Whamcloud - gitweb
Alex Zhuravlev [Sat, 11 Nov 2023 12:21:48 +0000 (15:21 +0300)]
LU-17284 mdt: revalidate object for migration
if the source object is remote, then we should revlidate it
once the object's ldlm lock is granted. otherwise we can't
use the object's attributes:
lu_object_attr())
ASSERTION( ((o)->lo_header->loh_attr & LOHA_EXISTS) != 0
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I9896cdd011f858091ac68b50b74e2f1f027f7331
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53087
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Andrew Perepechko [Tue, 26 Dec 2023 17:02:12 +0000 (20:02 +0300)]
LU-16637 llite: tolerate fresh page cache pages after truncate
Truncate called by ll_layout_refesh() can race with a fast read
or tiny write, which can add an uninitialized non-uptodate page
into the page cache.
We want to avoid expensive locking for this rare case so if there
is any leftover in the cache after truncate, just check that
the pages are not uptodate, not dirty and do not have any
filesystem-specific information attached to them.
Change-Id: I8cadc022a3d1822a585f32e1a765e59ad0ff434d
Signed-off-by: Andrew Perepechko <andrew.perepechko@hpe.com>
HPE-bug-id: LUS-11937
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53554
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Zhenyu Xu <bobijam@hotmail.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Sun, 7 Jan 2024 15:13:38 +0000 (08:13 -0700)]
LU-13307 nodemap: have nodemap_add_member support large NIDs
Currently when mounting lustre using IPv6 address fails with
Lustre: 27361:0:(nodemap_handler.c:395:nodemap_add_member())
lustre-MDT0000: error adding to nodemap, no valid NIDs found
LustreError: 11-0: lustre-MDT0000-osp-MDT0003:
operation mds_connect to node 0@lo failed: rc = -22
This was due to no nodemap being set so the ptlrpc layer was not
seeing any new peers. Adding minimal support to nodemap allows
mounting.
Change-Id: If9cfe88ec92afc3f14788f3f3ded8387a1b5d8c7
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53135
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Tue, 9 Jan 2024 06:12:57 +0000 (11:42 +0530)]
LU-16861 obdfilter: Exclude quotes when getting NIDs
In get_targets(), when getting NIDs the quotes were also included.
Exclude quotes when generating NIDs as they are not required.
Use $LCTL instead of $lctl, and make it also work in Janitor testing.
Test-Parameters: trivial testlist=obdfilter-survey
Fixes:
9ef9906d7 ("LU-6863 tests: change obdfilter-survey.sh for CLIENTONLY mode")
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I8642539fc6b396f1339e20e4fef8bc78cda2d969
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53620
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 4 Jan 2024 21:32:13 +0000 (14:32 -0700)]
LU-17054 lnet: use GFP_KERNEL for alloc w/o spinlock
Do not use genradix_ptr_alloc(GFP_ATOMIC) when not allocating
under a spinlock in lnet_cpt_of_nid_show_start(), since this
puts unnecessary strain on the atomic memory pools. This
function grabs mutex_lock(&the_lnet.ln_api_mutex) so the caller
cannot be holding a spinlock at the time.
Fix minor code style issues in this function.
Fixes:
466e25a6a3 ("LU-17054 lnet: Change cpt-of-nid to get result from kernel")
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I091959940bffadc380bff9329bb83e8b099ed63f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53596
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 4 Jan 2024 05:20:35 +0000 (22:20 -0700)]
LU-17394 libcfs: print cfs_fail_val when fail_loc hit
Add some more information to the console message when fail_loc is hit.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I99fe4524f3764b068c96965c0b86bd4d7b341707
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53585
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
John L. Hammond [Thu, 4 Nov 2021 16:12:57 +0000 (11:12 -0500)]
LU-17172 lov: include FID in some lov asserts
Include the file FID in the assertions in lov_entry() and
lov_mirror_entry(). Use these two functions more consistently in the
lov layer.
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I65978fe409842289c158021fb1b8042916d90e23
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52602
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Brian Atkinson [Tue, 26 Sep 2023 18:35:43 +0000 (12:35 -0600)]
LU-16791 utils: ZFS 2.2 const prop args
ZFS 2.2 now expects const char * from certain interfaces in
sys/nvpair.h. I updated the build system to detect if this is the case
and if so update the paramters passed to certain functions in
libmount_utils_zfs.c to account for these changes.
Without this patch, Lustre master would not build with ZFS master and
the 2.2 release candidates.
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Change-Id: I0469eeff6dafa6c276fc616381530b6b679d9da1
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52519
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Thomas Bertschinger <bertschinger@lanl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Shaun Tancheff [Thu, 4 Jan 2024 23:34:37 +0000 (15:34 -0800)]
LU-17351 ldiskfs: RHEL 9.3 ldiskfs server
Updated patch series for el9.3 needs an updated
ext4-data-in-dirent
Test-Parameters: trivial env=SANITY_EXCEPT="906" \
mdtcount=4 mdscount=2 \
clientdistro=el9.3 serverdistro=el9.2 testlist=sanity
Test-Parameters: trivial mdtcount=4 mdscount=2 \
clientdistro=el9.2 serverdistro=el9.3 testlist=sanity
Test-Parameters: optional clientdistro=el9.3 serverdistro=el9.3 \
testgroup=full-part-1
Test-Parameters: optional clientdistro=el9.3 serverdistro=el9.3 \
testgroup=full-part-2
Test-Parameters: optional clientdistro=el9.3 serverdistro=el9.3 \
testgroup=full-part-3
HPE-bug-id: LUS-12050
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Change-Id: Iac9731570422c57ef494602b1a40ac0b3d87d991
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53394
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: xinliang <xinliang.liu@linaro.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 4 Jan 2024 21:07:43 +0000 (14:07 -0700)]
LU-10391 lnet: use GFP_ATOMIC for alloc under spinlock
Use genradix_ptr_alloc(GFP_ATOMIC) when allocating under a spinlock
(in this case lnet_net_lock_current() is acquiring the per-CPT lock)
to avoid "BUG: sleeping function called from invalid context" in
lnet_discover() and lnet_scan_route() when memory debugging enabled.
BUG: sleeping function called from invalid context at page_alloc.c:3423
in_atomic(): 1, irqs_disabled(): 0, pid: 22268, name: lnetctl
CPU: 3 PID: 22268 Comm: lnetctl 3.10.0-7.9-debug #1
Call Trace:
dump_stack+0x19/0x1b
__might_sleep+0xd9/0x100
__alloc_pages_nodemask+0x313/0xca0
alloc_pages_current+0x98/0x110
__get_free_pages+0xe/0x50
__genradix_ptr_alloc+0xa2/0x1a0 [libcfs]
lnet_discover+0x16e/0x220 [lnet]
lnet_ping_cmd+0x6ab/0x1160 [lnet]
genl_family_rcv_msg+0x1fa/0x420
genl_rcv_msg+0x5b/0xc0
netlink_rcv_skb+0xa9/0xc0
genl_rcv+0x28/0x40
netlink_unicast+0x16a/0x210
netlink_sendmsg+0x308/0x420
sock_sendmsg+0xb0/0xf0
___sys_sendmsg+0x401/0x410
__sys_sendmsg+0x51/0x90
SyS_sendmsg+0x12/0x20
Fixes:
68254c484a ("LU-10391 lnet: handle discovery with Netlink")
Fixes:
4ccac8297d ("LU-9680 lnet: collect data about routes using Netlink")
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I96f1fd6f6273a7720d661526e58a94210f3ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53597
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Shaun Tancheff [Tue, 9 Jan 2024 05:49:13 +0000 (12:49 +0700)]
LU-17398 build: detect mlnx-ofa_kernel-devel contents
Parse the configure_args for --with-o2ib and allow the
user specified path to override the mofed defaults.
Further when mlnx-ofa_kernel-devel contents are available silence
the BuildRequires: to allow for an mlnx source installation to
satisfy the lustre build requirements.
In addition move the mlnx specfic requirements to the mofed lnd
when '--with multiple_lnds' is enabled.
Fixes:
67cd54d05d ("LU-16967 build: Separate lnet LND rpm packaging")
Test-Parameters: trivial
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I30c6b3a196021634c621f6f6c556bf32f28faeed
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53613
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Shaun Tancheff [Sat, 6 Jan 2024 15:13:27 +0000 (22:13 +0700)]
LU-17398 build: quash rpmbuild false warning
Rewrite comment so %() is escaped and does not generate
a false and misleaning warning during build:
sh: -c: line 0: syntax error near unexpected token `)'
sh: -c: line 0: `)'
warning: Macro expanded in comment on line 261: %()
Test-Parameters: trivial
Fixes:
67cd54d05d ("LU-16967 build: Separate lnet LND rpm packaging")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I94fa0da88a5c7f64461cd8fc3cea343a7a087413
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53604
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Alexandre Ioffe [Fri, 29 Dec 2023 05:42:41 +0000 (21:42 -0800)]
LU-17370 utils: simplify lfs help text
Simplify help text for lfs getstripe and lfs setstripe.
Update corresponding man pages lfs-getstripe and lfs-setstripe.
On man pages make left side adjustment and disable hyphenation:
'.nh', '.ad l' to prevent hyphenation of keywords
Signed-off-by: Alexandre Ioffe <aioffe@ddn.com>
Test-Parameters: trivial
Change-Id: Iae9d3534230ee7d325fbeffd78b5c12632a4a161
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53564
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Yang Sheng [Wed, 27 Dec 2023 18:26:41 +0000 (02:26 +0800)]
LU-17276 tests: performance test case for flock
Add some test cases for flock performance.
Test-Parameters: trivial testlist=performance-sanity env=ONLY=6,ONLY_REPEAT=50
Signed-off-by: Yang Sheng <ys@whamcloud.com>
Change-Id: Id76d38e14bec6a095fe26e22d08569731d4669c9
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53558
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Timothy Day [Fri, 15 Dec 2023 21:17:18 +0000 (21:17 +0000)]
LU-16502 lutf: add headers to lutf C code
Add SPDX text and documentation to lutf C code.
This will make it easier for developers to
find where different functionality lives.
Test-Parameters: @lnet
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I67d8acc6b5968e76667130f38018ddcf0fcfd3b0
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53480
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Qian Yingjin [Thu, 7 Dec 2023 09:45:01 +0000 (04:45 -0500)]
LU-17289 test: disable sanity/test_906 temporarily
On the rhel9.3, the fio io_uring engine testing failed with error
"Operation not permitted" on both local file systems (Ext4 and
xfs) and Lustre:
"fio: pid=4551, err=1/file:engines/io_uring.c:1047,
func=io_queue_init, error=Operation not permitted"
This is a generic failure in rhel9.3.
Thus we disable sanity/test_906 temporarily until the bug is fixed
in rhel9.3.
Test-Parameters: trivial testlist=sanity clientdistro=el9.3
Signed-off-by: Qian Yingjin <qian@ddn.com>
Change-Id: I3805b475c5f3d0b62dc6c57c4cd93f2bc1b67b76
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53362
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Shaun Tancheff [Sat, 11 Nov 2023 01:40:22 +0000 (19:40 -0600)]
LU-17160 build: Use PyConfig_InitPythonConfig 3.11 and later
Python PEP https://peps.python.org/pep-0587 changed the python
initialization scheme and deprecated Py_SetProgramName() among
other functions.
As of python 3.11 the new init scheme is available.
Test-Parameters: trivial
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Ia7bdb63a74295ab8cf0313f16bfd03d78cf8fcf7
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52558
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Tue, 2 Jan 2024 00:11:35 +0000 (19:11 -0500)]
LU-10391 mgs: handle strscpy return value properly
The function strscpy() returns either an error code or the length
of the string copied. We need on success of strscpy in the
function mgs_steal_client_llog_handler() reset rc to zero to avoid
the return value been seen as an error. While we could use large
NIDs some functionality like nodemap was failing due to this
mishandling of the return code.
Fixes:
c0cb747ebe9 ("LU-13306 mgs: use large NIDS in the nid table on the MGS")
Test-Parameters: trivial
Change-Id: I013d34e0d0223367efea97f71dd4baa1052e2e1b
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53571
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
James Simmons [Sat, 23 Dec 2023 18:43:20 +0000 (13:43 -0500)]
LU-10003 lnet: implement Netlink version of lnet distance API.
Userland can query the distance of a peer using an ioctl. Move
this over to Netlink so we can support large NIDs for IPv6
handling.
Test-Parameters: trivial testlist=sanity-lnet
Change-Id: I090538e4cc55fd26bd61888de659b99bba85a111
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53556
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 23 Dec 2023 01:24:18 +0000 (18:24 -0700)]
LU-6142 build: ignore deleted lines for comment context
checkpatch should skip removed lines when checking comments context.
Otherwise, false "WARNING: memory barrier without comment" and other
messages can be reported when a comment exists on the previous line
but is hidden by the removed line.
For example, a change like below was previously incorrectly flagged:
/* matched by smp_store_release() in some_function() */
- if (smp_load_acquire(&list->tail) == head))
+ if (smp_load_acquire(&list->tail) == head) && flags == 0)
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ib0cd11e66a5b6a3c4505222eb89ff6479246023a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53543
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Mikhail Pershin [Wed, 13 Dec 2023 12:43:53 +0000 (15:43 +0300)]
LU-17365 lod: handle llog errors gracefuly
Distinguish remote llog errors by their source and type
in LOD lod_sub_prep_llog() and uniform errors reported
by llog_osd_read_header() and llog_init_handle.
- Partial llog header or 0-size llog is to be
reinitialized, new header is created
- in llog_read_header() dt_attr_get() and read_header()
thier errors are printed and returned as -EIO to caller
- llog with invalid llog header data is skipped and new
one is created to be used instead. To indicate that
the llog_init_handle() returns -EINVAL error code instead
of -EIO. Therefore network errors are to be handled by
lod_sub_recovery_thread() retry logic while bad llog
content will lead to immediate llog re-creation.
- lod_sub_init_llogs() tries to init all targets even
if some failed
- always recreate llogs after recovery abort no matter
if ctxt->loc_handle exists or not
Patch tries to cover known issues and types of error during
update log recovery and provides also better debug for
similar cases in future
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: I2705e0dc245ed4365123ce47137193a9ed769673
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53510
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Emoly Liu <emoly@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Thu, 4 Jan 2024 20:02:08 +0000 (15:02 -0500)]
LU-10391 tests: except sanity-lnet/253+254 due to failures
Moving to Netlink for ping support has exposed a timing issues
with some of the sanity-lnet test. Skip those tests temporarily
until the issue can be fixed.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: James Simmons <jsimmons@infradead.org>
Change-Id: Ia30fcbf8eca7baaf6f896e6e51229c69cea82804
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53593
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Oleg Drokin [Wed, 3 Jan 2024 18:17:29 +0000 (13:17 -0500)]
New tag 2.15.60
Change-Id: Iebcf2a80949d8d5d14a2e6aeb6582884b11d343f
Signed-off-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Fri, 20 Oct 2023 11:23:26 +0000 (14:23 +0300)]
LU-17215 tests: sanity/398q to use $tfile
tfile seems to be a typo
Fixes:
43c3a804fe2 ("LU-13805 tests: Add racing tests of BIO, DIO")
Test-Parameters: trivial
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I85b0afce577b708ef9e69747774bd248484bd9dd
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52772
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Mikhail Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Mon, 18 Dec 2023 13:59:30 +0000 (14:59 +0100)]
LU-17374 gss: get rid of rsi cache entries after req handle
RPCSEC init requests are kept in the rsi cache. While this is useful
during request processing involving upcall/downcall with userspace,
rsi entries are never used again once RPCSEC init requests have been
handled completely.
And keeping entries in the rsi cache has some impact on authentication
speed. When a new RPCSEC init request is received, the first step is
to check if there is a valid matching entry in the cache. It is never
the case, except if an authentication request is replayed, but GSS
rejects that anyway.
So we spend time browsing a cache from which we expect no match. Even
if the upcall cache mechanism takes this lookup opportunity to remove
invalid or expired entries, it is even better to remove cache entries
as soon as we know they are done.
Test-Parameters: kerberos=true testlist=sanity-krb5
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Ia9946578c3d3149e6235d832df28214ae8984f1e
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53488
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Jian Yu [Thu, 14 Dec 2023 18:35:00 +0000 (10:35 -0800)]
LU-17366 kernel: update SLES15 SP5 [5.14.21-150500.55.39.1]
Update SLES15 SP5 kernel to 5.14.21-150500.55.39.1 for Lustre client.
Test-Parameters: trivial mdtcount=4 mdscount=2 \
clientdistro=sles15sp5 testlist=sanity
Change-Id: Id9476e8726728b00d4079cdaf31b081f89190eb1
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53467
Reviewed-by: Colin Faber <cfaber@ddn.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Timothy Day [Thu, 14 Dec 2023 16:27:40 +0000 (16:27 +0000)]
LU-8802 obd: str2dev is missing obd_device_unlock()
class_str2dev() was missing an obd_device_unlock(). I haven't
seen any bugs related to this missing unlock. I suspect
the mount state machine avoids this. Add the unlock just
to be safe.
Fixes:
c5e5060d950 ("LU-8802 obd: remove MAX_OBD_DEVICES")
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I7a813f9d4931a7a9979223bfde5efea07f1e5228
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53466
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Sun, 10 Dec 2023 14:50:43 +0000 (09:50 -0500)]
LU-16823 lustre: test if large nid is support
Update all LNetGetId() calls to use large NIDs if the connect
flags report large NID support. For the case of lmv_setup()
we update setting qos_rr_index, to avoid the thundering herd,
using nidhash().
Change-Id: I80fda9454f154e27fbc75abb1899c0ccca03097b
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53398
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lei Feng [Sun, 10 Dec 2023 08:45:38 +0000 (16:45 +0800)]
LU-17352 utils: lljobstat can read dumped stats files
Improve lljobstat command to read dumped stats file.
Usually the file is generated by command:
lctl get_param *.*.job_stats > all_job_stats.txt
Multiple files can be specified with multiple --statsfile
options. For example:
lljobstat --statsfile=1.txt --statsfile=2.txt
Stats data from multiple files will be added up and
sorted. Then the top jobs will be listed.
Try to use CLoader to accelerate the YAML parsing.
Handle SIGINT and exit silently if lljobstat is in the loop
of reading system job_stats files periodically.
Fix a bug when the job_id is a pure number.
Signed-off-by: Lei Feng <flei@whamcloud.com>
Test-Parameters: trivial
Change-Id: Iee1ce69d2befb9d021e34effd4fc65a47297c1fb
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53397
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Sat, 9 Dec 2023 21:54:41 +0000 (21:54 +0000)]
LU-16751 build: remove symlinks and add SPDX
Remove commit-msg and prepare-commit-msg links
in the build/ directory. Add proper headers and
SPDX to the remaining files in build/.
Test-Parameters: trivial
Fixes:
25c93758d6 ("LU-1199 build: Clean out the build directory")
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I649ed60f5541be2832555efa2e0cf64cd1a5c67c
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53396
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Andreas Dilger [Wed, 20 Dec 2023 18:45:50 +0000 (11:45 -0700)]
LU-13791 mdt: parameter to tune capabilities
Add mdt.*.enable_cap_mask to allow specific capabilities to
be enabled and disabled individually.
Fixes:
f05edf8e2b ("LU-13791 sec: enable FS capabilities")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I6fc0130a90693d673d8c2158e7e31c2de951553d
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53538
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Thu, 7 Dec 2023 17:07:09 +0000 (18:07 +0100)]
LU-17317 gss: do not continue using expired reverse context
In case a server uses an expired gss context to send a callback
request to a client, it might be that the associated context on
the client has already expired, and been purged from the cache.
This results in a GSS_S_NO_CONTEXT reply.
In this specific scenario, the server must mark its reverse context
as dead. This will lead to destruction of the expired context, and
creation of a new context suitable for further callback requests.
Test-Parameters: kerberos=true testlist=sanity-krb5
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I4af90cd70a3815851ec555ea85b49714c8da4202
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53375
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Thomas Bertschinger [Tue, 31 Oct 2023 19:59:18 +0000 (13:59 -0600)]
LU-17245 utils: fix lfs error messages with multiple paths
When using some lfs utilities (find, getstripe) with multiple paths,
if a subset of the paths has an error, for example due to a typo, the
error message produced can be misleading. For "getstripe" it refers to
the last file on the command line regardless of which file had the
error, and for "find" it prints out the right filename but uses
the error code from the last file on the command line.
This cleans up these error messages for "lfs find" and
"lfs getstripe".
This also adjusts "lfs setdirstripe" to continue for subsequent files
if it encounters an error for earlier files on the command line.
Signed-off-by: Thomas Bertschinger <bertschinger@lanl.gov>
Fixes:
bc500536b6dd ("LU-930 utils: fix 'lfs find' error message")
Fixes:
4affa48f676b ("LU-5170 utils: Continue on error when multiple files requested")
Fixes:
a24f61532927 ("LU-11213 dne: add new dir hash type "space"")
Change-Id: I9cdd007912ffb4f6ebc31e422851977e49186ae7
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52942
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Stephane Thiell [Fri, 3 Nov 2023 04:24:26 +0000 (21:24 -0700)]
LU-16771 llite: add statfs_project tunable
Add a client tunable and mount option to turn off project-enabled
statfs() if needed, for example to speed up statfs() execution by
avoiding project quota check.
This new llite tunable statfs_project is set to 1 by default (feature
enabled). To turn statfs_project off:
lctl set_param llite.*.statfs_project=0
Additionally, statfs_project can be disabled at mount time with:
mount -t lustre -o nostatfs_project ...
Signed-off-by: Stephane Thiell <sthiell@stanford.edu>
Change-Id: I1c3eb27e66b1d05a1c713732dfe0a4d8f7af769f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52872
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Tue, 17 Oct 2023 18:06:39 +0000 (11:06 -0700)]
LU-17186 utils: replace gethostby*() with get*info()
This patch replaces the deprecated gethostbyname() and
gethostbyaddr() functions with getaddrinfo() and getnameinfo()
functions respectively.
The getaddrinfo() function combines the functionality provided by the
gethostbyname() and getservbyname() functions into a single interface,
but unlike the latter functions, getaddrinfo() is reentrant and allows
programs to eliminate IPv4-versus-IPv6 dependencies.
The getnameinfo() function is the inverse of getaddrinfo(): it
converts a socket address to a corresponding host and service, in a
protocol-independent manner. It combines the functionality of
gethostbyaddr() and getservbyport(), but unlike those functions,
getnameinfo() is reentrant and allows programs to eliminate
IPv4-versus-IPv6 dependencies.
Test-Parameters: kerberos=true testlist=sanity-krb5
Test-Parameters: testgroup=review-dne-selinux-ssk-part-2
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Iacb5583826cd2f7329455bc6cbb4477f9087f15a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52632
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Qian Yingjin [Mon, 10 Oct 2022 08:17:31 +0000 (04:17 -0400)]
LU-14361 statahead: regularized fname statahead pattern
Some applications do stat() calls under a directory within which
all children files have regularized file name:
- mdtest benchmark tool: mdtest.$rank.$i
- ML/AI with ingested data that have typically a format rule of
the filename in the directory.
The most common format for regularized file name is that the
suffix part of the file name is number-indexing.
However, in the current statahead mechanism, the statahead is
populated by the order of the hash of the file name via readdir()
calls, not a kind of sorting order.
In this patch, we improve the statahead to prefetch attributes for
the files with regularized indexing file name via asynchronous
batching RPC.
This patch adds the support to do statahead for these kinds of
applications, which can be optimized, but without opendir()/
close() to start/stop statahead thread explicitly.
Instead, the statahead thread will stop and quit when found
that there was no acitivy for more than a certain time period
(i.e. 30 seconds).
Test-Parameters: mdtcount=4 mdscount=2 testlist=sanity env=ONLY=27p,ONLY_REPEAT=5
Test-Parameters: mdtcount=4 mdscount=2 testlist=sanity env=ONLY=27p,ONLY_REPEAT=5
Test-Parameters: mdtcount=4 mdscount=2 testlist=sanity env=ONLY=123f,ONLY_REPEAT=10
Test-Parameters: mdtcount=4 mdscount=2 testlist=sanity env=ONLY=123f,ONLY_REPEAT=10
Signed-off-by: Qian Yingjin <qian@ddn.com>
Change-Id: Ide11ec5a651ae74884ddbe1cecede4f5c961e38d
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/41308
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Tue, 5 Dec 2023 07:38:12 +0000 (01:38 -0600)]
LU-9680 lnet: Empty route/peer table is not an error
lnetctl peer/route show command, without any other arguments, should
not return an error if the peer/route tables are empty. If the user
specifies a particular peer/route to show, and that peer/route does
not exist then this is an error.
Modify the dumpit routines to check the netlink message length to
determine whether the user supplied any arguments to the show
commands, and use this information to return the proper status. Some
dead code was also removed from lnet_route_show_dump().
We also fix an issue with older kernels where non-zero return status
from old dumpit commands was not being returned correctly.
Test-Parameters: trivial
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I9a188c573b0f373052208dbea52ea56181719769
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53366
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
James Simmons [Mon, 18 Dec 2023 21:02:38 +0000 (16:02 -0500)]
LU-10391 lnet: update ping to handle multiple NIDs
The original lnet ping Netlink code was setup to handle the pre-MR
API. Update this code to handle the newer MR version of ping. This
unifies all ping handling under one system and it supports larger
NID handling for IPv6. The big change is now that we support
updating the key table we can report failed pings in a different
format than the successful pings.
Instead of using the Netlink API version flag test if the passed
in LNet processid is LNET_PID_LUSTRE to display a NID or PID for
the ping results. Also cleanup the memory for failed ping NID
list.
Test-Parameters: trivial testlist=sanity-lnet
Change-Id: I77a0e313bf2b7035e501726068fd45bb3a118d06
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/49361
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Li Dongyang [Tue, 19 Dec 2023 01:00:15 +0000 (12:00 +1100)]
LU-17332 ldiskfs: do no update superblock after journal destroy
Trying to start a transaction after journal destroy
during umount will lead to a crash.
This patch is adding the same checks from
041340404e LU-16982 ldiskfs: Fix crash after "umount -d -f /mnt/..."
for el9 series.
Change-Id: Ibb89e9f5104b0980a8d9543561ac643322e3724d
Fixes:
e27a7b33d6 ("LU-16298 ldiskfs: Periodically write ldiskfs superblock")
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53499
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Vitaliy Kuznetsov <vkuznetsov@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 23 Dec 2023 07:19:02 +0000 (00:19 -0700)]
LU-17385 tests: always_except sanity-lfsck/24
Sanity test_24/26a started failing recently due to the landing of
new test_23d. Disable test_23d for now to avoid tests failing, but
do not remove it so that it is possible to continue debugging it.
Add extra debugging to see why this is happening.
Test-Parameters: trivial testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Test-Parameters: testlist=sanity-lfsck mdscount=2 mdtcount=4
Fixes:
07e02a600e ("LU-16826 tests: lfsck to repair a dangling remote entry")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ib6edf1d014ceb6b5d965aadc11272a88e8c001d5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53544
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Nathaniel Clark [Tue, 12 Dec 2023 18:05:22 +0000 (13:05 -0500)]
LU-17358 lprocfs: make job_stats job_id valid yaml
Fix quoting job_id to account for leading '@' being reserved.
Test-Parameters: trivial
Signed-off-by: Nathaniel Clark <nclark@whamcloud.com>
Change-Id: Ifce3edc9b636db2f059ab9960488972a152d2e7a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53424
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Feng Lei <flei@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Sergey Cheremencev [Sun, 3 Dec 2023 04:06:23 +0000 (07:06 +0300)]
LU-17349 tests: sanity-quota_81 decrease timeout
Decrease cfs fail timeout in sanity-quota_81 from 30
to 10 seconds to avoid soft lockup.
Fixes:
862f0baa7c21 ("LU-15097 quota: stop pool_recalc before killing pool")
Test-Parameters: trivial testlist=sanity-quota
Signed-off-by: Sergey Cheremencev <scherementsev@ddn.com>
Change-Id: I8630db7b3948b335fef5d5349f960f79cb877fc3
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53384
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Aurelien Degremont [Fri, 8 Dec 2023 12:34:09 +0000 (13:34 +0100)]
LU-17347 debs: also move .ddeb files into debs/
When building debian packages, the resulting packages are
moved into a 'debs/' subdir.
Don't miss the debug symbol packages 'dbgsym', which are
suffixed .ddeb.
Also add .buildinfo file.
Test-Parameters: trivial
Change-Id: I52d0bddfaafc67c4a2a2dbc786d7f320c0b979f8
Signed-off-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53378
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Tue, 5 Dec 2023 16:02:21 +0000 (17:02 +0100)]
LU-17317 gss: no cache flush for rsi and rsc
RPCSEC init and RPCSEC context caches hold gss-related information
of security contexts established between network peers. These cache
entries are tightly coupled with contexts handled in the sptlrpc layer
so they must not be purged directly. They are inserted into the cache
when sptlrpc security contexts are established, and removed when the
corresponding security contexts are destroyed.
Test-Parameters: trivial
Test-Parameters: kerberos=true testlist=sanity-krb5
Test-Parameters: testgroup=review-dne-selinux-ssk-part-2
Fixes:
8d828762d1 ("LU-17015 gss: support large kerberos token for rpc sec init")
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I903f75a4b5229286fcaed3e9d96b5eee7f653f15
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53377
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Jian Yu [Thu, 7 Dec 2023 00:52:50 +0000 (16:52 -0800)]
LU-17338 kernel: update RHEL 8.9 [4.18.0-513.9.1.el8_9]
Update RHEL 8.9 kernel to 4.18.0-513.9.1.el8_9.
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.8 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.8 testlist=sanity
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.8 serverdistro=el8.9 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.8 serverdistro=el8.9 testlist=sanity
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-1
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-2
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-3
Change-Id: Ied0d2873974a3c8cc6e346373457c8ebc09740d6
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53357
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Wed, 6 Dec 2023 08:15:18 +0000 (09:15 +0100)]
LU-17336 gss: fix __user pointer in rsi_upcall_seq_write
rsi_upcall_seq_write() uses sscanf to get the string passed from
userspace, but this needs to be copied to a kernel buffer first.
Test-Parameters: trivial
Test-Parameters: kerberos=true testlist=sanity-krb5
Test-Parameters: testgroup=review-dne-selinux-ssk-part-2
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I2ec875b7c6c158695857fe912ec1dd9f41ddc25d
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53342
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Tue, 5 Dec 2023 08:54:42 +0000 (14:24 +0530)]
LU-17000 utils: Check return value of yaml_parser_initialize
This patch adds return value checks to function
yaml_parser_initialize() and fopen() under lustre_cfg.c
And funciton cYAML_build_tree() under cyaml.c
Test-Parameters: trivial
CoverityID: 410239 ("Unchecked return value")
CoverityID: 410238 ("Unchecked return value")
Fixes:
65062463 (LU-14359 hsm: support a flatter HSM archive format)
Fixes:
8961f2d8 (LU-4939 utils: allow configuration through yaml files)
Change-Id: I67a34adee3e4d25f97244487684a613426637a70
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53331
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Hongchao Zhang [Sun, 26 Nov 2023 11:56:43 +0000 (19:56 +0800)]
LU-16097 quota: fix Null pointer dereference
The "qbody" should be checked whether it is NULL or not.
CoverityID: 410242 ("Dereference after null check")
Fixes:
57ac32a2 ("LU-16097 quota: release preacquired quota when over limits")
Signed-off-by: Hongchao Zhang <hongchao@whamcloud.com>
Change-Id: Idab61f3ebac24307c6d5db0d42429914858d21cb
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53330
Reviewed-by: Sergey Cheremencev <scherementsev@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Arshad Hussain [Fri, 1 Dec 2023 04:58:32 +0000 (23:58 -0500)]
LU-17000 lnet: Fix dereference after NULL under ksocknal_recv_hello
This patch fixes 'conn->ksnc_proto' which was
dereferenced under function ksocknal_recv_hello()
even though it could be NULL.
This patch also removes 'returns' in between
the function and replaces it with 'goto'.
Allowing exit from a single place.
CoverityID: 410244 ("Dereference after null check")
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Fixes:
cb5f92c0e (LU-10391 ksocklnd: use ksocknal_protocol v4 for IPv6)
Change-Id: I95196d481b537281ab8643f1ee6162db450bef20
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53305
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 30 Nov 2023 23:00:38 +0000 (16:00 -0700)]
LU-7328 misc: no non-ASCII characters in commit messages
Some commit messages have control characters, or fancy quotation
marks, or mdash hyphens or similar, and this messes up the display
of "git log" and other tools depending on the current locale and
character set used in the terminal.
Add a check into commit-msg to reject commit messages that have
non-ASCII characters. This does not apply to characters used in
the Signed-off-by: or similar fields that list people's names.
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I99d0954a68f8a5391195553ebf4b69181b6991f2
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53304
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Tue, 5 Dec 2023 20:45:44 +0000 (12:45 -0800)]
LU-17334 lov: handle object created on newly added OST
When a new OST is added to a filesystem without no_create,
then a new object created on the OST relatively quickly
after it is added to the filesystem, in particular because
the new OST would be preferred by QOS space balancing
due to lots of free space. However, it might take a few
seconds for the addition of the new OST to be propagated
across all of the clients, so there is a risk that the MDS
creates file object on OSTs that a client is not yet aware of,
which returns an error to the application immediately.
This patch fixes the issue by adding a loop in lsme_unpack()
that is waiting and retrying for some number of seconds for
the filesystem layout to be updated if either the
"loi->loi_ost_idx >= lov->desc.ld_tgt_count" or "!ltd"
condition is hit.
Change-Id: Idc29b8c66079afaea25428577daf51370fa2b084
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53335
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andrew Perepechko [Mon, 18 Dec 2023 18:19:26 +0000 (11:19 -0700)]
LU-14651 build: fix build for el7.9 kernels
Handle extra setattr_prepare() argument added in Linux 5.12 kernels
when building on older kernels.
HPE-bug-id: LUS-12059
Signed-off-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Change-Id: Ie7fd1c4d51b7a9b086cfca0db941321cbcce7057
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53503
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: Sebastien Buisson <sbuisson@ddn.com>
Tested-by: James Simmons <jsimmons@infradead.org>
Serguei Smirnov [Thu, 30 Nov 2023 18:55:11 +0000 (10:55 -0800)]
LU-17325 o2iblnd: CM_EVENT_UNREACHABLE on established conn
There were examples in the field with RoCE setups which demonstrate
that CM_EVENT_UNREACHABLE may be received when connection is already
in ESTABLISHED state. This causes an assert in kiblnd_cm_callback to
fail.
Handle this in a more gracious manner: report the event as unexpected
and allow the flow to continue. If there are indeed issues on
the connection, it is expected to report transaction errors later
and get cleaned up without crashing the whole system.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Change-Id: If32166fe9fc59e025609c2035cb1c03d3bed22f2
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53298
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sun, 26 Nov 2023 05:58:09 +0000 (22:58 -0700)]
LU-17251 osp: start OST object precreate earlier
If the OST object precreate count gets large (usually due to high
MDT file create workload, but sometimes also forced during testing)
then send an OST_CREATE RPC sooner when the number of precreated
objects gets low.
Currently the MDS will wait until 1/2 of the precreated OST objects
are consumed, but if create_count = 10000, then this can put bursty
create workloads on the OST. Instead, send an OST_CREATE RPC when
the precreate pool is at most 1024 objects below target, so that the
MDS keeps its precreated pool more full and the OST doesn't have to
create so many objects at once (which also locks object directories
for a longer time).
Don't set opd_force_creation=true when osp.*.create_count is set
larger, and instead rely on the improved precreate check to force
OST object creation to start sooner, as opd_force_creation=true
can cause the OSP precreation to stop completely in some cases.
Test-Parameters: testlist=sanity env=ONLY=1-130,HONOR_EXCEPT=y
Test-Parameters: testlist=sanity env=ONLY=1-130,HONOR_EXCEPT=y
Test-Parameters: testlist=sanity env=ONLY=1-130,HONOR_EXCEPT=y
Test-Parameters: testlist=sanity env=ONLY=1-130,HONOR_EXCEPT=y
Test-Parameters: testlist=parallel-scale env=ONLY=rr_alloc,ONLY_REPEAT=10
Test-Parameters: testlist=parallel-scale env=ONLY=rr_alloc,ONLY_REPEAT=10
Test-Parameters: testlist=parallel-scale env=ONLY=rr_alloc,ONLY_REPEAT=10
Test-Parameters: testlist=parallel-scale env=ONLY=rr_alloc,ONLY_REPEAT=10
Fixes:
df5b4c0a8b ("LU-17251 osp: force precreate if create_count grows")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Id2d12636d535485919ca5eec3adb18b1e6ce7057
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53245
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Fri, 24 Nov 2023 17:38:10 +0000 (17:38 +0000)]
LU-16502 lutf: remove lutf_start.sh wrapper script
Remove bash wrapper script lutf_start.sh. Set the environment
natively in Python. LUTF currently involves a number of nested
wrapper scripts. Hence, this patch aims to simplify LUTF.
It also makes it simplier to import this script into another
Python script, by providing a reusable function to set the
environment natively.
Test-Parameters: @lnet
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I56d80c12f9e50f3f8de1668ffa04c855a9829601
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53237
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Wed, 22 Nov 2023 17:56:17 +0000 (17:56 +0000)]
LU-16502 python: improve support for virtual environments
Python virutal environments make it easy to install the
correct Python packages isolated from the rest of the
system.
https://docs.python.org/3/library/venv.html
.venv is added to .gitignore and a simple virtual environment
example has been added to the README.
This patch collects all of the requirements for various
scripts in the Lustre tree and consolidates them in a
top level requirements.txt. lu_object.py spacing was
fixed due to parsing errors.
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I69d074e9ba50022817bd243fb82d004366ab6adf
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53209
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Tue, 21 Nov 2023 19:19:24 +0000 (19:19 +0000)]
LU-16502 lutf: add proper config option and fix bugs
LUTF did not have a proper configuration option. Since
no message was printed at configure time, this made it
hard to debug why LUTF was not being built.
Fix a few minor bugs in headers that prevented shared
libraries from being `import`ed by python.
Fix a small Clang error in liblutf_agent.c.
Test-Parameters: @lnet
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I6680b203bef08b7afa326a1cbe30c96b5c29e95c
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53200
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Mon, 20 Nov 2023 07:43:07 +0000 (13:13 +0530)]
LU-17000 utils: fix leak in 'lfs find' error handling
Fix memory leak reported by Coverity in
setup_indexes() in case of errors during
OST UUID initialization.
CoverityID: 397693 ("Resource leak")
Test-Parameters: trivial testlist=sanity,conf-sanity
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Fixes:
05334b90a5d ("LU-16331 utils: fix 'lfs find -O <uuid>' with gaps")
Change-Id: Ibfd10cebaf3198ae2e9bb35686be420e4cd0050b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53182
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Anjus George <georgea@ornl.gov>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Rick Mohr <mohrrf@ornl.gov>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Fri, 17 Nov 2023 18:14:15 +0000 (18:14 +0000)]
LU-14361 tests: add aheadmany to .gitignore
Add aheadmany to .gitignore.
Fixes: 5317f8a ("LU-14361 statahead: Add test for statahead advise")
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I1003200b7ed34e90d2aa0f75cb4c4f071eaeea04
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53173
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Sun, 5 Nov 2023 13:51:29 +0000 (16:51 +0300)]
LU-17261 lov: ignore broken components
if some component of a mirrored file is broken, it makes sense
to try another (possible valid) replica rather than give up
immediately.
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I32ea0efa90109f5159bf8b6c4e0efe1d543580c3
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52996
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Zhenyu Xu <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sun, 5 Nov 2023 05:44:02 +0000 (23:44 -0600)]
LU-17263 utils: 'lfs find -size' to use 512-byte units
Change the 'lfs find -size' argument to 512-byte blocks by default if
no unit is given. This better matches find(1) and avoids confusion
when converting "find" arguments to "lfs find". Accept the 'c' suffix
like find(1) to specify a number of characters (bytes).
Most users/scripts will specify a unit, so it is expected not to cause
significant upset with this change.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I3124e667acc06928f41a3d3006e1d9b4a43ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52994
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Anjus George <georgea@ornl.gov>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Mon, 4 Dec 2023 10:42:41 +0000 (04:42 -0600)]
LU-17137 utils: l_getidentity Coverity cleanup
Do not assign newmod a value past the end of the allocated
space. This can confuse coverity.
Instead only assign valid addresses (or NULL).
CoverityID: 410235 ("Memory - illegal access")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I767ed1273ebfab68d634b3ff22b81a4621405dd2
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53315
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Qian Yingjin [Thu, 7 Sep 2023 08:33:02 +0000 (04:33 -0400)]
LU-16762 statahead: wait until statahead thread quit
It must wait until statahead thread quit. After that, we can get
accurate hit/miss stats for stat() workload such as "ls -l".
Test-Parameters: trivial
Signed-off-by: Qian Yingjin <qian@ddn.com>
Change-Id: I902b299e039de6c584b386856fb3f7a8989eb73b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52302
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Sun, 27 Aug 2023 21:39:47 +0000 (03:09 +0530)]
LU-16796 lov: Change struct pool_desc to use kref
This patch changes struct pool_desc to use
kref(refcount_t) instead of atomic_t
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I3829de190ec148c2e087f6a0262bf3bb76c196af
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52122
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Hongchao Zhang [Fri, 24 Nov 2023 08:33:10 +0000 (16:33 +0800)]
LU-16397 test: check quota setting on QSD
In some case, the quota setting at QMT could not be transfered to
QSD in time, which could cause the test to fail.
This patch adds check on QSD after setting the quota limit by LFS.
Test-Parameters: trivial testlist=sanity-quota
Change-Id: Ia999317a36a0f97c1f66726cdc10e9edac3d8a53
Signed-off-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/49533
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sergey Cheremencev <scherementsev@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Tue, 5 Dec 2023 09:56:57 +0000 (03:56 -0600)]
LU-14810 lnet: Cancel discovery ping/push on shutdown
Discovery shutdown can race with ping and push events. In some cases
this can result in failing to unlink ping/push MDs on shutdown.
Protect against this by checking for PING/PUSH_FAILED state on peers
on the request queue.
Test-Parameters: trivial
Test-Parameters: testlist=sanity-lnet env=ONLY=500,ONLY_REPEAT=50
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I84a1f5beb6508651bc62e1dd93271f9e72f5081c
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53356
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Fri, 1 Dec 2023 10:20:22 +0000 (15:50 +0530)]
LU-14287 tests: Add 'fallocate' to racer
This patch adds fallocate(file_fallocate.sh)
under racer runs
Test-Parameters: trivial testlist=racer
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: I8e807bfc5c2b29dfb610a0b35e7083a9609517b0
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/41663
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Mon, 4 Dec 2023 21:14:53 +0000 (15:14 -0600)]
LU-10391 lnet: Ping target corrupted
If NIs with large NIDs are added then the discovery ping target
can become corrupted. This is due to a typo in
len_ping_target_install_locked(). Instead of writing the NI status to
the lnet_ni_large_status::ns_status field, we were instead writing the
status value 8 bytes into the lnet_ni_large_status (ns_status is
offset 8 into lnet_ni_status). This overwrites some of the struct
lnet_nid.
Test-Parameters: trivial
Fixes: db0fb8f ("LU-10391 lnet: allow ping packet to contain large nids")
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I7ccff7ae59feac5edc6a97a86c861ffbdb0bb333
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53320
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Alexander Boyko [Thu, 16 Nov 2023 22:57:24 +0000 (17:57 -0500)]
LU-17306 ofd: return error for reconnection
During the cleanup orphan phase, reconnection leads to unsynchronized
last id between MDT and OST. This means that MDT could assign non
existing objects to a client for a file create operation.
ofd_create_hdl()) capstor-OST0087: dropping old orphan cleanup request
MDS LAST_ID [0x2540000400:0xb6941:0x0] (747841) is 352 behind OST
LAST_ID [0x2540000400:0xb6aa1:0x0] (748193), trust the OST
recovery-small 144c reproduce bug where MDT lost synchronization
with OST.
Fixes:
63e17799a3 ("LU-8367 osp: enable replay for precreation request")
HPE-bug-id: LUS-11969
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I22c3d3b3db2acc9ad8f1b978b234afe7d3eef51d
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53195
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Zarochentsev [Mon, 15 May 2023 17:47:39 +0000 (13:47 -0400)]
LU-16826 tests: lfsck to repair a dangling remote entry
Testing how lfsck repairs a dir entry to a non-existing
Lustre object.
HPE-bug-id: LUS-11609
Test-Parameters: trivial testlist=sanity-lfsck fstype=ldiskfs mdscount=2 mdtcount=4 env=ONLY=23d
Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: I88dc8be98bacd2a199facfe3569567de6a713ff6
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/50998
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Mon, 28 Aug 2023 13:08:34 +0000 (21:08 +0800)]
LU-17048 mdd: protect layout change in MDD layer
We need to detect changes to the LOD layout in between transaction
declaration and when the objects are locked during transaction
execution. Otherwise, if another thread has modified the layout
of an object used by the transaction then the declaration may
be incorrect.
This patch save objects' layout generation in transaction delaration
phase, and check whether they have been changed by others in the
transaction execution phase, if that's the case, the transaction will
be retried for several times.
Fixes:
b7bd4e3422 ("LU-14621 mdd: fix lock-tx order in mdd_xattr_merge()")
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I25fe03c6e8fc4eebccc039e62dfc88db1179cb26
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52146
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Fri, 24 Nov 2023 07:34:20 +0000 (00:34 -0700)]
LU-17312 tests: skip conf-sanity test_53 in interop
Skip conf-sanity test_53 in interop because older servers cannot
stop any running service threads above threads_max.
Remove old test interop for servers < 2.3.
Test-Parameters: trivial testlist=conf-sanity
Test-Parameters: testlist=conf-sanity env=ONLY=53 serverversion=2.12
Fixes:
183cb1e3cd ("LU-947 ptlrpc: allow stopping threads above threads_max")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ia95405060c607c7a070720ed32a7a43b1c3ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53226
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Sarah Liu <sarah@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Wed, 22 Nov 2023 15:29:58 +0000 (10:29 -0500)]
LU-16739 uapi: restore LUSTRE_NODEMAP_NAME_LENGTH in lustre_disk.h
sanity test 400b fails with:
lustre_disk.h:266:18: error: 'LUSTRE_NODEMAP_NAME_LENGTH' undeclared here (not in a function)
char ncr_name[LUSTRE_NODEMAP_NAME_LENGTH + 1];
This is due to the move of LUSTRE_NODEMAP_NAME_LENGTH to lustre_idl.h.
Move it back and this time add a message to avoid this in the
future.
Test-Parameters: trivial
Fixes:
8d828762d1 ("LU-17015 gss: support large kerberos token for rpc sec init")
Change-Id: I5479bbf13f26bfd3b4f6e5f7c0c1688d810fca53
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53208
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Tue, 21 Nov 2023 15:10:51 +0000 (20:40 +0530)]
LU-17057 tests: Fix sanity-sec/0
Command executed through 'runas' on failure breaks
out of running test script. While this failure is
expected. The setting of 'set -e' forces the pipeline
to exit the running script immediately. This patch
fixes this by checking the return value and then
taking the appropriate action.
This patch also fixes 'touch' command to file f4 by
correctly calling it via uid and gid as it was set
few lines above.
Test-Parameters: trivial testlist=sanity-sec env=ONLY=0,ONLY_REPEAT=100
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I06e6d22840e31add8c24cf90c31b98464d580ae7
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53194
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Zarochentsev [Tue, 21 Nov 2023 23:15:06 +0000 (23:15 +0000)]
LU-17301 utils: l_getidentity build fix
The extra shared libs dependencies have an effect on
the l_getidentity libtool wrapper script created
in the source directory. The wrapper script fails
if it is executed as an identity upcall by a Lustre
md server, as it uses some of the core linux utilities
from /bin:
l_getidentity: line 150: ls: command not found
l_getidentity: line 197: rm: command not found
l_getidentity: line 211: rm: command not found
l_getidentity: line 212: mv: command not found
l_getidentity: line 213: rm: command not found
Removing the unnecessary build dependencies fixes
the issue.
Test-Parameters: trivial
Fixes:
5f9f92454e ("LU-16901 utils: l_getidentity with nss module support")
Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: Ib8b83d5610a4d91ebb556406b563ca16e59dce76
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53191
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Andreas Dilger [Tue, 21 Nov 2023 01:07:04 +0000 (18:07 -0700)]
LU-13138 tests: improve sanity/101d 'dd' parsing
If 'dd' takes a long time to complete, or if it finishes in an
exact number of seconds, it will not print a decimal point, so
the current regexp will fail to detect the runtime.
Improve test_101d to allow parsing the 'dd' runtime in this case.
Test-Parameters: trivial testlist=sanity env=ONLY=101d,ONLY_REPEAT=100
Fixes:
43ebfad490 ("LU-13138 tests: measure 'dd' time more accurately")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Icb030467c76947d0546916e11a91e5afb33ebbe5
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53188
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Shaun Tancheff [Wed, 18 Oct 2023 09:37:21 +0000 (04:37 -0500)]
LU-17131 ldiskfs: el9.2 encdata and filename-encode
Add encryption support for el9.2
Test-Parameters: serverdistro=el9.2 testlist=sanity
Test-Parameters: serverdistro=el9.2 testlist=conf-sanity
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Iacda4c0e4107bccb57aece2e8d9cee12a4bcd09b
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53077
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Wed, 1 Nov 2023 06:50:53 +0000 (12:20 +0530)]
LU-17000 gss: Fix Out-of-bounds access under svcgssd_proc.c
Problem reported by coverity was passing 32bit type and
then dereferencing to larger 64bit under function
handle_channel_request(). This patch address this issue.
Since this is an uapi and to catch corner cases like
kernel modules being updated separately from user tools
RSI_DOWNCALL_MAGIC is also changed from 0x6d6dd62a to
0x6d6dd63a.
This patch also changes 32bit member (sid_hash) of
'struct rsi_downcall_data' to 64bit. Which also requires
changing of wiretest.c and wirecheck.c
CoverityID: 404758 ("Out-of-bounds access")
Fixes:
8d828762d1 ("LU-17015 gss: support large kerberos token for rpc sec init")
Test-Parameters: kerberos=true testlist=sanity-krb5
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I8041cd4063f1b1cefdebf5681df426be61820f99
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52920
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Serguei Smirnov [Tue, 31 Oct 2023 21:11:54 +0000 (14:11 -0700)]
LU-16859 lnet: incorrect check for duplicate NI
When NI is being added to an existing LNet, checking against
existing NI interface names currently fails if the new NI
happens to use interface name which is a prefix of one used
by an existing NI.
The following example assumes ib0 and its alias ib0:1 are
configured:
lnetctl net add --net o2ib --if ib0:1
lnetctl net add --net o2ib --if ib0
Fix this by making sure interface strings are compared properly
regardless of relative length.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Change-Id: I0d4047118e7d9982fa791a2e324a27aa5d4abaee
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52918
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Wed, 11 Oct 2023 13:29:46 +0000 (15:29 +0200)]
LU-17015 sec: fix PTLRPC_CTX_STATUS_MASK
PTLRPC_CTX_STATUS_MASK should not include PTLRPC_CTX_NEW_BIT, which is
a bit index and not a value. Also, according to code in
sptlrpc_req_refresh_ctx():
if (unlikely(test_bit(PTLRPC_CTX_NEW_BIT, &ctx->cc_flags))) {
if (ctx->cc_ops->refresh)
ctx->cc_ops->refresh(ctx);
}
a context needs to be refreshed if it has the PTLRPC_CTX_NEW_BIT bit.
So the function to check if context is refreshed, cli_ctx_is_refreshed
should not return true if the PTLRPC_CTX_NEW_BIT bit is set.
In the end, do not replace PTLRPC_CTX_NEW_BIT with anything else in
PTLRPC_CTX_STATUS_MASK. Having PTLRPC_CTX_NEW_BIT was a no-op (bitwise
OR with 0), but this was working as expected. Just cleanup the code to
avoid headaches.
Test-Parameters: trivial
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Ibc2ca9dfaa176b098080f7f2867338b62953b50e
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52629
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Mon, 25 Sep 2023 14:28:51 +0000 (10:28 -0400)]
LU-17144 mdt: set dmv by setxattr
Client side: convert setxattr("trusted.dmv") to "setdirstripe -D", as
will help restore directory default LMV from backup.
Server side: add a tunable to enable setxattr("trusted.dmv"), it can
be turned on by "lctl set_param -n mdt.*.enable_dmv_xattr=1". It's
off by default. Since empty buffer can be set by setxattr, add check
in server code to avoid crash.
Add sanity 413j.
Test-Parameter: serverversion=2.14 mdtcount=4 testlist=sanity env=ONLY=413j
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I27d784998a9c4a182b4fffb8b06c84e9d9190919
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52510
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Sebastien Buisson [Thu, 14 Sep 2023 12:23:07 +0000 (14:23 +0200)]
LU-17015 gss: remove legacy sunrpc-cache based gss caches
Now that GSS caches are based on Lustre's internal upcall cache
mechanism, we can remove the legacy ones based on the sunrpc cache
implementation, as this code is unused.
We can also remove support for updated get_expiry() in Linux 6.3, as
this function is no longer used.
Test-Parameters: trivial
Test-Parameters: kerberos=true testlist=sanity-krb5
Test-Parameters: testgroup=review-dne-selinux-ssk-part-2
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I98d8777d225c723ae061ef360011abfc092e09d8
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/52376
Reviewed-by: Aurelien Degremont <adegremont@nvidia.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Shaun Tancheff [Sun, 17 Sep 2023 16:48:47 +0000 (11:48 -0500)]
LU-16967 build: Separate lnet LND rpm packaging
Enable separate packaging of lnet lnd kernel modules into
separate packages.
Use --with multiple_lnds to enable separate packages for
lnet lnds:
[always builds]: kmod-lustre-lnet-socklnd for socklnd.ko
--with o2ib: for kmod-lustre-lnet-in-kernel-o2iblnd
ko2iblnd.ko -> in-kernel-ko2iblnd.ko
--with mofed: kmod-lustre-lnet-o2iblnd for ko2iblnd.ko
--with kfi: kmod-lustre-lnet-gnilnd for kgnilnd.ko
--with gni: kmod-lustre-lnet-kfilnd for kkfilnd.ko
Test-Parameters: trivial
HPE-bug-id: LUS-11711
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: If2dace7ced96be2a2194f66362e9419b017c625f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/51692
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Fri, 10 Nov 2023 06:22:31 +0000 (00:22 -0600)]
LU-16967 build: Add in-kernel-ko2iblnd driver
Add in-kernel-ko2iblnd.ko for users of in-kernel OFED
and only build ko2iblnd.ko if an external OFED is available
This allows for building and packaging both an external
(MOFED or OPA) o2ib driver and an in-kernel o2ib driver.
Packaging rules will be written so that only enable one
of the o2iblnd drivers can be installed.
In the case of the in-kernel-ko2iblnd.ko driver a symlink
named ko2iblnd.ko will be created to point to the in-kernel
based o2ib driver which allows for a reasonable migration path
for the majority of users.
It is useful for dist build and test to be able to build
both in-kernel IB and external OFED in the same build.
This also means there would be some install/configure
adjustments that ought to have some discussion.
Test-Parameters: trivial
HPE-bug-id: LUS-11711
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I8105fad0b20c36705d7e14e3ae976bf3d81e9f1b
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/51915
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Dmitry Ivanov [Mon, 16 May 2022 18:15:19 +0000 (12:15 -0600)]
LU-10283 mdd: fix parent FID in changelog of striped directory
Changelog entry for the file operations such as create, rename,
link, unlink, mkdir referred to parent FID ("p=") as a shard's
FID in a striped directory. The same was true for the source's
parent FID ("sp="). This commit hides the Lustre intrinsics from
user displaying the parent's directory FID instead as expected.
An object might be in a remote MDT, in which case obtaining the parent
FID via the linkEA can be an expensive operation, so the parent FID is
cached in the mdd_object, so that the cost of the cross-MDT RPC is
amortized over the lifetime of the object.
Certain userspace tools might depend on the previous behavior of
displaying the shard's parent FID in the changelog records, so this
canp be enabled by setting mdd.*.enable_shard_pfid=1, if this is
required for compatibility.
HPE-bug-id: LUS-10721
Signed-off-by: Dmitry Ivanov <dmitry.ivanov2@hpe.com>
Change-Id: Iae15b49f5852f36ba62ae1706d3a5f4ebf307bc4
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/51322
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Patrick Farrell [Fri, 31 Mar 2023 21:33:40 +0000 (17:33 -0400)]
LU-16695 llite: switch to ki_flags from f_flags
There are possible races between IO checking f_flags and
fcntl changing f_flags. The kernel fixed most of these by
copying most of the file flags in to the iocb.
Let's follow on and use those copied flags. This also lets
us change them if we want, since they're now local to the
specific IO.
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Signed-off-by: Guillaume Courrier <guillaume.courrier@cea.fr>
Change-Id: Ib98cccec0e7888865ec10dc5f76f1d9917a1aef7
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/50493
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Etienne AUJAMES <eaujames@ddn.com>
Timothy Day [Tue, 28 Nov 2023 17:46:35 +0000 (17:46 +0000)]
LU-17322 auster: move functions to test-framework.sh
auster is essentially a wrapper around
test-framework.sh. It's more sensible for functions
to be defined in the test library rather than a test
wrapper. A comment in auster even suggests this.
This small refactor will make it easier to write
alternative testing wrappers.
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: Ia10a44396f81f0423c9c15cc9779658292bc739f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53271
Tested-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Sun, 31 Jul 2022 14:06:08 +0000 (10:06 -0400)]
LU-10973 lutf: Fix order of linking for python modules
LUTF normally works but in some test cases at startup we got:
ImportError: lustre/test/lutrf/src/_lnetconfig.so:
undefined symbol: lustre_lnet_del_ni
If you check the symbol is there. The issue is the linking order.
We need to put the generated module name before all its
dependencies.
Also, remove cfs_expr_list_match from string.h, move the definition
to nidstrings.c, and make it static.
Test-Parameters: @lnet
Change-Id: Ia57fbd9d5795d845ea14bc1416f968383afcba2b
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Timothy Day <timday@amazon.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/46478
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 23 Nov 2023 22:56:00 +0000 (15:56 -0700)]
LU-16032 tests: restore delay_unlink_mb in sanity/360
Restore the original value of osd-ldiskfs.*.delay_unlink_mb after
sanity test_360 is finished, so that it doesn't have an impact on
later tests running, in particular sanity-quota.sh was seeing some
delay in freeing quota for files that were just deleted.
Test-Parameters: trivial testlist=sanity-quota
Fixes:
a772e90243 ("LU-16032 osd: move unlink of large objects to separate thread")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I7c1ab02262afdef2fc51f9fbc3932d954a4f8304
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53218
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Artem Blagodarenko <ablagodarenko@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Timothy Day [Wed, 22 Nov 2023 20:23:41 +0000 (20:23 +0000)]
LU-6142 misc: add editorconfig file
EditorConfig is a unified configuration file recognized
by dozens of different text editors. This patch adds a
very simple config.
https://editorconfig.org/
There is an upstream patch discussing editorconfig:
https://lkml.org/lkml/2023/6/1/196
This patch aims to be much simpler. EditorConfig must
be enabled for many common editors (Emacs, Vim) and
is enabled by default (but can be disabled) for other
editors (NeoVim).
Test-Parameters: trivial
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I264377f96d6d155f92336083160a392edfc79a4f
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53211
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Wed, 22 Nov 2023 00:26:52 +0000 (19:26 -0500)]
LU-10391 ptlrpc: update import debugfs to support IPv6 formats
When mounting with IPv6 NIDs setting the connection will fail with
LustreError: (lproc_ptlrpc.c:1417:ldebugfs_import_seq_write()) config: wrong instance # d967@tcp::1
This is due to IPv6 NIDs being able to contain "::" which is used
as a delimiter. Update the code to search for '@' which is unique
for the NID and then look for "::". For reading the import we need
to quote all the NID strings to make it valid YAML.
This changes the import output from:
import:
name: lustre-MDT0000-mdc-
ffff96c7070a2800
target: lustre-MDT0000_UUID
state: FULL
....
connection:
failover_nids: [ 10.37.248.15@tcp, 192.168.1.100@tcp ]
current_connection: 10.37.248.15@tcp
connection_attempts: 1
generation: 1
in-progress_invalidations: 0
idle: 64 sec
....
to the following:
import:
name: lustre-MDT0000-mdc-
ffff96c7070a2800
target: lustre-MDT0000_UUID
state: FULL
....
connection:
failover_nids: [ "10.37.248.15@tcp", "192.168.1.100@tcp" ]
current_connection: "10.37.248.15@tcp"
connection_attempts: 1
generation: 1
in-progress_invalidations: 0
idle: 64 sec
....
Change-Id: Ie68d544d8733b87d04fa0c2385de2319696b3289
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53117
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Feng Lei <flei@whamcloud.com>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Nathaniel Clark <nclark@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Rajeev Mishra [Tue, 4 Apr 2023 00:42:28 +0000 (00:42 +0000)]
LU-17025 llapi: Verify stripe pool name
Verify the pool exists when setting a stripe within a pool.
This avoids situations where the user specifies a missing
or invalid pool and an invalid stripe is created
test changes: Ensure pool exist before use
ost-pools.sh:
the test_6 test_7c and test_32 created pool before
calling setstripe -p
sanity-pfl.sh:
test_14 created pool before using it
sanity-flr.sh:
Test test_0b, test_0c, test_0e and test_0f
modified to create pool before using it
Test-parameters: trivial testlist=ost-pools,sanity-pfl,sanity-flr
HPE-bug-id: LUS-11510
Fixes:
cd1f8527d414 ("LU-14645 utils: optimise setstripe")
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Change-Id: I146bc6f886cd083b318dc9ea2e5d1943955bd7d6
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/51963
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Wed, 26 Jul 2023 10:17:47 +0000 (18:17 +0800)]
LU-16837 lustre: avoid the same member name
There are several structures using the same member name, such as
cl_ladvise_io::li_flags, layout_intent::li_flags and
lfsck_instance::li_flags, and this makes it hard to find where it
is used.
This patch renames some structures member prefix to avoid the
homonyms.
Test-Parameters: trivial
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: Ie592afa06dd0abf0c1110843e5d8007a91c68145
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/51766
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Sat, 4 Nov 2023 13:32:59 +0000 (09:32 -0400)]
LU-17307 mdt: get dirent count by request
Add MA_DIRENT_CNT/LA_DIRENT_CNT to notify osd to get dirent count.
Set it in mdt_getattr_name_lock() and when auto-split is enabled so it
won't cause overhead when auto-split is disabled, and change
oo_dirent_count type to atomic_t so the result does not become
inaccurate over time from repeated addition/removal (which may
be used to know whether directory is empty or compare directories in
the future).
In osd_dirent_count() set oo_dirent_count to 0 before iteration to
avoid multiple threads iterate at the same time, which means the
result may not be accurate in this case, but it will be eventually.
Fixes:
03a4431dac ("LU-11025 osd: osd_attr_get() returns dirent count")
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I2be6c0dcfda1c98995a269585c5d8d781a8a3b42
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53229
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Sergey Cheremencev [Sun, 5 Nov 2023 00:37:54 +0000 (04:37 +0400)]
LU-17046 tests: fix write success in 1g
Increase latest write count in 3 times. This may
happen that the previous write didn't write requested
amount of data. For example, if it had to write 20MB, but
wrote only 17, the final write need to write at least 3MB
to hit EDQUOT. If there are only 2 OSTs it writes only
19MB(17+2) and can't hit EDQUOT.
Test-Parameters: trivial testlist=sanity-quota
Test-Parameters: trivial testlist=sanity-quota
Test-Parameters: trivial testlist=sanity-quota
Signed-off-by: Sergey Cheremencev <scherementsev@ddn.com>
Change-Id: Ice5152fa4ba8504eda2ea5513201e340c5ff6220
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53038
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Timothy Day <timday@amazon.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Timothy Day [Fri, 17 Nov 2023 18:24:47 +0000 (18:24 +0000)]
LU-16518 lnet: fix uninitialized variable in api-ni.c
Fix new Clang error in api-ni.c:
warning: variable 'lpni' is used uninitialized whenever
'if' condition is false [-Wsometimes-uninitialized]
Fixes: f0be006 ("LU-9680 lnet: collect data about peer_ni by using Netlink")
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Timothy Day <timday@amazon.com>
Change-Id: I0895f02aaeb4fbb3b40a6927e77b8f02cfb3bfe8
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53174
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Thu, 16 Nov 2023 20:12:59 +0000 (12:12 -0800)]
LU-17293 kernel: update SLES15 SP5 [5.14.21-150500.55.36.1]
Update SLES15 SP5 kernel to 5.14.21-150500.55.36.1 for Lustre client.
Test-Parameters: trivial mdtcount=4 mdscount=2 \
clientdistro=sles15sp5 testlist=sanity
Change-Id: I5a9afb313e9bf315ef4af5b6602785ee68c4c247
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53156
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Deiter <alex.deiter@gmail.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Wed, 8 Nov 2023 10:32:55 +0000 (05:32 -0500)]
LU-17280 scrub: skip dir stripes with OI
After fresh mount and LFSCK start all directory stripes
are added to inconsistent list. So scrub for all stripes
would print LFSCK message "inconsistent OI FID...fixed.
Lets check FID to OI mapping before adding to inconsistent
list.
Also fixing additional debug for scrub.
HPE-bug-id: LUS-11777
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I869f1cf71eb6c10f386a3f388a38032c73d2b41a
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53078
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Mon, 20 Nov 2023 18:46:20 +0000 (10:46 -0800)]
LU-17275 kernel: RHEL 8.9 client and server support
This patch makes changes to support RHEL 8.9 release
with kernel 4.18.0-513.5.1.el8_9 for Lustre client and server.
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.8 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.9 serverdistro=el8.8 testlist=sanity
Test-Parameters: trivial fstype=ldiskfs mdtcount=4 mdscount=2 \
clientdistro=el8.8 serverdistro=el8.9 testlist=sanity
Test-Parameters: trivial fstype=zfs mdtcount=4 mdscount=2 \
clientdistro=el8.8 serverdistro=el8.9 testlist=sanity
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-1
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-2
Test-Parameters: optional clientdistro=el8.9 serverdistro=el8.9 \
testgroup=full-part-3
Change-Id: Ia3672d134534b877bb6aaffb4cea0339bc55974f
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53071
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Mon, 13 Nov 2023 17:03:02 +0000 (09:03 -0800)]
LU-17274 kernel: new kernel [RHEL 9.3 5.14.0-362.8.1.el9_3]
This patch makes changes to support new RHEL 9.3 release
for Lustre client.
Test-Parameters: trivial env=SANITY_EXCEPT="906" \
mdtcount=4 mdscount=2 clientdistro=el9.3 testlist=sanity
Test-Parameters: optional clientdistro=el9.3 testgroup=full-part-1
Test-Parameters: optional clientdistro=el9.3 testgroup=full-part-2
Test-Parameters: optional clientdistro=el9.3 testgroup=full-part-3
Change-Id: I9cce1a7d2249cb4df39106c44ba4417411ee0757
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/c/fs/lustre-release/+/53054
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
git://git.whamcloud.com / fs / lustre-release.git / log