X-Git-Url: https://git.whamcloud.com/?a=blobdiff_plain;f=lustre%2Ftests%2Fconf-sanity.sh;h=57b97c748903b2c4068c88f2aded57ee67654db5;hb=d574a55778f035691bd3bed621cfcdb8200a9785;hp=7b3f25ab7187583e84df8a48888d74fa901a1b7d;hpb=d908fe9686bc1e583da7434856d9c06e6cbbc4fd;p=fs%2Flustre-release.git

diff --git a/lustre/tests/conf-sanity.sh b/lustre/tests/conf-sanity.sh
index 7b3f25a..57b97c7 100644
--- a/lustre/tests/conf-sanity.sh
+++ b/lustre/tests/conf-sanity.sh
@@ -15,7 +15,7 @@ init_logging
 ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT 32newtarball"
 
 # bug number for skipped test: LU-11915
-ALWAYS_EXCEPT="$ALWAYS_EXCEPT  110"
+ALWAYS_EXCEPT="$ALWAYS_EXCEPT  110 115"
 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
 
 if $SHARED_KEY; then
@@ -71,7 +71,7 @@ gen_config() {
 	# and stop to generate the startup logs.
 	start_mds
 	start_ost
-        wait_osc_import_state mds ost FULL
+	wait_osc_import_state mds ost FULL
 	stop_ost
 	stop_mds
 }
@@ -95,7 +95,7 @@ writeconf_or_reformat() {
 }
 
 reformat() {
-        formatall
+	formatall
 }
 
 start_mgs () {
@@ -113,6 +113,16 @@ start_mdt() {
 	start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
 }
 
+stop_mdt_no_force() {
+	local num=$1
+	local facet=mds$num
+	local dev=$(mdsdevname $num)
+	shift 1
+
+	echo "stop mds service on `facet_active_host $facet`"
+	stop $facet || return 97
+}
+
 stop_mdt() {
 	local num=$1
 	local facet=mds$num
@@ -147,9 +157,9 @@ stop_mds() {
 }
 
 stop_mgs() {
-       echo "stop mgs service on `facet_active_host mgs`"
-       # These tests all use non-failover stop
-       stop mgs -f  || return 97
+	echo "stop mgs service on `facet_active_host mgs`"
+	# These tests all use non-failover stop
+	stop mgs -f  || return 97
 }
 
 start_ost() {
@@ -175,16 +185,11 @@ stop_ost2() {
 }
 
 mount_client() {
-	local MOUNTPATH=$1
-	echo "mount $FSNAME on ${MOUNTPATH}....."
-	zconf_mount $(hostname) $MOUNTPATH || return 96
-}
+	local mountpath=$1
+	local mountopt="$2"
 
-remount_client() {
-	local mountopt="remount,$1"
-	local MOUNTPATH=$2
-	echo "remount '$1' lustre on ${MOUNTPATH}....."
-	zconf_mount $(hostname) $MOUNTPATH "$mountopt" || return 96
+	echo "mount $FSNAME ${mountopt:+with opts $mountopt} on $mountpath....."
+	zconf_mount $HOSTNAME $mountpath $mountopt || return 96
 }
 
 umount_client() {
@@ -249,8 +254,8 @@ check_mount() {
 	do_facet client "cp /etc/passwd $DIR/a" || return 71
 	do_facet client "rm $DIR/a" || return 72
 	# make sure lustre is actually mounted (touch will block,
-        # but grep won't, so do it after)
-        do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
+	# but grep won't, so do it after)
+	do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
 	echo "setup single mount lustre success"
 }
 
@@ -706,10 +711,10 @@ test_20() {
 	mount_client $MOUNT || error "mount_client $MOUNT failed"
 	check_mount || error "check_mount failed"
 	rm -f $DIR/$tfile || error "remove $DIR/$tfile failed."
-	remount_client ro $MOUNT || error "remount_client with ro failed"
+	mount_client $MOUNT remount,ro || error "remount client with ro failed"
 	touch $DIR/$tfile && error "$DIR/$tfile created incorrectly"
 	[ -e $DIR/$tfile ] && error "$DIR/$tfile exists incorrectly"
-	remount_client rw $MOUNT || error "remount_client with rw failed"
+	mount_client $MOUNT remount,rw || error "remount client with rw failed"
 	touch $DIR/$tfile || error "touch $DIR/$tfile failed"
 	MCNT=$(grep -c $MOUNT' ' /etc/mtab)
 	[ "$MCNT" -ne 1 ] && error "$MOUNT in /etc/mtab $MCNT times"
@@ -762,12 +767,18 @@ test_21d() {
 	start_mds || error "MDS start failed"
 	wait_osc_import_state mds ost2 FULL
 
+	local zkeeper=${KEEP_ZPOOL}
+	stack_trap "KEEP_ZPOOL=$zkeeper" EXIT
+	KEEP_ZPOOL="true"
+
 	stop_ost || error "Unable to stop OST1"
 	stop_ost2 || error "Unable to stop OST2"
 	stop_mds || error "Unable to stop MDS"
 	stop_mgs
 	#writeconf to remove all ost2 traces for subsequent tests
 	writeconf_or_reformat
+	KEEP_ZPOOL="${zkeeper}"
+
 	start_mgs || error "unable to start MGS"
 }
 run_test 21d "start mgs then ost and then mds"
@@ -1426,6 +1437,16 @@ test_32newtarball() {
 	echo $T32_BLIMIT > $tmp/img/blimit
 	echo $T32_ILIMIT > $tmp/img/ilimit
 
+	$MULTIOP /mnt/$FSNAME/orph_file Ouw_c&
+	pid=$!
+	sync
+	stop_mdt_no_force 1
+	debugfs -R "ls /PENDING" ${MDSDEV1:-$MDSDEV}
+	cp ${MDSDEV1:-$MDSDEV} $tmp/img
+	start_mdt 1
+	kill -s USR1 $pid
+	wait $pid
+
 	stopall
 
 	pushd $tmp/src
@@ -1439,7 +1460,6 @@ test_32newtarball() {
 	uname -r >$tmp/img/kernel
 	uname -m >$tmp/img/arch
 
-	mv ${MDSDEV1:-$MDSDEV} $tmp/img
 	for num in $(seq 2 $MDSCOUNT); do
 		local devname=$(mdsdevname $num)
 		local facet=mds$num
@@ -1661,6 +1681,7 @@ t32_test() {
 	local writeconf=$2
 	local dne_upgrade=${dne_upgrade:-"no"}
 	local dom_upgrade=${dom_upgrade:-"no"}
+	local project_upgrade=${project_upgrade:-"no"}
 	local ff_convert=${ff_convert:-"no"}
 	local shall_cleanup_mdt=false
 	local shall_cleanup_mdt1=false
@@ -1757,6 +1778,16 @@ t32_test() {
 				error_noexit "import zfs pool failed"
 				return 1
 			}
+	elif [ "$project_upgrade" != "no" ]; then
+		! $r tune2fs -O project $mdt_dev &&
+			error_noexit "enable project on mdt0 failed" &&
+				return 1
+		$mdt2_is_available && ! $r tune2fs "-O project" $mdt2_dev &&
+			error_noexit "enable project on mdt failed" &&
+				return 1
+		! $r tune2fs -O project $ost_dev &&
+			error_noexit "enable project on mdt failed" &&
+				return 1
 	fi
 
 	$r $LCTL set_param debug="$PTLDEBUG"
@@ -2136,9 +2167,9 @@ t32_test() {
 			$LFS setdirstripe -D -c2 $tmp/mnt/lustre/striped_dir
 
 			pushd $tmp/mnt/lustre
-			tar -cf - . --exclude=./striped_dir \
-				    --exclude=./striped_dir_old \
-				    --exclude=./remote_dir |
+			tar -c --exclude=./striped_dir \
+				--exclude=./striped_dir_old \
+				--exclude=./remote_dir -f - .|
 				tar -xvf - -C striped_dir 1>/dev/null || {
 				error_noexit "cp to striped dir failed"
 				return 1
@@ -2317,6 +2348,26 @@ t32_test() {
 		}
 		shall_cleanup_lustre=false
 	else
+		$MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
+			error_noexit "Mounting the client"
+			return 1
+		}
+
+		if [ "$mds1_FSTYPE" == ldiskfs -a \
+		    "$project_upgrade" != "no" ]; then
+			! $LFS project -d -p 1 $tmp/mnt/lustre/* &&
+				error_noexit "set project failed" &&
+					return 1
+		fi
+
+		[[ $(do_facet mds1 pgrep orph_.*-MDD | wc -l) == 0 ]] ||
+			error "MDD orphan cleanup thread not quit"
+
+		umount $tmp/mnt/lustre || {
+			error_noexit "Unmounting the client"
+			return 1
+		}
+
 		if [[ "$dne_upgrade" != "no" ]] || $mdt2_is_available; then
 			$r $UMOUNT $tmp/mnt/mdt1 || {
 				error_noexit "Unmounting the MDT2"
@@ -2388,6 +2439,7 @@ test_32a() {
 
 	t32_check
 	for tarball in $tarballs; do
+		banner "testing $tarball upgrade"
 		t32_test $tarball || let "rc += $?"
 	done
 	return $rc
@@ -2401,6 +2453,7 @@ test_32b() {
 
 	t32_check
 	for tarball in $tarballs; do
+		banner "testing $tarball upgrade with writeconf"
 		t32_test $tarball writeconf || let "rc += $?"
 	done
 	return $rc
@@ -2416,8 +2469,9 @@ test_32c() {
 	t32_check
 	for tarball in $tarballs; do
 		# Do not support 1_8 and 2_1 direct upgrade to DNE2 anymore */
-		echo $tarball | grep "1_8" && continue
-		echo $tarball | grep "2_1" && continue
+		[[ "$tarball" =~ "1_8" ]] && echo "skip $tarball" && continue
+		[[ "$tarball" =~ "2_1" ]] && echo "skip $tarball" && continue
+		banner "testing $tarball upgrade with DNE"
 		load_modules
 		dne_upgrade=yes t32_test $tarball writeconf || rc=$?
 	done
@@ -2432,11 +2486,17 @@ test_32d() {
 
 	t32_check
 	for tarball in $tarballs; do
-		ff_convert=yes t32_test $tarball || rc=$?
+		banner "testing $tarball upgrade with ff convert and project upgrade"
+		project_upgrade="no"
+		[[ "$MDS1_VERSION" -ge $(version_code 2.13.54) ]] &&
+			[[ "$tarball" =~ "disk2_4-ldiskfs" ]] &&
+				project_upgrade="yes"
+		project_upgrade=$project_upgrade ff_convert=yes t32_test \
+			$tarball || rc=$?
 	done
 	return $rc
 }
-run_test 32d "convert ff test"
+run_test 32d "convert ff and project quota upgrade test"
 
 test_32e() {
 	[[ "$MDS1_VERSION" -ge $(version_code 2.10.56) ]] ||
@@ -2448,8 +2508,9 @@ test_32e() {
 
 	t32_check
 	for tarball in $tarballs; do
-		echo $tarball | grep "2_9" || continue
+		[[ "$tarball" =~ "2_9" ]] || continue
 		#load_modules
+		banner "testing $tarball upgrade with DoM"
 		dom_upgrade=yes t32_test $tarball writeconf || let "rc += $?"
 	done
 	return $rc
@@ -3511,16 +3572,13 @@ test_48() { # bz-17636 LU-7473
 	# LOV EA, and so on. These EA will use some EA space that is shared by
 	# ACL entries. So here we only check some reasonable ACL entries count,
 	# instead of the max number that is calculated from the max_ea_size.
-	if [ "$MDS1_VERSION" -lt $(version_code 2.8.57) ];
-	then
+	if [ "$MDS1_VERSION" -lt $(version_code 2.8.57) ]; then
 		count=28	# hard coded of RPC protocol
-	elif [ "$mds1_FSTYPE" != ldiskfs ]; then
-		count=4000	# max_num 4091 max_ea_size = ~65536
-	elif ! large_xattr_enabled; then
-		count=450	# max_num 497 max_ea_size = 4012
-	else
+	elif large_xattr_enabled; then
 		count=4500	# max_num 8187 max_ea_size = 65452
-				# not create too much (>5000) to save test time
+				# not create too many (4500) to save test time
+	else
+		count=450	# max_num 497 max_ea_size = 4012
 	fi
 
 	echo "It is expected to hold at least $count ACL entries"
@@ -4645,6 +4703,10 @@ test_63() {
 		skip "ldiskfs module has not been loaded"
 	fi
 
+	if grep -q "CONFIG_DEBUG_LOCK_ALLOC=y" /boot/config-$(uname -r); then
+		skip "test is not compatible with CONFIG_DEBUG_LOCK_ALLOC=y"
+	fi
+
 	echo "$inode_slab ldiskfs inodes per page"
 	[ "${inode_slab%.*}" -ge "3" ] && return 0
 
@@ -5864,22 +5926,15 @@ test_81() { # LU-4665
 
 	# Check max_easize.
 	local max_easize=$($LCTL get_param -n llite.*.max_easize)
-	if [ $MDS1_VERSION -lt $(version_code 2.12.51) ]
-	then
-		[[ $max_easize -eq 128 ]] ||
-			error "max_easize is $max_easize, should be 128 bytes"
+	# 65452 is XATTR_SIZE_MAX less ldiskfs ea overhead
+	if large_xattr_enabled; then
+		[[ $max_easize -ge 65452 ]] ||
+			error "max_easize is $max_easize, should be at least 65452 bytes"
 	else
 		# LU-11868
-		# 4012 is 4096 - ldiskfs ea overhead
+		# 4012 is 4096 less ldiskfs ea overhead
 		[[ $max_easize -ge 4012 ]] ||
-		error "max_easize is $max_easize, should be at least 4012 bytes"
-
-		# 65452 is XATTR_SIZE_MAX - ldiskfs ea overhead
-		if large_xattr_enabled;
-		then
-			[[ $max_easize -ge 65452 ]] ||
-			error "max_easize is $max_easize, should be at least 65452 bytes"
-		fi
+			error "max_easize is $max_easize, should be at least 4012 bytes"
 	fi
 
 	restore_ostindex
@@ -6132,7 +6187,7 @@ test_83() {
 		error "format ost1 error"
 
 	if ! test -b $dev; then
-		mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
+		mnt_opts=$(csa_add "$OST_MOUNT_FS_OPTS" -o loop)
 	fi
 	echo "mnt_opts $mnt_opts"
 	do_facet ost1 mount -t "$ost1_FSTYPE" $dev \
@@ -6292,6 +6347,7 @@ test_87() { #LU-6544
 		skip "ldiskfs only test"
 	[[ $OSTCOUNT -gt 59 ]] &&
 		skip "Ignore wide striping situation"
+	[ -n "$FILESET" ] && skip "Not functional for FILESET set"
 
 	local mdsdev=$(mdsdevname 1)
 	local mdsvdev=$(mdsvdevname 1)
@@ -6370,7 +6426,7 @@ test_87() { #LU-6544
 		       more than $left_size-byte space left in inode."
 	echo "Verified: at most $left_size-byte space left in inode."
 
-	umount_ldiskfs $SINGLEMDS
+	unmount_ldiskfs $SINGLEMDS
 
 	for i in $(seq $OSTCOUNT); do
 		stop ost$i -f || error "stop ost$i failed"
@@ -6631,10 +6687,41 @@ test_90b() {
 }
 run_test 90b "check max_mod_rpcs_in_flight is enforced after update"
 
+save_params_90c() {
+	# get max_rpcs_in_flight value
+	mrif_90c=$($LCTL get_param -n \
+		   mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+	echo "max_rpcs_in_flight is $mrif_90c"
+
+	# get max_mod_rpcs_in_flight value
+	mmrif_90c=$($LCTL get_param -n \
+		    mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight)
+	echo "max_mod_rpcs_in_flight is $mmrif_90c"
+
+	# get MDT max_mod_rpcs_per_client value
+	mmrpc_90c=$(do_facet mds1 \
+		    cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
+	echo "max_mod_rpcs_per_client is $mmrpc_90c"
+}
+
+restore_params_90c() {
+	trap 0
+
+	# restore max_rpcs_in_flight value
+	do_facet mgs $LCTL set_param -P \
+		mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+	# restore max_mod_rpcs_in_flight value
+	do_facet mgs $LCTL set_param -P \
+		mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mmrif_90c
+
+	# restore MDT max_mod_rpcs_per_client value
+	do_facet mds1 "echo $mmrpc_90c > \
+		       /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+}
+
 test_90c() {
 	local tmp
-	local mrif
-	local mmrpc
 
 	setup
 
@@ -6650,42 +6737,64 @@ test_90c() {
 		skip "Client not able to send multiple modify RPCs in parallel"
 	fi
 
-	# get max_rpcs_in_flight value
-	mrif=$($LCTL get_param -n mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
-	echo "max_rpcs_in_flight is $mrif"
-
-	# get MDT max_mod_rpcs_per_client
-	mmrpc=$(do_facet mds1 \
-		    cat /sys/module/mdt/parameters/max_mod_rpcs_per_client)
-	echo "max_mod_rpcs_per_client is $mmrpc"
+	save_params_90c
+	stack_trap restore_params_90c
 
 	# testcase 1
 	# attempt to set max_mod_rpcs_in_flight to max_rpcs_in_flight value
 	# prerequisite: set max_mod_rpcs_per_client to max_rpcs_in_flight value
-	umount_client $MOUNT
-	do_facet mds1 \
-		"echo $mrif > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
-	mount_client $MOUNT
+	do_facet mds1 "echo $mrif_90c > \
+		       /sys/module/mdt/parameters/max_mod_rpcs_per_client"
 
-	$LCTL set_param \
-	    mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif &&
-	    error "set max_mod_rpcs_in_flight to $mrif should fail"
+	# if max_mod_rpcs_in_flight is set to be equal to or larger than
+	# max_rpcs_in_flight, then max_rpcs_in_flight will be increased
+	if [[ "$CLIENT_VERSION" -ge $(version_code 2.13.53) ]]; then
+		$LCTL set_param \
+		mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c ||
+			error "set max_mod_rpcs_in_flight to $mrif_90c failed"
+
+		local new_mrif=$($LCTL get_param -n \
+				 mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight)
+		((new_mrif == mrif_90c + 1)) ||
+			error "max_rpcs_in_flight was not increased"
+	fi
 
 	umount_client $MOUNT
-	do_facet mds1 \
-		"echo $mmrpc > /sys/module/mdt/parameters/max_mod_rpcs_per_client"
+	do_facet mds1 "echo $mmrpc_90c > \
+		       /sys/module/mdt/parameters/max_mod_rpcs_per_client"
 	mount_client $MOUNT
 
 	# testcase 2
 	# attempt to set max_mod_rpcs_in_flight to max_mod_rpcs_per_client+1
 	# prerequisite: set max_rpcs_in_flight to max_mod_rpcs_per_client+2
 	$LCTL set_param \
-	    mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc + 2))
+		mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$((mmrpc_90c + 2))
 
 	$LCTL set_param \
-	    mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc + 1)) &&
-	    error "set max_mod_rpcs_in_flight to $((mmrpc + 1)) should fail"
+	mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$((mmrpc_90c + 1)) &&
+	error "set max_mod_rpcs_in_flight to $((mmrpc_90c + 1)) should fail"
+
+	# testcase 3
+	# attempt to set max_mod_rpcs_in_flight permanently
+	do_facet mgs $LCTL set_param -P \
+		mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight=$mrif_90c
+
+	do_facet mgs $LCTL set_param -P \
+		mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight=$mrif_90c
+
+	remount_client $MOUNT
+
+	wait_update_facet --verbose client "$LCTL get_param -n \
+		mdc.$FSNAME-MDT0000-mdc-*.max_rpcs_in_flight" \
+		"$((mrif_90c + 1))" ||
+		error "expected '$((mrif_90c + 1))' for max_rpcs_in_flight"
+
+	wait_update_facet --verbose client "$LCTL get_param -n \
+		mdc.$FSNAME-MDT0000-mdc-*.max_mod_rpcs_in_flight" \
+		"$mrif_90c" ||
+		error "expected '$mrif_90c' for max_mod_rpcs_in_flight"
 
+	restore_params_90c
 	cleanup
 }
 run_test 90c "check max_mod_rpcs_in_flight update limits"
@@ -7265,7 +7374,7 @@ test_98()
 	for ((x = 1; x <= 400; x++)); do
 		mountopt="$mountopt,user_xattr"
 	done
-	remount_client $mountopt $MOUNT  2>&1 | grep "too long" ||
+	mount_client $MOUNT remount,$mountopt 2>&1 | grep "too long" ||
 		error "Buffer overflow check failed"
 	cleanup || error "cleanup failed"
 }
@@ -7314,9 +7423,9 @@ test_100() {
 	# Desired output
 	# MGS:
 	#     0@lo
-	# lustre-MDT0000:
+	# $FSNAME-MDT0000:
 	#     0@lo
-	# lustre-OST0000:
+	# $FSNAME-OST0000:
 	#     0@lo
 	do_facet mgs 'lshowmount -v' | awk 'BEGIN {NR == 0; rc=1} /MGS:/ {rc=0}
 		END {exit rc}' || error "lshowmount have no output MGS"
@@ -7408,34 +7517,34 @@ test_renamefs() {
 	echo "rename $FSNAME to $newname"
 
 	if ! combined_mgs_mds ; then
-		local facet=$(mgsdevname)
+		local dev=$(mgsdevname)
 
 		do_facet mgs \
-			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
-			error "(7) Fail to rename MGS"
-		if [ "$(facet_fstype $facet)" = "zfs" ]; then
+			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+				error "(7) Fail to rename MGS"
+		if [ "$(facet_fstype mgs)" = "zfs" ]; then
 			reimport_zpool mgs $newname-mgs
 		fi
 	fi
 
 	for num in $(seq $MDSCOUNT); do
-		local facet=$(mdsdevname $num)
+		local dev=$(mdsdevname $num)
 
 		do_facet mds${num} \
-			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
-			error "(8) Fail to rename MDT $num"
-		if [ "$(facet_fstype $facet)" = "zfs" ]; then
+			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+				error "(8) Fail to rename MDT $num"
+		if [ "$(facet_fstype mds${num})" = "zfs" ]; then
 			reimport_zpool mds${num} $newname-mdt${num}
 		fi
 	done
 
 	for num in $(seq $OSTCOUNT); do
-		local facet=$(ostdevname $num)
+		local dev=$(ostdevname $num)
 
 		do_facet ost${num} \
-			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $facet"||
-			error "(9) Fail to rename OST $num"
-		if [ "$(facet_fstype $facet)" = "zfs" ]; then
+			"$TUNEFS --fsname=$newname --rename=$FSNAME -v $dev" ||
+				error "(9) Fail to rename OST $num"
+		if [ "$(facet_fstype ost${num})" = "zfs" ]; then
 			reimport_zpool ost${num} $newname-ost${num}
 		fi
 	done
@@ -7527,7 +7636,7 @@ test_103() {
 }
 run_test 103 "rename filesystem name"
 
-test_104() { # LU-6952
+test_104a() { # LU-6952
 	local mds_mountopts=$MDS_MOUNT_OPTS
 	local ost_mountopts=$OST_MOUNT_OPTS
 	local mds_mountfsopts=$MDS_MOUNT_FS_OPTS
@@ -7577,7 +7686,22 @@ test_104() { # LU-6952
 	OST_MOUNT_OPTS=$ost_mountopts
 	MDS_MOUNT_FS_OPTS=$mds_mountfsopts
 }
-run_test 104 "Make sure user defined options are reflected in mount"
+run_test 104a "Make sure user defined options are reflected in mount"
+
+test_104b() { # LU-12859
+	mount_client $MOUNT3 flock,localflock
+	stack_trap "umount_client $MOUNT3" EXIT
+	mount | grep "$MOUNT3 .*,flock" && error "flock is still set"
+	mount | grep "$MOUNT3 .*,localflock" || error "localflock is not set"
+	umount_client $MOUNT3
+	mount_client $MOUNT3 localflock,flock
+	mount | grep "$MOUNT3 .*,localflock" && error "localflock is still set"
+	mount | grep "$MOUNT3 .*,flock" || error "flock is not set"
+	umount_client $MOUNT3
+	mount_client $MOUNT3 localflock,flock,noflock
+	flock_is_enabled $MOUNT3 && error "some flock is still enabled" || true
+}
+run_test 104b "Mount uses last flock argument"
 
 error_and_umount() {
 	umount $TMP/$tdir
@@ -7795,10 +7919,10 @@ test_108a() {
 
 	echo "changing server nid..."
 	$rcmd mount -t lustre -o nosvc lustre-mdt1/mdt1 $tmp/mnt/mdt1
-	$rcmd lctl replace_nids lustre-MDT0000 $nid
-	$rcmd lctl replace_nids lustre-MDT0001 $nid
-	$rcmd lctl replace_nids lustre-OST0000 $nid
-	$rcmd lctl replace_nids lustre-OST0001 $nid
+	$rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+	$rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+	$rcmd lctl replace_nids $FSNAME-OST0000 $nid
+	$rcmd lctl replace_nids $FSNAME-OST0001 $nid
 	$rcmd umount $tmp/mnt/mdt1
 
 	for facet in $facets; do
@@ -7857,10 +7981,10 @@ test_108b() {
 
 	echo "changing server nid..."
 	$rcmd mount -t lustre -o nosvc,loop $tmp/images/mdt1 $tmp/mnt/mdt1
-	$rcmd lctl replace_nids lustre-MDT0000 $nid
-	$rcmd lctl replace_nids lustre-MDT0001 $nid
-	$rcmd lctl replace_nids lustre-OST0000 $nid
-	$rcmd lctl replace_nids lustre-OST0001 $nid
+	$rcmd lctl replace_nids $FSNAME-MDT0000 $nid
+	$rcmd lctl replace_nids $FSNAME-MDT0001 $nid
+	$rcmd lctl replace_nids $FSNAME-OST0000 $nid
+	$rcmd lctl replace_nids $FSNAME-OST0001 $nid
 	$rcmd umount $tmp/mnt/mdt1
 
 	for facet in $facets; do
@@ -7870,7 +7994,7 @@ test_108b() {
 	done
 
 	for facet in $scrub_list; do
-		$rcmd $LCTL lfsck_start -M lustre-$facet -t scrub ||
+		$rcmd $LCTL lfsck_start -M $FSNAME-$facet -t scrub ||
 			error "failed to start OI scrub on $facet"
 	done
 
@@ -8296,6 +8420,32 @@ test_111() {
 }
 run_test 111 "Adding large_dir with over 2GB directory"
 
+test_112() {
+	start_mds || error "MDS start failed"
+	start_ost || error "OSS start failed"
+	echo "start ost2 service on $(facet_active_host ost2)"
+	start ost2 $(ostdevname 2) $(csa_add "$OST_MOUNT_OPTS" -o no_precreate) ||
+		error "start ost2 facet failed"
+	local val=$(do_facet ost2 \
+		   "$LCTL get_param -n obdfilter.$FSNAME-OST0001*.no_precreate")
+	(( $val == 1 )) || error "obdfilter.$FSNAME-OST0001*.no_precreate=$val"
+
+	mount_client $MOUNT || error "mount client failed"
+	wait_osc_import_state client ost2 FULL
+
+	$LFS setstripe -i 0 $DIR/$tfile.0 ||
+		error "problem creating $tfile.0 on OST0000"
+	$LFS setstripe -i 1 $DIR/$tfile.1 && $LFS getstripe $DIR/$tfile.1 &&
+		(( $($LFS getstripe -i $DIR/$tfile.1) == 1 )) &&
+		error "allowed to create $tfile.1 on OST0001"
+	do_facet ost2 $LCTL set_param obdfilter.*.no_precreate=0
+	sleep_maxage
+	$LFS setstripe -i 1 $DIR/$tfile.2 ||
+		error "failed to create $tfile.2 on ost1 facet"
+	stop_ost2 || error "stop ost2 facet failed"
+	cleanup
+}
+run_test 112 "mount OST with nocreate option"
 
 cleanup_115()
 {
@@ -8308,6 +8458,7 @@ test_115() {
 	if [ "$mds1_FSTYPE" != ldiskfs ]; then
 		skip "Only applicable to ldiskfs-based MDTs"
 	fi
+	[ -n "$FILESET" ] && skip "Not functional for FILESET set"
 
 	local dbfs_ver=$(do_facet $SINGLEMDS $DEBUGFS -V 2>&1)
 
@@ -8321,6 +8472,14 @@ test_115() {
 	IMAGESIZE=$((3072 << 30)) # 3072 GiB
 
 	stopall
+
+	echo "client1: "
+	lctl dl
+	mount | grep lustre
+	echo "mds1: "
+	do_facet mds1 "hostname; ifconfig; lctl dl; mount"
+	echo "ost1: "
+	do_facet ost1 "hostname; ifconfig; lctl dl; mount"
 	# We need MDT size 3072GB, because it is smallest
 	# partition that can store 2B inodes
 	do_facet $SINGLEMDS "mkdir -p $TMP/$tdir"
@@ -8333,9 +8492,9 @@ test_115() {
 	local mdsdev=$(do_facet $SINGLEMDS "losetup -f")
 	do_facet $SINGLEMDS "losetup $mdsdev $mdsimgname"
 
-	local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1)) --device-size=$IMAGESIZE   \
+	local mds_opts="$(mkfs_opts mds1 $(mdsdevname 1))	 \
 		--mkfsoptions='-O ea_inode,^resize_inode,meta_bg \
-		-N 2247484000 -E lazy_itable_init'"
+		-N 2247484000 -E lazy_itable_init' --device-size=$IMAGESIZE"
 	add mds1 $mds_opts --mgs --reformat $mdsdev ||
 		skip_env "format large MDT failed"
 	opts="$(mkfs_opts ost1 $(ostdevname 1)) \
@@ -8498,7 +8657,7 @@ test_123ab() {
 	local orig_val
 
 	orig_val=$(do_facet mgs $LCTL get_param jobid_name)
-	do_facet mgs $LCTL set_param -P jobid_name="testname"
+	do_facet mgs $LCTL set_param -P jobid_name="TESTNAME"
 
 	yaml=$(do_facet mgs $LCTL --device MGS llog_print params |
 	       grep jobid_name | tail -n 1)
@@ -8507,7 +8666,7 @@ test_123ab() {
 	local val=$(awk '{ print $12 }' <<< "$yaml")
 	#return to the default
 	do_facet mgs $LCTL set_param -P jobid_name=$orig_val
-	[ $val = "testname" ] || error "bad value: $val"
+	[ $val = "TESTNAME" ] || error "bad value: $val"
 	[ $param = "jobid_name," ] || error "Bad param: $param"
 }
 run_test 123ab "llog_print params output values from set_param -P"
@@ -8612,6 +8771,55 @@ test_123ae() { # LU-11566
 }
 run_test 123ae "llog_cancel can cancel requested record"
 
+test_123af() { #LU-13609
+	[ "$MGS_VERSION" -ge $(version_code 2.13.54) -a \
+	   "$MDS1_VERSION" -ge $(version_code 2.13.54) ] ||
+		skip "Need both MGS and MDS version at least 2.13.54"
+
+	[ -d $MOUNT/.lustre ] || setupall
+	stack_trap "do_facet mds1 $LCTL set_param fail_loc=0" EXIT
+
+	local device
+	local facet
+	local cmd
+	local orig_clist
+	local orig_count
+	local new_clist
+	local new_count
+
+	for device in "MGS" "$FSNAME-MDT0000"; do
+		cmd="--device $device llog_catlist"
+		echo "lctl $cmd ..."
+		if [ "$device" = "MGS" ]; then
+			facet="mgs"
+		else
+			facet="mds1"
+		fi
+		orig_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+		orig_count=${#orig_clist[@]}
+		echo "orig_clist: ${orig_clist[@]}"
+
+		#define OBD_FAIL_CATLIST 0x131b
+		#fetch to llog records from the second one
+		do_facet $facet $LCTL set_param fail_loc=0x131b fail_val=2
+
+		new_clist=($(do_facet $facet $LCTL $cmd | awk '{ print $2 }'))
+		new_count=${#new_clist[@]}
+		echo "new_clist: ${new_clist[@]}"
+
+		[ $new_count -eq $((orig_count - 1)) ] ||
+			error "$new_count != $orig_count - 1"
+		for i in $(seq 0 $new_count); do
+			j=$((i + 1))
+			[ "${orig_clist[$j]}" = "${new_clist[$i]}" ] ||
+				error "${orig_clist[$j]} != ${new_clist[$i]}"
+		done
+		do_facet mds1 $LCTL set_param fail_loc=0
+		echo "done"
+	done
+}
+run_test 123af "llog_catlist can show all config files correctly"
+
 test_123F() {
 	remote_mgs_nodsh && skip "remote MGS with nodsh"
 
@@ -8623,7 +8831,7 @@ test_123F() {
 
 	# set jobid_var to a different value for test
 	local orig_val=$(do_facet mgs $LCTL get_param jobid_var)
-	do_facet mgs $LCTL set_param -P jobid_var="testname"
+	do_facet mgs $LCTL set_param -P jobid_var="TESTNAME"
 
 	for i in $cfgfiles params; do
 		do_facet mgs "lctl --device MGS llog_print ${i} >> $yaml_file"
@@ -8646,8 +8854,8 @@ test_123F() {
 	local set_val=$(do_facet mgs $LCTL get_param jobid_var)
 	do_facet mgs $LCTL set_param -P $orig_val
 
-	[ $set_val == "jobid_var=testname" ] ||
-		error "$set_val is not testname"
+	[ $set_val == "jobid_var=TESTNAME" ] ||
+		error "$set_val is not TESTNAME"
 
 	do_facet mgs rm "$yaml_file"
 	cleanup
@@ -8827,6 +9035,24 @@ test_125()
 }
 run_test 125 "check l_tunedisk only tunes OSTs and their slave devices"
 
+test_126() {
+	[[ "$MDS1_VERSION" -ge $(version_code 2.13.52) ]] ||
+		skip "Need MDS version at least 2.13.52"
+
+	cleanup
+	do_rpc_nodes $(facet_active_host $SINGLEMDS) load_module ../libcfs/libcfs/libcfs
+	#define OBD_FAIL_OBD_SETUP 0x60d
+	do_facet mds1 $LCTL set_param fail_loc=0x60d
+	do_rpc_nodes $(facet_active_host $SINGLEMDS) load_modules &
+	for i in {1..40}; do
+		do_facet mds1 lsmod | grep -q osd_$mds1_FSTYPE && break
+		sleep 1
+	done
+	clear_failloc $SINGLEMDS 20 &
+	start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS
+}
+run_test 126 "mount in parallel shouldn't cause a crash"
+
 if ! combined_mgs_mds ; then
 	stop mgs
 fi