*/
+
#include <stdlib.h>
#include <stdio.h>
-#include <portals/api-support.h>
#include <portals/ptlctl.h>
#include "obdctl.h"
#include "parser.h"
/* Network configuration commands */
{"==== network config ====", jt_noop, 0, "network config"},
+ {"--net", jt_opt_net, 0, "run <command> after setting network to <net>\n"
+ "usage: --net <tcp/elan/myrinet> <command>"},
{"network", jt_ptl_network, 0, "commands that follow apply to net\n"
- "usage: network <tcp/elan/myrinet/scimac>"},
+ "usage: network <tcp/elan/myrinet>"},
+ {"interface_list", jt_ptl_print_interfaces, 0, "print interface entries\n"
+ "usage: interface_list"},
+ {"add_interface", jt_ptl_add_interface, 0, "add interface entry\n"
+ "usage: add_interface ip [netmask]"},
+ {"del_interface", jt_ptl_del_interface, 0, "del interface entry\n"
+ "usage: del_interface [ip]"},
+ {"peer_list", jt_ptl_print_peers, 0, "print peer entries\n"
+ "usage: peer_list"},
+ {"add_peer", jt_ptl_add_peer, 0, "add an peer entry\n"
+ "usage: add_peer <nid> <host> <port>"},
+ {"del_peer", jt_ptl_del_peer, 0, "remove an peer entry\n"
+ "usage: del_peer [<nid>] [<host>] [ks]"},
+ {"conn_list", jt_ptl_print_connections, 0, "print all the connected remote nid\n"
+ "usage: conn_list"},
{"connect", jt_ptl_connect, 0, "connect to a remote nid\n"
- "usage: connect [[<hostname> <port>] | <elan id>]"},
+ "usage: connect <host> <port> [iIOC]"},
{"disconnect", jt_ptl_disconnect, 0, "disconnect from a remote nid\n"
- "usage: disconnect <nid>"},
+ "usage: disconnect [<nid>]"},
+ {"active_tx", jt_ptl_print_active_txs, 0, "print active transmits\n"
+ "usage: active_tx"},
{"mynid", jt_ptl_mynid, 0, "inform the socknal of the local nid. "
"The nid defaults to hostname for tcp networks and is automatically "
- "setup for elan/myrinet/scimac networks.\n"
- "usage: mynid [nid]"},
+ "setup for elan/myrinet networks.\n"
+ "usage: mynid [<nid>]"},
{"shownid", jt_ptl_shownid, 0, "print the local NID\n"
"usage: shownid"},
- {"add_uuid", jt_obd_add_uuid, 0, "associate a UUID with a nid\n"
+ {"add_uuid", jt_lcfg_add_uuid, 0, "associate a UUID with a nid\n"
"usage: add_uuid <uuid> <nid> <net_type>"},
{"close_uuid", jt_obd_close_uuid, 0, "disconnect a UUID\n"
- "usage: close_uuid <uuid> <net-type>)"},
- {"del_uuid", jt_obd_del_uuid, 0, "delete a UUID association\n"
+ "usage: close_uuid <uuid> <net_type>"},
+ {"del_uuid", jt_lcfg_del_uuid, 0, "delete a UUID association\n"
"usage: del_uuid <uuid>"},
{"add_route", jt_ptl_add_route, 0,
- "add an entry to the routing table\n"
- "usage: add_route <gateway> <target> [target]"},
+ "add an entry to the portals routing table\n"
+ "usage: add_route <gateway> <target> [<target>]"},
{"del_route", jt_ptl_del_route, 0,
- "delete an entry from the routing table\n"
- "usage: del_route <target>"},
- {"route_list", jt_ptl_print_routes, 0, "print the routing table\n"
+ "delete route via gateway to targets from the portals routing table\n"
+ "usage: del_route <gateway> [<target>] [<target>]"},
+ {"set_route", jt_ptl_notify_router, 0,
+ "enable/disable routes via gateway in the portals routing table\n"
+ "usage: set_route <gateway> <up/down> [<time>]"},
+ {"route_list", jt_ptl_print_routes, 0,
+ "print the portals routing table, same as show_route\n"
"usage: route_list"},
- {"recv_mem", jt_ptl_rxmem, 0, "set socket receive buffer size, "
- "if size is omited the current size is reported.\n"
- "usage: recv_mem [size]"},
- {"send_mem", jt_ptl_txmem, 0, "set socket send buffer size, "
- "if size is omited the current size is reported.\n"
- "usage: send_mem [size]"},
- {"nagle", jt_ptl_nagle, 0, "enable/disable nagle, omitting the "
- "argument will cause the current nagle setting to be reported.\n"
- "usage: nagle [on/off]"},
+ {"show_route", jt_ptl_print_routes, 0,
+ "print the portals routing table, same as route_list\n"
+ "usage: show_route"},
{"fail", jt_ptl_fail_nid, 0, "fail/restore communications.\n"
"Omitting the count means indefinitely, 0 means restore, "
"otherwise fail 'count' messages.\n"
"usage: fail nid|_all_ [count]"},
-
+
/* Device selection commands */
{"=== device selection ===", jt_noop, 0, "device selection"},
- {"newdev", jt_obd_newdev, 0, "create a new device\n"
+ {"newdev", jt_lcfg_newdev, 0, "create a new device\n"
"usage: newdev"},
{"device", jt_obd_device, 0,
"set current device to <%name|$name|devno>\n"
"usage: device <%name|$name|devno>"},
+ {"cfg_device", jt_lcfg_device, 0,
+ "set current device being configured to <$name>\n"
+ "usage: cfg_device <name>"},
{"device_list", jt_obd_list, 0, "show all devices\n"
"usage: device_list"},
+ {"dl", jt_obd_list, 0, "show all devices\n"
+ "usage: dl"},
{"lustre_build_version", jt_get_version, 0,
"print the build version of lustre\n"
"usage: lustre_build_version"},
/* Device configuration commands */
{"==== device config =====", jt_noop, 0, "device config"},
- {"attach", jt_obd_attach, 0,
+ {"attach", jt_lcfg_attach, 0,
"set the type of the current device (with <name> and <uuid>)\n"
"usage: attach type [name [uuid]]"},
- {"setup", jt_obd_setup, 0,
+ {"setup", jt_lcfg_setup, 0,
"type specific device configuration information\n"
"usage: setup <args...>"},
{"cleanup", jt_obd_cleanup, 0, "cleanup previously setup device\n"
{"detach", jt_obd_detach, 0,
"remove driver (and name and uuid) from current device\n"
"usage: detach"},
- {"lov_setconfig", jt_obd_lov_setconfig, 0,
- "write lov configuration to an mds device\n"
- "usage: lov_setconfig lov-uuid stripe-count stripe-size offset pattern UUID1 [UUID2 ...]"},
+ {"lov_setup", jt_lcfg_lov_setup, 0, "create a LOV device\n"
+ "usage: lov_setup lov-uuid stripe-count stripe-size offset pattern"},
+ {"lmv_setup", jt_lcfg_lmv_setup, 0,
+ "create an LMV device\n"
+ "usage: lmv_setup lmv-uuid UUID1 [UUID2 ...]"},
+ {"lov_modify_tgts", jt_lcfg_lov_modify_tgts, 0,
+ "add or delete an obd to/from a LOV device\n"
+ "usage: lov_modify_tgts add|del <lov-name> <uuid> <index> <gen>"},
{"lov_getconfig", jt_obd_lov_getconfig, 0,
"read lov configuration from an mds device\n"
"usage: lov_getconfig lov-uuid"},
+ {"record", jt_cfg_record, 0, "record commands that follow in log\n"
+ "usage: record cfg-uuid-name"},
+ {"endrecord", jt_cfg_endrecord, 0, "stop recording\n"
+ "usage: endrecord"},
+ {"parse", jt_cfg_parse, 0, "parse the log of recorded commands for this config\n"
+ "usage: parse config-uuid-name"},
+ {"dump_log", jt_cfg_dump_log, 0, "print log of recorded commands for this config to kernel debug log\n"
+ "usage: dump_log config-uuid-name"},
+ {"clear_log", jt_cfg_clear_log, 0, "delete current config log of recorded commands\n"
+ "usage: clear_log config-name"},
/* Device operations */
{"=== device operations ==", jt_noop, 0, "device operations"},
{"test_getattr", jt_obd_test_getattr, 0,
"do <num> getattrs (on OST object <objid> (objid+1 on each thread))\n"
"usage: test_getattr <num> [verbose [[t]objid]]"},
+ {"test_setattr", jt_obd_test_setattr, 0,
+ "do <num> setattrs (on OST object <objid> (objid+1 on each thread))\n"
+ "usage: test_setattr <num> [verbose [[t]objid]]"},
{"test_brw", jt_obd_test_brw, 0,
"do <num> bulk read/writes (<npages> per I/O, on OST object <objid>)\n"
"usage: test_brw [t]<num> [write [verbose [npages [[t]objid]]]]"},
"stop lock manager stress test (no args)\n"},
{"dump_ldlm", jt_obd_dump_ldlm, 0,
"dump all lock manager state (no args)"},
+ {"disable_recovery", jt_obd_disable_recovery, 0, "disable recovery on an import\n"},
+ {"enable_recovery", jt_obd_enable_recovery, 0, "enable recovery on an import\n"},
{"activate", jt_obd_activate, 0, "activate an import\n"},
{"deactivate", jt_obd_deactivate, 0, "deactivate an import\n"},
{"recover", jt_obd_recover, 0, "usage: recover [<connection UUID>]"},
"disable writes to the underlying device\n"},
{"abort_recovery", jt_obd_abort_recovery, 0,
"abort recovery on MDS device\n"},
- {"mount_option", jt_obd_mount_option, 0,
- "dump mount options to file\n"},
+ {"root_squash", jt_obd_root_squash, 0,
+ "squash root to 'uid:gid' except client 'nid'\n"
+ "usage: root_squash [uid:gid [nid]]\n"},
+ {"start", jt_obd_start, 0,
+ "setup mds/ost from the llog file\n"
+ "usage: start <profilename>"},
+ {"mount_option", jt_lcfg_mount_option, 0,
+ "usage: mount_option profile osc_name [mdc_name] \n"},
+ {"del_mount_option", jt_lcfg_del_mount_option, 0,
+ "usage: del_mount_option profile\n"},
+ {"set_timeout", jt_lcfg_set_timeout, 0,
+ "usage: set_timeout <secs>\n"},
+ {"set_lustre_upcall", jt_lcfg_set_lustre_upcall, 0,
+ "usage: set_lustre_upcall </full/path/to/upcall> \n"},
+ {"add_conn ", jt_lcfg_add_conn, 0,
+ "usage: add_conn <conn_uuid> [priority]\n"},
+ {"del_conn ", jt_lcfg_del_conn, 0,
+ "usage: del_conn <conn_uuid> \n"},
+ {"set_security", jt_lcfg_set_security, 0,
+ "usage: set_security key value\n"},
+ {"lsync", jt_obd_reint_sync, 0,
+ "usage: lsync\n"},
+ {"cache_on", jt_obd_cache_on, 0,
+ "usage: lsync\n"},
+ {"cache_off", jt_obd_cache_off, 0,
+ "usage: lsync\n"},
+ /*snap operations*/
+ {"snap_add", jt_obd_snap_add, 0,
+ "usage: snap_add <dev_name> <snap_name>\n"},
+ /* Llog operations */
+ {"llog_catlist", jt_llog_catlist, 0,
+ "list all catalog logs on current device.\n"
+ "usage: llog_catlist"},
+ {"llog_info", jt_llog_info, 0,
+ "print log header information.\n"
+ "usage: llog_info <$logname|#oid#ogr#ogen>\n"
+ " oid, ogr and ogen are hexadecimal."},
+ {"llog_print", jt_llog_print, 0,
+ "print log content information.\n"
+ "usage: llog_print <$logname|#oid#ogr#ogen> [from] [to]\n"
+ " oid, ogr and ogen are hexadecimal.\n"
+ " print all records from index 1 by default."},
+ {"llog_check", jt_llog_check, 0,
+ "print log content information.\n"
+ "usage: llog_check <$logname|#oid#ogr#ogen> [from] [to]\n"
+ " oid, ogr and ogen are hexadecimal.\n"
+ " check all records from index 1 by default."},
+ {"llog_cancel", jt_llog_cancel, 0,
+ "cancel one record in log.\n"
+ "usage: llog_cancel <catalog id|catalog name> <log id> <index>"},
+ {"llog_remove", jt_llog_remove, 0,
+ "remove one log from catalog, erase it from disk.\n"
+ "usage: llog_remove <catalog id|catalog name> <log id>"},
/* Debug commands */
{"======== debug =========", jt_noop, 0, "debug"},
{"debug_daemon", jt_dbg_debug_daemon, 0,
- "debug daemon control and dump to a file"
- "usage: debug_daemon [start file <#MB>|stop|pause|continue]"},
+ "debug daemon control and dump to a file\n"
+ "usage: debug_daemon {start file [#MB]|stop}"},
{"debug_kernel", jt_dbg_debug_kernel, 0,
- "get debug buffer and dump to a file"
+ "get debug buffer and dump to a file, same as dk\n"
"usage: debug_kernel [file] [raw]"},
{"dk", jt_dbg_debug_kernel, 0,
- "get debug buffer and dump to a file"
+ "get debug buffer and dump to a file, same as debug_kernel\n"
"usage: dk [file] [raw]"},
{"debug_file", jt_dbg_debug_file, 0,
- "read debug buffer from input and dump to output"
+ "read debug buffer from input and dump to output, same as df\n"
"usage: debug_file <input> [output] [raw]"},
+ {"df", jt_dbg_debug_file, 0,
+ "read debug buffer from input and dump to output, same as debug_file\n"
+ "usage: df <input> [output] [raw]"},
{"clear", jt_dbg_clear_debug_buf, 0, "clear kernel debug buffer\n"
"usage: clear"},
{"mark", jt_dbg_mark_debug_buf, 0,"insert marker text in kernel debug buffer\n"
"usage: mark <text>"},
{"filter", jt_dbg_filter, 0, "filter message type\n"
"usage: filter <subsystem id/debug mask>"},
- {"show", jt_dbg_show, 0, "show message type\n"
+ {"show", jt_dbg_show, 0, "Show specific type of messages\n"
"usage: show <subsystem id/debug mask>"},
{"debug_list", jt_dbg_list, 0, "list subsystem and debug types\n"
"usage: debug_list <subs/types>"},
"usage: modules <path>"},
{"panic", jt_dbg_panic, 0, "force the kernel to panic\n"
"usage: panic"},
-
+ {"lwt", jt_ptl_lwt, 0,
+ "light-weight tracing\n"
+ "usage: lwt start\n"
+ " lwt stop [file]"},
+ {"memhog", jt_ptl_memhog, 0,
+ "memory pressure testing\n"
+ "usage: memhog <page count> [<gfp flags>]"},
+
/* User interface commands */
{"======= control ========", jt_noop, 0, "control commands"},
{"help", Parser_help, 0, "help"},
{ 0, 0, 0, NULL }
};
-
-
-int main(int argc, char **argv)
+int lctl_main(int argc, char **argv)
{
int rc;
rc = Parser_commands();
}
- obd_cleanup(argc, argv);
+ obd_finalize(argc, argv);
return rc;
}
+#if !LIBLUSTRE_TEST
+int main (int argc, char **argv)
+{
+ return (lctl_main (argc, argv));
+}
+#endif