init_test_env $@
-. ${CONFIG:=$LUSTRE/tests/cfg/local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/lmv.sh}
gen_config() {
rm -f $XMLCONFIG
- add_mds mds --dev $MDSDEV --size $MDSSIZE
- if [ ! -z "$mdsfailover_HOST" ]; then
- add_mdsfailover mds --dev $MDSDEV --size $MDSSIZE
+ if [ "$MDSCOUNT" -gt 1 ]; then
+ add_lmv lmv1
+ for mds in `mds_list`; do
+ MDSDEV=$TMP/${mds}-`hostname`
+ add_mds $mds --dev $MDSDEV --size $MDSSIZE --lmv lmv1
+ done
+ add_lov_to_lmv lov1 lmv1 --stripe_sz $STRIPE_BYTES \
+ --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+ MDS=lmv1
+ else
+ add_mds mds1 --dev $MDSDEV --size $MDSSIZE
+ add_lov lov1 mds1 --stripe_sz $STRIPE_BYTES \
+ --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+ MDS=mds1_svc
+
fi
-
- add_lov lov1 mds --stripe_sz $STRIPE_BYTES\
- --stripe_cnt $STRIPES_PER_OBJ --stripe_pattern 0
+
add_ost ost --lov lov1 --dev $OSTDEV --size $OSTSIZE
add_ost ost2 --lov lov1 --dev ${OSTDEV}-2 --size $OSTSIZE
- add_client client mds --lov lov1 --path $MOUNT
+ add_client client --mds ${MDS} --lov lov1 --path $MOUNT
}
build_test_filter
+SETUP=${SETUP:-"setup"}
+CLEANUP=${CLEANUP:-"cleanup"}
+
cleanup() {
# make sure we are using the primary MDS, so the config log will
# be able to clean up properly.
- activemds=`facet_active mds`
- if [ $activemds != "mds" ]; then
- fail mds
+ activemds=`facet_active mds1`
+ if [ $activemds != "mds1" ]; then
+ fail mds1
fi
- umount $MOUNT2
- umount $MOUNT
+ umount $MOUNT2 || true
+ umount $MOUNT || true
rmmod llite
- stop mds ${FORCE}
+ for mds in `mds_list`; do
+ stop $mds ${FORCE} $MDSLCONFARGS
+ done
stop ost2 ${FORCE}
stop ost ${FORCE} --dump cleanup-dual.log
}
exit
fi
-gen_config
-start ost --reformat $OSTLCONFARGS
-PINGER=`cat /proc/fs/lustre/pinger`
+setup() {
+ gen_config
+ start ost --reformat $OSTLCONFARGS
+ PINGER=`cat /proc/fs/lustre/pinger`
-if [ "$PINGER" != "on" ]; then
- echo "ERROR: Lustre must be built with --enable-pinger for replay-dual"
- stop mds
- exit 1
-fi
+ if [ "$PINGER" != "on" ]; then
+ echo "ERROR: Lustre must be built with --enable-pinger for replay-dual"
+ stop ost
+ exit 1
+ fi
-start ost2 --reformat $OSTLCONFARGS
-[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
-start mds $MDSLCONFARGS --reformat
-zconf_mount $MOUNT
-zconf_mount $MOUNT2
+ start ost2 --reformat $OSTLCONFARGS
+ [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
+ for mds in `mds_list`; do
+ start $mds --reformat $MDSLCONFARGS
+ done
+ grep " $MOUNT " /proc/mounts || zconf_mount `hostname` $MOUNT
+ grep " $MOUNT2 " /proc/mounts || zconf_mount `hostname` $MOUNT2
-echo $TIMEOUT > /proc/sys/lustre/timeout
-echo $UPCALL > /proc/sys/lustre/upcall
+ echo $TIMEOUT > /proc/sys/lustre/timeout
+ echo $UPCALL > /proc/sys/lustre/upcall
+}
+$SETUP
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
+
test_1() {
touch $MOUNT1/a
- replay_barrier mds
+ replay_barrier mds1
touch $MOUNT2/b
- fail mds
+ fail mds1
checkstat $MOUNT2/a || return 1
checkstat $MOUNT1/b || return 2
rm $MOUNT2/a $MOUNT1/b
test_2() {
- replay_barrier mds
+ replay_barrier mds1
mkdir $MOUNT1/adir
- fail mds
+ fail mds1
checkstat $MOUNT2/adir || return 1
rmdir $MOUNT2/adir
checkstat $MOUNT2/adir && return 2
run_test 2 "|X| mkdir adir"
test_3() {
- replay_barrier mds
+ replay_barrier mds1
mkdir $MOUNT1/adir
mkdir $MOUNT2/adir/bdir
- fail mds
+ fail mds1
checkstat $MOUNT2/adir || return 1
checkstat $MOUNT1/adir/bdir || return 2
rmdir $MOUNT2/adir/bdir $MOUNT1/adir
test_4() {
mkdir $MOUNT1/adir
- replay_barrier mds
+ replay_barrier mds1
mkdir $MOUNT1/adir && return 1
mkdir $MOUNT2/adir/bdir
- fail mds
+ fail mds1
checkstat $MOUNT2/adir || return 2
checkstat $MOUNT1/adir/bdir || return 3
# give multiop a chance to open
sleep 1
rm -f $MOUNT1/a
- replay_barrier mds
+ replay_barrier mds1
kill -USR1 $pid
wait $pid || return 1
- fail mds
+ fail mds1
[ -e $MOUNT2/a ] && return 2
return 0
}
# give multiop a chance to open
sleep 1
rm -f $MOUNT1/a
- replay_barrier mds
+ replay_barrier mds1
kill -USR1 $pid1
wait $pid1 || return 1
- fail mds
+ fail mds1
kill -USR1 $pid2
wait $pid2 || return 1
[ -e $MOUNT2/a ] && return 2
}
run_test 6 "open1, open2, unlink |X| close1 [fail mds] close2"
+test_6b() {
+ mcreate $MOUNT1/a
+ multiop $MOUNT2/a o_c &
+ pid1=$!
+ multiop $MOUNT1/a o_c &
+ pid2=$!
+ # give multiop a chance to open
+ sleep 1
+ rm -f $MOUNT1/a
+ replay_barrier mds1
+ kill -USR1 $pid2
+ wait $pid2 || return 1
+
+ fail mds1
+ kill -USR1 $pid1
+ wait $pid1 || return 1
+ [ -e $MOUNT2/a ] && return 2
+ return 0
+}
+run_test 6b "open1, open2, unlink |X| close2 [fail mds] close1"
+
+test_7() {
+ replay_barrier mds1
+ createmany -o $MOUNT1/$tfile- 25
+ createmany -o $MOUNT2/$tfile-2- 1
+ createmany -o $MOUNT1/$tfile-3- 25
+ umount $MOUNT2
+
+ facet_failover mds1
+ # expect failover to fail
+ df $MOUNT && return 1
+
+# 3313 - current fix for 3313 prevents any reply here
+# unlinkmany $MOUNT1/$tfile- 25 || return 2
+
+ zconf_mount `hostname` $MOUNT2
+ return 0
+}
+run_test 7 "timeouts waiting for lost client during replay"
+
+
+test_8() {
+ replay_barrier mds1
+ drop_reint_reply "mcreate $MOUNT1/$tfile" || return 1
+ fail mds1
+ checkstat $MOUNT2/$tfile || return 2
+ rm $MOUNT1/$tfile || return 3
+
+ return 0
+}
+run_test 8 "replay of resent request"
+
+test_9() {
+ replay_barrier mds1
+ mcreate $MOUNT1/$tfile-1
+ mcreate $MOUNT2/$tfile-2
+ # drop first reint reply
+ sysctl -w lustre.fail_loc=0x80000119
+ fail mds1
+ sysctl -w lustre.fail_loc=0
+
+ rm $MOUNT1/$tfile-[1,2] || return 1
+
+ return 0
+}
+run_test 9 "resending a replayed create"
+
+test_10() {
+ mcreate $MOUNT1/$tfile-1
+ replay_barrier mds1
+ munlink $MOUNT1/$tfile-1
+ mcreate $MOUNT2/$tfile-2
+ # drop first reint reply
+ sysctl -w lustre.fail_loc=0x80000119
+ fail mds1
+ sysctl -w lustre.fail_loc=0
+
+ checkstat $MOUNT1/$tfile-1 && return 1
+ checkstat $MOUNT1/$tfile-2 || return 2
+ rm $MOUNT1/$tfile-2
+
+ return 0
+}
+run_test 10 "resending a replayed unlink"
+
+test_11() {
+ replay_barrier mds1
+ mcreate $MOUNT1/$tfile-1
+ mcreate $MOUNT2/$tfile-2
+ mcreate $MOUNT1/$tfile-3
+ mcreate $MOUNT2/$tfile-4
+ mcreate $MOUNT1/$tfile-5
+ # drop all reint replies for a while
+ sysctl -w lustre.fail_loc=0x0119
+ facet_failover mds1
+ #sleep for while, let both clients reconnect and timeout
+ sleep $((TIMEOUT * 2))
+ sysctl -w lustre.fail_loc=0
+
+ rm $MOUNT1/$tfile-[1-5] || return 1
+
+ return 0
+}
+run_test 11 "both clients timeout during replay"
+
+test_12() {
+ replay_barrier mds1
+
+ multiop $DIR/$tfile mo_c &
+ MULTIPID=$!
+ sleep 5
+
+ # drop first enqueue
+ sysctl -w lustre.fail_loc=0x80000302
+ facet_failover mds1
+ df $MOUNT || return 1
+ sysctl -w lustre.fail_loc=0
+
+ ls $DIR/$tfile
+ $CHECKSTAT -t file $DIR/$tfile || return 2
+ kill -USR1 $MULTIPID || return 3
+ wait $MULTIPID || return 4
+ rm $DIR/$tfile
+
+ return 0
+}
+run_test 12 "open resend timeout"
+
+test_13() {
+ multiop $DIR/$tfile mo_c &
+ MULTIPID=$!
+ sleep 5
+
+ replay_barrier mds1
+
+ kill -USR1 $MULTIPID || return 3
+ wait $MULTIPID || return 4
+
+ # drop close
+ sysctl -w lustre.fail_loc=0x80000115
+ facet_failover mds1
+ df $MOUNT || return 1
+ sysctl -w lustre.fail_loc=0
+
+ ls $DIR/$tfile
+ $CHECKSTAT -t file $DIR/$tfile || return 2
+ rm $DIR/$tfile
+
+ return 0
+}
+run_test 13 "close resend timeout"
+
+test_20 () {
+ replay_barrier mds1
+ multiop $MOUNT2/$tfile O_c &
+ pid2=$!
+ multiop $MOUNT1/$tfile O_c &
+ pid1=$!
+ # give multiop a chance to open
+ sleep 1
+ kill -USR1 $pid2
+ kill -USR1 $pid1
+ sleep 1
+ umount $MOUNT2
+ facet_failover mds1
+ df || df || return 1
+ zconf_mount `hostname` $MOUNT2
+}
+run_test 20 "replay open, Abort recovery, don't assert (3892)"
if [ "$ONLY" != "setup" ]; then
equals_msg test complete, cleaning up
- cleanup
+ $CLEANUP
fi
git://git.whamcloud.com / fs / lustre-release.git / blobdiff