_buf {
1315         void   *lb_buf;
1316         ssize_t lb_len;
1317 };
1318
1319 /** null buffer */
1320 extern struct lu_buf LU_BUF_NULL;
1321
1322 #define DLUBUF "(%p %zu)"
1323 #define PLUBUF(buf) (buf)->lb_buf, (buf)->lb_len
1324 /**
1325  * One-time initializers, called at obdclass module initialization, not
1326  * exported.
1327  */
1328
1329 /**
1330  * Initialization of global lu_* data.
1331  */
1332 int lu_global_init(void);
1333
1334 /**
1335  * Dual to lu_global_init().
1336  */
1337 void lu_global_fini(void);
1338
1339 struct lu_kmem_descr {
1340         cfs_mem_cache_t **ckd_cache;
1341         const char       *ckd_name;
1342         const size_t      ckd_size;
1343 };
1344
1345 int  lu_kmem_init(struct lu_kmem_descr *caches);
1346 void lu_kmem_fini(struct lu_kmem_descr *caches);
1347
1348 void lu_object_assign_fid(const struct lu_env *env, struct lu_object *o,
1349                           const struct lu_fid *fid);
1350 struct lu_object *lu_object_anon(const struct lu_env *env,
1351                                  struct lu_device *dev,
1352                                  const struct lu_object_conf *conf);
1353
1354 /** @} lu */
1355 #endif /* __LUSTRE_LU_OBJECT_H */