-#!/bin/sh
+#!/bin/bash
set -e
+PTLDEBUG=${PTLDEBUG:--1}
LUSTRE=${LUSTRE:-`dirname $0`/..}
. $LUSTRE/tests/test-framework.sh
-
init_test_env $@
-
-. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
ostfailover_HOST=${ostfailover_HOST:-$ost_HOST}
+#failover= must be defined in OST_MKFS_OPTIONS if ostfailover_HOST != ost_HOST
-# Skip these tests
-ALWAYS_EXCEPT="5"
-# test 5 needs a larger fs than what local normally has
+# Tests that fail on uml
+CPU=`awk '/model/ {print $4}' /proc/cpuinfo`
+[ "$CPU" = "UML" ] && EXCEPT="$EXCEPT 6"
-gen_config() {
- rm -f $XMLCONFIG
- if [ "$MDSCOUNT" -gt 1 ]; then
- add_lmv lmv1_svc
- for mds in `mds_list`; do
- MDSDEV=$TMP/${mds}-`hostname`
- add_mds $mds --dev $MDSDEV --size $MDSSIZE --lmv lmv1_svc
- done
- add_lov_to_lmv lov1 lmv1_svc --stripe_sz $STRIPE_BYTES \
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- MDS=lmv1
- else
- add_mds mds1 --dev $MDSDEV --size $MDSSIZE
- add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
- MDS=mds1_svc
+# Skip these tests
+# BUG NUMBER:
+ALWAYS_EXCEPT="$REPLAY_OST_SINGLE_EXCEPT"
- fi
+# It is replay-ost-single, after all
+OSTCOUNT=1
- add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE --failover
- if [ ! -z "$ostfailover_HOST" ]; then
- add_ostfailover ost --dev $OSTDEV --size $OSTSIZE
- fi
- add_client client $MDS --lov lov1 --path $MOUNT
+gen_config() {
+ formatall
}
cleanup() {
- # make sure we are using the primary MDS, so the config log will
- # be able to clean up properly.
- activeost=`facet_active ost`
- if [ $activeost != "ost" ]; then
- fail ost
- fi
- zconf_umount `hostname` $MOUNT
- for mds in `mds_list`; do
- stop $mds ${FORCE} $MDSLCONFARGS
- done
- stop ost ${FORCE} --dump cleanup.log
+ cleanupall
}
if [ "$ONLY" == "cleanup" ]; then
- sysctl -w portals.debug=0
cleanup
exit
fi
SETUP=${SETUP:-"setup"}
CLEANUP=${CLEANUP:-"cleanup"}
+test_0a() {
+ # needs to run during initial client->OST connection
+ #define OBD_FAIL_OST_ALL_REPLY_NET 0x211
+ do_facet ost "sysctl -w lustre.fail_loc=0x80000211"
+ zconf_mount `hostname` $MOUNT && df $MOUNT || error "0a mount fail"
+}
+
setup() {
gen_config
-
- start ost --reformat $OSTLCONFARGS
+ start mds1 `mdsdevname 1` $MDS_MOUNT_OPTS
+ start ost1 `ostdevname 1` $OST_MOUNT_OPTS
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
- for mds in `mds_list`; do
- start $mds --reformat $MDSLCONFARGS
- done
- grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
+
+ # this might not mount if we aren't running test 0a
+ [ -z "`grep " $MOUNT " /proc/mounts`" ] && \
+ run_test 0a "target handle mismatch (bug 5317) `date +%H:%M:%S`"
+
+ if [ -z "`grep " $MOUNT " /proc/mounts`" ]; then
+ zconf_mount `hostname` $MOUNT || error "mount fail"
+ fi
+ sleep 5
+
+ do_facet ost1 "sysctl -w lustre.fail_loc=0"
}
mkdir -p $DIR
$SETUP
-test_0() {
- fail ost
+test_0b() {
+ fail ost1
cp /etc/profile $DIR/$tfile
sync
diff /etc/profile $DIR/$tfile
rm -f $DIR/$tfile
}
-run_test 0 "empty replay"
+run_test 0b "empty replay"
test_1() {
date > $DIR/$tfile
- fail ost
+ fail ost1
$CHECKSTAT -t file $DIR/$tfile || return 1
rm -f $DIR/$tfile
}
for i in `seq 10`; do
echo "tag-$i" > $DIR/$tfile-$i
done
- fail ost
+ fail ost1
for i in `seq 10`; do
grep -q "tag-$i" $DIR/$tfile-$i || error "f2-$i"
done
dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile &
ddpid=$!
sync &
- fail ost
+ fail ost1
wait $ddpid || return 1
cmp $verify $DIR/$tfile || return 2
rm -f $verify $DIR/$tfile
verify=$ROOT/tmp/verify-$$
dd if=/dev/urandom bs=4096 count=1280 | tee $verify > $DIR/$tfile
# invalidate cache, so that we're reading over the wire
- for i in /proc/fs/lustre/ldlm/namespaces/OSC_*MNT*; do
+ for i in /proc/fs/lustre/ldlm/namespaces/*-osc-*; do
echo -n clear > $i/lru_size
done
cmp $verify $DIR/$tfile &
cmppid=$!
- fail ost
+ fail ost1
wait $cmppid || return 1
rm -f $verify $DIR/$tfile
}
run_test 4 "Fail OST during read, with verification"
test_5() {
+ [ -z "`which iozone 2> /dev/null`" ] && log "iozone missing" && return
FREE=`df -P -h $DIR | tail -n 1 | awk '{ print $3 }'`
case $FREE in
*T|*G) FREE=1G;;
PID=$!
sleep 8
- fail ost
- wait $PID || return 1
+ fail ost1
+ wait $PID
+ RC=$?
+ log "iozone rc=$RC"
rm -f $DIR/$tfile
+ [ $RC -ne 0 ] && return $RC || true
}
run_test 5 "Fail OST during iozone"
kbytesfree() {
- awk '{total+=$1} END {print total}' /proc/fs/lustre/osc/OSC_*MNT*/kbytesfree
+ awk '{total+=$1} END {print total}' /proc/fs/lustre/osc/*-osc-*/kbytesfree
}
test_6() {
rm -f $f
sync && sleep 2 && sync # wait for delete thread
before=`kbytesfree`
- dd if=/dev/urandom bs=4096 count=1280 of=$f
+ dd if=/dev/urandom bs=4096 count=1280 of=$f || return 28
+ lfs getstripe $f
+ sync
+ sleep 2 # ensure we have a fresh statfs
+ sync
#define OBD_FAIL_MDS_REINT_NET_REP 0x119
do_facet mds "sysctl -w lustre.fail_loc=0x80000119"
- sync
- sleep 1 # ensure we have a fresh statfs
after_dd=`kbytesfree`
log "before: $before after_dd: $after_dd"
(( $before > $after_dd )) || return 1
rm -f $f
- fail ost
+ fail ost1
$CHECKSTAT -t file $f && return 2 || true
sync
# let the delete happen
- sleep 2
+ sleep 5
after=`kbytesfree`
log "before: $before after: $after"
(( $before <= $after + 40 )) || return 3 # take OST logs into account
test_7() {
f=$DIR/$tfile
rm -f $f
- sync && sleep 2 && sync # wait for delete thread
+ sync && sleep 5 && sync # wait for delete thread
before=`kbytesfree`
- dd if=/dev/urandom bs=4096 count=1280 of=$f
+ dd if=/dev/urandom bs=4096 count=1280 of=$f || return 4
+ sync
+ sleep 2 # ensure we have a fresh statfs
sync
after_dd=`kbytesfree`
log "before: $before after_dd: $after_dd"
(( $before > $after_dd )) || return 1
- replay_barrier ost
+ replay_barrier ost1
rm -f $f
- fail ost
+ fail ost1
$CHECKSTAT -t file $f && return 2 || true
sync
# let the delete happen
- sleep 2
+ sleep 5
after=`kbytesfree`
log "before: $before after: $after"
(( $before <= $after + 40 )) || return 3 # take OST logs into account