X-Git-Url: https://git.whamcloud.com/?a=blobdiff_plain;f=lustre%2Ftests%2Fcfg%2Flocal.sh;h=df6c5c3d293a4a7a07325d92a92f84ac9b5a8593;hb=ede8644550462f905547d5690b6111b15aef8daa;hp=7569790a8181a733c961f9534c8a58857f8bdd93;hpb=682f3e19473b91f6face2567513b25a7b6d3fc24;p=fs%2Flustre-release.git

diff --git a/lustre/tests/cfg/local.sh b/lustre/tests/cfg/local.sh
index 7569790..df6c5c3 100644
--- a/lustre/tests/cfg/local.sh
+++ b/lustre/tests/cfg/local.sh
@@ -1,19 +1,23 @@
 FSNAME=${FSNAME:-lustre}
 
 # facet hosts
-mds_HOST=${mds_HOST:-`hostname`}
+mds_HOST=${mds_HOST:-$(hostname)}
 mdsfailover_HOST=${mdsfailover_HOST}
 mgs_HOST=${mgs_HOST:-$mds_HOST}
-ost_HOST=${ost_HOST:-`hostname`}
+ost_HOST=${ost_HOST:-$(hostname)}
 ostfailover_HOST=${ostfailover_HOST}
 CLIENTS=""
+# FILESET variable is used by sanity.sh to verify fileset
+# feature, tests should pass even under subdirectory namespace.
+FILESET=${FILESET:-""}
+[[ -z "$FILESET" ]] || [[ "${FILESET:0:1}" = "/" ]] || FILESET="/$FILESET"
 
 TMP=${TMP:-/tmp}
 
 DAEMONSIZE=${DAEMONSIZE:-500}
 MDSCOUNT=${MDSCOUNT:-1}
 MDSDEVBASE=${MDSDEVBASE:-$TMP/${FSNAME}-mdt}
-MDSSIZE=${MDSSIZE:-200000}
+MDSSIZE=${MDSSIZE:-250000}
 #
 # Format options of facets can be specified with these variables:
 #
@@ -31,25 +35,47 @@ MDSSIZE=${MDSSIZE:-200000}
 MDSOPT=${MDSOPT:-}
 MDS_FS_MKFS_OPTS=${MDS_FS_MKFS_OPTS:-}
 MDS_MOUNT_OPTS=${MDS_MOUNT_OPTS:-}
+# <facet_type>_MOUNT_FS_OPTS is the mount options specified when formatting
+# the underlying device by argument "--mountfsoptions"
+MDS_MOUNT_FS_OPTS=${MDS_MOUNT_FS_OPTS:-}
 
 MGSSIZE=${MGSSIZE:-$MDSSIZE}
 MGSOPT=${MGSOPT:-}
 MGS_FS_MKFS_OPTS=${MGS_FS_MKFS_OPTS:-}
 MGS_MOUNT_OPTS=${MGS_MOUNT_OPTS:-}
+MGS_MOUNT_FS_OPTS=${MGS_MOUNT_FS_OPTS:-}
 
 OSTCOUNT=${OSTCOUNT:-2}
 OSTDEVBASE=${OSTDEVBASE:-$TMP/${FSNAME}-ost}
-OSTSIZE=${OSTSIZE:-200000}
+OSTSIZE=${OSTSIZE:-400000}
 OSTOPT=${OSTOPT:-}
 OST_FS_MKFS_OPTS=${OST_FS_MKFS_OPTS:-}
 OST_MOUNT_OPTS=${OST_MOUNT_OPTS:-}
+OST_MOUNT_FS_OPTS=${OST_MOUNT_FS_OPTS:-}
+OST_INDEX_LIST=${OST_INDEX_LIST:-}
 # Can specify individual ost devs with
 # OSTDEV1="/dev/sda"
 # on specific hosts with
 # ost1_HOST="uml2"
+# ost1_JRN="/dev/sdb1"
+#
+# For ZFS, ost devices can be specified via either or both of the following:
+# OSTZFSDEV1="${FSNAME}-ost1/ost1"
+# OSTDEV1="/dev/sdb1"
+#
+# OST indices can be specified as follows:
+# OSTINDEX1="1"
+# OSTINDEX2="2"
+# OSTINDEX3="4"
+# ......
+# or
+# OST_INDEX_LIST="[1,2,4-6,8]"	# [n-m,l-k,...], where n < m and l < k, etc.
+#
+# The default index value of an individual OST is its facet number minus 1.
+# More specific ones override more general ones. See facet_index().
 
 NETTYPE=${NETTYPE:-tcp}
-MGSNID=${MGSNID:-`h2$NETTYPE $mgs_HOST`}
+MGSNID=${MGSNID:-$(h2nettype $mgs_HOST)}
 
 #
 # Back end file system type(s) of facets can be specified with these
@@ -66,21 +92,14 @@ FSTYPE=${FSTYPE:-ldiskfs}
 LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS:-}
 ZFS_MKFS_OPTS=${ZFS_MKFS_OPTS:-}
 
-#
-# If any OST is "remote" and the non-default implementation (e.g.,
-# current OFD) is desired, then make sure that either a)
-# LOAD_MODULES_REMOTE is true or b) modprobe(8) is configured to
-# blacklist the undesired (and aliased the other, if necessary).
-#
-USE_OFD=${USE_OFD:-yes}
-LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-true}
+LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
 
-STRIPE_BYTES=${STRIPE_BYTES:-1048576}
-STRIPES_PER_OBJ=${STRIPES_PER_OBJ:-0}
-SINGLEMDS=${SINGLEMDS:-"mds1"}
+DEF_STRIPE_SIZE=${DEF_STRIPE_SIZE:-}   # filesystem default stripe size in bytes
+DEF_STRIPE_COUNT=${DEF_STRIPE_COUNT:-} # filesystem default stripe count
 TIMEOUT=${TIMEOUT:-20}
-PTLDEBUG=${PTLDEBUG:-"vfstrace rpctrace dlmtrace neterror ha config ioctl super"}
-SUBSYSTEM=${SUBSYSTEM:-"all -lnet -lnd -pinger"}
+PTLDEBUG=${PTLDEBUG:-"vfstrace rpctrace dlmtrace neterror ha config \
+		      ioctl super lfsck"}
+SUBSYSTEM=${SUBSYSTEM:-"all"}
 
 # promise 2MB for every cpu
 if [ -f /sys/devices/system/cpu/possible ]; then
@@ -94,16 +113,23 @@ DEBUG_SIZE=${DEBUG_SIZE:-$_debug_mb}
 ENABLE_QUOTA=${ENABLE_QUOTA:-""}
 QUOTA_TYPE="ug3"
 QUOTA_USERS=${QUOTA_USERS:-"quota_usr quota_2usr sanityusr sanityusr1"}
+# "error: conf_param: No such device" issue in every test suite logs
+# sanity-quota test_32 hash_lqs_cur_bits is not set properly
 LQUOTAOPTS=${LQUOTAOPTS:-"hash_lqs_cur_bits=3"}
 
 #client
 MOUNT=${MOUNT:-/mnt/${FSNAME}}
 MOUNT1=${MOUNT1:-$MOUNT}
 MOUNT2=${MOUNT2:-${MOUNT}2}
-MOUNTOPT=${MOUNTOPT:-"-o user_xattr,flock"}
+MOUNT3=${MOUNT3:-${MOUNT}3}
+# Comma-separated option list used as "mount [...] -o $MOUNT_OPTS [...]"
+MOUNT_OPTS=${MOUNT_OPTS:-"user_xattr,flock"}
+# Mount flags (e.g. "-n") used as "mount [...] $MOUNT_FLAGS [...]"
+MOUNT_FLAGS=${MOUNT_FLAGS:-""}
 DIR=${DIR:-$MOUNT}
 DIR1=${DIR:-$MOUNT1}
 DIR2=${DIR2:-$MOUNT2}
+DIR3=${DIR3:-$MOUNT3}
 
 if [ $UID -ne 0 ]; then
         log "running as non-root uid $UID"
@@ -123,11 +149,25 @@ POWER_UP=${POWER_UP:-"powerman --on"}
 SLOW=${SLOW:-no}
 FAIL_ON_ERROR=${FAIL_ON_ERROR:-true}
 
-MPIRUN=$(which mpirun 2>/dev/null) || true
+MPIRUN=${MPIRUN:-$(which mpirun 2>/dev/null || true)}
 MPI_USER=${MPI_USER:-mpiuser}
 SHARED_DIR_LOGS=${SHARED_DIR_LOGS:-""}
+MACHINEFILE_OPTION=${MACHINEFILE_OPTION:-"-machinefile"}
 
 # This is used by a small number of tests to share state between the client
 # running the tests, or in some cases between the servers (e.g. lfsck.sh).
 # It needs to be a non-lustre filesystem that is available on all the nodes.
-SHARED_DIRECTORY=${SHARED_DIRECTORY:-""}	# bug 17839 comment 65
+SHARED_DIRECTORY=${SHARED_DIRECTORY:-$TMP}	# bug 17839 comment 65
+
+#
+# In order to test multiple remote HSM agents, a new facet type named "AGT" and
+# the following associated variables are added:
+#
+# AGTCOUNT: number of agents
+# AGTDEV{N}: target HSM mount point (root path of the backend)
+# agt{N}_HOST: hostname of the agent agt{N}
+# SINGLEAGT: facet of the single agent
+#
+# Please refer to init_agt_vars() in sanity-hsm.sh for the default values of
+# these variables.
+#