noinst_DATA += zfs_ost1_2_11.tar.bz2 zfs_ost2_2_11.tar.bz2
noinst_SCRIPTS = leak_finder.pl llmount.sh llmountcleanup.sh functions.sh
noinst_SCRIPTS += test-framework.sh runvmstat runiozone runtests sanity.sh
-noinst_SCRIPTS += rundbench acceptance-small.sh conf-sanity.sh
+noinst_SCRIPTS += acceptance-small.sh conf-sanity.sh conf-sanity-framework.sh
noinst_SCRIPTS += insanity.sh oos.sh oos2.sh dne_sanity.sh sanity-compr.sh
noinst_SCRIPTS += recovery-small.sh replay-dual.sh sanity-quota.sh
noinst_SCRIPTS += replay-ost-single.sh replay-single.sh run-llog.sh sanityn.sh
noinst_SCRIPTS += lnet-selftest.sh obdfilter-survey.sh mmp.sh mmp_mark.sh
noinst_SCRIPTS += sgpdd-survey.sh maloo_upload.sh auster setup-nfs.sh
noinst_SCRIPTS += mds-survey.sh parallel-scale-nfs.sh large-lun.sh
-noinst_SCRIPTS += parallel-scale-nfsv3.sh parallel-scale-nfsv4.sh
+noinst_SCRIPTS += parallel-scale-nfsv3.sh parallel-scale-nfsv4.sh rundbench
noinst_SCRIPTS += setup-cifs.sh parallel-scale-cifs.sh
noinst_SCRIPTS += posix.sh sanity-scrub.sh scrub-performance.sh ha.sh pjdfstest.sh
noinst_SCRIPTS += sanity-lfsck.sh lfsck-performance.sh
--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+set -e
+
+# temporarily disable review-dne-subtest-change sessions from looping
+# 30 minutes for each modified subtest, so that splitting conf-sanity
+# does not trigger hundreds of hours of testing and unusual failures.
+export ONLY_REPEAT=${ONLY_MINUTES:+1}
+
+ONLY=${ONLY:-"$*"}
+PTLDEBUG=${PTLDEBUG:--1}
+LUSTRE=${LUSTRE:-$(dirname $0)/..}
+. $LUSTRE/tests/test-framework.sh
+
+
+STORED_MDSSIZE=$MDSSIZE
+STORED_OSTSIZE=$OSTSIZE
+# use small MDS + OST size to speed formatting time
+# do not use too small MDSSIZE/OSTSIZE, which affect the default journal size
+
+mds1_FSTYPE=${mds1_FSTYPE:-$(facet_fstype mds1)}
+ost1_FSTYPE=${ost1_FSTYPE:-$(facet_fstype ost1)}
+
+MDSSIZE=200000
+[ "$mds1_FSTYPE" = zfs ] && MDSSIZE=400000
+OSTSIZE=200000
+[ "$ost1_FSTYPE" = zfs ] && OSTSIZE=400000
+
+# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
+if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
+ LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
+fi
+
+gen_config() {
+ # The MGS must be started before the OSTs for a new fs, so start
+ # and stop to generate the startup logs.
+ start_mds
+ start_ost
+ wait_osc_import_state mds ost FULL
+ stop_ost
+ stop_mds
+}
+
+reformat_and_config() {
+ reformat
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+ gen_config
+}
+
+writeconf_or_reformat() {
+ # There are at most 2 OSTs for write_conf test
+ # who knows if/where $TUNEFS is installed?
+ # Better reformat if it fails...
+ writeconf_all $MDSCOUNT 2 || {
+ echo "tunefs.lustre failed, reformatting instead"
+ reformat_and_config
+ }
+ return 0
+}
+
+reformat() {
+ formatall
+}
+
+start_mgs () {
+ echo "start mgs service on $(facet_active_host mgs)"
+ start mgs $(mgsdevname) $MGS_MOUNT_OPTS "$@"
+}
+
+start_mdt() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "start mds service on $(facet_active_host $facet)"
+ start $facet ${dev} $MDS_MOUNT_OPTS "$@" || return 94
+}
+
+stop_mdt_no_force() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on $(facet_active_host $facet)"
+ stop $facet || return 97
+}
+
+stop_mdt() {
+ local num=$1
+ local facet=mds$num
+ local dev=$(mdsdevname $num)
+ shift 1
+
+ echo "stop mds service on $(facet_active_host $facet)"
+ # These tests all use non-failover stop
+ stop $facet -f || return 97
+}
+
+start_mds() {
+ local mdscount=$MDSCOUNT
+ local num
+
+ [[ "$1" == "--mdscount" ]] && mdscount=$2 && shift 2
+
+ for ((num=1; num <= mdscount; num++)); do
+ start_mdt $num "$@" || return 94
+ done
+ for ((num=1; num <= mdscount; num++)); do
+ wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds${num} FULL
+ done
+}
+
+start_mgsmds() {
+ if ! combined_mgs_mds ; then
+ start_mgs
+ fi
+ start_mds "$@"
+}
+
+stop_mds() {
+ local num
+
+ for ((num=1; num <= MDSCOUNT; num++)); do
+ stop_mdt $num || return 97
+ done
+}
+
+stop_mgs() {
+ echo "stop mgs service on $(facet_active_host mgs)"
+ # These tests all use non-failover stop
+ stop mgs -f || return 97
+}
+
+start_ost() {
+ echo "start ost1 service on $(facet_active_host ost1)"
+ start ost1 $(ostdevname 1) $OST_MOUNT_OPTS "$@" || return 95
+ wait_clients_import_ready ${CLIENTS:-$HOSTNAME} ost1
+}
+
+stop_ost() {
+ echo "stop ost1 service on $(facet_active_host ost1)"
+ # These tests all use non-failover stop
+ stop ost1 -f || return 98
+}
+
+start_ost2() {
+ echo "start ost2 service on $(facet_active_host ost2)"
+ start ost2 $(ostdevname 2) $OST_MOUNT_OPTS "$@" || return 92
+ wait_clients_import_ready ${CLIENTS:-$HOSTNAME} ost2
+}
+
+stop_ost2() {
+ echo "stop ost2 service on $(facet_active_host ost2)"
+ # These tests all use non-failover stop
+ stop ost2 -f || return 93
+}
+
+mount_client() {
+ local mountpath=$1
+ local mountopt="$2"
+
+ echo "mount $FSNAME ${mountopt:+with opts $mountopt} on $mountpath....."
+ zconf_mount $HOSTNAME $mountpath $mountopt || return 96
+}
+
+umount_client() {
+ local mountpath=$1
+ shift
+ echo "umount lustre on $mountpath....."
+ zconf_umount $HOSTNAME $mountpath "$@" || return 97
+}
+
+manual_umount_client(){
+ local rc
+ local FORCE=$1
+
+ echo "manual umount lustre on ${MOUNT}...."
+ do_facet client "umount ${FORCE} $MOUNT"
+ rc=$?
+ return $rc
+}
+
+setup() {
+ start_mds || error "MDT start failed"
+ start_ost || error "Unable to start OST1"
+ mount_client $MOUNT || error "client start failed"
+ client_up || error "client_up failed"
+}
+
+setup_noconfig() {
+ start_mgsmds
+ start_ost
+ mount_client $MOUNT
+}
+
+unload_modules_conf () {
+ if combined_mgs_mds || ! local_mode; then
+ unload_modules || return 1
+ fi
+}
+
+cleanup_nocli() {
+ stop_ost || return 202
+ stop_mds || return 201
+ unload_modules_conf || return 203
+}
+
+cleanup() {
+ local force=""
+
+ [[ -z "$1" ]] || force="-f"
+ umount_client $MOUNT $force || return 200
+ cleanup_nocli || return $?
+}
+
+cleanup_fs2() {
+ trap 0
+ echo "umount $MOUNT2 ..."
+ umount $MOUNT2 || true
+ echo "stopping fs2mds ..."
+ stop fs2mds -f || true
+ echo "stopping fs2ost ..."
+ stop fs2ost -f || true
+}
+
+check_mount() {
+ do_facet client "cp /etc/passwd $DIR/a" || return 71
+ do_facet client "rm $DIR/a" || return 72
+ # make sure lustre is actually mounted (touch will block,
+ # but grep won't, so do it after)
+ do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
+ echo "setup single mount lustre success"
+}
+
+check_mount2() {
+ do_facet client "touch $DIR/a" || return 71
+ do_facet client "rm $DIR/a" || return 72
+ do_facet client "touch $DIR2/a" || return 73
+ do_facet client "rm $DIR2/a" || return 74
+ echo "setup double mount lustre success"
+}
+
+name_chars=({a..z} {A..Z} {0..9})
+generate_name() {
+ local name=""
+
+ for ((i = 0; i < $1; i++)); do
+ name+=${name_chars[$((RANDOM % ${#name_chars[*]}))]};
+ done
+
+ echo "$name"
+}
LUSTRE=${LUSTRE:-$(dirname $0)/..}
. $LUSTRE/tests/test-framework.sh
+. $LUSTRE/tests/conf-sanity-framework.sh
+
init_test_env "$@"
init_logging
# use small MDS + OST size to speed formatting time
# do not use too small MDSSIZE/OSTSIZE, which affect the default journal size
# STORED_MDSSIZE is used in test_18
-STORED_MDSSIZE=$MDSSIZE
-STORED_OSTSIZE=$OSTSIZE
-MDSSIZE=200000
-[ "$mds1_FSTYPE" = zfs ] && MDSSIZE=400000
-OSTSIZE=200000
-[ "$ost1_FSTYPE" = zfs ] && OSTSIZE=400000
fs2mds_HOST=$mds_HOST
fs2ost_HOST=$ost_HOST
assert_DIR
-gen_config() {
- # The MGS must be started before the OSTs for a new fs, so start
- # and stop to generate the startup logs.
- start_mds
- start_ost
- wait_osc_import_state mds ost FULL
- stop_ost
- stop_mds
-}
-
-reformat_and_config() {
- reformat
- if ! combined_mgs_mds ; then
- start_mgs
- fi
- gen_config
-}
-
-writeconf_or_reformat() {
- # There are at most 2 OSTs for write_conf test
- # who knows if/where $TUNEFS is installed?
- # Better reformat if it fails...
- writeconf_all $MDSCOUNT 2 ||
- { echo "tunefs failed, reformatting instead" &&
- reformat_and_config && return 0; }
- return 0
-}
-
-reformat() {
- formatall
-}
-
-start_mgs () {
- echo "start mgs service on $(facet_active_host mgs)"
- start mgs $(mgsdevname) $MGS_MOUNT_OPTS "$@"
-}
-
-start_mdt() {
- local num=$1
- local facet=mds$num
- local dev=$(mdsdevname $num)
- shift 1
-
- echo "start mds service on `facet_active_host $facet`"
- start $facet ${dev} $MDS_MOUNT_OPTS "$@" || return 94
-}
-
-stop_mdt_no_force() {
- local num=$1
- local facet=mds$num
- local dev=$(mdsdevname $num)
- shift 1
-
- echo "stop mds service on `facet_active_host $facet`"
- stop $facet || return 97
-}
-
-stop_mdt() {
- local num=$1
- local facet=mds$num
- local dev=$(mdsdevname $num)
- shift 1
-
- echo "stop mds service on `facet_active_host $facet`"
- # These tests all use non-failover stop
- stop $facet -f || return 97
-}
-
-start_mds() {
- local mdscount=$MDSCOUNT
- local num
-
- [[ "$1" == "--mdscount" ]] && mdscount=$2 && shift 2
-
- for ((num=1; num <= $mdscount; num++ )); do
- start_mdt $num "$@" || return 94
- done
- for ((num=1; num <= $mdscount; num++ )); do
- wait_clients_import_state ${CLIENTS:-$HOSTNAME} mds${num} FULL
- done
-}
-
-start_mgsmds() {
- if ! combined_mgs_mds ; then
- start_mgs
- fi
- start_mds "$@"
-}
-
-stop_mds() {
- local num
- for num in $(seq $MDSCOUNT); do
- stop_mdt $num || return 97
- done
-}
-
-stop_mgs() {
- echo "stop mgs service on `facet_active_host mgs`"
- # These tests all use non-failover stop
- stop mgs -f || return 97
-}
-
-start_ost() {
- echo "start ost1 service on `facet_active_host ost1`"
- start ost1 $(ostdevname 1) $OST_MOUNT_OPTS "$@" || return 95
- wait_clients_import_ready ${CLIENTS:-$HOSTNAME} ost1
-}
-
-stop_ost() {
- echo "stop ost1 service on `facet_active_host ost1`"
- # These tests all use non-failover stop
- stop ost1 -f || return 98
-}
-
-start_ost2() {
- echo "start ost2 service on `facet_active_host ost2`"
- start ost2 $(ostdevname 2) $OST_MOUNT_OPTS "$@" || return 92
- wait_clients_import_ready ${CLIENTS:-$HOSTNAME} ost2
-}
-
-stop_ost2() {
- echo "stop ost2 service on `facet_active_host ost2`"
- # These tests all use non-failover stop
- stop ost2 -f || return 93
-}
-
-mount_client() {
- local mountpath=$1
- local mountopt="$2"
-
- echo "mount $FSNAME ${mountopt:+with opts $mountopt} on $mountpath....."
- zconf_mount $HOSTNAME $mountpath $mountopt || return 96
-}
-
-umount_client() {
- local mountpath=$1
- shift
- echo "umount lustre on $mountpath....."
- zconf_umount $HOSTNAME $mountpath "$@" || return 97
-}
-
-manual_umount_client(){
- local rc
- local FORCE=$1
- echo "manual umount lustre on ${MOUNT}...."
- do_facet client "umount ${FORCE} $MOUNT"
- rc=$?
- return $rc
-}
-
-setup() {
- start_mds || error "MDT start failed"
- start_ost || error "Unable to start OST1"
- mount_client $MOUNT || error "client start failed"
- client_up || error "client_up failed"
-}
-
-setup_noconfig() {
- start_mgsmds
- start_ost
- mount_client $MOUNT
-}
-
-unload_modules_conf () {
- if combined_mgs_mds || ! local_mode; then
- unload_modules || return 1
- fi
-}
-
-cleanup_nocli() {
- stop_ost || return 202
- stop_mds || return 201
- unload_modules_conf || return 203
-}
-
-cleanup() {
- local force=""
- [ "x$1" != "x" ] && force='-f'
- umount_client $MOUNT $force|| return 200
- cleanup_nocli || return $?
-}
-
-cleanup_fs2() {
- trap 0
- echo "umount $MOUNT2 ..."
- umount $MOUNT2 || true
- echo "stopping fs2mds ..."
- stop fs2mds -f || true
- echo "stopping fs2ost ..."
- stop fs2ost -f || true
-}
-
-check_mount() {
- do_facet client "cp /etc/passwd $DIR/a" || return 71
- do_facet client "rm $DIR/a" || return 72
- # make sure lustre is actually mounted (touch will block,
- # but grep won't, so do it after)
- do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
- echo "setup single mount lustre success"
-}
-
-check_mount2() {
- do_facet client "touch $DIR/a" || return 71
- do_facet client "rm $DIR/a" || return 72
- do_facet client "touch $DIR2/a" || return 73
- do_facet client "rm $DIR2/a" || return 74
- echo "setup double mount lustre success"
-}
-
-generate_name() {
- cat /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $1 | head -n 1
-}
-
if [ "$ONLY" == "setup" ]; then
setup
exit
#!/bin/bash
+if ! $FRAMEWORK_NEEDS_INIT; then
+ return 0
+fi
+FRAMEWORK_NEEDS_INIT=false
+
trap 'print_summary && print_stack_trace | tee $TF_FAIL && \
echo "$TESTSUITE: FAIL: test-framework exiting on error"' ERR
set -e
git://git.whamcloud.com / fs / lustre-release.git / commitdiff