set -e
ONLY=${ONLY:-"$*"}
-ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"35 32q 37 39"} # bugs 1360, 1504
+# bug number for skipped test: 2108
+RENAME_TESTS="24a 24b 24c 24d 24e 24f 24g 24h 24i 24j 24k 24l 24m 24n 24o 48a 48d"
+ALWAYS_EXCEPT=${ALWAYS_EXCEPT:-"$RENAME_TESTS 58"}
+# UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
+case `uname -r` in
+2.6.*) ALWAYS_EXCEPT="$ALWAYS_EXCEPT 54c 55" # bug 3117
+esac
+
+[ "$ALWAYS_EXCEPT$EXCEPT" ] && echo "Skipping tests: $ALWAYS_EXCEPT $EXCEPT"
SRCDIR=`dirname $0`
-PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
+export PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
+
+TMP=${TMP:-/tmp}
+FSTYPE=${FSTYPE:-ext3}
CHECKSTAT=${CHECKSTAT:-"checkstat -v"}
CREATETEST=${CREATETEST:-createtest}
-LFIND=${LFIND:-lfind}
-LSTRIPE=${LSTRIPE:-lstripe}
+LFS=${LFS:-lfs}
+LSTRIPE=${LSTRIPE:-"$LFS setstripe"}
+LFIND=${LFIND:-"$LFS find"}
+LVERIFY=${LVERIFY:-ll_dirstripe_verify}
LCTL=${LCTL:-lctl}
MCREATE=${MCREATE:-mcreate}
OPENFILE=${OPENFILE:-openfile}
OPENUNLINK=${OPENUNLINK:-openunlink}
TOEXCL=${TOEXCL:-toexcl}
TRUNCATE=${TRUNCATE:-truncate}
+MUNLINK=${MUNLINK:-munlink}
+SOCKETSERVER=${SOCKETSERVER:-socketserver}
+SOCKETCLIENT=${SOCKETCLIENT:-socketclient}
+IOPENTEST1=${IOPENTEST1:-iopentest1}
+IOPENTEST2=${IOPENTEST2:-iopentest2}
if [ $UID -ne 0 ]; then
RUNAS_ID="$UID"
clean() {
echo -n "cln.."
sh llmountcleanup.sh > /dev/null || exit 20
+ I_MOUNTED=no
}
CLEAN=${CLEAN:-clean}
start() {
echo -n "mnt.."
sh llrmount.sh > /dev/null || exit 10
+ I_MOUNTED=yes
echo "done"
}
START=${START:-start}
log() {
echo "$*"
- lctl mark "$*" || true
+ lctl mark "$*" 2> /dev/null || true
+}
+
+trace() {
+ log "STARTING: $*"
+ strace -o $TMP/$1.strace -ttt $*
+ RC=$?
+ log "FINISHED: $*: rc $RC"
+ return 1
+}
+TRACE=${TRACE:-""}
+
+check_kernel_version() {
+ VERSION_FILE=/proc/fs/lustre/kernel_version
+ WANT_VER=$1
+ [ ! -f $VERSION_FILE ] && echo "can't find kernel version" && return 1
+ GOT_VER=`cat $VERSION_FILE`
+ [ $GOT_VER -ge $WANT_VER ] && return 0
+ log "test needs at least kernel version $WANT_VER, running $GOT_VER"
+ return 1
}
run_one() {
if ! mount | grep -q $DIR; then
$START
fi
+ echo -1 >/proc/sys/portals/debug
log "== test $1: $2"
- test_$1 || error
+ export TESTNAME=test_$1
+ test_$1 || error "test_$1: exit with rc=$?"
+ unset TESTNAME
pass
cd $SAVE_PWD
$CLEAN
}
-run_test() {
- for O in $ONLY; do
- if [ "`echo $1 | grep '\<'$O'[a-z]*\>'`" ]; then
- echo ""
- run_one $1 "$2"
- return $?
- else
- echo -n "."
- fi
- done
- for X in $EXCEPT $ALWAYS_EXCEPT; do
- if [ "`echo $1 | grep '\<'$X'[a-z]*\>'`" ]; then
- echo "skipping excluded test $1"
- return 0
- fi
- done
- if [ -z "$ONLY" ]; then
- run_one $1 "$2"
- return $?
- fi
+build_test_filter() {
+ for O in $ONLY; do
+ eval ONLY_${O}=true
+ done
+ for E in $EXCEPT $ALWAYS_EXCEPT; do
+ eval EXCEPT_${E}=true
+ done
+}
+
+_basetest() {
+ echo $*
+}
+
+basetest() {
+ IFS=abcdefghijklmnopqrstuvwxyz _basetest $1
}
+run_test() {
+ base=`basetest $1`
+ if [ "$ONLY" ]; then
+ testname=ONLY_$1
+ if [ ${!testname}x != x ]; then
+ run_one $1 "$2"
+ return $?
+ fi
+ testname=ONLY_$base
+ if [ ${!testname}x != x ]; then
+ run_one $1 "$2"
+ return $?
+ fi
+ echo -n "."
+ return 0
+ fi
+ testname=EXCEPT_$1
+ if [ ${!testname}x != x ]; then
+ echo "skipping excluded test $1"
+ return 0
+ fi
+ testname=EXCEPT_$base
+ if [ ${!testname}x != x ]; then
+ echo "skipping excluded test $1 (base $base)"
+ return 0
+ fi
+ run_one $1 "$2"
+ return $?
+}
+
+[ "$SANITYLOG" ] && rm -f $SANITYLOG || true
+
error() {
- echo "FAIL: $@"
- exit 1
+ log "FAIL: $@"
+ if [ "$SANITYLOG" ]; then
+ echo "FAIL: $TESTNAME $@" >> $SANITYLOG
+ else
+ exit 1
+ fi
}
pass() {
DIR=${DIR:-$MOUNT}
[ -z "`echo $DIR | grep $MOUNT`" ] && echo "$DIR not in $MOUNT" && exit 99
+LOVNAME=`cat /proc/fs/lustre/llite/fs0/lov/common_name`
+OSTCOUNT=`cat /proc/fs/lustre/lov/$LOVNAME/numobd`
+STRIPECOUNT=`cat /proc/fs/lustre/lov/$LOVNAME/stripecount`
+STRIPESIZE=`cat /proc/fs/lustre/lov/$LOVNAME/stripesize`
+
+[ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
+[ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
rm -rf $DIR/[Rdfs][1-9]*
+build_test_filter
+
echo preparing for tests involving mounts
EXT2_DEV=${EXT2_DEV:-/tmp/SANITY.LOOP}
touch $EXT2_DEV
-mke2fs -F $EXT2_DEV 1000 > /dev/null
+mke2fs -j -F $EXT2_DEV 8000 > /dev/null
test_0() {
touch $DIR/f
- $CHECKSTAT -t file $DIR/f || error
+ $CHECKSTAT -t file $DIR/f || error
rm $DIR/f
$CHECKSTAT -a $DIR/f || error
}
rm -r $DIR/d2
$CHECKSTAT -a $DIR/d2 || error
}
-run_test 2b "rm -r .../d2; touch .../d2/f ======================"
+run_test 2b "rm -r .../d2; checkstat .../d2/f ======================"
test_3a() {
mkdir $DIR/d3
run_test 3a "mkdir .../d3 ======================================"
test_3b() {
+ if [ ! -d $DIR/d3 ]; then
+ mkdir $DIR/d3
+ fi
touch $DIR/d3/f
$CHECKSTAT -t file $DIR/d3/f || error
}
run_test 4a "mkdir .../d4 ======================================"
test_4b() {
+ if [ ! -d $DIR/d4 ]; then
+ mkdir $DIR/d4
+ fi
mkdir $DIR/d4/d2
$CHECKSTAT -t dir $DIR/d4/d2 || error
}
test_6b() {
[ $RUNAS_ID -eq $UID ] && echo "skipping test 6b" && return
+ if [ ! -f $DIR/f6a ]; then
+ touch $DIR/f6a
+ chmod 0666 $DIR/f6a
+ fi
$RUNAS chmod 0444 $DIR/f6a && error
$CHECKSTAT -t file -p 0666 -u \#$UID $DIR/f6a || error
}
test_6d() {
[ $RUNAS_ID -eq $UID ] && echo "skipping test 6d" && return
+ if [ ! -f $DIR/f6c ]; then
+ touch $DIR/f6c
+ chown $RUNAS_ID $DIR/f6c
+ fi
$RUNAS chown $UID $DIR/f6c && error
$CHECKSTAT -t file -u \#$RUNAS_ID $DIR/f6c || error
}
test_6f() {
[ $RUNAS_ID -eq $UID ] && echo "skipping test 6f" && return
+ if [ ! -f $DIR/f6e ]; then
+ touch $DIR/f6e
+ chgrp $RUNAS_ID $DIR/f6e
+ fi
$RUNAS chgrp $UID $DIR/f6e && error
$CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/f6e || error
}
run_test 6f "$RUNAS chgrp .../f6e (should return error) =="
+test_6g() {
+ [ $RUNAS_ID -eq $UID ] && echo "skipping test 6g" && return
+ mkdir $DIR/d6g || error
+ chmod 777 $DIR/d6g || error
+ $RUNAS mkdir $DIR/d6g/d || error
+ chmod g+s $DIR/d6g/d || error
+ mkdir $DIR/d6g/d/subdir
+ $CHECKSTAT -g \#$RUNAS_ID $DIR/d6g/d/subdir || error
+}
+run_test 6g "Is new dir in sgid dir inheriting group?"
+
test_7a() {
mkdir $DIR/d7
$MCREATE $DIR/d7/f
run_test 7a "mkdir .../d7; mcreate .../d7/f; chmod .../d7/f ===="
test_7b() {
+ if [ ! -d $DIR/d7 ]; then
+ mkdir $DIR/d7
+ fi
$MCREATE $DIR/d7/f2
echo -n foo > $DIR/d7/f2
[ "`cat $DIR/d7/f2`" = "foo" ] || error
run_test 17a "symlinks: create, remove (real) =================="
test_17b() {
+ if [ ! -d $DIR/d17 ]; then
+ mkdir $DIR/d17
+ fi
ln -s no-such-file $DIR/d17/l-dangle
ls -l $DIR/d17
$CHECKSTAT -l no-such-file $DIR/d17/l-dangle || error
}
run_test 18 "touch .../f ; ls ... =============================="
-test_19() {
- touch $DIR/f
+test_19a() {
+ touch $DIR/f19
ls -l $DIR
- rm $DIR/f
- $CHECKSTAT -a $DIR/f || error
+ rm $DIR/f19
+ $CHECKSTAT -a $DIR/f19 || error
+}
+run_test 19a "touch .../f19 ; ls -l ... ; rm .../f19 ==========="
+
+test_19b() {
+ ls -l $DIR/f19 && error || true
+}
+run_test 19b "ls -l .../f19 (should return error) =============="
+
+test_19c() {
+ [ $RUNAS_ID -eq $UID ] && echo "skipping test 19c" && return
+ $RUNAS touch $DIR/f19 && error || true
+}
+run_test 19c "$RUNAS touch .../f19 (should return error) =="
+
+test_19d() {
+ cat $DIR/f19 && error || true
}
-run_test 19 "touch .../f ; ls -l ... ==========================="
+run_test 19d "cat .../f19 (should return error) =============="
test_20() {
touch $DIR/f
}
run_test 24j "source does not exist ============================"
+test_24k() {
+ mkdir $DIR/R11a $DIR/R11a/d
+ touch $DIR/R11a/f
+ mv $DIR/R11a/f $DIR/R11a/d
+ $CHECKSTAT -a $DIR/R11a/f || error
+ $CHECKSTAT -t file $DIR/R11a/d/f || error
+}
+run_test 24k "touch .../R11a/f; mv .../R11a/f .../R11a/d ======="
+
+# bug 2429 - rename foo foo foo creates invalid file
+test_24l() {
+ f="$DIR/f24l"
+ multiop $f OcNs || error
+}
+run_test 24l "Renaming a file to itself ========================"
+
+test_24m() {
+ f="$DIR/f24m"
+ multiop $f OcLN ${f}2 ${f}2 || error
+}
+run_test 24m "Renaming a file to a hard link to itself ========="
+
+test_24n() {
+ f="$DIR/f24n"
+ # this stats the old file after it was renamed, so it should fail
+ touch ${f}
+ $CHECKSTAT ${f}
+ mv ${f} ${f}.rename
+ $CHECKSTAT ${f}.rename
+ $CHECKSTAT -a ${f}
+}
+run_test 24n "Statting the old file after renameing (Posix rename 2)"
+
+test_24o() {
+ check_kernel_version 37 || return 0
+ rename_many -s 3287 -v -n 10 $DIR
+}
+run_test 24o "rename of files during htree split ==============="
+
test_25a() {
echo '== symlink sanity ============================================='
mkdir $DIR/d25
run_test 25a "create file in symlinked directory ==============="
test_25b() {
+ [ ! -d $DIR/d25 ] && test_25a
$CHECKSTAT -t file $DIR/s25/foo || error
}
run_test 25b "lookup file in symlinked directory ==============="
run_test 26d "create multiple component recursive symlink ======"
test_26e() {
+ [ ! -h $DIR/d26-3 ] && test_26d
rm $DIR/d26-3
}
run_test 26e "unlink multiple component recursive symlink ======"
test_27a() {
echo '== stripe sanity =============================================='
mkdir $DIR/d27
- $LSTRIPE $DIR/d27/f0 8192 0 1
- $CHECKSTAT -t file $DIR/d27/f0
+ $LSTRIPE $DIR/d27/f0 65536 0 1 || error
+ $CHECKSTAT -t file $DIR/d27/f0 || error
pass
log "== test_27b: write to one stripe file ========================="
- cp /etc/hosts $DIR/d27/f0
+ cp /etc/hosts $DIR/d27/f0 || error
}
run_test 27a "one stripe file =================================="
test_27c() {
- $LSTRIPE $DIR/d27/f01 8192 0 2
+ [ "$OSTCOUNT" -lt "2" ] && echo "skipping 2-stripe test" && return
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
+ $LSTRIPE $DIR/d27/f01 65536 0 2 || error
+ [ `$LFIND $DIR/d27/f01 | grep -A 10 obdidx | wc -l` -eq 4 ] ||
+ error "two-stripe file doesn't have two stripes"
pass
log "== test_27d: write to two stripe file file f01 ================"
- dd if=/dev/zero of=$DIR/d27/f01 bs=4k count=4
+ dd if=/dev/zero of=$DIR/d27/f01 bs=4k count=4 || error
}
run_test 27c "create two stripe file f01 ======================="
test_27d() {
- $LSTRIPE $DIR/d27/fdef 0 -1 0
- $CHECKSTAT -t file $DIR/d27/fdef
- #dd if=/dev/zero of=$DIR/d27/fdef bs=4k count=4
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
+ $LSTRIPE $DIR/d27/fdef 0 -1 0 || error
+ $CHECKSTAT -t file $DIR/d27/fdef || error
+ #dd if=/dev/zero of=$DIR/d27/fdef bs=4k count=4 || error
}
run_test 27d "create file with default settings ================"
test_27e() {
- $LSTRIPE $DIR/d27/f12 8192 1 2
- $LSTRIPE $DIR/d27/f12 8192 1 2 && error
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
+ $LSTRIPE $DIR/d27/f12 65536 0 2 || error
+ $LSTRIPE $DIR/d27/f12 65536 0 2 && error
$CHECKSTAT -t file $DIR/d27/f12 || error
- #dd if=/dev/zero of=$DIR/d27/f12 bs=4k count=4
}
run_test 27e "lstripe existing file (should return error) ======"
-
test_27f() {
- $LSTRIPE $DIR/d27/fbad 100 1 2 || true
- dd if=/dev/zero of=$DIR/d27/f12 bs=4k count=4
- $LFIND $DIR/d27/fbad
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
+ $LSTRIPE $DIR/d27/fbad 100 0 1 && error
+ dd if=/dev/zero of=$DIR/d27/f12 bs=4k count=4 || error
+ $LFIND $DIR/d27/fbad || error
}
-run_test 27f "lstripe with bad stripe size (should return error on LOV)"
+run_test 27f "lstripe with bad stripe size (should return error)"
test_27g() {
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
$MCREATE $DIR/d27/fnone || error
pass
- log "== test 27h: lfind ============================================"
- $LFIND $DIR/d27/fnone | grep -q "Has no stripe info" || error
+ log "== test 27h: lfind with no objects ============================"
+ $LFIND $DIR/d27/fnone 2>&1 | grep "no stripe info" || error
+ pass
+ log "== test 27i: lfind with some objects =========================="
+ touch $DIR/d27/fsome || error
+ $LFIND $DIR/d27/fsome | grep obdidx || error
+}
+run_test 27g "test lfind ======================================="
+
+test_27j() {
+ if [ ! -d $DIR/d27 ]; then
+ mkdir $DIR/d27
+ fi
+ $LSTRIPE $DIR/d27/f27j 65536 $OSTCOUNT 1 && error || true
+}
+run_test 27j "lstripe with bad stripe offset (should return error)"
+
+test_27k() { # bug 2844
+ FILE=$DIR/d27/f27k
+ LL_MAX_BLKSIZE=$((4 * 1024 * 1024))
+ [ ! -d $DIR/d27 ] && mkdir -p $DIR/d27
+ $LSTRIPE $FILE 67108864 -1 0 || error "lstripe failed"
+ BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
+ [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "$BLKSIZE > $LL_MAX_BLKSIZE"
+ dd if=/dev/zero of=$FILE bs=4k count=1
+ BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
+ [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "$BLKSIZE > $LL_MAX_BLKSIZE"
+}
+run_test 27k "limit i_blksize for broken user apps ============="
+
+test_27l() {
+ mcreate $DIR/f27l || error "creating file"
+ $RUNAS $LSTRIPE $DIR/f27l 65536 -1 1 && \
+ error "lstripe should have failed" || true
}
-run_test 27g "mcreate file without objects to test lfind ======="
+run_test 27l "check setstripe permissions (should return error)"
test_28() {
mkdir $DIR/d28
}
run_test 28 "create/mknod/mkdir with bad file types ============"
+cancel_lru_locks() {
+ for d in /proc/fs/lustre/ldlm/namespaces/$1*; do
+ echo clear > $d/lru_size
+ done
+ grep [0-9] /proc/fs/lustre/ldlm/namespaces/$1*/lock_unused_count /dev/null
+}
+
test_29() {
+ cancel_lru_locks MDC
mkdir $DIR/d29
touch $DIR/d29/foo
log 'first d29'
ls -l $DIR/d29
- MDCDIR=${MDCDIR:-/proc/fs/lustre/ldlm/ldlm/MDC_*}
+ MDCDIR=${MDCDIR:-/proc/fs/lustre/ldlm/namespaces/MDC_*}
LOCKCOUNTORIG=`cat $MDCDIR/lock_count`
LOCKUNUSEDCOUNTORIG=`cat $MDCDIR/lock_unused_count`
log 'second d29'
}
run_test 30 "run binary from Lustre (execve) ==================="
-test_31() {
+test_31a() {
$OPENUNLINK $DIR/f31 $DIR/f31 || error
+ $CHECKSTAT -a $DIR/f31 || error
+}
+run_test 31a "open-unlink file =================================="
+
+test_31b() {
+ touch $DIR/f31 || error
+ ln $DIR/f31 $DIR/f31b || error
+ multiop $DIR/f31b Ouc || error
+ $CHECKSTAT -t file $DIR/f31 || error
+}
+run_test 31b "unlink file with multiple links while open ======="
+
+test_31c() {
+ touch $DIR/f31 || error
+ ln $DIR/f31 $DIR/f31c || error
+ multiop $DIR/f31 O_uc &
+ MULTIPID=$!
+ multiop $DIR/f31c Ouc
+ usleep 500
+ kill -USR1 $MULTIPID
+ wait $MUTLIPID
+}
+run_test 31c "open-unlink file with multiple links ============="
+
+test_31d() {
+ opendirunlink $DIR/d31d $DIR/d31d || error
+ $CHECKSTAT -a $DIR/d31d || error
+}
+run_test 31d "remove of open directory ========================="
+
+test_31e() {
+ check_kernel_version 34 || return 0
+ openfilleddirunlink $DIR/d31e || error
}
-run_test 31 "open-unlink file =================================="
+run_test 31e "remove of open non-empty directory ==============="
test_32a() {
echo "== more mountpoints and symlinks ================="
run_test 32o "stat d32o/symlink->tmp/symlink->lustre-root/test_file"
test_32p() {
+ log 32p_1
rm -fr $DIR/d32p
+ log 32p_2
rm -f $DIR/test_file
+ log 32p_3
touch $DIR/test_file
+ log 32p_4
mkdir -p $DIR/d32p/tmp
+ log 32p_5
TMP_DIR=$DIR/d32p/tmp
+ log 32p_6
ln -s $DIR/test_file $TMP_DIR/symlink12
+ log 32p_7
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
+ log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
- cat $DIR/d32p/symlink02 || error
+ log 32p_9
+ cat $DIR/d32p/symlink02 || error
+ log 32p_10
}
run_test 32p "open d32p/symlink->tmp/symlink->lustre-root/test_file"
test_32q() {
[ -e $DIR/d32q ] && rm -fr $DIR/d32q
mkdir -p $DIR/d32q
+ touch $DIR/d32q/under_the_mount
mount -t ext2 -o loop $EXT2_DEV $DIR/d32q
- ls $DIR/d32q || error
+ ls $DIR/d32q/under_the_mount && error || true
umount $DIR/d32q || error
}
-run_test 32q "ls a mounted file system ========================="
+run_test 32q "stat follows mountpoints in Lustre (should return error)"
+
+test_32r() {
+ [ -e $DIR/d32r ] && rm -fr $DIR/d32r
+ mkdir -p $DIR/d32r
+ touch $DIR/d32r/under_the_mount
+ mount -t ext2 -o loop $EXT2_DEV $DIR/d32r
+ ls $DIR/d32r | grep -q under_the_mount && error || true
+ umount $DIR/d32r || error
+}
+run_test 32r "opendir follows mountpoints in Lustre (should return error)"
# chmod 444 /mnt/lustre/somefile
# open(/mnt/lustre/somefile, O_RDWR)
touch $DIR/test_33_file
chmod 444 $DIR/test_33_file
chown $RUNAS_ID $DIR/test_33_file
- $RUNAS $OPENFILE -f O_RDWR $DIR/test_33_file && error || true
+ log 33_1
+ $RUNAS $OPENFILE -f O_RDWR $DIR/test_33_file && error || true
+ log 33_2
}
run_test 33 "write file with mode 444 (should return error) ===="
+
+test_33a() {
+ rm -fr $DIR/d33
+ mkdir -p $DIR/d33
+ chown $RUNAS_ID $DIR/d33
+ $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33 || error
+ $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33 && error || true
+}
+run_test 33a "test open file(mode=0444) with O_RDWR (should return error)"
TEST_34_SIZE=${TEST_34_SIZE:-2000000000000}
test_34a() {
- rm -f $DIR/test_34_file
- $MCREATE $DIR/test_34_file || error
- $LFIND $DIR/test_34_file | grep -q "Has no stripe information" || error
- $TRUNCATE $DIR/test_34_file $TEST_34_SIZE || error
- $LFIND $DIR/test_34_file | grep -q "Has no stripe information" || error
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
+ rm -f $DIR/f34
+ $MCREATE $DIR/f34 || error
+ $LFIND $DIR/f34 2>&1 | grep -q "no stripe info" || error
+ $TRUNCATE $DIR/f34 $TEST_34_SIZE || error
+ $LFIND $DIR/f34 2>&1 | grep -q "no stripe info" || error
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34a "truncate file that has not been opened ==========="
test_34b() {
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
- $OPENFILE -f O_RDONLY $DIR/test_34_file
- $LFIND $DIR/test_34_file | grep -q "Has no stripe information" || error
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
+ [ ! -f $DIR/f34 ] && test_34a
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
+ $OPENFILE -f O_RDONLY $DIR/f34
+ $LFIND $DIR/f34 2>&1 | grep -q "no stripe info" || error
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34b "O_RDONLY opening file doesn't create objects ====="
test_34c() {
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
- $OPENFILE -f O_RDWR $DIR/test_34_file
- $LFIND $DIR/test_34_file | grep -q "Has no stripe information" && error
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
+ [ ! -f $DIR/f34 ] && test_34a
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
+ $OPENFILE -f O_RDWR $DIR/f34
+ $LFIND $DIR/f34 2>&1 | grep -q "no stripe info" && error
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34c "O_RDWR opening file-with-size works =============="
test_34d() {
- dd if=/dev/zero of=$DIR/test_34_file conv=notrunc bs=4k count=1 || error
- $CHECKSTAT -s $TEST_34_SIZE $DIR/test_34_file || error
- rm $DIR/test_34_file
+ [ ! -f $DIR/f34 ] && test_34a
+ dd if=/dev/zero of=$DIR/f34 conv=notrunc bs=4k count=1 || error
+ $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
+ rm $DIR/f34
}
run_test 34d "write to sparse file ============================="
test_34e() {
- rm -f $DIR/test_34_file
- $MCREATE $DIR/test_34_file || error
- $TRUNCATE $DIR/test_34_file 1000 || error
- $CHECKSTAT -s 1000 $DIR/test_34_file || error
- $OPENFILE -f O_RDWR $DIR/test_34_file
- $CHECKSTAT -s 1000 $DIR/test_34_file || error
+ rm -f $DIR/f34e
+ $MCREATE $DIR/f34e || error
+ $TRUNCATE $DIR/f34e 1000 || error
+ $CHECKSTAT -s 1000 $DIR/f34e || error
+ $OPENFILE -f O_RDWR $DIR/f34e
+ $CHECKSTAT -s 1000 $DIR/f34e || error
}
run_test 34e "create objects, some with size and some without =="
-test_35() {
- cp /bin/sh $DIR/test_35_file
- chmod 444 $DIR/test_35_file
- chown $RUNAS_ID $DIR/test_35_file
- $DIR/test_35_file && error || true
- rm $DIR/test_35_file
+test_35a() {
+ cp /bin/sh $DIR/f35a
+ chmod 444 $DIR/f35a
+ chown $RUNAS_ID $DIR/f35a
+ $RUNAS $DIR/f35a && error || true
+ rm $DIR/f35a
}
-run_test 35 "exec file with mode 444 (should return error) ====="
+run_test 35a "exec file with mode 444 (should return and not leak) ====="
test_36a() {
- sleep 1 # we need a rest, or UMLs clock becomes skewed
- rm -f $DIR/test_36_file
- utime $DIR/test_36_file || error
+ rm -f $DIR/f36
+ utime $DIR/f36 || error
}
run_test 36a "MDS utime check (mknod, utime) ==================="
test_36b() {
- sleep 1
- echo "" > $DIR/test_36_file
- utime $DIR/test_36_file || error
+ echo "" > $DIR/f36
+ utime $DIR/f36 || error
}
run_test 36b "OST utime check (open, utime) ===================="
test_36c() {
- sleep 1
- rm -f $DIR/d36/test_36_file
+ rm -f $DIR/d36/f36
mkdir $DIR/d36
chown $RUNAS_ID $DIR/d36
- $RUNAS utime $DIR/d36/test_36_file || error
+ $RUNAS utime $DIR/d36/f36 || error
}
run_test 36c "non-root MDS utime check (mknod, utime) =========="
test_36d() {
- sleep 1
- echo "" > $DIR/d36/test_36_file
- $RUNAS utime $DIR/d36/test_36_file || error
+ [ ! -d $DIR/d36 ] && test_36c
+ echo "" > $DIR/d36/f36
+ $RUNAS utime $DIR/d36/f36 || error
}
run_test 36d "non-root OST utime check (open, utime) ==========="
test_36e() {
- sleep 1
- [ $RUNAS_ID -eq $UID ] && return
- touch $DIR/d36/test_36_file2
- $RUNAS utime $DIR/d36/test_36_file2 && error || true
+ [ $RUNAS_ID -eq $UID ] && echo "skipping test 36e" && return
+ [ ! -d $DIR/d36 ] && mkdir $DIR/d36
+ touch $DIR/d36/f36e
+ $RUNAS utime $DIR/d36/f36e && error "utime worked, want failure" || true
}
run_test 36e "utime on non-owned file (should return error) ===="
}
run_test 37 "ls a mounted file system to check old content ====="
-# open(file, O_DIRECTORY) will leak a request and not cleanup (bug 1501)
test_38() {
o_directory $DIR/test38
}
}
run_test 41 "test small file write + fstat ====================="
+count_ost_writes() {
+ cat /proc/fs/lustre/osc/*/stats |
+ awk -vwrites=0 '/ost_write/ { writes += $2 } END { print writes; }'
+}
+
+# decent default
+WRITEBACK_SAVE=500
+
+start_writeback() {
+ # in 2.6, restore /proc/sys/vm/dirty_writeback_centisecs
+ if [ -f /proc/sys/vm/dirty_writeback_centisecs ]; then
+ echo $WRITEBACK_SAVE > /proc/sys/vm/dirty_writeback_centisecs
+ else
+ # if file not here, we are a 2.4 kernel
+ kill -CONT `pidof kupdated`
+ fi
+}
+stop_writeback() {
+ # setup the trap first, so someone cannot exit the test at the
+ # exact wrong time and mess up a machine
+ trap start_writeback EXIT
+ # in 2.6, save and 0 /proc/sys/vm/dirty_writeback_centisecs
+ if [ -f /proc/sys/vm/dirty_writeback_centisecs ]; then
+ WRITEBACK_SAVE=`cat /proc/sys/vm/dirty_writeback_centisecs`
+ echo 0 > /proc/sys/vm/dirty_writeback_centisecs
+ else
+ # if file not here, we are a 2.4 kernel
+ kill -STOP `pidof kupdated`
+ fi
+}
+
+# ensure that all stripes have some grant before we test client-side cache
+setup_test42() {
+ [ "$SETUP_TEST42" ] && return
+ for i in `seq -f $DIR/f42-%g 1 $OSTCOUNT`; do
+ dd if=/dev/zero of=$i bs=4k count=1
+ rm $i
+ done
+ SETUP_TEST42=DONE
+}
+
+# Tests 42* verify that our behaviour is correct WRT caching, file closure,
+# file truncation, and file removal.
+test_42a() {
+ setup_test42
+ cancel_lru_locks OSC
+ stop_writeback
+ sync; sleep 1; sync # just to be safe
+ BEFOREWRITES=`count_ost_writes`
+ grep [0-9] /proc/fs/lustre/osc/OSC*MNT*/cur_grant_bytes
+ dd if=/dev/zero of=$DIR/f42a bs=1024 count=100
+ AFTERWRITES=`count_ost_writes`
+ [ $BEFOREWRITES -eq $AFTERWRITES ] || \
+ error "$BEFOREWRITES < $AFTERWRITES"
+ start_writeback
+}
+run_test 42a "ensure that we don't flush on close =============="
+
+test_42b() {
+ setup_test42
+ cancel_lru_locks OSC
+ stop_writeback
+ sync
+ dd if=/dev/zero of=$DIR/f42b bs=1024 count=100
+ BEFOREWRITES=`count_ost_writes`
+ $MUNLINK $DIR/f42b || error "$MUNLINK $DIR/f42b: $?"
+ AFTERWRITES=`count_ost_writes`
+ [ $BEFOREWRITES -eq $AFTERWRITES ] ||
+ error "$BEFOREWRITES < $AFTERWRITES on unlink"
+ BEFOREWRITES=`count_ost_writes`
+ sync || error "sync: $?"
+ AFTERWRITES=`count_ost_writes`
+ [ $BEFOREWRITES -eq $AFTERWRITES ] ||
+ error "$BEFOREWRITES < $AFTERWRITES on sync"
+ dmesg | grep 'error from obd_brw_async' && error 'error writing back'
+ start_writeback
+ return 0
+}
+run_test 42b "test destroy of file with cached dirty data ======"
+
+# if these tests just want to test the effect of truncation,
+# they have to be very careful. consider:
+# - the first open gets a {0,EOF}PR lock
+# - the first write conflicts and gets a {0, count-1}PW
+# - the rest of the writes are under {count,EOF}PW
+# - the open for truncate tries to match a {0,EOF}PR
+# for the filesize and cancels the PWs.
+# any number of fixes (don't get {0,EOF} on open, match
+# composite locks, do smarter file size management) fix
+# this, but for now we want these tests to verify that
+# the cancellation with truncate intent works, so we
+# start the file with a full-file pw lock to match against
+# until the truncate.
+trunc_test() {
+ test=$1
+ file=$DIR/$test
+ offset=$2
+ cancel_lru_locks OSC
+ stop_writeback
+ # prime the file with 0,EOF PW to match
+ touch $file
+ $TRUNCATE $file 0
+ sync; sync
+ # now the real test..
+ dd if=/dev/zero of=$file bs=1024 count=100
+ BEFOREWRITES=`count_ost_writes`
+ $TRUNCATE $file $offset
+ cancel_lru_locks OSC
+ AFTERWRITES=`count_ost_writes`
+ start_writeback
+}
+
+test_42c() {
+ trunc_test 42c 1024
+ [ $BEFOREWRITES -eq $AFTERWRITES ] && \
+ error "$BEFOREWRITES < $AFTERWRITES on truncate"
+ rm $file
+}
+run_test 42c "test partial truncate of file with cached dirty data"
+
+test_42d() {
+ trunc_test 42d 0
+ [ $BEFOREWRITES -eq $AFTERWRITES ] || \
+ error "beforewrites $BEFOREWRITES != afterwrites $AFTERWRITES on truncate"
+ rm $file
+}
+run_test 42d "test complete truncate of file with cached dirty data"
+
+test_43() {
+ mkdir $DIR/d43
+ cp -p /bin/ls $DIR/d43/f
+ exec 100>> $DIR/d43/f
+ $DIR/d43/f && error || true
+ exec 100<&-
+}
+run_test 43 "execution of file opened for write should return -ETXTBSY"
+
+test_43a() {
+ mkdir -p $DIR/d43
+ cp -p `which multiop` $DIR/d43/multiop
+ $DIR/d43/multiop $TMP/test43.junk O_c &
+ MULTIPID=$!
+ sleep 1
+ multiop $DIR/d43/multiop Oc && error "expected error, got success"
+ kill -USR1 $MULTIPID || return 2
+ wait $MULTIPID || return 3
+}
+run_test 43a "open(RDWR) of file being executed should return -ETXTBSY"
+
+test_43b() {
+ mkdir -p $DIR/d43
+ cp -p `which multiop` $DIR/d43/multiop
+ $DIR/d43/multiop $TMP/test43.junk O_c &
+ MULTIPID=$!
+ sleep 1
+ truncate $DIR/d43/multiop 0 && error "expected error, got success"
+ kill -USR1 $MULTIPID || return 2
+ wait $MULTIPID || return 3
+}
+run_test 43b "truncate of file being executed should return -ETXTBSY"
+
+test_43c() {
+ local testdir="$DIR/d43c"
+ mkdir -p $testdir
+ cp $SHELL $testdir/
+ ( cd $(dirname $SHELL) && md5sum $(basename $SHELL) ) | \
+ ( cd $testdir && md5sum -c)
+}
+run_test 43c "md5sum of copy into lustre========================"
+
+test_44() {
+ [ "$OSTCOUNT" -lt "2" ] && echo "skipping 2-stripe test" && return
+ dd if=/dev/zero of=$DIR/f1 bs=4k count=1 seek=1023
+ dd if=$DIR/f1 bs=4k count=1
+}
+run_test 44 "zero length read from a sparse stripe ============="
+
+test_44a() {
+ local nstripe=`$LCTL lov_getconfig $DIR | grep default_stripe_count: | \
+ awk '{print $2}'`
+ local stride=`$LCTL lov_getconfig $DIR | grep default_stripe_size: | \
+ awk '{print $2}'`
+ if [ $nstripe -eq 0 ] ; then
+ nstripe=`$LCTL lov_getconfig $DIR | grep obd_count: | awk '{print $2}'`
+ fi
+
+ OFFSETS="0 $((stride/2)) $((stride-1))"
+ for offset in $OFFSETS ; do
+ for i in `seq 0 $((nstripe-1))`; do
+ rm -f $DIR/d44a
+ local GLOBALOFFSETS=""
+ local size=$((((i + 2 * $nstripe )*$stride + $offset))) # Bytes
+ ll_sparseness_write $DIR/d44a $size || error "ll_sparseness_write"
+ GLOBALOFFSETS="$GLOBALOFFSETS $size"
+ ll_sparseness_verify $DIR/d44a $GLOBALOFFSETS \
+ || error "ll_sparseness_verify $GLOBALOFFSETS"
+
+ for j in `seq 0 $((nstripe-1))`; do
+ size=$((((j + $nstripe )*$stride + $offset))) # Bytes
+ ll_sparseness_write $DIR/d44a $size || error "ll_sparseness_write"
+ GLOBALOFFSETS="$GLOBALOFFSETS $size"
+ done
+ ll_sparseness_verify $DIR/d44a $GLOBALOFFSETS \
+ || error "ll_sparseness_verify $GLOBALOFFSETS"
+ done
+ done
+}
+run_test 44a "test sparse pwrite ==============================="
+
+dirty_osc_total() {
+ tot=0
+ for d in /proc/fs/lustre/osc/*/cur_dirty_bytes; do
+ tot=$(($tot + `cat $d`))
+ done
+ echo $tot
+}
+do_dirty_record() {
+ before=`dirty_osc_total`
+ echo executing "\"$*\""
+ eval $*
+ after=`dirty_osc_total`
+ echo before $before, after $after
+}
+test_45() {
+ f="$DIR/f45"
+ # Obtain grants from OST if it supports it
+ echo blah > ${f}_grant
+ stop_writeback
+ sync
+ do_dirty_record "echo blah > $f"
+ [ $before -eq $after ] && error "write wasn't cached"
+ do_dirty_record "> $f"
+ [ $before -gt $after ] || error "truncate didn't lower dirty count"
+ do_dirty_record "echo blah > $f"
+ [ $before -eq $after ] && error "write wasn't cached"
+ do_dirty_record "sync"
+ [ $before -gt $after ] || error "writeback didn't lower dirty count"
+ do_dirty_record "echo blah > $f"
+ [ $before -eq $after ] && error "write wasn't cached"
+ do_dirty_record "cancel_lru_locks OSC"
+ [ $before -gt $after ] || error "lock cancellation didn't lower dirty count"
+ start_writeback
+}
+run_test 45 "osc io page accounting ============================"
+
+page_size() {
+ getconf PAGE_SIZE
+}
+
+# in a 2 stripe file (lov.sh), page 1023 maps to page 511 in its object. this
+# test tickles a bug where re-dirtying a page was failing to be mapped to the
+# objects offset and an assert hit when an rpc was built with 1023's mapped
+# offset 511 and 511's raw 511 offset. it also found general redirtying bugs.
+test_46() {
+ f="$DIR/f46"
+ stop_writeback
+ sync
+ dd if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ sync
+ dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=1023 count=1
+ dd conv=notrunc if=/dev/zero of=$f bs=`page_size` seek=511 count=1
+ sync
+ start_writeback
+}
+run_test 46 "dirtying a previously written page ================"
+
+# Check that device nodes are created and then visible correctly (#2091)
+test_47() {
+ cmknod $DIR/test_47_node || error
+}
+run_test 47 "Device nodes check ================================"
+
+test_48a() { # bug 2399
+ check_kernel_version 34 || return 0
+ mkdir -p $DIR/d48a
+ cd $DIR/d48a
+ mv $DIR/d48a $DIR/d48.new || error "move directory failed"
+ mkdir $DIR/d48a || error "recreate directory failed"
+ touch foo || error "'touch foo' failed after recreating cwd"
+ mkdir bar || error "'mkdir foo' failed after recreating cwd"
+ ls . || error "'ls .' failed after recreating cwd"
+ ls .. || error "'ls ..' failed after removing cwd"
+ cd . || error "'cd .' failed after recreating cwd"
+ mkdir . && error "'mkdir .' worked after recreating cwd"
+ rmdir . && error "'rmdir .' worked after recreating cwd"
+ ln -s . baz || error "'ln -s .' failed after recreating cwd"
+ cd .. || error "'cd ..' failed after recreating cwd"
+}
+run_test 48a "Access renamed working dir (should return errors)="
+
+test_48b() { # bug 2399
+ check_kernel_version 34 || return 0
+ mkdir -p $DIR/d48b
+ cd $DIR/d48b
+ rmdir $DIR/d48b || error "remove cwd $DIR/d48b failed"
+ touch foo && error "'touch foo' worked after removing cwd"
+ mkdir foo && error "'mkdir foo' worked after removing cwd"
+ ls . && error "'ls .' worked after removing cwd"
+ ls .. || error "'ls ..' failed after removing cwd"
+ cd . && error "'cd .' worked after removing cwd"
+ mkdir . && error "'mkdir .' worked after removing cwd"
+ rmdir . && error "'rmdir .' worked after removing cwd"
+ ln -s . foo && error "'ln -s .' worked after removing cwd" || true
+ #cd .. || error "'cd ..' failed after removing cwd"
+}
+run_test 48b "Access removed working dir (should return errors)="
+
+test_48c() { # bug 2350
+ check_kernel_version 36 || return 0
+ #sysctl -w portals.debug=-1
+ #set -vx
+ mkdir -p $DIR/d48c/dir
+ cd $DIR/d48c/dir
+ $TRACE rmdir $DIR/d48c/dir || error "remove cwd $DIR/d48c/dir failed"
+ $TRACE touch foo && error "'touch foo' worked after removing cwd"
+ $TRACE mkdir foo && error "'mkdir foo' worked after removing cwd"
+ $TRACE ls . && error "'ls .' worked after removing cwd"
+ $TRACE ls .. || error "'ls ..' failed after removing cwd"
+ $TRACE cd . && error "'cd .' worked after recreate cwd"
+ $TRACE mkdir . && error "'mkdir .' worked after removing cwd"
+ $TRACE rmdir . && error "'rmdir .' worked after removing cwd"
+ $TRACE ln -s . foo && error "'ln -s .' worked after removing cwd" ||true
+ $TRACE cd .. || echo "'cd ..' failed after removing cwd (`pwd)`"
+}
+run_test 48c "Access removed working subdir (should return errors)"
+
+test_48d() { # bug 2350
+ check_kernel_version 36 || return 0
+ #sysctl -w portals.debug=-1
+ #set -vx
+ mkdir -p $DIR/d48d/dir
+ cd $DIR/d48d/dir
+ pwd
+ ls .
+ $TRACE rm -vr $DIR/d48d || error "remove cwd+parent $DIR/d48d failed"
+ $TRACE touch foo && error "'touch foo' worked after removing cwd"
+ $TRACE mkdir foo && error "'mkdir foo' worked after removing cwd"
+ $TRACE ls . && error "'ls .' worked after removing cwd"
+ $TRACE ls .. && echo "'ls ..' worked after removing cwd" # bug 3415
+ $TRACE cd . && error "'cd .' worked after recreate cwd"
+ $TRACE mkdir . && error "'mkdir .' worked after removing cwd"
+ $TRACE rmdir . && error "'rmdir .' worked after removing cwd"
+ $TRACE ln -s . foo && error "'ln -s .' worked after removing cwd" ||true
+ $TRACE cd .. && error "'cd ..' worked after removing cwd" || true
+}
+run_test 48d "Access removed parent subdir (should return errors)"
+
+test_50() {
+ # bug 1485
+ mkdir $DIR/d50
+ cd $DIR/d50
+ ls /proc/$$/cwd || error
+}
+run_test 50 "special situations: /proc symlinks ==============="
+
+test_51() {
+ # bug 1516 - create an empty entry right after ".." then split dir
+ mkdir $DIR/d49
+ touch $DIR/d49/foo
+ $MCREATE $DIR/d49/bar
+ rm $DIR/d49/foo
+ createmany -m $DIR/d49/longfile 201
+ FNUM=202
+ while [ `ls -sd $DIR/d49 | awk '{ print $1 }'` -eq 4 ]; do
+ $MCREATE $DIR/d49/longfile$FNUM
+ FNUM=$(($FNUM + 1))
+ echo -n "+"
+ done
+ ls -l $DIR/d49 > /dev/null || error
+}
+run_test 51 "special situations: split htree with empty entry =="
+
+test_52a() {
+ [ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
+ mkdir -p $DIR/d52a
+ touch $DIR/d52a/foo
+ chattr =a $DIR/d52a/foo || error
+ echo bar >> $DIR/d52a/foo || error
+ cp /etc/hosts $DIR/d52a/foo && error
+ rm -f $DIR/d52a/foo 2>/dev/null && error
+ link $DIR/d52a/foo $DIR/d52a/foo_link 2>/dev/null && error
+ echo foo >> $DIR/d52a/foo || error
+ mrename $DIR/d52a/foo $DIR/d52a/foo_ren && error
+ lsattr $DIR/d52a/foo | egrep -q "^-+a-+ $DIR/d52a/foo" || error
+ chattr -a $DIR/d52a/foo || error
+
+ rm -fr $DIR/d52a || error
+}
+run_test 52a "append-only flag test (should return errors) ====="
+
+test_52b() {
+ [ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
+ mkdir -p $DIR/d52b
+ touch $DIR/d52b/foo
+ chattr =i $DIR/d52b/foo || error
+ cat test > $DIR/d52b/foo && error
+ cp /etc/hosts $DIR/d52b/foo && error
+ rm -f $DIR/d52b/foo 2>/dev/null && error
+ link $DIR/d52b/foo $DIR/d52b/foo_link 2>/dev/null && error
+ echo foo >> $DIR/d52b/foo && error
+ mrename $DIR/d52b/foo $DIR/d52b/foo_ren && error
+ [ -f $DIR/d52b/foo ] || error
+ [ -f $DIR/d52b/foo_ren ] && error
+ lsattr $DIR/d52b/foo | egrep -q "^-+i-+ $DIR/d52b/foo" || error
+ chattr -i $DIR/d52b/foo || error
+
+ rm -fr $DIR/d52b || error
+}
+run_test 52b "immutable flag test (should return errors) ======="
+
+test_53() {
+ for i in `ls -d /proc/fs/lustre/osc/OSC*mds1 2> /dev/null` ; do
+ ostname=`echo $i | cut -d _ -f 3-4 | sed -e s/_mds1//`
+ ost_last=`cat /proc/fs/lustre/obdfilter/$ostname/last_id`
+ mds_last=`cat $i/prealloc_last_id`
+ echo "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
+ if [ $ost_last != $mds_last ]; then
+ error "$ostname.last_id=$ost_last ; MDS.last_id=$mds_last"
+ fi
+ done
+}
+run_test 53 "verify that MDS and OSTs agree on pre-creation ===="
+
+test_54a() {
+ $SOCKETSERVER $DIR/socket
+ $SOCKETCLIENT $DIR/socket || error
+ $MUNLINK $DIR/socket
+}
+run_test 54a "unix damain socket test =========================="
+
+test_54b() {
+ f="$DIR/f54b"
+ mknod $f c 1 3
+ chmod 0666 $f
+ dd if=/dev/zero of=$f bs=`page_size` count=1
+}
+run_test 54b "char device works in lustre ======================"
+
+test_54c() {
+ tfile="$DIR/f54c"
+ tdir="$DIR/d54c"
+ loopdev="$DIR/loop54c"
+
+ for i in `seq 3 7`; do
+ rm -f $loopdev
+ mknod $loopdev b 7 $i
+ losetup $loopdev > /dev/null 2>&1 || break
+ done
+ echo "make a loop file system with $tfile on $loopdev ($i)..."
+ dd if=/dev/zero of=$tfile bs=`page_size` seek=1024 count=1 > /dev/null
+ losetup $loopdev $tfile || error "can't set up $loopdev for $tfile"
+ mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
+ mkdir -p $tdir
+ mount -t ext2 $loopdev $tdir || error "error mounting $loopdev on $tdir"
+ dd if=/dev/zero of=$tdir/tmp bs=`page_size` count=30 || error "dd write"
+ df $tdir
+ dd if=$tdir/tmp of=/dev/zero bs=`page_size` count=30 || error "dd read"
+ umount $tdir
+ losetup -d $loopdev
+ rm $loopdev
+}
+run_test 54c "block device works in lustre ====================="
+
+test_54d() {
+ f="$DIR/f54d"
+ string="aaaaaa"
+ mknod $f p
+ [ "$string" = `echo $string > $f | cat $f` ] || error
+}
+run_test 54d "fifo device works in lustre ======================"
+
+test_55() {
+ rm -rf $DIR/d55
+ mkdir $DIR/d55
+ mount -t $FSTYPE -o loop,iopen $EXT2_DEV $DIR/d55 || error
+ touch $DIR/d55/foo
+ $IOPENTEST1 $DIR/d55/foo $DIR/d55 || error
+ $IOPENTEST2 $DIR/d55 || error
+ echo "check for $EXT2_DEV. Please wait..."
+ rm -rf $DIR/d55/*
+ umount $DIR/d55 || error
+}
+run_test 55 "check iopen_connect_dentry() ======================"
+
+test_56() {
+ rm -rf $DIR/d56
+ mkdir $DIR/d56
+ mkdir $DIR/d56/dir
+ NUMFILES=3
+ NUMFILESx2=$(($NUMFILES * 2))
+ for i in `seq 1 $NUMFILES` ; do
+ touch $DIR/d56/file$i
+ touch $DIR/d56/dir/file$i
+ done
+
+ # test lfs find with --recursive
+ FILENUM=`$LFIND --recursive $DIR/d56 | grep -c obdidx`
+ [ $FILENUM -eq $NUMFILESx2 ] || error \
+ "lfs find --recursive $DIR/d56 wrong: found $FILENUM, expected $NUMFILESx2"
+ FILENUM=`$LFIND $DIR/d56 | grep -c obdidx`
+ [ $FILENUM -eq $NUMFILES ] || error \
+ "lfs find $DIR/d56 without --recursive wrong: found $FILENUM,
+ expected $NUMFILES"
+ echo "lfs find --recursive passed."
+
+ # test lfs find with file instead of dir
+ FILENUM=`$LFIND $DIR/d56/file1 | grep -c obdidx`
+ [ $FILENUM -eq 1 ] || error \
+ "lfs find $DIR/d56/file1 wrong:found $FILENUM, expected 1"
+ echo "lfs find file passed."
+
+ #test lfs find with --verbose
+ [ `$LFIND --verbose $DIR/d56 | grep -c lmm_magic` -eq $NUMFILES ] ||\
+ error "lfs find --verbose $DIR/d56 wrong: should find $NUMFILES lmm_magic info"
+ [ `$LFIND $DIR/d56 | grep -c lmm_magic` -eq 0 ] || error \
+ "lfs find $DIR/d56 without --verbose wrong: should not show lmm_magic info"
+ echo "lfs find --verbose passed."
+
+ #test lfs find with --obd
+ $LFIND --obd wrong_uuid $DIR/d56 2>&1 | grep -q "unknown obduuid" || \
+ error "lfs find --obd wrong_uuid should return error information"
+
+ [ "$OSTCOUNT" -lt 2 ] && \
+ echo "skipping other lfs find --obd test" && return
+ FILENUM=`$LFIND --recursive $DIR/d56 | sed -n '/^[ ]*1[ ]/p' | wc -l`
+ OBDUUID=`$LFIND --recursive $DIR/d56 | sed -n '/^[ ]*1:/p' | awk '{print $2}'`
+ FOUND=`$LFIND -r --obd $OBDUUID $DIR/d56 | wc -l`
+ [ $FOUND -eq $FILENUM ] || \
+ error "lfs find --obd wrong: found $FOUND, expected $FILENUM"
+ [ `$LFIND -r -v --obd $OBDUUID $DIR/d56 | sed '/^[ ]*1[ ]/d' | \
+ sed -n '/^[ ]*[0-9][0-9]*[ ]/p' | wc -l` -eq 0 ] || \
+ error "lfs find --obd wrong: should not show file on other obd"
+ echo "lfs find --obd passed."
+}
+run_test 56 "check lfs find ===================================="
+
+test_57a() {
+ # note test will not do anything if MDS is not local
+ for DEV in `cat /proc/fs/lustre/mds/*/mntdev`; do
+ dumpe2fs -h $DEV > $TMP/t57a.dump || error "can't access $DEV"
+ DEVISIZE=`awk '/Inode size:/ { print $3 }' $TMP/t57a.dump`
+ [ "$DEVISIZE" -gt 128 ] || error "inode size $DEVISIZE"
+ rm $TMP/t57a.dump
+ done
+}
+run_test 57a "verify MDS filesystem created with large inodes =="
+
+test_57b() {
+ FILECOUNT=100
+ FILE1=$DIR/d57b/f1
+ FILEN=$DIR/d57b/f$FILECOUNT
+ rm -rf $DIR/d57b || error "removing $DIR/d57b"
+ mkdir -p $DIR/d57b || error "creating $DIR/d57b"
+ echo "mcreating $FILECOUNT files"
+ createmany -m $DIR/d57b/f 1 $FILECOUNT || \
+ error "creating files in $DIR/d57b"
+
+ # verify that files do not have EAs yet
+ $LFIND $FILE1 2>&1 | grep -q "no stripe" || error "$FILE1 has an EA"
+ $LFIND $FILEN 2>&1 | grep -q "no stripe" || error "$FILEN has an EA"
+
+ MDSFREE="`cat /proc/fs/lustre/mds/*/kbytesfree`"
+ MDCFREE="`cat /proc/fs/lustre/mdc/*/kbytesfree`"
+ echo "opening files to create objects/EAs"
+ for FILE in `seq -f $DIR/d57b/f%g 1 $FILECOUNT`; do
+ $OPENFILE -f O_RDWR $FILE > /dev/null || error "opening $FILE"
+ done
+
+ # verify that files have EAs now
+ $LFIND $FILE1 | grep -q "obdidx" || error "$FILE1 missing EA"
+ $LFIND $FILEN | grep -q "obdidx" || error "$FILEN missing EA"
+
+ MDSFREE2="`cat /proc/fs/lustre/mds/*/kbytesfree`"
+ MDCFREE2="`cat /proc/fs/lustre/mdc/*/kbytesfree`"
+ if [ "$MDCFREE" != "$MDCFREE2" ]; then
+ if [ "$MDSFREE" != "$MDSFREE2" ]; then
+ error "MDC before $MDCFREE != after $MDCFREE2"
+ else
+ echo "MDC before $MDCFREE != after $MDCFREE2"
+ echo "unable to confirm if MDS has large inodes"
+ fi
+ fi
+ rm -rf $DIR/d57b
+}
+run_test 57b "default LOV EAs are stored inside large inodes ==="
+
+test_58() {
+ wiretest
+}
+run_test 58 "verify cross-platform wire constants =============="
+
+test_59() {
+ echo "touch 130 files"
+ for i in `seq 1 130` ; do
+ touch $DIR/59-$i
+ done
+ echo "rm 130 files"
+ for i in `seq 1 130` ; do
+ rm -f $DIR/59-$i
+ done
+ sync
+ sleep 2
+ # wait for commitment of removal
+}
+run_test 59 "verify cancellation of llog records async ========="
+
+test_60() {
+ echo 60 "llog tests run from kernel mode"
+ sh run-llog.sh
+}
+run_test 60 "llog sanity tests run from kernel module =========="
+
+test_61() {
+ f="$DIR/f61"
+ dd if=/dev/zero of=$f bs=`page_size` count=1
+ cancel_lru_locks OSC
+ multiop $f OSMWUc || error
+ sync
+}
+run_test 61 "mmap() writes don't make sync hang ================"
+
+# bug 2330 - insufficient obd_match error checking causes LBUG
+test_62() {
+ f="$DIR/f62"
+ echo foo > $f
+ cancel_lru_locks OSC
+ echo 0x405 > /proc/sys/lustre/fail_loc
+ cat $f && error "cat succeeded, expect -EIO"
+ echo 0 > /proc/sys/lustre/fail_loc
+}
+run_test 62 "verify obd_match failure doesn't LBUG (should -EIO)"
+
+# bug 2319 - oig_wait() interrupted causes crash because of invalid waitq.
+test_63() {
+ MAX_DIRTY_MB=`cat /proc/fs/lustre/osc/*/max_dirty_mb | head -n 1`
+ for i in /proc/fs/lustre/osc/*/max_dirty_mb ; do
+ echo 0 > $i
+ done
+ for i in `seq 10` ; do
+ dd if=/dev/zero of=$DIR/f63 bs=8k &
+ sleep 5
+ kill $!
+ sleep 1
+ done
+
+ for i in /proc/fs/lustre/osc/*/max_dirty_mb ; do
+ echo $MAX_DIRTY_MB > $i
+ done
+ true
+}
+run_test 63 "Verify oig_wait interruption does not crash ======"
+
+test_64a () {
+ df $DIR
+ grep "[0-9]" /proc/fs/lustre/osc/OSC*MNT*/cur*
+}
+run_test 64a "verify filter grant calculations (in kernel) ====="
+
+test_64b () {
+ sh oos.sh $MOUNT
+}
+run_test 64b "check out-of-space detection on client ==========="
+
+# bug 1414 - set/get directories' stripe info
+test_65a() {
+ mkdir -p $DIR/d65
+ touch $DIR/d65/f1
+ $LVERIFY $DIR/d65 $DIR/d65/f1 || error "lverify failed"
+}
+run_test 65a "directory with no stripe info ===================="
+
+test_65b() {
+ mkdir -p $DIR/d65
+ $LSTRIPE $DIR/d65 $(($STRIPESIZE * 2)) 0 1 || error "setstripe"
+ touch $DIR/d65/f2
+ $LVERIFY $DIR/d65 $DIR/d65/f2 || error "lverify failed"
+}
+run_test 65b "directory setstripe $(($STRIPESIZE * 2)) 0 1 ==============="
+
+test_65c() {
+ if [ $OSTCOUNT -gt 1 ]; then
+ mkdir -p $DIR/d65
+ $LSTRIPE $DIR/d65 $(($STRIPESIZE * 4)) 1 \
+ $(($OSTCOUNT - 1)) || error "setstripe"
+ touch $DIR/d65/f3
+ $LVERIFY $DIR/d65 $DIR/d65/f3 || error "lverify failed"
+ fi
+}
+run_test 65c "directory setstripe $(($STRIPESIZE * 4)) 1 $(($OSTCOUNT - 1))"
+
+[ $STRIPECOUNT -eq 0 ] && sc=1 || sc=$(($STRIPECOUNT - 1))
+
+test_65d() {
+ mkdir -p $DIR/d65
+ $LSTRIPE $DIR/d65 $STRIPESIZE -1 $sc || error "setstripe"
+ touch $DIR/d65/f4 $DIR/d65/f5
+ $LVERIFY $DIR/d65 $DIR/d65/f4 $DIR/d65/f5 || error "lverify failed"
+}
+run_test 65d "directory setstripe $STRIPESIZE -1 $sc ======================"
+
+test_65e() {
+ mkdir -p $DIR/d65
+
+ $LSTRIPE $DIR/d65 0 -1 0 || error "setstripe"
+ touch $DIR/d65/f6
+ $LVERIFY $DIR/d65 $DIR/d65/f6 || error "lverify failed"
+}
+run_test 65e "directory setstripe 0 -1 0 (default) ============="
+
+test_65f() {
+ mkdir -p $DIR/d65f
+ $RUNAS $LSTRIPE $DIR/d65f 0 -1 0 && error "setstripe succeeded" || true
+}
+run_test 65f "dir setstripe permission (should return error) ==="
+
+# bug 2543 - update blocks count on client
+test_66() {
+ COUNT=${COUNT:-8}
+ dd if=/dev/zero of=$DIR/f66 bs=1k count=$COUNT
+ sync
+ BLOCKS=`ls -s $DIR/f66 | awk '{ print $1 }'`
+ [ $BLOCKS -ge $COUNT ] || error "$DIR/f66 blocks $BLOCKS < $COUNT"
+}
+run_test 66 "update inode blocks count on client ==============="
+
+test_67() { # bug 3285 - supplementary group fails on MDS, passes on client
+ [ "$RUNAS_ID" = "$UID" ] && echo "skipping test 67" && return
+ check_kernel_version 35 || return 0
+ mkdir $DIR/d67
+ chmod 771 $DIR/d67
+ chgrp $RUNAS_ID $DIR/d67
+ $RUNAS -g $((RUNAS_ID + 1)) -G1,2,$RUNAS_ID ls $DIR/d67 && error || true
+}
+run_test 67 "supplementary group failure (should return error) ="
+
# on the LLNL clusters, runas will still pick up root's $TMP settings,
# which will not be writable for the runas user, and then you get a CVS
# error message with a corrupt path string (CVS bug) and panic.
[ $RUNAS_ID -ne $UID ] && HOME=/tmp
test_99a() {
- echo 99 "cvs operations ===================================="
mkdir -p $DIR/d99cvsroot
chown $RUNAS_ID $DIR/d99cvsroot
$RUNAS cvs -d $DIR/d99cvsroot init || error
run_test 99a "cvs init ========================================="
test_99b() {
+ [ ! -d $DIR/d99cvsroot ] && test_99a
cd /etc/init.d
- $RUNAS cvs -d $DIR/d99cvsroot import -m "nomesg" d99reposname vtag rtag
+ # some versions of cvs import exit(1) when asked to import links or
+ # files they can't read. ignore those files.
+ TOIGNORE=$(find . -type l -printf '-I %f\n' -o \
+ ! -perm +4 -printf '-I %f\n')
+ $RUNAS cvs -d $DIR/d99cvsroot import -m "nomesg" $TOIGNORE \
+ d99reposname vtag rtag
}
run_test 99b "cvs import ======================================="
test_99c() {
+ [ ! -d $DIR/d99cvsroot ] && test_99b
cd $DIR
mkdir -p $DIR/d99reposname
chown $RUNAS_ID $DIR/d99reposname
run_test 99c "cvs checkout ====================================="
test_99d() {
+ [ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS touch foo99
$RUNAS cvs add -m 'addmsg' foo99
run_test 99d "cvs add =========================================="
test_99e() {
+ [ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS cvs update
}
run_test 99e "cvs update ======================================="
test_99f() {
+ [ ! -d $DIR/d99cvsroot ] && test_99d
cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
}
HOME=$OLDHOME
log "cleanup: ======================================================"
-rm -rf $DIR/[Rdfs][1-9]*
-if [ "$I_MOUNTED" = "yes" ]; then
- sh llmountcleanup.sh || error
+if [ "`mount | grep ^$NAME`" ]; then
+ rm -rf $DIR/[Rdfs][1-9]*
+ if [ "$I_MOUNTED" = "yes" ]; then
+ sh llmountcleanup.sh || error
+ fi
fi
echo '=========================== finished ==============================='
+[ -f "$SANITYLOG" ] && cat $SANITYLOG && exit 1 || true