Whamcloud - gitweb
LU-80 lov: large stripe count support
[fs/lustre-release.git] / lustre / include / lu_object.h
1 /* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
2  * vim:expandtab:shiftwidth=8:tabstop=8:
3  *
4  * GPL HEADER START
5  *
6  * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 only,
10  * as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License version 2 for more details (a copy is included
16  * in the LICENSE file that accompanied this code).
17  *
18  * You should have received a copy of the GNU General Public License
19  * version 2 along with this program; If not, see
20  * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
21  *
22  * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
23  * CA 95054 USA or visit www.sun.com if you need additional information or
24  * have any questions.
25  *
26  * GPL HEADER END
27  */
28 /*
29  * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
30  * Use is subject to license terms.
31  */
32 /*
33  * Copyright (c) 2011 Whamcloud, Inc.
34  */
35 /*
36  * This file is part of Lustre, http://www.lustre.org/
37  * Lustre is a trademark of Sun Microsystems, Inc.
38  */
39
40 #ifndef __LUSTRE_LU_OBJECT_H
41 #define __LUSTRE_LU_OBJECT_H
42
43 #include <stdarg.h>
44
45 /*
46  * struct lu_fid
47  */
48 #include <libcfs/libcfs.h>
49
50 #include <lustre/lustre_idl.h>
51
52 #include <lu_ref.h>
53
54 struct seq_file;
55 struct proc_dir_entry;
56 struct lustre_cfg;
57 struct lprocfs_stats;
58
59 /** \defgroup lu lu
60  * lu_* data-types represent server-side entities shared by data and meta-data
61  * stacks.
62  *
63  * Design goals:
64  *
65  * -# support for layering.
66  *
67  *     Server side object is split into layers, one per device in the
68  *     corresponding device stack. Individual layer is represented by struct
69  *     lu_object. Compound layered object --- by struct lu_object_header. Most
70  *     interface functions take lu_object as an argument and operate on the
71  *     whole compound object. This decision was made due to the following
72  *     reasons:
73  *
74  *        - it's envisaged that lu_object will be used much more often than
75  *        lu_object_header;
76  *
77  *        - we want lower (non-top) layers to be able to initiate operations
78  *        on the whole object.
79  *
80  *     Generic code supports layering more complex than simple stacking, e.g.,
81  *     it is possible that at some layer object "spawns" multiple sub-objects
82  *     on the lower layer.
83  *
84  * -# fid-based identification.
85  *
86  *     Compound object is uniquely identified by its fid. Objects are indexed
87  *     by their fids (hash table is used for index).
88  *
89  * -# caching and life-cycle management.
90  *
91  *     Object's life-time is controlled by reference counting. When reference
92  *     count drops to 0, object is returned to cache. Cached objects still
93  *     retain their identity (i.e., fid), and can be recovered from cache.
94  *
95  *     Objects are kept in the global LRU list, and lu_site_purge() function
96  *     can be used to reclaim given number of unused objects from the tail of
97  *     the LRU.
98  *
99  * -# avoiding recursion.
100  *
101  *     Generic code tries to replace recursion through layers by iterations
102  *     where possible. Additionally to the end of reducing stack consumption,
103  *     data, when practically possible, are allocated through lu_context_key
104  *     interface rather than on stack.
105  * @{
106  */
107
108 struct lu_site;
109 struct lu_object;
110 struct lu_device;
111 struct lu_object_header;
112 struct lu_context;
113 struct lu_env;
114
115 /**
116  * Operations common for data and meta-data devices.
117  */
118 struct lu_device_operations {
119         /**
120          * Allocate object for the given device (without lower-layer
121          * parts). This is called by lu_object_operations::loo_object_init()
122          * from the parent layer, and should setup at least lu_object::lo_dev
123          * and lu_object::lo_ops fields of resulting lu_object.
124          *
125          * Object creation protocol.
126          *
127          * Due to design goal of avoiding recursion, object creation (see
128          * lu_object_alloc()) is somewhat involved:
129          *
130          *  - first, lu_device_operations::ldo_object_alloc() method of the
131          *  top-level device in the stack is called. It should allocate top
132          *  level object (including lu_object_header), but without any
133          *  lower-layer sub-object(s).
134          *
135          *  - then lu_object_alloc() sets fid in the header of newly created
136          *  object.
137          *
138          *  - then lu_object_operations::loo_object_init() is called. It has
139          *  to allocate lower-layer object(s). To do this,
140          *  lu_object_operations::loo_object_init() calls ldo_object_alloc()
141          *  of the lower-layer device(s).
142          *
143          *  - for all new objects allocated by
144          *  lu_object_operations::loo_object_init() (and inserted into object
145          *  stack), lu_object_operations::loo_object_init() is called again
146          *  repeatedly, until no new objects are created.
147          *
148          * \post ergo(!IS_ERR(result), result->lo_dev == d &&
149          *                             result->lo_ops != NULL);
150          */
151         struct lu_object *(*ldo_object_alloc)(const struct lu_env *env,
152                                               const struct lu_object_header *h,
153                                               struct lu_device *d);
154         /**
155          * process config specific for device.
156          */
157         int (*ldo_process_config)(const struct lu_env *env,
158                                   struct lu_device *, struct lustre_cfg *);
159         int (*ldo_recovery_complete)(const struct lu_env *,
160                                      struct lu_device *);
161
162         /**
163          * initialize local objects for device. this method called after layer has
164          * been initialized (after LCFG_SETUP stage) and before it starts serving
165          * user requests.
166          */
167
168         int (*ldo_prepare)(const struct lu_env *,
169                            struct lu_device *parent,
170                            struct lu_device *dev);
171
172 };
173
174 /**
175  * For lu_object_conf flags
176  */
177 typedef enum {
178         /* Currently, only used for client-side object initialization. */
179         LOC_F_NEW = 0x1,
180 } loc_flags_t;
181
182 /**
183  * Object configuration, describing particulars of object being created. On
184  * server this is not used, as server objects are full identified by fid. On
185  * client configuration contains struct lustre_md.
186  */
187 struct lu_object_conf {
188         /**
189          * Some hints for obj find and alloc.
190          */
191         loc_flags_t     loc_flags;
192 };
193
194 /**
195  * Type of "printer" function used by lu_object_operations::loo_object_print()
196  * method.
197  *
198  * Printer function is needed to provide some flexibility in (semi-)debugging
199  * output: possible implementations: printk, CDEBUG, sysfs/seq_file
200  */
201 typedef int (*lu_printer_t)(const struct lu_env *env,
202                             void *cookie, const char *format, ...)
203         __attribute__ ((format (printf, 3, 4)));
204
205 /**
206  * Operations specific for particular lu_object.
207  */
208 struct lu_object_operations {
209
210         /**
211          * Allocate lower-layer parts of the object by calling
212          * lu_device_operations::ldo_object_alloc() of the corresponding
213          * underlying device.
214          *
215          * This method is called once for each object inserted into object
216          * stack. It's responsibility of this method to insert lower-layer
217          * object(s) it create into appropriate places of object stack.
218          */
219         int (*loo_object_init)(const struct lu_env *env,
220                                struct lu_object *o,
221                                const struct lu_object_conf *conf);
222         /**
223          * Called (in top-to-bottom order) during object allocation after all
224          * layers were allocated and initialized. Can be used to perform
225          * initialization depending on lower layers.
226          */
227         int (*loo_object_start)(const struct lu_env *env,
228                                 struct lu_object *o);
229         /**
230          * Called before lu_object_operations::loo_object_free() to signal
231          * that object is being destroyed. Dual to
232          * lu_object_operations::loo_object_init().
233          */
234         void (*loo_object_delete)(const struct lu_env *env,
235                                   struct lu_object *o);
236         /**
237          * Dual to lu_device_operations::ldo_object_alloc(). Called when
238          * object is removed from memory.
239          */
240         void (*loo_object_free)(const struct lu_env *env,
241                                 struct lu_object *o);
242         /**
243          * Called when last active reference to the object is released (and
244          * object returns to the cache). This method is optional.
245          */
246         void (*loo_object_release)(const struct lu_env *env,
247                                    struct lu_object *o);
248         /**
249          * Optional debugging helper. Print given object.
250          */
251         int (*loo_object_print)(const struct lu_env *env, void *cookie,
252                                 lu_printer_t p, const struct lu_object *o);
253         /**
254          * Optional debugging method. Returns true iff method is internally
255          * consistent.
256          */
257         int (*loo_object_invariant)(const struct lu_object *o);
258 };
259
260 /**
261  * Type of lu_device.
262  */
263 struct lu_device_type;
264
265 /**
266  * Device: a layer in the server side abstraction stacking.
267  */
268 struct lu_device {
269         /**
270          * reference count. This is incremented, in particular, on each object
271          * created at this layer.
272          *
273          * \todo XXX which means that atomic_t is probably too small.
274          */
275         cfs_atomic_t                       ld_ref;
276         /**
277          * Pointer to device type. Never modified once set.
278          */
279         struct lu_device_type       *ld_type;
280         /**
281          * Operation vector for this device.
282          */
283         const struct lu_device_operations *ld_ops;
284         /**
285          * Stack this device belongs to.
286          */
287         struct lu_site                    *ld_site;
288         struct proc_dir_entry             *ld_proc_entry;
289
290         /** \todo XXX: temporary back pointer into obd. */
291         struct obd_device                 *ld_obd;
292         /**
293          * A list of references to this object, for debugging.
294          */
295         struct lu_ref                      ld_reference;
296 };
297
298 struct lu_device_type_operations;
299
300 /**
301  * Tag bits for device type. They are used to distinguish certain groups of
302  * device types.
303  */
304 enum lu_device_tag {
305         /** this is meta-data device */
306         LU_DEVICE_MD = (1 << 0),
307         /** this is data device */
308         LU_DEVICE_DT = (1 << 1),
309         /** data device in the client stack */
310         LU_DEVICE_CL = (1 << 2)
311 };
312
313 /**
314  * Type of device.
315  */
316 struct lu_device_type {
317         /**
318          * Tag bits. Taken from enum lu_device_tag. Never modified once set.
319          */
320         __u32                                   ldt_tags;
321         /**
322          * Name of this class. Unique system-wide. Never modified once set.
323          */
324         char                                   *ldt_name;
325         /**
326          * Operations for this type.
327          */
328         const struct lu_device_type_operations *ldt_ops;
329         /**
330          * \todo XXX: temporary pointer to associated obd_type.
331          */
332         struct obd_type                        *ldt_obd_type;
333         /**
334          * \todo XXX: temporary: context tags used by obd_*() calls.
335          */
336         __u32                                   ldt_ctx_tags;
337         /**
338          * Number of existing device type instances.
339          */
340         unsigned                                ldt_device_nr;
341         /**
342          * Linkage into a global list of all device types.
343          *
344          * \see lu_device_types.
345          */
346         cfs_list_t                              ldt_linkage;
347 };
348
349 /**
350  * Operations on a device type.
351  */
352 struct lu_device_type_operations {
353         /**
354          * Allocate new device.
355          */
356         struct lu_device *(*ldto_device_alloc)(const struct lu_env *env,
357                                                struct lu_device_type *t,
358                                                struct lustre_cfg *lcfg);
359         /**
360          * Free device. Dual to
361          * lu_device_type_operations::ldto_device_alloc(). Returns pointer to
362          * the next device in the stack.
363          */
364         struct lu_device *(*ldto_device_free)(const struct lu_env *,
365                                               struct lu_device *);
366
367         /**
368          * Initialize the devices after allocation
369          */
370         int  (*ldto_device_init)(const struct lu_env *env,
371                                  struct lu_device *, const char *,
372                                  struct lu_device *);
373         /**
374          * Finalize device. Dual to
375          * lu_device_type_operations::ldto_device_init(). Returns pointer to
376          * the next device in the stack.
377          */
378         struct lu_device *(*ldto_device_fini)(const struct lu_env *env,
379                                               struct lu_device *);
380         /**
381          * Initialize device type. This is called on module load.
382          */
383         int  (*ldto_init)(struct lu_device_type *t);
384         /**
385          * Finalize device type. Dual to
386          * lu_device_type_operations::ldto_init(). Called on module unload.
387          */
388         void (*ldto_fini)(struct lu_device_type *t);
389         /**
390          * Called when the first device is created.
391          */
392         void (*ldto_start)(struct lu_device_type *t);
393         /**
394          * Called when number of devices drops to 0.
395          */
396         void (*ldto_stop)(struct lu_device_type *t);
397 };
398
399 /**
400  * Flags for the object layers.
401  */
402 enum lu_object_flags {
403         /**
404          * this flags is set if lu_object_operations::loo_object_init() has
405          * been called for this layer. Used by lu_object_alloc().
406          */
407         LU_OBJECT_ALLOCATED = (1 << 0)
408 };
409
410 /**
411  * Common object attributes.
412  */
413 struct lu_attr {
414         /** size in bytes */
415         __u64          la_size;
416         /** modification time in seconds since Epoch */
417         obd_time       la_mtime;
418         /** access time in seconds since Epoch */
419         obd_time       la_atime;
420         /** change time in seconds since Epoch */
421         obd_time       la_ctime;
422         /** 512-byte blocks allocated to object */
423         __u64          la_blocks;
424         /** permission bits and file type */
425         __u32          la_mode;
426         /** owner id */
427         __u32          la_uid;
428         /** group id */
429         __u32          la_gid;
430         /** object flags */
431         __u32          la_flags;
432         /** number of persistent references to this object */
433         __u32          la_nlink;
434         /** blk bits of the object*/
435         __u32          la_blkbits;
436         /** blk size of the object*/
437         __u32          la_blksize;
438         /** real device */
439         __u32          la_rdev;
440         /**
441          * valid bits
442          *
443          * \see enum la_valid
444          */
445         __u64          la_valid;
446 };
447
448 /** Bit-mask of valid attributes */
449 enum la_valid {
450         LA_ATIME = 1 << 0,
451         LA_MTIME = 1 << 1,
452         LA_CTIME = 1 << 2,
453         LA_SIZE  = 1 << 3,
454         LA_MODE  = 1 << 4,
455         LA_UID   = 1 << 5,
456         LA_GID   = 1 << 6,
457         LA_BLOCKS = 1 << 7,
458         LA_TYPE   = 1 << 8,
459         LA_FLAGS  = 1 << 9,
460         LA_NLINK  = 1 << 10,
461         LA_RDEV   = 1 << 11,
462         LA_BLKSIZE = 1 << 12,
463         LA_KILL_SUID = 1 << 13,
464         LA_KILL_SGID = 1 << 14,
465 };
466
467 /**
468  * Layer in the layered object.
469  */
470 struct lu_object {
471         /**
472          * Header for this object.
473          */
474         struct lu_object_header           *lo_header;
475         /**
476          * Device for this layer.
477          */
478         struct lu_device                  *lo_dev;
479         /**
480          * Operations for this object.
481          */
482         const struct lu_object_operations *lo_ops;
483         /**
484          * Linkage into list of all layers.
485          */
486         cfs_list_t                         lo_linkage;
487         /**
488          * Depth. Top level layer depth is 0.
489          */
490         int                                lo_depth;
491         /**
492          * Flags from enum lu_object_flags.
493          */
494         unsigned long                      lo_flags;
495         /**
496          * Link to the device, for debugging.
497          */
498         struct lu_ref_link                *lo_dev_ref;
499 };
500
501 enum lu_object_header_flags {
502         /**
503          * Don't keep this object in cache. Object will be destroyed as soon
504          * as last reference to it is released. This flag cannot be cleared
505          * once set.
506          */
507         LU_OBJECT_HEARD_BANSHEE = 0
508 };
509
510 enum lu_object_header_attr {
511         LOHA_EXISTS   = 1 << 0,
512         LOHA_REMOTE   = 1 << 1,
513         /**
514          * UNIX file type is stored in S_IFMT bits.
515          */
516         LOHA_FT_START = 001 << 12, /**< S_IFIFO */
517         LOHA_FT_END   = 017 << 12, /**< S_IFMT */
518 };
519
520 /**
521  * "Compound" object, consisting of multiple layers.
522  *
523  * Compound object with given fid is unique with given lu_site.
524  *
525  * Note, that object does *not* necessary correspond to the real object in the
526  * persistent storage: object is an anchor for locking and method calling, so
527  * it is created for things like not-yet-existing child created by mkdir or
528  * create calls. lu_object_operations::loo_exists() can be used to check
529  * whether object is backed by persistent storage entity.
530  */
531 struct lu_object_header {
532         /**
533          * Object flags from enum lu_object_header_flags. Set and checked
534          * atomically.
535          */
536         unsigned long          loh_flags;
537         /**
538          * Object reference count. Protected by lu_site::ls_guard.
539          */
540         cfs_atomic_t           loh_ref;
541         /**
542          * Fid, uniquely identifying this object.
543          */
544         struct lu_fid          loh_fid;
545         /**
546          * Common object attributes, cached for efficiency. From enum
547          * lu_object_header_attr.
548          */
549         __u32                  loh_attr;
550         /**
551          * Linkage into per-site hash table. Protected by lu_site::ls_guard.
552          */
553         cfs_hlist_node_t       loh_hash;
554         /**
555          * Linkage into per-site LRU list. Protected by lu_site::ls_guard.
556          */
557         cfs_list_t             loh_lru;
558         /**
559          * Linkage into list of layers. Never modified once set (except lately
560          * during object destruction). No locking is necessary.
561          */
562         cfs_list_t             loh_layers;
563         /**
564          * A list of references to this object, for debugging.
565          */
566         struct lu_ref          loh_reference;
567 };
568
569 struct fld;
570
571 struct lu_site_bkt_data {
572         /**
573          * number of busy object on this bucket
574          */
575         long                      lsb_busy;
576         /**
577          * LRU list, updated on each access to object. Protected by
578          * bucket lock of lu_site::ls_obj_hash.
579          *
580          * "Cold" end of LRU is lu_site::ls_lru.next. Accessed object are
581          * moved to the lu_site::ls_lru.prev (this is due to the non-existence
582          * of list_for_each_entry_safe_reverse()).
583          */
584         cfs_list_t                lsb_lru;
585         /**
586          * Wait-queue signaled when an object in this site is ultimately
587          * destroyed (lu_object_free()). It is used by lu_object_find() to
588          * wait before re-trying when object in the process of destruction is
589          * found in the hash table.
590          *
591          * \see htable_lookup().
592          */
593         cfs_waitq_t               lsb_marche_funebre;
594 };
595
596 enum {
597         LU_SS_CREATED         = 0,
598         LU_SS_CACHE_HIT,
599         LU_SS_CACHE_MISS,
600         LU_SS_CACHE_RACE,
601         LU_SS_CACHE_DEATH_RACE,
602         LU_SS_LRU_PURGED,
603         LU_SS_LAST_STAT
604 };
605
606 /**
607  * lu_site is a "compartment" within which objects are unique, and LRU
608  * discipline is maintained.
609  *
610  * lu_site exists so that multiple layered stacks can co-exist in the same
611  * address space.
612  *
613  * lu_site has the same relation to lu_device as lu_object_header to
614  * lu_object.
615  */
616 struct lu_site {
617         /**
618          * objects hash table
619          */
620         cfs_hash_t               *ls_obj_hash;
621         /**
622          * index of bucket on hash table while purging
623          */
624         int                       ls_purge_start;
625         /**
626          * Top-level device for this stack.
627          */
628         struct lu_device         *ls_top_dev;
629         /**
630          * Linkage into global list of sites.
631          */
632         cfs_list_t                ls_linkage;
633         /**
634          * lu_site stats
635          */
636         struct lprocfs_stats     *ls_stats;
637         struct lprocfs_stats     *ls_time_stats;
638 };
639
640 static inline struct lu_site_bkt_data *
641 lu_site_bkt_from_fid(struct lu_site *site, struct lu_fid *fid)
642 {
643         cfs_hash_bd_t bd;
644
645         cfs_hash_bd_get(site->ls_obj_hash, fid, &bd);
646         return cfs_hash_bd_extra_get(site->ls_obj_hash, &bd);
647 }
648
649 /** \name ctors
650  * Constructors/destructors.
651  * @{
652  */
653
654 int  lu_site_init         (struct lu_site *s, struct lu_device *d);
655 void lu_site_fini         (struct lu_site *s);
656 int  lu_site_init_finish  (struct lu_site *s);
657 void lu_stack_fini        (const struct lu_env *env, struct lu_device *top);
658 void lu_device_get        (struct lu_device *d);
659 void lu_device_put        (struct lu_device *d);
660 int  lu_device_init       (struct lu_device *d, struct lu_device_type *t);
661 void lu_device_fini       (struct lu_device *d);
662 int  lu_object_header_init(struct lu_object_header *h);
663 void lu_object_header_fini(struct lu_object_header *h);
664 int  lu_object_init       (struct lu_object *o,
665                            struct lu_object_header *h, struct lu_device *d);
666 void lu_object_fini       (struct lu_object *o);
667 void lu_object_add_top    (struct lu_object_header *h, struct lu_object *o);
668 void lu_object_add        (struct lu_object *before, struct lu_object *o);
669
670 /**
671  * Helpers to initialize and finalize device types.
672  */
673
674 int  lu_device_type_init(struct lu_device_type *ldt);
675 void lu_device_type_fini(struct lu_device_type *ldt);
676 void lu_types_stop(void);
677
678 /** @} ctors */
679
680 /** \name caching
681  * Caching and reference counting.
682  * @{
683  */
684
685 /**
686  * Acquire additional reference to the given object. This function is used to
687  * attain additional reference. To acquire initial reference use
688  * lu_object_find().
689  */
690 static inline void lu_object_get(struct lu_object *o)
691 {
692         LASSERT(cfs_atomic_read(&o->lo_header->loh_ref) > 0);
693         cfs_atomic_inc(&o->lo_header->loh_ref);
694 }
695
696 /**
697  * Return true of object will not be cached after last reference to it is
698  * released.
699  */
700 static inline int lu_object_is_dying(const struct lu_object_header *h)
701 {
702         return cfs_test_bit(LU_OBJECT_HEARD_BANSHEE, &h->loh_flags);
703 }
704
705 void lu_object_put(const struct lu_env *env, struct lu_object *o);
706
707 int lu_site_purge(const struct lu_env *env, struct lu_site *s, int nr);
708
709 void lu_site_print(const struct lu_env *env, struct lu_site *s, void *cookie,
710                    lu_printer_t printer);
711 struct lu_object *lu_object_find(const struct lu_env *env,
712                                  struct lu_device *dev, const struct lu_fid *f,
713                                  const struct lu_object_conf *conf);
714 struct lu_object *lu_object_find_at(const struct lu_env *env,
715                                     struct lu_device *dev,
716                                     const struct lu_fid *f,
717                                     const struct lu_object_conf *conf);
718 struct lu_object *lu_object_find_slice(const struct lu_env *env,
719                                        struct lu_device *dev,
720                                        const struct lu_fid *f,
721                                        const struct lu_object_conf *conf);
722 /** @} caching */
723
724 /** \name helpers
725  * Helpers.
726  * @{
727  */
728
729 /**
730  * First (topmost) sub-object of given compound object
731  */
732 static inline struct lu_object *lu_object_top(struct lu_object_header *h)
733 {
734         LASSERT(!cfs_list_empty(&h->loh_layers));
735         return container_of0(h->loh_layers.next, struct lu_object, lo_linkage);
736 }
737
738 /**
739  * Next sub-object in the layering
740  */
741 static inline struct lu_object *lu_object_next(const struct lu_object *o)
742 {
743         return container_of0(o->lo_linkage.next, struct lu_object, lo_linkage);
744 }
745
746 /**
747  * Pointer to the fid of this object.
748  */
749 static inline const struct lu_fid *lu_object_fid(const struct lu_object *o)
750 {
751         return &o->lo_header->loh_fid;
752 }
753
754 /**
755  * return device operations vector for this object
756  */
757 static const inline struct lu_device_operations *
758 lu_object_ops(const struct lu_object *o)
759 {
760         return o->lo_dev->ld_ops;
761 }
762
763 /**
764  * Given a compound object, find its slice, corresponding to the device type
765  * \a dtype.
766  */
767 struct lu_object *lu_object_locate(struct lu_object_header *h,
768                                    const struct lu_device_type *dtype);
769
770 struct lu_cdebug_print_info {
771         int         lpi_subsys;
772         int         lpi_mask;
773         const char *lpi_file;
774         const char *lpi_fn;
775         int         lpi_line;
776 };
777
778 /**
779  * Printer function emitting messages through libcfs_debug_msg().
780  */
781 int lu_cdebug_printer(const struct lu_env *env,
782                       void *cookie, const char *format, ...);
783
784 #define DECLARE_LU_CDEBUG_PRINT_INFO(var, mask) \
785         struct lu_cdebug_print_info var = {     \
786                 .lpi_subsys = DEBUG_SUBSYSTEM,  \
787                 .lpi_mask   = (mask),           \
788                 .lpi_file   = __FILE__,         \
789                 .lpi_fn     = __FUNCTION__,     \
790                 .lpi_line   = __LINE__          \
791         }
792
793 /**
794  * Print object description followed by a user-supplied message.
795  */
796 #define LU_OBJECT_DEBUG(mask, env, object, format, ...)                 \
797 do {                                                                    \
798         static DECLARE_LU_CDEBUG_PRINT_INFO(__info, mask);              \
799                                                                         \
800         if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) {                   \
801                 lu_object_print(env, &__info, lu_cdebug_printer, object); \
802                 CDEBUG(mask, format , ## __VA_ARGS__);                  \
803         }                                                               \
804 } while (0)
805
806 /**
807  * Print short object description followed by a user-supplied message.
808  */
809 #define LU_OBJECT_HEADER(mask, env, object, format, ...)                \
810 do {                                                                    \
811         static DECLARE_LU_CDEBUG_PRINT_INFO(__info, mask);              \
812                                                                         \
813         if (cfs_cdebug_show(mask, DEBUG_SUBSYSTEM)) {                   \
814                 lu_object_header_print(env, &__info, lu_cdebug_printer, \
815                                        (object)->lo_header);            \
816                 lu_cdebug_printer(env, &__info, "\n");                  \
817                 CDEBUG(mask, format , ## __VA_ARGS__);                  \
818         }                                                               \
819 } while (0)
820
821 void lu_object_print       (const struct lu_env *env, void *cookie,
822                             lu_printer_t printer, const struct lu_object *o);
823 void lu_object_header_print(const struct lu_env *env, void *cookie,
824                             lu_printer_t printer,
825                             const struct lu_object_header *hdr);
826
827 /**
828  * Check object consistency.
829  */
830 int lu_object_invariant(const struct lu_object *o);
831
832
833 /**
834  * \retval  1 iff object \a o exists on stable storage,
835  * \retval  0 iff object \a o not exists on stable storage.
836  * \retval -1 iff object \a o is on remote server.
837  */
838 static inline int lu_object_exists(const struct lu_object *o)
839 {
840         __u32 attr;
841
842         attr = o->lo_header->loh_attr;
843         if (attr & LOHA_REMOTE)
844                 return -1;
845         else if (attr & LOHA_EXISTS)
846                 return +1;
847         else
848                 return 0;
849 }
850
851 static inline int lu_object_assert_exists(const struct lu_object *o)
852 {
853         return lu_object_exists(o) != 0;
854 }
855
856 static inline int lu_object_assert_not_exists(const struct lu_object *o)
857 {
858         return lu_object_exists(o) <= 0;
859 }
860
861 /**
862  * Attr of this object.
863  */
864 static inline __u32 lu_object_attr(const struct lu_object *o)
865 {
866         LASSERT(lu_object_exists(o) > 0);
867         return o->lo_header->loh_attr;
868 }
869
870 static inline struct lu_ref_link *lu_object_ref_add(struct lu_object *o,
871                                                     const char *scope,
872                                                     const void *source)
873 {
874         return lu_ref_add(&o->lo_header->loh_reference, scope, source);
875 }
876
877 static inline void lu_object_ref_del(struct lu_object *o,
878                                      const char *scope, const void *source)
879 {
880         lu_ref_del(&o->lo_header->loh_reference, scope, source);
881 }
882
883 static inline void lu_object_ref_del_at(struct lu_object *o,
884                                         struct lu_ref_link *link,
885                                         const char *scope, const void *source)
886 {
887         lu_ref_del_at(&o->lo_header->loh_reference, link, scope, source);
888 }
889
890 /** input params, should be filled out by mdt */
891 struct lu_rdpg {
892         /** hash */
893         __u64                   rp_hash;
894         /** count in bytes */
895         unsigned int            rp_count;
896         /** number of pages */
897         unsigned int            rp_npages;
898         /** requested attr */
899         __u32                   rp_attrs;
900         /** pointers to pages */
901         struct page           **rp_pages;
902 };
903
904 enum lu_xattr_flags {
905         LU_XATTR_REPLACE = (1 << 0),
906         LU_XATTR_CREATE  = (1 << 1)
907 };
908
909 /** @} helpers */
910
911 /** \name lu_context
912  * @{ */
913
914 /** For lu_context health-checks */
915 enum lu_context_state {
916         LCS_INITIALIZED = 1,
917         LCS_ENTERED,
918         LCS_LEFT,
919         LCS_FINALIZED
920 };
921
922 /**
923  * lu_context. Execution context for lu_object methods. Currently associated
924  * with thread.
925  *
926  * All lu_object methods, except device and device type methods (called during
927  * system initialization and shutdown) are executed "within" some
928  * lu_context. This means, that pointer to some "current" lu_context is passed
929  * as an argument to all methods.
930  *
931  * All service ptlrpc threads create lu_context as part of their
932  * initialization. It is possible to create "stand-alone" context for other
933  * execution environments (like system calls).
934  *
935  * lu_object methods mainly use lu_context through lu_context_key interface
936  * that allows each layer to associate arbitrary pieces of data with each
937  * context (see pthread_key_create(3) for similar interface).
938  *
939  * On a client, lu_context is bound to a thread, see cl_env_get().
940  *
941  * \see lu_context_key
942  */
943 struct lu_context {
944         /**
945          * lu_context is used on the client side too. Yet we don't want to
946          * allocate values of server-side keys for the client contexts and
947          * vice versa.
948          *
949          * To achieve this, set of tags in introduced. Contexts and keys are
950          * marked with tags. Key value are created only for context whose set
951          * of tags has non-empty intersection with one for key. Tags are taken
952          * from enum lu_context_tag.
953          */
954         __u32                  lc_tags;
955         /**
956          * Pointer to the home service thread. NULL for other execution
957          * contexts.
958          */
959         struct ptlrpc_thread  *lc_thread;
960         /**
961          * Pointer to an array with key values. Internal implementation
962          * detail.
963          */
964         void                 **lc_value;
965         enum lu_context_state  lc_state;
966         /**
967          * Linkage into a list of all remembered contexts. Only
968          * `non-transient' contexts, i.e., ones created for service threads
969          * are placed here.
970          */
971         cfs_list_t             lc_remember;
972         /**
973          * Version counter used to skip calls to lu_context_refill() when no
974          * keys were registered.
975          */
976         unsigned               lc_version;
977         /**
978          * Debugging cookie.
979          */
980         unsigned               lc_cookie;
981 };
982
983 /**
984  * lu_context_key interface. Similar to pthread_key.
985  */
986
987 enum lu_context_tag {
988         /**
989          * Thread on md server
990          */
991         LCT_MD_THREAD = 1 << 0,
992         /**
993          * Thread on dt server
994          */
995         LCT_DT_THREAD = 1 << 1,
996         /**
997          * Context for transaction handle
998          */
999         LCT_TX_HANDLE = 1 << 2,
1000         /**
1001          * Thread on client
1002          */
1003         LCT_CL_THREAD = 1 << 3,
1004         /**
1005          * A per-request session on a server, and a per-system-call session on
1006          * a client.
1007          */
1008         LCT_SESSION   = 1 << 4,
1009
1010         /**
1011          * Set when at least one of keys, having values in this context has
1012          * non-NULL lu_context_key::lct_exit() method. This is used to
1013          * optimize lu_context_exit() call.
1014          */
1015         LCT_HAS_EXIT  = 1 << 28,
1016         /**
1017          * Don't add references for modules creating key values in that context.
1018          * This is only for contexts used internally by lu_object framework.
1019          */
1020         LCT_NOREF     = 1 << 29,
1021         /**
1022          * Key is being prepared for retiring, don't create new values for it.
1023          */
1024         LCT_QUIESCENT = 1 << 30,
1025         /**
1026          * Context should be remembered.
1027          */
1028         LCT_REMEMBER  = 1 << 31,
1029         /**
1030          * Contexts usable in cache shrinker thread.
1031          */
1032         LCT_SHRINKER  = LCT_MD_THREAD|LCT_DT_THREAD|LCT_CL_THREAD|LCT_NOREF
1033 };
1034
1035 /**
1036  * Key. Represents per-context value slot.
1037  *
1038  * Keys are usually registered when module owning the key is initialized, and
1039  * de-registered when module is unloaded. Once key is registered, all new
1040  * contexts with matching tags, will get key value. "Old" contexts, already
1041  * initialized at the time of key registration, can be forced to get key value
1042  * by calling lu_context_refill().
1043  *
1044  * Every key value is counted in lu_context_key::lct_used and acquires a
1045  * reference on an owning module. This means, that all key values have to be
1046  * destroyed before module can be unloaded. This is usually achieved by
1047  * stopping threads started by the module, that created contexts in their
1048  * entry functions. Situation is complicated by the threads shared by multiple
1049  * modules, like ptlrpcd daemon on a client. To work around this problem,
1050  * contexts, created in such threads, are `remembered' (see
1051  * LCT_REMEMBER)---i.e., added into a global list. When module is preparing
1052  * for unloading it does the following:
1053  *
1054  *     - marks its keys as `quiescent' (lu_context_tag::LCT_QUIESCENT)
1055  *       preventing new key values from being allocated in the new contexts,
1056  *       and
1057  *
1058  *     - scans a list of remembered contexts, destroying values of module
1059  *       keys, thus releasing references to the module.
1060  *
1061  * This is done by lu_context_key_quiesce(). If module is re-activated
1062  * before key has been de-registered, lu_context_key_revive() call clears
1063  * `quiescent' marker.
1064  *
1065  * lu_context code doesn't provide any internal synchronization for these
1066  * activities---it's assumed that startup (including threads start-up) and
1067  * shutdown are serialized by some external means.
1068  *
1069  * \see lu_context
1070  */
1071 struct lu_context_key {
1072         /**
1073          * Set of tags for which values of this key are to be instantiated.
1074          */
1075         __u32 lct_tags;
1076         /**
1077          * Value constructor. This is called when new value is created for a
1078          * context. Returns pointer to new value of error pointer.
1079          */
1080         void  *(*lct_init)(const struct lu_context *ctx,
1081                            struct lu_context_key *key);
1082         /**
1083          * Value destructor. Called when context with previously allocated
1084          * value of this slot is destroyed. \a data is a value that was returned
1085          * by a matching call to lu_context_key::lct_init().
1086          */
1087         void   (*lct_fini)(const struct lu_context *ctx,
1088                            struct lu_context_key *key, void *data);
1089         /**
1090          * Optional method called on lu_context_exit() for all allocated
1091          * keys. Can be used by debugging code checking that locks are
1092          * released, etc.
1093          */
1094         void   (*lct_exit)(const struct lu_context *ctx,
1095                            struct lu_context_key *key, void *data);
1096         /**
1097          * Internal implementation detail: index within lu_context::lc_value[]
1098          * reserved for this key.
1099          */
1100         int      lct_index;
1101         /**
1102          * Internal implementation detail: number of values created for this
1103          * key.
1104          */
1105         cfs_atomic_t lct_used;
1106         /**
1107          * Internal implementation detail: module for this key.
1108          */
1109         cfs_module_t *lct_owner;
1110         /**
1111          * References to this key. For debugging.
1112          */
1113         struct lu_ref  lct_reference;
1114 };
1115
1116 #define LU_KEY_INIT(mod, type)                                    \
1117         static void* mod##_key_init(const struct lu_context *ctx, \
1118                                     struct lu_context_key *key)   \
1119         {                                                         \
1120                 type *value;                                      \
1121                                                                   \
1122                 CLASSERT(CFS_PAGE_SIZE >= sizeof (*value));       \
1123                                                                   \
1124                 OBD_ALLOC_PTR(value);                             \
1125                 if (value == NULL)                                \
1126                         value = ERR_PTR(-ENOMEM);                 \
1127                                                                   \
1128                 return value;                                     \
1129         }                                                         \
1130         struct __##mod##__dummy_init {;} /* semicolon catcher */
1131
1132 #define LU_KEY_FINI(mod, type)                                              \
1133         static void mod##_key_fini(const struct lu_context *ctx,            \
1134                                     struct lu_context_key *key, void* data) \
1135         {                                                                   \
1136                 type *info = data;                                          \
1137                                                                             \
1138                 OBD_FREE_PTR(info);                                         \
1139         }                                                                   \
1140         struct __##mod##__dummy_fini {;} /* semicolon catcher */
1141
1142 #define LU_KEY_INIT_FINI(mod, type)   \
1143         LU_KEY_INIT(mod,type);        \
1144         LU_KEY_FINI(mod,type)
1145
1146 #define LU_CONTEXT_KEY_DEFINE(mod, tags)                \
1147         struct lu_context_key mod##_thread_key = {      \
1148                 .lct_tags = tags,                       \
1149                 .lct_init = mod##_key_init,             \
1150                 .lct_fini = mod##_key_fini              \
1151         }
1152
1153 #define LU_CONTEXT_KEY_INIT(key)                        \
1154 do {                                                    \
1155         (key)->lct_owner = THIS_MODULE;                 \
1156 } while (0)
1157
1158 int   lu_context_key_register(struct lu_context_key *key);
1159 void  lu_context_key_degister(struct lu_context_key *key);
1160 void *lu_context_key_get     (const struct lu_context *ctx,
1161                                const struct lu_context_key *key);
1162 void  lu_context_key_quiesce (struct lu_context_key *key);
1163 void  lu_context_key_revive  (struct lu_context_key *key);
1164
1165
1166 /*
1167  * LU_KEY_INIT_GENERIC() has to be a macro to correctly determine an
1168  * owning module.
1169  */
1170
1171 #define LU_KEY_INIT_GENERIC(mod)                                        \
1172         static void mod##_key_init_generic(struct lu_context_key *k, ...) \
1173         {                                                               \
1174                 struct lu_context_key *key = k;                         \
1175                 va_list args;                                           \
1176                                                                         \
1177                 va_start(args, k);                                      \
1178                 do {                                                    \
1179                         LU_CONTEXT_KEY_INIT(key);                       \
1180                         key = va_arg(args, struct lu_context_key *);    \
1181                 } while (key != NULL);                                  \
1182                 va_end(args);                                           \
1183         }
1184
1185 #define LU_TYPE_INIT(mod, ...)                                          \
1186         LU_KEY_INIT_GENERIC(mod)                                        \
1187         static int mod##_type_init(struct lu_device_type *t)            \
1188         {                                                               \
1189                 mod##_key_init_generic(__VA_ARGS__, NULL);              \
1190                 return lu_context_key_register_many(__VA_ARGS__, NULL); \
1191         }                                                               \
1192         struct __##mod##_dummy_type_init {;}
1193
1194 #define LU_TYPE_FINI(mod, ...)                                          \
1195         static void mod##_type_fini(struct lu_device_type *t)           \
1196         {                                                               \
1197                 lu_context_key_degister_many(__VA_ARGS__, NULL);        \
1198         }                                                               \
1199         struct __##mod##_dummy_type_fini {;}
1200
1201 #define LU_TYPE_START(mod, ...)                                 \
1202         static void mod##_type_start(struct lu_device_type *t)  \
1203         {                                                       \
1204                 lu_context_key_revive_many(__VA_ARGS__, NULL);  \
1205         }                                                       \
1206         struct __##mod##_dummy_type_start {;}
1207
1208 #define LU_TYPE_STOP(mod, ...)                                  \
1209         static void mod##_type_stop(struct lu_device_type *t)   \
1210         {                                                       \
1211                 lu_context_key_quiesce_many(__VA_ARGS__, NULL); \
1212         }                                                       \
1213         struct __##mod##_dummy_type_stop {;}
1214
1215
1216
1217 #define LU_TYPE_INIT_FINI(mod, ...)             \
1218         LU_TYPE_INIT(mod, __VA_ARGS__);         \
1219         LU_TYPE_FINI(mod, __VA_ARGS__);         \
1220         LU_TYPE_START(mod, __VA_ARGS__);        \
1221         LU_TYPE_STOP(mod, __VA_ARGS__)
1222
1223 int   lu_context_init  (struct lu_context *ctx, __u32 tags);
1224 void  lu_context_fini  (struct lu_context *ctx);
1225 void  lu_context_enter (struct lu_context *ctx);
1226 void  lu_context_exit  (struct lu_context *ctx);
1227 int   lu_context_refill(struct lu_context *ctx);
1228
1229 /*
1230  * Helper functions to operate on multiple keys. These are used by the default
1231  * device type operations, defined by LU_TYPE_INIT_FINI().
1232  */
1233
1234 int  lu_context_key_register_many(struct lu_context_key *k, ...);
1235 void lu_context_key_degister_many(struct lu_context_key *k, ...);
1236 void lu_context_key_revive_many  (struct lu_context_key *k, ...);
1237 void lu_context_key_quiesce_many (struct lu_context_key *k, ...);
1238
1239 /**
1240  * Environment.
1241  */
1242 struct lu_env {
1243         /**
1244          * "Local" context, used to store data instead of stack.
1245          */
1246         struct lu_context  le_ctx;
1247         /**
1248          * "Session" context for per-request data.
1249          */
1250         struct lu_context *le_ses;
1251 };
1252
1253 int  lu_env_init  (struct lu_env *env, __u32 tags);
1254 void lu_env_fini  (struct lu_env *env);
1255 int  lu_env_refill(struct lu_env *env);
1256
1257 /** @} lu_context */
1258
1259 /**
1260  * Output site statistical counters into a buffer. Suitable for
1261  * ll_rd_*()-style functions.
1262  */
1263 int lu_site_stats_print(const struct lu_site *s, char *page, int count);
1264
1265 /**
1266  * Common name structure to be passed around for various name related methods.
1267  */
1268 struct lu_name {
1269         const char    *ln_name;
1270         int            ln_namelen;
1271 };
1272
1273 /**
1274  * Common buffer structure to be passed around for various xattr_{s,g}et()
1275  * methods.
1276  */
1277 struct lu_buf {
1278         void   *lb_buf;
1279         ssize_t lb_len;
1280 };
1281
1282 /** null buffer */
1283 extern struct lu_buf LU_BUF_NULL;
1284
1285 #define DLUBUF "(%p %z)"
1286 #define PLUBUF(buf) (buf)->lb_buf, (buf)->lb_len
1287 /**
1288  * One-time initializers, called at obdclass module initialization, not
1289  * exported.
1290  */
1291
1292 /**
1293  * Initialization of global lu_* data.
1294  */
1295 int lu_global_init(void);
1296
1297 /**
1298  * Dual to lu_global_init().
1299  */
1300 void lu_global_fini(void);
1301
1302 enum {
1303         LU_TIME_FIND_LOOKUP,
1304         LU_TIME_FIND_ALLOC,
1305         LU_TIME_FIND_INSERT,
1306         LU_TIME_NR
1307 };
1308
1309 extern const char *lu_time_names[LU_TIME_NR];
1310
1311 struct lu_kmem_descr {
1312         cfs_mem_cache_t **ckd_cache;
1313         const char       *ckd_name;
1314         const size_t      ckd_size;
1315 };
1316
1317 int  lu_kmem_init(struct lu_kmem_descr *caches);
1318 void lu_kmem_fini(struct lu_kmem_descr *caches);
1319
1320 /** @} lu */
1321 #endif /* __LUSTRE_LU_OBJECT_H */