X-Git-Url: https://git.whamcloud.com/?a=blobdiff_plain;f=lustre%2Ftests%2Fmdsrate-create-small.sh;h=bea656f686a20790db8d197957b7bf0c3f687a70;hb=a96e15188d9beb83266975375e47ad205e4241e8;hp=545579634a3e4d30ba98f066bbc268b771179bee;hpb=daec2a459dccb51c843731fa9a0bc205fe4be154;p=fs%2Flustre-release.git

diff --git a/lustre/tests/mdsrate-create-small.sh b/lustre/tests/mdsrate-create-small.sh
index 5455796..bea656f 100644
--- a/lustre/tests/mdsrate-create-small.sh
+++ b/lustre/tests/mdsrate-create-small.sh
@@ -1,24 +1,22 @@
 #!/bin/bash
 #
-# This test was used in a set of CMD3 tests (cmd3-3 test). 
+# This test was used in a set of CMD3 tests (cmd3-3 test).
 
-LUSTRE=${LUSTRE:-`dirname $0`/..}
+LUSTRE=${LUSTRE:-$(dirname $0)/..}
 . $LUSTRE/tests/test-framework.sh
 init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
 
 assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
 
-MACHINEFILE=${MACHINEFILE:-$TMP/$(basename $0 .sh).machines}
-TESTDIR=$MOUNT
+BASEDIR=$MOUNT/mdsrate
 
 # Requirements
 NUM_FILES=${NUM_FILES:-1000000}
 TIME_PERIOD=${TIME_PERIOD:-600}                        # seconds
 
 # Local test variables
-TESTDIR_SINGLE="${TESTDIR}/single"
-TESTDIR_MULTI="${TESTDIR}/multi"
+TESTDIR_SINGLE="${BASEDIR}/single"
+TESTDIR_MULTI="${BASEDIR}/multi"
 
 LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
 CLIENT=$SINGLECLIENT
@@ -34,21 +32,38 @@ fi
 [ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
 
 # Make sure we start with a clean slate
-rm -f ${LOG} PI*
+rm -f ${LOG}
 
-log "===== $0 ====== " 
+log "===== $0 ====== "
 
 check_and_setup_lustre
 
-IFree=$(inodes_available)
+MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
+if $MDSRATE_ENABLE_DNE; then
+	test_mkdir $BASEDIR
+	mdtcount_opt="--mdtcount $MDSCOUNT"
+else
+	mkdir $BASEDIR
+fi
+if $VERBOSE; then
+	debug_opt="--debug"
+fi
+chmod 0777 $BASEDIR
+mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-i 0 -c 1"}}
+setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
+
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
-  
-generate_machine_file $NODES_TO_USE $MACHINEFILE || error "can not generate machinefile"
 
-$LFS setstripe $TESTDIR -i 0 -c 1
-get_stripe $TESTDIR
+generate_machine_file $NODES_TO_USE $MACHINEFILE ||
+	error "can not generate machinefile"
+
+p="$TMP/$TESTSUITE-$TESTNAME.parameters"
+save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
+do_nodes $(comma_list $(mdts_nodes)) \
+	$LCTL set_param mdt.*.enable_remote_dir_gid=-1
 
 if [ -n "$NOSINGLE" ]; then
     echo "NO Tests on single client."
@@ -56,41 +71,49 @@ else
     if [ -n "$NOCREATE" ]; then
         echo "NO Test for creates for a single client."
     else
-        do_node ${CLIENT} "rm -rf $TESTDIR_SINGLE"
+        # We can use np = $NUM_CLIENTS to speed up the cleanup
+        mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_SINGLE 'f%%d' --ignore
 
         log "===== $0 ### 1 NODE CREATE ###"
-        echo "Running creates on 1 node(s)."
-
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
 
-        if [ ${PIPESTATUS[0]} != 0 ]; then
-        [ -f $LOG ] && cat $LOG
-            error "mpirun ... mdsrate ... failed, aborting"
-        fi
+	COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+		--nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'
+		$mdtcount_opt $debug_opt"
+	echo "+ ${COMMAND}"
+	mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
+		tee ${LOG}
+
+	if [ ${PIPESTATUS[0]} != 0 ]; then
+		[ -f $LOG ] && sed -e "s/^/log: /" $LOG
+		error_noexit "mdsrate create on single client failed, aborting"
+		restore_lustre_params < $p
+		mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
+				$TESTDIR_SINGLE 'f%%d' --ignore
+		exit 1
+	fi
     fi
 
     if [ -n "$NOUNLINK" ]; then
         echo "NO Test for unlinks for a single client."
     else
         log "===== $0 ### 1 NODE UNLINK ###"
-        echo "Running unlinks on 1 node(s)."
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink --time ${TIME_PERIOD}
+        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                      --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np 1 -machinefile ${MACHINEFILE} ${COMMAND} | tee ${LOG}
+        mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
+		tee ${LOG}
 
         if [ ${PIPESTATUS[0]} != 0 ]; then
-        [ -f $LOG ] && cat $LOG
-            error "mpirun ... mdsrate ... failed, aborting"
+            [ -f $LOG ] && sed -e "s/^/log: /" $LOG
+            error "mdsrate unlinks for a single client failed, aborting"
         fi
+
+        rmdir $TESTDIR_SINGLE
     fi
 fi
 
-IFree=$(inodes_available)
+IFree=$(mdsrate_inodes_available)
 if [ $IFree -lt $NUM_FILES ]; then
     NUM_FILES=$IFree
 fi
@@ -101,42 +124,52 @@ else
     if [ -n "$NOCREATE" ]; then
         echo "NO test for create on multiple nodes."
     else
-        do_node $CLIENT rm -rf $TESTDIR_MULTI
-
-        log "===== $0 ### $NUM_CLIENTS NODES CREATE ###"
-        echo "Running creates on ${NUM_CLIENTS} node(s) with $THREADS_PER_CLIENT threads per client."
-
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
-                    --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
-        echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
-        if [ ${PIPESTATUS[0]} != 0 ]; then
-            [ -f $LOG ] && cat $LOG
-            error "mpirun ... mdsrate ... failed, aborting"
-        fi
+        mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_MULTI 'f%%d' --ignore
+
+        log "===== $0 ### $NUM_CLIENTS NODES CREATE with $THREADS_PER_CLIENT threads per client ###"
+
+	COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
+		--nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
+	echo "+ ${COMMAND}"
+	mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
+		-np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
+		tee ${LOG}
+
+	if [ ${PIPESTATUS[0]} != 0 ]; then
+		[ -f $LOG ] && sed -e "s/^/log: /" $LOG
+		error_noexit "mdsrate create on multiple nodes failed, aborting"
+		restore_lustre_params < $p
+		mdsrate_cleanup $((NUM_CLIENTS * THREADS_PER_CLIENT)) \
+				$MACHINEFILE $NUM_FILES \
+				$TESTDIR_MULTI 'f%%d' --ignore
+		exit 1
+	fi
     fi
 
     if [ -n "$NOUNLINK" ]; then
         echo "NO Test for unlinks multiple nodes."
     else
-        log "===== $0 ### $NUM_CLIENTS NODES UNLINK ###"
-        echo "Running unlinks on ${NUM_CLIENTS} node(s) with $THREADS_PER_CLIENT threads per client."
+        log "===== $0 ### $NUM_CLIENTS NODES UNLINK with $THREADS_PER_CLIENT threads per client ###"
 
-        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink --time ${TIME_PERIOD}
+        COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
                       --nfiles ${NUM_FILES} --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
         echo "+ ${COMMAND}"
-        mpi_run -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) -machinefile ${MACHINEFILE} \
-            ${COMMAND} | tee ${LOG}
+        mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
+		-np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
+		tee ${LOG}
         if [ ${PIPESTATUS[0]} != 0 ]; then
-            [ -f $LOG ] && cat $LOG
-            error "mpirun ... mdsrate ... failed, aborting"
+            [ -f $LOG ] && sed -e "s/^/log: /" $LOG
+            error "mdsrate unlinks multiple nodes failed, aborting"
         fi
+
+        rmdir $TESTDIR_MULTI
     fi
 fi
 
-equals_msg `basename $0`: test complete, cleaning up
-rm -f $MACHINEFILE 
+complete $SECONDS
+restore_lustre_params < $p
+rmdir $BASEDIR || true
+rm -f $MACHINEFILE
 check_and_cleanup_lustre
 #rm -f $LOG