X-Git-Url: https://git.whamcloud.com/?a=blobdiff_plain;f=lustre%2Fdoc%2Flctl.8;h=b50a1f641863472f7a56930e28977291ce48e58c;hb=14b115c8e24dd99fc27e17d77865a238f0a767e2;hp=53ea4eec6d1837e87444e311b516eb4a2ad1d976;hpb=e03aa1d2d933c28c9a31fa06708c3244424807f8;p=fs%2Flustre-release.git

diff --git a/lustre/doc/lctl.8 b/lustre/doc/lctl.8
index 53ea4ee..b50a1f6 100644
--- a/lustre/doc/lctl.8
+++ b/lustre/doc/lctl.8
@@ -56,6 +56,16 @@ Print all Network Identifiers on the local node. LNET must be running.
 From a list of nids for a remote node, show which interface communication
 will take place on.
 .TP
+.BI replace_nids " <devicename> <nid1>[,nid2,nid3 ...]"
+Replace the LNET Network Identifiers for a given device,
+as when the server's IP address has changed.
+This command must be run on the MGS node.
+Only MGS server should be started (command execution returns error
+in another cases). To start the MGS service only:
+mount -t lustre <MDT partition> -o nosvc <mount point>
+Note the replace_nids command skips any invalidated records in the configuration log.
+The previous log is backed up with the suffix '.bak'.
+.TP
 .BI ping " <nid> "
 Check LNET connectivity via an LNET ping. This will use the fabric
 appropriate to the specified NID.
@@ -92,15 +102,14 @@ Show all the local Lustre OBDs. AKA
 .PP
 .SS Device Operations
 .TP 
-.BI list_param " [-F|-R] <param_path ...>"
+.BI list_param " [-F|-R] <param_search ...>"
 List the Lustre or LNet parameter name
-.br
 .B -F
 Add '/', '@' or '=' for dirs, symlinks and writeable files, respectively.
 .br
 .B -R
-Recursively list all parameters under the specified path. If
-.I param_path 
+Recursively list all parameters under the specified parameter search string. If
+.I param_search
 is unspecified, all the parameters will be shown.
 .br
 .B Examples:
@@ -121,7 +130,7 @@ is unspecified, all the parameters will be shown.
 .br
   debug=
 .br
-.B	
+.B
 # lctl list_param -R mdt
 .br
   mdt
@@ -142,8 +151,8 @@ is unspecified, all the parameters will be shown.
 .br
   ...
 .TP
-.BI get_param " [-n|-N|-F] <param_path ...>"
-Get the value of Lustre or LNET parameter from the specified path.
+.BI get_param " [-n|-N|-F] <parameter ...>"
+Get the value of Lustre or LNET parameter.
 .br
 .B -n
 Print only the value and not parameter name.
@@ -181,12 +190,19 @@ When -N specified, add '/', '@' or '=' for directories, symlinks and writeable f
 .br
 lctl "get_param -NF" is equivalent to "list_param -F".
 .TP
-.BI set_param " [-n] <param_path=value ...>"
-Set the value of Lustre or LNET parameter from the specified path.
+.BI set_param " [-n] [-P] [-d] <parameter=value ...>"
+Set the value of Lustre or LNET parameter.
 .br
 .B -n
 Disable printing of the key name when printing values.
 .br
+.B -P
+Set the parameter permanently, filesystem-wide.
+This parameters are only visible to 2.5.0 and later clients, older clients will not see these parameters.
+.br
+.B -d
+Remove the permanent setting (only with -P option)
+.br
 .B Examples:
 .br
 .B
@@ -202,6 +218,10 @@ Disable printing of the key name when printing values.
   0
 .br
   20
+.br
+.B
+# lctl set_param -P osc.*.max_dirty_mb=32
+.br
 .TP
 .BI conf_param " [-d] <device|fsname>.<parameter>=<value>"
 Set a permanent configuration parameter for any device via the MGS.  This
@@ -275,6 +295,54 @@ Unregister an existing changelog user.  If the user's "clear" record number
 is the minimum for the device, changelog records will be purged until the
 next minimum.  
 .PP
+.SS LFSCK
+An on-line Lustre consistency check and repair tool.
+.TP
+.B lfsck_start \fR<-M | --device MDT_device>
+     \fR[-e | --error <error_handle>]
+     \fR[-h | --help]
+     \fR[-n | --dryrun <switch>]
+     \fR[-r | --reset]
+     \fR[-s | --speed <speed_limit>]
+     \fR[-t | --type <lfsck_type[,lfsck_type...]>]
+.br
+Start LFSCK on the specified MDT device with specified parameters.
+.TP
+  -M, --device <MDT_device>
+The MDT device to check.
+.TP
+  -e, --error <error_handle>
+With error_handle as 'abort' LFSCK will stop if a repair is impossible. If no
+value is specified, the saved value will be used if resuming from a checkpoint.
+Otherwise the default behavior is to 'continue' if a rapair is impossible.
+.TP
+  -h, --help
+Show this help.
+.TP
+  -n, --dryrun <on|off>
+Perform a trial run with no changes made.
+.TP
+  -r, --reset
+Set the current position of LFSCK progress to the beginning of the specified
+MDT.
+.TP
+  -s, --speed <speed_limit>
+Set the upper limit of LFSCK processing in objects per second. If no value is
+specified the saved value is used (if resuming from a check point). Otherwise
+the default value of 0 is used. 0 means run as fast as possible.
+.TP
+  -t, --type <lfsck_type[,lfsck_type...]>
+Specify the type of LFSCK to execute. By default, OI Scrub is executed.
+Alternative types include FID-in-dirent and linkEA (namespace).
+.TP
+.B lfsck_stop  \fR<-M | --device MDT_device> [-h | --help]
+Stop LFSCK on the specified MDT device.
+.TP
+  -M, --device <MDT_device>
+The MDT device.
+.TP
+  -h, --help
+Show this help.
 .SS Debug
 .TP 
 .BI debug_daemon 
@@ -328,15 +396,11 @@ Debug log: 87 lines, 87 kept, 0 dropped.
 .br
 lctl > quit
 
-.SH BUGS
-Please report all bugs to Sun Microsystems, Inc. http://bugzilla.lustre.org/
 .SH AVAILABILITY
 .B lctl
 is part of the 
 .BR Lustre (7) 
-filesystem package and is available from Sun Microsystems, Inc.
-.br
-http://www.sun.com/software/products/lustre/index.xml
+filesystem package.
 .SH SEE ALSO
 .BR Lustre (7),
 .BR mkfs.lustre (8),