cnt_all2mdt=0
cnt_all2all=0
DBENCH_PID=0
-PROC_CLI="srpc.info"
-# Escape "." to use lctl
-PROC_CLI=${PROC_CLI//\./\*}
+PROC_CLI="srpc_info"
# set manually
GSS=true
rm -rf $DIR/[df][0-9]*
-check_runas_id $RUNAS_ID $RUNAS
+check_runas_id $RUNAS_ID $RUNAS_ID $RUNAS
build_test_filter
echo $cnt;
}
+flvr_cnt_mgc2mgs()
+{
+ local flavor=$1
+
+ output=`do_facet client lctl get_param -n mgc.*.$PROC_CLI 2>/dev/null`
+ count_flvr "$output" $flavor
+}
+
do_check_flavor()
{
local dir=$1 # from to
chmod 0777 $DIR || error "chmod $DIR failed"
# access w/o cred
$RUNAS kdestroy
+ $RUNAS $LFS flushctx || error "can't flush ctx"
$RUNAS touch $file && error "unexpected success"
# access w/ cred
[ $num_osts -lt 2 ] && echo "skipping $TESTNAME (must have >= 2 OSTs)" && return
mkdir $tdir || error
- $LFS setstripe $tdir 0 -1 -1 || error
+ $LFS setstripe -c $num_osts $tdir || error
echo "creating..."
for ((i=0;i<20;i++)); do
test_8()
{
- debugsave
- sysctl -w lnet.debug="other"
+ local ATHISTORY=$(do_facet mds "find /sys/ -name at_history")
+ local ATOLDBASE=$(do_facet mds "cat $ATHISTORY")
+ do_facet mds "echo 8 >> $ATHISTORY"
+
$LCTL dk > /dev/null
+ debugsave
+ sysctl -w lnet.debug="+other"
+
+ mkdir -p $DIR/d8
+ chmod a+w $DIR/d8
+
+ REQ_DELAY=`lctl get_param -n mdc.${FSNAME}-MDT0000-mdc-*.timeouts |
+ awk '/portal 12/ {print $5}' | tail -1`
+ REQ_DELAY=$((${REQ_DELAY} + ${REQ_DELAY} / 4 + 5))
# sleep sometime in ctx handle
- do_facet mds sysctl -w lustre.fail_val=60
+ do_facet mds lctl set_param fail_val=$REQ_DELAY
#define OBD_FAIL_SEC_CTX_HDL_PAUSE 0x1204
- do_facet mds sysctl -w lustre.fail_loc=0x1204
+ do_facet mds lctl set_param fail_loc=0x1204
$RUNAS $LFS flushctx || error "can't flush ctx"
- $RUNAS df $DIR &
- DFPID=$!
- echo "waiting df (pid $TOUCHPID) to finish..."
- sleep 2 # give df a chance to really trigger context init rpc
+ $RUNAS touch $DIR/d8/f &
+ TOUCHPID=$!
+ echo "waiting for touch (pid $TOUCHPID) to finish..."
+ sleep 2 # give it a chance to really trigger context init rpc
do_facet mds sysctl -w lustre.fail_loc=0
- wait $DFPID || error "df should have succeeded"
+ wait $TOUCHPID || error "touch should have succeeded"
$LCTL dk | grep "Early reply #" || error "No early reply"
+
debugrestore
+ do_facet mds "echo $ATOLDBASE >> $ATHISTORY" || true
}
run_test 8 "Early reply sent for slow gss context negotiation"
# so each test should not assume any start flavor.
#
-test_50() {
- local sample=$TMP/sanity-gss-8
- local tdir=$MOUNT/dir8
- local iosize="256K"
- local hash_algs="adler32 crc32 md5 sha1 sha256 sha384 sha512 wp256 wp384 wp512"
-
- # create sample file with aligned size for direct i/o
- dd if=/dev/zero of=$sample bs=$iosize count=1 || error
- dd conv=notrunc if=/etc/termcap of=$sample bs=$iosize count=1 || error
-
- rm -rf $tdir
- mkdir $tdir || error "create dir $tdir"
-
- restore_to_default_flavor
-
- for alg in $hash_algs; do
- echo "Testing $alg..."
- flavor=krb5i-bulki:$alg/null
- set_rule $FSNAME any cli2ost $flavor
- wait_flavor cli2ost $flavor $cnt_cli2ost
-
- dd if=$sample of=$tdir/$alg oflag=direct,dsync bs=$iosize || error "$alg write"
- diff $sample $tdir/$alg || error "$alg read"
- done
-
- rm -rf $tdir
- rm -f $sample
-}
-run_test 50 "verify bulk hash algorithms works"
-
-test_51() {
- local s1=$TMP/sanity-gss-9.1
- local s2=$TMP/sanity-gss-9.2
- local s3=$TMP/sanity-gss-9.3
- local s4=$TMP/sanity-gss-9.4
- local tdir=$MOUNT/dir9
- local s1_size=4194304 # n * pagesize (4M)
- local s2_size=512 # n * blksize
- local s3_size=111 # n * blksize + m
- local s4_size=5 # m
- local cipher_algs="arc4 aes128 aes192 aes256 cast128 cast256 twofish128 twofish256"
-
- # create sample files for each situation
- rm -f $s1 $s2 $s2 $s4
- dd if=/dev/urandom of=$s1 bs=1M count=4 || error
- dd if=/dev/urandom of=$s2 bs=$s2_size count=1 || error
- dd if=/dev/urandom of=$s3 bs=$s3_size count=1 || error
- dd if=/dev/urandom of=$s4 bs=$s4_size count=1 || error
-
- rm -rf $tdir
- mkdir $tdir || error "create dir $tdir"
-
- restore_to_default_flavor
-
- #
- # different bulk data alignment will lead to different behavior of
- # the implementation: (n > 0; 0 < m < encryption_block_size)
- # - full page i/o
- # - partial page, size = n * encryption_block_size
- # - partial page, size = n * encryption_block_size + m
- # - partial page, size = m
- #
- for alg in $cipher_algs; do
- echo "Testing $alg..."
- flavor=krb5p-bulkp:sha1/$alg
- set_rule $FSNAME any cli2ost $flavor
- wait_flavor cli2ost $flavor $cnt_cli2ost
-
- # sync write
- dd if=$s1 of=$tdir/$alg.1 oflag=dsync bs=1M || error "write $alg.1"
- dd if=$s2 of=$tdir/$alg.2 oflag=dsync || error "write $alg.2"
- dd if=$s3 of=$tdir/$alg.3 oflag=dsync || error "write $alg.3"
- dd if=$s4 of=$tdir/$alg.4 oflag=dsync || error "write $alg.4"
-
- # remount client
- umount_client $MOUNT
- umount_client $MOUNT2
- mount_client $MOUNT
- mount_client $MOUNT2
-
- # read & compare
- diff $tdir/$alg.1 $s1 || error "read $alg.1"
- diff $tdir/$alg.2 $s2 || error "read $alg.2"
- diff $tdir/$alg.3 $s3 || error "read $alg.3"
- diff $tdir/$alg.4 $s4 || error "read $alg.4"
- done
-
- rm -rf $tdir
- rm -f $sample
-}
-run_test 51 "bulk data alignment test under encryption mode"
-
test_90() {
if [ "$SLOW" = "no" ]; then
total=10
$LFS flushctx
done
check_dbench
+ #sleep to let ctxs be re-established
+ sleep 10
stop_dbench
}
run_test 90 "recoverable from losing contexts under load"
test_99() {
local nrule_old=0
local nrule_new=0
- local max=32
+ local max=64
#
# general rules
for ((i = $nrule_old; i < $max; i++)); do
set_rule $FSNAME elan$i any krb5n || error "set rule $i"
done
- set_rule $FSNAME elan100 any krb5n && error "set $max rule should fail"
for ((i = $nrule_old; i < $max; i++)); do
set_rule $FSNAME elan$i any || error "remove rule $i"
done
for ((i = $nrule_old; i < $max; i++)); do
set_rule $FSNAME-MDT0000 elan$i any krb5i || error "set rule $i"
done
- set_rule $FSNAME-MDT0000 elan100 any krb5i && error "set $max rule should fail"
for ((i = $nrule_old; i < $max; i++)); do
set_rule $FSNAME-MDT0000 elan$i any || error "remove rule $i"
done
error "general rule: $nrule_new != $nrule_old"
fi
}
-run_test 99 "maximum sptlrpc rules limitation"
+run_test 99 "set large number of sptlrpc rules"
error_dbench()
{
}
run_test 102 "survive from insanely fast flavor switch"
+test_150() {
+ local save_opts
+
+ # started from default flavors
+ restore_to_default_flavor
+
+ # at this time no rules has been set on mgs; mgc use null
+ # flavor connect to mgs.
+ count=`flvr_cnt_mgc2mgs null`
+ [ $count -eq 1 ] || error "$count mgc connection use null flavor"
+
+ # umount both clients
+ zconf_umount $HOSTNAME $MOUNT || return 1
+ zconf_umount $HOSTNAME $MOUNT2 || return 2
+
+ # mount client with default flavor - should succeed
+ zconf_mount $HOSTNAME $MOUNT || error "mount with default flavor should have succeeded"
+ zconf_umount $HOSTNAME $MOUNT || return 5
+
+ # mount client with conflict flavor - should fail
+ save_opts=$MOUNTOPT
+ MOUNTOPT="$MOUNTOPT,mgssec=krb5p"
+ zconf_mount $HOSTNAME $MOUNT && error "mount with conflict flavor should have failed"
+ MOUNTOPT=$save_opts
+
+ # mount client with same flavor - should succeed
+ save_opts=$MOUNTOPT
+ MOUNTOPT="$MOUNTOPT,mgssec=null"
+ zconf_mount $HOSTNAME $MOUNT || error "mount with same flavor should have succeeded"
+ zconf_umount $HOSTNAME $MOUNT || return 6
+ MOUNTOPT=$save_opts
+}
+run_test 150 "secure mgs connection: client flavor setting"
+
+test_151() {
+ local save_opts
+
+ # set mgs only accept krb5p
+ set_rule _mgs any any krb5p
+
+ # umount everything, modules still loaded
+ stopall
+
+ # mount mgs with default flavor, in current framework it means mgs+mdt1.
+ # the connection of mgc of mdt1 to mgs is expected fail.
+ DEVNAME=$(mdsdevname 1)
+ start mds1 $DEVNAME $MDS_MOUNT_OPTS && error "mount with default flavor should have failed"
+
+ # mount with unauthorized flavor should fail
+ save_opts=$MDS_MOUNT_OPTS
+ MDS_MOUNT_OPTS="$MDS_MOUNT_OPTS,mgssec=null"
+ start mds1 $DEVNAME $MDS_MOUNT_OPTS && error "mount with unauthorized flavor should have failed"
+ MDS_MOUNT_OPTS=$save_opts
+
+ # mount with designated flavor should succeed
+ save_opts=$MDS_MOUNT_OPTS
+ MDS_MOUNT_OPTS="$MDS_MOUNT_OPTS,mgssec=krb5p"
+ start mds1 $DEVNAME $MDS_MOUNT_OPTS || error "mount with designated flavor should have succeeded"
+ MDS_MOUNT_OPTS=$save_opts
+
+ stop mds1 -f
+}
+run_test 151 "secure mgs connection: server flavor control"
+
equals_msg `basename $0`: test complete, cleaning up
check_and_cleanup_lustre
-[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true
+[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG && grep -q FAIL $TESTSUITELOG && exit 1 || true