X-Git-Url: https://git.whamcloud.com/?a=blobdiff_plain;ds=sidebyside;f=lustre%2Ftests%2Fsanity.sh;h=661be1a7b6d5a86a6b708ade0848bed4bb030bf2;hb=cd5660a4c5732e0ac81bb0be4dee0c75163a8e38;hp=8ec81119433fd5c0ad7b09bad33baa330a2c2a92;hpb=7cc486b0a9e5000f8a4a130ce0ba7288cde585d7;p=fs%2Flustre-release.git

diff --git a/lustre/tests/sanity.sh b/lustre/tests/sanity.sh
old mode 100755
new mode 100644
index 8ec8111..661be1a
--- a/lustre/tests/sanity.sh
+++ b/lustre/tests/sanity.sh
@@ -105,7 +105,6 @@ check_swap_layouts_support()
 }
 
 check_and_setup_lustre
-
 DIR=${DIR:-$MOUNT}
 assert_DIR
 
@@ -2020,6 +2019,7 @@ run_test 27C "check full striping across all OSTs"
 
 test_27D() {
 	[ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs" && return
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 	local POOL=${POOL:-testpool}
 	local first_ost=0
 	local last_ost=$(($OSTCOUNT - 1))
@@ -4960,6 +4960,29 @@ test_56x() {
 }
 run_test 56x "lfs migration support"
 
+test_56xa() {
+	check_swap_layouts_support && return 0
+	[[ $OSTCOUNT -lt 2 ]] &&
+		skip_env "need 2 OST, skipping test" && return
+
+	local dir0=$DIR/$tdir/$testnum
+	test_mkdir -p $dir0 || error "creating dir $dir0"
+
+	local ref1=/etc/passwd
+	local file1=$dir0/file1
+
+	$SETSTRIPE -c 2 $file1
+	cp $ref1 $file1
+	$LFS migrate --block -c 1 $file1 || error "migrate failed rc = $?"
+	local stripe=$($GETSTRIPE -c $file1)
+	[[ $stripe == 1 ]] || error "stripe of $file1 is $stripe != 1"
+	cmp $file1 $ref1 || error "content mismatch $file1 differs from $ref1"
+
+	# clean up
+	rm -f $file1
+}
+run_test 56xa "lfs migration --block support"
+
 test_56y() {
 	[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.53) ] &&
 		skip "No HSM $(lustre_build_version $SINGLEMDS) MDS < 2.4.53" &&
@@ -9946,6 +9969,7 @@ test_154a() {
 	[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
 		{ skip "Need MDS version at least 2.2.51"; return 0; }
 	[ -z "$(which setfacl)" ] && skip "must have setfacl tool" && return
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	cp /etc/hosts $DIR/$tfile
 
@@ -9972,6 +9996,7 @@ test_154b() {
 	[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
 	[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
 		{ skip "Need MDS version at least 2.2.51"; return 0; }
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
 
@@ -10068,6 +10093,7 @@ test_154e()
 run_test 154e ".lustre is not returned by readdir"
 
 test_154f() {
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 	# create parent directory on a single MDT to avoid cross-MDT hardlinks
 	test_mkdir -p -c1 $DIR/$tdir/d
 	# test dirs inherit from its stripe
@@ -10147,6 +10173,7 @@ test_154g()
 {
 	[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.92) ]] ||
 		{ skip "Need MDS version at least 2.6.92"; return 0; }
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	mkdir -p $DIR/$tdir
 	llapi_fid_test -d $DIR/$tdir
@@ -11435,6 +11462,7 @@ test_185() { # LU-2441
 	local mtime1=$(stat -c "%Y" $DIR/$tdir)
 	local fid=$($MULTIOP $DIR/$tdir VFw4096c) ||
 		error "cannot create/write a volatile file"
+	[ "$FILESET" == "" ] &&
 	$CHECKSTAT -t file $MOUNT/.lustre/fid/$fid 2>/dev/null &&
 		error "FID is still valid after close"
 
@@ -11449,8 +11477,10 @@ test_185() { # LU-2441
 	# is unfortunately eaten by multiop_bg_pause
 	local n=$((${fidv[1]} + 1))
 	local next_fid="${fidv[0]}:$(printf "0x%x" $n):${fidv[2]}"
-	$CHECKSTAT -t file $MOUNT/.lustre/fid/$next_fid ||
-		error "FID is missing before close"
+	if [ "$FILESET" == "" ]; then
+		$CHECKSTAT -t file $MOUNT/.lustre/fid/$next_fid ||
+			error "FID is missing before close"
+	fi
 	kill -USR1 $multi_pid
 	# 1 second delay, so if mtime change we will see it
 	sleep 1
@@ -11501,6 +11531,7 @@ run_test 187b "Test data version change on volatile file"
 test_200() {
 	[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
 	remote_mgs_nodsh && skip "remote MGS with nodsh" && return
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	local POOL=${POOL:-cea1}
 	local POOL_ROOT=${POOL_ROOT:-$DIR/d200.pools}
@@ -13197,6 +13228,7 @@ run_test 232 "failed lock should not block umount"
 test_233a() {
 	[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.64) ] ||
 	{ skip "Need MDS version at least 2.3.64"; return; }
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	local fid=$($LFS path2fid $MOUNT)
 	stat $MOUNT/.lustre/fid/$fid > /dev/null ||
@@ -13207,6 +13239,7 @@ run_test 233a "checking that OBF of the FS root succeeds"
 test_233b() {
 	[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.90) ] ||
 	{ skip "Need MDS version at least 2.5.90"; return; }
+	[ -n "$FILESET" ] && skip "SKIP due to FILESET set" && return
 
 	local fid=$($LFS path2fid $MOUNT/.lustre)
 	stat $MOUNT/.lustre/fid/$fid > /dev/null ||
@@ -13488,6 +13521,90 @@ test_246() { # LU-7371
 }
 run_test 246 "Read file of size 4095 should return right length"
 
+test_247a() {
+	lctl get_param -n mdc.$FSNAME-MDT0000*.import |
+		grep -q subtree ||
+		{ skip "Fileset feature is not supported"; return; }
+
+	local submount=${MOUNT}_$tdir
+
+	mkdir $MOUNT/$tdir
+	mkdir -p $submount || error "mkdir $submount failed"
+	FILESET="$FILESET/$tdir" mount_client $submount ||
+		error "mount $submount failed"
+	echo foo > $submount/$tfile || error "write $submount/$tfile failed"
+	[ $(cat $MOUNT/$tdir/$tfile) = "foo" ] ||
+		error "read $MOUNT/$tdir/$tfile failed"
+	umount_client $submount || error "umount $submount failed"
+	rmdir $submount
+}
+run_test 247a "mount subdir as fileset"
+
+test_247b() {
+	lctl get_param -n mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
+		{ skip "Fileset feature is not supported"; return; }
+
+	local submount=${MOUNT}_$tdir
+
+	rm -rf $MOUNT/$tdir
+	mkdir -p $submount || error "mkdir $submount failed"
+	SKIP_FILESET=1
+	FILESET="$FILESET/$tdir" mount_client $submount &&
+		error "mount $submount should fail"
+	rmdir $submount
+}
+run_test 247b "mount subdir that dose not exist"
+
+test_247c() {
+	lctl get_param -n mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
+		{ skip "Fileset feature is not supported"; return; }
+
+	local submount=${MOUNT}_$tdir
+
+	mkdir -p $MOUNT/$tdir/dir1
+	mkdir -p $submount || error "mkdir $submount failed"
+	FILESET="$FILESET/$tdir" mount_client $submount ||
+		error "mount $submount failed"
+	local fid=$($LFS path2fid $MOUNT/)
+	$LFS fid2path $submount $fid && error "fid2path should fail"
+	umount_client $submount || error "umount $submount failed"
+	rmdir $submount
+}
+run_test 247c "running fid2path outside root"
+
+test_247d() {
+	lctl get_param -n mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
+		{ skip "Fileset feature is not supported"; return; }
+
+	local submount=${MOUNT}_$tdir
+
+	mkdir -p $MOUNT/$tdir/dir1
+	mkdir -p $submount || error "mkdir $submount failed"
+	FILESET="$FILESET/$tdir" mount_client $submount ||
+		error "mount $submount failed"
+	local fid=$($LFS path2fid $submount/dir1)
+	$LFS fid2path $submount $fid || error "fid2path should succeed"
+	umount_client $submount || error "umount $submount failed"
+	rmdir $submount
+}
+run_test 247d "running fid2path inside root"
+
+# LU-8037
+test_247e() {
+	lctl get_param -n mdc.$FSNAME-MDT0000*.import |
+		grep -q subtree ||
+		{ skip "Fileset feature is not supported"; return; }
+
+	local submount=${MOUNT}_$tdir
+
+	mkdir $MOUNT/$tdir
+	mkdir -p $submount || error "mkdir $submount failed"
+	FILESET="$FILESET/.." mount_client $submount &&
+		error "mount $submount should fail"
+	rmdir $submount
+}
+run_test 247e "mount .. as fileset"
+
 test_250() {
 	[ "$(facet_fstype ost$(($($GETSTRIPE -i $DIR/$tfile) + 1)))" = "zfs" ] \
 	 && skip "no 16TB file size limit on ZFS" && return
@@ -13570,6 +13687,47 @@ test_252() {
 }
 run_test 252 "check lr_reader tool"
 
+test_254() {
+	local cl_user
+
+	[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+	remote_mds_nodsh && skip "remote MDS with nodsh" && return
+	do_facet mds1 $LCTL get_param -n mdd.$MDT0.changelog_size ||
+		{ skip "MDS does not support changelog_size" && return; }
+
+	cl_user=$(do_facet mds1 $LCTL --device $MDT0 changelog_register -n)
+	echo "Registered as changelog user $cl_user"
+
+	$LFS changelog_clear $MDT0 $cl_user 0
+
+	local size1=$(do_facet mds1 \
+		      $LCTL get_param -n mdd.$MDT0.changelog_size)
+	echo "Changelog size $size1"
+
+	rm -rf $DIR/$tdir
+	$LFS mkdir -i 0 $DIR/$tdir
+	# change something
+	mkdir -p $DIR/$tdir/pics/2008/zachy
+	touch $DIR/$tdir/pics/2008/zachy/timestamp
+	cp /etc/hosts $DIR/$tdir/pics/2008/zachy/pic1.jpg
+	mv $DIR/$tdir/pics/2008/zachy $DIR/$tdir/pics/zach
+	ln $DIR/$tdir/pics/zach/pic1.jpg $DIR/$tdir/pics/2008/portland.jpg
+	ln -s $DIR/$tdir/pics/2008/portland.jpg $DIR/$tdir/pics/desktop.jpg
+	rm $DIR/$tdir/pics/desktop.jpg
+
+	local size2=$(do_facet mds1 \
+		      $LCTL get_param -n mdd.$MDT0.changelog_size)
+	echo "Changelog size after work $size2"
+
+	do_facet mds1 $LCTL --device $MDT0 changelog_deregister $cl_user
+
+	if (( size2 <= size1 )); then
+		error "Changelog size after work should be greater than original"
+	fi
+	return 0
+}
+run_test 254 "Check changelog size"
+
 test_256() {
 	local cl_user
 	local cat_sl
@@ -14436,6 +14594,58 @@ test_401b() {
 }
 run_test 401b "Verify 'lctl {get,set}_param' continue after error"
 
+test_401c() {
+	local jobid_var_old=$($LCTL get_param -n jobid_var)
+	local jobid_var_new
+
+	$LCTL set_param jobid_var= &&
+		error "no error returned for 'set_param a='"
+
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_old" == "$jobid_var_new" ]] ||
+		error "jobid_var was changed by setting without value"
+
+	$LCTL set_param jobid_var &&
+		error "no error returned for 'set_param a'"
+
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_old" == "$jobid_var_new" ]] ||
+		error "jobid_var was changed by setting without value"
+}
+run_test 401c "Verify 'lctl set_param' without value fails in either format."
+
+test_401d() {
+	local jobid_var_old=$($LCTL get_param -n jobid_var)
+	local jobid_var_new
+	local new_value="foo=bar"
+
+	$LCTL set_param jobid_var=$new_value ||
+		error "'set_param a=b' did not accept a value containing '='"
+
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_new" == "$new_value" ]] ||
+		error "'set_param a=b' failed on a value containing '='"
+
+	# Reset the jobid_var to test the other format
+	$LCTL set_param jobid_var=$jobid_var_old
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_new" == "$jobid_var_old" ]] ||
+		error "failed to reset jobid_var"
+
+	$LCTL set_param jobid_var $new_value ||
+		error "'set_param a b' did not accept a value containing '='"
+
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_new" == "$new_value" ]] ||
+		error "'set_param a b' failed on a value containing '='"
+
+	$LCTL set_param jobid_var $jobid_var_old
+	jobid_var_new=$($LCTL get_param -n jobid_var)
+	[[ "$jobid_var_new" == "$jobid_var_old" ]] ||
+		error "failed to reset jobid_var"
+}
+run_test 401d "Verify 'lctl set_param' accepts values containing '='"
+
 test_402() {
 	$LFS setdirstripe -i 0 $DIR/$tdir || error "setdirstripe -i 0 failed"
 #define OBD_FAIL_MDS_FLD_LOOKUP 0x15c
@@ -14445,6 +14655,61 @@ test_402() {
 }
 run_test 402 "Return ENOENT to lod_generate_and_set_lovea"
 
+test_403() {
+	local file1=$DIR/$tfile.1
+	local file2=$DIR/$tfile.2
+	local tfile=$TMP/$tfile
+
+	rm -f $file1 $file2 $tfile
+
+	touch $file1
+	ln $file1 $file2
+
+	# 30 sec OBD_TIMEOUT in ll_getattr()
+	# right before populating st_nlink
+	$LCTL set_param fail_loc=0x80001409
+	stat -c %h $file1 > $tfile &
+
+	# create an alias, drop all locks and reclaim the dentry
+	< $file2
+	cancel_lru_locks mdc
+	cancel_lru_locks osc
+	sysctl -w vm.drop_caches=2
+
+	wait
+
+	[ `cat $tfile` -gt 0 ] || error "wrong nlink count: `cat $tfile`"
+
+	rm -f $tfile $file1 $file2
+}
+run_test 403 "i_nlink should not drop to zero due to aliasing"
+
+test_404() { # LU-6601
+	local mosps=$(do_facet $SINGLEMDS $LCTL dl |
+		awk '/osp .*-osc-MDT/ { print $4}')
+
+	local osp
+	for osp in $mosps; do
+		echo "Deactivate: " $osp
+		do_facet $SINGLEMDS $LCTL --device %$osp deactivate
+		local stat=$(do_facet $SINGLEMDS $LCTL dl |
+			awk -vp=$osp '$4 == p { print $2 }')
+		[ $stat = IN ] || {
+			do_facet $SINGLEMDS $LCTL dl | grep -w $osp
+			error "deactivate error"
+		}
+		echo "Activate: " $osp
+		do_facet $SINGLEMDS $LCTL --device %$osp activate
+		local stat=$(do_facet $SINGLEMDS $LCTL dl |
+			awk -vp=$osp '$4 == p { print $2 }')
+		[ $stat = UP ] || {
+			do_facet $SINGLEMDS $LCTL dl | grep -w $osp
+			error "activate error"
+		}
+	done
+}
+run_test 404 "validate manual {de}activated works properly for OSPs"
+
 #
 # tests that do cleanup/setup should be run at the end
 #