-#!/bin/sh
+#!/bin/bash
set -e
+PTLDEBUG=${PTLDEBUG:--1}
LUSTRE=${LUSTRE:-`dirname $0`/..}
+SETUP=${SETUP:-""}
+CLEANUP=${CLEANUP:-""}
. $LUSTRE/tests/test-framework.sh
-
init_test_env $@
-
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
ostfailover_HOST=${ostfailover_HOST:-$ost_HOST}
+#failover= must be defined in OST_MKFS_OPTIONS if ostfailover_HOST != ost_HOST
+
+# Tests that fail on uml
+CPU=`awk '/model/ {print $4}' /proc/cpuinfo`
+[ "$CPU" = "UML" ] && EXCEPT="$EXCEPT 6"
# Skip these tests
-ALWAYS_EXCEPT="5"
-# test 5 needs a larger fs than what local normally has
-
-gen_config() {
- rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE --failover
- if [ ! -z "$ostfailover_HOST" ]; then
- add_ostfailover ost --dev $OSTDEV --size $OSTSIZE
- fi
- add_client client mds --lov lov1 --path $MOUNT
-}
+# BUG NUMBER:
+ALWAYS_EXCEPT="$REPLAY_OST_SINGLE_EXCEPT"
-cleanup() {
- # make sure we are using the primary MDS, so the config log will
- # be able to clean up properly.
- activeost=`facet_active ost`
- if [ $activeost != "ost" ]; then
- fail ost
- fi
- zconf_umount $MOUNT
- stop mds ${FORCE} $MDSLCONFARGS
- stop ost ${FORCE} --dump cleanup.log
-}
+#
+[ "$SLOW" = "no" ] && EXCEPT_SLOW=""
-if [ "$ONLY" == "cleanup" ]; then
- sysctl -w portals.debug=0
- cleanup
- exit
-fi
+# It is replay-ost-single, after all
+OSTCOUNT=1
build_test_filter
-rm -f ostactive
+REFORMAT=--reformat cleanup_and_setup_lustre
+rm -rf $DIR/[df][0-9]*
-gen_config
-
-start ost --reformat $OSTLCONFARGS
-
-[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
-start mds --reformat $MDSLCONFARGS
-zconf_mount $MOUNT
-
-mkdir -p $DIR
+test_0a() {
+ zconf_umount `hostname` $MOUNT -f
+ # needs to run during initial client->OST connection
+ #define OBD_FAIL_OST_ALL_REPLY_NET 0x211
+ do_facet ost "lctl set_param fail_loc=0x80000211"
+ zconf_mount `hostname` $MOUNT && df $MOUNT || error "0a mount fail"
+}
+run_test 0a "target handle mismatch (bug 5317) `date +%H:%M:%S`"
-test_0() {
- fail ost
+test_0b() {
+ fail ost1
cp /etc/profile $DIR/$tfile
sync
diff /etc/profile $DIR/$tfile
+ rm -f $DIR/$tfile
}
-run_test 0 "empty replay"
+run_test 0b "empty replay"
test_1() {
date > $DIR/$tfile
- fail ost
+ fail ost1
$CHECKSTAT -t file $DIR/$tfile || return 1
+ rm -f $DIR/$tfile
}
run_test 1 "touch"
for i in `seq 10`; do
echo "tag-$i" > $DIR/$tfile-$i
done
- fail ost
+ fail ost1
for i in `seq 10`; do
- grep -q "tag-$i" $DIR/$tfile-$i || error "f1c-$i"
+ grep -q "tag-$i" $DIR/$tfile-$i || error "f2-$i"
done
+ rm -f $DIR/$tfile-*
}
run_test 2 "|x| 10 open(O_CREAT)s"
test_3() {
verify=$ROOT/tmp/verify-$$
- dd if=/dev/urandom bs=1024 count=5120 | tee $verify > $DIR/$tfile &
+ dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile &
ddpid=$!
sync &
- fail ost
+ fail ost1
wait $ddpid || return 1
cmp $verify $DIR/$tfile || return 2
rm -f $verify $DIR/$tfile
test_4() {
verify=$ROOT/tmp/verify-$$
- dd if=/dev/urandom bs=1024 count=5120 | tee $verify > $DIR/$tfile
+ dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile
# invalidate cache, so that we're reading over the wire
- for i in /proc/fs/lustre/ldlm/namespaces/OSC_*MNT*; do
- echo -n clear > $i/lru_size
- done
+ cancel_lru_locks osc
cmp $verify $DIR/$tfile &
cmppid=$!
- fail ost
+ fail ost1
wait $cmppid || return 1
rm -f $verify $DIR/$tfile
}
run_test 4 "Fail OST during read, with verification"
test_5() {
- IOZONE_OPTS="-i 0 -i 1 -i 2 -+d -r 64 -s 1g"
+ [ -z "`which iozone 2> /dev/null`" ] && log "iozone missing" && return
+ FREE=`df -P -h $DIR | tail -n 1 | awk '{ print $3 }'`
+ case $FREE in
+ *T|*G) FREE=1G;;
+ esac
+ IOZONE_OPTS="-i 0 -i 1 -i 2 -+d -r 4 -s $FREE"
iozone $IOZONE_OPTS -f $DIR/$tfile &
PID=$!
- sleep 10
- fail ost
- wait $PID || return 1
+ sleep 8
+ fail ost1
+ wait $PID
+ RC=$?
+ log "iozone rc=$RC"
+ rm -f $DIR/$tfile
+ [ $RC -ne 0 ] && return $RC || true
}
run_test 5 "Fail OST during iozone"
-equals_msg test complete, cleaning up
-cleanup
+kbytesfree() {
+ lctl get_param -n osc.*-osc-*.kbytesfree | awk '{total+=$1} END {print total}'
+}
+
+test_6() {
+ f=$DIR/$tfile
+ rm -f $f
+ sync && sleep 2 && sync # wait for delete thread
+ before=`kbytesfree`
+ dd if=/dev/urandom bs=4096 count=1280 of=$f || return 28
+ lfs getstripe $f
+ sync
+ sleep 2 # ensure we have a fresh statfs
+ sync
+#define OBD_FAIL_MDS_REINT_NET_REP 0x119
+ do_facet mds "lctl set_param fail_loc=0x80000119"
+ after_dd=`kbytesfree`
+ log "before: $before after_dd: $after_dd"
+ (( $before > $after_dd )) || return 1
+ rm -f $f
+ fail ost1
+ $CHECKSTAT -t file $f && return 2 || true
+ sync
+ # let the delete happen
+ sleep 5
+ after=`kbytesfree`
+ log "before: $before after: $after"
+ (( $before <= $after + 40 )) || return 3 # take OST logs into account
+}
+run_test 6 "Fail OST before obd_destroy"
+
+test_7() {
+ f=$DIR/$tfile
+ rm -f $f
+ sync && sleep 5 && sync # wait for delete thread
+ before=`kbytesfree`
+ dd if=/dev/urandom bs=4096 count=1280 of=$f || return 4
+ sync
+ sleep 2 # ensure we have a fresh statfs
+ sync
+ after_dd=`kbytesfree`
+ log "before: $before after_dd: $after_dd"
+ (( $before > $after_dd )) || return 1
+ replay_barrier ost1
+ rm -f $f
+ fail ost1
+ $CHECKSTAT -t file $f && return 2 || true
+ sync
+ # let the delete happen
+ sleep 5
+ after=`kbytesfree`
+ log "before: $before after: $after"
+ (( $before <= $after + 40 )) || return 3 # take OST logs into account
+}
+run_test 7 "Fail OST before obd_destroy"
+
+equals_msg `basename $0`: test complete, cleaning up
+check_and_cleanup_lustre
+[ -f "$TESTSUITELOG" ] && cat $TESTSUITELOG || true