Whamcloud - gitweb
Sohei Koyama [Sun, 8 Dec 2024 15:09:35 +0000 (00:09 +0900)]
LU-18522 utils: fix -export-dynamic flag
When compiled with clang it fails with
`unknown argument: '-export-dynamic'`.
'-export-dynamic' is supported by gcc but not by clang.
Change to '-Wl,--export-dynamic' instead, which both supports.
-Wl, specifies the flags to be passed to the linker.
Signed-off-by: Sohei Koyama <skoyama@ddn.com>
Change-Id: I35830c0fec5387d532252478a402735ba2ad2dbf
Test-Parameters: trivial
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57334
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Sohei Koyama [Fri, 6 Dec 2024 04:12:39 +0000 (13:12 +0900)]
LU-18517 quota: fix LC_HAVE_DQUOT_QC_DQBLK check
When compiling with clang, the HAVE_DQUOT_QC_DQBLK check always
fails with "error: indirection of non-volatile null pointer will
be deleted, not trap".
Signed-off-by: Sohei Koyama <skoyama@ddn.com>
Change-Id: I8cbdfd70bef8164e40d19d68dc4127c6f40bd693
Test-Parameters: trivial
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57320
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Emoly Liu [Wed, 4 Dec 2024 21:38:40 +0000 (05:38 +0800)]
LU-16318 tests: wait longer for MDT destroys to complete
Wait longer for MDT destroys to complete in replay-ost-single.sh
test_6.
Test-Parameters: trivial testlist=replay-ost-single env=ONLY=6,ONLY_REPEAT=100
Test-Parameters: trivial testlist=replay-ost-single env=ONLY=6,ONLY_REPEAT=100
Test-Parameters: trivial testlist=replay-ost-single env=ONLY=6,ONLY_REPEAT=100
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: I2668028e2ebecddb9167c4fed5963dda857446eb
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57290
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Tue, 3 Dec 2024 11:10:26 +0000 (12:10 +0100)]
LU-18497 gss: carry out creds prepare as user
Instead of forking a child process that switches to user identity to
get the credentials cache name, just carry out the whole credentials
preparation as the user, and switch back to original uid/gid in order
to proceed to ioctls, eliminating the need to map memory between
processes.
Test-Parameters: trivial
Test-Parameters: testgroup=review-dne-selinux-ssk-part-1
Test-Parameters: testgroup=review-dne-selinux-ssk-part-2
Test-Parameters: kerberos=true testlist=sanity-krb5
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I7807263d71cd3fc8a9934cc4c4da8b497b845e6f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57192
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Andreas Dilger [Thu, 28 Nov 2024 02:49:03 +0000 (19:49 -0700)]
LU-17251 tests: increase parallel-scale OST seq_width
Increase seq_width earlier in parallel-scale so that OST SEQ rollover
does not happen during later testing (in particular test_rr_alloc).
Otherwise, the OST SEQ rollover can stall OST object preallocation
during the testing and provide skewed creation rates across OSTs.
Fix parallel-scale.sh so only tests which use MPI check MPI_USER.
Test-Parameters: trivial
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Test-Parameters: testlist=parallel-scale env=ONLY=statahead+rr_alloc
Fixes:
11d55259ab ("LU-17251 tests: try to fix test_rr_alloc again")
Fixes:
66d93ce3e4 ("LU-17251 test: improve parallel-scale rr_alloc test")
Fixes:
0ecb2a167c ("LU-11912 ofd: reduce LUSTRE_DATA_SEQ_MAX_WIDTH")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I79b146fff96dcc3c607e73bbb575c526d02540e5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57181
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 3 Oct 2019 20:40:36 +0000 (14:40 -0600)]
LU-930 misc: update .mailmap to fix bad commits
Fix the .mailmap file to fix the attribution of a few commits
that used the wrong authorship.
Test-Parameters: trivial
Build-Parameters: distro=el9.3 arch=x86_64
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Idd45f46fcefa7d9aaa9e2b6a63ccaa1b233ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57008
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Colin Faber <cfaber@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Keguang Xu [Fri, 8 Nov 2024 01:35:00 +0000 (09:35 +0800)]
LU-18244 utils: add 'lfs mkdir -C -N' overstriping support
Adding support of "-N" in "lfs mkdir -C -N" which specify the
overstripe factor for each MDT. While meta-overstriping has already
been introduced (refer LU-12273), this change mainly aligns the
mkdir -C -N with the overstriping behavior OSTs.
- Util side, add range check [-5, -1] if overstriped enabled within
lfs_setdirstripe().
- Server side, in lod_object.c::lod_ah_init() where the decision of
striping configuration is made, we adjust the ldo_dir_stripe_count
value account for the specified overstripe factor.
- Macro LMV_OVERSTRIPE_COUNT_{MIN, MAX} added indicating the overstipe
count for each MDT, in -N format.
Signed-off-by: Keguang Xu <squalfof@gmail.com>
Change-Id: I99bdd543c1482798441d8753f4aeb2b7190060a8
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56925
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Wed, 30 Oct 2024 06:52:34 +0000 (02:52 -0400)]
LU-18420 llite: Use enum mds_ibits_locks instead of __u64
This patch uses enum mds_ibits_locks instead of generic
__u64. This patch has no functional changes.
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I2d9ad5001977a532f2d7c3242ce2e40f38974c5e
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56877
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Fri, 25 Oct 2024 19:20:16 +0000 (13:20 -0600)]
LU-8066 mdc: migrate simple proc entries to sysfs
Two simple proc entries dom_min_repsize and lsom can be moved
to sys/fs.
Change-Id: Ieb8af26b1936b8b3579ceb6bcc113c56444eec45
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56849
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Keguang Xu [Tue, 15 Oct 2024 06:28:58 +0000 (14:28 +0800)]
LU-17309 llog: set timestamp on llog objects at creation time
To facilitate debugging, this commit introduces the storage of the
creation time (ctime) for llog objects upon creation. Additionally,
the modification time (mtime) will be updated when the catalog is
modified.
- For llog creation, la_ctime/mtime/atime are set within
llog_osd_create().
- For update, there are 2 entries leading to the modification of
llog: 1) direct usage over plain-log?, dt_attr_set() is added with
la_mtime set in llog.c; 2) update through catalog, dt_attr_set() is
added in llog_cat.c
Performance Considerations:
- Catalog modifications are infrequent, minimizing the performance
impact.
- Updating the mtime incurs no additional overhead when new records
are added to an llog file, as the new inode size/ blocks must be
written regardless.
Signed-off-by: Keguang Xu <squalfof@gmail.com>
Change-Id: I13c260cc576e35a811a9d33cacfdd0bdf8492962
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56691
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Mon, 14 Oct 2024 15:31:34 +0000 (11:31 -0400)]
LU-8066 sysfs: migrate checksum_type to sys/fs tree
The checksum_type file is simple so the logical place is sys/fs
which is accessible to everyone. This more complex file is
one of thew few allowed in the general sysfs tree.
Change-Id: I6ce89416ef64058f911e18a3f743944f0a6a8f4e
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56667
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Fri, 11 Oct 2024 18:22:23 +0000 (14:22 -0400)]
LU-8066 sysfs: migrate pinger_recov to sys/fs tree
The pinger_recov file is simple so the logical place is sys/fs
which is accessible to everyone.
Change-Id: I1117c4bd54aa4941f3ff66acfca422cc83a54088
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56666
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Fri, 11 Oct 2024 14:24:00 +0000 (08:24 -0600)]
LU-8066 sysfs: migrate max_pages_per_rpc to sysfs tree
Both the osc and mdc layer place max_pages_per_rpc in the proc
tree. We can move it to the sysfs tree. This is a simple sysfs
file so no root only issues for this tunable.
Change-Id: Ib4c9bd5e3b6a56c489149779208a1461692538ac
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56665
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Fri, 6 Dec 2024 00:11:50 +0000 (07:11 +0700)]
LU-18351 obdclass: jobstat scaling
When there is a large number of jobstats (>100k) list walking in
seq_write does not scale and can trigger cpus soft lock-ups.
Prefer red black trees for easier lookup, removal and simplified
tree walk during seq_write()
Add an rbtree with a generated sequential id as jobs are added
to simplify iteration with restarts. The larger the amount of
data being written via seq_write() the more likely and frequent
a restart is needed to seek to new position which can be done
quickly with an rbtree.
Add an lru list to so periodic trim of jobs does not need to
walk the entire tree of jobs.
Unpatched:
jobs 50000 100000 200000 350000 500000
time 2.096s 3.672s 7.504s 11.875s 16.721s
Patched:
jobs 50000 100000 200000 350000 500000
time 1.366s 3.296s 6.763s 8.895s 11.965s
HPE-bug-id: LUS-12621
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Icca1365af5db761ed89ee9a8a97ce4ded65b8832
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56607
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Mon, 7 Oct 2024 11:48:28 +0000 (07:48 -0400)]
LU-18337 tests: Fix racer division by 0 error message
'file' under file_create.sh is set as /mnt/lustre/racer/M/N
Currently M/N is used directly as mathematical operation
to determine whether "--block" (default) is to be passed as
option to 'migrate'. This was causing the divide by zero error
when N is 0. This patch changes 'file' to use only the last
part (ie N) instead of M/N when doing the mod by 8 operation.
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I590250afb69607d906cf3f8422ca4bc97600eabb
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56598
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Elena Gryaznova [Fri, 27 Sep 2024 10:49:12 +0000 (13:49 +0300)]
LU-18274 tests: reboot the not up nodes only
It is reasonable to reboot only those nodes which are
not up after previous reboot attempt.
Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-12442
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I3e1181f10bdf8b7e74ab532bd2e77d092dcf1c9b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56515
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Yang Sheng [Mon, 23 Sep 2024 08:08:20 +0000 (16:08 +0800)]
LU-17692 llite: flock work with lockd
Change the flock to invoke lock copy API to work
with nfs server.
Fixes:
7f8af8f37e ("LU-17692 flock: get extra reference for lockd")
Signed-off-by: Yang Sheng <ys@whamcloud.com>
Change-Id: Ic5b3daf825dfa616a394c47a76f0d08e87c5bc9a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56488
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Zhenyu Xu <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Sat, 21 Sep 2024 03:29:56 +0000 (10:29 +0700)]
LU-18250 ldiskfs: refresh Ubuntu 24.04 6.8.0-45-generic
A recent kernel update needs to use newer patches from 6.10:
ext4-prealloc.patch
ext4-delayed-iput.patch
Also add a kernel patch level check for Ubuntu 6.8 in to
select pick the newer series and fix a typo in the 5.11 check
Test-Parameters: trivial
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I0fffb37fc29c1747d6aa7833111116095c55b666
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56445
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: Shuichi Ihara <sihara@ddn.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 15 Sep 2024 10:18:25 +0000 (06:18 -0400)]
LU-16796 lnet: Change struct lmv_stripe_object to use kref
This patch changes struct lmv_stripe_object to use
kref instead of atomic_t
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I7df086a23f59eb352c0f07b96e30bfdf9bc96cad
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56363
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Etienne AUJAMES [Wed, 11 Sep 2024 18:31:37 +0000 (20:31 +0200)]
LU-18163 obdclass: add sysfs_memparse_total() string helper
Add sysfs_memparse_total() to parse '%' unit. The size returned is
computed based on a total size argument.
If the parsed size exceeds the total value (> 100% of total size),
the function returns -ERANGE.
The following string format are accepted: "1.0%", "0.1%", ".1%"
It adds some unit tests for sysfs_memparse_total()
in obd_init_checks().
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: Ic9390f2dbb64f0c2ca8756e78ba4100346e08f3f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56334
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sat, 24 Aug 2024 07:08:10 +0000 (03:08 -0400)]
LU-16796 lnet: Change struct lnet_ping_buffer to use kref
This patch changes struct lnet_ping_buffer to use
kref instead of atomic_t
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Ic180e576c3b11afec687dcb3b55b857c730598f6
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56177
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Sat, 31 Aug 2024 03:40:43 +0000 (10:40 +0700)]
LU-17000 mdt: symbolic link integer overflow
CoverityID: 442376 ("Integer overflow")
Use ssize_t to avoid narrowing
CoverityID: 442114 ("Integer handling issues")
mdt_getattr_internal() a theoretical underflow when subtracting
from an unsigned int that could be 0
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I560c9cbcbfed907725b101ca90661fe8d0d6cf45
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56151
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Arshad Hussain [Fri, 23 Aug 2024 18:13:18 +0000 (14:13 -0400)]
LU-16796 lnet: Change struct srpc_client_rpc to use kref
This patch changes struct lov_stripe_md to use
kref instead of atomic_t
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I7dafb469aa6ad95e810f895654588a9a2114c7c6
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56142
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Fri, 23 Aug 2024 19:02:26 +0000 (15:02 -0400)]
LU-16796 lfsck: Change struct lfsck_tgt_desc to use kref
This patch changes struct lfsck_tgt_desc to use
kref instead of atomic_t
Test-Parameters: trivial testlist=sanity-lfsck
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I1f9bf1889fcc6f0a4b4050c1a2be98476c5254dd
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56141
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Fri, 23 Aug 2024 14:09:41 +0000 (10:09 -0400)]
LU-16796 lov: Change struct lov_stripe_md to use kref
This patch changes struct lov_stripe_md to use
kref instead of atomic_t
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I8c743d630c268a70ecd0d5c9907e2ce456cd60cc
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56104
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Mon, 25 Nov 2024 11:39:23 +0000 (18:39 +0700)]
LU-18486 build: fl_flags removed in 6.8
Linux commit v6.7-rc4-79-gaf7628d6ec19
fs: convert error_remove_page to error_remove_folio
Provide an abstraction for fl_flags and c.flc_flags
Make mdt_dom_fiemap a static function.
Test-Parameters: trivial
Fixes:
3177b0dc5d1 ("LU-2525 ldlm: add asynchronous flocks")
Fixes:
5921e1571f2 ("LU-14510 dom: fiemap support for DoM files")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Icb659a8ab19c00454391cbb7df31c2bb7f9a85c4
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57123
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Shuichi Ihara <sihara@ddn.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Thu, 14 Dec 2023 06:28:30 +0000 (11:58 +0530)]
LU-16796 lnet: Change struct lnet_delay_rule to use kref
This patch changes struct lnet_delay_rule to use
kref instead of atomic_t
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I58bf5a27d779e20bc4734765980e83675ea53633
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53457
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Zarochentsev [Mon, 2 Dec 2024 16:47:57 +0000 (16:47 +0000)]
LU-17810 dne: dir restripe without fixed hash flag
Add an option to clear LMV_HASH_FIXED_FLAG
in dir re-striping, this restores an ability to convert a
striped dir with only one stripe into a plain dir.
HPE-bug-id: LUS-12321
Fixes:
4c2514f483 ("LU-14459 mdt: support fixed directory layout")
Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: I7c119f435b19a446cb960cdc5a8ebec7e00ab0dc
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57117
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Alexander Boyko [Wed, 6 Nov 2024 03:20:36 +0000 (22:20 -0500)]
LU-18463 ptlrpc: removing cfs_flush_fput idle
mdtest performance degradations were observed for directory removes
of up to 28%. The cause is LU-16973.
The fix removes flushing from a ptlrpc path, and introduce a
work for osd ldiskfs. Let's flush files base on count. Also it
adds the sysfs file to set a descriptors count for flushing.
By default 5k files.
echo 1000 > /sys/fs/lustre/osd-ldiskfs/flush_descriptors_cnt
cat /sys/fs/lustre/osd-ldiskfs/flush_descriptors_cnt
1000
mdtest results with this patch (5 iterations Mean op/s)
base with a fix
MDT0
Directory creation 120447 111808
Directory stat 394309 388488
Directory removal 123516 169907
MDT1
Directory creation 123997 121788
Directory stat 403213 395777
Directory removal 116210 160593
HPE-bug-id: LUS-12373
Fixes:
2feb4a7bb0 ("LU-16973 ptlrpc: flush delayed file desc if idle")
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I26c73f09f7c8045a26a7876317e07b4cd28bcee3
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57073
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 22 Sep 2024 14:08:30 +0000 (10:08 -0400)]
LU-6142 mdd: Fix style issues for md_object.h
This patch fixes issues reported by checkpatch
for both files lustre/include/md_object.h
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Id28dc3451cb3c79335684b5aa2dd5f821eba4f36
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56478
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 22 Sep 2024 14:04:48 +0000 (10:04 -0400)]
LU-6142 uapi: Fix style issues for lustre_user.h
This patch fixes issues reported by checkpatch
for both files lustre/include/uapi/linux/lustre/lustre_user.h
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I046ba401498c99e72915e504c715987fbf4267e7
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56477
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 22 Sep 2024 10:12:47 +0000 (06:12 -0400)]
LU-6142 gss: Fix style issues for lsupport.c
This patch fixes issues reported by checkpatch
for both files lustre/utils/gss/lsupport.c
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I1953e34226526ecde8129d419ee20dce0c9d3f15
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56455
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 8 Sep 2024 16:31:57 +0000 (12:31 -0400)]
LU-6142 lnet: Fix style issues for list.h
This patch fixes issues reported by checkpatch
for both files libcfs/include/libcfs/util/list.h
Update inline doc to kernel-doc style
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Ic8bef64aa24d079b2242ec9ac63ee7b38726f714
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56306
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 8 Sep 2024 14:56:51 +0000 (10:56 -0400)]
LU-6142 libcfs: Fix style issues for libcfs_hash.h
This patch fixes issues reported by checkpatch
for file libcfs/include/libcfs/libcfs_hash.h
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I0826a6ea530b2e8547d52c4123455b6da3d02b46
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56302
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sat, 7 Sep 2024 13:02:36 +0000 (09:02 -0400)]
LU-6142 misc: Fix style issues for lustre_req_layout.h
This patch fixes issues reported by checkpatch
for file lustre/include/lustre_req_layout.h
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I7b2595244f8c4cf3a90a28d447612fe9ea9df6f5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56301
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Fri, 6 Sep 2024 15:33:41 +0000 (11:33 -0400)]
LU-6142 obd: Fix style issues for obd.h
This patch fixes issues reported by checkpatch
for file lustre/include/obd.h
Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I98b0f4e3b5849d2c917c6236948770c94a497c41
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56299
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Wed, 11 Sep 2024 16:42:24 +0000 (10:42 -0600)]
LU-14288 nodemap: Use nidmasks for IPv6 NIDs
Using nidmasks for nodemap ranges allows us to specify more than one
IPv6 NID in a range. In range_create(), we construct a string
representing a nidmask based on the specified NID and netmask. This
is passed to cfs_parse_nidlist(), and the resulting nidlist is stored
in lu_nid_range::rn_nidlist. cfs_match_nid() is used in range_find()
and range_search() to locate appropriate ranges.
Test-Parameters: trivial
Test-Parameters: testlist=sanity-sec env=FORCE_LARGE_NID=true,LOAD_MODULES_REMOTE=true
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Ib1f60eda6fbc9d0214b6c63dcc8656eab3977a8b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56184
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Patrick Farrell [Fri, 29 Nov 2024 22:27:04 +0000 (17:27 -0500)]
LU-18500 mdc: rename mdc_get_unused
It doesn't 'get' unused - it cancels them.
Actually, it cancels unused conflicting locks, but that
made the name too long and hopefully it's clear from the
signature.
Test-Parameters: trivial
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I3f01f79a63069dfb019667ff4ca0d427e1699511
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57200
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Tue, 26 Nov 2024 08:07:48 +0000 (16:07 +0800)]
LU-18488 utils: make lrc_synced usage intuitive
llapi_resync_comp::lrc_synced is used against intuitiveness in the
mirror resync code, this patch corrects it.
Test-Parameters: testlist=sanity-flr,sanity-pfl,sanity-flr
Test-Parameters: testlist=sanity-pfl,sanity-flr,sanity-pfl
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I844dd3019b32b2a3746eb3b5b14c498ad7455270
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57137
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sergey Cheremencev [Wed, 20 Nov 2024 17:08:15 +0000 (20:08 +0300)]
LU-12706 tests: sanity-quota_4a fix
Don't set force_sync for OST0000 as we are
checking inode limit that is not affected
by the OST usage. Forced sync at OST0000
might take some time to be finished and break
the logic of a test case.
Createmany creates files in a directory on MDT0,
so don't sync all mdts, only MDT0.
Test-Parameters: testlist=sanity-quota env=ONLY=4a,ONLY_REPEAT=200
Fixes:
b86c88383f ("LU-12706 tests: sanity-quota 4a sync timeout fix")
Signed-off-by: Sergey Cheremencev <scherementsev@ddn.com>
Change-Id: If411429d8a1e968ebd554242db4b47b0c9421bf6
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57088
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Fri, 8 Nov 2024 23:35:55 +0000 (16:35 -0700)]
LU-17165 tests: stable count in recovery-small/141
The lock cancellation and fetching the lock count on the OST
is racy and can randomly be "0" or "23" either before or after
the OST is restarted. Wait until the count has stabilized to
ensure the test can pass consistently.
Test-Parameters: trivial testlist=recovery-small
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ib6d6fdeb721d6ff85a366e58c621ed7b883ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56945
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Etienne AUJAMES [Fri, 8 Nov 2024 15:47:12 +0000 (16:47 +0100)]
LU-17792 tests: fix replay-single 135 "not in REPLAY_LOCKS"
Fix test replay-single 135:
Error: 'import is not in REPLAY_LOCKS state
Wrong OST was selected for object creation due to ZFS replay-barrier:
it set the OSD to read-only and then the MDT QOS discard it.
Test-Parameters: trivial
Test-Parameters: fstype=zfs testlist=replay-single
Test-Parameters: fstype=zfs testlist=replay-single
Test-Parameters: fstype=ldiskfs testlist=replay-single
Test-Parameters: fstype=ldiskfs testlist=replay-single
Test-Parameters: fstype=zfs testlist=replay-single env=ONLY=135,ONLY_REPEAT=150
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: Ia5e1049c1fb75d99f669e38b2ac55ea6de116ddd
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56935
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Fri, 8 Nov 2024 10:42:01 +0000 (17:42 +0700)]
LU-18433 llite: remove unused ci_target_is_zfs check
The check is not longer used and can safely removed.
HPE-bug-id: LUS-12597
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: If3cb2a11b773f19f53de905be84ad32a92bb47c9
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56932
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Tue, 5 Nov 2024 21:01:14 +0000 (14:01 -0700)]
LU-17471 osd-ldiskfs: brw_stats symlink module option
Add a module option to symlink /proc/fs/lustre/osd-*/*/brw_stats
to /sys/kernel/debug/*/*/brw_stats for backward compatibility
for systems that need this for monitoring tools that depend on the
old /proc pathname instead of always creating it at startup.
Otherwise, "lctl get_param osd-ldiskfs.*.brw_stats" will display
the stats for both the original and symlinked parameter file,
which can confuse other monitoring tools.
To enable the /proc/.../brw_stats symlink, add the following line
into /etc/modprobe.d/lustre.conf before loading modules/mounting:
options osd_ldiskfs symlink_brw_stats=1
By default the symlink is not created, since newer tools should
be using the /sys/kernel/debug/.../brw_stats parameter file.
Remove sanity test_0f that is verifying the old parameter path,
since it is just too messy to get the interoperability correct.
Test-Parameters: trivial
Fixes:
47ccacd58d ("LU-17471 osd: add symlink for brw_stats")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ib61630cf2bc89b84af438c811754a85e403ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56917
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Emoly Liu <emoly@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Thu, 7 Nov 2024 17:00:46 +0000 (01:00 +0800)]
LU-13305 osc: rid of an invalid assertion
When osc_cache_truncate_start() race with ldlm lock blocking ast,
they would access the same extent, and the ext would has oe_hp
set by osc_cache_writeback_range() from the data flush caused by
ldlm lock canceling.
So the EASSERT(!ext->oe_hp && !ext->oe_urgent, ext) is invalid in
this case.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I15514c54af598f2a130c0ac0a3f356468b4cdfce
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56914
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mikhail Pershin [Wed, 6 Nov 2024 18:26:57 +0000 (21:26 +0300)]
LU-18427 script: allow llog removal scripts on ZFS
Make both scripts working also for ZFS mounts
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: I713548caa2f11af334c7bd10c07ecc81c387f5e1
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56906
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Andreas Dilger [Mon, 4 Nov 2024 21:59:27 +0000 (14:59 -0700)]
LU-17769 tests: print subtest iter in test banner
Print the subtest iteration number/duration in the subtest banner
so that it is more visible across all of the nodes. Otherwise, it
is only printed via "echo" into the full test script run log, and
is not shown in most of the per-subtest logs in Maloo.
Test-Parameters: trivial testlist=sanity env=ONLY=1,ONLY_REPEAT=10
Fixes:
e16e3d46 ("LU-13169 tests: add ONLY_REPEAT parameter to repeat subtests")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ic13196e9bc17a51a1af7a0b5aecaafe3c5349a4c
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56883
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Li Dongyang [Fri, 1 Nov 2024 06:55:36 +0000 (17:55 +1100)]
LU-18392 tests: hold group locks in recovery-small/160
recovery-small/160 starts 10 threads and holding group locks
for 20s.
The osp destroy retries could actually happen on ofd after the 20s
delay, and make those rpc waiting for OST commit while increase
destroys_in_flight.
Make sure we hold on to the group locks while checking for
destroys_in_flight, and add additional check to make sure
the object destroy actually done after releasing the group lock.
Do not cast the transno to 32bit unsigned in osp_sync_interpret(),
which could produce a confusing transno in debug log.
Test-Parameters: trivial testlist=recovery-small env=ONLY=160,ONLY_REPEAT=100
Fixes:
27f787daa7 ("LU-15737 ofd: don't block destroys")
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Change-Id: I2a6ac9700a3e79e9930cee905c1da73da948ba1a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56846
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Etienne AUJAMES [Fri, 25 Oct 2024 10:10:55 +0000 (12:10 +0200)]
LU-18401 utils: check_iam, support more iam records types
This patch fix check_iam to support different keysizes (the entries
offset was wrong for keysize other than fid size).
This adds callbacks to print different type of records for different
IAM files.
The type can be specified with the option "-t". If not, the type is
guess from the file name.
If the type is not supported, they keys and records will be dump in
hexadecimal format.
Here the following type of IAM files supported:
- oi.16.*: FID/inode mapping (already supported):
$ check_iam -r /tmp/oi.16.1
[0x200000401:0x448:0x0] 1157/
3251524137
[0x200000401:0x449:0x0] 1158/
3251524138
...
- lfsck_namespace: LFSCK namespace trace file:
$ check_iam -r /tmp/lfsck_namespace_01
[0:0x0:0x0] 0x0 ()
[0x200000401:0x65:0x0] 0x1 (CHECK_LINKEA)
- lfsck_layout: LFSCK layout trace file:
$ check_iam -r /tmp/lfsck_layout_01
{ parent: [0:0x0:0x0], comp_id: 0, ea_off: 0 } { cfid: [0:0x0:0x0],
ost_idx: 0 }
- nodemap: nodemap configuration:
$ check_iam -r /tmp/nodemap
{ id: 0x0, type: global(15) } { is_active: 1 }
{ id: 0x1, type: cluster(1), subtype: cluster } { name: toto, flag:
0xb8, flag2: 0x0, squash_uid: 65534, squash_gid: 65534, squash_projid:
65534}
{ id: 0x1, type: cluster(1), subtype: roles } { roles: 0xffffffc8}
{ id: 0x1, type: range(2) } { start_nid: 192.168.1.128@tcp,
end_nid: 192.168.1.130@tcp }
Update regression test: conf-sanity 134
Test-Parameters: trivial
Test-Parameters: testlist=conf-sanity
Test-Parameters: testlist=conf-sanity
Test-Parameters: testlist=conf-sanity env=ONLY=134,ONLY_REPEAT=20
Fixes:
99d1f12c7 ("LU-15581 utils: add check_iam util")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: Ic2cae2cbbf1c29daa661b1916d6321b6d87494dd
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56790
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Artem Blagodarenko <ablagodarenko@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Mon, 14 Oct 2024 23:23:26 +0000 (17:23 -0600)]
LU-14520 ldlm: reduce ldlm_lock memory usage
Reduce the size of struct ldlm_lock so that it can fit into a 512-byte
slab allocation. The primary reduction in memory usage is from moving
struct l_ost_lvb into the union for IBITS locks where it is needed,
while it was previously part of the common strucutre. Add assertions
to verify that the l_ost_lvb field is only used for IBITS lock type.
Additionally, shrink some of the other fields in memory to bitfields
that only use the required bits, and pack them together to save space.
These are read-mostly fields for the lifetime of the lock and give
some space to add fields in the future before hitting 512 bytes again.
ldlm_lock BEFORE PATCHED
size: 536, members: 36 size: 496, members: 35
sum used: 536, holes: 0 sum used: 490, holes: 2, sum holes: 6
bit holes: 0 bit holes: 1, sum bit holes: 10
Also reduce struct ldlm_resource by a few bytes, so that 23 can fit
into a single 4096-byte slab instead of the previous 22 in one slab.
ldlm_resource BEFORE PATCHED
size: 184, members: 14 size: 176, members: 14
padding: 7, holes: 0 sum used: 171, holes: 1, sum holes: 5
bit holes: 0 bit holes: 1, sum bit holes: 4
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I7f017a852228f8c9090e890f2766707fdbde2abd
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56685
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 9 Mar 2024 21:54:27 +0000 (14:54 -0700)]
LU-12597 tests: return comma-separated osts_nodes()
Start to return comma-separated OSTs list from osts_nodes(),
to avoid the redundant calling of comma_list() for each user.
Add the tgts_nodes() helper to print combined MDT and OST nodes to
avoid duplicate nodes vs. separate mdts_nodes() + osts_nodes().
Fix the few places that do not call comma_list() on osts_nodes()
output afterward, and code style in sanity-sec test_31.
Fix a minor bug in the error handling of sanity check_stats() where
it was calling "osts-nodes" instead of "osts_nodes".
Later patches will clean up all of the callers of osts_nodes,
but there are too many places it is used to do in a single patch.
Fixes:
f0324c5c2f ("LU-14992 tests: sanity/replay-vbr mkdir on MDT0")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I7ae3278321e7552dc2afd5fbb9f48033af3ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56635
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Ronnie Sahlberg [Thu, 3 Oct 2024 03:31:45 +0000 (23:31 -0400)]
LU-4922 cfs_str2mask: Handle passing in a blank string better
Do not revert the flags to min_mask if passed an empty string
to the function.
Remove exclusion of the changelog_mask parameter from test_133g
as it no longer needs to be skipped.
The change initializes the new mask to the existing mask and only
re-sets it to use min_mask iff the first token in the string is a
'-' or '+'. This fixes a bug where if you were to pass an empty
string to this function it would reset the flags to min_mask.
With this change the flags will be left unchanged.
The only way curently for a user to invoke this function is via
the set_param param command.
That command does check for and will abort if the user tries to
specify "" before calling into cfs_str2mask() thus preventing the
issue in LU-4922 from triggering.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: Ibe43509cbdec250e395e35648d399167026a1a14
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56619
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Ronnie Sahlberg [Thu, 19 Sep 2024 04:08:25 +0000 (00:08 -0400)]
LU-18231 obd: change obd_abort_mdt_recovery into OBDF_ABORT_MDT_RECOVERY
Change the use of the odb_abort_mdt_recovery bitfield into a bit in
the ofd_flags bitmap and use atomic bit set/clear/test
operations on it.
No logical changes to the code and no changes to locking.
Test-Parameters: trivial
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I827d8eb32b9dc79fb16d76f33bb7169abf228e8b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56417
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Ronnie Sahlberg [Thu, 19 Sep 2024 03:56:03 +0000 (23:56 -0400)]
LU-18231 obd: change obd_abort_recovery into OBDF_ABORT_RECOVERY
Change the use of the odb_abort_recovery bitfield into a bit in
the ofd_flags bitmap and use atomic bit set/clear/test
operations on it.
No logical changes to the code and no changes to locking.
Test-Parameters: trivial
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I1ff7f890a7ea67d2609ac3cb887a874e7ae6377b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56416
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Ronnie Sahlberg [Thu, 19 Sep 2024 03:45:24 +0000 (23:45 -0400)]
LU-18231 obd: change obd_recovering into OBDF_RECOVERING
Change the use of the odb_recovering bitfield into a bit in
the ofd_flags bitmap and use atomic bit set/clear/test
operations on it.
No logical changes to the code and no changes to locking.
Test-Parameters: trivial
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I031da297c4c6d0325851ddeac0768ea21d88e25f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56415
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Ronnie Sahlberg [Thu, 19 Sep 2024 02:48:46 +0000 (22:48 -0400)]
LU-18231 obd: change obd_set_up into OBDF_SET_UP
Change the use of the odb_set_up bitfield into a bit in
the ofd_flags bitmap and use atomic bit set/clear/test
operations on it.
No logical changes to the code and no changes to locking.
Test-Parameters: trivial
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I6b2b691e7cac733788fe239f9fc8ca5f8e749891
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56414
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Ronnie Sahlberg [Thu, 19 Sep 2024 02:38:43 +0000 (22:38 -0400)]
LU-18231 obd: change obd_attach into ODBF_ATTACH
Change the use of the odb_attach bitfield into a bit in
the ofd_flags bitmap and use atomic bit set/clear/test
operations on it.
No logical changes to the code and no changes to locking.
Test-Parameters: trivial
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I2f360f6074e2078fa20b770b5dc2abc173766c9f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56413
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Ronnie Sahlberg [Thu, 19 Sep 2024 02:24:42 +0000 (22:24 -0400)]
LU-18231 obd: Add a bitmap for the flags
We will use this bitmap and convert the current bitfields
into bits that are set/cleared/tested using atomic bit operations.
Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com>
Change-Id: I59ee4621926d0bd79ed0187f6058b888e40315f4
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56412
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Marc Vef [Wed, 18 Sep 2024 13:53:23 +0000 (15:53 +0200)]
LU-9936 utils: Improve ldiskfs_write_dd() writing mount data
Writing the mount data to a file used buffered stream I/O missing a
flush operation with incomplete error handling.
This patch replaces buffered stream I/O with the Unix I/O API and adds
error handling.
Signed-off-by: Marc Vef <mvef@whamcloud.com>
Change-Id: Ia7dfc186b1c6f581dee461bd277f07dcc2eabafa
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56408
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Mikhail Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Marc Vef [Tue, 17 Sep 2024 00:08:58 +0000 (02:08 +0200)]
LU-10249 utils: Fix lustre_rsync program options
The lustre_rsync program options were incomplete and presented
incorrectly, e.g., the -r option.
This patch improves the program options. It adds a short and long
usage message in accordance to the Lustre documentation replacing the
previous usage message. Moreover, a check to specify the mdt device
was added as it was missing. Other small changes were added to improve
user interaction.
Signed-off-by: Marc Vef <mvef@whamcloud.com>
Change-Id: I871a218381b371e61f0b3a258a4773d3e755101e
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56407
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Frederick Dilger [Thu, 12 Sep 2024 22:46:38 +0000 (16:46 -0600)]
LU-17501 libcfs: fix CPT NUMA core exclusion handling
The cfs_cpt_unset_node_core() function was only setting the offset
a single time for the first node, and using the same offset for all
other nodes.
cpu_pattern='C[0]' was only removing the first core on the first
NUMA node when it should be removing a core on every NUMA node.
It produced an output like:
cpu_partition_table=
0 : 1
1 : 2 3
2 : 4 5
when it should have been:
cpu_partition_table=
0 : 1
1 : 3
2 : 5
Signed-off-by: Frederick Dilger <fdilger@whamcloud.com>
Change-Id: I22e1fe1aa73e413cf9c32562ec96f0cf4bd16fe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56347
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Fri, 6 Sep 2024 18:10:05 +0000 (12:10 -0600)]
LU-18210 utils: Fix issues with enhanced 'lfs check'
lfs check takes an optional path argument that should restrict its
output to the targets that are related to the specified file system.
To determine which MGC should be shown the NID embedded in the OBD
name is compared against a NID that is parsed from the mount command
line. There are a few problems with this code:
1. The NID is parsed from the mount command by looking for a ':', but
IPv6 NIDs can contain this character.
2. It doesn't handle case where multiple NIDs are listed on mount
command separated by commas. e.g. "1@kfi,2@kfi:3@kfi,4@kfi:/lustre"
will parse to "1@kfi,2@kfi" which is not a valid NID.
3. Even in the case where we have just two NIDs separated by ':', it
assumes that the first one will be the one we are connected to.
To resolve these issues get_root_path_slow() will now store the entire
NID string used at mount time (after it has been processed by
convert_hostnames()) in the struct root_cache::nid. do_target_check()
will then iterate over each NID in the string using a new nidstrings
function, cfs_nidstr_find_delimiter(). This function contains logic
that was formerly in convert_hostnames(). This should ensure that
each MGS NID is checked.
convert_hostnames() is updated to use cfs_nidstr_find_delimiter() as
well.
Fixes:
6301419509 ("LU-17367 utils: improved hostname and IPv6 NID support")
Fixes:
f5ca6853b8 ("LU-16076 utils: enhance 'lfs check' command")
Test-Parameters: testlist=sanityn env=ONLY=113,FORCE_LARGE_NID=true,LOAD_MODULES_REMOTE=true
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I478c66d77a2b241b910324210475d61b3786c986
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56286
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Feng Lei <flei@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Maximilian Dilger <mdilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Sun, 29 Sep 2024 19:06:53 +0000 (15:06 -0400)]
LU-15420 llite: cleanup ll_lookup_it()
Newer kernels use fscrypt_prepare_new_inode() to enquire if the
inode is really encrypted. The current Lustre stack is not
setup for this. Much of the fscrypt handling happens at the
top of the basic VFS operation hooks. Rework the stack to
move this handling deeper into tha stack to the level of the
function ll_lookup_it(). This change also cleans up the code
greatly.
Change-Id: I803751759aa954403dd802f7277e870c1f9cd6da
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56233
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Fri, 6 Sep 2024 16:34:10 +0000 (23:34 +0700)]
LU-18184 llog: llog_process() with struct llog_process_data
BUG: KASAN: global-out-of-bounds in \
llog_process_or_fork+0xd0e/0xd60 [obdclass]
Calling llog_process 4th argument must be either NULL or
struct llog_process_data
Test-Parameters: trivial testlist=sanity env=ONLY="60a"
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Iff4848365b5123df25d90811412a43307a115214
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56213
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mikhail Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Etienne AUJAMES <eaujames@ddn.com>
Frederick Dilger [Thu, 29 Aug 2024 00:46:18 +0000 (18:46 -0600)]
LU-4315 doc: updating ls-tu man page style
Updating files to match the new code style for Lustre manual pages as
enforced by 'contrib/scripts/checkpatch-man.pl'.
This also includes other changes like removing < > or { } for singular
required arguments and placing [ ] around optional ones as well as
making all arguments CAPITAL and italicized, literal arguments are
bolded. Lines over 80 characters should be split at the natural line
end rather than the word that goes over the limit as fewer lines will
need to be modified when making changes if each sentence is on it's
own line.
Only using features that appear in groff 1.22.3 as this is the
available version is CentOS 8.
Checked files:
- lshowmount.8
- lustre.7
- lustreapi.7
- lustre_routes_config.8
- lustre_routes_conversion.8
- lustre_rsync.8
- mkfs.lustre.8
- mount.lustre.8
- mount.lustre_tgt.8
- nids.5
- plot-llstat.8
- routerstat.8
- tunefs.lustre.8
Test-Parameters: trivial
Signed-off-by: Frederick Dilger <fdilger@whamcloud.com>
Change-Id: Ib932b582273ef567b48e504af2d5437389330dd3
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56191
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Tue, 27 Aug 2024 11:36:22 +0000 (19:36 +0800)]
LU-18114 lctl: split "lctl net_delay_*" group into subcommands
Split "lctl net_delay_*" command group into subcommands, e.g.
"lctl net_delay_add" to "lctl net_delay add".
Also, sanity-lnet.sh is modified to verify this patch.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: I64fa95155f93d8a5d844f9e14673acaea5f4ee60
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56164
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Tue, 27 Aug 2024 11:30:32 +0000 (19:30 +0800)]
LU-18114 lctl: split "lctl net_drop_*" group into subcommands
Split "lctl net_drop_*" command group into subcommands, e.g.
"lctl net_drop_add" to "lctl net_drop add".
Also, sanity-lnet.sh is modified to verify this patch.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: I5094328435e5b93a8a7311f26ec77275211e0517
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56154
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Tue, 27 Aug 2024 11:26:08 +0000 (19:26 +0800)]
LU-18114 changelog: split "lctl changelog_*" group into subcommands
Split "lctl changelog_*" command group into subcommands, e.g.
"lctl changelog_register" to "lctl changelog register".
Also, test-framework is modified to verify this patch.
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: Ifd2c92ab3173507084342b7b575c2506e0e4bb9a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56133
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Frederick Dilger <fdilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Tue, 27 Aug 2024 11:22:02 +0000 (19:22 +0800)]
LU-18114 snapshot: split "lctl snapshot_*" group into subcommands
Split "lctl snapshot_*" command group into subcommands, e.g.
"lctl snapshot_create" to "lctl snapshot create".
Also, lsnapshot in test-framework.sh is modified to verify
this patch.
Test-Parameters: trivial fstype=zfs testlist=sanity-lsnapshot
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: I30bf6f8a853f57bd1a14d5acb2b5aa4b3d49be71
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56120
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Frederick Dilger <fdilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Thu, 22 Aug 2024 03:07:06 +0000 (11:07 +0800)]
LU-18114 barrier: split "lctl barrier_*" group into subcommands
Split "lctl barrier_*" command group into subcommands, e.g.
"lctl barrier_freeze" to "lctl barrier freeze".
Also, sanity.sh test_801c is modified to verify this patch.
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: Ibccc0206bae6ef0fa8efd744b46c7f864aa42cbe
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56107
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Frederick Dilger <fdilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Tue, 20 Aug 2024 15:27:32 +0000 (17:27 +0200)]
LU-18158 sec: hint client in case of failed reint open
In case of failed file open, the Lustre client is already able to send
alternative supplementary groups to the server using a retry
mechanism. If the first attempt fails, then the failure reply from the
server includes a hint with a possible supplementary group and ACLs.
The client then retries with an alternative supplementary group,
selected using information hinted in the reply from the MDT.
The same mechanism can be implemented for all reint open cases.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Ic5e309cfbdb6d388397e3e251b2d007a612fd214
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56098
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Frederick Dilger [Wed, 26 Jun 2024 22:16:56 +0000 (16:16 -0600)]
LU-17501 libcfs: allow CPT exclude list for cores
Allow a relative CPU core exclude list to be specified when
constructing the CPT distribution instead of having to specify all of
the CPU cores except the ones that should be avoided. The CPU core
numbers are the relative core numbers to each NUMA node, such that
for each node, the Mth to Nth cores are excluded. The exclude list
is set by specifying 'C' in /etc/modprobe.d/lustre.conf for the CPT
number, with either a comma-separated list or a range of CPU cores:
options libcfs cpu_pattern="N C[0-3]"
or:
options libcfs cpu_pattern="C[0,1,2,3]"
Both options are equivalent. This would exclude cores 0-3 on each NUMA
node from use by LNet and Lustre.
It isn't possible to specify both include and exclude lists at the
same time, but it doesn't really make sense to do this anyway.
Signed-off-by: Frederick Dilger <fdilger@whamcloud.com>
Change-Id: Ief5f36e0bbc49865317cee199c91c9b4a350c418
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/55544
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Sebastien Buisson [Wed, 19 Jun 2024 14:15:43 +0000 (16:15 +0200)]
LU-17961 sec: add server_upcall rbac role
The purpose of the new server_upcall rbac role is to control whether
clients use the server side defined identity upcall. When set, clients
do comply with the server side identity upcall. When not set, clients
are leveraging the special INTERNAL identity upcall, which means
servers trust supplementary groups as provided by the clients.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I01dcedad5da0e175aa7b8d187f2affd34d933e39
Was-Change-Id: I39a69904ce4709eacf6f08173d3cfe42e247b5bd
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/55475
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Thu, 10 Feb 2022 16:14:02 +0000 (17:14 +0100)]
LU-17961 sec: support supplementary groups from client
The usual way to support more than 2 supplementary groups is to
resort to the server side's identity upcall. This identity upcall
retrieves all user's credentials, including all supplementary groups,
and stores them in cache. But this access to user's credentials from
server side is not always an option.
As an alternative to the server side's identity upcall, we implement
a retry mechanism for intent locking. The client can provide at most
2 supplementary groups in the request sent to the MDS, but sometimes
it does not know which ones are useful for credentials calculation on
server side. For instance in case of lookup, the client does not have
the child inode yet when it sends the intent lock request.
Hopefully, the server can hint at the useful groups, by putting in the
request reply the target inode's GID, and also its ACL. So, in case
the server replies -EACCES, we check the user's credentials against
those, and try again the intent lock request if we find a matching
supplementary group.
On server side, we add an INTERNAL dedicated, separate upcall cache.
This makes it distinct from the regular identity upcall cache that can
be defined to use any upcall including NONE, per an MDT side tuning.
It implements a particular behavior which does not involve an actual
upcall, but instead the cache is filled with supplementary groups read
from the client request, cumulatively at each request.
Dedicated mdt-side tunables are created to configure the entry expiry
time and the acquire expire time for INTERNAL, as well as a tunable to
flush the INTERNAL upcall cache.
A problem with the 'runas' utility was found during testing. If no
supplementary group is provided via the '-G' option, then it needs at
least to set the given GID as a supplementary group. Otherwise the
supplementary groups of the invoking user would be silently inherited.
For instance, if root user calls 'runas -u 500 -g 500 $CMD', we must
not execute $CMD with UID:GID 500:500 and supplementary group 0, as
it would make the user executing $CMD part of the superuser group.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I4608bb766a70ca12a2142a0e2687813f3a4b9100
Was-Change-Id: I4b2298cf5c3b400e7a1436384653ce01a462a2e0
Was-Change-Id: I4bcc7e07a4f4886c5994d17cbef72ea09eb1be1d
Was-Change-Id: If55182ca29f37f2a783fdb88ba46512944a61c47
Was-Change-Id: I72cdfc6b76bfd9c2832a5d5e5f72c3aa45cf1efe
Was-Change-Id: Ie7088bdbfcae396602b59e2ab07fbfbbb14d96af
Was-Change-Id: I2af9c3964978c842dac8f70ad814adb529dff39f
Was-Change-Id: I0267182fbfa646de40ac62f832e89fbfd8477822
Was-Change-Id: Ifad125815318f07b332c6323feffbd216dad6144
Was-Change-Id: I29f1fa5744659e6095203e860267c6ed02268943
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/55474
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lei Feng [Tue, 6 Jun 2023 11:47:05 +0000 (19:47 +0800)]
LU-10499 tests: disable metadata_csum_seed for pcc cache device
latest e2fsprogs enable metadata_csum_seed feature when mkfs.ext4
a device, which is used in pcc test as a cache device. Such a ext4
fs cannot be mounted on an old kernel of el7. So disable this
feature for pcc cache device if it is detected in sanity-pcc test.
EX-7596 tests: don't fail if metadata_csum_seed unset
Fix logic in the sanity-pcc cache filesystem setup. With mke2fs
1.47.0-wc1 it enabled metadata_csum_seed unconditionally, but it
caused problems on el7.9 kernels. In 1.47.0-wc2 it disabled that
feature, caused the check for removing the feature to fail.
Since metadata_csum_seed has been available since 1.44.2 it
shouldn't be a problem to force it off duing mke2fs.
Was-Change-Id: Ic04ab4043981dc9b5c32e01c4aa85be343e3f3f8
EX-6826 tests: wait before unmounting pcc device if busy
wait at most 10 seconds before unmounting pcc device
if it is busy.
Was-Change-Id: I77ec018d33d14af99bdc5d5c5c94c8fa0dafdb61
EX-bug-id: EX-7596 EX-6826
Test-Parameters: trivial testlist=sanity-pcc clientdistro=el8.10
Signed-off-by: Lei Feng <flei@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I2ef3ff27b49fb479ec348b742cf614a43321813b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/54486
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Patrick Farrell [Tue, 4 Apr 2023 14:17:13 +0000 (10:17 -0400)]
LU-15198 llite: Use percpu_env for tiny_write_end
The percpu cl_env can be used in situations where it is
known the caller will not be rescheduled. This is true for
ll_tiny_write_end, and switching to the percpu env gives
a performance improvement of a little over 7%.
dd, write size 8 bytes
Before:
14.3 MiB/s
After:
15.4 MiB/s
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: Iadeabf145416d80f6cb063ccdc8bccb4b4b214a1
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/45477
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Arshad Hussain [Tue, 15 Oct 2024 11:02:42 +0000 (07:02 -0400)]
LU-6142 tests: Use correct type for MGS
When checking for MDS backend do use 'mds1_FSTYPE'
instead of mgs_FSTYPE which is not defined
Test-Parameters: trivial
Fixes:
3070ca9b1 (LU-4684 tests: enable racer directory migration)
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I11ae6956a03be9a076b7a5da72e9efc672230bdb
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56695
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Wed, 2 Oct 2024 09:04:33 +0000 (05:04 -0400)]
LU-6142 tests: Use correct target/d* name under init_src
This patch fixes init_src() calling /tmp/target/d*
with incorrect filename.
Test-Parameters: trivial testlist=lustre-rsync-test
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Iac5865b3b232e5897eba5ac994fa318ecb35d2d5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56565
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Timothy Day [Sat, 7 Sep 2024 21:16:53 +0000 (17:16 -0400)]
LU-6142 misc: consolidate license files in LICENSES/
This patch is solely meant to clarify how Lustre is
licensed. It doesn't not alter the licensing itself in
anyway.
Consolidate the scattered license files in the LICENSES/
directory at the root of the Lustre tree. Add missing
license files for BSD-2-Clause and LGPL-2.1. This mimics
the Linux kernel - each file in the tree gets annotated
with SPDX text indicating its license and readers refer
to LICENSES/ and COPYING for details.
The COPYING file now clearly reflects that the Lustre
kernel modules, as a whole, are GPLv2. The remaining
components are governed by their own GPLv2 compatible
licenses annotated in the individual files.
Copying the license-rules.rst from Linux and add a note
that clarifies that these refer explicitly to the kernel
modules.
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: Iee64881f6fa5f41e4c426f4ebe941fba7ddd31a9
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56294
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Patrick Farrell [Fri, 12 Jul 2024 15:57:30 +0000 (11:57 -0400)]
LU-13814 clio: rename pvec to cdp
Pvec is an older naming convention that sort of matches a
convention used in the kernel, but is really starting to
feel odd as a local variable name for cl_dio_pages.
Rename accordingly.
Test-Parameters: trivial
Signed-off-by: Patrick Farrell <patrick.farrell@oracle.com>
Change-Id: I375b80e4e50dcb2aa7c640df32a8fe896e5fc082
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52492
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Patrick Farrell [Fri, 12 Jul 2024 15:56:14 +0000 (11:56 -0400)]
LU-13814 clio: rename ll_dio_pages to cl_dio_pages
ll_dio_pages was originally mostly used in the llite layer,
but its usage is now expanding throughout clio.
Rename it accordingly.
Test-Parameters: trivial
Signed-off-by: Patrick Farrell <patrick.farrell@oracle.com>
Change-Id: Id52ded6231510bb16eaf98b08f2eb2146b7ac582
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52102
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Patrick Farrell [Fri, 23 Feb 2024 16:23:57 +0000 (11:23 -0500)]
LU-13814 llite: add to/from to ll_dio_pages
ll_dio_pages is the main way we package pages for a DIO, so
as we work on removing cl_page for DIO, we need to put some
of the info in this struct.
This puts the 'to, from' page offsets for incomplete pages
in the package. This works because all pages except the
first and the last must be complete (the first and last can
be the same page).
Test-Parameters: trivial
Signed-off-by: Patrick Farrell <patrick.farrell@oracle.com>
Change-Id: I0ae4d617cb2f1310ae5981a9f9eb1480d13e1054
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52101
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Patrick Farrell [Fri, 23 Feb 2024 16:23:27 +0000 (11:23 -0500)]
LU-13814 clio: transient page related cleanups
Add a few more asserts that transient pages are never
passed to certain functions and remove one unused
declaration.
This series has removed a decent bit of code and
bookkeeping activity from the DIO path, even without
getting to the much bigger wins related to removing
cl_page for DIO.
This gets us about a 17% improvement in DIO
performance - note this is a very different node
from the one which gave us 18 GiB/s two years ago.
ior --posix.odirect -w -r -t 256M -b 64G
Without series:
8.5 GiB/s DIO write
9.6 GiB/s DIO read
With series:
10.1 GiB/s DIO write
11 GiB/s DIO read
Signed-off-by: Patrick Farrell <patrick.farrell@oracle.com>
Change-Id: Ic90bd349a1ded8c1484dc8be29418adb8f229026
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52088
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Alex Zhuravlev [Wed, 20 Nov 2024 20:28:55 +0000 (15:28 -0500)]
LU-18468 llapi: always truncate mirrors on resync
When mirrors are synced, all mirrors should be truncated to
match the size of the source/primary mirror. This was
skipped if the size was unaligned, but that is a mistake.
Test-Parameters: testlist=sanity-flr,sanity-flr,sanity-flr
Test-Parameters: testlist=sanity-pfl,sanity-pfl,sanity-pfl
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I767a1b3ef58c855f57967228d37b04fa0ab87e57
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57090
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Zhenyu Xu <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 14 Nov 2024 22:03:43 +0000 (15:03 -0700)]
LU-18354 tests: avoid sanity/136 OOM on ZFS servers
Creating 150k files in sanity test_136 is causing OOM issues on
ZFS servers. I'm not sure what might be causing that, but it is
disruptive to all patch review testing. Rather than stop testing
on ZFS it is better to flush memory periodically on the MDS so the
test can continue to test the intended changelog functionality.
Test-Parameters: trivial
Test-Parameters: testlist=sanity env=ONLY=136,SLOW=yes,ONLY_MINUTES=60 fstype=zfs
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I4856d80a911eebcfcdaff2d2a1c91ef49645f0b4
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57036
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Emoly Liu [Sun, 10 Nov 2024 04:35:51 +0000 (12:35 +0800)]
LU-14094 tests: give zfs more wait time to unlink
In sanity.sh test_311, give zfs more wait time to unlink more
files as expected.
Test-Parameters: trivial fstype=zfs testlist=sanity env=ONLY=311,ONLY_REPEAT=200
Test-Parameters: trivial fstype=zfs testlist=sanity env=ONLY=311,ONLY_REPEAT=200
Test-Parameters: trivial fstype=zfs testlist=sanity env=ONLY=311,ONLY_REPEAT=200
Test-Parameters: trivial fstype=zfs testlist=sanity env=ONLY=311,ONLY_REPEAT=200
Test-Parameters: trivial fstype=zfs testlist=sanity env=ONLY=311,ONLY_REPEAT=200
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: I17f278df3826fa38b71713c610d644cc7676c1ad
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56952
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Mikhail Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Wed, 6 Nov 2024 04:00:06 +0000 (21:00 -0700)]
LU-18356 tests: allow server to specify except list
Allow the installed server code to specify a lists of subtests that
should be excluded by older clients when running a particular test
script. This allows older clients to skip tests that they would
otherwise run from their local test script, but that do not work due
to server changes.
The files for each test script are read from the mds1 and ost1 facets.
The filename(s) under lustre/tests/except/ should start with the base
test script name (e.g. sanity), followed by '.', an optional unique
string to avoid conflicts between patches, and end with ".ex".
For example, sanity.ex, sanity.test_142.ex, sanity.acl.ex are valid
"sanity.sh" except filenames, but sanity-acl.ex is not.
Lines starting with '#' are comments and ignored. Otherwise, lines
should have whitespace-separated fields on each line, as shown in the
examples below.
#facet op need_version jira space_separated_subtests
mds1 < v2_14_55-100-g8a84c7f9c7 LU-14927 0f
linux < 5.12.0 LU-18102 27J
client == OST1_VERSION LU-13081 151 156
The facet may be "client", "mds1", "ost1", or "linux" (client), and
"need_version" can be any Lustre (or Linux) version number or another
version name like OST1_VERSION, MDS1_VERSION, or CLIENT_VERSION.
The "op" can be standard math/logic comparisons ">=", "<", "!=", etc.
The version comparison is handled like the below pseudo-code:
${FACET}_VERSION $op $need_version OR except $subtests
In other words, the version check must be true or the subtest(s) will
not be run. Checks within a single file should be ordered by subtest
number to make it easier to see whether some subtest is being skipped.
Test-Parameters: trivial testlist=sanity serverversion=2.15
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I0216d9980147ce3409807e9d7f9759fe533ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56901
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Fri, 22 Nov 2024 08:16:01 +0000 (11:16 +0300)]
LU-18481 quota: free array in qmt_alloc_lock_array
qmt_alloc_lock_array() may leak memory if no locks have been found.
Test-Parameter: testlist=sanity-quota
Test-Parameter: testlist=sanity-quota
Test-Parameter: testlist=sanity-quota
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I58e50bf30f7eae3dd4aed06879d74ed53d3b781a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/57107
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sergey Cheremencev <scherementsev@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Qian Yingjin [Wed, 30 Oct 2024 08:56:35 +0000 (16:56 +0800)]
LU-18415 pcc: fix panic when add/remove PCC backends
PCC panic on CSI drvier when add/remove PCC backends on a client
as follows:
RIP: 0010:strlen+0x0/0x20
Call Trace:
pcc_dataset_rule_init [lustre]
pcc_cmd_handle [lustre]
ll_pcc_seq_write [lustre]
vfs_write
ksys_write
There are some bugs in the error handling for PCC setup and
cleanup. This may result in double memory free or list struct
corrupting. Fix it accordingly.
Signed-off-by: Qian Yingjin <qian@ddn.com>
Change-Id: I04d616395c095748aa195df5f2979a85de79dded
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56824
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Sat, 24 Jun 2023 12:12:08 +0000 (07:12 -0500)]
LU-18391 lnet: Revert nid hash for gnilnd
Using hash_long() method for gnilnd apparently results in performance
degradation. It is not understood why this is, but for now revert to
the sum-by-multiplication of nid bytes method for gnilnd.
Test-Parameters: trivial
HPE-bug-id: LUS-11675
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I781658afb41e4c528d0d6d3aa3f73cbb928b9478
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56771
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Thu, 7 Nov 2024 04:32:40 +0000 (11:32 +0700)]
LU-18388 llite: handle -EOPNOTSUPP in get_inode_acl
When ll_xattr_list returns -EOPNOTSUPP [-95] NULL should be
returned to avoid sanity failing to run as non-root users with:
operation mds_getxattr to node 192.168.122.50@tcp failed: rc = -95
Test-Parameters: testlist=sanity env=ONLY=103a,ONLY_REPEAT=10 mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=sles15sp6 serverdistro=el8.8
Test-Parameters: testlist=sanity env=ONLY=103a,ONLY_REPEAT=10 mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=ubuntu2404 serverdistro=el8.8
Test-Parameters: testlist=sanity env=ONLY=103a,ONLY_REPEAT=10 mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=el9.3 serverdistro=el8.8
Test-Parameters: testlist=sanityn env=ONLY=25a,ONLY_REPEAT=10 mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=ubuntu2404 serverdistro=el8.8
Test-Parameters: testlist=sanity-sec env=ONLY=23b,ONLY_REPEAT=50 mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=ubuntu2404 serverdistro=el8.8
Fixes:
13fd5ebef3 ("LU-18101 sec: fix ACL handling on recent kernels again")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I208e7e6095c19728643a6d208becd448ed2e2539
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56756
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Nathaniel Clark [Fri, 18 Oct 2024 19:08:23 +0000 (15:08 -0400)]
LU-18381 doc: Fix example in lctl-nodemap-modify.8
Use valid string in example instead of string that "currently works"
Test-Parameters: trivial
Fixes:
8a770616a5ad ("LU-14797 sec: add projid to nodemap")
Signed-off-by: Nathaniel Clark <nclark@whamcloud.com>
Change-Id: Ia3f55510ad398acb3729acfad174ade9e060a2ae
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56735
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Maximilian Dilger <mdilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Mon, 18 Nov 2024 19:53:03 +0000 (11:53 -0800)]
LU-18371 kernel: update SLES15 SP6 [6.4.0-150600.23.25.1]
Update SLES15 SP6 kernel to 6.4.0-150600.23.25.1 for Lustre client.
Test-Parameters: trivial mdtcount=4 mdscount=2 \
clientdistro=sles15sp6 testlist=sanity
Test-Parameters: optional clientdistro=sles15sp6 testgroup=full-part-1
Test-Parameters: optional clientdistro=sles15sp6 testgroup=full-part-2
Test-Parameters: optional clientdistro=sles15sp6 testgroup=full-part-3
Change-Id: Ia9e6a286b50040ad3ce1247216ba9b60a5582658
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56704
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Mon, 18 Nov 2024 19:47:36 +0000 (11:47 -0800)]
LU-18423 kernel: update RHEL 8.10 [4.18.0-553.27.1.el8_10]
Update RHEL 8.10 kernel to 4.18.0-553.27.1.el8_10.
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.10 serverdistro=el8.9 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.10 serverdistro=el8.9 testlist=sanity
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.10 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.10 testlist=sanity
Test-Parameters: optional clientdistro=el8.10 serverdistro=el8.10 \
testgroup=full-part-1
Test-Parameters: optional clientdistro=el8.10 serverdistro=el8.10 \
testgroup=full-part-2
Test-Parameters: optional clientdistro=el8.10 serverdistro=el8.10 \
testgroup=full-part-3
Change-Id: I3737c1f1b2941d2095225f1ab80fd76768c4782c
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56888
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Jian Yu [Mon, 18 Nov 2024 19:42:18 +0000 (11:42 -0800)]
LU-18414 kernel: update RHEL 9.4 [5.14.0-427.42.1.el9_4]
Update RHEL 9.4 kernel to 5.14.0-427.42.1.el9_4.
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el9.4 serverdistro=el9.3 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el9.4 serverdistro=el9.3 testlist=sanity
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el9.3 serverdistro=el9.4 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el9.3 serverdistro=el9.4 testlist=sanity
Test-Parameters: optional clientdistro=el9.4 serverdistro=el9.4 \
mdscount=2 mdtcount=4 ostcount=8 testgroup=full-dne-part-1
Test-Parameters: optional clientdistro=el9.4 serverdistro=el9.4 \
mdscount=2 mdtcount=4 ostcount=8 testgroup=full-dne-part-2
Test-Parameters: optional clientdistro=el9.4 serverdistro=el9.4 \
mdscount=2 mdtcount=4 ostcount=8 testgroup=full-dne-part-3
Change-Id: Ib1b95bcaf35a9f8ed80fe7a33b51127086dd412c
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56845
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Mon, 18 Nov 2024 07:41:16 +0000 (23:41 -0800)]
LU-18387 kernel: new kernel [RHEL 9.5 5.14.0-503.14.1.el9_5]
This patch makes changes to support new RHEL 9.5 release
for Lustre client.
Test-Parameters: trivial \
mdtcount=4 mdscount=2 clientdistro=el9.5 testlist=sanity
Test-Parameters: optional clientdistro=el9.5 testgroup=full-part-1
Test-Parameters: optional clientdistro=el9.5 testgroup=full-part-2
Test-Parameters: optional clientdistro=el9.5 testgroup=full-part-3
Change-Id: I1bce12b2b7190bcbd880916049667630aba700c8
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56748
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Alex Deiter <adeiter@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Qian Yingjin [Thu, 10 Oct 2024 09:48:19 +0000 (17:48 +0800)]
LU-16907 ptlrpc: correct the reply buffer size for batch RPC
The calculation for growing reply buffer size for a batch RPC is
incorrect and it adds the SUB request size wrongly.
This may result in the following panic:
"Max IOV exceeded: 257 should be < 256"
Fix it accordingly.
Fixes:
5a2dfd36f9c ("LU-14139 ptlrpc: grow PtlRPC properly when prepare sub request")
Test-Parameters: testlist=sanity env=ONLY=123f,ONLY_REPEAT=10
Signed-off-by: Qian Yingjin <qian@ddn.com>
Change-Id: I3c5151a485cac7f3fb9384cd9fb022143ca3389d
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56645
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Feng Lei [Thu, 10 Oct 2024 01:18:59 +0000 (09:18 +0800)]
LU-17660 tests: test symlink file to existing dir
Create a test case to verify LU-17660.
Symlink a file to an existing dir. Expect the symlink entry
under dir. Error if report "cannot overwrite directory".
Fixed in kernels newer than v6.9-rc4-39-gbb32cded3be2 or with
a backported fix.
Signed-off-by: Feng Lei <flei@whamcloud.com>
Test-Parameters: trivial
Test-Parameters: clientdistro=el8.10 testlist=sanity env=ONLY=17p
Test-Parameters: clientdistro=el9.4 testlist=sanity env=ONLY=17p
Test-Parameters: clientdistro=sles15sp5 testlist=sanity env=ONLY=17p
Test-Parameters: clientdistro=sles15sp6 testlist=sanity env=ONLY=17p
Test-Parameters: clientdistro=ubuntu2204 testlist=sanity env=ONLY=17p
Test-Parameters: clientdistro=ubuntu2404 testlist=sanity env=ONLY=17p
Change-Id: I905813c26e78ae3e6df4f88af10ab3f0c596a59b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56639
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Sergey Cheremencev [Mon, 30 Sep 2024 13:52:05 +0000 (16:52 +0300)]
LU-18279 obdclass: fix class_add_nids_to_uuid
Fix class_add_nids_to_uuid to utilize all 32
(MTI_NIDS_MAX) elements in lnet_nid array instead of
31 (MTI_NIDS_MAX -1).
Signed-off-by: Sergey Cheremencev <scherementsev@ddn.com>
Change-Id: Ibbedda6e28e6c26b11ae95d89ad31afd812c559f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56541
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Elena Gryaznova [Fri, 27 Sep 2024 10:44:01 +0000 (13:44 +0300)]
LU-18273 tests: do reboot and failback in several attempts
Instead of playing around the ha_failback_delay values
different for different clusters and to avoid the tests
failures unrelated to Lustre - it looks reasonable just to
try "failover/failback" several times.
Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-11816
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I748e4e580408f7662b2c64576af36637cfe46ef3
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/56514
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
git://git.whamcloud.com / fs / lustre-release.git / log