-2001-06-29 18:15 PDT rzahir
+2002-06-25 Peter Braam <braam@clusterfs.com>
- * obdfs/flushd.c: conditionalized number of C_DEBUG messages.
- * include/linux/obd_class.h: added obd_devicename member to
- struct obd_device (name is either ptr to dentry or uuid).
- * ext2obd/ext2_obd.c: setup() converts dentry into rdev number.
- class/class_obd.c: setup() converts name into obd_device dentry
- class/obdcontrol: setup() passes /dev/obd name into ioctl
- (used to be rdev number and if invalid rdev number was passed
- old ext2_obd.c would crash kernel when trying to read superblock).
- * class/obdcontrol: added "status, procsys, script, insmod, rmmod,
- lsmod, shell and close" commands for obdcontrol. This allows
- easier scripting from within obdcontrol. Introduced ability to
- maintain multiple open obd devices from a single obdcontrol
- session. Device command toggles device context. Obdcontrol
- maintains multiple open file handles. "script <file>" command is
- useful for "sourcing" scripts without leaving obdcontrol.
- shell <command> allows any shell command to be executed from
- within obdcontrol.
- * class/proc_lustre.c: added support for /proc/lustre/obd/<n>/status.
- These are read-only /proc entries that track /dev/obd<n>
- internal state.
- * obdtrace/* & include/linux/obd_class.h: obd_trace a logical obd
- module useful for tracing and performance debug of the Lustre
- obd protocol stack. obdtrace module creates
- /proc/lustre/obd/<n>/stats file. Reading this /proc file shows
- per OBD performance statistics. Any write to this /proc file
- resets the counters for this OBD.
- * scripts/obdtrace_demo.scr: Example of obdtrace that
- takes advantage of new obdcontrol functionality.
- * doc/obdtrace_demo.txt: shows obdtrace capabilities.
-
-
-2000-03-06 12:33 adilger
-
- * obdfs/ext2_obd: added punch/truncate methods
-
-2000-01-26 01:40 adilger
-
- * obdfs/flushd.c: removed iput() from dequeue routine, since we no
- longer remove the inodes from the list in this routine, rather
- waiting to do it in flush_reqs, which also does a iput()
-
-2000-01-25 12:55 adilger
-
- * obdfs/super.c: add call to flush pages when unmounting filesystem
- * obdfs/flushd.c: pass "check_time" parameter to flush routines
- * obdfs/namei.c: fixed rename call to getpage to use offset, not index
- * snap/*: tested snapshots with new vector I/O, async writes - OK
- * tests/snaprun.sh: small script to step through testing of some
- snapshot features
-
-2000-01-24 18:55 braam
-
- * obdfs/rw.c: fixed obdfs_getpage() to use page index, not offset
- * obdfs/rw.c, flushd.c: added superblock lock for inode/page lists,
- added new iget()/iput() on all inodes in page cache to prevent
- them from being flushed from memory while waiting for write.
-
-2000-01-22 02:55 adilger
-
- * flush daemon testing/debugging - inode list still needs a lock
- * snapshot compiles with vector I/O now - untested
-
-2000-01-20 18:05 adilger
-
- * add dirty inode list to superblock
-
-2000-01-20 11:50 adilger
-
- * ext2obd/ext2obd.c: fixed brw I/O to have array of iobufs, not pointer
- * obdfs/super.c: add superblock to list of superblocks
- * obdfs/flushd.c: use pupdated() to do page writes
-
-2000-01-19 18:05 adilger
-
- * ext2obd/ext2obd.c: changed _brw to use vector I/O with brw_kiovec()
- * obdfs/rw.c, obdfs/flushd.c: updated for async page cache
-
-2000-01-18 20:20 adilger
-
- * class/obdcontrol: fixed read, write, create to work with obdos
- (write is still not fully functional)
- * ext2obd/ext2obd.c: ext2obd_write() - copy inode data back into obdo
- add a few missing iput()s for error conditions
-
-2000-01-18 13:30 adilger
-
- * modified _brw method to allow array of obdos to be submitted for
- multiple I/Os with one call
-
-2000-01-18 11:30 adilger
-
- * include/obd_support.h: removed printk() of long long values
- (sometimes does not print properly)
- * obdfs/rw.c: added obdo_from_inode() call in obdfs_brw(), as inode
- was not properly being copied into obdo, causing occasional confusion
- * snap/snap.c: always copy back obdo data to primary from disk obdo
- * obdsync/*: removed from CVS
-
-2000-01-14 08:05 adilger
-
- * snap/*: obdo snapshots should be working now.
-
-2000-01-13 13:50 adilger
-
- * snap/*: working on storing obdmd outside of inode
-
-2000-01-11 14:25 adilger
-
- * snap/*: updated to work with new obdo methods, untested
-
-2000-01-10 10:37 adilger
-
- * obdfs/*, ext2obd/*: updated to work with new obdo methods, tested
-
-1999-12-29 13:57 adilger
-
- * obdsync/*: added to CVS
- * obdfs/super.c,rw.c: added start of page cache
-
-1999-12-29 10:20 adilger
-
- * ext2obd/ext2_obd.c, snap/snap.c: change parameters for create
- * class/obdcontrol: update copy, migrate dst & src parameter order
-
-1999-12-23 14:21 adilger
-
- * demos/snaprest.sh: ensure client is disconnected after snaprestore
- * class/class_obd.c: debugging for connection counts, made error
- returns more consistent, check connections when doing cleanup
-
-1999-12-23 03:10 adilger
-
- * ext2obd/ext2_obd.c: added iput() after reading a bad inode,
- remove EXT2_UNDEL_DIR_INO from list of iterated inodes.
- * class/obdcontrol: after snaprestore remove snapshot from
- table by key not index
-
-1999-12-22 13:44 adilger
-
- * demos/snaprest.sh: mount /dev/obd2 on /mnt/obd at end of restore
-
-1999-12-22 13:11 adilger
-
- * snap/snap.c: always try to collapse an object in snap_restoreobj()
- * demos/snaprest.sh: need to rework snaprestore process
- * demos/basesetup.sh: check if /dev/obd* exist
- * demos/baseclean.sh: don't remove temp file
-
-1999-12-22 08:43 adilger
-
- * demos/obdtest.sh: added new script
-
-1999-12-21 18:03 adilger
-
- * class/obdcontrol: added "basedev" parameter to the attach command
- for ext2_obd. This was required after the removal of Filesystem()
- * demos/*: moved test scripts here, renamed by function
-
-1999-12-21 17:03 adilger
-
- * class/obdcontrol: merge snapattach into attach, fix scsi_obd packing
- * snap/cleanup.sh: use ../class/cleanup.sh like snap/setup.sh does
-
-1999-12-21 00:41 braam
-
- * doc/obd-howto.sgml: numerous edits
- * class/obdcontrol: make things clearer (no implicit filesystem)
- * change to our official MAJOR (186).
-
-1999-12-20 17:03 adilger
-
- * doc/obd-howto.sgml: added issues/bugs section
- * snap/test*.sh: added brief comments to each script
-
-1999-12-20 16:08 adilger
-
- * doc/obd-howto.sgml: updated for initial public release
- * obdfs/many: changed to have separate dir/file operations,
- * ext2obd/ext2_obd: cosmetic changes to match ext2 code more closely
- * include/linux/obd_class.h: change obdo_{cpy,cmp}_md() to allow
- include or exclude flags for copy/compare of metadata
- * snap/snaptable.c: comment iterator functions clearly
-
-1999-12-17 10:20 adilger
-
- * include/linux/obd_sim.h: renamed to obd_ext2.h
- * Configure: revert PCI, APIC checks (otherwise won't compile after
- config)
-
-1999-12-17 08:45 adilger
-
- * doc/obd-howto.sgml: completed OBD tutorial section
- * snap/snap.c: in eliminate_obj() turn off S_IFDIR flag on object
- before passing to underlying obdext2 driver, so it doesn't
- decrement the dir count for the group
- * Configure: removed questions for PCMCIA specific features
- * class/obdcontrol: disconnect session when changing devices
-
-1999-12-14 20:32 adilger
-
- * include/linux/obdfs.h: add symlink_inode_operations, prototypes
- * obdfs/symlink.c, obdfs/namei.c: handle obdfs symlinks properly
-
-1999-12-13 17:55 adilger
-
- * snap/snap.c, class/obdcontrol: added support for snapshot restores
- on unmounted OBD filesystems
- * snap/setup3.sh, snap/cleanup3.sh: scripts to test 3 snapshots
- * include/linux/obd_snap_support.h: iterator struct/function prototypes
-
-1999-12-13 09:30 adilger
-
- * all: significant overhaul by Peter to avoid problems with OBD
- metadata conflicting with ext2 block data in the inode.
- * class/obdcontrol: added proper commands for snapdelete/snaprestore
- * class/obdcontrol: device command now disconnects old session if any
- * ext2obd/*: updated for kernel 2.3.30
- * include/linux/obd_class.h: helper functions inode metadata cpy/cmp
- * include/linux/obd_snap.h: new magic less likely for block conflict
- now that the redirector can have "i_blocks" set
- * obd/obdfs: updated for kernel 2.3.30
- * snap/snap.c: use new obd metadata copy helper routines
- * snap/snap.c: updated delete/restore snapshot iterator functions
-
-1999-12-08 21:42 adilger
-
- * snap/snap.c: snap_do_cow() fixed case with existing indirect object
- * snap/snap.c: snap_delsnap() removes (partly) a snapshot
- * ext2obd/ext2_obd.c: fixed iterator to handle reserved inodes
- * ext2obd/ext2_obd.c: fixed direct_brw() to handle > 1 block offset
- * class/obdcontrol: added testsnapiterator command/ioctl
- * class/setup.sh: added creation of /tmp/fs, 4k block size
- * obdfs/namei.c: fixed new directory size after write
-
-1999-12-07 11:45 adilger
-
- * snap/snap.c: fixed check for snap_create() to test for correct
- read-only copy
-
-1999-12-06 16:53 adilger
-
- * snap/snap.c, snap/snaptable.c: Fixed up snapshot to work again with
- snaptables, added snap_iterate() calldown, snap_cleanup() to free
- a snapshot table entry
- * ext2obd/ext2_obd.c: added iterator ext2obd_iterate() for all inodes
- * class/class_obd.c: blocked TCGETS IOCTL, added connection ID to calls
- * class/obdcontrol: added IOCTL for testing iterator, connection ID
-
-1999-12-06 08:00 braam
-
- * Added a file handling snapshot tables
- * Added an ioctl system that allows ioctls to be made without
- specific devices being attached (pass method down).
- * Numerous small routines for snapshot handling.
-
-1999-12-03 16:53 adilger
-
- * Makefile: made "all" the default target
- * class/class_obd.c, class/genops.c, snap/snap.c: re-ordered
- migrate, copy argument order to be consistent (dst, src)
- * snap/snap.c: fixed unlink to work in all cases of (direct,
- indirect)
- * snap/setup.sh: check for mounted obdfs before starting
- * snap/cleanup.sh: remove loop device
- * ext2obd/ext2_obd.c: start of iterator
-
-1999-12-03 11:08 adilger
-
- * snap/snap.c: implemented unlink functionality for snapshots.
- * doc/obd-howto.sgml: started on OBD howto documentation
-
-1999-12-02 13:40 braam
-
- * class/genops.c: Undo accidental commit
-
-1999-12-02 13:36 braam
-
- * .cvsignore, class/.cvsignore, class/genops.c, ext2obd/.cvsignore,
- inofs/.cvsignore, obdfs/.cvsignore, oraid1/.cvsignore,
- rpcclient/.cvsignore, rpctarget/.cvsignore, snap/.cvsignore: Added
- .cvsignore files to the repository
-
-1999-12-02 12:33 adilger
-
- * snap/setup.sh: Updated to use the new "now" and "current" flags
- when creating snapshots.
-
-1999-12-01 17:11 braam
-
- * class/obdcontrol, doc/OLVM.txt, include/linux/obd_snap.h,
- obdfs/super.c, snap/snap.c: Updated snapshot indexes in superblock
- to not depend on index "0" as being the current snapshot. We still
- need to push the inode attributes to the snap copy so that
- size/times are correct.
-
-1999-12-01 11:45 adilger
-
- * class/genops.c, ext2obd/Makefile, ext2obd/dir.c, ext2obd/file.c,
- ext2obd/inode.c, ext2obd/truncate.c, include/linux/obdfs.h,
- obdfs/rw.c, snap/cleanup.sh, snap/setup.sh, tests/fs.sh: Updated
- parameters for obdfs_writepage() to use struct *dentry instead of
- struct *file, and call in odbfs_write_one_page() to use new
- parameters. Updated gen_copy_data() to round up the number of
- pages copied in while loop.
-
-1999-12-01 01:02 braam
-
- * snap/snap.c: small test
-
-1999-11-30 12:06 braam
-
- * class/genops.c, class/setup.sh, ext2obd/Makefile,
- ext2obd/ext2_obd.c, include/linux/obd_support.h, obdfs/namei.c,
- snap/snap.c: fixes for 2.3.25 and higher
-
-1999-11-24 14:15 braam
-
- * BUGS, Makefile, doc/OLVM.txt, ext2obd/ext2_obd.c,
- include/linux/obd_class.h, include/linux/obd_snap.h,
- include/linux/obd_support.h, include/linux/obdfs.h, obdfs/dir.c,
- obdfs/rw.c, obdfs/super.c: Changes to accomodate the snapshot
- features!
-
-1999-11-24 12:46 braam
-
- * class/: class_obd.c, cleanup.sh, genops.c, obdcontrol, setup.sh:
- Changes to accomodate the snapshot driver.
-
- For working snapshot code, see the snap directory and the
- snap/setup.sh script. The code is not complete, unlink hasn't been
- done yet.
-
-1999-11-24 12:42 braam
-
- * snap/snap.c: first working snapshot OBD driver; see setup.sh for
- usage.
-
-1999-11-03 <braam@cs.cmu.edu>
-
- * class/obdcontrol: add Device directive to change OBD device
- while running
- * class/obdcontrol: add Filesystem directive to change disk
- partition while running
- * rename sim_obd to ext2_obd; prevent doubling up on ext2_unlink
- etc.
- * obdfs/super.c fixes to pass device to kernel and to allow
- mouting multiple devices.
- * clean up the calling of operations and finding of connection
- numbers from obdfs
-
-1999-11-02 12:19 braam
-
- * Makefile: Minimal changes to the makefiles.
-
-1999-11-02 12:12 braam
-
- * Configure, Makefile, make.rules, class/Makefile, doc/notes.txt,
- ext2obd/Makefile, ext2obd/sim_obd.c, ext2obd/test.c,
- ext2obd/test2.c, include/linux/inofs.h, include/linux/obd_rpc.h,
- include/linux/obd_support.h, include/linux/obdfs.h, inofs/Makefile,
- inofs/file.c, inofs/inofs.h, inofs/namei.c, inofs/rw.c,
- inofs/super.c, obdfs/Makefile, obdfs/dir.c, obdfs/file.c,
- obdfs/namei.c, obdfs/notes.txt, obdfs/rw.c, obdfs/super.c,
- oraid1/Makefile, rpcclient/Makefile, rpcclient/obdxdr.c,
- rpcclient/proc.c, rpcclient/rpc_obd.c, snap/Makefile, snap/snap.c,
- tests/test.c, tests/test2.c: New direcotory layout: subdirs for
- different clients and file systems documentation, tests and lib
- subdirectories.
-
-1999-11-01 <braam@wolf.rockies.stelias.com>
-
- * OBDFS fixes:
- - code ported to 2.3.24 (no patches needed anymore)
- - the obdfs_find_entry function which had a nasty bug
- - rename now works
- - all pages are currently in a locked state when touched by obdfs
- - Configure/Makefile fixed to work without MODVERSIONS
- - read_inode/write_inode copy out the data area
-
-1999-11-01 10:44 braam
-
- * .cvsignore, ChangeLog, Configure, class/cleanup.sh,
- class/genops.c, class/obdcontrol, class/setup.sh, class/sysctl.c,
- doc/API.txt, ext2obd/Makefile, ext2obd/inode.c, ext2obd/sim_obd.c,
- include/linux/obd_class.h, include/linux/obd_rpc.h,
- include/linux/obd_snap.h, include/linux/obd_support.h,
- include/linux/obdfs.h, inofs/Makefile, inofs/file.c, inofs/inofs.h,
- inofs/namei.c, inofs/rw.c, inofs/super.c, inofs/sysctl.c,
- obdfs/Makefile, obdfs/dir.c, obdfs/file.c, obdfs/namei.c,
- obdfs/rw.c, obdfs/super.c, obdfs/symlink.c, obdfs/sysctl.c,
- rpcclient/obdxdr.c, rpcclient/rpc_obd.c: Over of the changes:
- Many bugfixes INOFS added SNAP added
-
- See ChangeLog for details
-
-1999-10-28 <braam@wolf.rockies.stelias.com>
-
- * INOFS: a new "inode" file system was written. It tests components
- of obdfs and could be useful for Coda/AFS servers and object
- databases.
-
- * This file system will not have directories, but access pure
- objects. Readdir will be an iterator and to create objects with
- known names (integers of course) the preallocation function will
- need to be completed.
-
- * This will still need to exploit preallocation and and a readdir
- function should be added
-
-1999-10-22 <braam@wolf.rockies.stelias.com>
-
- * Beginning of a "rpc_client" layout for OBD
-
-
-1999-10-21 <braam@wolf.rockies.stelias.com>
-
- * Much of the snap shot client driver is there (see API.txt).
- This driver introduced the need for substantial changes in the
- calling interface of the OBD layers. More to come.
-
- * Part of the RAID1 driver added. Also here many changes to the
- calling interface were needed.
-
-1999-10-21 12:39 braam
-
- * BUGS, ChangeLog, Configure, class/class_obd.c, class/genops.c,
- class/obdcontrol, class/setup.sh, doc/OLVM.txt, ext2obd/Makefile,
- ext2obd/sim_obd.c, oraid1/raid1_obd.c, snap/snap.c,
- include/linux/obd.h, include/linux/obd_class.h,
- include/linux/obd_raid1.h, include/linux/obd_sim.h,
- include/linux/obd_snap.h, include/linux/obd_support.h,
- include/linux/obdfs.h, obdfs/dir.c, obdfs/file.c, obdfs/namei.c,
- obdfs/rw.c, obdfs/super.c, patches/patch-2.3.21: New files: for
- raid1 for snap shots OLVM a technical description of the
- logical volume management genops generic operations useful to
- many obd clients
-
- Fixes: numerous fixes to the file system several fixes to
- OBD and obdcontrol
-
- Current state: does not compile
-
-1999-10-21 00:47 braam
-
- * ChangeLog, Makefile, class/class_obd.c, class/cleanup.sh,
- class/genops.c, class/obdcontrol, class/setup.sh, doc/OLVM.txt,
- ext2obd/Makefile, ext2obd/ext2_obd.c, ext2obd/sim_obd.c,
- ext2obd/super.c, include/linux/obd_class.h,
- include/linux/obd_sim.h, include/linux/obd_snap.h,
- include/linux/obd_support.h, include/linux/obdfs.h, obdfs/namei.c,
- obdfs/rw.c, obdfs/super.c, oraid1/raid1_obd.c, rpcclient/rpc_obd.c,
- scripts/maketags.sh, snap/snap.c: Cleanup : no more "sim" now
- "ext2" can mount multiple devices obdcontrol
- improved more work on snap (doesn't compile yet)
-
- check in just before we are again overhauling the
- interface.
-
-1999-10-12 21:29 braam
-
- * Configure, class/class_obd.c, class/obdcontrol,
- ext2obd/sim_obd.c, include/linux/obd_class.h,
- include/linux/obd_support.h, include/linux/obdfs.h, obdfs/dir.c,
- obdfs/namei.c, obdfs/rw.c, obdfs/super.c: Numerous fixes, including
- the attach code, better page locking etc.
-
-1999-09-25 21:20 braam
-
- * class/class_obd.c, class/obdcontrol, doc/API.txt,
- ext2obd/sim_obd.c, ext2obd/super.c, include/linux/obd_class.h,
- include/linux/obd_sim.h, include/linux/obd_support.h,
- include/linux/obdfs.h, obdfs/Makefile, obdfs/dir.c, obdfs/file.c,
- obdfs/namei.c, obdfs/rw.c, obdfs/super.c, obdfs/sysctl.c: Added
- code for obdfs to do writes to files and reads of directories and
- files.
-
-1999-09-11 00:25 braam
-
- * class/class_obd.c, class/obdcontrol, class/sysctl.c,
- ext2obd/Makefile, ext2obd/balloc.c, ext2obd/bitmap.c,
- ext2obd/dir.c, ext2obd/file.c, ext2obd/fsync.c, ext2obd/ialloc.c,
- ext2obd/inode.c, ext2obd/interface.c, ext2obd/ioctl.c,
- ext2obd/psdev.c, ext2obd/sim_obd.c, ext2obd/super.c,
- ext2obd/truncate.c, include/linux/obd_class.h,
- include/linux/obd_psdev.h, include/linux/obd_sim.h,
- include/linux/presto.h, include/linux/presto_upcall.h,
- include/linux/sim_obd.h: Much cleaner separation of the class and
- simulated obd code.
-
-1999-09-11 00:25 braam
-
- * include/linux/obd_support.h: Whoops, forgotten!
-
-1999-09-03 15:01 braam
-
- * Configure, class/obdcontrol, ext2obd/interface.c,
- ext2obd/ioctl.c, ext2obd/psdev.c: fixes for deliverables.
-
-1999-09-03 15:01 braam
-
- * COPYING: forgot the good old gpl
-
-1999-08-31 17:05 braam
-
- * class/obdcontrol, ext2obd/Makefile, ext2obd/README,
- ext2obd/acl.c, ext2obd/balloc.c, ext2obd/dir.c, ext2obd/file.c,
- ext2obd/fsync.c, ext2obd/ialloc.c, ext2obd/inode.c,
- ext2obd/interface.c, ext2obd/ioctl.c, ext2obd/super.c,
- ext2obd/symlink.c, ext2obd/test.c, ext2obd/truncate.c: Fixes for
- Linux 2.3 as well as bug fixes after Ayman's testing.
-
-1999-08-31 17:05 braam
-
- * patches/: patch-2.2.10, patch-2.3.15: patches for the kernel
- code.
-
-1999-08-31 17:05 braam
-
- * obdfs/super.c: Minor change for Linux 2.3
-
-1999-08-16 16:41 braam
-
- * obdfs/super.c: fix the module unloading bug.
-
-1999-08-10 10:18 braam
-
- * Configure, class/obdcontrol, doc/API.txt, ext2obd/Makefile,
- ext2obd/README, ext2obd/file.c, ext2obd/ialloc.c, ext2obd/inode.c,
- ext2obd/interface.c, ext2obd/ioctl.c, ext2obd/psdev.c,
- ext2obd/super.c, include/linux/obdfs.h, include/linux/sim_obd.h,
- obdfs/README, obdfs/notes.txt: Numerous patches and fixes to Phil's
- initial attack.
-
- In particular we now have clean tracking of inode counts, so that
- things attach detach cleanly. Enough there for deliverable 1 & 2.
-
-1999-07-28 22:10 pschwan
-
- * doc/API.txt, ext2obd/README, ext2obd/interface.c: [no log
- message]
-
-1999-07-28 10:11 braam
-
- * Configure, Makefile, class/sysctl.c, ext2obd/balloc.c,
- ext2obd/bitmap.c, ext2obd/dir.c, ext2obd/file.c, ext2obd/fsync.c,
- ext2obd/ialloc.c, ext2obd/inode.c, ext2obd/interface.c,
- ext2obd/ioctl.c, ext2obd/psdev.c, ext2obd/super.c,
- ext2obd/truncate.c, include/linux/obdfs.h, include/linux/sim_obd.h,
- include/linux/sym_obd.h, obdfs/super.c, obdfs/sysctl.c: Fixed a
- spelling mistake: "symulated" --> "simulated" (sym_obd etc).
-
- Improved configuration scripts
-
- Removed compiler warnings from re-defining ext2_error
-
-1999-06-24 16:16 pschwan
-
- * Configure, Makefile, class/obdcontrol, ext2obd/file.c,
- ext2obd/ialloc.c, ext2obd/inode.c, ext2obd/interface.c,
- ext2obd/ioctl.c, ext2obd/psdev.c, ext2obd/super.c,
- include/linux/sym_obd.h, include/linux/obdfs.h, obdfs/Makefile,
- obdfs/super.c, obdfs/sysctl.c: the last two weeks' work
-
-1999-06-09 18:17 pschwan
-
- * class/obdcontrol, ext2obd/balloc.c, ext2obd/bitmap.c,
- ext2obd/dir.c, ext2obd/file.c, ext2obd/fsync.c, ext2obd/ialloc.c,
- ext2obd/inode.c, ext2obd/interface.c, ext2obd/ioctl.c,
- ext2obd/super.c, ext2obd/truncate.c, include/linux/sym_obd.h:
- mostly read, 2.2.1 -> 2.2.9 updates
-
-1999-06-05 13:02 pschwan
-
- * class/obdcontrol, class/sysctl.c, ext2obd/Makefile,
- ext2obd/balloc.c, ext2obd/bitmap.c, ext2obd/file.c,
- ext2obd/ialloc.c, ext2obd/inode.c, ext2obd/interface.c,
- ext2obd/ioctl.c, ext2obd/psdev.c, ext2obd/super.c, ext2obd/test.c,
- ext2obd/test2.c, ext2obd/truncate.c, include/linux/presto.h,
- include/linux/sym_obd.h: A couple days of changes--much
- improvement.
-
-1999-06-02 19:34 pschwan
-
- * ext2obd/Makefile, ext2obd/balloc.c, ext2obd/bitmap.c,
- ext2obd/dir.c, ext2obd/file.c, ext2obd/fsync.c, ext2obd/ialloc.c,
- ext2obd/inode.c, ext2obd/interface.c, ext2obd/ioctl.c,
- ext2obd/psdev.c, ext2obd/super.c, ext2obd/test.c, ext2obd/test2.c,
- ext2obd/truncate.c, include/linux/obd_psdev.h,
- include/linux/presto.h, include/linux/presto_upcall.h,
- include/linux/sym_obd.h: foo
-
-1999-06-02 19:28 pschwan
-
- * Configure, Makefile, config.in: foo
+ * release version v0_4_1. Hopefully stable on single node use.
git://git.whamcloud.com / fs / lustre-release.git / commitdiff