set -e
ONLY=${ONLY:-"$*"}
-# bug number for skipped test: 13297 2108 9789 3637 9789 3561 12622 15528/2330 5188 10764
-ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27u 42a 42b 42c 42d 45 51d 62 68 75 $SANITY_EXCEPT" }
+# bug number for skipped test: 13297 2108 9789 3637 9789 3561 12622 15528/2330 5188 10764 16410
+ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"27u 42a 42b 42c 42d 45 51d 62 68 75 76 $SANITY_EXCEPT"}
# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
# Tests that fail on uml, maybe elsewhere, FIXME
LFS=${LFS:-lfs}
SETSTRIPE=${SETSTRIPE:-"$LFS setstripe"}
GETSTRIPE=${GETSTRIPE:-"$LFS getstripe"}
-LSTRIPE=${LSTRIPE:-"$LFS setstripe"}
LFIND=${LFIND:-"$LFS find"}
LVERIFY=${LVERIFY:-ll_dirstripe_verify}
LSTRIPEINFO=${LSTRIPEINFO:-ll_getstripe_info}
[ "$SLOW" = "no" ] && EXCEPT_SLOW="24o 27m 36f 36g 51b 51c 60c 63 64b 68 71 73 77f 78 101 103 115 120g 124b"
SANITYLOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-FAIL_ON_ERROR=false
+FAIL_ON_ERROR=${FAIL_ON_ERROR:-false}
cleanup() {
echo -n "cln.."
VERSION_FILE=version
WANT_VER=$1
GOT_VER=$(lctl get_param -n $VERSION_FILE | awk '/kernel:/ {print $2}')
- [ $GOT_VER == "patchless" ] && return 0
- [ $GOT_VER -ge $WANT_VER ] && return 0
+ case $GOT_VER in
+ patchless|patchless_client) return 0;;
+ *) [ $GOT_VER -ge $WANT_VER ] && return 0 ;;
+ esac
log "test needs at least kernel version $WANT_VER, running $GOT_VER"
return 1
}
# $RUNAS_ID may get set incorrectly somewhere else
[ $UID -eq 0 -a $RUNAS_ID -eq 0 ] && error "\$RUNAS_ID set to 0, but \$UID is also 0!"
-check_runas_id $RUNAS_ID $RUNAS
+check_runas_id $RUNAS_ID $RUNAS_ID $RUNAS
build_test_filter
}
run_test 0b "chmod 0755 $DIR ============================="
+test_0c() {
+ $LCTL get_param mdc.*.import | grep "state: FULL" || error "import not FULL"
+ $LCTL get_param mdc.*.import | grep "target: $FSNAME-MDT" || error "bad target"
+}
+run_test 0c "check import proc ============================="
+
test_1a() {
mkdir $DIR/d1
mkdir $DIR/d1/d2
}
run_test 17e "symlinks: create recursive symlink (should return error) ===="
+test_17g() {
+ mkdir -p $DIR/$tdir
+ LONGSYMLINK="$(dd if=/dev/zero bs=4095 count=1 | tr '\0' 'x')"
+ ln -s $LONGSYMLINK $DIR/$tdir/$tfile
+ ls -l $DIR/$tdir
+}
+run_test 17g "symlinks: really long symlink name ==============================="
+
test_18() {
touch $DIR/f
ls $DIR || error
run_test 24d "mkdir .../R4/{f,g}; rename .../R4/f .../R4/g ====="
test_24e() {
- echo '-- cross directory renames --'
+ echo '-- cross directory renames --'
mkdir $DIR/R5{a,b}
touch $DIR/R5a/f
mv $DIR/R5a/f $DIR/R5b/g
$CHECKSTAT -a $DIR/R10/f || error
$CHECKSTAT -a $DIR/R10/g || error
}
-run_test 24j "source does not exist ============================"
+run_test 24j "source does not exist ============================"
test_24k() {
mkdir $DIR/R11a $DIR/R11a/d
test_27d() {
mkdir -p $DIR/d27
- $SETSTRIPE $DIR/d27/fdef 0 -1 0 || error "lstripe failed"
+ $SETSTRIPE -c0 -i-1 -s0 $DIR/d27/fdef || error "lstripe failed"
$CHECKSTAT -t file $DIR/d27/fdef || error "checkstat failed"
dd if=/dev/zero of=$DIR/d27/fdef bs=4k count=4 || error
}
[ "$1" ] && FAIL_LOC=$1 || FAIL_LOC=0
mkdir -p $DIR/d27/nospc
rmdir $DIR/d27/nospc
- lctl set_param fail_loc=$FAIL_LOC
+ do_nodes $(comma_list $(osts_nodes)) lctl set_param fail_loc=$FAIL_LOC
}
exhaust_precreations() {
OSTIDX=$1
- OST=$(lctl get_param -n lov.${LOVNAME}.target_obd | grep ${OSTIDX}": " | \
+
+ OST=$(lfs osts | grep ${OSTIDX}": " | \
awk '{print $2}' | sed -e 's/_UUID$//')
# on the mdt's osc
- last_id=$(lctl get_param -n osc.${OST}-osc.prealloc_last_id)
- next_id=$(lctl get_param -n osc.${OST}-osc.prealloc_next_id)
+ last_id=$(do_facet mds lctl get_param -n osc.${OST}-osc.prealloc_last_id)
+ next_id=$(do_facet mds lctl get_param -n osc.${OST}-osc.prealloc_next_id)
mkdir -p $DIR/d27/${OST}
$SETSTRIPE $DIR/d27/${OST} -i $OSTIDX -c 1
#define OBD_FAIL_OST_ENOSPC 0x215
- lctl set_param fail_loc=0x215
+ do_facet ost$((OSTIDX + 1)) lctl set_param fail_loc=0x215
echo "Creating to objid $last_id on ost $OST..."
createmany -o $DIR/d27/${OST}/f $next_id $((last_id - next_id + 2))
- lctl get_param -n osc.${OST}-osc.prealloc* | grep '[0-9]'
+ do_facet mds "lctl get_param -n osc.${OST}-osc.prealloc*" | grep '[0-9]'
reset_enospc $2
}
test_27n() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/d27/f27n
test_27o() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/d27/f27o
test_27p() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/d27/f27p
test_27q() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/d27/f27q
test_27r() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_enospc
rm -f $DIR/d27/f27r
test_27s() { # bug 10725
mkdir -p $DIR/$tdir
- $LSTRIPE $DIR/$tdir $((2048 * 1024 * 1024)) -1 2 && \
+ $SETSTRIPE $DIR/$tdir $((4096 * 1024 * 1024)) -1 2 && \
error "stripe width >= 2^32 succeeded" || true
}
run_test 27s "lsm_xfersize overflow (should error) (bug 10725)"
run_test 27t "check that utils parse path correctly"
test_27u() { # bug 4900
- [ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
#define OBD_FAIL_MDS_OSC_PRECREATE 0x139
- lctl set_param fail_loc=0x139
+ do_facet mds lctl set_param fail_loc=0x139
mkdir -p $DIR/d27u
createmany -o $DIR/d27u/t- 1000
- lctl set_param fail_loc=0
+ do_facet mds lctl set_param fail_loc=0
TLOG=$DIR/$tfile.getstripe
$GETSTRIPE $DIR/d27u > $TLOG
test_27v() { # bug 4900
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
exhaust_all_precreations
test_27w() { # bug 10997
mkdir -p $DIR/d27w || error "mkdir failed"
- $LSTRIPE $DIR/d27w/f0 -s 65536 || error "lstripe failed"
+ $SETSTRIPE $DIR/d27w/f0 -s 65536 || error "lstripe failed"
size=`$LSTRIPEINFO $DIR/d27w/f0 | awk {'print $1'}`
[ $size -ne 65536 ] && error "stripe size $size != 65536" || true
[ "$OSTCOUNT" -lt "2" ] && skip "skipping multiple stripe count/offset test" && return
for i in `seq 1 $OSTCOUNT`; do
offset=$(($i-1))
- $LSTRIPE $DIR/d27w/f$i -c $i -i $offset || error "lstripe -c $i -i $offset failed"
+ log setstripe $DIR/d27w/f$i -c $i -i $offset
+ $SETSTRIPE $DIR/d27w/f$i -c $i -i $offset || error "lstripe -c $i -i $offset failed"
count=`$LSTRIPEINFO $DIR/d27w/f$i | awk {'print $2'}`
index=`$LSTRIPEINFO $DIR/d27w/f$i | awk {'print $3'}`
[ $count -ne $i ] && error "stripe count $count != $i" || true
ls -l $DIR/d29
LOCKCOUNTORIG=`lctl get_param -n ldlm.namespaces.*mdc*.lock_count`
LOCKUNUSEDCOUNTORIG=`lctl get_param -n ldlm.namespaces.*mdc*.lock_unused_count`
- [ -z $"LOCKCOUNTORIG" ] && echo "No mdc lock count" && return 1
+ [ -z $"LOCKCOUNTORIG" ] && error "No mdc lock count" && return 1
log 'second d29'
ls -l $DIR/d29
log 'done'
test_32a() {
echo "== more mountpoints and symlinks ================="
[ -e $DIR/d32a ] && rm -fr $DIR/d32a
- mkdir -p $DIR/d32a/ext2-mountpoint
+ mkdir -p $DIR/d32a/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32a/ext2-mountpoint || error
- $CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
+ $CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32a/ext2-mountpoint || error
}
run_test 32a "stat d32a/ext2-mountpoint/.. ====================="
test_32b() {
[ -e $DIR/d32b ] && rm -fr $DIR/d32b
- mkdir -p $DIR/d32b/ext2-mountpoint
+ mkdir -p $DIR/d32b/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32b/ext2-mountpoint || error
ls -al $DIR/d32b/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32b/ext2-mountpoint || error
}
run_test 32b "open d32b/ext2-mountpoint/.. ====================="
-
+
test_32c() {
[ -e $DIR/d32c ] && rm -fr $DIR/d32c
- mkdir -p $DIR/d32c/ext2-mountpoint
+ mkdir -p $DIR/d32c/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32c/ext2-mountpoint || error
- mkdir -p $DIR/d32c/d2/test_dir
+ mkdir -p $DIR/d32c/d2/test_dir
$CHECKSTAT -t dir $DIR/d32c/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32c/ext2-mountpoint || error
}
test_32d() {
[ -e $DIR/d32d ] && rm -fr $DIR/d32d
- mkdir -p $DIR/d32d/ext2-mountpoint
+ mkdir -p $DIR/d32d/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32d/ext2-mountpoint || error
- mkdir -p $DIR/d32d/d2/test_dir
+ mkdir -p $DIR/d32d/d2/test_dir
ls -al $DIR/d32d/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32d/ext2-mountpoint || error
}
test_32e() {
[ -e $DIR/d32e ] && rm -fr $DIR/d32e
- mkdir -p $DIR/d32e/tmp
- TMP_DIR=$DIR/d32e/tmp
- ln -s $DIR/d32e $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32e/tmp
+ TMP_DIR=$DIR/d32e/tmp
+ ln -s $DIR/d32e $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32e/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32e/symlink01 || error
}
test_32f() {
[ -e $DIR/d32f ] && rm -fr $DIR/d32f
- mkdir -p $DIR/d32f/tmp
- TMP_DIR=$DIR/d32f/tmp
- ln -s $DIR/d32f $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32f/tmp
+ TMP_DIR=$DIR/d32f/tmp
+ ln -s $DIR/d32f $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls $DIR/d32f/tmp/symlink11 || error
ls $DIR/d32f/symlink01 || error
}
run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir ===="
test_32g() {
- TMP_DIR=$DIR/$tdir/tmp
+ TMP_DIR=$DIR/$tdir/tmp
mkdir -p $TMP_DIR $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $TMP_DIR/symlink12 || error
$CHECKSTAT -t link $DIR/$tdir/symlink02 || error
$CHECKSTAT -t dir -f $TMP_DIR/symlink12 || error
test_32h() {
rm -fr $DIR/$tdir $DIR/${tdir}2
- TMP_DIR=$DIR/$tdir/tmp
- mkdir -p $TMP_DIR $DIR/${tdir}2
- ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ TMP_DIR=$DIR/$tdir/tmp
+ mkdir -p $TMP_DIR $DIR/${tdir}2
+ ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
ls $TMP_DIR/symlink12 || error
ls $DIR/$tdir/symlink02 || error
}
test_32i() {
[ -e $DIR/d32i ] && rm -fr $DIR/d32i
- mkdir -p $DIR/d32i/ext2-mountpoint
+ mkdir -p $DIR/d32i/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32i/ext2-mountpoint || error
touch $DIR/d32i/test_file
- $CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
+ $CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
$UMOUNT $DIR/d32i/ext2-mountpoint || error
}
run_test 32i "stat d32i/ext2-mountpoint/../test_file ==========="
test_32j() {
[ -e $DIR/d32j ] && rm -fr $DIR/d32j
- mkdir -p $DIR/d32j/ext2-mountpoint
+ mkdir -p $DIR/d32j/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32j/ext2-mountpoint || error
touch $DIR/d32j/test_file
cat $DIR/d32j/ext2-mountpoint/../test_file || error
test_32k() {
rm -fr $DIR/d32k
- mkdir -p $DIR/d32k/ext2-mountpoint
- mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
+ mkdir -p $DIR/d32k/ext2-mountpoint
+ mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
mkdir -p $DIR/d32k/d2
touch $DIR/d32k/d2/test_file || error
$CHECKSTAT -t file $DIR/d32k/ext2-mountpoint/../d2/test_file || error
test_32l() {
rm -fr $DIR/d32l
- mkdir -p $DIR/d32l/ext2-mountpoint
+ mkdir -p $DIR/d32l/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32l/ext2-mountpoint || error
mkdir -p $DIR/d32l/d2
touch $DIR/d32l/d2/test_file
test_32m() {
rm -fr $DIR/d32m
- mkdir -p $DIR/d32m/tmp
- TMP_DIR=$DIR/d32m/tmp
- ln -s $DIR $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32m/tmp
+ TMP_DIR=$DIR/d32m/tmp
+ ln -s $DIR $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32m/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32m/symlink01 || error
}
test_32n() {
rm -fr $DIR/d32n
- mkdir -p $DIR/d32n/tmp
- TMP_DIR=$DIR/d32n/tmp
- ln -s $DIR $TMP_DIR/symlink11
- ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
+ mkdir -p $DIR/d32n/tmp
+ TMP_DIR=$DIR/d32n/tmp
+ ln -s $DIR $TMP_DIR/symlink11
+ ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls -l $DIR/d32n/tmp/symlink11 || error
ls -l $DIR/d32n/symlink01 || error
}
test_32o() {
rm -fr $DIR/d32o $DIR/$tfile
- touch $DIR/$tfile
- mkdir -p $DIR/d32o/tmp
- TMP_DIR=$DIR/d32o/tmp
- ln -s $DIR/$tfile $TMP_DIR/symlink12
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ touch $DIR/$tfile
+ mkdir -p $DIR/d32o/tmp
+ TMP_DIR=$DIR/d32o/tmp
+ ln -s $DIR/$tfile $TMP_DIR/symlink12
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $DIR/d32o/tmp/symlink12 || error
$CHECKSTAT -t link $DIR/d32o/symlink02 || error
$CHECKSTAT -t file -f $DIR/d32o/tmp/symlink12 || error
log 32p_2
rm -f $DIR/$tfile
log 32p_3
- touch $DIR/$tfile
+ touch $DIR/$tfile
log 32p_4
- mkdir -p $DIR/d32p/tmp
+ mkdir -p $DIR/d32p/tmp
log 32p_5
- TMP_DIR=$DIR/d32p/tmp
+ TMP_DIR=$DIR/d32p/tmp
log 32p_6
- ln -s $DIR/$tfile $TMP_DIR/symlink12
+ ln -s $DIR/$tfile $TMP_DIR/symlink12
log 32p_7
- ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
log 32p_9
run_test 34b "O_RDONLY opening file doesn't create objects ====="
test_34c() {
- [ ! -f $DIR/f34 ] && test_34a
+ [ ! -f $DIR/f34 ] && test_34a
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
$OPENFILE -f O_RDWR $DIR/f34
$GETSTRIPE $DIR/f34 2>&1 | grep -q "no stripe info" && error
run_test 34c "O_RDWR opening file-with-size works =============="
test_34d() {
- [ ! -f $DIR/f34 ] && test_34a
+ [ ! -f $DIR/f34 ] && test_34a
dd if=/dev/zero of=$DIR/f34 conv=notrunc bs=4k count=1 || error
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
rm $DIR/f34
run_test 36f "utime on file racing with OST BRW write =========="
test_36g() {
- remote_ost && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ mkdir -p $DIR/$tdir
export FMD_MAX_AGE=`do_facet ost1 lctl get_param -n obdfilter.*.client_cache_seconds 2> /dev/null | head -n 1`
FMD_BEFORE="`awk '/ll_fmd_cache/ { print $2 }' /proc/slabinfo`"
- touch $DIR/d36/$tfile
+ touch $DIR/$tdir/$tfile
sleep $((FMD_MAX_AGE + 12))
FMD_AFTER="`awk '/ll_fmd_cache/ { print $2 }' /proc/slabinfo`"
[ "$FMD_AFTER" -gt "$FMD_BEFORE" ] && \
}
run_test 39 "mtime changed on create ==========================="
+function get_times() {
+ FILE=$1
+ TIME=$2
+
+ i=0
+ for time in `stat -c "%X %Y %Z" $FILE`; do
+ eval "$TIME[$i]=$time"
+ i=$(($i + 1))
+ done
+}
+
+test_39b() {
+ ATIME=0
+ MTIME=1
+ CTIME=2
+ mkdir -p $DIR/$tdir
+ cp -p /etc/passwd $DIR/$tdir/fopen
+ cp -p /etc/passwd $DIR/$tdir/flink
+ cp -p /etc/passwd $DIR/$tdir/funlink
+ cp -p /etc/passwd $DIR/$tdir/frename
+ ln $DIR/$tdir/funlink $DIR/$tdir/funlink2
+
+ get_times $DIR/$tdir/fopen OPEN_OLD
+ get_times $DIR/$tdir/flink LINK_OLD
+ get_times $DIR/$tdir/funlink UNLINK_OLD
+ get_times $DIR/$tdir/frename RENAME_OLD
+
+ sleep 1
+ echo "aaaaaa" >> $DIR/$tdir/fopen
+ echo "aaaaaa" >> $DIR/$tdir/flink
+ echo "aaaaaa" >> $DIR/$tdir/funlink
+ echo "aaaaaa" >> $DIR/$tdir/frename
+
+ get_times $DIR/$tdir/fopen OPEN_NEW
+ get_times $DIR/$tdir/flink LINK_NEW
+ get_times $DIR/$tdir/funlink UNLINK_NEW
+ get_times $DIR/$tdir/frename RENAME_NEW
+
+ cat $DIR/$tdir/fopen > /dev/null
+ ln $DIR/$tdir/flink $DIR/$tdir/flink2
+ rm -f $DIR/$tdir/funlink2
+ mv -f $DIR/$tdir/frename $DIR/$tdir/frename2
+
+ get_times $DIR/$tdir/fopen OPEN_NEW2
+ get_times $DIR/$tdir/flink LINK_NEW2
+ get_times $DIR/$tdir/funlink UNLINK_NEW2
+ get_times $DIR/$tdir/frename2 RENAME_NEW2
+ echo ${OPEN_OLD[1]},${OPEN_NEW[$MTIME]},${OPEN_NEW2[$MTIME]}
+ echo ${LINK_OLD[1]},${LINK_NEW[$MTIME]},${LINK_NEW2[$MTIME]}
+ echo ${UNLINK_OLD[1]},${UNLINK_NEW[$MTIME]},${UNLINK_NEW2[$MTIME]}
+ echo ${RENAME_OLD[1]},${RENAME_NEW[$MTIME]},${RENAME_NEW2[$MTIME]}
+
+ [ ${OPEN_NEW2[$MTIME]} -eq ${OPEN_NEW[$MTIME]} ] || error "open file reverses mtime"
+ [ ${LINK_NEW2[$MTIME]} -eq ${LINK_NEW[$MTIME]} ] || error "link file reverses mtime"
+ [ ${UNLINK_NEW2[$MTIME]} -eq ${UNLINK_NEW[$MTIME]} ] || error "unlink file reverses mtime"
+ [ ${RENAME_NEW2[$MTIME]} -eq ${RENAME_NEW[$MTIME]} ] || error "rename file reverses mtime"
+}
+run_test 39b "mtime change on close ============================"
+
+# bug 11063
+test_39c() {
+ touch -m -d "10 years ago" $DIR1/$tfile
+ local MTIME1=`stat -c %y $DIR1/$tfile`
+ echo hello >> $DIR1/$tfile
+ local MTIME2=`stat -c %y $DIR1/$tfile`
+ mv $DIR1/$tfile $DIR1/$tfile-1
+ local MTIME3=`stat -c %y $DIR1/$tfile-1`
+ [ "$MTIME2" = "$MTIME3" ] ||
+ error "mtime ($MTIME2) changed (to $MTIME3) on rename (BZ#11063)"
+}
+run_test 39c "mtime change on rename ==========================="
+
test_40() {
dd if=/dev/zero of=$DIR/f40 bs=4096 count=1
$RUNAS $OPENFILE -f O_WRONLY:O_TRUNC $DIR/f40 && error
# in a 2 stripe file (lov.sh), page 1023 maps to page 511 in its object. this
# test tickles a bug where re-dirtying a page was failing to be mapped to the
-# objects offset and an assert hit when an rpc was built with 1023's mapped
+# objects offset and an assert hit when an rpc was built with 1023's mapped
# offset 511 and 511's raw 511 offset. it also found general redirtying bugs.
test_46() {
f="$DIR/f46"
error "OST $N has less objects vs OST $NLAST (${OBJS[$N]} < ${OBJS[$NLAST]}"
[ ${OBJS[$N]} -gt $((${OBJS[$NLAST]} + 20)) ] && \
error "OST $N has less objects vs OST $NLAST (${OBJS[$N]} < ${OBJS[$NLAST]}"
-
+
[ ${OBJS0[$N]} -lt $((${OBJS0[$NLAST]} - 20)) ] && \
error "OST $N has less #0 objects vs OST $NLAST (${OBJS0[$N]} < ${OBJS0[$NLAST]}"
[ ${OBJS0[$N]} -gt $((${OBJS0[$NLAST]} + 20)) ] && \
run_test 52c "immutable flag test for client < 1.4.7 ======="
test_53() {
- remote_mds && skip "remote MDS" && return
-
- for VALUE in `lctl get_param osc.*-osc.prealloc_last_id`; do
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ local param
+ local ostname
+ local mds_last
+ local ost_last
+ local ostnum
+
+ for VALUE in $(do_facet mds lctl get_param osc.*-osc.prealloc_last_id); do
param=`echo ${VALUE[0]} | cut -d "=" -f1`;
ostname=`echo $param | cut -d "." -f2 | cut -d - -f 1-2`
- mds_last=`lctl get_param -n $param`
- ost_last=`lctl get_param -n obdfilter.$ostname.last_id`
+ mds_last=$(do_facet mds lctl get_param -n $param)
+ ostnum=$(echo $ostname | sed "s/${FSNAME}-OST//g" | awk '{print ($1+1)}' )
+ ost_last=$(do_facet ost$ostnum lctl get_param -n obdfilter.$ostname.last_id)
echo "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
if [ $ost_last != $mds_last ]; then
error "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
f="$DIR/f54b"
mknod $f c 1 3
chmod 0666 $f
- dd if=/dev/zero of=$f bs=`page_size` count=1
+ dd if=/dev/zero of=$f bs=`page_size` count=1
}
run_test 54b "char device works in lustre ======================"
tdir="$DIR/d54c"
loopdev="$DIR/loop54c"
- find_loop_dev
+ find_loop_dev
[ -z "$LOOPNUM" ] && echo "couldn't find empty loop device" && return
mknod $loopdev b 7 $LOOPNUM
echo "make a loop file system with $tfile on $loopdev ($LOOPNUM)..."
}
test_56g() {
- $LSTRIPE -d $DIR
+ $SETSTRIPE -d $DIR
setup_56 $NUMFILES $NUMDIRS
run_test 56g "check lfs find -name ============================="
test_56h() {
- $LSTRIPE -d $DIR
+ $SETSTRIPE -d $DIR
setup_56 $NUMFILES $NUMDIRS
run_test 56q "check lfs find -gid and ! -gid ==============================="
test_57a() {
- remote_mds && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+
local MNTDEV="mds.*.mntdev"
- DEV=$(lctl get_param -n $MNTDEV)
- [ -z "$DEV" ] && error "can't access $MNTDEV"
- for DEV in `lctl get_param -n $MNTDEV`; do
- dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
+ DEV=$(do_facet mds lctl get_param -n $MNTDEV)
+ [ -z "$DEV" ] && error "can't access $MNTDEV"
+ for DEV in $(do_facet mds lctl get_param -n $MNTDEV); do
+ do_facet mds dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
DEVISIZE=`awk '/Inode size:/ { print $3 }' $TMP/t57a.dump`
[ "$DEVISIZE" -gt 128 ] || error "inode size $DEVISIZE"
rm $TMP/t57a.dump
run_test 60b "limit repeated messages from CERROR/CWARN ========"
test_60c() {
- echo "create 5000 files"
+ echo "create 5000 files"
createmany -o $DIR/f60c- 5000
#define OBD_FAIL_MDS_LLOG_CREATE_FAILED 0x137
lctl set_param fail_loc=0x80000137
touch $DIR/d65/f6
$LVERIFY $DIR/d65 $DIR/d65/f6 || error "lverify failed"
}
-run_test 65e "directory setstripe 0 -1 0 ======================="
+run_test 65e "directory setstripe defaults ======================="
test_65f() {
mkdir -p $DIR/d65f
"`$GETSTRIPE -v $DIR/d65/dd1 | grep "^count"`" ] || error "stripe info inherit failed"
}
run_test 65h "directory stripe info inherit ===================="
-
+
test_65i() { # bug6367
- $SETSTRIPE $MOUNT -s 65536 -c -1
+ $SETSTRIPE $MOUNT -s 65536 -c -1
}
run_test 65i "set non-default striping on root directory (bug 6367)="
test_65k() { # bug11679
[ "$OSTCOUNT" -lt 2 ] && skip "too few OSTs" && return
- remote_mds_nodsh && skip "remote MDS" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
echo "Check OST status: "
MDS_OSCS=`do_facet mds lctl dl | awk '/[oO][sS][cC].*md[ts]/ { print $4 }'`
chgrp $RUNAS_ID $DIR/$tdir
$RUNAS -u $RUNAS_ID -g $(($RUNAS_ID + 1)) -G1,2,$RUNAS_ID ls $DIR/$tdir
RC=$?
- GROUP_UPCALL=`lctl get_param -n mds.*.group_upcall`
+ GROUP_UPCALL=$(do_facet mds lctl get_param -n mds.*.group_upcall)
+ [ -z "$GROUP_UPCALL" ] && \
+ skip "lctl get_param failed! Useless to continue the test!" && return
[ "$GROUP_UPCALL" = "NONE" -a $RC -eq 0 ] && \
error "no-upcall passed" || true
[ "$GROUP_UPCALL" != "NONE" -a $RC -ne 0 ] && \
cleanup_67b() {
set +vx
trap 0
- lctl set_param -n mds.$MDS.group_upcall NONE
+ do_facet mds lctl set_param -n mds.*.group_upcall NONE
}
test_67b() { # bug 3285 - supplementary group fails on MDS, passes on client
- T67_UID=${T67_UID:-1} # needs to be in /etc/groups on MDS, gid == uid
+ # needs to be in /etc/groups on MDS, gid == uid
+ # Let's use RUNAS_ID
+ T67_UID=${T67_UID:-$RUNAS_ID}
+
[ "$UID" = "$T67_UID" ] && skip "UID = T67_UID = $UID -- skipping" && return
check_kernel_version 35 || return 0
- remote_mds && skip "remote MDS" && return
- GROUP_UPCALL=`lctl get_param -n mds.$MDS.group_upcall`
- [ "$GROUP_UPCALL" != "NONE" ] && skip "skip test - upcall" &&return
+ do_facet mds grep -q ":$T67_UID:$T67_UID" /etc/passwd || \
+ { skip "Need gid=$T67_UID group and gid == uid on mds !" && return; }
+
+ GROUP_UPCALL=$(do_facet mds lctl get_param -n mds.*.group_upcall)
+ [ -z "$GROUP_UPCALL" ] && \
+ skip "lctl get_param failed! Useless to continue the test!" && return
+ [ "$GROUP_UPCALL" != "NONE" ] && \
+ skip "skip test - upcall=$GROUP_UPCALL" && return
set -vx
trap cleanup_67b EXIT
mkdir -p $DIR/$tdir
chmod 771 $DIR/$tdir
chgrp $T67_UID $DIR/$tdir
- lctl set_param -n mds.$MDS.group_upcall `which l_getgroups`
- l_getgroups -d $T67_UID
+ local l_getgroups=$(do_facet mds which l_getgroups)
+ do_facet mds lctl set_param -n mds.*.group_upcall $l_getgroups
+ do_facet mds $l_getgroups -d $T67_UID
$RUNAS -u $T67_UID -g 999 -G8,9,$T67_UID touch $DIR/$tdir/$tfile || \
error "'touch $DIR/$tdir/$tfile' failed"
[ -f $DIR/$tdir/$tfile ] || error "$DIR/$tdir/$tfile create error"
# bug5265, obdfilter oa2dentry return -ENOENT
# #define OBD_FAIL_OST_ENOENT 0x217
test_69() {
- [ $(lctl get_param -n devices | grep -c obdfilter) -eq 0 ] &&
- skip "skipping test for remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
f="$DIR/$tfile"
- touch $f
+ $SETSTRIPE $f -c 1 -i 0
$DIRECTIO write ${f}.2 0 1 || error "directio write error"
#define OBD_FAIL_OST_ENOENT 0x217
- lctl set_param fail_loc=0x217
+ do_facet ost1 lctl set_param fail_loc=0x217
truncate $f 1 # vmtruncate() will ignore truncate() error.
$DIRECTIO write $f 0 2 && error "write succeeded, expect -ENOENT"
- lctl set_param fail_loc=0
+ do_facet ost1 lctl set_param fail_loc=0
$DIRECTIO write $f 0 2 || error "write error"
cancel_lru_locks osc
$DIRECTIO read $f 0 1 || error "read error"
#define OBD_FAIL_OST_ENOENT 0x217
- lctl set_param fail_loc=0x217
+ do_facet ost1 lctl set_param fail_loc=0x217
$DIRECTIO read $f 1 1 && error "read succeeded, expect -ENOENT"
- lctl set_param fail_loc=0
+ do_facet ost1 lctl set_param fail_loc=0
rm -f $f
}
run_test 69 "verify oa2dentry return -ENOENT doesn't LBUG ======"
test_71() {
- which dbench > /dev/null 2>&1 || { skip "dbench not installed, skip this test" && return 0; }
- DBENCH_LIB=${DBENCH_LIB:-/usr/lib/dbench}
- PATH=${DBENCH_LIB}:${PATH}
- cp `which dbench` $DIR
-
- TGT=$DIR/client.txt
- SRC=${SRC:-$DBENCH_LIB/client.txt}
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- SRC=$DBENCH_LIB/client_plain.txt
- [ ! -e $TGT -a -e $SRC ] && echo "copying $SRC to $TGT" && cp $SRC $TGT
- echo "copying necessary libs to $DIR"
- LIBS71=$(ldd $DIR/dbench|sed -e 's/\t*//' -e 's/.*=> //' -e 's/ .*//' -e 's/^\///')
- (cd / && tar chf - $LIBS71) | (cd $DIR && tar xvf -)
- [ $? = 0 ] || error "can't copy libs $LIBS71 to $DIR"
- echo "chroot $DIR /dbench -c client.txt 2"
- chroot $DIR /dbench -c client.txt 2
- RC=$?
-
- rm -rf $DIR/dbench $DIR/lib $DIR/lib64
-
- return $RC
+ sh rundbench -C -D $DIR 2 || error "dbench failed!"
}
run_test 71 "Running dbench on lustre (don't segment fault) ===="
[ "$RUNAS_ID" = "$UID" ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
# Check that testing environment is properly set up. Skip if not
- FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS || {
+ FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS_ID $RUNAS || {
skip "User $RUNAS_ID does not exist - skipping"
return 0
}
# bug 3462 - multiple simultaneous MDC requests
test_73() {
- mkdir $DIR/d73-1
+ mkdir $DIR/d73-1
mkdir $DIR/d73-2
multiop_bg_pause $DIR/d73-1/f73-1 O_c || return 1
pid1=$!
sleep 25
- $CHECKSTAT -t file $DIR/d73-1/f73-1 || return 4
- $CHECKSTAT -t file $DIR/d73-1/f73-2 || return 5
- $CHECKSTAT -t file $DIR/d73-2/f73-3 || return 6
+ $CHECKSTAT -t file $DIR/d73-1/f73-1 || error "$DIR/d73-1/f73-1 not file"
+ $CHECKSTAT -t file $DIR/d73-1/f73-2 || error "$DIR/d73-1/f73-2 not file"
+ $CHECKSTAT -t file $DIR/d73-2/f73-3 || error "$DIR/d73-2/f73-3 not file"
rm -rf $DIR/d73-*
}
test75_prep() {
[ $T75_PREP = "yes" ] && return
echo "using F75=$F75, F128k=$F128k, FHEAD=$FHEAD, FTAIL=$FTAIL"
-
+
dd if=/dev/urandom of=${F75}_128k bs=128k count=1 || error "dd failed"
log "finished dd"
chmod 777 ${F128k}
T75_PREP=yes
}
-
+
test_75a() {
test75_prep
-
+
cp -p ${F128k} ${FHEAD}
log "finished cp to $FHEAD"
cp -p ${F128k} ${FTAIL}
log "finished cp to $FTAIL"
cat ${F128k} ${F128k} > ${F75}_sim_sim
-
+
$JOIN ${FHEAD} ${FTAIL} || error "join ${FHEAD} ${FTAIL} error"
log "finished join $FHEAD to ${F75}_sim_sim"
cmp ${FHEAD} ${F75}_sim_sim || error "${FHEAD} ${F75}_sim_sim differ"
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} still exist after join"
}
run_test 75a "TEST join file ===================================="
-
+
test_75b() {
test75_prep
-
+
cp -p ${F128k} ${FTAIL}
cat ${F75}_sim_sim >> ${F75}_join_sim
cat ${F128k} >> ${F75}_join_sim
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} exist after join"
}
run_test 75b "TEST join file 2 =================================="
-
+
test_75c() {
test75_prep
-
+
cp -p ${F128k} ${FTAIL}
cat ${F128k} >> ${F75}_sim_join
cat ${F75}_join_sim >> ${F75}_sim_join
$CHECKSTAT -a ${FHEAD} || error "tail ${FHEAD} exist after join"
}
run_test 75c "TEST join file 3 =================================="
-
+
test_75d() {
test75_prep
-
+
cp -p ${F128k} ${FHEAD}
cp -p ${F128k} ${FHEAD}_tmp
cat ${F75}_sim_sim >> ${F75}_join_join
$CHECKSTAT -a ${FTAIL} || error "tail ${FTAIL} exist after join (2)"
}
run_test 75d "TEST join file 4 =================================="
-
+
test_75e() {
test75_prep
-
+
rm -rf ${FHEAD} || "delete join file error"
}
run_test 75e "TEST join file 5 (remove joined file) ============="
-
+
test_75f() {
test75_prep
-
+
cp -p ${F128k} ${F75}_join_10_compare
cp -p ${F128k} ${F75}_join_10
for ((i = 0; i < 10; i++)); do
error "files ${F75}_join_10 ${F75}_join_10_compare differ"
}
run_test 75f "TEST join file 6 (join 10 files) =================="
-
+
test_75g() {
[ ! -f ${F75}_join_10 ] && echo "${F75}_join_10 missing" && return
$LFS getstripe ${F75}_join_10
-
+
$OPENUNLINK ${F75}_join_10 ${F75}_join_10 || error "files unlink open"
-
+
ls -l $F75*
}
run_test 75g "TEST join file 7 (open unlink) ===================="
{
[ "$ORIG_CSUM" ] || ORIG_CSUM=`lctl get_param -n osc.*.checksums |
head -n1`
- for f in $LPROC/osc/*/checksums; do
- echo $1 >> $f
- done
+
+ lctl set_param -n osc.*.checksums=$1
return 0
}
run_test 77b "checksum error on client write ===================="
test_77c() { # bug 10889
- [ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
+ [ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
set_checksums 1
for algo in $CKSUM_TYPES; do
cancel_lru_locks osc
run_test 77d "checksum error on OST direct write ==============="
test_77e() { # bug 10889
- [ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
+ [ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
lctl set_param fail_loc=0x80000408
set_checksums 1
run_test 77f "repeat checksum error on write (expect error) ===="
test_77g() { # bug 10889
- [ $(lctl get_param -n devices | grep -c obdfilter) -eq 0 ] && \
- skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
[ ! -f $F77_TMP ] && setup_f77
+
+ $SETSTRIPE $DIR/f77g -c 1 -i 0
#define OBD_FAIL_OST_CHECKSUM_RECEIVE 0x21a
- lctl set_param fail_loc=0x8000021a
+ do_facet ost1 lctl set_param fail_loc=0x8000021a
set_checksums 1
dd if=$F77_TMP of=$DIR/f77g bs=1M count=$F77SZ || \
error "write error: rc=$?"
- lctl set_param fail_loc=0
+ do_facet ost1 lctl set_param fail_loc=0
set_checksums 0
}
run_test 77g "checksum error on OST write ======================"
test_77h() { # bug 10889
- [ $(lctl get_param -n devices | grep -c obdfilter) -eq 0 ] && \
- skip "remote OST" && return
- [ ! -f $DIR/f77g ] && skip "requires 77g - skipping" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+
+ [ ! -f $DIR/f77g ] && skip "requires 77g - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OST_CHECKSUM_SEND 0x21b
- lctl set_param fail_loc=0x8000021b
+ do_facet ost1 lctl set_param fail_loc=0x8000021b
set_checksums 1
cmp $F77_TMP $DIR/f77g || error "file compare failed"
- lctl set_param fail_loc=0
+ do_facet ost1 lctl set_param fail_loc=0
set_checksums 0
}
run_test 77h "checksum error on OST read ======================="
run_test 78 "handle large O_DIRECT writes correctly ============"
test_79() { # bug 12743
- [ $(lctl get_param -n devices | grep -c obdfilter) -eq 0 ] &&
- skip "skipping test for remote OST" && return
-
wait_delete_completed
- BKTOTAL=`lctl get_param -n obdfilter.*.kbytestotal |
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
- BKFREE=`lctl get_param -n obdfilter.*.kbytesfree |
- awk 'BEGIN{free=0}; {free+=$1}; END{print free}'`
- BKAVAIL=`lctl get_param -n obdfilter.*.kbytesavail |
- awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}'`
+ BKTOTAL=$(calc_osc_kbytes kbytestotal)
+ BKFREE=$(calc_osc_kbytes kbytesfree)
+ BKAVAIL=$(calc_osc_kbytes kbytesavail)
STRING=`df -P $MOUNT | tail -n 1 | awk '{print $2","$3","$4}'`
DFTOTAL=`echo $STRING | cut -d, -f1`
DFUSED=`echo $STRING | cut -d, -f2`
ALLOWANCE=$((64 * $OSTCOUNT))
- if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
+ if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
[ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
error "df total($DFTOTAL) mismatch OST total($BKTOTAL)"
fi
- if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
+ if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
[ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
error "df free($DFFREE) mismatch OST free($BKFREE)"
fi
- if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
+ if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
[ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
error "df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
fi
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
sync; sleep 1; sync
BEFORE=`date +%s`
- cancel_lru_locks OSC
+ cancel_lru_locks osc
AFTER=`date +%s`
DIFF=$((AFTER-BEFORE))
if [ $DIFF -gt 1 ] ; then
}
run_test 80 "Page eviction is equally fast at high offsets too ===="
-# on the LLNL clusters, runas will still pick up root's $TMP settings,
-# which will not be writable for the runas user, and then you get a CVS
-# error message with a corrupt path string (CVS bug) and panic.
-# We're not using much space, so just stick it in /tmp, which is safe.
-OLDTMPDIR=$TMPDIR
-OLDTMP=$TMP
-TMPDIR=/tmp
-TMP=/tmp
-OLDHOME=$HOME
-[ $RUNAS_ID -ne $UID ] && HOME=/tmp
-
test_99a() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
mkdir -p $DIR/d99cvsroot || error "mkdir $DIR/d99cvsroot failed"
chown $RUNAS_ID $DIR/d99cvsroot || error "chown $DIR/d99cvsroot failed"
+ local oldPWD=$PWD # bug 13584, use $TMP as working dir
+ cd $TMP
+
$RUNAS cvs -d $DIR/d99cvsroot init || error "cvs init failed"
+ cd $oldPWD
}
run_test 99a "cvs init ========================================="
test_99b() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99a
$RUNAS [ ! -w /tmp ] && skip "/tmp has wrong w permission -- skipping" && return
cd /etc/init.d || error "cd /etc/init.d failed"
run_test 99b "cvs import ======================================="
test_99c() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99b
cd $DIR || error "cd $DIR failed"
mkdir -p $DIR/d99reposname || error "mkdir $DIR/d99reposname failed"
run_test 99c "cvs checkout ====================================="
test_99d() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS touch foo99
run_test 99d "cvs add =========================================="
test_99e() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS cvs update
run_test 99e "cvs update ======================================="
test_99f() {
+ [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99d
cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
run_test 99f "cvs commit ======================================="
test_100() {
- netstat -tna | while read PROT SND RCV LOCAL REMOTE STAT; do
+ [ "$NETTYPE" = tcp ] || \
+ { skip "TCP secure port test, not useful for NETTYPE=$NETTYPE" && \
+ return ; }
+
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ remote_servers || \
+ { skip "useless for local single node setup" && return; }
+
+ netstat -tna | ( rc=1; while read PROT SND RCV LOCAL REMOTE STAT; do
[ "$PROT" != "tcp" ] && continue
- RPORT=`echo $REMOTE | cut -d: -f2`
+ RPORT=$(echo $REMOTE | cut -d: -f2)
[ "$RPORT" != "$ACCEPTOR_PORT" ] && continue
+
+ rc=0
LPORT=`echo $LOCAL | cut -d: -f2`
if [ $LPORT -ge 1024 ]; then
echo "bad: $PROT $SND $RCV $LOCAL $REMOTE $STAT"
error "local: $LPORT > 1024, remote: $RPORT"
fi
done
- true
+ [ "$rc" = 0 ] || error "privileged port not found" )
}
run_test 100 "check local port using privileged port ==========="
$READS -f $DIR/$tfile -s$((cache_limit * 3192 * 1024)) -b65536 -C -n$nreads -t 180
discard=0
- for s in `lctl get_param -n llite.*.read_ahead_stats | get_named_value 'read but discarded'`; do
- discard=$(($discard + $s))
+ for s in `lctl get_param -n llite.*.read_ahead_stats | \
+ get_named_value 'read but discarded' | cut -d" " -f1`; do
+ discard=$(($discard + $s))
done
cleanup_101
if [ $(($discard * 10)) -gt $nreads ] ;then
lctl get_param osc.*.rpc_stats
lctl get_param llite.*.read_ahead_stats
- error "too many ($discard) discarded pages"
+ error "too many ($discard) discarded pages"
fi
rm -f $DIR/$tfile || true
}
run_test 101 "check read-ahead for random reads ================"
-export SETUP_TEST101=no
-setup_test101() {
- [ "$SETUP_TEST101" = "yes" ] && return
+export SETUP_TEST101b=no
+setup_101b() {
+ [ "$SETUP_TEST101b" = "yes" ] && return
mkdir -p $DIR/$tdir
STRIPE_SIZE=1048576
STRIPE_COUNT=$OSTCOUNT
STRIPE_OFFSET=0
- trap cleanup_test101 EXIT
+ trap cleanup_101b EXIT
# prepare the read-ahead file
$SETSTRIPE $DIR/$tfile -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $OSTCOUNT
dd if=/dev/zero of=$DIR/$tfile bs=1024k count=100 2> /dev/null
- SETUP_TEST102=yes
+ SETUP_TEST101b=yes
}
-cleanup_test101() {
- [ "$SETUP_TEST101" = "yes" ] || return
+cleanup_101b() {
trap 0
- rm -rf $DIR/$tdir
- SETUP_TEST102=no
+ rm -rf $DIR/$tdir $DIR/$tfile
+ SETUP_TEST101b=no
}
calc_total() {
awk 'BEGIN{total=0}; {total+=$1}; END{print total}'
}
-ra_check_101() {
+ra_check_101b() {
local READ_SIZE=$1
local STRIPE_SIZE=1048576
local RA_INC=1048576
local STRIDE_LENGTH=$((STRIPE_SIZE/READ_SIZE))
local FILE_LENGTH=$((64*100))
- local discard_limit=$(((((((STRIDE_LENGTH - 1))*3)/(STRIDE_LENGTH*OSTCOUNT))* \
- (STRIDE_LENGTH*OSTCOUNT - STRIDE_LENGTH))))
-
- DISCARD=`$LCTL get_param -n llite.*.read_ahead_stats | \
- get_named_value 'read but discarded' | calc_total`
+ local discard_limit=$((((STRIDE_LENGTH - 1)*3/(STRIDE_LENGTH*OSTCOUNT))* \
+ (STRIDE_LENGTH*OSTCOUNT - STRIDE_LENGTH)))
+ DISCARD=`$LCTL get_param -n llite.*.read_ahead_stats | \
+ get_named_value 'read but discarded' | \
+ cut -d" " -f1 | calc_total`
if [ $DISCARD -gt $discard_limit ]; then
lctl get_param llite.*.read_ahead_stats
- error "Too many ($DISCARD) discarded with size (${READ_SIZE})"
+ error "Too many ($DISCARD) discarded pages (size ${READ_SIZE})"
else
echo "Read-ahead success for size ${READ_SIZE}"
fi
}
test_101b() {
- [ "$OSTCOUNT" -lt "2" ] && skip "skipping stride IO stride-ahead test" && return
+ [ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs for stride-read" && return
local STRIPE_SIZE=1048576
local STRIDE_SIZE=$((STRIPE_SIZE*OSTCOUNT))
local FILE_LENGTH=$((STRIPE_SIZE*100))
local ITERATION=$((FILE_LENGTH/STRIDE_SIZE))
# prepare the read-ahead file
- setup_test101
- cancel_lru_locks osc
- for BIDX in 2 4 8 16 32 64 128 256
- do
+ setup_101b
+ cancel_lru_locks osc
+ for BIDX in 2 4 8 16 32 64 128 256; do
local BSIZE=$((BIDX*4096))
local READ_COUNT=$((STRIPE_SIZE/BSIZE))
local STRIDE_LENGTH=$((STRIDE_SIZE/BSIZE))
local OFFSET=$((STRIPE_SIZE/BSIZE*(OSTCOUNT - 1)))
$LCTL set_param -n llite.*.read_ahead_stats 0
$READS -f $DIR/$tfile -l $STRIDE_LENGTH -o $OFFSET \
- -s $FILE_LENGTH -b $STRIPE_SIZE -a $READ_COUNT -n $ITERATION
+ -s $FILE_LENGTH -b $STRIPE_SIZE -a $READ_COUNT -n $ITERATION
cancel_lru_locks osc
- ra_check_101 $BSIZE
+ ra_check_101b $BSIZE
done
- cleanup_test101
+ cleanup_101b
true
}
run_test 101b "check stride-io mode read-ahead ================="
[ "$SETUP_TEST102" = "yes" ] && return
mkdir -p $DIR/$tdir
STRIPE_SIZE=65536
- STRIPE_COUNT=4
+ STRIPE_COUNT=4
STRIPE_OFFSET=2
trap cleanup_test102 EXIT
cd $DIR
$SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT
- cd $DIR/$tdir
+ cd $DIR/$tdir
for num in 1 2 3 4
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local stripe_size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
done
cd $DIR
- star -c f=$TMP/f102.tar $tdir
+ star -c f=$TMP/f102.tar $tdir
SETUP_TEST102=yes
}
touch $testfile
[ "$UID" != 0 ] && skip "must run as root" && return
- [ -z "`lctl get_param -n mdc.*[mM][dD][cC]*.connect_flags | grep xattr`" ] &&
+ [ -z "`lctl get_param -n mdc.*.connect_flags | grep xattr`" ] &&
skip "must have user_xattr" && return
[ -z "$(which setfattr 2>/dev/null)" ] && skip "could not find setfattr" && return
setfattr -n trusted.name1 -v value1 $testfile || error
[ "`getfattr -n trusted.name1 $testfile 2> /dev/null | \
grep "trusted.name1"`" == "trusted.name1=\"value1\"" ] || error
-
+
setfattr -n user.author1 -v author1 $testfile || error
[ "`getfattr -n user.author1 $testfile 2> /dev/null | \
grep "user.author1"`" == "user.author1=\"author1\"" ] || error
[ `getfattr -d -m "^trusted" $testfile 2> /dev/null | \
grep "trusted.name" | wc -l` -eq 3 ] || error
-
+
setfattr -n user.author2 -v author2 $testfile || error
setfattr -n user.author3 -v author3 $testfile || error
[ `getfattr -d -m "^user" $testfile 2> /dev/null | \
}
run_test 102c "non-root getfattr/setfattr for lustre.lov EAs ==========="
-get_stripe_info() {
- stripe_size=0
- stripe_count=0
- stripe_offset=0
- local lines=`sed -n '/obdidx/=' $1`
- stripe_size=`awk '{if($1~/size/) print $2}' $1`
- stripe_count=`awk '{if($1~/count/) print $2}' $1`
- lines=`expr $lines + 1`
- stripe_offset=`sed -n ${lines}p $1 |awk '{print $1}'`
-}
-
compare_stripe_info1() {
for num in 1 2 3 4
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
- local tmp_file=out
- $GETSTRIPE -v $file > $tmp_file
- get_stripe_info $tmp_file
- if test $stripe_size -ne $size
- then
+ get_stripe_info client $PWD/$file
+ if [ $stripe_size -ne $size ]; then
error "$file: different stripe size" && return
fi
- if test $stripe_count -ne $count
- then
+ if [ $stripe_count -ne $count ]; then
error "$file: different stripe count" && return
fi
- if test $stripe_offset -ne 0
- then
+ if [ $stripe_index -ne 0 ]; then
error "$file: different stripe offset" && return
fi
- rm -f $tmp_file
done
done
done
do
for count in 1 2 3 4
do
- for offset in 0 1 2 3
+ for offset in 0 1 2 3
do
local size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
- local tmp_file=out
- $GETSTRIPE -v $file > $tmp_file
- get_stripe_info $tmp_file
- if test $stripe_size -ne $size
- then
+ get_stripe_info client $PWD/$file
+ if [ $stripe_size -ne $size ]; then
error "$file: different stripe size" && return
fi
- if test $stripe_count -ne $count
- then
+ if [ $stripe_count -ne $count ]; then
error "$file: different stripe count" && return
fi
- if test $stripe_offset -ne $offset
- then
+ if [ $stripe_index -ne $offset ]; then
error "$file: different stripe offset" && return
fi
- rm -f $tmp_file
done
done
done
test_102d() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
if [ $? -ne 0 ]
then
skip "being skipped because a lustre-aware star is not installed." && return
test_102e() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
test_102f() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
test_102g() {
# b10930: star test for trusted.lov xattr
- star --xhelp 2>&1 | grep -q nolustre
+ star --xhelp 2>&1 | grep -q nolustre
[ $? -ne 0 ] && skip "lustre-aware star is not installed" && return
[ "$OSTCOUNT" -lt "4" ] && skip "skipping 4-stripe test" && return
setup_test102
}
run_test 102h "grow xattr from inside inode to external block"
+test_102i() { # bug 17038
+ touch $DIR/$tfile
+ ln -s $DIR/$tfile $DIR/${tfile}link
+ getfattr -n trusted.lov $DIR/$tfile || error "lgetxattr on $DIR/$tfile failed"
+ getfattr -h -n trusted.lov $DIR/${tfile}link 2>&1 | grep -i "no such attr" || error "error for lgetxattr on $DIR/${tfile}link is not ENODATA"
+ rm -f $DIR/$tfile $DIR/${tfile}link
+}
+run_test 102i "lgetxattr test on symbolic link ============"
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
test_103 () {
[ "$UID" != 0 ] && skip "must run as root" && return
- [ -z "$(lctl get_param mdc.*[mM][dD][cC]*.connect_flags | grep acl)" ] && skip "must have acl enabled" && return
+ [ -z "$(lctl get_param mdc.*.connect_flags | grep acl)" ] && skip "must have acl enabled" && return
[ -z "$(which setfacl 2>/dev/null)" ] && skip "could not find setfacl" && return
SAVE_UMASK=`umask`
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -f $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -f $DIR/$tfile || error "fail flock on"
else
- flocks_test off -f $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -f $DIR/$tfile || error "fail flock off"
fi
}
run_test 105a "flock when mounted without -o flock test ========"
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -c $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -c $DIR/$tfile || error "fail flock on"
else
- flocks_test off -c $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -c $DIR/$tfile || error "fail flock off"
fi
}
run_test 105b "fcntl when mounted without -o flock test ========"
touch $DIR/$tfile
if [ -n "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ];
then
- flocks_test on -l $DIR/$tfile || error "fail flock on"
+ flocks_test 1 on -l $DIR/$tfile || error "fail flock on"
else
- flocks_test off -l $DIR/$tfile || error "fail flock off"
+ flocks_test 1 off -l $DIR/$tfile || error "fail flock off"
fi
}
run_test 105c "lockf when mounted without -o flock test ========"
+test_105d() { # bug 15924
+ mkdir -p $DIR/$tdir
+ [ -z "`mount | grep \"$DIR.*flock\" | grep -v noflock`" ] && \
+ skip "mount w/o flock enabled" && return
+ #define OBD_FAIL_LDLM_CP_CB_WAIT 0x315
+ $LCTL set_param fail_loc=0x80000315
+ flocks_test 2 $DIR/$tdir
+}
+run_test 105d "flock race (should not freeze) ========"
+
test_106() { #bug 10921
mkdir -p $DIR/$tdir
$DIR/$tdir && error "exec $DIR/$tdir succeeded"
test_107() {
CDIR=`pwd`
cd $DIR
+
+ local file=core
+ rm -f $file
+
+ local save_pattern=$(sysctl -n kernel.core_pattern)
+ local save_uses_pid=$(sysctl -n kernel.core_uses_pid)
+ sysctl -w kernel.core_pattern=$file
+ sysctl -w kernel.core_uses_pid=0
+
ulimit -c unlimited
sleep 60 &
SLEEPPID=$!
- file=`sysctl -n kernel.core_pattern`
- core_pid=`sysctl -n kernel.core_uses_pid`
- [ $core_pid -eq 1 ] && file=$file.$SLEEPPID
- rm -f $file
sleep 1
kill -s 11 $SLEEPPID
error "Fail to create core file $file"
fi
rm -f $file
+ sysctl -w kernel.core_pattern=$save_pattern
+ sysctl -w kernel.core_uses_pid=$save_uses_pid
cd $CDIR
}
run_test 107 "Coredump on SIG"
# don't return an error
[ $OSTIO_post -eq $OSTIO_pre ] && echo \
- "FAIL: No addition ll_ost_io threads were created ($OSTIO_pre)" &&\
+ "WARNING: No new ll_ost_io threads were created ($OSTIO_pre)" &&\
echo "This may be fine, depending on what ran before this test" &&\
echo "and how fast this system is." && return
MINV=${AVAIL[i]}; MINI=$i
fi
done
- echo Min free space: OST $MINI: $MINV
- echo Max free space: OST $MAXI: $MAXV
+ echo Min free space: OST $MINI: $MINV
+ echo Max free space: OST $MAXI: $MAXV
}
test_116() {
[ "$OSTCOUNT" -lt "2" ] && skip "too few OSTs" && return
- remote_mds && skip "remote MDS" && return
echo -n "Free space priority "
lctl get_param -n lov.*.qos_prio_free
echo "ok"
else
echo "failed - QOS mode won't be used"
- error "QOS imbalance criteria not met"
+ error_ignore "QOS imbalance criteria not met"
return
fi
free_min_max
DIFF2=$(($MAXV - $MINV))
echo "free space delta: orig $DIFF final $DIFF2"
- [ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
+ [ $DIFF2 -gt $DIFF ] && echo "delta got worse!"
DIFF=$(($MINV1 - ${AVAIL[$MINI1]}))
echo "Wrote $DIFF to smaller OST $MINI1"
DIFF2=$(($MAXV1 - ${AVAIL[$MAXI1]}))
echo "Wrote $DIFF2 to larger OST $MAXI1"
[ $DIFF -gt 0 ] && echo "Wrote $(($DIFF2 * 100 / $DIFF - 100))% more data to larger OST $MAXI1"
- # Figure out which files were written where
+ # Figure out which files were written where
UUID=$(lctl get_param -n lov.${FSNAME}-clilov-*.target_obd | awk '/'$MINI1': / {print $2; exit}')
echo $UUID
MINC=$($GETSTRIPE --obd $UUID $DIR/$tdir | wc -l)
MAXC=$($GETSTRIPE --obd $UUID $DIR/$tdir | wc -l)
echo "$MAXC files created on larger OST $MAXI1"
[ $MINC -gt 0 ] && echo "Wrote $(($MAXC * 100 / $MINC - 100))% more files to larger OST $MAXI1"
- [ $MAXC -gt $MINC ] || error "stripe QOS didn't balance free space"
+ [ $MAXC -gt $MINC ] || error_ignore "stripe QOS didn't balance free space"
}
run_test 116 "stripe QOS: free space balance ==================="
FILE=$DIR/reset_async
# Ensure all OSCs are cleared
- $LSTRIPE $FILE 0 -1 -1
+ $SETSTRIPE $FILE 0 -1 -1
dd if=/dev/zero of=$FILE bs=64k count=$OSTCOUNT
sync
rm $FILE
test_118b()
{
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118c()
{
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118d()
{
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
fi
lctl set_param fail_loc=0x0
-
+
LOCKED=$(lctl get_param -n "llite.*.dump_page_cache" | grep -c locked)
DIRTY=$(lctl get_param -n "llite.*.dump_page_cache" | grep -c dirty)
WRITEBACK=$(lctl get_param -n "llite.*.dump_page_cache" | grep -c writeback)
run_test 118g "Don't stay in wait if we got local -ENOMEM =========="
test_118h() {
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
run_test 118h "Verify timeout in handling recoverables errors =========="
test_118i() {
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
run_test 118i "Fix error before timeout in recoverable error =========="
test_118j() {
- remote_ost_nodsh && skip "remote OST" && return
+ remote_ost_nodsh && skip "remote OST with nodsh" && return
reset_async
test_118k()
{
+ remote_ost_nodsh && skip "remote OSTs with nodsh" && return
+
#define OBD_FAIL_OST_BRW_WRITE_BULK 0x20e
set_nodes_failloc "$(osts_nodes)" 0x20e
mkdir -p $DIR/$tdir
stat $DIR/$tdir > /dev/null
can1=`lctl get_param -n ldlm.services.ldlm_canceld.stats | awk '/ldlm_cancel/ {print $2}'`
blk1=`lctl get_param -n ldlm.services.ldlm_cbd.stats | awk '/ldlm_bl_callback/ {print $2}'`
- mkdir -p $DIR/$tdir/d1
+ mkdir $DIR/$tdir/d1
can2=`lctl get_param -n ldlm.services.ldlm_canceld.stats | awk '/ldlm_cancel/ {print $2}'`
blk2=`lctl get_param -n ldlm.services.ldlm_cbd.stats | awk '/ldlm_bl_callback/ {print $2}'`
[ $can1 -eq $can2 ] || error $((can2-can1)) "cancel RPC occured."
cancel_lru_locks mdc
cancel_lru_locks osc
t0=`date +%s`
-
+
can0=`lctl get_param -n ldlm.services.ldlm_canceld.stats | awk '/ldlm_cancel/ {print $2}'`
blk0=`lctl get_param -n ldlm.services.ldlm_cbd.stats | awk '/ldlm_bl_callback/ {print $2}'`
createmany -o $DIR/$tdir/f $count
run_test 122 "fail client bulk callback (shouldn't LBUG) ======="
test_123a() { # was test 123, statahead(bug 11401)
+ SLOWOK=0
if [ -z "$(grep "processor.*: 1" /proc/cpuinfo)" ]; then
log "testing on UP system. Performance may be not as good as expected."
+ SLOWOK=1
fi
- remount_client $MOUNT
+ rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
- error=0
NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
[ $NUMFREE -gt 100000 ] && NUMFREE=100000 || NUMFREE=$((NUMFREE-1000))
MULT=10
- for ((i=1, j=0; i<=$NUMFREE; j=$i, i=$((i * MULT)) )); do
+ for ((i=100, j=0; i<=$NUMFREE; j=$i, i=$((i * MULT)) )); do
createmany -o $DIR/$tdir/$tfile $j $((i - j))
- lctl get_param -n llite.*.statahead_max | grep '[0-9]'
- cancel_lru_locks mdc
- cancel_lru_locks osc
- stime=`date +%s`
- ls -l $DIR/$tdir > /dev/null
- etime=`date +%s`
- delta_sa=$((etime - stime))
- log "ls $i files with statahead: $delta_sa sec"
- lctl get_param -n llite.*.statahead_stats
-
max=`lctl get_param -n llite.*.statahead_max | head -n 1`
lctl set_param -n llite.*.statahead_max 0
lctl get_param llite.*.statahead_max
cancel_lru_locks mdc
cancel_lru_locks osc
stime=`date +%s`
- ls -l $DIR/$tdir > /dev/null
+ time ls -l $DIR/$tdir > /dev/null
etime=`date +%s`
delta=$((etime - stime))
log "ls $i files without statahead: $delta sec"
-
lctl set_param llite.*.statahead_max=$max
- if [ $delta_sa -gt $(($delta + 2)) ]; then
- log "ls $i files is slower with statahead!"
- error=1
+
+ swrong=`lctl get_param -n llite.*.statahead_stats | grep "statahead wrong:" | awk '{print $3}'`
+ lctl get_param -n llite.*.statahead_max | grep '[0-9]'
+ cancel_lru_locks mdc
+ cancel_lru_locks osc
+ stime=`date +%s`
+ time ls -l $DIR/$tdir > /dev/null
+ etime=`date +%s`
+ delta_sa=$((etime - stime))
+ log "ls $i files with statahead: $delta_sa sec"
+ lctl get_param -n llite.*.statahead_stats
+ ewrong=`lctl get_param -n llite.*.statahead_stats | grep "statahead wrong:" | awk '{print $3}'`
+
+ if [ $swrong -lt $ewrong ]; then
+ log "statahead was stopped, maybe too many locks held!"
+ fi
+
+ if [ $((delta_sa * 100)) -gt $((delta * 105)) ]; then
+ if [ $SLOWOK -eq 0 ]; then
+ error "ls $i files is slower with statahead!"
+ else
+ log "ls $i files is slower with statahead!"
+ fi
+ break;
fi
[ $delta -gt 20 ] && break
log "rm -r $DIR/$tdir/: $delta seconds"
log "rm done"
lctl get_param -n llite.*.statahead_stats
- # wait for commitment of removal
- sleep 2
- [ $error -ne 0 ] && error "statahead is slow!"
- return 0
}
run_test 123a "verify statahead work"
test_124a() {
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
- NR=2000
+ local NR=2000
mkdir -p $DIR/$tdir || error "failed to create $DIR/$tdir"
- # use touch to produce $NR new locks
log "create $NR files at $DIR/$tdir"
- createmany -o $DIR/$tdir/f $NR ||
- error "failed to create $NR files in $DIR/$tdir"
-
+ createmany -o $DIR/$tdir/f $NR ||
+ error "failed to create $NR files in $DIR/$tdir"
+
cancel_lru_locks mdc
ls -l $DIR/$tdir > /dev/null
- NSDIR=""
- LRU_SIZE=0
+ local NSDIR=""
+ local LRU_SIZE=0
for VALUE in `lctl get_param ldlm.namespaces.*mdc-*.lru_size`; do
- PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
+ local PARAM=`echo ${VALUE[0]} | cut -d "=" -f1`
LRU_SIZE=$(lctl get_param -n $PARAM)
if [ $LRU_SIZE -gt $(default_lru_size) ]; then
NSDIR=$(echo $PARAM | cut -d "." -f1-3)
- log "using $(basename $NSDIR) namespace"
+ log "NS=$(basename $NSDIR)"
break
fi
done
skip "Not enough cached locks created!"
return 0
fi
- log "created $LRU_SIZE lock(s)"
-
- # we want to sleep 30s to not make test too long
- SLEEP=30
- SLEEP_ADD=2
-
- # we know that lru resize allows one client to hold $LIMIT locks for 10h
- MAX_HRS=10
-
- # get the pool limit
- LIMIT=`lctl get_param -n $NSDIR.pool.limit`
-
- # calculate lock volume factor taking into account data set size and the
- # rule that number of locks will be getting smaller durring sleep interval
- # and we need to additionally enforce LVF to take this into account.
- # Use $LRU_SIZE_B here to take into account real number of locks created
- # in the case of CMD, LRU_SIZE_B != $NR in most of cases
- LVF=$(($MAX_HRS * 60 * 60 * $LIMIT / $SLEEP))
- LRU_SIZE_B=$LRU_SIZE
- log "make client drop locks $LVF times faster so that ${SLEEP}s is enough to cancel $LRU_SIZE lock(s)"
- OLD_LVF=`lctl get_param -n $NSDIR.pool.lock_volume_factor`
+ log "LRU=$LRU_SIZE"
+
+ local SLEEP=30
+
+ # We know that lru resize allows one client to hold $LIMIT locks
+ # for 10h. After that locks begin to be killed by client.
+ local MAX_HRS=10
+ local LIMIT=`lctl get_param -n $NSDIR.pool.limit`
+
+ # Make LVF so higher that sleeping for $SLEEP is enough to _start_
+ # killing locks. Some time was spent for creating locks. This means
+ # that up to the moment of sleep finish we must have killed some of
+ # them (10-100 locks). This depends on how fast ther were created.
+ # Many of them were touched in almost the same moment and thus will
+ # be killed in groups.
+ local LVF=$(($MAX_HRS * 60 * 60 / $SLEEP * $LIMIT / $LRU_SIZE))
+
+ # Use $LRU_SIZE_B here to take into account real number of locks
+ # created in the case of CMD, LRU_SIZE_B != $NR in most of cases
+ local LRU_SIZE_B=$LRU_SIZE
+ log "LVF=$LVF"
+ local OLD_LVF=`lctl get_param -n $NSDIR.pool.lock_volume_factor`
lctl set_param -n $NSDIR.pool.lock_volume_factor $LVF
- log "sleep for $((SLEEP+SLEEP_ADD))s"
- sleep $((SLEEP+SLEEP_ADD))
+
+ # Let's make sure that we really have some margin. Client checks
+ # cached locks every 10 sec.
+ SLEEP=$((SLEEP+20))
+ log "Sleep ${SLEEP} sec"
+ local SEC=0
+ while ((SEC<$SLEEP)); do
+ echo -n "..."
+ sleep 5
+ SEC=$((SEC+5))
+ LRU_SIZE=`lctl get_param -n $NSDIR/lru_size`
+ echo -n "$LRU_SIZE"
+ done
+ echo ""
lctl set_param -n $NSDIR.pool.lock_volume_factor $OLD_LVF
- LRU_SIZE_A=`lctl get_param -n $NSDIR/lru_size`
+ local LRU_SIZE_A=`lctl get_param -n $NSDIR/lru_size`
[ $LRU_SIZE_B -gt $LRU_SIZE_A ] || {
- error "No locks dropped in "$((SLEEP+SLEEP_ADD))"s. LRU size: $LRU_SIZE_A"
+ error "No locks dropped in ${SLEEP}s. LRU size: $LRU_SIZE_A"
unlinkmany $DIR/$tdir/f $NR
return
}
- log "Dropped "$((LRU_SIZE_B-LRU_SIZE_A))" locks in "$((SLEEP+SLEEP_ADD))"s"
+ log "Dropped "$((LRU_SIZE_B-LRU_SIZE_A))" locks in ${SLEEP}s"
log "unlink $NR files at $DIR/$tdir"
unlinkmany $DIR/$tdir/f $NR
}
[ -z "`lctl get_param -n mdc.*.connect_flags | grep lru_resize`" ] && \
skip "no lru resize on server" && return 0
- # even for cmd no matter what metadata namespace to use for getting
+ # even for cmd no matter what metadata namespace to use for getting
# the limit, we use appropriate.
LIMIT=`lctl get_param -n ldlm.namespaces.*mdc*.pool.limit`
NR=$LIMIT
fi
lru_resize_disable mdc
- mkdir -p $DIR/$tdir/disable_lru_resize ||
+ mkdir -p $DIR/$tdir/disable_lru_resize ||
error "failed to create $DIR/$tdir/disable_lru_resize"
createmany -o $DIR/$tdir/disable_lru_resize/f $NR
unlinkmany $DIR/$tdir/disable_lru_resize/f $NR
lru_resize_enable mdc
- mkdir -p $DIR/$tdir/enable_lru_resize ||
+ mkdir -p $DIR/$tdir/enable_lru_resize ||
error "failed to create $DIR/$tdir/enable_lru_resize"
createmany -o $DIR/$tdir/enable_lru_resize/f $NR
run_test 126 "check that the fsgid provided by the client is taken into account"
test_127() { # bug 15521
- $LSTRIPE -i 0 -c 1 $DIR/$tfile
+ $SETSTRIPE -i 0 -c 1 $DIR/$tfile
$LCTL set_param osc.*.stats=0
FSIZE=$((2048 * 1024))
dd if=/dev/zero of=$DIR/$tfile bs=$FSIZE count=1
$LCTL get_param osc.*0000-osc-*.stats | grep samples > $DIR/${tfile}.tmp
while read NAME COUNT SAMP UNIT MIN MAX SUM SUMSQ; do
- eval $NAME=$COUNT
echo "got $COUNT $NAME"
-
+ [ ! $MIN ] && error "Missing min value for $NAME proc entry"
+ eval $NAME=$COUNT || error "Wrong proc format"
+
case $NAME in
- ost_read|ost_write)
+ read_bytes|write_bytes)
[ $MIN -lt 4096 ] && error "min is too small: $MIN"
[ $MIN -gt $FSIZE ] && error "min is too big: $MIN"
[ $MAX -lt 4096 ] && error "max is too small: $MAX"
[ $MAX -gt $FSIZE ] && error "max is too big: $MAX"
[ $SUM -ne $FSIZE ] && error "sum is wrong: $SUM"
- [ $SUMSQ -lt $(((FSIZE /4096) * (4096 * 4096))) ] &&
+ [ $SUMSQ -lt $(((FSIZE /4096) * (4096 * 4096))) ] &&
error "sumsquare is too small: $SUMSQ"
- [ $SUMSQ -gt $((FSIZE * FSIZE)) ] &&
+ [ $SUMSQ -gt $((FSIZE * FSIZE)) ] &&
error "sumsquare is too big: $SUMSQ"
;;
*) ;;
done < $DIR/${tfile}.tmp
#check that we actually got some stats
- [ "$ost_read" ] || error "no read done"
- [ "$ost_write" ] || error "no write done"
+ [ "$read_bytes" ] || error "Missing read_bytes stats"
+ [ "$write_bytes" ] || error "Missing write_bytes stats"
+ [ "$read_bytes" != 0 ] || error "no read done"
+ [ "$write_bytes" != 0 ] || error "no write done"
}
run_test 127 "verify the client stats are sane"
result=$(grep error $TMP/$tfile.log)
rm -f $DIR/$tfile
- [ -z "$result" ] || error "consecutive find's under interactive lfs failed"
+ [ -z "$result" ] || error "consecutive find with interactive lfs failed"
}
-run_test 128 "interactive lfs for 2 consecutive find's"
+run_test 128 "interactive lfs for 2 consecutive finds"
test_129() {
[ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return 0
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
DEV=$(basename $(do_facet mds lctl get_param -n mds.*.mntdev))
- [ -z "$DEV" ] && error "can't access mds mntdev"
+ [ -z "$DEV" ] && error "can't access mds mntdev"
EFBIG=27
LDPROC=/proc/fs/ldiskfs/$DEV/max_dir_size
MAX=16384
return 0
elif [ $rc -ne 0 ]; then
do_facet mds "echo 0 >$LDPROC"
- error_exit "return code $rc received instead of expected $EFBIG"
+ error_exit "error $rc instead of expected $EFBIG"
fi
J=$((J+1))
I=$(stat -c%s "$DIR/$tdir")
}
run_test 129 "test directory size limit ========================"
-TMPDIR=$OLDTMPDIR
-TMP=$OLDTMP
-HOME=$OLDHOME
+OLDIFS="$IFS"
+cleanup_130() {
+ trap 0
+ IFS="$OLDIFS"
+}
+
+test_130a() {
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag has no FIEMAP support" && return
+
+ trap cleanup_130 EXIT RETURN
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 1 $fm_file ||
+ error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=65536 count=1 ||
+ error "dd failed for $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ lun=`$GETSTRIPE $fm_file | grep -A 10 obdidx | awk '{print $1}' | grep -v "obdidx"`
+
+ start_blk=`echo $filefrag_op | cut -d: -f2 | cut -d. -f1`
+ IFS=$'\n'
+ tot_len=0
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $lun )); then
+ cleanup_130
+ error "FIEMAP on 1-stripe file($fm_file) failed"
+ return
+ fi
+ (( tot_len += ext_len ))
+ done
+
+ if (( lun != frag_lun || start_blk != 0 || tot_len != 64 )); then
+ cleanup_130
+ error "FIEMAP on 1-stripe file($fm_file) failed;"
+ return
+ fi
+
+ cleanup_130
+
+ echo "FIEMAP on single striped file succeeded"
+}
+run_test 130a "FIEMAP (1-stripe file)"
+
+test_130b() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "FIEMAP on 2-stripe file test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag has no FIEMAP support" && return
+
+ trap cleanup_130 EXIT RETURN
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file ||
+ error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=1M count=2 ||
+ error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op; do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != 1024 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: len $tot_len for OST $last_lun instead of 256"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != 1024 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: wrong number of LUNs or wrong len for OST $last_lun"
+ return
+ fi
+
+ cleanup_130
+
+ echo "FIEMAP on 2-stripe file succeeded"
+}
+run_test 130b "FIEMAP (2-stripe file)"
+
+test_130c() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "FIEMAP on 2-stripe hole test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag has no FIEMAP support" && return
+
+ trap cleanup_130 EXIT RETURN
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file ||
+ error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file seek=1 bs=1M count=1 ||
+ error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ logical=`echo $line | cut -d: -f2 | cut -d. -f1`
+ if (( logical != 512 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: logical start for LUN $logical instead of 512"
+ return
+ fi
+ if (( tot_len != 512 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: len $tot_len for OST $last_lun instead of 1024"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != 512 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: wrong number of LUNs or wrong len for OST $last_lun"
+ return
+ fi
+
+ cleanup_130
+
+ echo "FIEMAP on 2-stripe file with hole succeeded"
+}
+run_test 130c "FIEMAP (2-stripe file with hole)"
+
+test_130d() {
+ [ "$OSTCOUNT" -lt "3" ] && skip "FIEMAP on N-stripe file test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag has no FIEMAP support" && return
+
+ trap cleanup_130 EXIT RETURN
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c $OSTCOUNT $fm_file ||
+ error "setstripe failed on $fm_file"
+ dd if=/dev/zero of=$fm_file bs=1M count=$OSTCOUNT ||
+ error "dd failed on $fm_file"
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != 1024 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: len $tot_len for OST $last_lun instead of 1024"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != OSTCOUNT || tot_len != 1024 )); then
+ cleanup_130
+ error "FIEMAP $fm_file: wrong number of LUNs or wrong len for OST $last_lun"
+ return
+ fi
+
+ cleanup_130
+
+ echo "FIEMAP on N-stripe file succeeded"
+}
+run_test 130d "FIEMAP (N-stripe file)"
+
+test_130e() {
+ [ "$OSTCOUNT" -lt "2" ] && skip "continuation FIEMAP test" && return
+
+ filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
+ [ -n "$filefrag_op" ] && skip "filefrag has no FIEMAP support" && return
+
+ trap cleanup_130 EXIT RETURN
+
+ local fm_file=$DIR/$tfile
+ lfs setstripe -s 65536 -c 2 $fm_file ||
+ error "setstripe failed on $fm_file"
+ NUM_BLKS=512
+ EXPECTED_LEN=$(( (NUM_BLKS / 2) * 4 ))
+ for ((i = 0; i < $NUM_BLKS; i++)); do
+ dd if=/dev/zero of=$fm_file count=1 bs=4096 seek=$((2*$i)) conv=notrunc > /dev/null 2>&1
+ done
+
+ filefrag -ves $fm_file || error "filefrag $fm_file failed"
+ filefrag_op=`filefrag -ve $fm_file | grep -A 750 "ext:" | grep -v "ext:" | grep -v "found"`
+
+ last_lun=`echo $filefrag_op | cut -d: -f5`
+
+ IFS=$'\n'
+ tot_len=0
+ num_luns=1
+ for line in $filefrag_op
+ do
+ frag_lun=`echo $line | cut -d: -f5`
+ ext_len=`echo $line | cut -d: -f4`
+ if (( $frag_lun != $last_lun )); then
+ if (( tot_len != $EXPECTED_LEN )); then
+ cleanup_130
+ error "FIEMAP $fm_file: len $tot_len for OST $last_lun instead of $EXPECTED_LEN"
+ return
+ else
+ (( num_luns += 1 ))
+ tot_len=0
+ fi
+ fi
+ (( tot_len += ext_len ))
+ last_lun=$frag_lun
+ done
+ if (( num_luns != 2 || tot_len != $EXPECTED_LEN )); then
+ cleanup_130
+ error "FIEMAP $fm_file: wrong number of LUNs or wrong len for OST $last_lun"
+ return
+ fi
+
+ cleanup_130
+
+ echo "FIEMAP with continuation calls succeeded"
+}
+run_test 130e "FIEMAP (test continuation FIEMAP calls)"
+
+test_140() { #bug-17379
+ mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
+ cd $DIR/$tdir || error "Changing to $DIR/$tdir"
+ cp /usr/bin/stat . || error "Copying stat to $DIR/$tdir"
+
+ # VFS limits max symlink depth to 5(4KSTACK) or 8
+ local i=0
+ while i=`expr $i + 1`; do
+ mkdir -p $i || error "Creating dir $i"
+ cd $i || error "Changing to $i"
+ ln -s ../stat stat || error "Creating stat symlink"
+ # Read the symlink until ELOOP present,
+ # not LBUGing the system is considered success,
+ # we didn't overrun the stack.
+ $OPENFILE -f O_RDONLY stat >/dev/null 2>&1; ret=$?
+ [ $ret -ne 0 ] && {
+ if [ $ret -eq 40 ]; then
+ break # -ELOOP
+ else
+ error "Open stat symlink"
+ return
+ fi
+ }
+ done
+ i=`expr $i - 1`
+ echo "The symlink depth = $i"
+ [ $i -eq 4 -o $i -eq 8 ] || error "Invalid symlink depth"
+}
+run_test 140 "Check reasonable stack depth (shouldn't LBUG) ===="
+
+test_150() {
+ local TF="$TMP/$tfile"
+
+ dd if=/dev/urandom of=$TF bs=6096 count=1 || error "dd failed"
+ cp $TF $DIR/$tfile
+ cancel_lru_locks osc
+ cmp $TF $DIR/$tfile || error "$TMP/$tfile $DIR/$tfile differ"
+ remount_client $MOUNT
+ cmp $TF $DIR/$tfile || error "$TF $DIR/$tfile differ (remount)"
+
+ $TRUNCATE $TF 6000
+ $TRUNCATE $DIR/$tfile 6000
+ cancel_lru_locks osc
+ cmp $TF $DIR/$tfile || error "$TF $DIR/$tfile differ (truncate1)"
+
+ echo "12345" >>$TF
+ echo "12345" >>$DIR/$tfile
+ cancel_lru_locks osc
+ cmp $TF $DIR/$tfile || error "$TF $DIR/$tfile differ (append1)"
+
+ echo "12345" >>$TF
+ echo "12345" >>$DIR/$tfile
+ cancel_lru_locks osc
+ cmp $TF $DIR/$tfile || error "$TF $DIR/$tfile differ (append2)"
+
+ rm -f $TF
+ true
+}
+run_test 150 "truncate/append tests"
+
+function roc_access() {
+ ACCNUM=`$LCTL get_param -n obdfilter.*.stats | \
+ grep 'cache_access' | awk '{print $2}' | \
+ awk '{sum=sum+$3} END{print sum}'`
+ echo $ACCNUM
+}
+
+function roc_hit() {
+ ACCNUM=`$LCTL get_param -n obdfilter.*.stats | \
+ grep 'cache_hit' | awk '{print $2}' | \
+ awk '{sum=sum+$1} END{print sum}'`
+ echo $ACCNUM
+}
+
+test_151() {
+ local CPAGES=3
+
+ # check whether obdfilter is cache capable at all
+ if ! $LCTL get_param -n obdfilter.*.read_cache_enable > /dev/null; then
+ echo "not cache-capable obdfilter"
+ return 0
+ fi
+
+ # make sure cache is enabled on all obdfilters
+ $LCTL set_param obdfilter.*.read_cache_enable=1
+ $LCTL set_param obdfilter.*.writethrough_cache_enable=1
+
+ # pages should be in the case right after write
+ dd if=/dev/urandom of=$DIR/$tfile bs=4k count=$CPAGES||error "dd failed"
+ BEFORE=`roc_hit`
+ cancel_lru_locks osc
+ cat $DIR/$tfile >/dev/null
+ AFTER=`roc_hit`
+ if let "AFTER - BEFORE != CPAGES"; then
+ error "NOT IN CACHE: before: $BEFORE, after: $AFTER"
+ fi
+
+ # the following read invalidates the cache
+ cancel_lru_locks osc
+ $LCTL set_param -n obdfilter.*.read_cache_enable 0
+ cat $DIR/$tfile >/dev/null
+
+ # now data shouldn't be found in the cache
+ BEFORE=`roc_hit`
+ cancel_lru_locks osc
+ cat $DIR/$tfile >/dev/null
+ AFTER=`roc_hit`
+ if let "AFTER - BEFORE != 0"; then
+ error "IN CACHE: before: $BEFORE, after: $AFTER"
+ fi
+
+ $LCTL set_param -n obdfilter.*.read_cache_enable=1
+ $LCTL set_param obdfilter.*.writethrough_cache_enable=1
+ rm -f $DIR/$tfile
+}
+run_test 151 "test cache on oss and controls ==============================="
+
+test_152() {
+ local TF="$TMP/$tfile"
+
+ # simulate ENOMEM during write
+#define OBD_FAIL_OST_NOMEM 0x226
+ lctl set_param fail_loc=0x80000226
+ dd if=/dev/urandom of=$TF bs=6096 count=1 || error "dd failed"
+ cp $TF $DIR/$tfile
+ sync || error "sync failed"
+ lctl set_param fail_loc=0
+
+ # discard client's cache
+ cancel_lru_locks osc
+
+ # simulate ENOMEM during read
+ lctl set_param fail_loc=0x80000226
+ cmp $TF $DIR/$tfile || error "cmp failed"
+ lctl set_param fail_loc=0
+
+ rm -f $TF
+}
+run_test 152 "test read/write with enomem ============================"
+
+test_153() {
+ multiop $DIR/$tfile Ow4096Ycu || error "multiop failed"
+}
+run_test 153 "test if fdatasync does not crash ======================="
+
+POOL=${POOL:-cea1}
+TGT_COUNT=$OSTCOUNT
+TGTPOOL_FIRST=1
+TGTPOOL_MAX=$(($TGT_COUNT - 1))
+TGTPOOL_STEP=2
+TGTPOOL_LIST=`seq $TGTPOOL_FIRST $TGTPOOL_STEP $TGTPOOL_MAX`
+POOL_ROOT=${POOL_ROOT:-$DIR/d200.pools}
+POOL_DIR=$POOL_ROOT/dir_tst
+POOL_FILE=$POOL_ROOT/file_tst
+
+check_file_in_pool()
+{
+ file=$1
+ res=$($GETSTRIPE $file | grep 0x | cut -f2)
+ for i in $res
+ do
+ found=$(echo :$TGTPOOL_LIST: | tr " " ":" | grep :$i:)
+ if [[ "$found" == "" ]]
+ then
+ echo "pool list: $TGTPOOL_LIST"
+ echo "striping: $res"
+ error "$file not allocated in $POOL"
+ return 1
+ fi
+ done
+ return 0
+}
+
+test_200a() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ do_facet mgs $LCTL pool_new $FSNAME.$POOL
+ do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL
+ [ $? == 0 ] || error "Pool creation of $POOL failed"
+}
+run_test 200a "Create new pool =========================================="
+
+test_200b() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ TGT=$(seq -f $FSNAME-OST%04g_UUID $TGTPOOL_FIRST $TGTPOOL_STEP \
+ $TGTPOOL_MAX | tr '\n' ' ')
+ do_facet mgs $LCTL pool_add $FSNAME.$POOL \
+ $FSNAME-OST[$TGTPOOL_FIRST-$TGTPOOL_MAX/$TGTPOOL_STEP]_UUID
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL |
+ sort | tr '\n' ' ')
+ [ "$res" = "$TGT" ] || error "Pool ($res) do not match requested ($TGT)"
+}
+run_test 200b "Add targets to a pool ===================================="
+
+test_200c() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ mkdir -p $POOL_DIR
+ $SETSTRIPE -c 2 -p $POOL $POOL_DIR
+ [ $? = 0 ] || error "Cannot set pool $POOL to $POOL_DIR"
+}
+run_test 200c "Set pool on a directory ================================="
+
+test_200d() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ res=$($GETSTRIPE $POOL_DIR | grep pool: | cut -f8 -d " ")
+ [ "$res" = $POOL ] || error "Pool on $POOL_DIR is not $POOL"
+}
+run_test 200d "Check pool on a directory ==============================="
+
+test_200e() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ failed=0
+ for i in $(seq -w 1 $(($TGT_COUNT * 3))); do
+ file=$POOL_DIR/file-$i
+ touch $file
+ check_file_in_pool $file
+ if [[ $? != 0 ]]; then
+ failed=$(($failed + 1))
+ fi
+ done
+ [ "$failed" = 0 ] || error "$failed files not allocated in $POOL"
+}
+run_test 200e "Check files allocation from directory pool =============="
+
+test_200f() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ mkdir -p $POOL_FILE
+ failed=0
+ for i in $(seq -w 1 $(($TGT_COUNT * 3))); do
+ file=$POOL_FILE/spoo-$i
+ $SETSTRIPE -p $POOL $file
+ check_file_in_pool $file
+ if [[ $? != 0 ]]; then
+ failed=$(($failed + 1))
+ fi
+ done
+ [ "$failed" = 0 ] || error "$failed files not allocated in $POOL"
+}
+run_test 200f "Create files in a pool ==================================="
+
+test_200g() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ TGT=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL |
+ head -1)
+ do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL |
+ grep $TGT)
+ [ "$res" = "" ] || error "$TGT not removed from $FSNAME.$POOL"
+}
+run_test 200g "Remove a target from a pool ============================="
+
+test_200h() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ for TGT in $(do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL); do
+ do_facet mgs $LCTL pool_remove $FSNAME.$POOL $TGT
+ done
+ res=$(do_facet mgs $LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL)
+ [ "$res" = "" ] || error "Pool $FSNAME.$POOL cannot be drained"
+}
+run_test 200h "Remove all targets from a pool =========================="
+
+test_200i() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep pools)" ] &&
+ skip "missing pools support on server" && return
+ remote_mds_nodsh && skip "remote MDS with nodsh" && return
+ do_facet mgs $LCTL pool_destroy $FSNAME.$POOL
+ res=$(do_facet mgs "$LCTL get_param -n lov.$FSNAME-mdtlov.pools.$POOL 2>/dev/null")
+ [ "$res" = "" ] || error "Pool $FSNAME.$POOL is not destroyed"
+}
+run_test 200i "Remove a pool ============================================"
+
+#
+# tests that do cleanup/setup should be run at the end
+#
+
+test_900() {
+ local ls
+ #define OBD_FAIL_MGC_PAUSE_PROCESS_LOG 0x903
+ $LCTL set_param fail_loc=0x903
+ # cancel_lru_locks mgc - does not work due to lctl set_param syntax
+ for ls in /proc/fs/lustre/ldlm/namespaces/MGC*/lru_size; do
+ echo "clear" > $ls
+ done
+ FAIL_ON_ERROR=true cleanup
+ FAIL_ON_ERROR=true setup
+}
+run_test 900 "umount should not race with any mgc requeue thread"
log "cleanup: ======================================================"
check_and_cleanup_lustre
git://git.whamcloud.com / fs / lustre-release.git / blobdiff